hostap/wpa_supplicant/mesh.c
Jouni Malinen 54fe48b9dc mesh: Use the shared function with IBSS to determine channel parameters
Automatically enable HT20, HT40+, HT40-, or VHT, based on driver
capabilities. This obsoletes the mesh_ht_mode network block parameter
that was previously used to configure HT parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00

538 lines
14 KiB
C

/*
* WPA Supplicant - Basic mesh mode routines
* Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "utils/uuid.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "ap/sta_info.h"
#include "ap/hostapd.h"
#include "ap/ieee802_11.h"
#include "config_ssid.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "notify.h"
#include "ap.h"
#include "mesh_mpm.h"
#include "mesh_rsn.h"
#include "mesh.h"
static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
{
wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
wpa_s->ifmsh = NULL;
wpa_s->current_ssid = NULL;
os_free(wpa_s->mesh_rsn);
wpa_s->mesh_rsn = NULL;
/* TODO: leave mesh (stop beacon). This will happen on link down
* anyway, so it's not urgent */
}
void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
struct hostapd_iface *ifmsh)
{
if (!ifmsh)
return;
if (ifmsh->mconf) {
mesh_mpm_deinit(wpa_s, ifmsh);
if (ifmsh->mconf->ies) {
ifmsh->mconf->ies = NULL;
/* We cannot free this struct
* because wpa_authenticator on
* hostapd side is also using it
* for now just set to NULL and
* let hostapd code free it.
*/
}
os_free(ifmsh->mconf);
ifmsh->mconf = NULL;
}
/* take care of shared data */
hostapd_interface_deinit(ifmsh);
hostapd_interface_free(ifmsh);
}
static struct mesh_conf * mesh_config_create(struct wpa_ssid *ssid)
{
struct mesh_conf *conf;
conf = os_zalloc(sizeof(struct mesh_conf));
if (!conf)
return NULL;
os_memcpy(conf->meshid, ssid->ssid, ssid->ssid_len);
conf->meshid_len = ssid->ssid_len;
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE)
conf->security |= MESH_CONF_SEC_AUTH |
MESH_CONF_SEC_AMPE;
else
conf->security |= MESH_CONF_SEC_NONE;
/* defaults */
conf->mesh_pp_id = MESH_PATH_PROTOCOL_HWMP;
conf->mesh_pm_id = MESH_PATH_METRIC_AIRTIME;
conf->mesh_cc_id = 0;
conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
conf->dot11MeshHoldingTimeout = ssid->dot11MeshHoldingTimeout;
return conf;
}
static void wpas_mesh_copy_groups(struct hostapd_data *bss,
struct wpa_supplicant *wpa_s)
{
int num_groups;
size_t groups_size;
for (num_groups = 0; wpa_s->conf->sae_groups[num_groups] > 0;
num_groups++)
;
groups_size = (num_groups + 1) * sizeof(wpa_s->conf->sae_groups[0]);
bss->conf->sae_groups = os_malloc(groups_size);
if (bss->conf->sae_groups)
os_memcpy(bss->conf->sae_groups, wpa_s->conf->sae_groups,
groups_size);
}
static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
struct hostapd_iface *ifmsh;
struct hostapd_data *bss;
struct hostapd_config *conf;
struct mesh_conf *mconf;
int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
size_t len;
int rate_len;
if (!wpa_s->conf->user_mpm) {
/* not much for us to do here */
wpa_msg(wpa_s, MSG_WARNING,
"user_mpm is not enabled in configuration");
return 0;
}
wpa_s->ifmsh = ifmsh = os_zalloc(sizeof(*wpa_s->ifmsh));
if (!ifmsh)
return -ENOMEM;
ifmsh->drv_flags = wpa_s->drv_flags;
ifmsh->num_bss = 1;
ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
sizeof(struct hostapd_data *));
if (!ifmsh->bss)
goto out_free;
ifmsh->bss[0] = bss = os_zalloc(sizeof(struct hostapd_data));
if (!bss)
goto out_free;
os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
bss->driver = wpa_s->driver;
bss->drv_priv = wpa_s->drv_priv;
bss->iface = ifmsh;
bss->mesh_sta_free_cb = mesh_mpm_free_sta;
wpa_s->assoc_freq = ssid->frequency;
wpa_s->current_ssid = ssid;
/* setup an AP config for auth processing */
conf = hostapd_config_defaults();
if (!conf)
goto out_free;
bss->conf = *conf->bss;
bss->conf->start_disabled = 1;
bss->conf->mesh = MESH_ENABLED;
bss->iconf = conf;
ifmsh->conf = conf;
ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));
mconf = mesh_config_create(ssid);
if (!mconf)
goto out_free;
ifmsh->mconf = mconf;
/* need conf->hw_mode for supported rates. */
if (ssid->frequency == 0) {
conf->hw_mode = HOSTAPD_MODE_IEEE80211G;
conf->channel = 1;
} else {
conf->hw_mode = ieee80211_freq_to_chan(ssid->frequency,
&conf->channel);
}
if (conf->hw_mode == NUM_HOSTAPD_MODES) {
wpa_printf(MSG_ERROR, "Unsupported mesh mode frequency: %d MHz",
ssid->frequency);
goto out_free;
}
if (ssid->mesh_basic_rates == NULL) {
/*
* XXX: Hack! This is so an MPM which correctly sets the ERP
* mandatory rates as BSSBasicRateSet doesn't reject us. We
* could add a new hw_mode HOSTAPD_MODE_IEEE80211G_ERP, but
* this is way easier. This also makes our BSSBasicRateSet
* advertised in beacons match the one in peering frames, sigh.
*/
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211G) {
conf->basic_rates = os_malloc(sizeof(basic_rates_erp));
if (!conf->basic_rates)
goto out_free;
os_memcpy(conf->basic_rates, basic_rates_erp,
sizeof(basic_rates_erp));
}
} else {
rate_len = 0;
while (1) {
if (ssid->mesh_basic_rates[rate_len] < 1)
break;
rate_len++;
}
conf->basic_rates = os_calloc(rate_len + 1, sizeof(int));
if (conf->basic_rates == NULL)
goto out_free;
os_memcpy(conf->basic_rates, ssid->mesh_basic_rates,
rate_len * sizeof(int));
conf->basic_rates[rate_len] = -1;
}
if (hostapd_setup_interface(ifmsh)) {
wpa_printf(MSG_ERROR,
"Failed to initialize hostapd interface for mesh");
return -1;
}
if (wpa_drv_init_mesh(wpa_s)) {
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
return -1;
}
if (mconf->security != MESH_CONF_SEC_NONE) {
if (ssid->passphrase == NULL) {
wpa_printf(MSG_ERROR,
"mesh: Passphrase for SAE not configured");
goto out_free;
}
bss->conf->wpa = ssid->proto;
bss->conf->wpa_key_mgmt = ssid->key_mgmt;
if (wpa_s->conf->sae_groups &&
wpa_s->conf->sae_groups[0] > 0) {
wpas_mesh_copy_groups(bss, wpa_s);
} else {
bss->conf->sae_groups =
os_malloc(sizeof(default_groups));
if (!bss->conf->sae_groups)
goto out_free;
os_memcpy(bss->conf->sae_groups, default_groups,
sizeof(default_groups));
}
len = os_strlen(ssid->passphrase);
bss->conf->ssid.wpa_passphrase =
dup_binstr(ssid->passphrase, len);
wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, mconf);
if (!wpa_s->mesh_rsn)
goto out_free;
}
wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
return 0;
out_free:
wpa_supplicant_mesh_deinit(wpa_s);
return -ENOMEM;
}
void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
const u8 *ies, size_t ie_len)
{
struct ieee802_11_elems elems;
wpa_msg(wpa_s, MSG_INFO,
"new peer notification for " MACSTR, MAC2STR(addr));
if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR,
MAC2STR(addr));
return;
}
wpa_mesh_new_mesh_peer(wpa_s, addr, &elems);
}
void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
struct wpabuf **extra_ie)
{
/* EID + 0-length (wildcard) mesh-id */
size_t ielen = 2;
if (wpabuf_resize(extra_ie, ielen) == 0) {
wpabuf_put_u8(*extra_ie, WLAN_EID_MESH_ID);
wpabuf_put_u8(*extra_ie, 0);
}
}
int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
struct wpa_driver_mesh_join_params params;
int ret = 0;
if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency) {
ret = -ENOENT;
goto out;
}
wpa_supplicant_mesh_deinit(wpa_s);
os_memset(&params, 0, sizeof(params));
params.meshid = ssid->ssid;
params.meshid_len = ssid->ssid_len;
ibss_mesh_setup_freq(wpa_s, ssid, &params.freq);
wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
if (ssid->beacon_int > 0)
params.beacon_int = ssid->beacon_int;
else if (wpa_s->conf->beacon_int > 0)
params.beacon_int = wpa_s->conf->beacon_int;
params.max_peer_links = wpa_s->conf->max_peer_links;
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
params.flags |= WPA_DRIVER_MESH_FLAG_AMPE;
wpa_s->conf->user_mpm = 1;
}
if (wpa_s->conf->user_mpm) {
params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
params.conf.flags &= ~WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
} else {
params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
}
if (wpa_supplicant_mesh_init(wpa_s, ssid)) {
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
ret = -1;
goto out;
}
if (wpa_s->ifmsh) {
params.ies = wpa_s->ifmsh->mconf->ies;
params.ie_len = wpa_s->ifmsh->mconf->ie_len;
params.basic_rates = wpa_s->ifmsh->basic_rates;
}
wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
ret = wpa_drv_join_mesh(wpa_s, &params);
if (ret)
wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d\n", ret);
/* hostapd sets the interface down until we associate */
wpa_drv_set_operstate(wpa_s, 1);
out:
return ret;
}
int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s)
{
int ret = 0;
wpa_msg(wpa_s, MSG_INFO, "leaving mesh");
/* Need to send peering close messages first */
wpa_supplicant_mesh_deinit(wpa_s);
ret = wpa_drv_leave_mesh(wpa_s);
if (ret)
wpa_msg(wpa_s, MSG_ERROR, "mesh leave error=%d", ret);
wpa_drv_set_operstate(wpa_s, 1);
return ret;
}
static int mesh_attr_text(const u8 *ies, size_t ies_len, char *buf, char *end)
{
struct ieee802_11_elems elems;
char *mesh_id, *pos = buf;
u8 *bss_basic_rate_set;
int bss_basic_rate_set_len, ret, i;
if (ieee802_11_parse_elems(ies, ies_len, &elems, 0) == ParseFailed)
return -1;
if (elems.mesh_id_len < 1)
return 0;
mesh_id = os_malloc(elems.mesh_id_len + 1);
if (mesh_id == NULL)
return -1;
os_memcpy(mesh_id, elems.mesh_id, elems.mesh_id_len);
mesh_id[elems.mesh_id_len] = '\0';
ret = os_snprintf(pos, end - pos, "mesh_id=%s\n", mesh_id);
os_free(mesh_id);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
if (elems.mesh_config_len > 6) {
ret = os_snprintf(pos, end - pos,
"active_path_selection_protocol_id=0x%02x\n"
"active_path_selection_metric_id=0x%02x\n"
"congestion_control_mode_id=0x%02x\n"
"synchronization_method_id=0x%02x\n"
"authentication_protocol_id=0x%02x\n"
"mesh_formation_info=0x%02x\n"
"mesh_capability=0x%02x\n",
elems.mesh_config[0], elems.mesh_config[1],
elems.mesh_config[2], elems.mesh_config[3],
elems.mesh_config[4], elems.mesh_config[5],
elems.mesh_config[6]);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
}
bss_basic_rate_set = os_malloc(elems.supp_rates_len +
elems.ext_supp_rates_len);
if (bss_basic_rate_set == NULL)
return -1;
bss_basic_rate_set_len = 0;
for (i = 0; i < elems.supp_rates_len; i++) {
if (elems.supp_rates[i] & 0x80) {
bss_basic_rate_set[bss_basic_rate_set_len++] =
(elems.supp_rates[i] & 0x7f) * 5;
}
}
for (i = 0; i < elems.ext_supp_rates_len; i++) {
if (elems.ext_supp_rates[i] & 0x80) {
bss_basic_rate_set[bss_basic_rate_set_len++] =
(elems.ext_supp_rates[i] & 0x7f) * 5;
}
}
if (bss_basic_rate_set_len > 0) {
ret = os_snprintf(pos, end - pos, "bss_basic_rate_set=%d",
bss_basic_rate_set[0]);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
for (i = 1; i < bss_basic_rate_set_len; i++) {
ret = os_snprintf(pos, end - pos, " %d",
bss_basic_rate_set[i]);
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
}
ret = os_snprintf(pos, end - pos, "\n");
if (os_snprintf_error(end - pos, ret))
return pos - buf;
pos += ret;
}
os_free(bss_basic_rate_set);
return pos - buf;
}
int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
char *end)
{
return mesh_attr_text(ies, ies_len, buf, end);
}
static int wpas_mesh_get_ifname(struct wpa_supplicant *wpa_s, char *ifname,
size_t len)
{
char *ifname_ptr = wpa_s->ifname;
int res;
res = os_snprintf(ifname, len, "mesh-%s-%d", ifname_ptr,
wpa_s->mesh_if_idx);
if (os_snprintf_error(len, res) ||
(os_strlen(ifname) >= IFNAMSIZ &&
os_strlen(wpa_s->ifname) < IFNAMSIZ)) {
/* Try to avoid going over the IFNAMSIZ length limit */
res = os_snprintf(ifname, len, "mesh-%d", wpa_s->mesh_if_idx);
if (os_snprintf_error(len, res))
return -1;
}
wpa_s->mesh_if_idx++;
return 0;
}
int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
size_t len)
{
struct wpa_interface iface;
struct wpa_supplicant *mesh_wpa_s;
u8 addr[ETH_ALEN];
if (ifname[0] == '\0' && wpas_mesh_get_ifname(wpa_s, ifname, len) < 0)
return -1;
if (wpa_drv_if_add(wpa_s, WPA_IF_MESH, ifname, NULL, NULL, NULL, addr,
NULL) < 0) {
wpa_printf(MSG_ERROR,
"mesh: Failed to create new mesh interface");
return -1;
}
wpa_printf(MSG_INFO, "mesh: Created virtual interface %s addr "
MACSTR, ifname, MAC2STR(addr));
os_memset(&iface, 0, sizeof(iface));
iface.ifname = ifname;
iface.driver = wpa_s->driver->name;
iface.driver_param = wpa_s->conf->driver_param;
iface.ctrl_interface = wpa_s->conf->ctrl_interface;
mesh_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface);
if (!mesh_wpa_s) {
wpa_printf(MSG_ERROR,
"mesh: Failed to create new wpa_supplicant interface");
wpa_supplicant_remove_iface(wpa_s->global, wpa_s, 0);
return -1;
}
mesh_wpa_s->mesh_if_created = 1;
mesh_wpa_s->parent = wpa_s;
return 0;
}