1253 lines
51 KiB
Python
1253 lines
51 KiB
Python
# WPA2-Enterprise PMKSA caching tests
|
|
# Copyright (c) 2013-2014, Jouni Malinen <j@w1.fi>
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
import binascii
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import socket
|
|
import struct
|
|
import subprocess
|
|
import time
|
|
|
|
import hostapd
|
|
import hwsim_utils
|
|
from wpasupplicant import WpaSupplicant
|
|
from utils import alloc_fail, HwsimSkip, wait_fail_trigger
|
|
from test_ap_eap import eap_connect
|
|
|
|
def test_pmksa_cache_on_roam_back(dev, apdev):
|
|
"""PMKSA cache to skip EAP on reassociation back to same AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
if pmksa['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
# It can take some time for the second AP to become ready to reply to Probe
|
|
# Request frames especially under heavy CPU load, so allow couple of rounds
|
|
# of scanning to avoid reporting errors incorrectly just because of scans
|
|
# not having seen the target AP.
|
|
for i in range(0, 10):
|
|
dev[0].scan(freq="2412")
|
|
if dev[0].get_bss(bssid2) is not None:
|
|
break
|
|
logger.info("Scan again to find target AP")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
dev[0].wait_connected(timeout=10, error="Roaming timed out")
|
|
pmksa2 = dev[0].get_pmksa(bssid2)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa2['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa1b = dev[0].get_pmksa(bssid)
|
|
if pmksa1b is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa['pmkid'] != pmksa1b['pmkid']:
|
|
raise Exception("Unexpected PMKID change for AP1")
|
|
|
|
dev[0].dump_monitor()
|
|
if "FAIL" in dev[0].request("PMKSA_FLUSH"):
|
|
raise Exception("PMKSA_FLUSH failed")
|
|
if dev[0].get_pmksa(bssid) is not None or dev[0].get_pmksa(bssid2) is not None:
|
|
raise Exception("PMKSA_FLUSH did not remove PMKSA entries")
|
|
dev[0].wait_disconnected(timeout=5)
|
|
dev[0].wait_connected(timeout=15, error="Reconnection timed out")
|
|
|
|
def test_pmksa_cache_and_reauth(dev, apdev):
|
|
"""PMKSA caching and EAPOL reauthentication"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
# It can take some time for the second AP to become ready to reply to Probe
|
|
# Request frames especially under heavy CPU load, so allow couple of rounds
|
|
# of scanning to avoid reporting errors incorrectly just because of scans
|
|
# not having seen the target AP.
|
|
for i in range(0, 10):
|
|
dev[0].scan(freq="2412")
|
|
if dev[0].get_bss(bssid2) is not None:
|
|
break
|
|
logger.info("Scan again to find target AP")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
dev[0].wait_connected(timeout=10, error="Roaming timed out")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
|
|
# Verify EAPOL reauthentication after PMKSA caching
|
|
hapd.request("EAPOL_REAUTH " + dev[0].own_addr())
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not succeed")
|
|
|
|
def test_pmksa_cache_and_ptk_rekey_ap(dev, apdev):
|
|
"""PMKSA caching and PTK rekey triggered by AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
# It can take some time for the second AP to become ready to reply to Probe
|
|
# Request frames especially under heavy CPU load, so allow couple of rounds
|
|
# of scanning to avoid reporting errors incorrectly just because of scans
|
|
# not having seen the target AP.
|
|
for i in range(0, 10):
|
|
dev[0].scan(freq="2412")
|
|
if dev[0].get_bss(bssid2) is not None:
|
|
break
|
|
logger.info("Scan again to find target AP")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
dev[0].wait_connected(timeout=10, error="Roaming timed out")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
|
|
# Verify PTK rekeying after PMKSA caching
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=3)
|
|
if ev is None:
|
|
raise Exception("PTK rekey timed out")
|
|
|
|
def test_pmksa_cache_opportunistic_only_on_sta(dev, apdev):
|
|
"""Opportunistic PMKSA caching enabled only on station"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef", okc=True,
|
|
scan_freq="2412")
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
if pmksa['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
dev[0].wait_connected(timeout=10, error="Roaming timed out")
|
|
pmksa2 = dev[0].get_pmksa(bssid2)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa2['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa1b = dev[0].get_pmksa(bssid)
|
|
if pmksa1b is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa['pmkid'] != pmksa1b['pmkid']:
|
|
raise Exception("Unexpected PMKID change for AP1")
|
|
|
|
def test_pmksa_cache_opportunistic(dev, apdev):
|
|
"""Opportunistic PMKSA caching"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['okc'] = "1"
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef", okc=True,
|
|
scan_freq="2412")
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
if pmksa['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa2 = dev[0].get_pmksa(bssid2)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
|
|
pmksa1b = dev[0].get_pmksa(bssid)
|
|
if pmksa1b is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa['pmkid'] != pmksa1b['pmkid']:
|
|
raise Exception("Unexpected PMKID change for AP1")
|
|
|
|
def test_pmksa_cache_opportunistic_connect(dev, apdev):
|
|
"""Opportunistic PMKSA caching with connect API"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['okc'] = "1"
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
|
|
wpas.connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef", okc=True,
|
|
scan_freq="2412")
|
|
pmksa = wpas.get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
if pmksa['opportunistic'] != '0':
|
|
raise Exception("Unexpected opportunistic PMKSA cache entry")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
wpas.dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
wpas.scan_for_bss(bssid2, freq="2412", force_scan=True)
|
|
wpas.request("ROAM " + bssid2)
|
|
ev = wpas.wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa2 = wpas.get_pmksa(bssid2)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
|
|
wpas.dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
wpas.scan(freq="2412")
|
|
wpas.request("ROAM " + bssid)
|
|
ev = wpas.wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
|
|
pmksa1b = wpas.get_pmksa(bssid)
|
|
if pmksa1b is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa['pmkid'] != pmksa1b['pmkid']:
|
|
raise Exception("Unexpected PMKID change for AP1")
|
|
|
|
def test_pmksa_cache_expiration(dev, apdev):
|
|
"""PMKSA cache entry expiration"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].request("SET dot11RSNAConfigPMKLifetime 10")
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
hapd.wait_sta()
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
logger.info("Wait for PMKSA cache entry to expire")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed",
|
|
"CTRL-EVENT-DISCONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No EAP reauthentication seen")
|
|
if "CTRL-EVENT-DISCONNECTED" in ev:
|
|
raise Exception("Unexpected disconnection")
|
|
pmksa2 = dev[0].get_pmksa(bssid)
|
|
if pmksa['pmkid'] == pmksa2['pmkid']:
|
|
raise Exception("PMKID did not change")
|
|
hapd.wait_ptkinitdone(dev[0].own_addr())
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_pmksa_cache_expiration_disconnect(dev, apdev):
|
|
"""PMKSA cache entry expiration (disconnect)"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].request("SET dot11RSNAConfigPMKLifetime 2")
|
|
dev[0].request("SET dot11RSNAConfigPMKReauthThreshold 100")
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
hapd.request("SET auth_server_shared_secret incorrect")
|
|
logger.info("Wait for PMKSA cache entry to expire")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed",
|
|
"CTRL-EVENT-DISCONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No EAP reauthentication seen")
|
|
if "CTRL-EVENT-DISCONNECTED" not in ev:
|
|
raise Exception("Missing disconnection")
|
|
hapd.request("SET auth_server_shared_secret radius")
|
|
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No EAP reauthentication seen")
|
|
pmksa2 = dev[0].get_pmksa(bssid)
|
|
if pmksa['pmkid'] == pmksa2['pmkid']:
|
|
raise Exception("PMKID did not change")
|
|
|
|
def test_pmksa_cache_and_cui(dev, apdev):
|
|
"""PMKSA cache and Chargeable-User-Identity"""
|
|
params = hostapd.wpa2_eap_params(ssid="cui")
|
|
params['radius_request_cui'] = '1'
|
|
params['acct_server_addr'] = "127.0.0.1"
|
|
params['acct_server_port'] = "1813"
|
|
params['acct_server_shared_secret'] = "radius"
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("cui", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk-cui",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
pmksa = dev[0].get_pmksa(bssid)
|
|
if pmksa is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No connection event received from hostapd")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Disconnect and reconnect to the same AP")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
dev[0].request("RECONNECT")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Reconnect timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa1b = dev[0].get_pmksa(bssid)
|
|
if pmksa1b is None:
|
|
raise Exception("No PMKSA cache entry found")
|
|
if pmksa['pmkid'] != pmksa1b['pmkid']:
|
|
raise Exception("Unexpected PMKID change for AP1")
|
|
|
|
dev[0].request("REAUTHENTICATE")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
for i in range(0, 20):
|
|
state = dev[0].get_status_field("wpa_state")
|
|
if state == "COMPLETED":
|
|
break
|
|
time.sleep(0.1)
|
|
if state != "COMPLETED":
|
|
raise Exception("Reauthentication did not complete")
|
|
|
|
def test_pmksa_cache_preauth_auto(dev, apdev):
|
|
"""RSN pre-authentication based on pre-connection scan results"""
|
|
try:
|
|
run_pmksa_cache_preauth_auto(dev, apdev)
|
|
finally:
|
|
hostapd.cmd_execute(apdev[0], ['ip', 'link', 'set', 'dev',
|
|
'ap-br0', 'down', '2>', '/dev/null'],
|
|
shell=True)
|
|
hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', 'ap-br0',
|
|
'2>', '/dev/null'], shell=True)
|
|
|
|
def run_pmksa_cache_preauth_auto(dev, apdev):
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['bridge'] = 'ap-br0'
|
|
params['rsn_preauth'] = '1'
|
|
params['rsn_preauth_interfaces'] = 'ap-br0'
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.cmd_execute(['brctl', 'setfd', 'ap-br0', '0'])
|
|
hapd.cmd_execute(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
|
|
eap_connect(dev[0], None, "PAX", "pax.user@example.com",
|
|
password_hex="0123456789abcdef0123456789abcdef")
|
|
|
|
found = False
|
|
for i in range(20):
|
|
time.sleep(0.5)
|
|
res1 = dev[0].get_pmksa(apdev[0]['bssid'])
|
|
res2 = dev[0].get_pmksa(apdev[1]['bssid'])
|
|
if res1 and res2:
|
|
found = True
|
|
break
|
|
if not found:
|
|
raise Exception("The expected PMKSA cache entries not found")
|
|
|
|
def generic_pmksa_cache_preauth(dev, apdev, extraparams, identity, databridge,
|
|
force_disconnect=False):
|
|
if not extraparams:
|
|
extraparams = [{}, {}]
|
|
try:
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['bridge'] = 'ap-br0'
|
|
for key, value in extraparams[0].items():
|
|
params[key] = value
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.cmd_execute(['brctl', 'setfd', 'ap-br0', '0'])
|
|
hapd.cmd_execute(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
|
|
eap_connect(dev[0], hapd, "PAX", identity,
|
|
password_hex="0123456789abcdef0123456789abcdef")
|
|
|
|
# Verify connectivity in the correct VLAN
|
|
hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge)
|
|
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['bridge'] = 'ap-br0'
|
|
params['rsn_preauth'] = '1'
|
|
params['rsn_preauth_interfaces'] = databridge
|
|
for key, value in extraparams[1].items():
|
|
params[key] = value
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = apdev[1]['bssid']
|
|
dev[0].scan(freq="2412")
|
|
success = False
|
|
status_seen = False
|
|
for i in range(0, 50):
|
|
if not status_seen:
|
|
status = dev[0].request("STATUS")
|
|
if "Pre-authentication EAPOL state machines:" in status:
|
|
status_seen = True
|
|
time.sleep(0.1)
|
|
pmksa = dev[0].get_pmksa(bssid1)
|
|
if pmksa:
|
|
success = True
|
|
break
|
|
if not success:
|
|
raise Exception("No PMKSA cache entry created from pre-authentication")
|
|
if not status_seen:
|
|
raise Exception("Pre-authentication EAPOL status was not available")
|
|
|
|
dev[0].scan(freq="2412")
|
|
if "[WPA2-EAP-CCMP-preauth]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
dev[0].request("ROAM " + bssid1)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa2 = dev[0].get_pmksa(bssid1)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry")
|
|
if pmksa['pmkid'] != pmksa2['pmkid']:
|
|
raise Exception("Unexpected PMKID change")
|
|
|
|
hapd1.wait_sta()
|
|
# Verify connectivity in the correct VLAN
|
|
hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge)
|
|
|
|
if not force_disconnect:
|
|
return
|
|
|
|
# Disconnect the STA from both APs to avoid forceful ifdown by the
|
|
# test script on a VLAN that this has an associated STA. That used to
|
|
# trigger a mac80211 warning.
|
|
dev[0].request("DISCONNECT")
|
|
hapd.request("DISABLE")
|
|
|
|
finally:
|
|
hostapd.cmd_execute(apdev[0], ['ip', 'link', 'set', 'dev',
|
|
'ap-br0', 'down', '2>', '/dev/null'],
|
|
shell=True)
|
|
hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', 'ap-br0',
|
|
'2>', '/dev/null'], shell=True)
|
|
|
|
def test_pmksa_cache_preauth(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry"""
|
|
generic_pmksa_cache_preauth(dev, apdev, None,
|
|
"pax.user@example.com", "ap-br0")
|
|
|
|
def test_pmksa_cache_preauth_per_sta_vif(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry with per_sta_vif"""
|
|
extraparams = [{}, {}]
|
|
extraparams[0]['per_sta_vif'] = "1"
|
|
extraparams[1]['per_sta_vif'] = "1"
|
|
generic_pmksa_cache_preauth(dev, apdev, extraparams,
|
|
"pax.user@example.com", "ap-br0")
|
|
|
|
def test_pmksa_cache_preauth_vlan_enabled(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set)"""
|
|
extraparams = [{}, {}]
|
|
extraparams[0]['dynamic_vlan'] = '1'
|
|
extraparams[1]['dynamic_vlan'] = '1'
|
|
generic_pmksa_cache_preauth(dev, apdev, extraparams,
|
|
"pax.user@example.com", "ap-br0")
|
|
|
|
def test_pmksa_cache_preauth_vlan_enabled_per_sta_vif(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set, with per_sta_vif enabled)"""
|
|
extraparams = [{}, {}]
|
|
extraparams[0]['per_sta_vif'] = "1"
|
|
extraparams[1]['per_sta_vif'] = "1"
|
|
extraparams[0]['dynamic_vlan'] = '1'
|
|
extraparams[1]['dynamic_vlan'] = '1'
|
|
generic_pmksa_cache_preauth(dev, apdev, extraparams,
|
|
"pax.user@example.com", "ap-br0")
|
|
|
|
def test_pmksa_cache_preauth_vlan_used(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry (station with VLAN set)"""
|
|
run_pmksa_cache_preauth_vlan_used(dev, apdev, None, force_disconnect=True)
|
|
|
|
def run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams=None,
|
|
force_disconnect=False):
|
|
try:
|
|
subprocess.call(['brctl', 'addbr', 'brvlan1'])
|
|
subprocess.call(['brctl', 'setfd', 'brvlan1', '0'])
|
|
if not extraparams:
|
|
extraparams = [{}, {}]
|
|
extraparams[0]['dynamic_vlan'] = '1'
|
|
extraparams[0]['vlan_file'] = 'hostapd.wlan3.vlan'
|
|
extraparams[1]['dynamic_vlan'] = '1'
|
|
extraparams[1]['vlan_file'] = 'hostapd.wlan4.vlan'
|
|
generic_pmksa_cache_preauth(dev, apdev, extraparams,
|
|
"vlan1", "brvlan1",
|
|
force_disconnect=force_disconnect)
|
|
finally:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'brvlan1', 'down'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'wlan3.1', 'down'],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['ip', 'link', 'set', 'dev', 'wlan4.1', 'down'],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['brctl', 'delif', 'brvlan1', 'wlan3.1'],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['brctl', 'delif', 'brvlan1', 'wlan4.1'],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['brctl', 'delbr', 'brvlan1'])
|
|
|
|
def test_pmksa_cache_preauth_vlan_used_per_sta_vif(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry (station with VLAN set, per_sta_vif=1)"""
|
|
extraparams = [{}, {}]
|
|
extraparams[0]['per_sta_vif'] = "1"
|
|
extraparams[1]['per_sta_vif'] = "1"
|
|
run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams)
|
|
|
|
def test_pmksa_cache_disabled(dev, apdev):
|
|
"""PMKSA cache disabling on AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['disable_pmksa_caching'] = '1'
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam to AP2")
|
|
dev[0].scan_for_bss(bssid2, freq="2412")
|
|
dev[0].request("ROAM " + bssid2)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
dev[0].wait_connected(timeout=10, error="Roaming timed out")
|
|
|
|
dev[0].dump_monitor()
|
|
logger.info("Roam back to AP1")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].request("ROAM " + bssid)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=20)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("EAP exchange missing")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=20)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
|
|
def test_pmksa_cache_ap_expiration(dev, apdev):
|
|
"""PMKSA cache entry expiring on AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
dev[0].cmd_execute(['iw', 'dev', dev[0].ifname,
|
|
'set', 'power_save', 'off'])
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk-user-session-timeout",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No connection event received from hostapd")
|
|
hapd.dump_monitor()
|
|
|
|
dev[0].request("DISCONNECT")
|
|
ev = hapd.wait_event(["AP-STA-DISCONNECTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No disconnection event received from hostapd")
|
|
dev[0].wait_disconnected()
|
|
|
|
# Wait for session timeout to remove PMKSA cache entry
|
|
time.sleep(5)
|
|
dev[0].dump_monitor()
|
|
hapd.dump_monitor()
|
|
|
|
dev[0].request("RECONNECT")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=20)
|
|
if ev is None:
|
|
raise Exception("Reconnection with the AP timed out")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("EAP exchange missing")
|
|
dev[0].wait_connected(timeout=20, error="Reconnect timed out")
|
|
dev[0].dump_monitor()
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No connection event received from hostapd [2]")
|
|
hapd.dump_monitor()
|
|
|
|
# Wait for session timeout
|
|
ev = hapd.wait_event(["AP-STA-DISCONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No disconnection event received from hostapd [2]")
|
|
dev[0].wait_disconnected(timeout=20)
|
|
dev[0].wait_connected(timeout=20, error="Reassociation timed out")
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No connection event received from hostapd [3]")
|
|
hapd.dump_monitor()
|
|
dev[0].dump_monitor()
|
|
|
|
def test_pmksa_cache_multiple_sta(dev, apdev):
|
|
"""PMKSA cache with multiple stations"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
for d in dev:
|
|
d.flush_scan_cache()
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk-user-session-timeout",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
dev[1].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
dev[2].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk-user-session-timeout",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
wpas.flush_scan_cache()
|
|
wpas.connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
logger.info("Roam to AP2")
|
|
for sta in [dev[1], dev[0], dev[2], wpas]:
|
|
sta.dump_monitor()
|
|
sta.scan_for_bss(bssid2, freq="2412")
|
|
if "OK" not in sta.request("ROAM " + bssid2):
|
|
raise Exception("ROAM command failed (" + sta.ifname + ")")
|
|
ev = sta.wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("EAP success timed out")
|
|
sta.wait_connected(timeout=10, error="Roaming timed out")
|
|
sta.dump_monitor()
|
|
|
|
logger.info("Roam back to AP1")
|
|
for sta in [dev[1], wpas, dev[0], dev[2]]:
|
|
sta.dump_monitor()
|
|
sta.scan(freq="2412")
|
|
sta.dump_monitor()
|
|
sta.request("ROAM " + bssid)
|
|
sta.wait_connected(timeout=10, error="Roaming timed out")
|
|
sta.dump_monitor()
|
|
|
|
time.sleep(4)
|
|
|
|
logger.info("Roam back to AP2")
|
|
for sta in [dev[1], wpas, dev[0], dev[2]]:
|
|
sta.dump_monitor()
|
|
sta.scan(freq="2412")
|
|
sta.dump_monitor()
|
|
sta.request("ROAM " + bssid2)
|
|
sta.wait_connected(timeout=10, error="Roaming timed out")
|
|
sta.dump_monitor()
|
|
|
|
def test_pmksa_cache_opportunistic_multiple_sta(dev, apdev):
|
|
"""Opportunistic PMKSA caching with multiple stations"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['okc'] = "1"
|
|
hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
for d in dev:
|
|
d.flush_scan_cache()
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
wpas.flush_scan_cache()
|
|
for sta in [dev[0], dev[1], dev[2], wpas]:
|
|
sta.connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef", okc=True,
|
|
scan_freq="2412")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
logger.info("Roam to AP2")
|
|
for sta in [dev[2], dev[0], wpas, dev[1]]:
|
|
sta.dump_monitor()
|
|
sta.scan_for_bss(bssid2, freq="2412")
|
|
if "OK" not in sta.request("ROAM " + bssid2):
|
|
raise Exception("ROAM command failed")
|
|
ev = sta.wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
pmksa2 = sta.get_pmksa(bssid2)
|
|
if pmksa2 is None:
|
|
raise Exception("No PMKSA cache entry created")
|
|
sta.dump_monitor()
|
|
|
|
logger.info("Roam back to AP1")
|
|
for sta in [dev[0], dev[1], dev[2], wpas]:
|
|
sta.dump_monitor()
|
|
sta.scan_for_bss(bssid, freq="2412")
|
|
sta.request("ROAM " + bssid)
|
|
ev = sta.wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Roaming with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange")
|
|
|
|
def test_pmksa_cache_preauth_oom(dev, apdev):
|
|
"""RSN pre-authentication to generate PMKSA cache entry and OOM"""
|
|
try:
|
|
_test_pmksa_cache_preauth_oom(dev, apdev)
|
|
finally:
|
|
hostapd.cmd_execute(apdev[0], ['ip', 'link', 'set', 'dev', 'ap-br0',
|
|
'down'])
|
|
hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', 'ap-br0'])
|
|
|
|
def _test_pmksa_cache_preauth_oom(dev, apdev):
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['bridge'] = 'ap-br0'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hostapd.cmd_execute(apdev[0], ['brctl', 'setfd', 'ap-br0', '0'])
|
|
hostapd.cmd_execute(apdev[0], ['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
|
|
eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
|
|
password_hex="0123456789abcdef0123456789abcdef",
|
|
bssid=apdev[0]['bssid'])
|
|
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['bridge'] = 'ap-br0'
|
|
params['rsn_preauth'] = '1'
|
|
params['rsn_preauth_interfaces'] = 'ap-br0'
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = apdev[1]['bssid']
|
|
|
|
tests = [(1, "rsn_preauth_receive"),
|
|
(2, "rsn_preauth_receive"),
|
|
(1, "rsn_preauth_send"),
|
|
(1, "wpa_auth_pmksa_add_preauth;rsn_preauth_finished")]
|
|
for test in tests:
|
|
hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff")
|
|
with alloc_fail(hapd, test[0], test[1]):
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
if "OK" not in dev[0].request("PREAUTH " + bssid1):
|
|
raise Exception("PREAUTH failed")
|
|
|
|
success = False
|
|
count = 0
|
|
for i in range(50):
|
|
time.sleep(0.1)
|
|
pmksa = dev[0].get_pmksa(bssid1)
|
|
if pmksa:
|
|
success = True
|
|
break
|
|
state = hapd.request('GET_ALLOC_FAIL')
|
|
if state.startswith('0:'):
|
|
count += 1
|
|
if count > 2:
|
|
break
|
|
logger.info("PMKSA cache success: " + str(success))
|
|
|
|
dev[0].request("PMKSA_FLUSH")
|
|
dev[0].wait_disconnected()
|
|
dev[0].wait_connected()
|
|
dev[0].dump_monitor()
|
|
|
|
def test_pmksa_cache_size_limit(dev, apdev):
|
|
"""PMKSA cache size limit in wpa_supplicant"""
|
|
try:
|
|
_test_pmksa_cache_size_limit(dev, apdev)
|
|
finally:
|
|
try:
|
|
hapd = hostapd.HostapdGlobal(apdev[0])
|
|
hapd.flush()
|
|
hapd.remove(apdev[0]['ifname'])
|
|
except:
|
|
pass
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
bssid = apdev[0]['bssid']
|
|
params['bssid'] = bssid
|
|
hostapd.add_ap(apdev[0], params)
|
|
|
|
def _test_pmksa_cache_size_limit(dev, apdev):
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412", only_add_network=True)
|
|
for i in range(33):
|
|
bssid = apdev[0]['bssid'][0:15] + "%02x" % i
|
|
logger.info("Iteration with BSSID " + bssid)
|
|
params['bssid'] = bssid
|
|
hostapd.add_ap(apdev[0], params)
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, freq=2412, only_new=True)
|
|
dev[0].select_network(id)
|
|
dev[0].wait_connected()
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
entries = len(dev[0].request("PMKSA").splitlines()) - 1
|
|
if i == 32:
|
|
if entries != 32:
|
|
raise Exception("Unexpected number of PMKSA entries after expected removal of the oldest entry")
|
|
elif i + 1 != entries:
|
|
raise Exception("Unexpected number of PMKSA entries")
|
|
|
|
hapd = hostapd.HostapdGlobal(apdev[0])
|
|
hapd.flush()
|
|
hapd.remove(apdev[0]['ifname'])
|
|
|
|
def test_pmksa_cache_preauth_timeout(dev, apdev):
|
|
"""RSN pre-authentication timing out"""
|
|
try:
|
|
_test_pmksa_cache_preauth_timeout(dev, apdev)
|
|
finally:
|
|
dev[0].request("SET dot11RSNAConfigSATimeout 60")
|
|
|
|
def _test_pmksa_cache_preauth_timeout(dev, apdev):
|
|
dev[0].request("SET dot11RSNAConfigSATimeout 1")
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
|
|
password_hex="0123456789abcdef0123456789abcdef",
|
|
bssid=apdev[0]['bssid'])
|
|
if "OK" not in dev[0].request("PREAUTH f2:11:22:33:44:55"):
|
|
raise Exception("PREAUTH failed")
|
|
ev = dev[0].wait_event(["RSN: pre-authentication with"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No timeout event seen")
|
|
if "timed out" not in ev:
|
|
raise Exception("Unexpected event: " + ev)
|
|
|
|
def test_pmksa_cache_preauth_wpas_oom(dev, apdev):
|
|
"""RSN pre-authentication OOM in wpa_supplicant"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
|
|
password_hex="0123456789abcdef0123456789abcdef",
|
|
bssid=apdev[0]['bssid'])
|
|
for i in range(1, 11):
|
|
with alloc_fail(dev[0], i, "rsn_preauth_init"):
|
|
res = dev[0].request("PREAUTH f2:11:22:33:44:55").strip()
|
|
logger.info("Iteration %d - PREAUTH command results: %s" % (i, res))
|
|
for j in range(10):
|
|
state = dev[0].request('GET_ALLOC_FAIL')
|
|
if state.startswith('0:'):
|
|
break
|
|
time.sleep(0.05)
|
|
|
|
def test_pmksa_cache_ctrl(dev, apdev):
|
|
"""PMKSA cache control interface operations"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
addr = dev[0].own_addr()
|
|
|
|
dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
pmksa_sta = dev[0].get_pmksa(bssid)
|
|
if pmksa_sta is None:
|
|
raise Exception("No PMKSA cache entry created on STA")
|
|
pmksa_ap = hapd.get_pmksa(addr)
|
|
if pmksa_ap is None:
|
|
raise Exception("No PMKSA cache entry created on AP")
|
|
if pmksa_sta['pmkid'] != pmksa_ap['pmkid']:
|
|
raise Exception("PMKID mismatch in PMKSA cache entries")
|
|
|
|
if "OK" not in hapd.request("PMKSA_FLUSH"):
|
|
raise Exception("PMKSA_FLUSH failed")
|
|
pmksa_ap = hapd.get_pmksa(addr)
|
|
if pmksa_ap is not None:
|
|
raise Exception("PMKSA cache entry was not removed on AP")
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
dev[0].request("RECONNECT")
|
|
dev[0].wait_connected()
|
|
|
|
pmksa_sta2 = dev[0].get_pmksa(bssid)
|
|
if pmksa_sta2 is None:
|
|
raise Exception("No PMKSA cache entry created on STA after reconnect")
|
|
pmksa_ap2 = hapd.get_pmksa(addr)
|
|
if pmksa_ap2 is None:
|
|
raise Exception("No PMKSA cache entry created on AP after reconnect")
|
|
if pmksa_sta2['pmkid'] != pmksa_ap2['pmkid']:
|
|
raise Exception("PMKID mismatch in PMKSA cache entries after reconnect")
|
|
if pmksa_sta2['pmkid'] == pmksa_sta['pmkid']:
|
|
raise Exception("PMKID did not change after reconnect")
|
|
|
|
def test_pmksa_cache_ctrl_events(dev, apdev):
|
|
"""PMKSA cache control interface events"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412", wait_connect=False)
|
|
|
|
ev = dev[0].wait_event(["PMKSA-CACHE-ADDED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No PMKSA-CACHE-ADDED event")
|
|
dev[0].wait_connected()
|
|
items = ev.split(' ')
|
|
if items[1] != bssid:
|
|
raise Exception("BSSID mismatch: " + ev)
|
|
if int(items[2]) != id:
|
|
raise Exception("network_id mismatch: " + ev)
|
|
|
|
dev[0].request("PMKSA_FLUSH")
|
|
ev = dev[0].wait_event(["PMKSA-CACHE-REMOVED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No PMKSA-CACHE-REMOVED event")
|
|
dev[0].wait_disconnected()
|
|
dev[0].request("DISCONNECT")
|
|
items = ev.split(' ')
|
|
if items[1] != bssid:
|
|
raise Exception("BSSID mismatch: " + ev)
|
|
if int(items[2]) != id:
|
|
raise Exception("network_id mismatch: " + ev)
|
|
|
|
def test_pmksa_cache_ctrl_ext(dev, apdev):
|
|
"""PMKSA cache control interface for external management"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
res1 = dev[0].request("PMKSA_GET %d" % id)
|
|
logger.info("PMKSA_GET: " + res1)
|
|
if "UNKNOWN COMMAND" in res1:
|
|
raise HwsimSkip("PMKSA_GET not supported in the build")
|
|
if bssid not in res1:
|
|
raise Exception("PMKSA cache entry missing")
|
|
|
|
hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
dev[0].scan_for_bss(bssid2, freq=2412, force_scan=True)
|
|
dev[0].request("ROAM " + bssid2)
|
|
dev[0].wait_connected()
|
|
|
|
res2 = dev[0].request("PMKSA_GET %d" % id)
|
|
logger.info("PMKSA_GET: " + res2)
|
|
if bssid not in res2:
|
|
raise Exception("PMKSA cache entry 1 missing")
|
|
if bssid2 not in res2:
|
|
raise Exception("PMKSA cache entry 2 missing")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].request("PMKSA_FLUSH")
|
|
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="WPA-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412", only_add_network=True)
|
|
res3 = dev[0].request("PMKSA_GET %d" % id)
|
|
if res3 != '':
|
|
raise Exception("Unexpected PMKSA cache entry remains: " + res3)
|
|
res4 = dev[0].request("PMKSA_GET %d" % (id + 1234))
|
|
if not res4.startswith('FAIL'):
|
|
raise Exception("Unexpected PMKSA cache entry for unknown network: " + res4)
|
|
|
|
for entry in res2.splitlines():
|
|
if "OK" not in dev[0].request("PMKSA_ADD %d %s" % (id, entry)):
|
|
raise Exception("Failed to add PMKSA entry")
|
|
|
|
dev[0].select_network(id)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Connection with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange after external PMKSA cache restore")
|
|
|
|
def test_pmksa_cache_ctrl_ext_ft(dev, apdev):
|
|
"""PMKSA cache control interface for external management (FT)"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params['nas_identifier'] = "nas.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params["mobility_domain"] = "a1b2"
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="FT-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
res1 = dev[0].request("PMKSA_GET %d" % id)
|
|
logger.info("PMKSA_GET: " + res1)
|
|
if "UNKNOWN COMMAND" in res1:
|
|
raise HwsimSkip("PMKSA_GET not supported in the build")
|
|
if bssid not in res1:
|
|
raise Exception("PMKSA cache entry missing")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("PMKSA_FLUSH")
|
|
|
|
id = dev[0].connect("test-pmksa-cache", proto="RSN", key_mgmt="FT-EAP",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
ft_eap_pmksa_caching="1",
|
|
scan_freq="2412", only_add_network=True)
|
|
res3 = dev[0].request("PMKSA_GET %d" % id)
|
|
if res3 != '':
|
|
raise Exception("Unexpected PMKSA cache entry remains: " + res3)
|
|
|
|
for entry in res1.splitlines():
|
|
if "OK" not in dev[0].request("PMKSA_ADD %d %s" % (id, entry)):
|
|
raise Exception("Failed to add PMKSA entry")
|
|
|
|
dev[0].select_network(id)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Connection with the AP timed out")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP exchange after external PMKSA cache restore")
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("PMKSA_FLUSH")
|
|
# Add a PMKSA cache entry for FT-EAP with PMKSA caching disabled to confirm
|
|
# that the PMKID is not configured to the driver (this part requires manual
|
|
# check of the debug log currently).
|
|
dev[0].set_network(id, "ft_eap_pmksa_caching", "0")
|
|
for entry in res1.splitlines():
|
|
if "OK" not in dev[0].request("PMKSA_ADD %d %s" % (id, entry)):
|
|
raise Exception("Failed to add PMKSA entry")
|
|
|
|
def test_rsn_preauth_processing(dev, apdev):
|
|
"""RSN pre-authentication processing on AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['rsn_preauth'] = '1'
|
|
params['rsn_preauth_interfaces'] = "lo"
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
_bssid = binascii.unhexlify(bssid.replace(':', ''))
|
|
eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
|
|
password_hex="0123456789abcdef0123456789abcdef")
|
|
addr = dev[0].own_addr()
|
|
_addr = binascii.unhexlify(addr.replace(':', ''))
|
|
|
|
sock = socket.socket(socket.AF_PACKET, socket.SOCK_RAW,
|
|
socket.htons(0x88c7))
|
|
sock.bind(("lo", socket.htons(0x88c7)))
|
|
|
|
foreign = b"\x02\x03\x04\x05\x06\x07"
|
|
proto = b"\x88\xc7"
|
|
tests = []
|
|
# RSN: too short pre-auth packet (len=14)
|
|
tests += [_bssid + foreign + proto]
|
|
# Not EAPOL-Start
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 0, 0, 0)]
|
|
# RSN: pre-auth for foreign address 02:03:04:05:06:07
|
|
tests += [foreign + foreign + proto + struct.pack('>BBH', 0, 0, 0)]
|
|
# RSN: pre-auth for already association STA 02:00:00:00:00:00
|
|
tests += [_bssid + _addr + proto + struct.pack('>BBH', 0, 0, 0)]
|
|
# New STA
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 0, 1, 1)]
|
|
# IEEE 802.1X: received EAPOL-Start from STA
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 0, 1, 0)]
|
|
# frame too short for this IEEE 802.1X packet
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 0, 1, 1)]
|
|
# EAPOL-Key - Dropped key data from unauthorized Supplicant
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 2, 3, 0)]
|
|
# EAPOL-Encapsulated-ASF-Alert
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 2, 4, 0)]
|
|
# unknown IEEE 802.1X packet type
|
|
tests += [_bssid + foreign + proto + struct.pack('>BBH', 2, 255, 0)]
|
|
for t in tests:
|
|
sock.send(t)
|
|
|
|
def test_rsn_preauth_local_errors(dev, apdev):
|
|
"""RSN pre-authentication and local errors on AP"""
|
|
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
|
|
params['rsn_preauth'] = '1'
|
|
params['rsn_preauth_interfaces'] = "lo"
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
_bssid = binascii.unhexlify(bssid.replace(':', ''))
|
|
|
|
sock = socket.socket(socket.AF_PACKET, socket.SOCK_RAW,
|
|
socket.htons(0x88c7))
|
|
sock.bind(("lo", socket.htons(0x88c7)))
|
|
|
|
foreign = b"\x02\x03\x04\x05\x06\x07"
|
|
foreign2 = b"\x02\x03\x04\x05\x06\x08"
|
|
proto = b"\x88\xc7"
|
|
|
|
with alloc_fail(hapd, 1, "ap_sta_add;rsn_preauth_receive"):
|
|
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
|
|
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
|
|
|
|
with alloc_fail(hapd, 1, "eapol_auth_alloc;rsn_preauth_receive"):
|
|
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
|
|
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
|
|
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
|
|
|
|
with alloc_fail(hapd, 1, "eap_server_sm_init;ieee802_1x_new_station;rsn_preauth_receive"):
|
|
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
|
|
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
|
|
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
|
|
|
|
hapd.request("DISABLE")
|
|
tests = [(1, "=rsn_preauth_iface_add"),
|
|
(2, "=rsn_preauth_iface_add"),
|
|
(1, "l2_packet_init;rsn_preauth_iface_add"),
|
|
(1, "rsn_preauth_iface_init"),
|
|
(1, "rsn_preauth_iface_init")]
|
|
for count, func in tests:
|
|
with alloc_fail(hapd, count, func):
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("ENABLE succeeded unexpectedly")
|
|
|
|
hapd.set("rsn_preauth_interfaces", "lo lo lo does-not-exist lo ")
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("ENABLE succeeded unexpectedly")
|
|
hapd.set("rsn_preauth_interfaces", " lo lo ")
|
|
if "OK" not in hapd.request("ENABLE"):
|
|
raise Exception("ENABLE failed")
|
|
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
|
|
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
|