jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/src/ap/dfs.c
Sergey Matyukevich 683e7c7559 DFS: Add new hostapd_is_dfs_overlap() helper 
Add a new hostapd_is_dfs_overlap() helper function to DFS module. This
function tells whether the selected frequency range overlaps with DFS
channels in the current hostapd configuration. Selected frequency reange
is specified by its center frequency and bandwidth.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2020-03-29 21:15:16 +03:00

1345 lines
35 KiB
C
Raw Blame History

/*
* DFS - Dynamic Frequency Selection
* Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
* Copyright (c) 2013-2017, Qualcomm Atheros, Inc.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "common/ieee802_11_defs.h"
#include "common/hw_features_common.h"
#include "common/wpa_ctrl.h"
#include "hostapd.h"
#include "ap_drv_ops.h"
#include "drivers/driver.h"
#include "dfs.h"
static int dfs_get_used_n_chans(struct hostapd_iface *iface, int *seg1)
{
int n_chans = 1;
*seg1 = 0;
if (iface->conf->ieee80211n && iface->conf->secondary_channel)
n_chans = 2;
if (iface->conf->ieee80211ac || iface->conf->ieee80211ax) {
switch (hostapd_get_oper_chwidth(iface->conf)) {
case CHANWIDTH_USE_HT:
break;
case CHANWIDTH_80MHZ:
n_chans = 4;
break;
case CHANWIDTH_160MHZ:
n_chans = 8;
break;
case CHANWIDTH_80P80MHZ:
n_chans = 4;
*seg1 = 4;
break;
default:
break;
}
}
return n_chans;
}
static int dfs_channel_available(struct hostapd_channel_data *chan,
int skip_radar)
{
/*
* When radar detection happens, CSA is performed. However, there's no
* time for CAC, so radar channels must be skipped when finding a new
* channel for CSA, unless they are available for immediate use.
*/
if (skip_radar && (chan->flag & HOSTAPD_CHAN_RADAR) &&
((chan->flag & HOSTAPD_CHAN_DFS_MASK) !=
HOSTAPD_CHAN_DFS_AVAILABLE))
return 0;
if (chan->flag & HOSTAPD_CHAN_DISABLED)
return 0;
if ((chan->flag & HOSTAPD_CHAN_RADAR) &&
((chan->flag & HOSTAPD_CHAN_DFS_MASK) ==
HOSTAPD_CHAN_DFS_UNAVAILABLE))
return 0;
return 1;
}
static int dfs_is_chan_allowed(struct hostapd_channel_data *chan, int n_chans)
{
/*
* The tables contain first valid channel number based on channel width.
* We will also choose this first channel as the control one.
*/
int allowed_40[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
184, 192 };
/*
* VHT80, valid channels based on center frequency:
* 42, 58, 106, 122, 138, 155
*/
int allowed_80[] = { 36, 52, 100, 116, 132, 149 };
/*
* VHT160 valid channels based on center frequency:
* 50, 114
*/
int allowed_160[] = { 36, 100 };
int *allowed = allowed_40;
unsigned int i, allowed_no = 0;
switch (n_chans) {
case 2:
allowed = allowed_40;
allowed_no = ARRAY_SIZE(allowed_40);
break;
case 4:
allowed = allowed_80;
allowed_no = ARRAY_SIZE(allowed_80);
break;
case 8:
allowed = allowed_160;
allowed_no = ARRAY_SIZE(allowed_160);
break;
default:
wpa_printf(MSG_DEBUG, "Unknown width for %d channels", n_chans);
break;
}
for (i = 0; i < allowed_no; i++) {
if (chan->chan == allowed[i])
return 1;
}
return 0;
}
static struct hostapd_channel_data *
dfs_get_chan_data(struct hostapd_hw_modes *mode, int freq, int first_chan_idx)
{
int i;
for (i = first_chan_idx; i < mode->num_channels; i++) {
if (mode->channels[i].freq == freq)
return &mode->channels[i];
}
return NULL;
}
static int dfs_chan_range_available(struct hostapd_hw_modes *mode,
int first_chan_idx, int num_chans,
int skip_radar)
{
struct hostapd_channel_data *first_chan, *chan;
int i;
u32 bw = num_chan_to_bw(num_chans);
if (first_chan_idx + num_chans > mode->num_channels) {
wpa_printf(MSG_DEBUG,
"DFS: some channels in range not defined");
return 0;
}
first_chan = &mode->channels[first_chan_idx];
/* hostapd DFS implementation assumes the first channel as primary.
* If it's not allowed to use the first channel as primary, decline the
* whole channel range. */
if (!chan_pri_allowed(first_chan)) {
wpa_printf(MSG_DEBUG, "DFS: primary chanenl not allowed");
return 0;
}
for (i = 0; i < num_chans; i++) {
chan = dfs_get_chan_data(mode, first_chan->freq + i * 20,
first_chan_idx);
if (!chan) {
wpa_printf(MSG_DEBUG, "DFS: no channel data for %d",
first_chan->freq + i * 20);
return 0;
}
/* HT 40 MHz secondary channel availability checked only for
* primary channel */
if (!chan_bw_allowed(chan, bw, 1, !i)) {
wpa_printf(MSG_DEBUG, "DFS: bw now allowed for %d",
first_chan->freq + i * 20);
return 0;
}
if (!dfs_channel_available(chan, skip_radar)) {
wpa_printf(MSG_DEBUG, "DFS: channel not available %d",
first_chan->freq + i * 20);
return 0;
}
}
return 1;
}
static int is_in_chanlist(struct hostapd_iface *iface,
struct hostapd_channel_data *chan)
{
if (!iface->conf->acs_ch_list.num)
return 1;
return freq_range_list_includes(&iface->conf->acs_ch_list, chan->chan);
}
/*
* The function assumes HT40+ operation.
* Make sure to adjust the following variables after calling this:
* - hapd->secondary_channel
* - hapd->vht/he_oper_centr_freq_seg0_idx
* - hapd->vht/he_oper_centr_freq_seg1_idx
*/
static int dfs_find_channel(struct hostapd_iface *iface,
struct hostapd_channel_data **ret_chan,
int idx, int skip_radar)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int i, channel_idx = 0, n_chans, n_chans1;
mode = iface->current_mode;
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
wpa_printf(MSG_DEBUG, "DFS new chan checking %d channels", n_chans);
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
/* Skip HT40/VHT incompatible channels */
if (iface->conf->ieee80211n &&
iface->conf->secondary_channel &&
(!dfs_is_chan_allowed(chan, n_chans) ||
!(chan->allowed_bw & HOSTAPD_CHAN_WIDTH_40P))) {
wpa_printf(MSG_DEBUG,
"DFS: channel %d (%d) is incompatible",
chan->freq, chan->chan);
continue;
}
/* Skip incompatible chandefs */
if (!dfs_chan_range_available(mode, i, n_chans, skip_radar)) {
wpa_printf(MSG_DEBUG,
"DFS: range not available for %d (%d)",
chan->freq, chan->chan);
continue;
}
if (!is_in_chanlist(iface, chan)) {
wpa_printf(MSG_DEBUG,
"DFS: channel %d (%d) not in chanlist",
chan->freq, chan->chan);
continue;
}
if (ret_chan && idx == channel_idx) {
wpa_printf(MSG_DEBUG, "Selected channel %d (%d)",
chan->freq, chan->chan);
*ret_chan = chan;
return idx;
}
wpa_printf(MSG_DEBUG, "Adding channel %d (%d)",
chan->freq, chan->chan);
channel_idx++;
}
return channel_idx;
}
static void dfs_adjust_center_freq(struct hostapd_iface *iface,
struct hostapd_channel_data *chan,
int secondary_channel,
int sec_chan_idx_80p80,
u8 *oper_centr_freq_seg0_idx,
u8 *oper_centr_freq_seg1_idx)
{
if (!iface->conf->ieee80211ac && !iface->conf->ieee80211ax)
return;
if (!chan)
return;
*oper_centr_freq_seg1_idx = 0;
switch (hostapd_get_oper_chwidth(iface->conf)) {
case CHANWIDTH_USE_HT:
if (secondary_channel == 1)
*oper_centr_freq_seg0_idx = chan->chan + 2;
else if (secondary_channel == -1)
*oper_centr_freq_seg0_idx = chan->chan - 2;
else
*oper_centr_freq_seg0_idx = chan->chan;
break;
case CHANWIDTH_80MHZ:
*oper_centr_freq_seg0_idx = chan->chan + 6;
break;
case CHANWIDTH_160MHZ:
*oper_centr_freq_seg0_idx = chan->chan + 14;
break;
case CHANWIDTH_80P80MHZ:
*oper_centr_freq_seg0_idx = chan->chan + 6;
*oper_centr_freq_seg1_idx = sec_chan_idx_80p80 + 6;
break;
default:
wpa_printf(MSG_INFO,
"DFS: Unsupported channel width configuration");
*oper_centr_freq_seg0_idx = 0;
break;
}
wpa_printf(MSG_DEBUG, "DFS adjusting VHT center frequency: %d, %d",
*oper_centr_freq_seg0_idx,
*oper_centr_freq_seg1_idx);
}
/* Return start channel idx we will use for mode->channels[idx] */
static int dfs_get_start_chan_idx(struct hostapd_iface *iface, int *seg1_start)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int channel_no = iface->conf->channel;
int res = -1, i;
int chan_seg1 = -1;
*seg1_start = -1;
/* HT40- */
if (iface->conf->ieee80211n && iface->conf->secondary_channel == -1)
channel_no -= 4;
/* VHT/HE */
if (iface->conf->ieee80211ac || iface->conf->ieee80211ax) {
switch (hostapd_get_oper_chwidth(iface->conf)) {
case CHANWIDTH_USE_HT:
break;
case CHANWIDTH_80MHZ:
channel_no = hostapd_get_oper_centr_freq_seg0_idx(
iface->conf) - 6;
break;
case CHANWIDTH_160MHZ:
channel_no = hostapd_get_oper_centr_freq_seg0_idx(
iface->conf) - 14;
break;
case CHANWIDTH_80P80MHZ:
channel_no = hostapd_get_oper_centr_freq_seg0_idx(
iface->conf) - 6;
chan_seg1 = hostapd_get_oper_centr_freq_seg1_idx(
iface->conf) - 6;
break;
default:
wpa_printf(MSG_INFO,
"DFS only VHT20/40/80/160/80+80 is supported now");
channel_no = -1;
break;
}
}
/* Get idx */
mode = iface->current_mode;
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
if (chan->chan == channel_no) {
res = i;
break;
}
}
if (res != -1 && chan_seg1 > -1) {
int found = 0;
/* Get idx for seg1 */
mode = iface->current_mode;
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
if (chan->chan == chan_seg1) {
*seg1_start = i;
found = 1;
break;
}
}
if (!found)
res = -1;
}
if (res == -1) {
wpa_printf(MSG_DEBUG,
"DFS chan_idx seems wrong; num-ch: %d ch-no: %d conf-ch-no: %d 11n: %d sec-ch: %d vht-oper-width: %d",
mode->num_channels, channel_no, iface->conf->channel,
iface->conf->ieee80211n,
iface->conf->secondary_channel,
hostapd_get_oper_chwidth(iface->conf));
for (i = 0; i < mode->num_channels; i++) {
wpa_printf(MSG_DEBUG, "Available channel: %d",
mode->channels[i].chan);
}
}
return res;
}
/* At least one channel have radar flag */
static int dfs_check_chans_radar(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i, res = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_RADAR)
res++;
}
return res;
}
/* All channels available */
static int dfs_check_chans_available(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_DISABLED)
break;
if (!(channel->flag & HOSTAPD_CHAN_RADAR))
continue;
if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) !=
HOSTAPD_CHAN_DFS_AVAILABLE)
break;
}
return i == n_chans;
}
/* At least one channel unavailable */
static int dfs_check_chans_unavailable(struct hostapd_iface *iface,
int start_chan_idx,
int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i, res = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_DISABLED)
res++;
if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) ==
HOSTAPD_CHAN_DFS_UNAVAILABLE)
res++;
}
return res;
}
static struct hostapd_channel_data *
dfs_get_valid_channel(struct hostapd_iface *iface,
int *secondary_channel,
u8 *oper_centr_freq_seg0_idx,
u8 *oper_centr_freq_seg1_idx,
int skip_radar)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan = NULL;
struct hostapd_channel_data *chan2 = NULL;
int num_available_chandefs;
int chan_idx, chan_idx2;
int sec_chan_idx_80p80 = -1;
int i;
u32 _rand;
wpa_printf(MSG_DEBUG, "DFS: Selecting random channel");
*secondary_channel = 0;
*oper_centr_freq_seg0_idx = 0;
*oper_centr_freq_seg1_idx = 0;
if (iface->current_mode == NULL)
return NULL;
mode = iface->current_mode;
if (mode->mode != HOSTAPD_MODE_IEEE80211A)
return NULL;
/* Get the count first */
num_available_chandefs = dfs_find_channel(iface, NULL, 0, skip_radar);
wpa_printf(MSG_DEBUG, "DFS: num_available_chandefs=%d",
num_available_chandefs);
if (num_available_chandefs == 0)
return NULL;
if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
return NULL;
chan_idx = _rand % num_available_chandefs;
dfs_find_channel(iface, &chan, chan_idx, skip_radar);
if (!chan) {
wpa_printf(MSG_DEBUG, "DFS: no random channel found");
return NULL;
}
wpa_printf(MSG_DEBUG, "DFS: got random channel %d (%d)",
chan->freq, chan->chan);
/* dfs_find_channel() calculations assume HT40+ */
if (iface->conf->secondary_channel)
*secondary_channel = 1;
else
*secondary_channel = 0;
/* Get secondary channel for HT80P80 */
if (hostapd_get_oper_chwidth(iface->conf) == CHANWIDTH_80P80MHZ) {
if (num_available_chandefs <= 1) {
wpa_printf(MSG_ERROR,
"only 1 valid chan, can't support 80+80");
return NULL;
}
/*
* Loop all channels except channel1 to find a valid channel2
* that is not adjacent to channel1.
*/
for (i = 0; i < num_available_chandefs - 1; i++) {
/* start from chan_idx + 1, end when chan_idx - 1 */
chan_idx2 = (chan_idx + 1 + i) % num_available_chandefs;
dfs_find_channel(iface, &chan2, chan_idx2, skip_radar);
if (chan2 && abs(chan2->chan - chan->chan) > 12) {
/* two channels are not adjacent */
sec_chan_idx_80p80 = chan2->chan;
wpa_printf(MSG_DEBUG,
"DFS: got second chan: %d (%d)",
chan2->freq, chan2->chan);
break;
}
}
/* Check if we got a valid secondary channel which is not
* adjacent to the first channel.
*/
if (sec_chan_idx_80p80 == -1) {
wpa_printf(MSG_INFO,
"DFS: failed to get chan2 for 80+80");
return NULL;
}
}
dfs_adjust_center_freq(iface, chan,
*secondary_channel,
sec_chan_idx_80p80,
oper_centr_freq_seg0_idx,
oper_centr_freq_seg1_idx);
return chan;
}
static int set_dfs_state_freq(struct hostapd_iface *iface, int freq, u32 state)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan = NULL;
int i;
mode = iface->current_mode;
if (mode == NULL)
return 0;
wpa_printf(MSG_DEBUG, "set_dfs_state 0x%X for %d MHz", state, freq);
for (i = 0; i < iface->current_mode->num_channels; i++) {
chan = &iface->current_mode->channels[i];
if (chan->freq == freq) {
if (chan->flag & HOSTAPD_CHAN_RADAR) {
chan->flag &= ~HOSTAPD_CHAN_DFS_MASK;
chan->flag |= state;
return 1; /* Channel found */
}
}
}
wpa_printf(MSG_WARNING, "Can't set DFS state for freq %d MHz", freq);
return 0;
}
static int set_dfs_state(struct hostapd_iface *iface, int freq, int ht_enabled,
int chan_offset, int chan_width, int cf1,
int cf2, u32 state)
{
int n_chans = 1, i;
struct hostapd_hw_modes *mode;
int frequency = freq;
int frequency2 = 0;
int ret = 0;
mode = iface->current_mode;
if (mode == NULL)
return 0;
if (mode->mode != HOSTAPD_MODE_IEEE80211A) {
wpa_printf(MSG_WARNING, "current_mode != IEEE80211A");
return 0;
}
/* Seems cf1 and chan_width is enough here */
switch (chan_width) {
case CHAN_WIDTH_20_NOHT:
case CHAN_WIDTH_20:
n_chans = 1;
if (frequency == 0)
frequency = cf1;
break;
case CHAN_WIDTH_40:
n_chans = 2;
frequency = cf1 - 10;
break;
case CHAN_WIDTH_80:
n_chans = 4;
frequency = cf1 - 30;
break;
case CHAN_WIDTH_80P80:
n_chans = 4;
frequency = cf1 - 30;
frequency2 = cf2 - 30;
break;
case CHAN_WIDTH_160:
n_chans = 8;
frequency = cf1 - 70;
break;
default:
wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
chan_width);
break;
}
wpa_printf(MSG_DEBUG, "DFS freq: %dMHz, n_chans: %d", frequency,
n_chans);
for (i = 0; i < n_chans; i++) {
ret += set_dfs_state_freq(iface, frequency, state);
frequency = frequency + 20;
if (chan_width == CHAN_WIDTH_80P80) {
ret += set_dfs_state_freq(iface, frequency2, state);
frequency2 = frequency2 + 20;
}
}
return ret;
}
static int dfs_are_channels_overlapped(struct hostapd_iface *iface, int freq,
int chan_width, int cf1, int cf2)
{
int start_chan_idx, start_chan_idx1;
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int n_chans, n_chans1, i, j, frequency = freq, radar_n_chans = 1;
u8 radar_chan;
int res = 0;
/* Our configuration */
mode = iface->current_mode;
start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Check we are on DFS channel(s) */
if (!dfs_check_chans_radar(iface, start_chan_idx, n_chans))
return 0;
/* Reported via radar event */
switch (chan_width) {
case CHAN_WIDTH_20_NOHT:
case CHAN_WIDTH_20:
radar_n_chans = 1;
if (frequency == 0)
frequency = cf1;
break;
case CHAN_WIDTH_40:
radar_n_chans = 2;
frequency = cf1 - 10;
break;
case CHAN_WIDTH_80:
radar_n_chans = 4;
frequency = cf1 - 30;
break;
case CHAN_WIDTH_160:
radar_n_chans = 8;
frequency = cf1 - 70;
break;
default:
wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
chan_width);
break;
}
ieee80211_freq_to_chan(frequency, &radar_chan);
for (i = 0; i < n_chans; i++) {
chan = &mode->channels[start_chan_idx + i];
if (!(chan->flag & HOSTAPD_CHAN_RADAR))
continue;
for (j = 0; j < radar_n_chans; j++) {
wpa_printf(MSG_DEBUG, "checking our: %d, radar: %d",
chan->chan, radar_chan + j * 4);
if (chan->chan == radar_chan + j * 4)
res++;
}
}
wpa_printf(MSG_DEBUG, "overlapped: %d", res);
return res;
}
static unsigned int dfs_get_cac_time(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i;
unsigned int cac_time_ms = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (!(channel->flag & HOSTAPD_CHAN_RADAR))
continue;
if (channel->dfs_cac_ms > cac_time_ms)
cac_time_ms = channel->dfs_cac_ms;
}
return cac_time_ms;
}
/*
* Main DFS handler
* 1 - continue channel/ap setup
* 0 - channel/ap setup will be continued after CAC
* -1 - hit critical error
*/
int hostapd_handle_dfs(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int res, n_chans, n_chans1, start_chan_idx, start_chan_idx1;
int skip_radar = 0;
if (is_6ghz_freq(iface->freq))
return 1;
if (!iface->current_mode) {
/*
* This can happen with drivers that do not provide mode
* information and as such, cannot really use hostapd for DFS.
*/
wpa_printf(MSG_DEBUG,
"DFS: No current_mode information - assume no need to perform DFS operations by hostapd");
return 1;
}
iface->cac_started = 0;
do {
/* Get start (first) channel for current configuration */
start_chan_idx = dfs_get_start_chan_idx(iface,
&start_chan_idx1);
if (start_chan_idx == -1)
return -1;
/* Get number of used channels, depend on width */
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Setup CAC time */
iface->dfs_cac_ms = dfs_get_cac_time(iface, start_chan_idx,
n_chans);
/* Check if any of configured channels require DFS */
res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
wpa_printf(MSG_DEBUG,
"DFS %d channels required radar detection",
res);
if (!res)
return 1;
/* Check if all channels are DFS available */
res = dfs_check_chans_available(iface, start_chan_idx, n_chans);
wpa_printf(MSG_DEBUG,
"DFS all channels available, (SKIP CAC): %s",
res ? "yes" : "no");
if (res)
return 1;
/* Check if any of configured channels is unavailable */
res = dfs_check_chans_unavailable(iface, start_chan_idx,
n_chans);
wpa_printf(MSG_DEBUG, "DFS %d chans unavailable - choose other channel: %s",
res, res ? "yes": "no");
if (res) {
int sec = 0;
u8 cf1 = 0, cf2 = 0;
channel = dfs_get_valid_channel(iface, &sec, &cf1, &cf2,
skip_radar);
if (!channel) {
wpa_printf(MSG_ERROR, "could not get valid channel");
hostapd_set_state(iface, HAPD_IFACE_DFS);
return 0;
}
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = sec;
hostapd_set_oper_centr_freq_seg0_idx(iface->conf, cf1);
hostapd_set_oper_centr_freq_seg1_idx(iface->conf, cf2);
}
} while (res);
/* Finally start CAC */
hostapd_set_state(iface, HAPD_IFACE_DFS);
wpa_printf(MSG_DEBUG, "DFS start CAC on %d MHz", iface->freq);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
"freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds",
iface->freq,
iface->conf->channel, iface->conf->secondary_channel,
hostapd_get_oper_chwidth(iface->conf),
hostapd_get_oper_centr_freq_seg0_idx(iface->conf),
hostapd_get_oper_centr_freq_seg1_idx(iface->conf),
iface->dfs_cac_ms / 1000);
res = hostapd_start_dfs_cac(
iface, iface->conf->hw_mode, iface->freq, iface->conf->channel,
iface->conf->ieee80211n, iface->conf->ieee80211ac,
iface->conf->ieee80211ax,
iface->conf->secondary_channel,
hostapd_get_oper_chwidth(iface->conf),
hostapd_get_oper_centr_freq_seg0_idx(iface->conf),
hostapd_get_oper_centr_freq_seg1_idx(iface->conf));
if (res) {
wpa_printf(MSG_ERROR, "DFS start_dfs_cac() failed, %d", res);
return -1;
}
return 0;
}
int hostapd_is_dfs_chan_available(struct hostapd_iface *iface)
{
int n_chans, n_chans1, start_chan_idx, start_chan_idx1;
/* Get the start (first) channel for current configuration */
start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
if (start_chan_idx < 0)
return 0;
/* Get the number of used channels, depending on width */
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Check if all channels are DFS available */
return dfs_check_chans_available(iface, start_chan_idx, n_chans);
}
int hostapd_dfs_complete_cac(struct hostapd_iface *iface, int success, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_COMPLETED
"success=%d freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
success, freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
if (success) {
/* Complete iface/ap configuration */
if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD) {
/* Complete AP configuration for the first bring up. */
if (iface->state != HAPD_IFACE_ENABLED)
hostapd_setup_interface_complete(iface, 0);
else
iface->cac_started = 0;
} else {
set_dfs_state(iface, freq, ht_enabled, chan_offset,
chan_width, cf1, cf2,
HOSTAPD_CHAN_DFS_AVAILABLE);
/*
* Just mark the channel available when CAC completion
* event is received in enabled state. CAC result could
* have been propagated from another radio having the
* same regulatory configuration. When CAC completion is
* received during non-HAPD_IFACE_ENABLED state, make
* sure the configured channel is available because this
* CAC completion event could have been propagated from
* another radio.
*/
if (iface->state != HAPD_IFACE_ENABLED &&
hostapd_is_dfs_chan_available(iface)) {
hostapd_setup_interface_complete(iface, 0);
iface->cac_started = 0;
}
}
}
return 0;
}
int hostapd_dfs_pre_cac_expired(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_PRE_CAC_EXPIRED
"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
/* Proceed only if DFS is not offloaded to the driver */
if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
return 0;
set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
cf1, cf2, HOSTAPD_CHAN_DFS_USABLE);
return 0;
}
static struct hostapd_channel_data *
dfs_downgrade_bandwidth(struct hostapd_iface *iface, int *secondary_channel,
u8 *oper_centr_freq_seg0_idx,
u8 *oper_centr_freq_seg1_idx, int *skip_radar)
{
struct hostapd_channel_data *channel;
for (;;) {
channel = dfs_get_valid_channel(iface, secondary_channel,
oper_centr_freq_seg0_idx,
oper_centr_freq_seg1_idx,
*skip_radar);
if (channel) {
wpa_printf(MSG_DEBUG, "DFS: Selected channel: %d",
channel->chan);
return channel;
}
if (*skip_radar) {
*skip_radar = 0;
} else {
if (iface->conf->vht_oper_chwidth == CHANWIDTH_USE_HT)
break;
*skip_radar = 1;
iface->conf->vht_oper_chwidth--;
}
}
wpa_printf(MSG_INFO,
"%s: no DFS channels left, waiting for NOP to finish",
__func__);
return NULL;
}
static int hostapd_dfs_start_channel_switch_cac(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int secondary_channel;
u8 oper_centr_freq_seg0_idx = 0;
u8 oper_centr_freq_seg1_idx = 0;
int skip_radar = 0;
int err = 1;
/* Radar detected during active CAC */
iface->cac_started = 0;
channel = dfs_get_valid_channel(iface, &secondary_channel,
&oper_centr_freq_seg0_idx,
&oper_centr_freq_seg1_idx,
skip_radar);
if (!channel) {
channel = dfs_downgrade_bandwidth(iface, &secondary_channel,
&oper_centr_freq_seg0_idx,
&oper_centr_freq_seg1_idx,
&skip_radar);
if (!channel) {
wpa_printf(MSG_ERROR, "No valid channel available");
return err;
}
}
wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
channel->chan);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
"freq=%d chan=%d sec_chan=%d", channel->freq,
channel->chan, secondary_channel);
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
hostapd_set_oper_centr_freq_seg0_idx(iface->conf,
oper_centr_freq_seg0_idx);
hostapd_set_oper_centr_freq_seg1_idx(iface->conf,
oper_centr_freq_seg1_idx);
err = 0;
hostapd_setup_interface_complete(iface, err);
return err;
}
static int hostapd_dfs_start_channel_switch(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int secondary_channel;
u8 oper_centr_freq_seg0_idx;
u8 oper_centr_freq_seg1_idx;
u8 new_vht_oper_chwidth;
int skip_radar = 1;
struct csa_settings csa_settings;
unsigned int i;
int err = 1;
struct hostapd_hw_modes *cmode = iface->current_mode;
u8 current_vht_oper_chwidth = iface->conf->vht_oper_chwidth;
wpa_printf(MSG_DEBUG, "%s called (CAC active: %s, CSA active: %s)",
__func__, iface->cac_started ? "yes" : "no",
hostapd_csa_in_progress(iface) ? "yes" : "no");
/* Check if CSA in progress */
if (hostapd_csa_in_progress(iface))
return 0;
/* Check if active CAC */
if (iface->cac_started)
return hostapd_dfs_start_channel_switch_cac(iface);
/*
* Allow selection of DFS channel in ETSI to comply with
* uniform spreading.
*/
if (iface->dfs_domain == HOSTAPD_DFS_REGION_ETSI)
skip_radar = 0;
/* Perform channel switch/CSA */
channel = dfs_get_valid_channel(iface, &secondary_channel,
&oper_centr_freq_seg0_idx,
&oper_centr_freq_seg1_idx,
skip_radar);
if (!channel) {
/*
* If there is no channel to switch immediately to, check if
* there is another channel where we can switch even if it
* requires to perform a CAC first.
*/
skip_radar = 0;
channel = dfs_downgrade_bandwidth(iface, &secondary_channel,
&oper_centr_freq_seg0_idx,
&oper_centr_freq_seg1_idx,
&skip_radar);
if (!channel)
return err;
if (!skip_radar) {
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
hostapd_set_oper_centr_freq_seg0_idx(
iface->conf, oper_centr_freq_seg0_idx);
hostapd_set_oper_centr_freq_seg1_idx(
iface->conf, oper_centr_freq_seg1_idx);
hostapd_disable_iface(iface);
hostapd_enable_iface(iface);
return 0;
}
}
wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
channel->chan);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
"freq=%d chan=%d sec_chan=%d", channel->freq,
channel->chan, secondary_channel);
new_vht_oper_chwidth = iface->conf->vht_oper_chwidth;
iface->conf->vht_oper_chwidth = current_vht_oper_chwidth;
/* Setup CSA request */
os_memset(&csa_settings, 0, sizeof(csa_settings));
csa_settings.cs_count = 5;
csa_settings.block_tx = 1;
err = hostapd_set_freq_params(&csa_settings.freq_params,
iface->conf->hw_mode,
channel->freq,
channel->chan,
iface->conf->enable_edmg,
iface->conf->edmg_channel,
iface->conf->ieee80211n,
iface->conf->ieee80211ac,
iface->conf->ieee80211ax,
secondary_channel,
new_vht_oper_chwidth,
oper_centr_freq_seg0_idx,
oper_centr_freq_seg1_idx,
cmode->vht_capab,
&cmode->he_capab[IEEE80211_MODE_AP]);
if (err) {
wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
hostapd_disable_iface(iface);
return err;
}
for (i = 0; i < iface->num_bss; i++) {
err = hostapd_switch_channel(iface->bss[i], &csa_settings);
if (err)
break;
}
if (err) {
wpa_printf(MSG_WARNING, "DFS failed to schedule CSA (%d) - trying fallback",
err);
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
iface->conf->vht_oper_chwidth = new_vht_oper_chwidth;
hostapd_set_oper_centr_freq_seg0_idx(iface->conf,
oper_centr_freq_seg0_idx);
hostapd_set_oper_centr_freq_seg1_idx(iface->conf,
oper_centr_freq_seg1_idx);
hostapd_disable_iface(iface);
hostapd_enable_iface(iface);
return 0;
}
/* Channel configuration will be updated once CSA completes and
* ch_switch_notify event is received */
wpa_printf(MSG_DEBUG, "DFS waiting channel switch event");
return 0;
}
int hostapd_dfs_radar_detected(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
int res;
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_RADAR_DETECTED
"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
/* Proceed only if DFS is not offloaded to the driver */
if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
return 0;
if (!iface->conf->ieee80211h)
return 0;
/* mark radar frequency as invalid */
res = set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
cf1, cf2, HOSTAPD_CHAN_DFS_UNAVAILABLE);
if (!res)
return 0;
/* Skip if reported radar event not overlapped our channels */
res = dfs_are_channels_overlapped(iface, freq, chan_width, cf1, cf2);
if (!res)
return 0;
/* radar detected while operating, switch the channel. */
res = hostapd_dfs_start_channel_switch(iface);
return res;
}
int hostapd_dfs_nop_finished(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NOP_FINISHED
"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
/* Proceed only if DFS is not offloaded to the driver */
if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
return 0;
/* TODO add correct implementation here */
set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
cf1, cf2, HOSTAPD_CHAN_DFS_USABLE);
/* Handle cases where all channels were initially unavailable */
if (iface->state == HAPD_IFACE_DFS && !iface->cac_started)
hostapd_handle_dfs(iface);
return 0;
}
int hostapd_is_dfs_required(struct hostapd_iface *iface)
{
int n_chans, n_chans1, start_chan_idx, start_chan_idx1, res;
if (!iface->conf->ieee80211h || !iface->current_mode ||
iface->current_mode->mode != HOSTAPD_MODE_IEEE80211A)
return 0;
/* Get start (first) channel for current configuration */
start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
if (start_chan_idx == -1)
return -1;
/* Get number of used channels, depend on width */
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Check if any of configured channels require DFS */
res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
if (res)
return res;
if (start_chan_idx1 >= 0 && n_chans1 > 0)
res = dfs_check_chans_radar(iface, start_chan_idx1, n_chans1);
return res;
}
int hostapd_dfs_start_cac(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
/* This is called when the driver indicates that an offloaded DFS has
* started CAC. */
hostapd_set_state(iface, HAPD_IFACE_DFS);
/* TODO: How to check CAC time for ETSI weather channels? */
iface->dfs_cac_ms = 60000;
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
"freq=%d chan=%d chan_offset=%d width=%d seg0=%d "
"seg1=%d cac_time=%ds",
freq, (freq - 5000) / 5, chan_offset, chan_width, cf1, cf2,
iface->dfs_cac_ms / 1000);
iface->cac_started = 1;
os_get_reltime(&iface->dfs_cac_start);
return 0;
}
/*
* Main DFS handler for offloaded case.
* 2 - continue channel/AP setup for non-DFS channel
* 1 - continue channel/AP setup for DFS channel
* 0 - channel/AP setup will be continued after CAC
* -1 - hit critical error
*/
int hostapd_handle_dfs_offload(struct hostapd_iface *iface)
{
wpa_printf(MSG_DEBUG, "%s: iface->cac_started: %d",
__func__, iface->cac_started);
/*
* If DFS has already been started, then we are being called from a
* callback to continue AP/channel setup. Reset the CAC start flag and
* return.
*/
if (iface->cac_started) {
wpa_printf(MSG_DEBUG, "%s: iface->cac_started: %d",
__func__, iface->cac_started);
iface->cac_started = 0;
return 1;
}
if (ieee80211_is_dfs(iface->freq, iface->hw_features,
iface->num_hw_features)) {
wpa_printf(MSG_DEBUG, "%s: freq %d MHz requires DFS",
__func__, iface->freq);
return 0;
}
wpa_printf(MSG_DEBUG,
"%s: freq %d MHz does not require DFS. Continue channel/AP setup",
__func__, iface->freq);
return 2;
}
int hostapd_is_dfs_overlap(struct hostapd_iface *iface, enum chan_width width,
int center_freq)
{
struct hostapd_channel_data *chan;
struct hostapd_hw_modes *mode = iface->current_mode;
int half_width;
int res = 0;
int i;
if (!iface->conf->ieee80211h || !mode ||
mode->mode != HOSTAPD_MODE_IEEE80211A)
return 0;
switch (width) {
case CHAN_WIDTH_20_NOHT:
case CHAN_WIDTH_20:
half_width = 10;
break;
case CHAN_WIDTH_40:
half_width = 20;
break;
case CHAN_WIDTH_80:
case CHAN_WIDTH_80P80:
half_width = 40;
break;
case CHAN_WIDTH_160:
half_width = 80;
break;
default:
wpa_printf(MSG_WARNING, "DFS chanwidth %d not supported",
width);
return 0;
}
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
if (!(chan->flag & HOSTAPD_CHAN_RADAR))
continue;
if (center_freq - chan->freq < half_width &&
chan->freq - center_freq < half_width)
res++;
}
wpa_printf(MSG_DEBUG, "DFS: (%d, %d): in range: %s",
center_freq - half_width, center_freq + half_width,
res ? "yes" : "no");
return res;
}
Reference in a new issue View git blame Copy permalink