jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/tests/hwsim/test_ap_eap.py
Jouni Malinen 8e416cecdb tests: Make key-lifetime-in-memory more robust for GTK check 
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only
after having sent out CTRL-EVENT-CONNECTED. As such, there was a race
condition on the test case reading the wpa_supplicant process memory
after the connection. This was unlikely to occur due to the one second
sleep, but even with that, it would be at least theorically possible to
hit this race under heavy load (e.g., when using large number of VMs to
run parallel testing). Avoid this by running a PING command to make sure
wpa_supplicant has returned to eloop before reading the process memory.
This should make it less likely to report false positives on GTK being
found in memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 17:23:47 +02:00

4517 lines
207 KiB
Python
Raw Blame History

# -*- coding: utf-8 -*-
# WPA2-Enterprise tests
# Copyright (c) 2013-2015, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import base64
import binascii
import time
import subprocess
import logging
logger = logging.getLogger()
import os
import socket
import SocketServer
import hwsim_utils
import hostapd
from utils import HwsimSkip, alloc_fail, fail_test, skip_with_fips, wait_fail_trigger
from wpasupplicant import WpaSupplicant
from test_ap_psk import check_mib, find_wpas_process, read_process_memory, verify_not_present, get_key_locations, set_test_assoc_ie
try:
import OpenSSL
openssl_imported = True
except ImportError:
openssl_imported = False
def check_hlr_auc_gw_support():
if not os.path.exists("/tmp/hlr_auc_gw.sock"):
raise HwsimSkip("No hlr_auc_gw available")
def check_eap_capa(dev, method):
res = dev.get_capability("eap")
if method not in res:
raise HwsimSkip("EAP method %s not supported in the build" % method)
def check_subject_match_support(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("subject_match not supported with this TLS library: " + tls)
def check_altsubject_match_support(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("altsubject_match not supported with this TLS library: " + tls)
def check_domain_match(dev):
tls = dev.request("GET tls_library")
if tls.startswith("internal"):
raise HwsimSkip("domain_match not supported with this TLS library: " + tls)
def check_domain_suffix_match(dev):
tls = dev.request("GET tls_library")
if tls.startswith("internal"):
raise HwsimSkip("domain_suffix_match not supported with this TLS library: " + tls)
def check_domain_match_full(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("domain_suffix_match requires full match with this TLS library: " + tls)
def check_cert_probe_support(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL") and not tls.startswith("internal"):
raise HwsimSkip("Certificate probing not supported with this TLS library: " + tls)
def check_ext_cert_check_support(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("ext_cert_check not supported with this TLS library: " + tls)
def check_ocsp_support(dev):
tls = dev.request("GET tls_library")
if tls.startswith("internal"):
raise HwsimSkip("OCSP not supported with this TLS library: " + tls)
#if "BoringSSL" in tls:
# raise HwsimSkip("OCSP not supported with this TLS library: " + tls)
def check_pkcs12_support(dev):
tls = dev.request("GET tls_library")
#if tls.startswith("internal"):
# raise HwsimSkip("PKCS#12 not supported with this TLS library: " + tls)
def check_dh_dsa_support(dev):
tls = dev.request("GET tls_library")
if tls.startswith("internal"):
raise HwsimSkip("DH DSA not supported with this TLS library: " + tls)
def read_pem(fname):
with open(fname, "r") as f:
lines = f.readlines()
copy = False
cert = ""
for l in lines:
if "-----END" in l:
break
if copy:
cert = cert + l
if "-----BEGIN" in l:
copy = True
return base64.b64decode(cert)
def eap_connect(dev, ap, method, identity,
sha256=False, expect_failure=False, local_error_report=False,
maybe_local_error=False, **kwargs):
hapd = hostapd.Hostapd(ap['ifname'])
id = dev.connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap=method, identity=identity,
wait_connect=False, scan_freq="2412", ieee80211w="1",
**kwargs)
eap_check_auth(dev, method, True, sha256=sha256,
expect_failure=expect_failure,
local_error_report=local_error_report,
maybe_local_error=maybe_local_error)
if expect_failure:
return id
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if ev is None:
raise Exception("No connection event received from hostapd")
return id
def eap_check_auth(dev, method, initial, rsn=True, sha256=False,
expect_failure=False, local_error_report=False,
maybe_local_error=False):
ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev.wait_event(["CTRL-EVENT-EAP-METHOD",
"CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "CTRL-EVENT-EAP-FAILURE" in ev:
if maybe_local_error:
return
raise Exception("Could not select EAP method")
if method not in ev:
raise Exception("Unexpected EAP method")
if expect_failure:
ev = dev.wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("EAP failure timed out")
ev = dev.wait_disconnected(timeout=10)
if maybe_local_error and "locally_generated=1" in ev:
return
if not local_error_report:
if "reason=23" not in ev:
raise Exception("Proper reason code for disconnection not reported")
return
ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
if initial:
ev = dev.wait_event(["CTRL-EVENT-CONNECTED"], timeout=10)
else:
ev = dev.wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Association with the AP timed out")
status = dev.get_status()
if status["wpa_state"] != "COMPLETED":
raise Exception("Connection not completed")
if status["suppPortStatus"] != "Authorized":
raise Exception("Port not authorized")
if method not in status["selectedMethod"]:
raise Exception("Incorrect EAP method status")
if sha256:
e = "WPA2-EAP-SHA256"
elif rsn:
e = "WPA2/IEEE 802.1X/EAP"
else:
e = "WPA/IEEE 802.1X/EAP"
if status["key_mgmt"] != e:
raise Exception("Unexpected key_mgmt status: " + status["key_mgmt"])
return status
def eap_reauth(dev, method, rsn=True, sha256=False, expect_failure=False):
dev.request("REAUTHENTICATE")
return eap_check_auth(dev, method, False, rsn=rsn, sha256=sha256,
expect_failure=expect_failure)
def test_ap_wpa2_eap_sim(dev, apdev):
"""WPA2-Enterprise connection using EAP-SIM"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "SIM")
eap_connect(dev[1], apdev[0], "SIM", "1232010000000001",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
eap_connect(dev[2], apdev[0], "SIM", "1232010000000002",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Invalid GSM-Milenage key")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(2)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(3)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(4)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Missing key configuration")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
expect_failure=True)
def test_ap_wpa2_eap_sim_sql(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-SIM (SQL)"""
check_hlr_auc_gw_support()
try:
import sqlite3
except ImportError:
raise HwsimSkip("No sqlite3 module available")
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
logger.info("SIM fast re-authentication")
eap_reauth(dev[0], "SIM")
logger.info("SIM full auth with pseudonym")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='1232010000000000'")
eap_reauth(dev[0], "SIM")
logger.info("SIM full auth with permanent identity")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='1232010000000000'")
cur.execute("DELETE FROM pseudonyms WHERE permanent='1232010000000000'")
eap_reauth(dev[0], "SIM")
logger.info("SIM reauth with mismatching MK")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET mk='0000000000000000000000000000000000000000' WHERE permanent='1232010000000000'")
eap_reauth(dev[0], "SIM", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='1232010000000000'")
eap_reauth(dev[0], "SIM")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='1232010000000000'")
logger.info("SIM reauth with mismatching counter")
eap_reauth(dev[0], "SIM")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='1232010000000000'")
logger.info("SIM reauth with max reauth count reached")
eap_reauth(dev[0], "SIM")
def test_ap_wpa2_eap_sim_config(dev, apdev):
"""EAP-SIM configuration options"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM",
identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="sim_min_num_chal=1",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 18 (SIM)"], timeout=10)
if ev is None:
raise Exception("No EAP error message seen")
dev[0].request("REMOVE_NETWORK all")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM",
identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="sim_min_num_chal=4",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 18 (SIM)"], timeout=10)
if ev is None:
raise Exception("No EAP error message seen (2)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="sim_min_num_chal=2")
eap_connect(dev[1], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
anonymous_identity="345678")
def test_ap_wpa2_eap_sim_ext(dev, apdev):
"""WPA2-Enterprise connection using EAP-SIM and external GSM auth"""
try:
_test_ap_wpa2_eap_sim_ext(dev, apdev)
finally:
dev[0].request("SET external_sim 0")
def _test_ap_wpa2_eap_sim_ext(dev, apdev):
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("SET external_sim 1")
id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
identity="1232010000000000",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=15)
if ev is None:
raise Exception("Network connected timed out")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# IK:CK:RES
resp = "00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344"
# This will fail during processing, but the ctrl_iface command succeeds
dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:" + resp)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:q"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:34"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:q"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:00112233"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "GSM-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during GSM auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:00112233:q"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
def test_ap_wpa2_eap_sim_oom(dev, apdev):
"""EAP-SIM and OOM"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tests = [ (1, "milenage_f2345"),
(2, "milenage_f2345"),
(3, "milenage_f2345"),
(4, "milenage_f2345"),
(5, "milenage_f2345"),
(6, "milenage_f2345"),
(7, "milenage_f2345"),
(8, "milenage_f2345"),
(9, "milenage_f2345"),
(10, "milenage_f2345"),
(11, "milenage_f2345"),
(12, "milenage_f2345") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM",
identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
if ev is None:
raise Exception("EAP method not selected")
dev[0].wait_disconnected()
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-AKA"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "AKA")
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a",
expect_failure=True)
logger.info("Invalid Milenage key(2)")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(3)")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(4)")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:00000000012q",
expect_failure=True)
logger.info("Invalid Milenage key(5)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581q000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(6)")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581q000000000123",
expect_failure=True)
logger.info("Missing key configuration")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
expect_failure=True)
def test_ap_wpa2_eap_aka_sql(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-AKA (SQL)"""
check_hlr_auc_gw_support()
try:
import sqlite3
except ImportError:
raise HwsimSkip("No sqlite3 module available")
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
logger.info("AKA fast re-authentication")
eap_reauth(dev[0], "AKA")
logger.info("AKA full auth with pseudonym")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='0232010000000000'")
eap_reauth(dev[0], "AKA")
logger.info("AKA full auth with permanent identity")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='0232010000000000'")
cur.execute("DELETE FROM pseudonyms WHERE permanent='0232010000000000'")
eap_reauth(dev[0], "AKA")
logger.info("AKA reauth with mismatching MK")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET mk='0000000000000000000000000000000000000000' WHERE permanent='0232010000000000'")
eap_reauth(dev[0], "AKA", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='0232010000000000'")
eap_reauth(dev[0], "AKA")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='0232010000000000'")
logger.info("AKA reauth with mismatching counter")
eap_reauth(dev[0], "AKA")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='0232010000000000'")
logger.info("AKA reauth with max reauth count reached")
eap_reauth(dev[0], "AKA")
def test_ap_wpa2_eap_aka_config(dev, apdev):
"""EAP-AKA configuration options"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
anonymous_identity="2345678")
def test_ap_wpa2_eap_aka_ext(dev, apdev):
"""WPA2-Enterprise connection using EAP-AKA and external UMTS auth"""
try:
_test_ap_wpa2_eap_aka_ext(dev, apdev)
finally:
dev[0].request("SET external_sim 0")
def _test_ap_wpa2_eap_aka_ext(dev, apdev):
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("SET external_sim 1")
id = dev[0].connect("test-wpa2-eap", eap="AKA", key_mgmt="WPA-EAP",
identity="0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=15)
if ev is None:
raise Exception("Network connected timed out")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "UMTS-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# IK:CK:RES
resp = "00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344"
# This will fail during processing, but the ctrl_iface command succeeds
dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].dump_monitor()
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "UMTS-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during UMTS auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTS:112233445566778899aabbccddee"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "UMTS-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during UMTS auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTS:12"):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].dump_monitor()
tests = [ ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344",
":UMTS-AUTH:34",
":UMTS-AUTH:00112233445566778899aabbccddeeff.00112233445566778899aabbccddeeff:0011223344",
":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddee:0011223344",
":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff.0011223344",
":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff0011223344",
":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:001122334q" ]
for t in tests:
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
if ev is None:
raise Exception("Wait for external SIM processing request timed out")
p = ev.split(':', 2)
if p[1] != "UMTS-AUTH":
raise Exception("Unexpected CTRL-REQ-SIM type")
rid = p[0].split('-')[3]
# This will fail during UMTS auth validation
if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + t):
raise Exception("CTRL-RSP-SIM failed")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
dev[0].dump_monitor()
def test_ap_wpa2_eap_aka_prime(dev, apdev):
"""WPA2-Enterprise connection using EAP-AKA'"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "AKA'")
logger.info("EAP-AKA' bidding protection when EAP-AKA enabled as well")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="AKA' AKA",
identity="6555444333222111@both",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123",
wait_connect=False, scan_freq="2412")
dev[1].wait_connected(timeout=15)
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="ff22250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123",
expect_failure=True)
def test_ap_wpa2_eap_aka_prime_sql(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-AKA' (SQL)"""
check_hlr_auc_gw_support()
try:
import sqlite3
except ImportError:
raise HwsimSkip("No sqlite3 module available")
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
logger.info("AKA' fast re-authentication")
eap_reauth(dev[0], "AKA'")
logger.info("AKA' full auth with pseudonym")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='6555444333222111'")
eap_reauth(dev[0], "AKA'")
logger.info("AKA' full auth with permanent identity")
with con:
cur = con.cursor()
cur.execute("DELETE FROM reauth WHERE permanent='6555444333222111'")
cur.execute("DELETE FROM pseudonyms WHERE permanent='6555444333222111'")
eap_reauth(dev[0], "AKA'")
logger.info("AKA' reauth with mismatching k_aut")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET k_aut='0000000000000000000000000000000000000000000000000000000000000000' WHERE permanent='6555444333222111'")
eap_reauth(dev[0], "AKA'", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='6555444333222111'")
eap_reauth(dev[0], "AKA'")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='10' WHERE permanent='6555444333222111'")
logger.info("AKA' reauth with mismatching counter")
eap_reauth(dev[0], "AKA'")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
with con:
cur = con.cursor()
cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='6555444333222111'")
logger.info("AKA' reauth with max reauth count reached")
eap_reauth(dev[0], "AKA'")
def test_ap_wpa2_eap_ttls_pap(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-1"),
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-1") ])
def test_ap_wpa2_eap_ttls_pap_subject_match(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and (alt)subject_match"""
check_subject_match_support(dev[0])
check_altsubject_match_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
subject_match="/C=FI/O=w1.fi/CN=server.w1.fi",
altsubject_match="EMAIL:noone@example.com;DNS:server.w1.fi;URI:http://example.com/")
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_pap_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP - incorrect password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
eap_connect(dev[1], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
def test_ap_wpa2_eap_ttls_chap(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_chap_altsubject_match(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP"""
skip_with_fips(dev[0])
check_altsubject_match_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP",
altsubject_match="EMAIL:noone@example.com;URI:http://example.com/;DNS:server.w1.fi")
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_chap_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "chap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP",
expect_failure=True)
eap_connect(dev[1], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP",
expect_failure=True)
def test_ap_wpa2_eap_ttls_mschap(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAP"""
skip_with_fips(dev[0])
check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
domain_suffix_match="server.w1.fi")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
fragment_size="200")
def test_ap_wpa2_eap_ttls_mschap_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAP - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
eap_connect(dev[1], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
eap_connect(dev[2], apdev[0], "TTLS", "no such user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
def test_ap_wpa2_eap_ttls_mschapv2(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2"""
check_domain_suffix_match(dev[0])
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="server.w1.fi")
hwsim_utils.test_connectivity(dev[0], hapd)
sta1 = hapd.get_sta(dev[0].p2p_interface_addr())
eapol1 = hapd.get_sta(dev[0].p2p_interface_addr(), info="eapol")
eap_reauth(dev[0], "TTLS")
sta2 = hapd.get_sta(dev[0].p2p_interface_addr())
eapol2 = hapd.get_sta(dev[0].p2p_interface_addr(), info="eapol")
if int(sta2['dot1xAuthEapolFramesRx']) <= int(sta1['dot1xAuthEapolFramesRx']):
raise Exception("dot1xAuthEapolFramesRx did not increase")
if int(eapol2['authAuthEapStartsWhileAuthenticated']) < 1:
raise Exception("authAuthEapStartsWhileAuthenticated did not increase")
if int(eapol2['backendAuthSuccesses']) <= int(eapol1['backendAuthSuccesses']):
raise Exception("backendAuthSuccesses did not increase")
logger.info("Password as hash value")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_ttls_mschapv2_suffix_match(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2"""
check_domain_match_full(dev[0])
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="w1.fi")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_mschapv2_domain_match(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 (domain_match)"""
check_domain_match(dev[0])
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_match="Server.w1.fi")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_mschapv2_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password1",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
eap_connect(dev[1], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_ttls_mschapv2_utf8(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 and UTF-8 password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
eap_connect(dev[0], apdev[0], "TTLS", "utf8-user-hash",
anonymous_identity="ttls", password="secret-åäö-€-password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
eap_connect(dev[1], apdev[0], "TTLS", "utf8-user",
anonymous_identity="ttls",
password_hex="hash:bd5844fad2489992da7fe8c5a01559cf",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
for p in [ "80", "41c041e04141e041", 257*"41" ]:
dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="TTLS", identity="utf8-user-hash",
anonymous_identity="ttls", password_hex=p,
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
wait_connect=False, scan_freq="2412")
ev = dev[2].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=1)
if ev is None:
raise Exception("No failure reported")
dev[2].request("REMOVE_NETWORK all")
dev[2].wait_disconnected()
def test_ap_wpa2_eap_ttls_eap_gtc(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_eap_gtc_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - incorrect password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_gtc_no_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - no password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_gtc_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - server OOM"""
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(hapd, 1, "eap_gtc_init"):
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(hapd, 1, "eap_gtc_buildReq"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having reached
# the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
def test_ap_wpa2_eap_ttls_eap_md5(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_ttls_eap_md5_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - incorrect password"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_md5_no_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - no password"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_md5_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - server OOM"""
check_eap_capa(dev[0], "MD5")
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(hapd, 1, "eap_md5_init"):
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(hapd, 1, "eap_md5_buildReq"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having reached
# the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
def test_ap_wpa2_eap_ttls_eap_mschapv2(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password1",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_mschapv2_no_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2 - no password"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_mschapv2_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2 - server OOM"""
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(hapd, 1, "eap_mschapv2_init"):
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(hapd, 1, "eap_mschapv2_build_challenge"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having reached
# the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(hapd, 1, "eap_mschapv2_build_success_req"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having reached
# the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(hapd, 1, "eap_mschapv2_build_failure_req"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having reached
# the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_ttls_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-AKA"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "0232010000000000",
anonymous_identity="0232010000000000@ttls",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
ca_cert="auth_serv/ca.pem", phase2="autheap=AKA")
def test_ap_wpa2_eap_peap_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-AKA"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "0232010000000000",
anonymous_identity="0232010000000000@peap",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
ca_cert="auth_serv/ca.pem", phase2="auth=AKA")
def test_ap_wpa2_eap_fast_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/EAP-AKA"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "FAST", "0232010000000000",
anonymous_identity="0232010000000000@fast",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
phase1="fast_provisioning=2",
pac_file="blob://fast_pac_auth_aka",
ca_cert="auth_serv/ca.pem", phase2="auth=AKA")
def test_ap_wpa2_eap_peap_eap_mschapv2(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
fragment_size="200")
logger.info("Password as hash value")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password1",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_peap_eap_mschapv2_domain(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2 with domain"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "DOMAIN\user3",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP")
def test_ap_wpa2_eap_peap_eap_mschapv2_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2 - incorrect password"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_peap_crypto_binding(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and crypto binding"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=2",
phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP")
eap_connect(dev[1], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=1",
phase2="auth=MSCHAPV2")
eap_connect(dev[2], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=0",
phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_peap_crypto_binding_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and crypto binding with server OOM"""
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(hapd, 1, "eap_mschapv2_getKey"):
eap_connect(dev[0], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=2",
phase2="auth=MSCHAPV2",
expect_failure=True, local_error_report=True)
def test_ap_wpa2_eap_peap_params(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and various parameters"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="peapver=0 peaplabel=1",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[1], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peap_outer_success=1",
phase2="auth=MSCHAPV2")
eap_connect(dev[2], apdev[0], "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peap_outer_success=2",
phase2="auth=MSCHAPV2")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PEAP",
identity="user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="peapver=1 peaplabel=1",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
if ev is None:
raise Exception("No EAP success seen")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected connection")
def test_ap_wpa2_eap_peap_eap_tls(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "cert user",
ca_cert="auth_serv/ca.pem", phase2="auth=TLS",
ca_cert2="auth_serv/ca.pem",
client_cert2="auth_serv/user.pem",
private_key2="auth_serv/user.key")
eap_reauth(dev[0], "PEAP")
def test_ap_wpa2_eap_tls(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
eap_reauth(dev[0], "TLS")
def test_eap_tls_pkcs8_pkcs5_v2_des3(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v2 DES3 key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key.pkcs8",
private_key_passwd="whatever")
def test_eap_tls_pkcs8_pkcs5_v15(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v1.5 key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key.pkcs8.pkcs5v15",
private_key_passwd="whatever")
def test_ap_wpa2_eap_tls_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and config blobs"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
cert = read_pem("auth_serv/ca.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
cert = read_pem("auth_serv/user.pem")
if "OK" not in dev[0].request("SET blob usercert " + cert.encode("hex")):
raise Exception("Could not set usercert blob")
key = read_pem("auth_serv/user.rsa-key")
if "OK" not in dev[0].request("SET blob userkey " + key.encode("hex")):
raise Exception("Could not set cacert blob")
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert",
client_cert="blob://usercert",
private_key="blob://userkey")
def test_ap_wpa2_eap_tls_pkcs12(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12"""
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-PASSPHRASE"])
if ev is None:
raise Exception("Request for private key passphrase timed out")
id = ev.split(':')[0].split('-')[-1]
dev[0].request("CTRL-RSP-PASSPHRASE-" + id + ":whatever")
dev[0].wait_connected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
# Run this twice to verify certificate chain handling with OpenSSL. Use two
# different files to cover both cases of the extra certificate being the
# one that signed the client certificate and it being unrelated to the
# client certificate.
for pkcs12 in "auth_serv/user2.pkcs12", "auth_serv/user3.pkcs12":
for i in range(2):
eap_connect(dev[0], apdev[0], "TLS", "tls user",
ca_cert="auth_serv/ca.pem",
private_key=pkcs12,
private_key_passwd="whatever")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_tls_pkcs12_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12 from configuration blob"""
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
cert = read_pem("auth_serv/ca.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
with open("auth_serv/user.pkcs12", "rb") as f:
if "OK" not in dev[0].request("SET blob pkcs12 " + f.read().encode("hex")):
raise Exception("Could not set pkcs12 blob")
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert",
private_key="blob://pkcs12",
private_key_passwd="whatever")
def test_ap_wpa2_eap_tls_neg_incorrect_trust_root(dev, apdev):
"""WPA2-Enterprise negative test - incorrect trust root"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
cert = read_pem("auth_serv/ca-incorrect.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="blob://cacert",
wait_connect=False, scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca-incorrect.pem",
wait_connect=False, scan_freq="2412")
for dev in (dev[0], dev[1]):
ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev.wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "TTLS" not in ev:
raise Exception("Unexpected EAP method")
ev = dev.wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR",
"CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev:
raise Exception("TLS certificate error not reported")
ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(2) timed out")
if "CTRL-EVENT-EAP-FAILURE" not in ev:
raise Exception("EAP failure not reported")
ev = dev.wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(3) timed out")
if "CTRL-EVENT-DISCONNECTED" not in ev:
raise Exception("Disconnection not reported")
ev = dev.wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("Network block disabling not reported")
def test_ap_wpa2_eap_tls_diff_ca_trust(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
ca_cert="auth_serv/ca.pem",
wait_connect=True, scan_freq="2412")
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
ca_cert="auth_serv/ca-incorrect.pem",
only_add_network=True, scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
dev[0].dump_monitor()
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15)
if ev is None:
raise Exception("EAP-TTLS not re-started")
ev = dev[0].wait_disconnected(timeout=15)
if "reason=23" not in ev:
raise Exception("Proper reason code for disconnection not reported")
def test_ap_wpa2_eap_tls_diff_ca_trust2(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
wait_connect=True, scan_freq="2412")
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
ca_cert="auth_serv/ca-incorrect.pem",
only_add_network=True, scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
dev[0].dump_monitor()
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15)
if ev is None:
raise Exception("EAP-TTLS not re-started")
ev = dev[0].wait_disconnected(timeout=15)
if "reason=23" not in ev:
raise Exception("Proper reason code for disconnection not reported")
def test_ap_wpa2_eap_tls_diff_ca_trust3(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
ca_cert="auth_serv/ca.pem",
wait_connect=True, scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
dev[0].dump_monitor()
dev[0].set_network_quoted(id, "ca_cert", "auth_serv/ca-incorrect.pem")
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15)
if ev is None:
raise Exception("EAP-TTLS not re-started")
ev = dev[0].wait_disconnected(timeout=15)
if "reason=23" not in ev:
raise Exception("Proper reason code for disconnection not reported")
def test_ap_wpa2_eap_tls_neg_suffix_match(dev, apdev):
"""WPA2-Enterprise negative test - domain suffix mismatch"""
check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem",
domain_suffix_match="incorrect.example.com",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "TTLS" not in ev:
raise Exception("Unexpected EAP method")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR",
"CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev:
raise Exception("TLS certificate error not reported")
if "Domain suffix mismatch" not in ev:
raise Exception("Domain suffix mismatch not reported")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(2) timed out")
if "CTRL-EVENT-EAP-FAILURE" not in ev:
raise Exception("EAP failure not reported")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(3) timed out")
if "CTRL-EVENT-DISCONNECTED" not in ev:
raise Exception("Disconnection not reported")
ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("Network block disabling not reported")
def test_ap_wpa2_eap_tls_neg_domain_match(dev, apdev):
"""WPA2-Enterprise negative test - domain mismatch"""
check_domain_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem",
domain_match="w1.fi",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "TTLS" not in ev:
raise Exception("Unexpected EAP method")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR",
"CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev:
raise Exception("TLS certificate error not reported")
if "Domain mismatch" not in ev:
raise Exception("Domain mismatch not reported")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(2) timed out")
if "CTRL-EVENT-EAP-FAILURE" not in ev:
raise Exception("EAP failure not reported")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(3) timed out")
if "CTRL-EVENT-DISCONNECTED" not in ev:
raise Exception("Disconnection not reported")
ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("Network block disabling not reported")
def test_ap_wpa2_eap_tls_neg_subject_match(dev, apdev):
"""WPA2-Enterprise negative test - subject mismatch"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem",
subject_match="/C=FI/O=w1.fi/CN=example.com",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD",
"EAP: Failed to initialize EAP method"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "EAP: Failed to initialize EAP method" in ev:
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
raise Exception("Failed to select EAP method")
logger.info("subject_match not supported - connection failed, so test succeeded")
return
if "TTLS" not in ev:
raise Exception("Unexpected EAP method")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR",
"CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev:
raise Exception("TLS certificate error not reported")
if "Subject mismatch" not in ev:
raise Exception("Subject mismatch not reported")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(2) timed out")
if "CTRL-EVENT-EAP-FAILURE" not in ev:
raise Exception("EAP failure not reported")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(3) timed out")
if "CTRL-EVENT-DISCONNECTED" not in ev:
raise Exception("Disconnection not reported")
ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("Network block disabling not reported")
def test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev):
"""WPA2-Enterprise negative test - altsubject mismatch"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tests = [ "incorrect.example.com",
"DNS:incorrect.example.com",
"DNS:w1.fi",
"DNS:erver.w1.fi" ]
for match in tests:
_test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev, match)
def _test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev, match):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem",
altsubject_match=match,
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD",
"EAP: Failed to initialize EAP method"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
if "EAP: Failed to initialize EAP method" in ev:
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
raise Exception("Failed to select EAP method")
logger.info("altsubject_match not supported - connection failed, so test succeeded")
return
if "TTLS" not in ev:
raise Exception("Unexpected EAP method")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR",
"CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev:
raise Exception("TLS certificate error not reported")
if "AltSubject mismatch" not in ev:
raise Exception("altsubject mismatch not reported")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS",
"CTRL-EVENT-EAP-FAILURE",
"CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(2) timed out")
if "CTRL-EVENT-EAP-FAILURE" not in ev:
raise Exception("EAP failure not reported")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("EAP result(3) timed out")
if "CTRL-EVENT-DISCONNECTED" not in ev:
raise Exception("Disconnection not reported")
ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10)
if ev is None:
raise Exception("Network block disabling not reported")
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_unauth_tls(dev, apdev):
"""WPA2-Enterprise connection using UNAUTH-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "UNAUTH-TLS", "unauth-tls",
ca_cert="auth_serv/ca.pem")
eap_reauth(dev[0], "UNAUTH-TLS")
def test_ap_wpa2_eap_ttls_server_cert_hash(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and server certificate hash"""
check_cert_probe_support(dev[0])
skip_with_fips(dev[0])
srv_cert_hash = "e75bd454c7b02d312e5006d75067c28ffa5baea422effeb2bbd572179cd000ca"
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="probe", ca_cert="probe://",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PEER-CERT depth=0"], timeout=10)
if ev is None:
raise Exception("No peer server certificate event seen")
if "hash=" + srv_cert_hash not in ev:
raise Exception("Expected server certificate hash not reported")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "Server certificate chain probe" not in ev:
raise Exception("Server certificate probe not reported")
dev[0].wait_disconnected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"], timeout=10)
if ev is None:
raise Exception("EAP result timed out")
if "Server certificate mismatch" not in ev:
raise Exception("Server certificate mismatch not reported")
dev[0].wait_disconnected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="hash://server/sha256/" + srv_cert_hash,
phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_ttls_server_cert_hash_invalid(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and server certificate hash (invalid config)"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/md5/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a",
wait_connect=False, scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca",
wait_connect=False, scan_freq="2412")
dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6Q",
wait_connect=False, scan_freq="2412")
for i in range(0, 3):
ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 21 (TTLS)"], timeout=5)
if ev is None:
raise Exception("Did not report EAP method initialization failure")
def test_ap_wpa2_eap_pwd(dev, apdev):
"""WPA2-Enterprise connection using EAP-pwd"""
check_eap_capa(dev[0], "PWD")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password")
eap_reauth(dev[0], "PWD")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[1], apdev[0], "PWD",
"pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com",
password="secret password",
fragment_size="90")
logger.info("Negative test with incorrect password")
eap_connect(dev[2], apdev[0], "PWD", "pwd user", password="secret-password",
expect_failure=True, local_error_report=True)
eap_connect(dev[0], apdev[0], "PWD",
"pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com",
password="secret password",
fragment_size="31")
def test_ap_wpa2_eap_pwd_nthash(dev, apdev):
"""WPA2-Enterprise connection using EAP-pwd and NTHash"""
check_eap_capa(dev[0], "PWD")
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PWD", "pwd-hash", password="secret password")
eap_connect(dev[1], apdev[0], "PWD", "pwd-hash",
password_hex="hash:e3718ece8ab74792cbbfffd316d2d19a")
eap_connect(dev[2], apdev[0], "PWD", "pwd user",
password_hex="hash:e3718ece8ab74792cbbfffd316d2d19a",
expect_failure=True, local_error_report=True)
def test_ap_wpa2_eap_pwd_groups(dev, apdev):
"""WPA2-Enterprise connection using various EAP-pwd groups"""
check_eap_capa(dev[0], "PWD")
tls = dev[0].request("GET tls_library")
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" }
groups = [ 19, 20, 21, 25, 26 ]
if tls.startswith("OpenSSL") and "build=OpenSSL 1.0.2" in tls and "run=OpenSSL 1.0.2" in tls:
logger.info("Add Brainpool EC groups since OpenSSL is new enough")
groups += [ 27, 28, 29, 30 ]
for i in groups:
logger.info("Group %d" % i)
params['pwd_group'] = str(i)
hostapd.add_ap(apdev[0]['ifname'], params)
try:
eap_connect(dev[0], apdev[0], "PWD", "pwd user",
password="secret password")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
dev[0].dump_monitor()
except:
if "BoringSSL" in tls and i in [ 25 ]:
logger.info("Ignore connection failure with group %d with BoringSSL" % i)
dev[0].request("DISCONNECT")
time.sleep(0.1)
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
continue
raise
def test_ap_wpa2_eap_pwd_invalid_group(dev, apdev):
"""WPA2-Enterprise connection using invalid EAP-pwd group"""
check_eap_capa(dev[0], "PWD")
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" }
params['pwd_group'] = "0"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PWD",
identity="pwd user", password="secret password",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_pwd_as_frag(dev, apdev):
"""WPA2-Enterprise connection using EAP-pwd with server fragmentation"""
check_eap_capa(dev[0], "PWD")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf",
"pwd_group": "19", "fragment_size": "40" }
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password")
def test_ap_wpa2_eap_gpsk(dev, apdev):
"""WPA2-Enterprise connection using EAP-GPSK"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
id = eap_connect(dev[0], apdev[0], "GPSK", "gpsk user",
password="abcdefghijklmnop0123456789abcdef")
eap_reauth(dev[0], "GPSK")
logger.info("Test forced algorithm selection")
for phase1 in [ "cipher=1", "cipher=2" ]:
dev[0].set_network_quoted(id, "phase1", phase1)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
dev[0].wait_connected(timeout=10)
logger.info("Test failed algorithm negotiation")
dev[0].set_network_quoted(id, "phase1", "cipher=9")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP failure timed out")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "GPSK", "gpsk user",
password="ffcdefghijklmnop0123456789abcdef",
expect_failure=True)
def test_ap_wpa2_eap_sake(dev, apdev):
"""WPA2-Enterprise connection using EAP-SAKE"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "SAKE", "sake user",
password_hex="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef")
eap_reauth(dev[0], "SAKE")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "SAKE", "sake user",
password_hex="ff23456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef",
expect_failure=True)
def test_ap_wpa2_eap_eke(dev, apdev):
"""WPA2-Enterprise connection using EAP-EKE"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
id = eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello")
eap_reauth(dev[0], "EKE")
logger.info("Test forced algorithm selection")
for phase1 in [ "dhgroup=5 encr=1 prf=2 mac=2",
"dhgroup=4 encr=1 prf=2 mac=2",
"dhgroup=3 encr=1 prf=2 mac=2",
"dhgroup=3 encr=1 prf=1 mac=1" ]:
dev[0].set_network_quoted(id, "phase1", phase1)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
dev[0].wait_connected(timeout=10)
logger.info("Test failed algorithm negotiation")
dev[0].set_network_quoted(id, "phase1", "dhgroup=9 encr=9 prf=9 mac=9")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP failure timed out")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello1",
expect_failure=True)
def test_ap_wpa2_eap_eke_serverid_nai(dev, apdev):
"""WPA2-Enterprise connection using EAP-EKE with serverid NAI"""
params = int_eap_server_params()
params['server_id'] = 'example.server@w1.fi'
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello")
def test_ap_wpa2_eap_eke_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-EKE with server OOM"""
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
for count,func in [ (1, "eap_eke_build_commit"),
(2, "eap_eke_build_commit"),
(3, "eap_eke_build_commit"),
(1, "eap_eke_build_confirm"),
(2, "eap_eke_build_confirm"),
(1, "eap_eke_process_commit"),
(2, "eap_eke_process_commit"),
(1, "eap_eke_process_confirm"),
(1, "eap_eke_process_identity"),
(2, "eap_eke_process_identity"),
(3, "eap_eke_process_identity"),
(4, "eap_eke_process_identity") ]:
with alloc_fail(hapd, count, func):
eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
for count,func,pw in [ (1, "eap_eke_init", "hello"),
(1, "eap_eke_get_session_id", "hello"),
(1, "eap_eke_getKey", "hello"),
(1, "eap_eke_build_msg", "hello"),
(1, "eap_eke_build_failure", "wrong"),
(1, "eap_eke_build_identity", "hello"),
(2, "eap_eke_build_identity", "hello") ]:
with alloc_fail(hapd, count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="EKE", identity="eke user", password=pw,
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having
# reached the allocation failure.
for i in range(20):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
dev[0].request("REMOVE_NETWORK all")
for count in range(1, 1000):
try:
with alloc_fail(hapd, count, "eap_server_sm_step"):
dev[0].connect("test-wpa2-eap",
key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="EKE", identity="eke user", password=pw,
wait_connect=False, scan_freq="2412")
# This would eventually time out, but we can stop after having
# reached the allocation failure.
for i in range(10):
time.sleep(0.1)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
dev[0].request("REMOVE_NETWORK all")
except Exception, e:
if str(e) == "Allocation failure did not trigger":
if count < 30:
raise Exception("Too few allocation failures")
logger.info("%d allocation failures tested" % (count - 1))
break
raise e
def test_ap_wpa2_eap_ikev2(dev, apdev):
"""WPA2-Enterprise connection using EAP-IKEv2"""
check_eap_capa(dev[0], "IKEV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
password="ike password")
eap_reauth(dev[0], "IKEV2")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
password="ike password", fragment_size="50")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
password="ike-password", expect_failure=True)
def test_ap_wpa2_eap_ikev2_as_frag(dev, apdev):
"""WPA2-Enterprise connection using EAP-IKEv2 with server fragmentation"""
check_eap_capa(dev[0], "IKEV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf",
"fragment_size": "50" }
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
password="ike password")
eap_reauth(dev[0], "IKEV2")
def test_ap_wpa2_eap_ikev2_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-IKEv2 and OOM"""
check_eap_capa(dev[0], "IKEV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tests = [ (1, "dh_init"),
(2, "dh_init"),
(1, "dh_derive_shared") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="IKEV2",
identity="ikev2 user", password="ike password",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
if ev is None:
raise Exception("EAP method not selected")
for i in range(10):
if "0:" in dev[0].request("GET_ALLOC_FAIL"):
break
time.sleep(0.02)
dev[0].request("REMOVE_NETWORK all")
tests = [ (1, "os_get_random;dh_init") ]
for count, func in tests:
with fail_test(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="IKEV2",
identity="ikev2 user", password="ike password",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
if ev is None:
raise Exception("EAP method not selected")
for i in range(10):
if "0:" in dev[0].request("GET_FAIL"):
break
time.sleep(0.02)
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_pax(dev, apdev):
"""WPA2-Enterprise connection using EAP-PAX"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
eap_reauth(dev[0], "PAX")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="ff23456789abcdef0123456789abcdef",
expect_failure=True)
def test_ap_wpa2_eap_psk(dev, apdev):
"""WPA2-Enterprise connection using EAP-PSK"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params["wpa_key_mgmt"] = "WPA-EAP-SHA256"
params["ieee80211w"] = "2"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef", sha256=True)
eap_reauth(dev[0], "PSK", sha256=True)
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-5"),
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-5") ])
bss = dev[0].get_bss(apdev[0]['bssid'])
if 'flags' not in bss:
raise Exception("Could not get BSS flags from BSS table")
if "[WPA2-EAP-SHA256-CCMP]" not in bss['flags']:
raise Exception("Unexpected BSS flags: " + bss['flags'])
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com",
password_hex="ff23456789abcdef0123456789abcdef", sha256=True,
expect_failure=True)
def test_ap_wpa2_eap_psk_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-PSK and OOM"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tests = [ (1, "aes_128_ctr_encrypt;aes_128_eax_encrypt"),
(1, "omac1_aes_128;aes_128_eax_encrypt"),
(2, "omac1_aes_128;aes_128_eax_encrypt"),
(3, "omac1_aes_128;aes_128_eax_encrypt"),
(1, "=aes_128_eax_encrypt"),
(1, "omac1_aes_vector"),
(1, "aes_128_ctr_encrypt;aes_128_eax_decrypt"),
(1, "omac1_aes_128;aes_128_eax_decrypt"),
(2, "omac1_aes_128;aes_128_eax_decrypt"),
(3, "omac1_aes_128;aes_128_eax_decrypt"),
(1, "=aes_128_eax_decrypt") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PSK",
identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
if ev is None:
raise Exception("EAP method not selected")
for i in range(10):
if "0:" in dev[0].request("GET_ALLOC_FAIL"):
break
time.sleep(0.02)
dev[0].request("REMOVE_NETWORK all")
with alloc_fail(dev[0], 1, "aes_128_encrypt_block"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PSK",
identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP method failure not reported")
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa_eap_peap_eap_mschapv2(dev, apdev):
"""WPA-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa_eap_params(ssid="test-wpa-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="PEAP",
identity="user", password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem", wait_connect=False,
scan_freq="2412")
eap_check_auth(dev[0], "PEAP", True, rsn=False)
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP", rsn=False)
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-50-f2-1"),
("dot11RSNAAuthenticationSuiteSelected", "00-50-f2-1") ])
status = dev[0].get_status(extra="VERBOSE")
if 'portControl' not in status:
raise Exception("portControl missing from STATUS-VERBOSE")
if status['portControl'] != 'Auto':
raise Exception("Unexpected portControl value: " + status['portControl'])
if 'eap_session_id' not in status:
raise Exception("eap_session_id missing from STATUS-VERBOSE")
if not status['eap_session_id'].startswith("19"):
raise Exception("Unexpected eap_session_id value: " + status['eap_session_id'])
def test_ap_wpa2_eap_interactive(dev, apdev):
"""WPA2-Enterprise connection using interactive identity/password entry"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
tests = [ ("Connection with dynamic TTLS/MSCHAPv2 password entry",
"TTLS", "ttls", "DOMAIN\mschapv2 user", "auth=MSCHAPV2",
None, "password"),
("Connection with dynamic TTLS/MSCHAPv2 identity and password entry",
"TTLS", "ttls", None, "auth=MSCHAPV2",
"DOMAIN\mschapv2 user", "password"),
("Connection with dynamic TTLS/EAP-MSCHAPv2 password entry",
"TTLS", "ttls", "user", "autheap=MSCHAPV2", None, "password"),
("Connection with dynamic TTLS/EAP-MD5 password entry",
"TTLS", "ttls", "user", "autheap=MD5", None, "password"),
("Connection with dynamic PEAP/EAP-MSCHAPv2 password entry",
"PEAP", None, "user", "auth=MSCHAPV2", None, "password"),
("Connection with dynamic PEAP/EAP-GTC password entry",
"PEAP", None, "user", "auth=GTC", None, "password") ]
for [desc,eap,anon,identity,phase2,req_id,req_pw] in tests:
logger.info(desc)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap=eap,
anonymous_identity=anon, identity=identity,
ca_cert="auth_serv/ca.pem", phase2=phase2,
wait_connect=False, scan_freq="2412")
if req_id:
ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"])
if ev is None:
raise Exception("Request for identity timed out")
id = ev.split(':')[0].split('-')[-1]
dev[0].request("CTRL-RSP-IDENTITY-" + id + ":" + req_id)
ev = dev[0].wait_event(["CTRL-REQ-PASSWORD","CTRL-REQ-OTP"])
if ev is None:
raise Exception("Request for password timed out")
id = ev.split(':')[0].split('-')[-1]
type = "OTP" if "CTRL-REQ-OTP" in ev else "PASSWORD"
dev[0].request("CTRL-RSP-" + type + "-" + id + ":" + req_pw)
dev[0].wait_connected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_ext_enable_network_while_connected(dev, apdev):
"""WPA2-Enterprise interactive identity entry and ENABLE_NETWORK"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
id_other = dev[0].connect("other", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
req_id = "DOMAIN\mschapv2 user"
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
anonymous_identity="ttls", identity=None,
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"])
if ev is None:
raise Exception("Request for identity timed out")
id = ev.split(':')[0].split('-')[-1]
dev[0].request("CTRL-RSP-IDENTITY-" + id + ":" + req_id)
dev[0].wait_connected(timeout=10)
if "OK" not in dev[0].request("ENABLE_NETWORK " + str(id_other)):
raise Exception("Failed to enable network")
ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=1)
if ev is not None:
raise Exception("Unexpected reconnection attempt on ENABLE_NETWORK")
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_vendor_test(dev, apdev):
"""WPA2-Enterprise connection using EAP vendor test"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "VENDOR-TEST", "vendor-test")
eap_reauth(dev[0], "VENDOR-TEST")
eap_connect(dev[1], apdev[0], "VENDOR-TEST", "vendor-test",
password="pending")
def test_ap_wpa2_eap_fast_mschapv2_unauth_prov(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/MSCHAPv2 and unauthenticated provisioning"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1", pac_file="blob://fast_pac")
hwsim_utils.test_connectivity(dev[0], hapd)
res = eap_reauth(dev[0], "FAST")
if res['tls_session_reused'] != '1':
raise Exception("EAP-FAST could not use PAC session ticket")
def test_ap_wpa2_eap_fast_pac_file(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-FAST/MSCHAPv2 and PAC file"""
check_eap_capa(dev[0], "FAST")
pac_file = os.path.join(params['logdir'], "fast.pac")
pac_file2 = os.path.join(params['logdir'], "fast-bin.pac")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
try:
eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1", pac_file=pac_file)
with open(pac_file, "r") as f:
data = f.read()
if "wpa_supplicant EAP-FAST PAC file - version 1" not in data:
raise Exception("PAC file header missing")
if "PAC-Key=" not in data:
raise Exception("PAC-Key missing from PAC file")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
pac_file=pac_file)
eap_connect(dev[1], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1 fast_pac_format=binary",
pac_file=pac_file2)
dev[1].request("REMOVE_NETWORK all")
eap_connect(dev[1], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_pac_format=binary",
pac_file=pac_file2)
finally:
try:
os.remove(pac_file)
except:
pass
try:
os.remove(pac_file2)
except:
pass
def test_ap_wpa2_eap_fast_binary_pac(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST and binary PAC format"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1 fast_max_pac_list_len=1 fast_pac_format=binary",
pac_file="blob://fast_pac_bin")
res = eap_reauth(dev[0], "FAST")
if res['tls_session_reused'] != '1':
raise Exception("EAP-FAST could not use PAC session ticket")
def test_ap_wpa2_eap_fast_missing_pac_config(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST and missing PAC config"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
pac_file="blob://fast_pac_not_in_use",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
dev[0].request("REMOVE_NETWORK all")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_fast_gtc_auth_prov(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/GTC and authenticated provisioning"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth")
hwsim_utils.test_connectivity(dev[0], hapd)
res = eap_reauth(dev[0], "FAST")
if res['tls_session_reused'] != '1':
raise Exception("EAP-FAST could not use PAC session ticket")
def test_ap_wpa2_eap_fast_gtc_identity_change(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/GTC and identity changing"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
id = eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
phase1="fast_provisioning=2",
pac_file="blob://fast_pac_auth")
dev[0].set_network_quoted(id, "identity", "user2")
dev[0].wait_disconnected()
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=15)
if ev is None:
raise Exception("EAP-FAST not started")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_fast_prf_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST and OOM in PRF"""
check_eap_capa(dev[0], "FAST")
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
func = "openssl_tls_prf"
count = 2
elif tls.startswith("internal"):
func = "tls_connection_prf"
count = 1
else:
raise HwsimSkip("Unsupported TLS library")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
password="password", ca_cert="auth_serv/ca.pem",
phase2="auth=GTC",
phase1="fast_provisioning=2",
pac_file="blob://fast_pac_auth",
wait_connect=False, scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
if ev is None:
raise Exception("EAP failure not reported")
dev[0].request("DISCONNECT")
def test_ap_wpa2_eap_fast_server_oom(dev, apdev):
"""EAP-FAST/MSCHAPv2 and server OOM"""
check_eap_capa(dev[0], "FAST")
params = int_eap_server_params()
params['dh_file'] = 'auth_serv/dh.conf'
params['pac_opaque_encr_key'] = '000102030405060708090a0b0c0d0e0f'
params['eap_fast_a_id'] = '1011'
params['eap_fast_a_id_info'] = 'another test server'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
with alloc_fail(hapd, 1, "tls_session_ticket_ext_cb"):
id = eap_connect(dev[0], apdev[0], "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1",
pac_file="blob://fast_pac",
expect_failure=True)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("No EAP failure reported")
dev[0].wait_disconnected()
dev[0].request("DISCONNECT")
dev[0].select_network(id, freq="2412")
def test_ap_wpa2_eap_tls_ocsp(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and verifying OCSP"""
check_ocsp_support(dev[0])
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2)
def int_eap_server_params():
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf",
"ca_cert": "auth_serv/ca.pem",
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key" }
return params
def test_ap_wpa2_eap_tls_ocsp_ca_signed_good(dev, apdev, params):
"""EAP-TLS and CA signed OCSP response (good)"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
scan_freq="2412")
def test_ap_wpa2_eap_tls_ocsp_ca_signed_revoked(dev, apdev, params):
"""EAP-TLS and CA signed OCSP response (revoked)"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed-revoked.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
if 'certificate revoked' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_tls_ocsp_ca_signed_unknown(dev, apdev, params):
"""EAP-TLS and CA signed OCSP response (unknown)"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed-unknown.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_tls_ocsp_server_signed(dev, apdev, params):
"""EAP-TLS and server signed OCSP response"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-resp-server-signed.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_tls_ocsp_invalid_data(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and invalid OCSP data"""
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-req.der"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_tls_ocsp_invalid(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and invalid OCSP response"""
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-server-cache.der-invalid"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_tls_ocsp_unknown_sign(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and unknown OCSP signer"""
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-server-cache.der-unknown-sign"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_ttls_ocsp_revoked(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-server-cache-revoked.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
phase2="auth=PAP", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
if 'certificate revoked' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_ttls_ocsp_unknown(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked"""
check_ocsp_support(dev[0])
ocsp = os.path.join(params['logdir'], "ocsp-server-cache-unknown.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
phase2="auth=PAP", ocsp=2,
wait_connect=False, scan_freq="2412")
count = 0
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
if ev is None:
raise Exception("Timeout on EAP status")
if 'bad certificate status response' in ev:
break
count = count + 1
if count > 10:
raise Exception("Unexpected number of EAP status messages")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_ttls_optional_ocsp_unknown(dev, apdev, params):
"""WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked"""
ocsp = os.path.join(params['logdir'], "ocsp-server-cache-unknown.der")
if not os.path.exists(ocsp):
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
phase2="auth=PAP", ocsp=1, scan_freq="2412")
def test_ap_wpa2_eap_tls_domain_suffix_match_cn_full(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain suffix match (CN)"""
check_domain_match_full(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_suffix_match="server3.w1.fi",
scan_freq="2412")
def test_ap_wpa2_eap_tls_domain_match_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domainmatch (CN)"""
check_domain_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_match="server3.w1.fi",
scan_freq="2412")
def test_ap_wpa2_eap_tls_domain_suffix_match_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain suffix match (CN)"""
check_domain_match_full(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_suffix_match="w1.fi",
scan_freq="2412")
def test_ap_wpa2_eap_tls_domain_suffix_mismatch_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain suffix mismatch (CN)"""
check_domain_suffix_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_suffix_match="example.com",
wait_connect=False,
scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_suffix_match="erver3.w1.fi",
wait_connect=False,
scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
ev = dev[1].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report (2)")
def test_ap_wpa2_eap_tls_domain_mismatch_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain mismatch (CN)"""
check_domain_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_match="example.com",
wait_connect=False,
scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever",
domain_match="w1.fi",
wait_connect=False,
scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
ev = dev[1].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report (2)")
def test_ap_wpa2_eap_ttls_expired_cert(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and expired certificate"""
skip_with_fips(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-expired.pem"
params["private_key"] = "auth_serv/server-expired.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
wait_connect=False,
scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"])
if ev is None:
raise Exception("Timeout on EAP certificate error report")
if "reason=4" not in ev or "certificate has expired" not in ev:
raise Exception("Unexpected failure reason: " + ev)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_ttls_ignore_expired_cert(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and ignore certificate expiration"""
skip_with_fips(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-expired.pem"
params["private_key"] = "auth_serv/server-expired.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
phase1="tls_disable_time_checks=1",
scan_freq="2412")
def test_ap_wpa2_eap_ttls_long_duration(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and long certificate duration"""
skip_with_fips(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-long-duration.pem"
params["private_key"] = "auth_serv/server-long-duration.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
scan_freq="2412")
def test_ap_wpa2_eap_ttls_server_cert_eku_client(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and server cert with client EKU"""
skip_with_fips(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-eku-client.pem"
params["private_key"] = "auth_serv/server-eku-client.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
wait_connect=False,
scan_freq="2412")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("Timeout on EAP failure report")
def test_ap_wpa2_eap_ttls_server_cert_eku_client_server(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and server cert with client and server EKU"""
skip_with_fips(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-eku-client-server.pem"
params["private_key"] = "auth_serv/server-eku-client-server.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
scan_freq="2412")
def test_ap_wpa2_eap_ttls_server_pkcs12(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and server PKCS#12 file"""
skip_with_fips(dev[0])
params = int_eap_server_params()
del params["server_cert"]
params["private_key"] = "auth_serv/server.pkcs12"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
scan_freq="2412")
def test_ap_wpa2_eap_ttls_dh_params(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="auth_serv/dh.conf")
def test_ap_wpa2_eap_ttls_dh_params_dsa(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and setting DH params (DSA)"""
check_dh_dsa_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="auth_serv/dsaparam.pem")
def test_ap_wpa2_eap_ttls_dh_params_not_found(dev, apdev):
"""EAP-TTLS and DH params file not found"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
dh_file="auth_serv/dh-no-such-file.conf",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("EAP failure timed out")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_ttls_dh_params_invalid(dev, apdev):
"""EAP-TTLS and invalid DH params file"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
dh_file="auth_serv/ca.pem",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("EAP failure timed out")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_ttls_dh_params_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params from blob"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dh = read_pem("auth_serv/dh2.conf")
if "OK" not in dev[0].request("SET blob dhparams " + dh.encode("hex")):
raise Exception("Could not set dhparams blob")
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="blob://dhparams")
def test_ap_wpa2_eap_ttls_dh_params_server(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and alternative server dhparams"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dh2.conf"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP")
def test_ap_wpa2_eap_ttls_dh_params_dsa_server(dev, apdev):
"""WPA2-Enterprise using EAP-TTLS and alternative server dhparams (DSA)"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dsaparam.pem"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP")
def test_ap_wpa2_eap_ttls_dh_params_not_found(dev, apdev):
"""EAP-TLS server and dhparams file not found"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dh-no-such-file.conf"
hapd = hostapd.add_ap(apdev[0]['ifname'], params, no_enable=True)
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Invalid configuration accepted")
def test_ap_wpa2_eap_ttls_dh_params_invalid(dev, apdev):
"""EAP-TLS server and invalid dhparams file"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/ca.pem"
hapd = hostapd.add_ap(apdev[0]['ifname'], params, no_enable=True)
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Invalid configuration accepted")
def test_ap_wpa2_eap_reauth(dev, apdev):
"""WPA2-Enterprise and Authenticator forcing reauthentication"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['eap_reauth_period'] = '2'
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
logger.info("Wait for reauthentication")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Timeout on reauthentication")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("Timeout on reauthentication")
for i in range(0, 20):
state = dev[0].get_status_field("wpa_state")
if state == "COMPLETED":
break
time.sleep(0.1)
if state != "COMPLETED":
raise Exception("Reauthentication did not complete")
def test_ap_wpa2_eap_request_identity_message(dev, apdev):
"""Optional displayable message in EAP Request-Identity"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['eap_message'] = 'hello\\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com'
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
def test_ap_wpa2_eap_sim_aka_result_ind(dev, apdev):
"""WPA2-Enterprise using EAP-SIM/AKA and protected result indication"""
check_hlr_auc_gw_support()
params = int_eap_server_params()
params['eap_sim_db'] = "unix:/tmp/hlr_auc_gw.sock"
params['eap_sim_aka_result_ind'] = "1"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="result_ind=1")
eap_reauth(dev[0], "SIM")
eap_connect(dev[1], apdev[0], "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
phase1="result_ind=1")
eap_reauth(dev[0], "AKA")
eap_connect(dev[1], apdev[0], "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123",
phase1="result_ind=1")
eap_reauth(dev[0], "AKA'")
eap_connect(dev[1], apdev[0], "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
def test_ap_wpa2_eap_too_many_roundtrips(dev, apdev):
"""WPA2-Enterprise connection resulting in too many EAP roundtrips"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="mschap user",
wait_connect=False, scan_freq="2412", ieee80211w="1",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
fragment_size="10")
ev = dev[0].wait_event(["EAP: more than"], timeout=20)
if ev is None:
raise Exception("EAP roundtrip limit not reached")
def test_ap_wpa2_eap_expanded_nak(dev, apdev):
"""WPA2-Enterprise connection with EAP resulting in expanded NAK"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="PSK", identity="vendor-test",
password_hex="ff23456789abcdef0123456789abcdef",
wait_connect=False)
found = False
for i in range(0, 5):
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
if "refuse proposed method" in ev:
found = True
break
if not found:
raise Exception("Unexpected EAP status: " + ev)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
if ev is None:
raise Exception("EAP failure timed out")
def test_ap_wpa2_eap_sql(dev, apdev, params):
"""WPA2-Enterprise connection using SQLite for user DB"""
skip_with_fips(dev[0])
try:
import sqlite3
except ImportError:
raise HwsimSkip("No sqlite3 module available")
dbfile = os.path.join(params['logdir'], "eap-user.db")
try:
os.remove(dbfile)
except:
pass
con = sqlite3.connect(dbfile)
with con:
cur = con.cursor()
cur.execute("CREATE TABLE users(identity TEXT PRIMARY KEY, methods TEXT, password TEXT, remediation TEXT, phase2 INTEGER)")
cur.execute("CREATE TABLE wildcards(identity TEXT PRIMARY KEY, methods TEXT)")
cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-pap','TTLS-PAP','password',1)")
cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-chap','TTLS-CHAP','password',1)")
cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-mschap','TTLS-MSCHAP','password',1)")
cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-mschapv2','TTLS-MSCHAPV2','password',1)")
cur.execute("INSERT INTO wildcards(identity,methods) VALUES ('','TTLS,TLS')")
cur.execute("CREATE TABLE authlog(timestamp TEXT, session TEXT, nas_ip TEXT, username TEXT, note TEXT)")
try:
params = int_eap_server_params()
params["eap_user_file"] = "sqlite:" + dbfile
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "user-mschapv2",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
dev[0].request("REMOVE_NETWORK all")
eap_connect(dev[1], apdev[0], "TTLS", "user-mschap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP")
dev[1].request("REMOVE_NETWORK all")
eap_connect(dev[0], apdev[0], "TTLS", "user-chap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP")
eap_connect(dev[1], apdev[0], "TTLS", "user-pap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
finally:
os.remove(dbfile)
def test_ap_wpa2_eap_non_ascii_identity(dev, apdev):
"""WPA2-Enterprise connection attempt using non-ASCII identity"""
params = int_eap_server_params()
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="\x80", password="password", wait_connect=False)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="a\x80", password="password", wait_connect=False)
for i in range(0, 2):
ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
def test_ap_wpa2_eap_non_ascii_identity2(dev, apdev):
"""WPA2-Enterprise connection attempt using non-ASCII identity"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="\x80", password="password", wait_connect=False)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="a\x80", password="password", wait_connect=False)
for i in range(0, 2):
ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if ev is None:
raise Exception("EAP method selection timed out")
def test_openssl_cipher_suite_config_wpas(dev, apdev):
"""OpenSSL cipher suite configuration on wpa_supplicant"""
tls = dev[0].request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("TLS library is not OpenSSL: " + tls)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="AES128",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
eap_connect(dev[1], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="EXPORT",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True, maybe_local_error=True)
dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password",
openssl_ciphers="FOO",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
wait_connect=False)
ev = dev[2].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP failure after invalid openssl_ciphers not reported")
dev[2].request("DISCONNECT")
def test_openssl_cipher_suite_config_hapd(dev, apdev):
"""OpenSSL cipher suite configuration on hostapd"""
tls = dev[0].request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("wpa_supplicant TLS library is not OpenSSL: " + tls)
params = int_eap_server_params()
params['openssl_ciphers'] = "AES256"
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
tls = hapd.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("hostapd TLS library is not OpenSSL: " + tls)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
eap_connect(dev[1], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="AES128",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
eap_connect(dev[2], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="HIGH:!ADH",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
params['openssl_ciphers'] = "FOO"
hapd2 = hostapd.add_ap(apdev[1]['ifname'], params, no_enable=True)
if "FAIL" not in hapd2.request("ENABLE"):
raise Exception("Invalid openssl_ciphers value accepted")
def test_wpa2_eap_ttls_pap_key_lifetime_in_memory(dev, apdev, params):
"""Key lifetime in memory with WPA2-Enterprise using EAP-TTLS/PAP"""
p = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], p)
password = "63d2d21ac3c09ed567ee004a34490f1d16e7fa5835edf17ddba70a63f1a90a25"
pid = find_wpas_process(dev[0])
id = eap_connect(dev[0], apdev[0], "TTLS", "pap-secret",
anonymous_identity="ttls", password=password,
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
# The decrypted copy of GTK is freed only after the CTRL-EVENT-CONNECTED
# event has been delivered, so verify that wpa_supplicant has returned to
# eloop before reading process memory.
time.sleep(1)
dev[0].ping()
buf = read_process_memory(pid, password)
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
dev[0].relog()
msk = None
emsk = None
pmk = None
ptk = None
gtk = None
with open(os.path.join(params['logdir'], 'log0'), 'r') as f:
for l in f.readlines():
if "EAP-TTLS: Derived key - hexdump" in l:
val = l.strip().split(':')[3].replace(' ', '')
msk = binascii.unhexlify(val)
if "EAP-TTLS: Derived EMSK - hexdump" in l:
val = l.strip().split(':')[3].replace(' ', '')
emsk = binascii.unhexlify(val)
if "WPA: PMK - hexdump" in l:
val = l.strip().split(':')[3].replace(' ', '')
pmk = binascii.unhexlify(val)
if "WPA: PTK - hexdump" in l:
val = l.strip().split(':')[3].replace(' ', '')
ptk = binascii.unhexlify(val)
if "WPA: Group Key - hexdump" in l:
val = l.strip().split(':')[3].replace(' ', '')
gtk = binascii.unhexlify(val)
if not msk or not emsk or not pmk or not ptk or not gtk:
raise Exception("Could not find keys from debug log")
if len(gtk) != 16:
raise Exception("Unexpected GTK length")
kck = ptk[0:16]
kek = ptk[16:32]
tk = ptk[32:48]
fname = os.path.join(params['logdir'],
'wpa2_eap_ttls_pap_key_lifetime_in_memory.memctx-')
logger.info("Checking keys in memory while associated")
get_key_locations(buf, password, "Password")
get_key_locations(buf, pmk, "PMK")
get_key_locations(buf, msk, "MSK")
get_key_locations(buf, emsk, "EMSK")
if password not in buf:
raise HwsimSkip("Password not found while associated")
if pmk not in buf:
raise HwsimSkip("PMK not found while associated")
if kck not in buf:
raise Exception("KCK not found while associated")
if kek not in buf:
raise Exception("KEK not found while associated")
if tk in buf:
raise Exception("TK found from memory")
if gtk in buf:
get_key_locations(buf, gtk, "GTK")
raise Exception("GTK found from memory")
logger.info("Checking keys in memory after disassociation")
buf = read_process_memory(pid, password)
# Note: Password is still present in network configuration
# Note: PMK is in PMKSA cache and EAP fast re-auth data
get_key_locations(buf, password, "Password")
get_key_locations(buf, pmk, "PMK")
get_key_locations(buf, msk, "MSK")
get_key_locations(buf, emsk, "EMSK")
verify_not_present(buf, kck, fname, "KCK")
verify_not_present(buf, kek, fname, "KEK")
verify_not_present(buf, tk, fname, "TK")
verify_not_present(buf, gtk, fname, "GTK")
dev[0].request("PMKSA_FLUSH")
dev[0].set_network_quoted(id, "identity", "foo")
logger.info("Checking keys in memory after PMKSA cache and EAP fast reauth flush")
buf = read_process_memory(pid, password)
get_key_locations(buf, password, "Password")
get_key_locations(buf, pmk, "PMK")
get_key_locations(buf, msk, "MSK")
get_key_locations(buf, emsk, "EMSK")
verify_not_present(buf, pmk, fname, "PMK")
dev[0].request("REMOVE_NETWORK all")
logger.info("Checking keys in memory after network profile removal")
buf = read_process_memory(pid, password)
get_key_locations(buf, password, "Password")
get_key_locations(buf, pmk, "PMK")
get_key_locations(buf, msk, "MSK")
get_key_locations(buf, emsk, "EMSK")
verify_not_present(buf, password, fname, "password")
verify_not_present(buf, pmk, fname, "PMK")
verify_not_present(buf, kck, fname, "KCK")
verify_not_present(buf, kek, fname, "KEK")
verify_not_present(buf, tk, fname, "TK")
verify_not_present(buf, gtk, fname, "GTK")
verify_not_present(buf, msk, fname, "MSK")
verify_not_present(buf, emsk, fname, "EMSK")
def test_ap_wpa2_eap_unexpected_wep_eapol_key(dev, apdev):
"""WPA2-Enterprise connection and unexpected WEP EAPOL-Key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
bssid = apdev[0]['bssid']
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
# Send unexpected WEP EAPOL-Key; this gets dropped
res = dev[0].request("EAPOL_RX " + bssid + " 0203002c0100000000000000000000000000000000000000000000000000000000000000000000000000000000000000")
if "OK" not in res:
raise Exception("EAPOL_RX to wpa_supplicant failed")
def test_ap_wpa2_eap_in_bridge(dev, apdev):
"""WPA2-EAP and wpas interface in a bridge"""
br_ifname='sta-br0'
ifname='wlan5'
try:
_test_ap_wpa2_eap_in_bridge(dev, apdev)
finally:
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
subprocess.call(['brctl', 'delif', br_ifname, ifname])
subprocess.call(['brctl', 'delbr', br_ifname])
subprocess.call(['iw', ifname, 'set', '4addr', 'off'])
def _test_ap_wpa2_eap_in_bridge(dev, apdev):
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
br_ifname='sta-br0'
ifname='wlan5'
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
subprocess.call(['brctl', 'addbr', br_ifname])
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
subprocess.call(['iw', ifname, 'set', '4addr', 'on'])
subprocess.check_call(['brctl', 'addif', br_ifname, ifname])
wpas.interface_add(ifname, br_ifname=br_ifname)
wpas.dump_monitor()
id = eap_connect(wpas, apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
wpas.dump_monitor()
eap_reauth(wpas, "PAX")
wpas.dump_monitor()
# Try again as a regression test for packet socket workaround
eap_reauth(wpas, "PAX")
wpas.dump_monitor()
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
wpas.request("RECONNECT")
wpas.wait_connected()
wpas.dump_monitor()
def test_ap_wpa2_eap_session_ticket(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and TLS session ticket enabled"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem",
phase1="tls_disable_session_ticket=0", phase2="auth=PAP")
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_no_workaround(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and eap_workaround=0"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
eap_reauth(dev[0], "TTLS")
def test_ap_wpa2_eap_tls_check_crl(dev, apdev):
"""EAP-TLS and server checking CRL"""
params = int_eap_server_params()
params['check_crl'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
# check_crl=1 and no CRL available --> reject connection
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
hapd.disable()
hapd.set("ca_cert", "auth_serv/ca-and-crl.pem")
hapd.enable()
# check_crl=1 and valid CRL --> accept
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
dev[0].request("REMOVE_NETWORK all")
hapd.disable()
hapd.set("check_crl", "2")
hapd.enable()
# check_crl=2 and valid CRL --> accept
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
dev[0].request("REMOVE_NETWORK all")
def test_ap_wpa2_eap_tls_oom(dev, apdev):
"""EAP-TLS and OOM"""
check_subject_match_support(dev[0])
check_altsubject_match_support(dev[0])
check_domain_match(dev[0])
check_domain_match_full(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tests = [ (1, "tls_connection_set_subject_match"),
(2, "tls_connection_set_subject_match"),
(3, "tls_connection_set_subject_match"),
(4, "tls_connection_set_subject_match") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key",
subject_match="/C=FI/O=w1.fi/CN=server.w1.fi",
altsubject_match="EMAIL:noone@example.com;DNS:server.w1.fi;URI:http://example.com/",
domain_suffix_match="server.w1.fi",
domain_match="server.w1.fi",
wait_connect=False, scan_freq="2412")
# TLS parameter configuration error results in CTRL-REQ-PASSPHRASE
ev = dev[0].wait_event(["CTRL-REQ-PASSPHRASE"], timeout=5)
if ev is None:
raise Exception("No passphrase request")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_tls_macacl(dev, apdev):
"""WPA2-Enterprise connection using MAC ACL"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params["macaddr_acl"] = "2"
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[1], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
def test_ap_wpa2_eap_oom(dev, apdev):
"""EAP server and OOM"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
with alloc_fail(hapd, 1, "eapol_auth_alloc"):
# The first attempt fails, but STA will send EAPOL-Start to retry and
# that succeeds.
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key",
scan_freq="2412")
def check_tls_ver(dev, ap, phase1, expected):
eap_connect(dev, ap, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key",
phase1=phase1)
ver = dev.get_status_field("eap_tls_version")
if ver != expected:
raise Exception("Unexpected TLS version (expected %s): %s" % (expected, ver))
def test_ap_wpa2_eap_tls_versions(dev, apdev):
"""EAP-TLS and TLS version configuration"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
if "build=OpenSSL 1.0.2" in tls and "run=OpenSSL 1.0.2" in tls:
check_tls_ver(dev[0], apdev[0],
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1",
"TLSv1.2")
elif tls.startswith("internal"):
check_tls_ver(dev[0], apdev[0],
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1", "TLSv1.2")
check_tls_ver(dev[1], apdev[0],
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_2=1", "TLSv1.1")
check_tls_ver(dev[2], apdev[0],
"tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1", "TLSv1")
def test_rsn_ie_proto_eap_sta(dev, apdev):
"""RSN element protocol testing for EAP cases on STA side"""
bssid = apdev[0]['bssid']
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
# This is the RSN element used normally by hostapd
params['own_ie_override'] = '30140100000fac040100000fac040100000fac010c00'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412")
tests = [ ('No RSN Capabilities field',
'30120100000fac040100000fac040100000fac01'),
('No AKM Suite fields',
'300c0100000fac040100000fac04'),
('No Pairwise Cipher Suite fields',
'30060100000fac04'),
('No Group Data Cipher Suite field',
'30020100') ]
for txt,ie in tests:
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
logger.info(txt)
hapd.disable()
hapd.set('own_ie_override', ie)
hapd.enable()
dev[0].request("BSS_FLUSH 0")
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
dev[0].select_network(id, freq=2412)
dev[0].wait_connected()
def check_tls_session_resumption_capa(dev, hapd):
tls = hapd.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("hostapd TLS library is not OpenSSL: " + tls)
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("Session resumption not supported with this TLS library: " + tls)
def test_eap_ttls_pap_session_resumption(dev, apdev):
"""EAP-TTLS/PAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_ttls_chap_session_resumption(dev, apdev):
"""EAP-TTLS/CHAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_ttls_mschap_session_resumption(dev, apdev):
"""EAP-TTLS/MSCHAP session resumption"""
check_domain_suffix_match(dev[0])
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
domain_suffix_match="server.w1.fi")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_ttls_mschapv2_session_resumption(dev, apdev):
"""EAP-TTLS/MSCHAPv2 session resumption"""
check_domain_suffix_match(dev[0])
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="server.w1.fi")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_ttls_eap_gtc_session_resumption(dev, apdev):
"""EAP-TTLS/EAP-GTC session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_ttls_no_session_resumption(dev, apdev):
"""EAP-TTLS session resumption disabled on server"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '0'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the second connection")
def test_eap_peap_session_resumption(dev, apdev):
"""EAP-PEAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_peap_no_session_resumption(dev, apdev):
"""EAP-PEAP session resumption disabled on server"""
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the second connection")
def test_eap_tls_session_resumption(dev, apdev):
"""EAP-TLS session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the third connection")
def test_eap_tls_session_resumption_expiration(dev, apdev):
"""EAP-TLS session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
check_tls_session_resumption_capa(dev[0], hapd)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
# Allow multiple attempts since OpenSSL may not expire the cached entry
# immediately.
for i in range(10):
time.sleep(1.2)
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") == '0':
break
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Session resumption used after lifetime expiration")
def test_eap_tls_no_session_resumption(dev, apdev):
"""EAP-TLS session resumption disabled on server"""
params = int_eap_server_params()
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the second connection")
def test_eap_tls_session_resumption_radius(dev, apdev):
"""EAP-TLS session resumption (RADIUS)"""
params = { "ssid": "as", "beacon_int": "2000",
"radius_server_clients": "auth_serv/radius_clients.conf",
"radius_server_auth_port": '18128',
"eap_server": "1",
"eap_user_file": "auth_serv/eap_user.conf",
"ca_cert": "auth_serv/ca.pem",
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key",
"tls_session_lifetime": "60" }
authsrv = hostapd.add_ap(apdev[1]['ifname'], params)
check_tls_session_resumption_capa(dev[0], authsrv)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '1':
raise Exception("Session resumption not used on the second connection")
def test_eap_tls_no_session_resumption_radius(dev, apdev):
"""EAP-TLS session resumption disabled (RADIUS)"""
params = { "ssid": "as", "beacon_int": "2000",
"radius_server_clients": "auth_serv/radius_clients.conf",
"radius_server_auth_port": '18128',
"eap_server": "1",
"eap_user_file": "auth_serv/eap_user.conf",
"ca_cert": "auth_serv/ca.pem",
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key",
"tls_session_lifetime": "0" }
hostapd.add_ap(apdev[1]['ifname'], params)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the first connection")
dev[0].request("REAUTHENTICATE")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("EAP success timed out")
ev = dev[0].wait_event(["WPA: Key negotiation completed"], timeout=10)
if ev is None:
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the second connection")
def test_eap_mschapv2_errors(dev, apdev):
"""EAP-MSCHAPv2 error cases"""
check_eap_capa(dev[0], "MSCHAPV2")
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user", password="password",
scan_freq="2412")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "hash_nt_password_hash;mschapv2_derive_response"),
(1, "nt_password_hash;mschapv2_derive_response"),
(1, "nt_password_hash;=mschapv2_derive_response"),
(1, "generate_nt_response;mschapv2_derive_response"),
(1, "generate_authenticator_response;mschapv2_derive_response"),
(1, "nt_password_hash;=mschapv2_derive_response"),
(1, "get_master_key;mschapv2_derive_response"),
(1, "os_get_random;eap_mschapv2_challenge_reply") ]
for count, func in tests:
with fail_test(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user", password="password",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "hash_nt_password_hash;mschapv2_derive_response"),
(1, "hash_nt_password_hash;=mschapv2_derive_response"),
(1, "generate_nt_response_pwhash;mschapv2_derive_response"),
(1, "generate_authenticator_response_pwhash;mschapv2_derive_response") ]
for count, func in tests:
with fail_test(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "eap_mschapv2_init"),
(1, "eap_msg_alloc;eap_mschapv2_challenge_reply"),
(1, "eap_msg_alloc;eap_mschapv2_success"),
(1, "eap_mschapv2_getKey") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user", password="password",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "eap_msg_alloc;eap_mschapv2_failure") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user", password="wrong password",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (2, "eap_mschapv2_init"),
(3, "eap_mschapv2_init") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="FAST",
anonymous_identity="FAST", identity="user",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1",
pac_file="blob://fast_pac",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_eap_gpsk_errors(dev, apdev):
"""EAP-GPSK error cases"""
params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "os_get_random;eap_gpsk_send_gpsk_2", None),
(1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2",
"cipher=1"),
(1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2",
"cipher=2"),
(1, "eap_gpsk_derive_keys_helper", None),
(2, "eap_gpsk_derive_keys_helper", None),
(1, "eap_gpsk_compute_mic_aes;eap_gpsk_compute_mic;eap_gpsk_send_gpsk_2",
"cipher=1"),
(1, "hmac_sha256;eap_gpsk_compute_mic;eap_gpsk_send_gpsk_2",
"cipher=2"),
(1, "eap_gpsk_compute_mic;eap_gpsk_validate_gpsk_3_mic", None),
(1, "eap_gpsk_compute_mic;eap_gpsk_send_gpsk_4", None),
(1, "eap_gpsk_derive_mid_helper", None) ]
for count, func, phase1 in tests:
with fail_test(dev[0], count, func):
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
phase1=phase1,
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ (1, "eap_gpsk_init"),
(2, "eap_gpsk_init"),
(3, "eap_gpsk_init"),
(1, "eap_gpsk_process_id_server"),
(1, "eap_msg_alloc;eap_gpsk_send_gpsk_2"),
(1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2"),
(1, "eap_gpsk_derive_mid_helper;eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2"),
(1, "eap_gpsk_derive_keys"),
(1, "eap_gpsk_derive_keys_helper"),
(1, "eap_msg_alloc;eap_gpsk_send_gpsk_4"),
(1, "eap_gpsk_getKey"),
(1, "eap_gpsk_get_emsk"),
(1, "eap_gpsk_get_session_id") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user", erp="1",
password="abcdefghijklmnop0123456789abcdef",
wait_connect=False, scan_freq="2412")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_ap_wpa2_eap_sim_db(dev, apdev, params):
"""EAP-SIM DB error cases"""
sockpath = '/tmp/hlr_auc_gw.sock-test'
try:
os.remove(sockpath)
except:
pass
hparams = int_eap_server_params()
hparams['eap_sim_db'] = 'unix:' + sockpath
hapd = hostapd.add_ap(apdev[0]['ifname'], hparams)
# Initial test with hlr_auc_gw socket not available
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="SIM", identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP-Failure not reported")
dev[0].wait_disconnected()
dev[0].request("DISCONNECT")
# Test with invalid responses and response timeout
class test_handler(SocketServer.DatagramRequestHandler):
def handle(self):
data = self.request[0].strip()
socket = self.request[1]
logger.debug("Received hlr_auc_gw request: " + data)
# EAP-SIM DB: Failed to parse response string
socket.sendto("FOO", self.client_address)
# EAP-SIM DB: Failed to parse response string
socket.sendto("FOO 1", self.client_address)
# EAP-SIM DB: Unknown external response
socket.sendto("FOO 1 2", self.client_address)
logger.info("No proper response - wait for pending eap_sim_db request timeout")
server = SocketServer.UnixDatagramServer(sockpath, test_handler)
server.timeout = 1
dev[0].select_network(id)
server.handle_request()
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
if ev is None:
raise Exception("EAP-Failure not reported")
dev[0].wait_disconnected()
dev[0].request("DISCONNECT")
# Test with a valid response
class test_handler2(SocketServer.DatagramRequestHandler):
def handle(self):
data = self.request[0].strip()
socket = self.request[1]
logger.debug("Received hlr_auc_gw request: " + data)
fname = os.path.join(params['logdir'],
'hlr_auc_gw.milenage_db')
cmd = subprocess.Popen(['../../hostapd/hlr_auc_gw',
'-m', fname, data],
stdout=subprocess.PIPE)
res = cmd.stdout.read().strip()
cmd.stdout.close()
logger.debug("hlr_auc_gw response: " + res)
socket.sendto(res, self.client_address)
server.RequestHandlerClass = test_handler2
dev[0].select_network(id)
server.handle_request()
dev[0].wait_connected()
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
def test_eap_tls_sha512(dev, apdev, params):
"""EAP-TLS with SHA512 signature"""
params = int_eap_server_params()
params["ca_cert"] = "auth_serv/sha512-ca.pem"
params["server_cert"] = "auth_serv/sha512-server.pem"
params["private_key"] = "auth_serv/sha512-server.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
ca_cert="auth_serv/sha512-ca.pem",
client_cert="auth_serv/sha512-user.pem",
private_key="auth_serv/sha512-user.key",
scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
ca_cert="auth_serv/sha512-ca.pem",
client_cert="auth_serv/sha384-user.pem",
private_key="auth_serv/sha384-user.key",
scan_freq="2412")
def test_eap_tls_sha384(dev, apdev, params):
"""EAP-TLS with SHA384 signature"""
params = int_eap_server_params()
params["ca_cert"] = "auth_serv/sha512-ca.pem"
params["server_cert"] = "auth_serv/sha384-server.pem"
params["private_key"] = "auth_serv/sha384-server.key"
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
ca_cert="auth_serv/sha512-ca.pem",
client_cert="auth_serv/sha512-user.pem",
private_key="auth_serv/sha512-user.key",
scan_freq="2412")
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
ca_cert="auth_serv/sha512-ca.pem",
client_cert="auth_serv/sha384-user.pem",
private_key="auth_serv/sha384-user.key",
scan_freq="2412")
def test_ap_wpa2_eap_assoc_rsn(dev, apdev):
"""WPA2-Enterprise AP and association request RSN IE differences"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap-11w")
params["ieee80211w"] = "2"
hostapd.add_ap(apdev[1]['ifname'], params)
# Success cases with optional RSN IE fields removed one by one
tests = [ ("Normal wpa_supplicant assoc req RSN IE",
"30140100000fac040100000fac040100000fac010000"),
("Extra PMKIDCount field in RSN IE",
"30160100000fac040100000fac040100000fac0100000000"),
("Extra Group Management Cipher Suite in RSN IE",
"301a0100000fac040100000fac040100000fac0100000000000fac06"),
("Extra undefined extension field in RSN IE",
"301c0100000fac040100000fac040100000fac0100000000000fac061122"),
("RSN IE without RSN Capabilities",
"30120100000fac040100000fac040100000fac01"),
("RSN IE without AKM", "300c0100000fac040100000fac04"),
("RSN IE without pairwise", "30060100000fac04"),
("RSN IE without group", "30020100") ]
for title, ie in tests:
logger.info(title)
set_test_assoc_ie(dev[0], ie)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ ("Normal wpa_supplicant assoc req RSN IE",
"30140100000fac040100000fac040100000fac01cc00"),
("Group management cipher included in assoc req RSN IE",
"301a0100000fac040100000fac040100000fac01cc000000000fac06") ]
for title, ie in tests:
logger.info(title)
set_test_assoc_ie(dev[0], ie)
dev[0].connect("test-wpa2-eap-11w", key_mgmt="WPA-EAP", ieee80211w="1",
eap="GPSK", identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
tests = [ ("Invalid group cipher", "30060100000fac02", 41),
("Invalid pairwise cipher", "300c0100000fac040100000fac02", 42) ]
for title, ie, status in tests:
logger.info(title)
set_test_assoc_ie(dev[0], ie)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-ASSOC-REJECT"])
if ev is None:
raise Exception("Association rejection not reported")
if "status_code=" + str(status) not in ev:
raise Exception("Unexpected status code: " + ev)
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
tests = [ ("Management frame protection not enabled",
"30140100000fac040100000fac040100000fac010000", 31),
("Unsupported management group cipher",
"301a0100000fac040100000fac040100000fac01cc000000000fac0b", 31) ]
for title, ie, status in tests:
logger.info(title)
set_test_assoc_ie(dev[0], ie)
dev[0].connect("test-wpa2-eap-11w", key_mgmt="WPA-EAP", ieee80211w="1",
eap="GPSK", identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
scan_freq="2412", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-ASSOC-REJECT"])
if ev is None:
raise Exception("Association rejection not reported")
if "status_code=" + str(status) not in ev:
raise Exception("Unexpected status code: " + ev)
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
def test_eap_tls_ext_cert_check(dev, apdev):
"""EAP-TLS and external server certification validation"""
# With internal server certificate chain validation
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key",
phase1="tls_ext_cert_check=1", scan_freq="2412",
only_add_network=True)
run_ext_cert_check(dev, apdev, id)
def test_eap_ttls_ext_cert_check(dev, apdev):
"""EAP-TTLS and external server certification validation"""
# Without internal server certificate chain validation
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
phase1="tls_ext_cert_check=1", scan_freq="2412",
only_add_network=True)
run_ext_cert_check(dev, apdev, id)
def test_eap_peap_ext_cert_check(dev, apdev):
"""EAP-PEAP and external server certification validation"""
# With internal server certificate chain validation
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PEAP",
identity="user", anonymous_identity="peap",
ca_cert="auth_serv/ca.pem",
password="password", phase2="auth=MSCHAPV2",
phase1="tls_ext_cert_check=1", scan_freq="2412",
only_add_network=True)
run_ext_cert_check(dev, apdev, id)
def test_eap_fast_ext_cert_check(dev, apdev):
"""EAP-FAST and external server certification validation"""
check_eap_capa(dev[0], "FAST")
# With internal server certificate chain validation
dev[0].request("SET blob fast_pac_auth_ext ")
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
ca_cert="auth_serv/ca.pem",
password="password", phase2="auth=GTC",
phase1="tls_ext_cert_check=1 fast_provisioning=2",
pac_file="blob://fast_pac_auth_ext",
scan_freq="2412",
only_add_network=True)
run_ext_cert_check(dev, apdev, id)
def run_ext_cert_check(dev, apdev, net_id):
check_ext_cert_check_support(dev[0])
if not openssl_imported:
raise HwsimSkip("OpenSSL python method not available")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].select_network(net_id)
certs = {}
while True:
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PEER-CERT",
"CTRL-REQ-EXT_CERT_CHECK",
"CTRL-EVENT-EAP-SUCCESS"], timeout=10)
if ev is None:
raise Exception("No peer server certificate event seen")
if "CTRL-EVENT-EAP-PEER-CERT" in ev:
depth = None
cert = None
vals = ev.split(' ')
for v in vals:
if v.startswith("depth="):
depth = int(v.split('=')[1])
elif v.startswith("cert="):
cert = v.split('=')[1]
if depth is not None and cert:
certs[depth] = binascii.unhexlify(cert)
elif "CTRL-EVENT-EAP-SUCCESS" in ev:
raise Exception("Unexpected EAP-Success")
elif "CTRL-REQ-EXT_CERT_CHECK" in ev:
id = ev.split(':')[0].split('-')[-1]
break
if 0 not in certs:
raise Exception("Server certificate not received")
if 1 not in certs:
raise Exception("Server certificate issuer not received")
cert = OpenSSL.crypto.load_certificate(OpenSSL.crypto.FILETYPE_ASN1,
certs[0])
cn = cert.get_subject().commonName
logger.info("Server certificate CN=" + cn)
issuer = OpenSSL.crypto.load_certificate(OpenSSL.crypto.FILETYPE_ASN1,
certs[1])
icn = issuer.get_subject().commonName
logger.info("Issuer certificate CN=" + icn)
if cn != "server.w1.fi":
raise Exception("Unexpected server certificate CN: " + cn)
if icn != "Root CA":
raise Exception("Unexpected server certificate issuer CN: " + icn)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=0.1)
if ev:
raise Exception("Unexpected EAP-Success before external check result indication")
dev[0].request("CTRL-RSP-EXT_CERT_CHECK-" + id + ":good")
dev[0].wait_connected()
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
if "FAIL" in dev[0].request("PMKSA_FLUSH"):
raise Exception("PMKSA_FLUSH failed")
dev[0].request("SET blob fast_pac_auth_ext ")
dev[0].request("RECONNECT")
ev = dev[0].wait_event(["CTRL-REQ-EXT_CERT_CHECK"], timeout=10)
if ev is None:
raise Exception("No peer server certificate event seen (2)")
id = ev.split(':')[0].split('-')[-1]
dev[0].request("CTRL-RSP-EXT_CERT_CHECK-" + id + ":bad")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
if ev is None:
raise Exception("EAP-Failure not reported")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
Reference in a new issue View git blame Copy permalink