jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/src/ap/dfs.c
Jouni Malinen afbe57d981 DFS: Fix hostapd operation without hw_mode driver data 
If DFS implementation was built in, some configurations with drivers
that do not provide mode information could end up dereferencing a NULL
pointer. Fix this by skipping DFS operations in such cases since not
having information about modes and channels means that hostapd could not
perform DFS anyway (i.e., either this is not a wireless driver or the
driver takes care of DFS internally).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 01:14:35 +02:00

996 lines
25 KiB
C
Raw Blame History

/*
* DFS - Dynamic Frequency Selection
* Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
* Copyright (c) 2013, Qualcomm Atheros, Inc.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "hostapd.h"
#include "ap_drv_ops.h"
#include "drivers/driver.h"
#include "dfs.h"
static int dfs_get_used_n_chans(struct hostapd_iface *iface, int *seg1)
{
int n_chans = 1;
*seg1 = 0;
if (iface->conf->ieee80211n && iface->conf->secondary_channel)
n_chans = 2;
if (iface->conf->ieee80211ac) {
switch (iface->conf->vht_oper_chwidth) {
case VHT_CHANWIDTH_USE_HT:
break;
case VHT_CHANWIDTH_80MHZ:
n_chans = 4;
break;
case VHT_CHANWIDTH_160MHZ:
n_chans = 8;
break;
case VHT_CHANWIDTH_80P80MHZ:
n_chans = 4;
*seg1 = 4;
break;
default:
break;
}
}
return n_chans;
}
static int dfs_channel_available(struct hostapd_channel_data *chan,
int skip_radar)
{
/*
* When radar detection happens, CSA is performed. However, there's no
* time for CAC, so radar channels must be skipped when finding a new
* channel for CSA, unless they are available for immediate use.
*/
if (skip_radar && (chan->flag & HOSTAPD_CHAN_RADAR) &&
((chan->flag & HOSTAPD_CHAN_DFS_MASK) !=
HOSTAPD_CHAN_DFS_AVAILABLE))
return 0;
if (chan->flag & HOSTAPD_CHAN_DISABLED)
return 0;
if ((chan->flag & HOSTAPD_CHAN_RADAR) &&
((chan->flag & HOSTAPD_CHAN_DFS_MASK) ==
HOSTAPD_CHAN_DFS_UNAVAILABLE))
return 0;
return 1;
}
static int dfs_is_chan_allowed(struct hostapd_channel_data *chan, int n_chans)
{
/*
* The tables contain first valid channel number based on channel width.
* We will also choose this first channel as the control one.
*/
int allowed_40[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
184, 192 };
/*
* VHT80, valid channels based on center frequency:
* 42, 58, 106, 122, 138, 155
*/
int allowed_80[] = { 36, 52, 100, 116, 132, 149 };
/*
* VHT160 valid channels based on center frequency:
* 50, 114
*/
int allowed_160[] = { 36, 100 };
int *allowed = allowed_40;
unsigned int i, allowed_no = 0;
switch (n_chans) {
case 2:
allowed = allowed_40;
allowed_no = ARRAY_SIZE(allowed_40);
break;
case 4:
allowed = allowed_80;
allowed_no = ARRAY_SIZE(allowed_80);
break;
case 8:
allowed = allowed_160;
allowed_no = ARRAY_SIZE(allowed_160);
break;
default:
wpa_printf(MSG_DEBUG, "Unknown width for %d channels", n_chans);
break;
}
for (i = 0; i < allowed_no; i++) {
if (chan->chan == allowed[i])
return 1;
}
return 0;
}
static int dfs_chan_range_available(struct hostapd_hw_modes *mode,
int first_chan_idx, int num_chans,
int skip_radar)
{
struct hostapd_channel_data *first_chan, *chan;
int i;
if (first_chan_idx + num_chans >= mode->num_channels)
return 0;
first_chan = &mode->channels[first_chan_idx];
for (i = 0; i < num_chans; i++) {
chan = &mode->channels[first_chan_idx + i];
if (first_chan->freq + i * 20 != chan->freq)
return 0;
if (!dfs_channel_available(chan, skip_radar))
return 0;
}
return 1;
}
static int is_in_chanlist(struct hostapd_iface *iface,
struct hostapd_channel_data *chan)
{
int *entry;
if (!iface->conf->chanlist)
return 1;
for (entry = iface->conf->chanlist; *entry != -1; entry++) {
if (*entry == chan->chan)
return 1;
}
return 0;
}
/*
* The function assumes HT40+ operation.
* Make sure to adjust the following variables after calling this:
* - hapd->secondary_channel
* - hapd->vht_oper_centr_freq_seg0_idx
* - hapd->vht_oper_centr_freq_seg1_idx
*/
static int dfs_find_channel(struct hostapd_iface *iface,
struct hostapd_channel_data **ret_chan,
int idx, int skip_radar)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int i, channel_idx = 0, n_chans, n_chans1;
mode = iface->current_mode;
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
wpa_printf(MSG_DEBUG, "DFS new chan checking %d channels", n_chans);
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
/* Skip HT40/VHT incompatible channels */
if (iface->conf->ieee80211n &&
iface->conf->secondary_channel &&
!dfs_is_chan_allowed(chan, n_chans))
continue;
/* Skip incompatible chandefs */
if (!dfs_chan_range_available(mode, i, n_chans, skip_radar))
continue;
if (!is_in_chanlist(iface, chan))
continue;
if (ret_chan && idx == channel_idx) {
wpa_printf(MSG_DEBUG, "Selected ch. #%d", chan->chan);
*ret_chan = chan;
return idx;
}
wpa_printf(MSG_DEBUG, "Adding channel: %d", chan->chan);
channel_idx++;
}
return channel_idx;
}
static void dfs_adjust_vht_center_freq(struct hostapd_iface *iface,
struct hostapd_channel_data *chan,
int secondary_channel,
u8 *vht_oper_centr_freq_seg0_idx,
u8 *vht_oper_centr_freq_seg1_idx)
{
if (!iface->conf->ieee80211ac)
return;
if (!chan)
return;
*vht_oper_centr_freq_seg1_idx = 0;
switch (iface->conf->vht_oper_chwidth) {
case VHT_CHANWIDTH_USE_HT:
if (secondary_channel == 1)
*vht_oper_centr_freq_seg0_idx = chan->chan + 2;
else if (secondary_channel == -1)
*vht_oper_centr_freq_seg0_idx = chan->chan - 2;
else
*vht_oper_centr_freq_seg0_idx = chan->chan;
break;
case VHT_CHANWIDTH_80MHZ:
*vht_oper_centr_freq_seg0_idx = chan->chan + 6;
break;
case VHT_CHANWIDTH_160MHZ:
*vht_oper_centr_freq_seg0_idx = chan->chan + 14;
break;
default:
wpa_printf(MSG_INFO, "DFS only VHT20/40/80/160 is supported now");
*vht_oper_centr_freq_seg0_idx = 0;
break;
}
wpa_printf(MSG_DEBUG, "DFS adjusting VHT center frequency: %d, %d",
*vht_oper_centr_freq_seg0_idx,
*vht_oper_centr_freq_seg1_idx);
}
/* Return start channel idx we will use for mode->channels[idx] */
static int dfs_get_start_chan_idx(struct hostapd_iface *iface, int *seg1_start)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int channel_no = iface->conf->channel;
int res = -1, i;
int chan_seg1 = -1;
*seg1_start = -1;
/* HT40- */
if (iface->conf->ieee80211n && iface->conf->secondary_channel == -1)
channel_no -= 4;
/* VHT */
if (iface->conf->ieee80211ac) {
switch (iface->conf->vht_oper_chwidth) {
case VHT_CHANWIDTH_USE_HT:
break;
case VHT_CHANWIDTH_80MHZ:
channel_no =
iface->conf->vht_oper_centr_freq_seg0_idx - 6;
break;
case VHT_CHANWIDTH_160MHZ:
channel_no =
iface->conf->vht_oper_centr_freq_seg0_idx - 14;
break;
case VHT_CHANWIDTH_80P80MHZ:
channel_no =
iface->conf->vht_oper_centr_freq_seg0_idx - 6;
chan_seg1 =
iface->conf->vht_oper_centr_freq_seg1_idx - 6;
break;
default:
wpa_printf(MSG_INFO,
"DFS only VHT20/40/80/160/80+80 is supported now");
channel_no = -1;
break;
}
}
/* Get idx */
mode = iface->current_mode;
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
if (chan->chan == channel_no) {
res = i;
break;
}
}
if (res != -1 && chan_seg1 > -1) {
int found = 0;
/* Get idx for seg1 */
mode = iface->current_mode;
for (i = 0; i < mode->num_channels; i++) {
chan = &mode->channels[i];
if (chan->chan == chan_seg1) {
*seg1_start = i;
found = 1;
break;
}
}
if (!found)
res = -1;
}
if (res == -1) {
wpa_printf(MSG_DEBUG,
"DFS chan_idx seems wrong; num-ch: %d ch-no: %d conf-ch-no: %d 11n: %d sec-ch: %d vht-oper-width: %d",
mode->num_channels, channel_no, iface->conf->channel,
iface->conf->ieee80211n,
iface->conf->secondary_channel,
iface->conf->vht_oper_chwidth);
for (i = 0; i < mode->num_channels; i++) {
wpa_printf(MSG_DEBUG, "Available channel: %d",
mode->channels[i].chan);
}
}
return res;
}
/* At least one channel have radar flag */
static int dfs_check_chans_radar(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i, res = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_RADAR)
res++;
}
return res;
}
/* All channels available */
static int dfs_check_chans_available(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_DISABLED)
break;
if (!(channel->flag & HOSTAPD_CHAN_RADAR))
continue;
if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) !=
HOSTAPD_CHAN_DFS_AVAILABLE)
break;
}
return i == n_chans;
}
/* At least one channel unavailable */
static int dfs_check_chans_unavailable(struct hostapd_iface *iface,
int start_chan_idx,
int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i, res = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (channel->flag & HOSTAPD_CHAN_DISABLED)
res++;
if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) ==
HOSTAPD_CHAN_DFS_UNAVAILABLE)
res++;
}
return res;
}
static struct hostapd_channel_data *
dfs_get_valid_channel(struct hostapd_iface *iface,
int *secondary_channel,
u8 *vht_oper_centr_freq_seg0_idx,
u8 *vht_oper_centr_freq_seg1_idx,
int skip_radar)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan = NULL;
int num_available_chandefs;
int chan_idx;
u32 _rand;
wpa_printf(MSG_DEBUG, "DFS: Selecting random channel");
*secondary_channel = 0;
*vht_oper_centr_freq_seg0_idx = 0;
*vht_oper_centr_freq_seg1_idx = 0;
if (iface->current_mode == NULL)
return NULL;
mode = iface->current_mode;
if (mode->mode != HOSTAPD_MODE_IEEE80211A)
return NULL;
/* Get the count first */
num_available_chandefs = dfs_find_channel(iface, NULL, 0, skip_radar);
if (num_available_chandefs == 0)
return NULL;
if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
_rand = os_random();
chan_idx = _rand % num_available_chandefs;
dfs_find_channel(iface, &chan, chan_idx, skip_radar);
/* dfs_find_channel() calculations assume HT40+ */
if (iface->conf->secondary_channel)
*secondary_channel = 1;
else
*secondary_channel = 0;
dfs_adjust_vht_center_freq(iface, chan,
*secondary_channel,
vht_oper_centr_freq_seg0_idx,
vht_oper_centr_freq_seg1_idx);
return chan;
}
static int set_dfs_state_freq(struct hostapd_iface *iface, int freq, u32 state)
{
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan = NULL;
int i;
mode = iface->current_mode;
if (mode == NULL)
return 0;
wpa_printf(MSG_DEBUG, "set_dfs_state 0x%X for %d MHz", state, freq);
for (i = 0; i < iface->current_mode->num_channels; i++) {
chan = &iface->current_mode->channels[i];
if (chan->freq == freq) {
if (chan->flag & HOSTAPD_CHAN_RADAR) {
chan->flag &= ~HOSTAPD_CHAN_DFS_MASK;
chan->flag |= state;
return 1; /* Channel found */
}
}
}
wpa_printf(MSG_WARNING, "Can't set DFS state for freq %d MHz", freq);
return 0;
}
static int set_dfs_state(struct hostapd_iface *iface, int freq, int ht_enabled,
int chan_offset, int chan_width, int cf1,
int cf2, u32 state)
{
int n_chans = 1, i;
struct hostapd_hw_modes *mode;
int frequency = freq;
int ret = 0;
mode = iface->current_mode;
if (mode == NULL)
return 0;
if (mode->mode != HOSTAPD_MODE_IEEE80211A) {
wpa_printf(MSG_WARNING, "current_mode != IEEE80211A");
return 0;
}
/* Seems cf1 and chan_width is enough here */
switch (chan_width) {
case CHAN_WIDTH_20_NOHT:
case CHAN_WIDTH_20:
n_chans = 1;
if (frequency == 0)
frequency = cf1;
break;
case CHAN_WIDTH_40:
n_chans = 2;
frequency = cf1 - 10;
break;
case CHAN_WIDTH_80:
n_chans = 4;
frequency = cf1 - 30;
break;
case CHAN_WIDTH_160:
n_chans = 8;
frequency = cf1 - 70;
break;
default:
wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
chan_width);
break;
}
wpa_printf(MSG_DEBUG, "DFS freq: %dMHz, n_chans: %d", frequency,
n_chans);
for (i = 0; i < n_chans; i++) {
ret += set_dfs_state_freq(iface, frequency, state);
frequency = frequency + 20;
}
return ret;
}
static int dfs_are_channels_overlapped(struct hostapd_iface *iface, int freq,
int chan_width, int cf1, int cf2)
{
int start_chan_idx, start_chan_idx1;
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *chan;
int n_chans, n_chans1, i, j, frequency = freq, radar_n_chans = 1;
u8 radar_chan;
int res = 0;
/* Our configuration */
mode = iface->current_mode;
start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Check we are on DFS channel(s) */
if (!dfs_check_chans_radar(iface, start_chan_idx, n_chans))
return 0;
/* Reported via radar event */
switch (chan_width) {
case CHAN_WIDTH_20_NOHT:
case CHAN_WIDTH_20:
radar_n_chans = 1;
if (frequency == 0)
frequency = cf1;
break;
case CHAN_WIDTH_40:
radar_n_chans = 2;
frequency = cf1 - 10;
break;
case CHAN_WIDTH_80:
radar_n_chans = 4;
frequency = cf1 - 30;
break;
case CHAN_WIDTH_160:
radar_n_chans = 8;
frequency = cf1 - 70;
break;
default:
wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
chan_width);
break;
}
ieee80211_freq_to_chan(frequency, &radar_chan);
for (i = 0; i < n_chans; i++) {
chan = &mode->channels[start_chan_idx + i];
if (!(chan->flag & HOSTAPD_CHAN_RADAR))
continue;
for (j = 0; j < radar_n_chans; j++) {
wpa_printf(MSG_DEBUG, "checking our: %d, radar: %d",
chan->chan, radar_chan + j * 4);
if (chan->chan == radar_chan + j * 4)
res++;
}
}
wpa_printf(MSG_DEBUG, "overlapped: %d", res);
return res;
}
static unsigned int dfs_get_cac_time(struct hostapd_iface *iface,
int start_chan_idx, int n_chans)
{
struct hostapd_channel_data *channel;
struct hostapd_hw_modes *mode;
int i;
unsigned int cac_time_ms = 0;
mode = iface->current_mode;
for (i = 0; i < n_chans; i++) {
channel = &mode->channels[start_chan_idx + i];
if (!(channel->flag & HOSTAPD_CHAN_RADAR))
continue;
if (channel->dfs_cac_ms > cac_time_ms)
cac_time_ms = channel->dfs_cac_ms;
}
return cac_time_ms;
}
/*
* Main DFS handler
* 1 - continue channel/ap setup
* 0 - channel/ap setup will be continued after CAC
* -1 - hit critical error
*/
int hostapd_handle_dfs(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int res, n_chans, n_chans1, start_chan_idx, start_chan_idx1;
int skip_radar = 0;
if (!iface->current_mode) {
/*
* This can happen with drivers that do not provide mode
* information and as such, cannot really use hostapd for DFS.
*/
wpa_printf(MSG_DEBUG,
"DFS: No current_mode information - assume no need to perform DFS operations by hostapd");
return 1;
}
iface->cac_started = 0;
do {
/* Get start (first) channel for current configuration */
start_chan_idx = dfs_get_start_chan_idx(iface,
&start_chan_idx1);
if (start_chan_idx == -1)
return -1;
/* Get number of used channels, depend on width */
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Setup CAC time */
iface->dfs_cac_ms = dfs_get_cac_time(iface, start_chan_idx,
n_chans);
/* Check if any of configured channels require DFS */
res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
wpa_printf(MSG_DEBUG,
"DFS %d channels required radar detection",
res);
if (!res)
return 1;
/* Check if all channels are DFS available */
res = dfs_check_chans_available(iface, start_chan_idx, n_chans);
wpa_printf(MSG_DEBUG,
"DFS all channels available, (SKIP CAC): %s",
res ? "yes" : "no");
if (res)
return 1;
/* Check if any of configured channels is unavailable */
res = dfs_check_chans_unavailable(iface, start_chan_idx,
n_chans);
wpa_printf(MSG_DEBUG, "DFS %d chans unavailable - choose other channel: %s",
res, res ? "yes": "no");
if (res) {
int sec = 0;
u8 cf1 = 0, cf2 = 0;
channel = dfs_get_valid_channel(iface, &sec, &cf1, &cf2,
skip_radar);
if (!channel) {
wpa_printf(MSG_ERROR, "could not get valid channel");
return -1;
}
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = sec;
iface->conf->vht_oper_centr_freq_seg0_idx = cf1;
iface->conf->vht_oper_centr_freq_seg1_idx = cf2;
}
} while (res);
/* Finally start CAC */
hostapd_set_state(iface, HAPD_IFACE_DFS);
wpa_printf(MSG_DEBUG, "DFS start CAC on %d MHz", iface->freq);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
"freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds",
iface->freq,
iface->conf->channel, iface->conf->secondary_channel,
iface->conf->vht_oper_chwidth,
iface->conf->vht_oper_centr_freq_seg0_idx,
iface->conf->vht_oper_centr_freq_seg1_idx,
iface->dfs_cac_ms / 1000);
res = hostapd_start_dfs_cac(iface, iface->conf->hw_mode,
iface->freq,
iface->conf->channel,
iface->conf->ieee80211n,
iface->conf->ieee80211ac,
iface->conf->secondary_channel,
iface->conf->vht_oper_chwidth,
iface->conf->vht_oper_centr_freq_seg0_idx,
iface->conf->vht_oper_centr_freq_seg1_idx);
if (res) {
wpa_printf(MSG_ERROR, "DFS start_dfs_cac() failed, %d", res);
return -1;
}
return 0;
}
int hostapd_dfs_complete_cac(struct hostapd_iface *iface, int success, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_COMPLETED
"success=%d freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
success, freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
if (success) {
/* Complete iface/ap configuration */
set_dfs_state(iface, freq, ht_enabled, chan_offset,
chan_width, cf1, cf2,
HOSTAPD_CHAN_DFS_AVAILABLE);
iface->cac_started = 0;
hostapd_setup_interface_complete(iface, 0);
}
return 0;
}
static int hostapd_dfs_start_channel_switch_cac(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int secondary_channel;
u8 vht_oper_centr_freq_seg0_idx = 0;
u8 vht_oper_centr_freq_seg1_idx = 0;
int skip_radar = 0;
int err = 1;
/* Radar detected during active CAC */
iface->cac_started = 0;
channel = dfs_get_valid_channel(iface, &secondary_channel,
&vht_oper_centr_freq_seg0_idx,
&vht_oper_centr_freq_seg1_idx,
skip_radar);
if (!channel) {
wpa_printf(MSG_ERROR, "No valid channel available");
hostapd_setup_interface_complete(iface, err);
return err;
}
wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
channel->chan);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
"freq=%d chan=%d sec_chan=%d", channel->freq,
channel->chan, secondary_channel);
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
iface->conf->vht_oper_centr_freq_seg0_idx =
vht_oper_centr_freq_seg0_idx;
iface->conf->vht_oper_centr_freq_seg1_idx =
vht_oper_centr_freq_seg1_idx;
err = 0;
hostapd_setup_interface_complete(iface, err);
return err;
}
static int hostapd_csa_in_progress(struct hostapd_iface *iface)
{
unsigned int i;
for (i = 0; i < iface->num_bss; i++)
if (iface->bss[i]->csa_in_progress)
return 1;
return 0;
}
static int hostapd_dfs_start_channel_switch(struct hostapd_iface *iface)
{
struct hostapd_channel_data *channel;
int secondary_channel;
u8 vht_oper_centr_freq_seg0_idx;
u8 vht_oper_centr_freq_seg1_idx;
int skip_radar = 1;
struct csa_settings csa_settings;
unsigned int i;
int err = 1;
wpa_printf(MSG_DEBUG, "%s called (CAC active: %s, CSA active: %s)",
__func__, iface->cac_started ? "yes" : "no",
hostapd_csa_in_progress(iface) ? "yes" : "no");
/* Check if CSA in progress */
if (hostapd_csa_in_progress(iface))
return 0;
/* Check if active CAC */
if (iface->cac_started)
return hostapd_dfs_start_channel_switch_cac(iface);
/* Perform channel switch/CSA */
channel = dfs_get_valid_channel(iface, &secondary_channel,
&vht_oper_centr_freq_seg0_idx,
&vht_oper_centr_freq_seg1_idx,
skip_radar);
if (!channel) {
/*
* If there is no channel to switch immediately to, check if
* there is another channel where we can switch even if it
* requires to perform a CAC first.
*/
skip_radar = 0;
channel = dfs_get_valid_channel(iface, &secondary_channel,
&vht_oper_centr_freq_seg0_idx,
&vht_oper_centr_freq_seg1_idx,
skip_radar);
if (!channel) {
/* FIXME: Wait for channel(s) to become available */
hostapd_disable_iface(iface);
return err;
}
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
iface->conf->vht_oper_centr_freq_seg0_idx =
vht_oper_centr_freq_seg0_idx;
iface->conf->vht_oper_centr_freq_seg1_idx =
vht_oper_centr_freq_seg1_idx;
hostapd_disable_iface(iface);
hostapd_enable_iface(iface);
return 0;
}
wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
channel->chan);
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
"freq=%d chan=%d sec_chan=%d", channel->freq,
channel->chan, secondary_channel);
/* Setup CSA request */
os_memset(&csa_settings, 0, sizeof(csa_settings));
csa_settings.cs_count = 5;
csa_settings.block_tx = 1;
err = hostapd_set_freq_params(&csa_settings.freq_params,
iface->conf->hw_mode,
channel->freq,
channel->chan,
iface->conf->ieee80211n,
iface->conf->ieee80211ac,
secondary_channel,
iface->conf->vht_oper_chwidth,
vht_oper_centr_freq_seg0_idx,
vht_oper_centr_freq_seg1_idx,
iface->current_mode->vht_capab);
if (err) {
wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
hostapd_disable_iface(iface);
return err;
}
for (i = 0; i < iface->num_bss; i++) {
err = hostapd_switch_channel(iface->bss[i], &csa_settings);
if (err)
break;
}
if (err) {
wpa_printf(MSG_WARNING, "DFS failed to schedule CSA (%d) - trying fallback",
err);
iface->freq = channel->freq;
iface->conf->channel = channel->chan;
iface->conf->secondary_channel = secondary_channel;
iface->conf->vht_oper_centr_freq_seg0_idx =
vht_oper_centr_freq_seg0_idx;
iface->conf->vht_oper_centr_freq_seg1_idx =
vht_oper_centr_freq_seg1_idx;
hostapd_disable_iface(iface);
hostapd_enable_iface(iface);
return 0;
}
/* Channel configuration will be updated once CSA completes and
* ch_switch_notify event is received */
wpa_printf(MSG_DEBUG, "DFS waiting channel switch event");
return 0;
}
int hostapd_dfs_radar_detected(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
int res;
if (!iface->conf->ieee80211h)
return 0;
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_RADAR_DETECTED
"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
/* mark radar frequency as invalid */
set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
cf1, cf2, HOSTAPD_CHAN_DFS_UNAVAILABLE);
/* Skip if reported radar event not overlapped our channels */
res = dfs_are_channels_overlapped(iface, freq, chan_width, cf1, cf2);
if (!res)
return 0;
/* radar detected while operating, switch the channel. */
res = hostapd_dfs_start_channel_switch(iface);
return res;
}
int hostapd_dfs_nop_finished(struct hostapd_iface *iface, int freq,
int ht_enabled, int chan_offset, int chan_width,
int cf1, int cf2)
{
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NOP_FINISHED
"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
/* TODO add correct implementation here */
set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
cf1, cf2, HOSTAPD_CHAN_DFS_USABLE);
return 0;
}
int hostapd_is_dfs_required(struct hostapd_iface *iface)
{
int n_chans, n_chans1, start_chan_idx, start_chan_idx1, res;
if (!iface->conf->ieee80211h || !iface->current_mode ||
iface->current_mode->mode != HOSTAPD_MODE_IEEE80211A)
return 0;
/* Get start (first) channel for current configuration */
start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
if (start_chan_idx == -1)
return -1;
/* Get number of used channels, depend on width */
n_chans = dfs_get_used_n_chans(iface, &n_chans1);
/* Check if any of configured channels require DFS */
res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
if (res)
return res;
if (start_chan_idx1 >= 0 && n_chans1 > 0)
res = dfs_check_chans_radar(iface, start_chan_idx1, n_chans1);
return res;
}
Reference in a new issue View git blame Copy permalink