/* USER CODE BEGIN Header */
/**
 ******************************************************************************
 * @file           : main.c
 * @brief          : Main program body
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
 * All rights reserved.</center></h2>
 *
 * This software component is licensed by ST under Ultimate Liberty license
 * SLA0044, the "License"; You may not use this file except in compliance with
 * the License. You may obtain a copy of the License at:
 *                             www.st.com/SLA0044
 *
 *
 *                             Bonjour ! J'aime beaucoup l'informatique industrielle
 *
 ******************************************************************************
 */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "cmsis_os.h"
#include "lwip.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "stm32746g_discovery_lcd.h"
#include "stm32746g_discovery_ts.h"
#include "stdio.h"
#include "semphr.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc1;
ADC_HandleTypeDef hadc3;

CRC_HandleTypeDef hcrc;

DAC_HandleTypeDef hdac;

DMA2D_HandleTypeDef hdma2d;

LTDC_HandleTypeDef hltdc;

RNG_HandleTypeDef hrng;

SPI_HandleTypeDef hspi2;

TIM_HandleTypeDef htim1;
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3;
TIM_HandleTypeDef htim5;
TIM_HandleTypeDef htim8;

SDRAM_HandleTypeDef hsdram1;

osThreadId GameMasterHandle;
osThreadId Joueur_1Handle;
osThreadId Block_EnemieHandle;
osThreadId ProjectileHandle;
osThreadId IRQ_BPHandle;
osThreadId tir_joueurHandle;
osMessageQId Queue_JHandle;
osMessageQId Queue_NHandle;
osMessageQId Queue_FHandle;
osMessageQId Queue_EHandle;
/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_ADC3_Init(void);
static void MX_LTDC_Init(void);
static void MX_SPI2_Init(void);
static void MX_TIM1_Init(void);
static void MX_TIM2_Init(void);
static void MX_TIM3_Init(void);
static void MX_TIM5_Init(void);
static void MX_TIM8_Init(void);
static void MX_ADC1_Init(void);
static void MX_DAC_Init(void);
static void MX_FMC_Init(void);
static void MX_DMA2D_Init(void);
static void MX_CRC_Init(void);
static void MX_RNG_Init(void);
void f_GameMaster(void const * argument);
void f_Joueur_1(void const * argument);
void f_block_enemie(void const * argument);
void f_projectile(void const * argument);
void f_IRQ_BP(void const * argument);
void f_tir_joueur(void const * argument);

/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */


/* The semaphore used to synchronise the button push task with the interrupt. */
static xSemaphoreHandle xButtonSemaphore;

#define butDEBOUNCE_DELAY	2000


struct Missile
{
	uint16_t x;
	uint16_t y;
	uint8_t dx;
	uint8_t dy;
	uint8_t equipe;
	uint32_t color;
	uint8_t damage;
	uint8_t valide;
};

struct Joueur
{
	// uint32_t et pas 16 car fonction d'affichage bitmap (j'en sais pas plus)
	uint32_t x;
	uint32_t y;
	uint8_t dx;
	uint8_t dy;
	uint8_t health;
	struct Missile missile;
};

struct Monster
{
	uint32_t x;
	uint32_t y;
	uint8_t pbmp;
	struct Missile missile;
	uint8_t type;
	uint8_t health;

};


// Définition des paramètres du joueurs

struct Joueur joueur = {10, 10, 1, 1, 3};

uint8_t LED = 1;

uint32_t LCD_COLOR_BACKGROUND = LCD_COLOR_BLACK;

// Number of waves of enemies before the game is won.

uint8_t waves_left = 10;

// La limite au dela de laquelle les ennemis ne peuvent pas être (utilisé pour
uint32_t Limit_ennemis_x = 50;


/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */
  char text[50] = {};
  static TS_StateTypeDef TS_State;
  ADC_ChannelConfTypeDef sConfig = {0};
  sConfig.Rank = ADC_REGULAR_RANK_1;
  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;



  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_ADC3_Init();
  MX_LTDC_Init();
  MX_SPI2_Init();
  MX_TIM1_Init();
  MX_TIM2_Init();
  MX_TIM3_Init();
  MX_TIM5_Init();
  MX_TIM8_Init();
  MX_ADC1_Init();
  MX_DAC_Init();
  MX_FMC_Init();
  MX_DMA2D_Init();
  MX_CRC_Init();
  MX_RNG_Init();
  /* USER CODE BEGIN 2 */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1,
                           LCD_FB_START_ADDRESS + BSP_LCD_GetXSize() * BSP_LCD_GetYSize() * 4);
  BSP_LCD_DisplayOn();
  BSP_LCD_SelectLayer(1);
  BSP_LCD_Clear(LCD_COLOR_BLACK);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLACK);

  BSP_TS_Init(BSP_LCD_GetXSize(), BSP_LCD_GetYSize());

  /* USER CODE END 2 */

  /* USER CODE BEGIN RTOS_MUTEX */
  /* add mutexes, ... */
  /* USER CODE END RTOS_MUTEX */

  /* USER CODE BEGIN RTOS_SEMAPHORES */
  /* add semaphores, ... */
  /* USER CODE END RTOS_SEMAPHORES */

  /* USER CODE BEGIN RTOS_TIMERS */
  /* start timers, add new ones, ... */
  /* USER CODE END RTOS_TIMERS */

  /* Create the queue(s) */
  /* definition and creation of Queue_J */
  osMessageQDef(Queue_J, 16, uint16_t);
  Queue_JHandle = osMessageCreate(osMessageQ(Queue_J), NULL);

  /* definition and creation of Queue_N */
  osMessageQDef(Queue_N, 16, uint16_t);
  Queue_NHandle = osMessageCreate(osMessageQ(Queue_N), NULL);

  /* definition and creation of Queue_F */
  osMessageQDef(Queue_F, 16, uint16_t);
  Queue_FHandle = osMessageCreate(osMessageQ(Queue_F), NULL);

  /* definition and creation of Queue_E */
  osMessageQDef(Queue_E, 16, uint16_t);
  Queue_EHandle = osMessageCreate(osMessageQ(Queue_E), NULL);

  /* USER CODE BEGIN RTOS_QUEUES */
  /* add queues, ... */
  /* USER CODE END RTOS_QUEUES */

  /* Create the thread(s) */
  /* definition and creation of GameMaster */
  osThreadDef(GameMaster, f_GameMaster, osPriorityNormal, 0, 128);
  GameMasterHandle = osThreadCreate(osThread(GameMaster), NULL);

  /* definition and creation of Joueur_1 */
  osThreadDef(Joueur_1, f_Joueur_1, osPriorityNormal, 0, 128);
  Joueur_1Handle = osThreadCreate(osThread(Joueur_1), NULL);

  /* definition and creation of Block_Enemie */
  osThreadDef(Block_Enemie, f_block_enemie, osPriorityIdle, 0, 128);
  Block_EnemieHandle = osThreadCreate(osThread(Block_Enemie), NULL);

  /* definition and creation of Projectile */
  osThreadDef(Projectile, f_projectile, osPriorityNormal, 0, 128);
  ProjectileHandle = osThreadCreate(osThread(Projectile), NULL);

  /* definition and creation of IRQ_BP */
  osThreadDef(IRQ_BP, f_IRQ_BP, osPriorityHigh, 0, 128);
  IRQ_BPHandle = osThreadCreate(osThread(IRQ_BP), NULL);

  /* definition and creation of tir_joueur */
  osThreadDef(tir_joueur, f_tir_joueur, osPriorityNormal, 0, 128);
  tir_joueurHandle = osThreadCreate(osThread(tir_joueur), NULL);

  /* USER CODE BEGIN RTOS_THREADS */
  /* add threads, ... */
  /* USER CODE END RTOS_THREADS */

  /* Start scheduler */
  osKernelStart();

  /* We should never get here as control is now taken by the scheduler */
  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* Code de base */
    HAL_GPIO_WritePin(LED13_GPIO_Port, LED13_Pin,
                      HAL_GPIO_ReadPin(BP1_GPIO_Port, BP1_Pin));
    HAL_GPIO_WritePin(LED14_GPIO_Port, LED14_Pin,
                      HAL_GPIO_ReadPin(BP2_GPIO_Port, BP2_Pin));
    sprintf(text, "BP1 : %d", HAL_GPIO_ReadPin(BP1_GPIO_Port, BP1_Pin));
    BSP_LCD_DisplayStringAtLine(5, (uint8_t *)text);


      ;

    sConfig.Channel = ADC_CHANNEL_7;
    HAL_ADC_ConfigChannel(&hadc3, &sConfig);
    HAL_ADC_Start(&hadc3);

    sConfig.Channel = ADC_CHANNEL_6;
	HAL_ADC_ConfigChannel(&hadc3, &sConfig);
	HAL_ADC_Start(&hadc3);
    sConfig.Channel = ADC_CHANNEL_8;
    HAL_ADC_ConfigChannel(&hadc3, &sConfig);
    HAL_ADC_Start(&hadc3);

    HAL_ADC_Start(&hadc1);



    BSP_TS_GetState(&TS_State);
    if (TS_State.touchDetected)
    {
      BSP_LCD_FillCircle(TS_State.touchX[0], TS_State.touchY[0], 4);
    }
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};

  /** Configure LSE Drive Capability
  */
  HAL_PWR_EnableBkUpAccess();
  /** Configure the main internal regulator output voltage
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 25;
  RCC_OscInitStruct.PLL.PLLN = 400;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }
  /** Activate the Over-Drive mode
  */
  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
  {
    Error_Handler();
  }
  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6) != HAL_OK)
  {
    Error_Handler();
  }
  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC|RCC_PERIPHCLK_CLK48;
  PeriphClkInitStruct.PLLSAI.PLLSAIN = 384;
  PeriphClkInitStruct.PLLSAI.PLLSAIR = 5;
  PeriphClkInitStruct.PLLSAI.PLLSAIQ = 2;
  PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV8;
  PeriphClkInitStruct.PLLSAIDivQ = 1;
  PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;
  PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48SOURCE_PLLSAIP;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
  {
    Error_Handler();
  }
}

/**
  * @brief ADC1 Initialization Function
  * @param None
  * @retval None
  */
static void MX_ADC1_Init(void)
{

  /* USER CODE BEGIN ADC1_Init 0 */

  /* USER CODE END ADC1_Init 0 */

  ADC_ChannelConfTypeDef sConfig = {0};

  /* USER CODE BEGIN ADC1_Init 1 */

  /* USER CODE END ADC1_Init 1 */
  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
  */
  hadc1.Instance = ADC1;
  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
  hadc1.Init.ContinuousConvMode = DISABLE;
  hadc1.Init.DiscontinuousConvMode = DISABLE;
  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
  hadc1.Init.NbrOfConversion = 1;
  hadc1.Init.DMAContinuousRequests = DISABLE;
  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
  if (HAL_ADC_Init(&hadc1) != HAL_OK)
  {
    Error_Handler();
  }
  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
  */
  sConfig.Channel = ADC_CHANNEL_0;
  sConfig.Rank = ADC_REGULAR_RANK_1;
  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN ADC1_Init 2 */

  /* USER CODE END ADC1_Init 2 */

}

/**
  * @brief ADC3 Initialization Function
  * @param None
  * @retval None
  */
static void MX_ADC3_Init(void)
{

  /* USER CODE BEGIN ADC3_Init 0 */

  /* USER CODE END ADC3_Init 0 */

  ADC_ChannelConfTypeDef sConfig = {0};

  /* USER CODE BEGIN ADC3_Init 1 */

  /* USER CODE END ADC3_Init 1 */
  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
  */
  hadc3.Instance = ADC3;
  hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
  hadc3.Init.Resolution = ADC_RESOLUTION_12B;
  hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
  hadc3.Init.ContinuousConvMode = DISABLE;
  hadc3.Init.DiscontinuousConvMode = DISABLE;
  hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
  hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
  hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
  hadc3.Init.NbrOfConversion = 1;
  hadc3.Init.DMAContinuousRequests = DISABLE;
  hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
  if (HAL_ADC_Init(&hadc3) != HAL_OK)
  {
    Error_Handler();
  }
  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
  */
  sConfig.Channel = ADC_CHANNEL_8;
  sConfig.Rank = ADC_REGULAR_RANK_1;
  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN ADC3_Init 2 */

  /* USER CODE END ADC3_Init 2 */

}

/**
  * @brief CRC Initialization Function
  * @param None
  * @retval None
  */
static void MX_CRC_Init(void)
{

  /* USER CODE BEGIN CRC_Init 0 */

  /* USER CODE END CRC_Init 0 */

  /* USER CODE BEGIN CRC_Init 1 */

  /* USER CODE END CRC_Init 1 */
  hcrc.Instance = CRC;
  hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;
  hcrc.Init.DefaultInitValueUse = DEFAULT_INIT_VALUE_ENABLE;
  hcrc.Init.InputDataInversionMode = CRC_INPUTDATA_INVERSION_NONE;
  hcrc.Init.OutputDataInversionMode = CRC_OUTPUTDATA_INVERSION_DISABLE;
  hcrc.InputDataFormat = CRC_INPUTDATA_FORMAT_BYTES;
  if (HAL_CRC_Init(&hcrc) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN CRC_Init 2 */

  /* USER CODE END CRC_Init 2 */

}

/**
  * @brief DAC Initialization Function
  * @param None
  * @retval None
  */
static void MX_DAC_Init(void)
{

  /* USER CODE BEGIN DAC_Init 0 */

  /* USER CODE END DAC_Init 0 */

  DAC_ChannelConfTypeDef sConfig = {0};

  /* USER CODE BEGIN DAC_Init 1 */

  /* USER CODE END DAC_Init 1 */
  /** DAC Initialization
  */
  hdac.Instance = DAC;
  if (HAL_DAC_Init(&hdac) != HAL_OK)
  {
    Error_Handler();
  }
  /** DAC channel OUT1 config
  */
  sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
  sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
  if (HAL_DAC_ConfigChannel(&hdac, &sConfig, DAC_CHANNEL_1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN DAC_Init 2 */

  /* USER CODE END DAC_Init 2 */

}

/**
  * @brief DMA2D Initialization Function
  * @param None
  * @retval None
  */
static void MX_DMA2D_Init(void)
{

  /* USER CODE BEGIN DMA2D_Init 0 */

  /* USER CODE END DMA2D_Init 0 */

  /* USER CODE BEGIN DMA2D_Init 1 */

  /* USER CODE END DMA2D_Init 1 */
  hdma2d.Instance = DMA2D;
  hdma2d.Init.Mode = DMA2D_M2M;
  hdma2d.Init.ColorMode = DMA2D_OUTPUT_ARGB8888;
  hdma2d.Init.OutputOffset = 0;
  hdma2d.LayerCfg[1].InputOffset = 0;
  hdma2d.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888;
  hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
  hdma2d.LayerCfg[1].InputAlpha = 0;
  if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
  {
    Error_Handler();
  }
  if (HAL_DMA2D_ConfigLayer(&hdma2d, 1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN DMA2D_Init 2 */

  /* USER CODE END DMA2D_Init 2 */

}

/**
  * @brief LTDC Initialization Function
  * @param None
  * @retval None
  */
static void MX_LTDC_Init(void)
{

  /* USER CODE BEGIN LTDC_Init 0 */

  /* USER CODE END LTDC_Init 0 */

  LTDC_LayerCfgTypeDef pLayerCfg = {0};

  /* USER CODE BEGIN LTDC_Init 1 */

  /* USER CODE END LTDC_Init 1 */
  hltdc.Instance = LTDC;
  hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL;
  hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL;
  hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL;
  hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
  hltdc.Init.HorizontalSync = 40;
  hltdc.Init.VerticalSync = 9;
  hltdc.Init.AccumulatedHBP = 53;
  hltdc.Init.AccumulatedVBP = 11;
  hltdc.Init.AccumulatedActiveW = 533;
  hltdc.Init.AccumulatedActiveH = 283;
  hltdc.Init.TotalWidth = 565;
  hltdc.Init.TotalHeigh = 285;
  hltdc.Init.Backcolor.Blue = 0;
  hltdc.Init.Backcolor.Green = 0;
  hltdc.Init.Backcolor.Red = 0;
  if (HAL_LTDC_Init(&hltdc) != HAL_OK)
  {
    Error_Handler();
  }
  pLayerCfg.WindowX0 = 0;
  pLayerCfg.WindowX1 = 480;
  pLayerCfg.WindowY0 = 0;
  pLayerCfg.WindowY1 = 272;
  pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
  pLayerCfg.Alpha = 255;
  pLayerCfg.Alpha0 = 0;
  pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
  pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
  pLayerCfg.FBStartAdress = 0xC0000000;
  pLayerCfg.ImageWidth = 480;
  pLayerCfg.ImageHeight = 272;
  pLayerCfg.Backcolor.Blue = 0;
  pLayerCfg.Backcolor.Green = 0;
  pLayerCfg.Backcolor.Red = 0;
  if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg, 0) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN LTDC_Init 2 */

  /* USER CODE END LTDC_Init 2 */

}

/**
  * @brief RNG Initialization Function
  * @param None
  * @retval None
  */
static void MX_RNG_Init(void)
{

  /* USER CODE BEGIN RNG_Init 0 */

  /* USER CODE END RNG_Init 0 */

  /* USER CODE BEGIN RNG_Init 1 */

  /* USER CODE END RNG_Init 1 */
  hrng.Instance = RNG;
  if (HAL_RNG_Init(&hrng) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN RNG_Init 2 */

  /* USER CODE END RNG_Init 2 */

}

/**
  * @brief SPI2 Initialization Function
  * @param None
  * @retval None
  */
static void MX_SPI2_Init(void)
{

  /* USER CODE BEGIN SPI2_Init 0 */

  /* USER CODE END SPI2_Init 0 */

  /* USER CODE BEGIN SPI2_Init 1 */

  /* USER CODE END SPI2_Init 1 */
  /* SPI2 parameter configuration*/
  hspi2.Instance = SPI2;
  hspi2.Init.Mode = SPI_MODE_MASTER;
  hspi2.Init.Direction = SPI_DIRECTION_2LINES;
  hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
  hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
  hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
  hspi2.Init.NSS = SPI_NSS_HARD_OUTPUT;
  hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
  hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
  hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
  hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
  hspi2.Init.CRCPolynomial = 7;
  hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
  hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
  if (HAL_SPI_Init(&hspi2) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN SPI2_Init 2 */

  /* USER CODE END SPI2_Init 2 */

}

/**
  * @brief TIM1 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM1_Init(void)
{

  /* USER CODE BEGIN TIM1_Init 0 */

  /* USER CODE END TIM1_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};

  /* USER CODE BEGIN TIM1_Init 1 */

  /* USER CODE END TIM1_Init 1 */
  htim1.Instance = TIM1;
  htim1.Init.Prescaler = 0;
  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim1.Init.Period = 65535;
  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim1.Init.RepetitionCounter = 0;
  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM1_Init 2 */

  /* USER CODE END TIM1_Init 2 */

}

/**
  * @brief TIM2 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM2_Init(void)
{

  /* USER CODE BEGIN TIM2_Init 0 */

  /* USER CODE END TIM2_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};

  /* USER CODE BEGIN TIM2_Init 1 */

  /* USER CODE END TIM2_Init 1 */
  htim2.Instance = TIM2;
  htim2.Init.Prescaler = 0;
  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim2.Init.Period = 4294967295;
  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
  if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM2_Init 2 */

  /* USER CODE END TIM2_Init 2 */

}

/**
  * @brief TIM3 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM3_Init(void)
{

  /* USER CODE BEGIN TIM3_Init 0 */

  /* USER CODE END TIM3_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_SlaveConfigTypeDef sSlaveConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};
  TIM_OC_InitTypeDef sConfigOC = {0};

  /* USER CODE BEGIN TIM3_Init 1 */

  /* USER CODE END TIM3_Init 1 */
  htim3.Instance = TIM3;
  htim3.Init.Prescaler = 0;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = 65535;
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
  if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
  {
    Error_Handler();
  }
  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_DISABLE;
  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
  if (HAL_TIM_SlaveConfigSynchro(&htim3, &sSlaveConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM3_Init 2 */

  /* USER CODE END TIM3_Init 2 */
  HAL_TIM_MspPostInit(&htim3);

}

/**
  * @brief TIM5 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM5_Init(void)
{

  /* USER CODE BEGIN TIM5_Init 0 */

  /* USER CODE END TIM5_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};

  /* USER CODE BEGIN TIM5_Init 1 */

  /* USER CODE END TIM5_Init 1 */
  htim5.Instance = TIM5;
  htim5.Init.Prescaler = 0;
  htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim5.Init.Period = 4294967295;
  htim5.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim5.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
  if (HAL_TIM_Base_Init(&htim5) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim5, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim5, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM5_Init 2 */

  /* USER CODE END TIM5_Init 2 */

}

/**
  * @brief TIM8 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM8_Init(void)
{

  /* USER CODE BEGIN TIM8_Init 0 */

  /* USER CODE END TIM8_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};
  TIM_OC_InitTypeDef sConfigOC = {0};
  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};

  /* USER CODE BEGIN TIM8_Init 1 */

  /* USER CODE END TIM8_Init 1 */
  htim8.Instance = TIM8;
  htim8.Init.Prescaler = 0;
  htim8.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim8.Init.Period = 65535;
  htim8.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim8.Init.RepetitionCounter = 0;
  htim8.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
  if (HAL_TIM_Base_Init(&htim8) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim8, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  if (HAL_TIM_PWM_Init(&htim8) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
  if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
  {
    Error_Handler();
  }
  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
  sBreakDeadTimeConfig.DeadTime = 0;
  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
  sBreakDeadTimeConfig.BreakFilter = 0;
  sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
  sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
  sBreakDeadTimeConfig.Break2Filter = 0;
  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
  if (HAL_TIMEx_ConfigBreakDeadTime(&htim8, &sBreakDeadTimeConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM8_Init 2 */

  /* USER CODE END TIM8_Init 2 */
  HAL_TIM_MspPostInit(&htim8);

}

/* FMC initialization function */
static void MX_FMC_Init(void)
{

  /* USER CODE BEGIN FMC_Init 0 */

  /* USER CODE END FMC_Init 0 */

  FMC_SDRAM_TimingTypeDef SdramTiming = {0};

  /* USER CODE BEGIN FMC_Init 1 */

  /* USER CODE END FMC_Init 1 */

  /** Perform the SDRAM1 memory initialization sequence
  */
  hsdram1.Instance = FMC_SDRAM_DEVICE;
  /* hsdram1.Init */
  hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
  hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
  hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
  hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
  hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
  hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_1;
  hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
  hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_DISABLE;
  hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE;
  hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
  /* SdramTiming */
  SdramTiming.LoadToActiveDelay = 16;
  SdramTiming.ExitSelfRefreshDelay = 16;
  SdramTiming.SelfRefreshTime = 16;
  SdramTiming.RowCycleDelay = 16;
  SdramTiming.WriteRecoveryTime = 16;
  SdramTiming.RPDelay = 16;
  SdramTiming.RCDDelay = 16;

  if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
  {
    Error_Handler( );
  }

  /* USER CODE BEGIN FMC_Init 2 */

  /* USER CODE END FMC_Init 2 */
}

/**
  * @brief GPIO Initialization Function
  * @param None
  * @retval None
  */
static void MX_GPIO_Init(void)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};

  /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOE_CLK_ENABLE();
  __HAL_RCC_GPIOG_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();
  __HAL_RCC_GPIOJ_CLK_ENABLE();
  __HAL_RCC_GPIOD_CLK_ENABLE();
  __HAL_RCC_GPIOI_CLK_ENABLE();
  __HAL_RCC_GPIOK_CLK_ENABLE();
  __HAL_RCC_GPIOC_CLK_ENABLE();
  __HAL_RCC_GPIOF_CLK_ENABLE();
  __HAL_RCC_GPIOH_CLK_ENABLE();

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(GPIOE, LED14_Pin|LED15_Pin, GPIO_PIN_RESET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(OTG_FS_PowerSwitchOn_GPIO_Port, OTG_FS_PowerSwitchOn_Pin, GPIO_PIN_SET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(LED16_GPIO_Port, LED16_Pin, GPIO_PIN_RESET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_RESET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_Port, LCD_BL_CTRL_Pin, GPIO_PIN_SET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(LCD_DISP_GPIO_Port, LCD_DISP_Pin, GPIO_PIN_SET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(GPIOH, LED13_Pin|LED17_Pin|LED11_Pin|LED12_Pin
                          |LED2_Pin|LED18_Pin, GPIO_PIN_RESET);

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(EXT_RST_GPIO_Port, EXT_RST_Pin, GPIO_PIN_RESET);

  /*Configure GPIO pin : PE3 */
  GPIO_InitStruct.Pin = GPIO_PIN_3;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

  /*Configure GPIO pins : ARDUINO_SCL_D15_Pin ARDUINO_SDA_D14_Pin */
  GPIO_InitStruct.Pin = ARDUINO_SCL_D15_Pin|ARDUINO_SDA_D14_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

  /*Configure GPIO pins : ULPI_D7_Pin ULPI_D6_Pin ULPI_D5_Pin ULPI_D2_Pin
                           ULPI_D1_Pin ULPI_D4_Pin */
  GPIO_InitStruct.Pin = ULPI_D7_Pin|ULPI_D6_Pin|ULPI_D5_Pin|ULPI_D2_Pin
                          |ULPI_D1_Pin|ULPI_D4_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

  /*Configure GPIO pins : BP2_Pin BP1_Pin */
  GPIO_InitStruct.Pin = BP2_Pin|BP1_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

  /*Configure GPIO pins : LED14_Pin LED15_Pin */
  GPIO_InitStruct.Pin = LED14_Pin|LED15_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

  /*Configure GPIO pin : VCP_RX_Pin */
  GPIO_InitStruct.Pin = VCP_RX_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
  HAL_GPIO_Init(VCP_RX_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pin : OTG_FS_VBUS_Pin */
  GPIO_InitStruct.Pin = OTG_FS_VBUS_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(OTG_FS_VBUS_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pin : Audio_INT_Pin */
  GPIO_InitStruct.Pin = Audio_INT_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(Audio_INT_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pins : OTG_FS_PowerSwitchOn_Pin LED16_Pin */
  GPIO_InitStruct.Pin = OTG_FS_PowerSwitchOn_Pin|LED16_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);

  /*Configure GPIO pins : LED3_Pin LCD_DISP_Pin */
  GPIO_InitStruct.Pin = LED3_Pin|LCD_DISP_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);

  /*Configure GPIO pin : uSD_Detect_Pin */
  GPIO_InitStruct.Pin = uSD_Detect_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(uSD_Detect_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pin : LCD_BL_CTRL_Pin */
  GPIO_InitStruct.Pin = LCD_BL_CTRL_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(LCD_BL_CTRL_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pin : OTG_FS_OverCurrent_Pin */
  GPIO_InitStruct.Pin = OTG_FS_OverCurrent_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(OTG_FS_OverCurrent_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pins : TP3_Pin NC2_Pin */
  GPIO_InitStruct.Pin = TP3_Pin|NC2_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);

  /*Configure GPIO pins : LED13_Pin LED17_Pin LED11_Pin LED12_Pin
                           LED2_Pin LED18_Pin */
  GPIO_InitStruct.Pin = LED13_Pin|LED17_Pin|LED11_Pin|LED12_Pin
                          |LED2_Pin|LED18_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);

  /*Configure GPIO pin : VCP_TX_Pin */
  GPIO_InitStruct.Pin = VCP_TX_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
  HAL_GPIO_Init(VCP_TX_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pin : LCD_INT_Pin */
  GPIO_InitStruct.Pin = LCD_INT_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(LCD_INT_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pins : PC7 PC6 */
  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

  /*Configure GPIO pin : ULPI_NXT_Pin */
  GPIO_InitStruct.Pin = ULPI_NXT_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
  HAL_GPIO_Init(ULPI_NXT_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pins : BP_JOYSTICK_Pin RMII_RXER_Pin */
  GPIO_InitStruct.Pin = BP_JOYSTICK_Pin|RMII_RXER_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);

  /*Configure GPIO pin : PF7 */
  GPIO_InitStruct.Pin = GPIO_PIN_7;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF8_UART7;
  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);

  /*Configure GPIO pins : ULPI_STP_Pin ULPI_DIR_Pin */
  GPIO_InitStruct.Pin = ULPI_STP_Pin|ULPI_DIR_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

  /*Configure GPIO pin : EXT_RST_Pin */
  GPIO_InitStruct.Pin = EXT_RST_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(EXT_RST_GPIO_Port, &GPIO_InitStruct);

  /*Configure GPIO pins : LCD_SCL_Pin LCD_SDA_Pin */
  GPIO_InitStruct.Pin = LCD_SCL_Pin|LCD_SDA_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF4_I2C3;
  HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);

  /*Configure GPIO pins : ULPI_CLK_Pin ULPI_D0_Pin */
  GPIO_InitStruct.Pin = ULPI_CLK_Pin|ULPI_D0_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

}

/* USER CODE BEGIN 4 */


/* USER CODE END 4 */

/* USER CODE BEGIN Header_f_GameMaster */
/**
  * @brief  Function implementing the GameMaster thread.
  * @param  argument: Not used
  * @retval None
  */
/* USER CODE END Header_f_GameMaster */
void f_GameMaster(void const * argument)
{
  /* init code for LWIP */
  MX_LWIP_Init();
  /* USER CODE BEGIN 5 */
  TickType_t xLastWakeTime;
  const TickType_t xPeriodeTache = 10;
  // Si la variable end est à 1, le jeu s'arrete.
  uint8_t end = 0;

  /* Infinite loop */
  for (;;)
  {
	  xQueueReceive(Queue_FHandle, &end, 0);
	  if (end == 1){
		  vTaskDelete(Block_EnemieHandle);
		  vTaskDelete(ProjectileHandle);
		  vTaskDelete(Joueur_1Handle);

		  //TODO L'affichage de l'écran de fin et des scores
	  }

	  if (end == 0){
		  if (waves_left == 0){
			  vTaskDelete(Block_EnemieHandle);
			  vTaskDelete(ProjectileHandle);
			  vTaskDelete(Joueur_1Handle);

			  //TODO L'affichage de l'écran de fin et des scores
		  }
	  }




    vTaskDelayUntil(&xLastWakeTime, xPeriodeTache);
  }
  /* USER CODE END 5 */
}

/* USER CODE BEGIN Header_f_Joueur_1 */
/**
* @brief Function implementing the Joueur_1 thread.
* @param argument: Not used
* @retval None
*/
/* USER CODE END Header_f_Joueur_1 */
void f_Joueur_1(void const * argument)
{
  /* USER CODE BEGIN f_Joueur_1 */
  TickType_t xLastWakeTime;
  const TickType_t xPeriodeTache = 10;
  uint16_t Width = 20;
  uint16_t Height = 20;
  uint32_t joystick_h, joystick_v;
  uint8_t stop = 1;

  struct Missile missile;

  ADC_ChannelConfTypeDef sConfig3 = {0};
  sConfig3.Rank = ADC_REGULAR_RANK_1;
  sConfig3.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  sConfig3.Channel = ADC_CHANNEL_8;

  HAL_ADC_ConfigChannel(&hadc3, &sConfig3);
  HAL_ADC_Start(&hadc3);

  ADC_ChannelConfTypeDef sConfig1 = {0};
  sConfig1.Rank = ADC_REGULAR_RANK_1;
  sConfig1.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  sConfig1.Channel = ADC_CHANNEL_0;

  HAL_ADC_ConfigChannel(&hadc1, &sConfig1);
  HAL_ADC_Start(&hadc1);

  // Paramètre de l'écran pour la reprouductibilité

  	uint32_t LCD_HEIGHT = BSP_LCD_GetXSize();
  	uint32_t LCD_WIDTH = BSP_LCD_GetYSize();

  /* Infinite loop */
  for (;;)
  {


	BSP_LCD_SetTextColor(LCD_COLOR_BACKGROUND);
	BSP_LCD_FillRect(joueur.x, joueur.y, Width, Height);

	// BSP_LCD_DrawBitmap(uint32_t Xpos, uint32_t Ypos, uint8_t *pbmp)
	HAL_ADC_ConfigChannel(&hadc3, &sConfig3);
	HAL_ADC_Start(&hadc3);
	while (HAL_ADC_PollForConversion(&hadc3, 100) != HAL_OK);
	joystick_h = HAL_ADC_GetValue(&hadc3);

	HAL_ADC_ConfigChannel(&hadc1, &sConfig1);
	HAL_ADC_Start(&hadc1);
	while (HAL_ADC_PollForConversion(&hadc1, 100) != HAL_OK);
	joystick_v = HAL_ADC_GetValue(&hadc1);

	if ((joueur.y < LCD_WIDTH- Width - joueur.dy)&&(joystick_h < 1900)) joueur.y += joueur.dy;
	if ((joueur.y > joueur.dy)&&(joystick_h > 2100)) joueur.y -= joueur.dy;

	if ((joueur.x < LCD_HEIGHT - Height - joueur.dx)&&(joystick_v < 1900)) joueur.x += joueur.dx;
	if ((joueur.x >  joueur.dx)&&(joystick_v > 2100)) joueur.x -= joueur.dx;


	BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
	BSP_LCD_FillRect(joueur.x, joueur.y, Width, Height);

	if (xQueueReceive(Queue_JHandle, &missile, 0) == pdPASS)
		joueur.health = joueur.health - missile.damage;
	// On envoie 1 si le joueur est mort et on envoie 0 si les enemis sont tous morts
		if (joueur.health == 0)xQueueSend(Queue_FHandle,&stop,0);

	// TODO La condition sur une entrée analogique pour envoyer un missile
//	struct Missile missile = {joueur.x, joueur.y,joueur.missile.dx, joueur.missile.dy, 1, joueur.missile.color, joueur.missile.damage};
//	xQueueSend(Queue_NHandle,&missile,0);
    vTaskDelayUntil(&xLastWakeTime, xPeriodeTache);
  }
  /* USER CODE END f_Joueur_1 */
}

/* USER CODE BEGIN Header_f_block_enemie */
/**
* @brief Function implementing the Block_Enemie thread.
* @param argument: Not used
* @retval None
*/
/* USER CODE END Header_f_block_enemie */
void f_block_enemie(void const * argument)
{
  /* USER CODE BEGIN f_block_enemie */
  TickType_t xLastWakeTime;
  const TickType_t xPeriodeTache = 10;
  uint8_t number_monsters = 30;
  struct Monster list_monsters[30];
  uint8_t end = 0;
  uint8_t deplacement = 1;
  struct Missile missile;
  /* Infinite loop */
  for (;;)
  {
	  xQueueReceive(Queue_EHandle, &missile, 0);
	  if (number_monsters == 0){
		  xQueueSend(Queue_FHandle, &end, 0);
	  }

	  for (int i=0;i< number_monsters;i++){
		  if (list_monsters[i].health > 0 ){
			  if ((missile.x == list_monsters[i].x)&&(missile.y == list_monsters[i].y))
			  {
				  list_monsters[i].health = list_monsters[i].health -1;
				  // Est ce que cette ligne va marcher sachant que je transmets l'adresse dans la queue ?
				  missile.valide = 0;
				  if (list_monsters[i].health == 0){
					  //TODO explosion du plaisir ?
					  number_monsters = number_monsters -1;
				  }
			  }

			  BSP_LCD_DrawBitmap(list_monsters[i].x, list_monsters[i].y, &list_monsters[i].pbmp);
			  // On alterne le deplacement des méchants comme dans le vrai jeux
			  //TODO est ce que ca va posé un décalage entre l'affichage et la hitboxe ?
			  list_monsters[i].x = list_monsters[i].x + deplacement*2;
		  }
	  }
	  deplacement = -1;



    vTaskDelayUntil(&xLastWakeTime, xPeriodeTache);
  }
  /* USER CODE END f_block_enemie */
}

/* USER CODE BEGIN Header_f_projectile */
/**
* @brief Function implementing the Projectile thread.
* @param argument: Not used
* @retval None
*/
/* USER CODE END Header_f_projectile */
void f_projectile(void const * argument)
{
  /* USER CODE BEGIN f_projectile */
  TickType_t xLastWakeTime;
  const TickType_t xPeriodeTache = 5000;
  /* Infinite loop */
  struct Missile liste_missile[20];
  struct Missile missile = {70, 70, 1, 0, 0, LCD_COLOR_WHITE,  1,1};
  uint8_t indice = 1;
  liste_missile[0] = missile;

  // Paramètre de l'écran pour la reprouductibilité

  	uint32_t LCD_HEIGHT = BSP_LCD_GetXSize();
  	uint32_t LCD_WIDTH = BSP_LCD_GetYSize();

  for (;;)
  {
	  //xQueueReceive(Queue_NHandle, &missile, 0);
	  //liste_missile[indice++] = missile;

	  for (int i=0;i< indice;i++)
	  {

		  // Si le missile n'est pas sur un bord
		  if (liste_missile[i].valide == 1)
		  {
			  // Si le missile appartient au joueur :
			  if (liste_missile[i].equipe == 0)
			  {
				  if (liste_missile[i].x >= Limit_ennemis_x)
				  {
					  xQueueSend(Queue_EHandle, &liste_missile+indice,0);
					  // TODO Une petite animation d'explosion ?
				  }

				  if ((liste_missile[i].x > 1)&&(liste_missile[i].x < LCD_HEIGHT-1)&&(liste_missile[i].y < LCD_WIDTH-1)&&(liste_missile[i].y > 1))
					{
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, LCD_COLOR_BACKGROUND);
					  liste_missile[i].x = liste_missile[i].x + liste_missile[i].dx ;
					  liste_missile[i].y = liste_missile[i].y + liste_missile[i].dy;
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, liste_missile[i].color);
					}
				  //TODO test sur tous les ennemis
				  else
				  {
					  liste_missile[i].valide = 0;
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, LCD_COLOR_BACKGROUND);
				  }
			  }
			  // Si le missile appartient aux ennemis
			  else if (liste_missile[i].equipe == 1)
			  {
				  if ((liste_missile[i].x == joueur.x)&&(liste_missile[i].y == joueur.y))
				  {
					  xQueueSend(Queue_JHandle, &liste_missile+indice,0);
					  liste_missile[i].valide = 0;
					  // TODO Une petite animation d'explosion ?
				  }
				  if ((liste_missile[i].x > 1)&&(liste_missile[i].x < LCD_HEIGHT-1)&&(liste_missile[i].y < LCD_WIDTH-1)&&(liste_missile[i].y > 1))
				  {
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, LCD_COLOR_BACKGROUND);
					  liste_missile[i].x = liste_missile[i].x + liste_missile[i].dx ;
					  liste_missile[i].y = liste_missile[i].y + liste_missile[i].dy;
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, liste_missile[i].color);
				  }
				  else
				  {
					  liste_missile[i].valide = 0;
					  BSP_LCD_DrawPixel(liste_missile[i].x, liste_missile[i].y, LCD_COLOR_BACKGROUND);
				  }
			  }

		  }
	  }
	  vTaskDelayUntil(&xLastWakeTime, xPeriodeTache);

  }
  /* USER CODE END f_projectile */
}

/* USER CODE BEGIN Header_f_IRQ_BP */
/**
* @brief Function implementing the IRQ_BP thread.
* @param argument: Not used
* @retval None
*/
/* USER CODE END Header_f_IRQ_BP */
void f_IRQ_BP(void const * argument)
{
  /* USER CODE BEGIN f_IRQ_BP */
	// Jsp pk long mais ca ne renvoie pas d'erreur. C'était initialement short sur google
	long sHigherPriorityTaskWoken = pdFALSE;

	/* 'Give' the semaphore to unblock the button task. */

	xSemaphoreGiveFromISR( xButtonSemaphore, &sHigherPriorityTaskWoken );

	/* If giving the semaphore unblocked a task, and the unblocked task has a
		priority that is higher than the currently running task, then
		sHigherPriorityTaskWoken will have been set to pdTRUE.  Passing a pdTRUE
		value to portYIELD_FROM_ISR() will cause this interrupt to return directly
		to the higher priority unblocked task. */
		portYIELD_FROM_ISR( sHigherPriorityTaskWoken );


  /* USER CODE END f_IRQ_BP */
}

/* USER CODE BEGIN Header_f_tir_joueur */
/**
* @brief Function implementing the tir_joueur thread.
* @param argument: Not used
* @retval None
*/
/* USER CODE END Header_f_tir_joueur */
void f_tir_joueur(void const * argument)
{
  /* USER CODE BEGIN f_tir_joueur */
	/* Ensure the semaphore is created before it gets used. */
	vSemaphoreCreateBinary( xButtonSemaphore );
  /* Infinite loop */
  for(;;)
  {

	  /* Block on the semaphore to wait for an interrupt event.  The semaphore
		is 'given' from f_IRQ_BP() below.  Using portMAX_DELAY as the
		block time will cause the task to block indefinitely provided
		INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h. */
		xSemaphoreTake( xButtonSemaphore, portMAX_DELAY );

		/* The button must have been pushed for this line to be executed.
		Simply toggle the LED. */
		HAL_GPIO_WritePin(LED14_GPIO_Port, LED14_Pin,!LED);

		/* Wait a short time then clear any pending button pushes as a crude
		method of debouncing the switch.  xSemaphoreTake() uses a block time of
		zero this time so it returns immediately rather than waiting for the
		interrupt to occur. */

		BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
		BSP_LCD_FillRect(50, 50, 40, 40);

		vTaskDelay( butDEBOUNCE_DELAY );
		xSemaphoreTake( xButtonSemaphore, 0 );
  }
  /* USER CODE END f_tir_joueur */
}

 /**
  * @brief  Period elapsed callback in non blocking mode
  * @note   This function is called  when TIM6 interrupt took place, inside
  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
  * a global variable "uwTick" used as application time base.
  * @param  htim : TIM handle
  * @retval None
  */
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
  /* USER CODE BEGIN Callback 0 */

  /* USER CODE END Callback 0 */
  if (htim->Instance == TIM6) {
    HAL_IncTick();
  }
  /* USER CODE BEGIN Callback 1 */

  /* USER CODE END Callback 1 */
}

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/