hostap/tests/remote/rutils.py
Janusz Dziedzic 925dea791a tests: remote: Stop wpa_supplicant/hostapd using pidfile
Instead of killall, use pidfile.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:18:00 +03:00

567 lines
17 KiB
Python

# Utils
# Copyright (c) 2016, Tieto Corporation
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import re
import time
from remotehost import Host
import hostapd
import config
class TestSkip(Exception):
def __init__(self, reason):
self.reason = reason
def __str__(self):
return self.reason
# get host based on name
def get_host(devices, dev_name):
dev = config.get_device(devices, dev_name)
host = Host(host=dev['hostname'],
ifname=dev['ifname'],
port=dev['port'],
name=dev['name'])
host.dev = dev
return host
# Run setup_hw - hardware specific
def setup_hw_host_iface(host, iface, setup_params, force_restart=False):
try:
setup_hw = setup_params['setup_hw']
restart = ""
try:
if setup_params['restart_device'] == True:
restart = "-R"
except:
pass
if force_restart:
restart = "-R"
host.execute([setup_hw, "-I", iface, restart])
except:
pass
def setup_hw_host(host, setup_params, force_restart=False):
ifaces = re.split('; | |, ', host.ifname)
for iface in ifaces:
setup_hw_host_iface(host, iface, setup_params, force_restart)
def setup_hw(hosts, setup_params, force_restart=False):
for host in hosts:
setup_hw_host(host, setup_params, force_restart)
# get traces - hw specific
def trace_start(hosts, setup_params):
for host in hosts:
trace_start_stop(host, setup_params, start=True)
def trace_stop(hosts, setup_params):
for host in hosts:
trace_start_stop(host, setup_params, start=False)
def trace_start_stop(host, setup_params, start):
if setup_params['trace'] == False:
return
try:
start_trace = setup_params['trace_start']
stop_trace = setup_params['trace_stop']
if start:
cmd = start_trace
else:
cmd = stop_trace
trace_dir = setup_params['log_dir'] + host.ifname + "/remote_traces"
host.add_log(trace_dir + "/*")
host.execute([cmd, "-I", host.ifname, "-D", trace_dir])
except:
pass
# get perf
def perf_start(hosts, setup_params):
for host in hosts:
perf_start_stop(host, setup_params, start=True)
def perf_stop(hosts, setup_params):
for host in hosts:
perf_start_stop(host, setup_params, start=False)
def perf_start_stop(host, setup_params, start):
if setup_params['perf'] == False:
return
try:
perf_start = setup_params['perf_start']
perf_stop = setup_params['perf_stop']
if start:
cmd = perf_start
else:
cmd = perf_stop
perf_dir = setup_params['log_dir'] + host.ifname + "/remote_perf"
host.add_log(perf_dir + "/*")
host.execute([cmd, "-I", host.ifname, "-D", perf_dir])
except:
pass
# hostapd/wpa_supplicant helpers
def run_hostapd(host, setup_params):
log_file = None
try:
tc_name = setup_params['tc_name']
log_dir = setup_params['log_dir']
log_file = log_dir + tc_name + "_hostapd_" + host.name + "_" + host.ifname + ".log"
host.execute(["rm", log_file])
log = " -f " + log_file
except:
log = ""
if log_file:
host.add_log(log_file)
pidfile = setup_params['log_dir'] + "hostapd_" + host.ifname + "_" + setup_params['tc_name'] + ".pid"
status, buf = host.execute([setup_params['hostapd'], "-B", "-ddt", "-g", "udp:" + host.port, "-P", pidfile, log])
if status != 0:
raise Exception("Could not run hostapd: " + buf)
def run_wpasupplicant(host, setup_params):
log_file = None
try:
tc_name = setup_params['tc_name']
log_dir = setup_params['log_dir']
log_file = log_dir + tc_name + "_wpa_supplicant_" + host.name + "_" + host.ifname + ".log"
host.execute(["rm", log_file])
log = " -f " + log_file
except:
log = ""
if log_file:
host.add_log(log_file)
pidfile = setup_params['log_dir'] + "wpa_supplicant_" + host.ifname + "_" + setup_params['tc_name'] + ".pid"
status, buf = host.execute([setup_params['wpa_supplicant'], "-B", "-ddt", "-g", "udp:" + host.port, "-P", pidfile, log])
if status != 0:
raise Exception("Could not run wpa_supplicant: " + buf)
def kill_wpasupplicant(host, setup_params):
pidfile = setup_params['log_dir'] + "wpa_supplicant_" + host.ifname + "_" + setup_params['tc_name'] + ".pid"
host.execute(["kill `cat " + pidfile + "`"])
def kill_hostapd(host, setup_params):
pidfile = setup_params['log_dir'] + "hostapd_" + host.ifname + "_" + setup_params['tc_name'] + ".pid"
host.execute(["kill `cat " + pidfile + "`"])
def get_ap_params(channel="1", bw="HT20", country="US", security="open", ht_capab=None, vht_capab=None):
ssid = "test_" + channel + "_" + security + "_" + bw
if bw == "b_only":
params = hostapd.b_only_params(channel, ssid, country)
elif bw == "g_only":
params = hostapd.g_only_params(channel, ssid, country)
elif bw == "g_only_wmm":
params = hostapd.g_only_params(channel, ssid, country)
params['wmm_enabled'] = "1"
elif bw == "a_only":
params = hostapd.a_only_params(channel, ssid, country)
elif bw == "a_only_wmm":
params = hostapd.a_only_params(channel, ssid, country)
params['wmm_enabled'] = "1"
elif bw == "HT20":
params = hostapd.ht20_params(channel, ssid, country)
if ht_capab:
try:
params['ht_capab'] = params['ht_capab'] + ht_capab
except:
params['ht_capab'] = ht_capab
elif bw == "HT40+":
params = hostapd.ht40_plus_params(channel, ssid, country)
if ht_capab:
params['ht_capab'] = params['ht_capab'] + ht_capab
elif bw == "HT40-":
params = hostapd.ht40_minus_params(channel, ssid, country)
if ht_capab:
params['ht_capab'] = params['ht_capab'] + ht_capab
elif bw == "VHT80":
params = hostapd.ht40_plus_params(channel, ssid, country)
if ht_capab:
params['ht_capab'] = params['ht_capab'] + ht_capab
if vht_capab:
try:
params['vht_capab'] = params['vht_capab'] + vht_capab
except:
params['vht_capab'] = vht_capab
params['ieee80211ac'] = "1"
params['vht_oper_chwidth'] = "1"
params['vht_oper_centr_freq_seg0_idx'] = str(int(channel) + 6)
else:
params = {}
# now setup security params
if security == "tkip":
sec_params = hostapd.wpa_params(passphrase="testtest")
elif security == "ccmp":
sec_params = hostapd.wpa2_params(passphrase="testtest")
elif security == "mixed":
sec_params = hostapd.wpa_mixed_params(passphrase="testtest")
elif security == "wep":
sec_params = {"wep_key0" : "123456789a",
"wep_default_key" : "0",
"auth_algs" : "1"}
elif security == "wep_shared":
sec_params = {"wep_key0" : "123456789a",
"wep_default_key" : "0",
"auth_algs" : "2"}
else:
sec_params = {}
params.update(sec_params)
return params
# ip helpers
def get_ipv4(client, ifname=None):
if ifname is None:
ifname = client.ifname
status, buf = client.execute(["ifconfig", ifname])
lines = buf.splitlines()
for line in lines:
res = line.find("inet addr:")
if res != -1:
break
if res != -1:
words = line.split()
addr = words[1].split(":")
return addr[1]
return "unknown"
def get_ipv6(client, ifname=None):
res = -1
if ifname is None:
ifname = client.ifname
status, buf = client.execute(["ifconfig", ifname])
lines = buf.splitlines()
for line in lines:
res = line.find("Scope:Link")
if res == -1:
res = line.find("<link>")
if res != -1:
break
if res != -1:
words = line.split()
if words[0] == "inet6" and words[1] == "addr:":
addr_mask = words[2]
addr = addr_mask.split("/")
return addr[0]
if words[0] == "inet6":
return words[1]
return "unknown"
def get_ip(client, addr_type="ipv6", iface=None):
if addr_type == "ipv6":
return get_ipv6(client, iface)
elif addr_type == "ipv4":
return get_ipv4(client, iface)
else:
return "unknown addr_type: " + addr_type
def get_ipv4_addr(setup_params, number):
try:
ipv4_base = setup_params['ipv4_test_net']
except:
ipv4_base = "172.16.12.0"
parts = ipv4_base.split('.')
ipv4 = parts[0] + "." + parts[1] + "." + parts[2] + "." + str(number)
return ipv4
def get_mac_addr(host, iface=None):
if iface == None:
iface = host.ifname
status, buf = host.execute(["ifconfig", iface])
if status != 0:
raise Exception("ifconfig " + iface)
words = buf.split()
found = 0
for word in words:
if found == 1:
return word
if word == "HWaddr" or word == "ether":
found = 1
raise Exception("Could not find HWaddr")
# connectivity/ping helpers
def get_ping_packet_loss(ping_res):
loss_line = ""
lines = ping_res.splitlines()
for line in lines:
if line.find("packet loss") != -1:
loss_line = line
break;
if loss_line == "":
return "100%"
sections = loss_line.split(",")
for section in sections:
if section.find("packet loss") != -1:
words = section.split()
return words[0]
return "100%"
def ac_to_ping_ac(qos):
if qos == "be":
qos_param = "0x00"
elif qos == "bk":
qos_param = "0x20"
elif qos == "vi":
qos_param = "0xA0"
elif qos == "vo":
qos_param = "0xE0"
else:
qos_param = "0x00"
return qos_param
def ping_run(host, ip, result, ifname=None, addr_type="ipv4", deadline="5", qos=None):
if ifname is None:
ifname = host.ifname
if addr_type == "ipv6":
ping = ["ping6"]
else:
ping = ["ping"]
ping = ping + ["-w", deadline, "-I", ifname]
if qos:
ping = ping + ["-Q", ac_to_ping_ac(qos)]
ping = ping + [ip]
flush_arp_cache(host)
thread = host.execute_run(ping, result)
return thread
def ping_wait(host, thread, timeout=None):
host.wait_execute_complete(thread, timeout)
if thread.isAlive():
raise Exception("ping thread still alive")
def flush_arp_cache(host):
host.execute(["ip", "-s", "-s", "neigh", "flush", "all"])
def check_connectivity(a, b, addr_type="ipv4", deadline="5", qos=None):
addr_a = get_ip(a, addr_type)
addr_b = get_ip(b, addr_type)
if addr_type == "ipv4":
ping = ["ping"]
else:
ping = ["ping6"]
ping_a_b = ping + ["-w", deadline, "-I", a.ifname]
ping_b_a = ping + ["-w", deadline, "-I", b.ifname]
if qos:
ping_a_b = ping_a_b + ["-Q", ac_to_ping_ac(qos)]
ping_b_a = ping_b_a + ["-Q", ac_to_ping_ac(qos)]
ping_a_b = ping_a_b + [addr_b]
ping_b_a = ping_b_a + [addr_a]
# Clear arp cache
flush_arp_cache(a)
flush_arp_cache(b)
status, buf = a.execute(ping_a_b)
if status == 2 and ping == "ping6":
# tentative possible for a while, try again
time.sleep(3)
status, buf = a.execute(ping_a_b)
if status != 0:
raise Exception("ping " + a.name + "/" + a.ifname + " >> " + b.name + "/" + b.ifname)
a_b = get_ping_packet_loss(buf)
# Clear arp cache
flush_arp_cache(a)
flush_arp_cache(b)
status, buf = b.execute(ping_b_a)
if status != 0:
raise Exception("ping " + b.name + "/" + b.ifname + " >> " + a.name + "/" + a.ifname)
b_a = get_ping_packet_loss(buf)
if int(a_b[:-1]) > 40:
raise Exception("Too high packet lost: " + a_b)
if int(b_a[:-1]) > 40:
raise Exception("Too high packet lost: " + b_a)
return a_b, b_a
# iperf helpers
def get_iperf_speed(iperf_res, pattern="Mbits/sec"):
lines = iperf_res.splitlines()
sum_line = ""
last_line = ""
count = 0
res = -1
# first find last SUM line
for line in lines:
res = line.find("[SUM]")
if res != -1:
sum_line = line
# next check SUM status
if sum_line != "":
words = sum_line.split()
for word in words:
res = word.find(pattern)
if res != -1:
return words[count - 1] + " " + pattern
count = count + 1
# no SUM - one thread - find last line
for line in lines:
res = line.find(pattern)
if res != -1:
last_line = line
if last_line == "":
return "0 " + pattern
count = 0
words = last_line.split()
for word in words:
res = word.find(pattern)
if res != -1:
return words[count - 1] + " " + pattern
break;
count = count + 1
return "0 " + pattern
def ac_to_iperf_ac(qos):
if qos == "be":
qos_param = "0x00"
elif qos == "bk":
qos_param = "0x20"
elif qos == "vi":
qos_param = "0xA0"
elif qos == "vo":
qos_param = "0xE0"
else:
qos_param = "0x00"
return qos_param
def iperf_run(server, client, server_ip, client_res, server_res,
l4="udp", bw="30M", test_time="30", parallel="5",
qos="be", param=" -i 5 ", ifname=None, l3="ipv4",
port="5001", iperf="iperf"):
if ifname == None:
ifname = client.ifname
if iperf == "iperf":
iperf_server = [iperf]
elif iperf == "iperf3":
iperf_server = [iperf, "-1"]
if l3 == "ipv4":
iperf_client = [iperf, "-c", server_ip, "-p", port]
iperf_server = iperf_server + ["-p", port]
elif l3 == "ipv6":
iperf_client = [iperf, "-V", "-c", server_ip + "%" + ifname, "-p", port]
iperf_server = iperf_server + ["-V", "-p", port]
else:
return -1, -1
iperf_server = iperf_server + ["-s", "-f", "m", param]
iperf_client = iperf_client + ["-f", "m", "-t", test_time]
if parallel != "1":
iperf_client = iperf_client + ["-P", parallel]
if l4 == "udp":
if iperf != "iperf3":
iperf_server = iperf_server + ["-u"]
iperf_client = iperf_client + ["-u", "-b", bw]
if qos:
iperf_client = iperf_client + ["-Q", ac_to_iperf_ac(qos)]
flush_arp_cache(server)
flush_arp_cache(client)
server_thread = server.execute_run(iperf_server, server_res)
time.sleep(1)
client_thread = client.execute_run(iperf_client, client_res)
return server_thread, client_thread
def iperf_wait(server, client, server_thread, client_thread, timeout=None, iperf="iperf"):
client.wait_execute_complete(client_thread, timeout)
if client_thread.isAlive():
raise Exception("iperf client thread still alive")
server.wait_execute_complete(server_thread, 5)
if server_thread.isAlive():
server.execute(["killall", "-s", "INT", iperf])
time.sleep(1)
server.wait_execute_complete(server_thread, 5)
if server_thread.isAlive():
raise Exception("iperf server thread still alive")
return
def run_tp_test(server, client, l3="ipv4", iperf="iperf", l4="tcp", test_time="10", parallel="5",
qos="be", bw="30M", ifname=None, port="5001"):
client_res = []
server_res = []
server_ip = get_ip(server, l3)
time.sleep(1)
server_thread, client_thread = iperf_run(server, client, server_ip, client_res, server_res,
l3=l3, iperf=iperf, l4=l4, test_time=test_time,
parallel=parallel, qos=qos, bw=bw, ifname=ifname,
port=port)
iperf_wait(server, client, server_thread, client_thread, iperf=iperf, timeout=int(test_time) + 10)
if client_res[0] != 0:
raise Exception(iperf + " client: " + client_res[1])
if server_res[0] != 0:
raise Exception(iperf + " server: " + server_res[1])
if client_res[1] is None:
raise Exception(iperf + " client result issue")
if server_res[1] is None:
raise Exception(iperf + " server result issue")
if iperf == "iperf":
result = server_res[1]
if iperf == "iperf3":
result = client_res[1]
speed = get_iperf_speed(result)
return speed
def get_iperf_bw(bw, parallel, spacial_streams=2):
if bw == "b_only":
max_tp = 11
elif bw == "g_only" or bw == "g_only_wmm" or bw == "a_only" or bw == "a_only_wmm":
max_tp = 54
elif bw == "HT20":
max_tp = 72 * spacial_streams
elif bw == "HT40+" or bw == "HT40-":
max_tp = 150 * spacial_streams
elif bw == "VHT80":
max_tp = 433 * spacial_streams
else:
max_tp = 150
max_tp = 1.2 * max_tp
return str(int(max_tp/int(parallel))) + "M"