hostap/tests/hwsim/start.sh
Arnout Vandecappelle (Essensium/Mind) 222ff97bc3 tests: start.sh: fix logs/current symlink creation
Since 3bdc651a62, start.sh creates the logs/current symlink even if
LOGDIR was set in the environment, as is the case when using run-all.sh.
However, run-all.sh and start.sh use a separate 'date' invocation so the
resulting string may be different. Usually it is the same because the
two invocations immediately follow each other, *except* if run-all.sh
also does a build. In addition, if the user sets LOGDIR to something
else, the symlink is completely bogus.

Fix this by not relying on the 'date' invocation for creating the
symlink. Instead, use the basename of LOGDIR. To keep things consistent
with current behavior, only create the symlink if LOGDIR points to a
subdirectory of DIR/logs.

The following use cases now work reliably:
* run-all.sh with or without the -B option;
* manually calling start.sh followed by run-tests.py without setting
  LOGDIR.
* manually calling start.sh with LOGDIR set to a subdirectory of logs
  and calling run-tests.py without --logdir option (which makes it
  default to logs/current).
* run-all.sh with LOGDIR set to a subdirectory of logs.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-01-12 17:39:59 +02:00

258 lines
7.4 KiB
Bash
Executable file

#!/bin/sh
DIR="$( cd "$( dirname "$0" )" && pwd )"
WPAS=$DIR/../../wpa_supplicant/wpa_supplicant
WPACLI=$DIR/../../wpa_supplicant/wpa_cli
HAPD=$DIR/../../hostapd/hostapd
HAPD_AS=$DIR/../../hostapd/hostapd
HAPDCLI=$DIR/../../hostapd/hostapd_cli
WLANTEST=$DIR/../../wlantest/wlantest
HLR_AUC_GW=$DIR/../../hostapd/hlr_auc_gw
if [ -z "$LOGDIR" ] ; then
DATE="$(date +%s)"
LOGDIR="$DIR/logs/$DATE"
mkdir -p $LOGDIR
else
if [ -e $LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant ]; then
WPAS=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant
WPACLI=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_cli
# extra code coverage
$WPAS > /dev/null 2>&1
$WPAS -efoo -Ifoo -mfoo -ofoo -Ofoo -pfoo -Pfoo -h > /dev/null 2>&1
$WPAS -bfoo -B -Cfoo -q -W -N -L > /dev/null 2>&1
$WPAS -T -v > /dev/null 2>&1
$WPAS -u -z > /dev/null 2>&1
fi
if [ -e $LOGDIR/alt-hostapd/hostapd/hostapd ]; then
HAPD=$LOGDIR/alt-hostapd/hostapd/hostapd
HAPDCLI=$LOGDIR/alt-hostapd/hostapd/hostapd_cli
# extra code coverage
$HAPD > /dev/null 2>&1
$HAPD -v > /dev/null 2>&1
$HAPD -B -efoo -Pfoo -T -bfoo -h > /dev/null 2>&1
$HAPD -ufoo > /dev/null 2>&1
$HAPD -u00:11:22:33:44:55 > /dev/null 2>&1
$HAPD -gfoo > /dev/null 2>&1
$HAPD -Gfoo-not-exists > /dev/null 2>&1
$HAPD -z > /dev/null 2>&1
$HAPD -i foo1,foo2,foo3 > /dev/null 2>&1
fi
if [ -e $LOGDIR/alt-hostapd-as/hostapd/hostapd ]; then
HAPD_AS=$LOGDIR/alt-hostapd-as/hostapd/hostapd
fi
if [ -e $LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw ]; then
HLR_AUC_GW=$LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw
# extra code coverage
$HLR_AUC_GW > /dev/null 2>&1
$HLR_AUC_GW -Dfoo -i7 -sfoo -h > /dev/null 2>&1
$HLR_AUC_GW -i100 > /dev/null 2>&1
$HLR_AUC_GW -z > /dev/null 2>&1
fi
fi
LOGBASEDIR="$( cd "$(dirname "$LOGDIR")" && pwd )"
if test "$LOGBASEDIR" = "$DIR/logs" -a -w "$LOGBASEDIR" ; then
rm -rf "$LOGBASEDIR/current"
ln -sf "$(basename "$LOGDIR")" "$LOGBASEDIR/current"
fi
if groups | tr ' ' "\n" | grep -q ^admin$; then
GROUP=admin
elif groups | tr ' ' "\n" | grep -q ^wheel$; then
GROUP=wheel
else
GROUP=adm
fi
for i in 0 1 2; do
sed "s/ GROUP=.*$/ GROUP=$GROUP/" "$DIR/p2p$i.conf" > "$LOGDIR/p2p$i.conf"
done
sed "s/group=admin/group=$GROUP/;s%LOGDIR%$LOGDIR%g" "$DIR/auth_serv/as.conf" > "$LOGDIR/as.conf"
sed "s/group=admin/group=$GROUP/;s%LOGDIR%$LOGDIR%g" "$DIR/auth_serv/as2.conf" > "$LOGDIR/as2.conf"
unset VM
if [ "$1" = "VM" ]; then
VM="y"
shift
fi
if [ "$1" = "valgrind" ]; then
VALGRIND=y
VALGRIND_WPAS="valgrind --log-file=$LOGDIR/valgrind-wlan%d"
VALGRIND_HAPD="valgrind --log-file=$LOGDIR/valgrind-hostapd"
chmod -f a+rx $WPAS
chmod -f a+rx $HAPD
chmod -f a+rx $HAPD_AS
HAPD_AS="valgrind --log-file=$LOGDIR/valgrind-auth-serv $HAPD_AS"
shift
else
unset VALGRIND
VALGRIND_WPAS=
VALGRIND_HAPD=
fi
if [ "$1" = "trace" ]; then
TRACE="T"
shift
else
TRACE=""
fi
$DIR/stop.sh
TMP=$1
if [ x${TMP%=[0-9]*} = "xchannels" ]; then
NUM_CH=${TMP#channels=}
shift
else
NUM_CH=1
fi
test -f /proc/modules && sudo modprobe mac80211_hwsim radios=7 channels=$NUM_CH support_p2p_device=0 dyndbg=+p
sudo ifconfig hwsim0 up
sudo $WLANTEST -i hwsim0 -n $LOGDIR/hwsim0.pcapng -c -dtN -L $LOGDIR/hwsim0 &
for i in 0 1 2; do
DBUSARG=""
if [ $i = "0" ] && ([ -r /var/run/dbus/pid ] || [ -r /var/run/dbus/system_bus_socket ]); then
if $WPAS | grep -q -- -u; then
DBUSARG="-u"
fi
fi
sudo $(printf -- "$VALGRIND_WPAS" $i) $WPAS -g /tmp/wpas-wlan$i -G$GROUP -Dnl80211 -iwlan$i -c $LOGDIR/p2p$i.conf \
-ddKt$TRACE -f $LOGDIR/log$i $DBUSARG &
done
sudo $(printf -- "$VALGRIND_WPAS" 5) $WPAS -g /tmp/wpas-wlan5 -G$GROUP \
-ddKt$TRACE -f $LOGDIR/log5 &
sudo $VALGRIND_HAPD $HAPD -ddKt$TRACE -g /var/run/hostapd-global -G $GROUP -f $LOGDIR/hostapd &
HPID=$!
if [ -z "$VM" ]; then
# Sleep a bit, otherwise pgrep may run before the child is forked
sleep 0.1
pgrep -P $HPID > $LOGDIR/hostapd-test.pid
else
echo $HPID > $LOGDIR/hostapd-test.pid
fi
if [ -x $HLR_AUC_GW ]; then
cp $DIR/auth_serv/hlr_auc_gw.milenage_db $LOGDIR/hlr_auc_gw.milenage_db
sudo $HLR_AUC_GW -u -m $LOGDIR/hlr_auc_gw.milenage_db -g $DIR/auth_serv/hlr_auc_gw.gsm > $LOGDIR/hlr_auc_gw &
fi
openssl ocsp -index $DIR/auth_serv/index.txt \
-rsigner $DIR/auth_serv/ocsp-responder.pem \
-rkey $DIR/auth_serv/ocsp-responder.key \
-CA $DIR/auth_serv/ca.pem \
-issuer $DIR/auth_serv/ca.pem \
-verify_other $DIR/auth_serv/ca.pem -trust_other \
-ndays 7 \
-reqin $DIR/auth_serv/ocsp-req.der \
-respout $LOGDIR/ocsp-server-cache.der > $LOGDIR/ocsp.log 2>&1
if [ ! -r $LOGDIR/ocsp-server-cache.der ]; then
cp $DIR/auth_serv/ocsp-server-cache.der $LOGDIR/ocsp-server-cache.der
fi
cp $DIR/auth_serv/ocsp-multi-server-cache.der $LOGDIR/ocsp-multi-server-cache.der
openssl ocsp -index $DIR/auth_serv/index.txt \
-rsigner $DIR/auth_serv/ocsp-responder.pem \
-rkey $DIR/auth_serv/ocsp-responder.key \
-resp_key_id \
-CA $DIR/auth_serv/ca.pem \
-issuer $DIR/auth_serv/ca.pem \
-verify_other $DIR/auth_serv/ca.pem -trust_other \
-ndays 7 \
-reqin $DIR/auth_serv/ocsp-req.der \
-respout $LOGDIR/ocsp-server-cache-key-id.der > $LOGDIR/ocsp.log 2>&1
for i in unknown revoked; do
openssl ocsp -index $DIR/auth_serv/index-$i.txt \
-rsigner $DIR/auth_serv/ocsp-responder.pem \
-rkey $DIR/auth_serv/ocsp-responder.key \
-CA $DIR/auth_serv/ca.pem \
-issuer $DIR/auth_serv/ca.pem \
-verify_other $DIR/auth_serv/ca.pem -trust_other \
-ndays 7 \
-reqin $DIR/auth_serv/ocsp-req.der \
-respout $LOGDIR/ocsp-server-cache-$i.der >> $LOGDIR/ocsp.log 2>&1
done
openssl ocsp -reqout $LOGDIR/ocsp-req.der -issuer $DIR/auth_serv/ca.pem \
-sha256 -serial 0xD8D3E3A6CBE3CD17 -no_nonce >> $LOGDIR/ocsp.log 2>&1
for i in "" "-unknown" "-revoked"; do
openssl ocsp -index $DIR/auth_serv/index$i.txt \
-rsigner $DIR/auth_serv/ca.pem \
-rkey $DIR/auth_serv/ca-key.pem \
-CA $DIR/auth_serv/ca.pem \
-ndays 7 \
-reqin $LOGDIR/ocsp-req.der \
-resp_no_certs \
-respout $LOGDIR/ocsp-resp-ca-signed$i.der >> $LOGDIR/ocsp.log 2>&1
done
openssl ocsp -index $DIR/auth_serv/index.txt \
-rsigner $DIR/auth_serv/server.pem \
-rkey $DIR/auth_serv/server.key \
-CA $DIR/auth_serv/ca.pem \
-ndays 7 \
-reqin $LOGDIR/ocsp-req.der \
-respout $LOGDIR/ocsp-resp-server-signed.der >> $LOGDIR/ocsp.log 2>&1
touch $LOGDIR/hostapd.db
sudo $HAPD_AS -ddKt $LOGDIR/as.conf $LOGDIR/as2.conf > $LOGDIR/auth_serv &
# wait for programs to be fully initialized
for i in 0 1 2 3 4 5 6 7 8 9; do
if [ -e /tmp/wpas-wlan0 ]; then
break
fi
sleep 0.05
done
for i in 0 1 2; do
for j in `seq 1 10`; do
if $WPACLI -g /tmp/wpas-wlan$i ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to /tmp/wpas-wlan$i"
exit 1
fi
sleep 1
done
done
for j in `seq 1 10`; do
if $WPACLI -g /var/run/hostapd-global ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to /var/run/hostapd-global"
exit 1
fi
sleep 1
done
for j in `seq 1 10`; do
if $HAPDCLI -i as ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to hostapd-as-RADIUS-server"
exit 1
fi
sleep 1
done
if [ $USER = "0" -o $USER = "root" ]; then
exit 0
fi
sleep 0.75
sudo chown -f $USER $LOGDIR/hwsim0.pcapng $LOGDIR/hwsim0 $LOGDIR/log* $LOGDIR/hostapd
if [ "x$VALGRIND" = "xy" ]; then
sudo chown -f $USER $LOGDIR/*valgrind*
fi
exit 0