9f47fdb6c3
The RECONNECT command on the station was issued immediately after wpa_supplicant had processed EAPOL-Key msg 3/4. This could happen before hostapd has processed EAPOL-Key msg 4/4 and especially with UML time-travel, this could result in the following FT protocol exchange going through in a manner that makes the hostapd process EAPOL-Key msg 4/4 from the first association as a postponed EAPOL RX at the beginning of the second association. Avoid this by waiting hostapd to report completion of the connection before issuing RECONNECT. Signed-off-by: Jouni Malinen <j@w1.fi>
3065 lines
120 KiB
Python
3065 lines
120 KiB
Python
# Fast BSS Transition tests
|
|
# Copyright (c) 2013-2019, Jouni Malinen <j@w1.fi>
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
from remotehost import remote_compatible
|
|
import binascii
|
|
import os
|
|
import time
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import signal
|
|
import struct
|
|
import subprocess
|
|
|
|
import hwsim_utils
|
|
from hwsim import HWSimRadio
|
|
import hostapd
|
|
from tshark import run_tshark
|
|
from utils import HwsimSkip, alloc_fail, fail_test, wait_fail_trigger, skip_with_fips, parse_ie
|
|
from wlantest import Wlantest
|
|
from test_ap_psk import check_mib, find_wpas_process, read_process_memory, verify_not_present, get_key_locations
|
|
from test_rrm import check_beacon_req
|
|
from test_suite_b import check_suite_b_192_capa
|
|
|
|
def ft_base_rsn():
|
|
params = {"wpa": "2",
|
|
"wpa_key_mgmt": "FT-PSK",
|
|
"rsn_pairwise": "CCMP"}
|
|
return params
|
|
|
|
def ft_base_mixed():
|
|
params = {"wpa": "3",
|
|
"wpa_key_mgmt": "WPA-PSK FT-PSK",
|
|
"wpa_pairwise": "TKIP",
|
|
"rsn_pairwise": "CCMP"}
|
|
return params
|
|
|
|
def ft_params(rsn=True, ssid=None, passphrase=None):
|
|
if rsn:
|
|
params = ft_base_rsn()
|
|
else:
|
|
params = ft_base_mixed()
|
|
if ssid:
|
|
params["ssid"] = ssid
|
|
if passphrase:
|
|
params["wpa_passphrase"] = passphrase
|
|
|
|
params["mobility_domain"] = "a1b2"
|
|
params["r0_key_lifetime"] = "10000"
|
|
params["pmk_r1_push"] = "1"
|
|
params["reassociation_deadline"] = "1000"
|
|
return params
|
|
|
|
def ft_params1a(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas1.w1.fi"
|
|
params['r1_key_holder'] = "000102030405"
|
|
return params
|
|
|
|
def ft_params1(rsn=True, ssid=None, passphrase=None, discovery=False):
|
|
params = ft_params1a(rsn, ssid, passphrase)
|
|
if discovery:
|
|
params['r0kh'] = "ff:ff:ff:ff:ff:ff * 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f"
|
|
params['r1kh'] = "00:00:00:00:00:00 00:00:00:00:00:00 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f"
|
|
else:
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 300102030405060708090a0b0c0d0e0f300102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "02:00:00:00:04:00 00:01:02:03:04:06 200102030405060708090a0b0c0d0e0f200102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params1_old_key(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params1a(rsn, ssid, passphrase)
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 100102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 300102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "02:00:00:00:04:00 00:01:02:03:04:06 200102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params2a(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
return params
|
|
|
|
def ft_params2(rsn=True, ssid=None, passphrase=None, discovery=False):
|
|
params = ft_params2a(rsn, ssid, passphrase)
|
|
if discovery:
|
|
params['r0kh'] = "ff:ff:ff:ff:ff:ff * 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f"
|
|
params['r1kh'] = "00:00:00:00:00:00 00:00:00:00:00:00 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f"
|
|
else:
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0e0f200102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "02:00:00:00:03:00 00:01:02:03:04:05 300102030405060708090a0b0c0d0e0f300102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params2_old_key(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params2a(rsn, ssid, passphrase)
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "02:00:00:00:03:00 00:01:02:03:04:05 300102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params1_r0kh_mismatch(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas1.w1.fi"
|
|
params['r1_key_holder'] = "000102030405"
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 100102030405060708090a0b0c0d0e0f100102030405060708090a0b0c0d0e0f",
|
|
"12:00:00:00:04:00 nas2.w1.fi 300102030405060708090a0b0c0d0e0f300102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "12:00:00:00:04:00 10:01:02:03:04:06 200102030405060708090a0b0c0d0e0f200102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params2_incorrect_rrb_key(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params['r0kh'] = ["02:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0ef1200102030405060708090a0b0c0d0ef1",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0ef2000102030405060708090a0b0c0d0ef2"]
|
|
params['r1kh'] = "02:00:00:00:03:00 00:01:02:03:04:05 300102030405060708090a0b0c0d0ef3300102030405060708090a0b0c0d0ef3"
|
|
return params
|
|
|
|
def ft_params2_r0kh_mismatch(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params['r0kh'] = ["12:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0e0f200102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f"]
|
|
params['r1kh'] = "12:00:00:00:03:00 10:01:02:03:04:05 300102030405060708090a0b0c0d0e0f300102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def run_roams(dev, apdev, hapd0, hapd1, ssid, passphrase, over_ds=False,
|
|
sae=False, eap=False, fail_test=False, roams=1,
|
|
pairwise_cipher="CCMP", group_cipher="TKIP CCMP", ptk_rekey="0",
|
|
test_connectivity=True, eap_identity="gpsk user", conndev=False,
|
|
force_initial_conn_to_first_ap=False, sha384=False,
|
|
group_mgmt=None, ocv=None, sae_password=None,
|
|
sae_password_id=None, sae_and_psk=False, pmksa_caching=False,
|
|
roam_with_reassoc=False, also_non_ft=False, only_one_way=False,
|
|
wait_before_roam=0, return_after_initial=False, ieee80211w="1"):
|
|
logger.info("Connect to first AP")
|
|
|
|
copts = {}
|
|
copts["proto"] = "WPA2"
|
|
copts["ieee80211w"] = ieee80211w
|
|
copts["scan_freq"] = "2412"
|
|
copts["pairwise"] = pairwise_cipher
|
|
copts["group"] = group_cipher
|
|
copts["wpa_ptk_rekey"] = ptk_rekey
|
|
if group_mgmt:
|
|
copts["group_mgmt"] = group_mgmt
|
|
if ocv:
|
|
copts["ocv"] = ocv
|
|
if eap:
|
|
if pmksa_caching:
|
|
copts["ft_eap_pmksa_caching"] = "1"
|
|
if also_non_ft:
|
|
copts["key_mgmt"] = "WPA-EAP-SUITE-B-192 FT-EAP-SHA384" if sha384 else "WPA-EAP FT-EAP"
|
|
else:
|
|
copts["key_mgmt"] = "FT-EAP-SHA384" if sha384 else "FT-EAP"
|
|
copts["eap"] = "GPSK"
|
|
copts["identity"] = eap_identity
|
|
copts["password"] = "abcdefghijklmnop0123456789abcdef"
|
|
else:
|
|
if sae:
|
|
copts["key_mgmt"] = "SAE FT-SAE" if sae_and_psk else "FT-SAE"
|
|
else:
|
|
copts["key_mgmt"] = "FT-PSK"
|
|
if passphrase:
|
|
copts["psk"] = passphrase
|
|
if sae_password:
|
|
copts["sae_password"] = sae_password
|
|
if sae_password_id:
|
|
copts["sae_password_id"] = sae_password_id
|
|
if force_initial_conn_to_first_ap:
|
|
copts["bssid"] = apdev[0]['bssid']
|
|
netw = dev.connect(ssid, **copts)
|
|
if pmksa_caching:
|
|
if dev.get_status_field('bssid') == apdev[0]['bssid']:
|
|
hapd0.wait_sta()
|
|
else:
|
|
hapd1.wait_sta()
|
|
dev.request("DISCONNECT")
|
|
dev.wait_disconnected()
|
|
dev.request("RECONNECT")
|
|
ev = dev.wait_event(["CTRL-EVENT-CONNECTED",
|
|
"CTRL-EVENT-DISCONNECTED",
|
|
"CTRL-EVENT-EAP-STARTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("Reconnect timed out")
|
|
if "CTRL-EVENT-DISCONNECTED" in ev:
|
|
raise Exception("Unexpected disconnection after RECONNECT")
|
|
if "CTRL-EVENT-EAP-STARTED" in ev:
|
|
raise Exception("Unexpected EAP start after RECONNECT")
|
|
|
|
if dev.get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap1 = apdev[0]
|
|
ap2 = apdev[1]
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
ap1 = apdev[1]
|
|
ap2 = apdev[0]
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
if test_connectivity:
|
|
hapd1ap.wait_sta()
|
|
if conndev:
|
|
hwsim_utils.test_connectivity_iface(dev, hapd1ap, conndev)
|
|
else:
|
|
hwsim_utils.test_connectivity(dev, hapd1ap)
|
|
|
|
if return_after_initial:
|
|
return ap2['bssid']
|
|
|
|
if wait_before_roam:
|
|
time.sleep(wait_before_roam)
|
|
dev.scan_for_bss(ap2['bssid'], freq="2412")
|
|
|
|
for i in range(0, roams):
|
|
# Roaming artificially fast can make data test fail because the key is
|
|
# set later.
|
|
time.sleep(0.01)
|
|
logger.info("Roam to the second AP")
|
|
if roam_with_reassoc:
|
|
dev.set_network(netw, "bssid", ap2['bssid'])
|
|
dev.request("REASSOCIATE")
|
|
dev.wait_connected()
|
|
elif over_ds:
|
|
dev.roam_over_ds(ap2['bssid'], fail_test=fail_test)
|
|
else:
|
|
dev.roam(ap2['bssid'], fail_test=fail_test)
|
|
if fail_test:
|
|
return
|
|
if dev.get_status_field('bssid') != ap2['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
if (i == 0 or i == roams - 1) and test_connectivity:
|
|
hapd2ap.wait_sta()
|
|
if conndev:
|
|
hwsim_utils.test_connectivity_iface(dev, hapd2ap, conndev)
|
|
else:
|
|
hwsim_utils.test_connectivity(dev, hapd2ap)
|
|
|
|
if only_one_way:
|
|
return
|
|
# Roaming artificially fast can make data test fail because the key is
|
|
# set later.
|
|
time.sleep(0.01)
|
|
logger.info("Roam back to the first AP")
|
|
if roam_with_reassoc:
|
|
dev.set_network(netw, "bssid", ap1['bssid'])
|
|
dev.request("REASSOCIATE")
|
|
dev.wait_connected()
|
|
elif over_ds:
|
|
dev.roam_over_ds(ap1['bssid'])
|
|
else:
|
|
dev.roam(ap1['bssid'])
|
|
if dev.get_status_field('bssid') != ap1['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
if (i == 0 or i == roams - 1) and test_connectivity:
|
|
hapd1ap.wait_sta()
|
|
if conndev:
|
|
hwsim_utils.test_connectivity_iface(dev, hapd1ap, conndev)
|
|
else:
|
|
hwsim_utils.test_connectivity(dev, hapd1ap)
|
|
|
|
def test_ap_ft(dev, apdev):
|
|
"""WPA2-PSK-FT AP"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_old_key(dev, apdev):
|
|
"""WPA2-PSK-FT AP (old key)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1_old_key(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_old_key(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
|
|
def test_ap_ft_multi_akm(dev, apdev):
|
|
"""WPA2-PSK-FT AP with non-FT AKMs enabled"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["wpa_key_mgmt"] = "FT-PSK WPA-PSK WPA-PSK-SHA256"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["wpa_key_mgmt"] = "FT-PSK WPA-PSK WPA-PSK-SHA256"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
Wlantest.setup(hapd0)
|
|
wt = Wlantest()
|
|
wt.flush()
|
|
wt.add_passphrase(passphrase)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
if "[WPA2-PSK+FT/PSK+PSK-SHA256-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
dev[1].connect(ssid, psk=passphrase, scan_freq="2412")
|
|
dev[2].connect(ssid, psk=passphrase, key_mgmt="WPA-PSK-SHA256",
|
|
scan_freq="2412")
|
|
|
|
def test_ap_ft_local_key_gen(dev, apdev):
|
|
"""WPA2-PSK-FT AP with local key generation (without pull/push)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1a(ssid=ssid, passphrase=passphrase)
|
|
params['ft_psk_generate_local'] = "1"
|
|
del params['pmk_r1_push']
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2a(ssid=ssid, passphrase=passphrase)
|
|
params['ft_psk_generate_local'] = "1"
|
|
del params['pmk_r1_push']
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_vlan(dev, apdev):
|
|
"""WPA2-PSK-FT AP with VLAN"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1")
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_vlan_disconnected(dev, apdev):
|
|
"""WPA2-PSK-FT AP with VLAN and local key generation"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1a(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
params['ft_psk_generate_local'] = "1"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
params = ft_params2a(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
params['ft_psk_generate_local'] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1")
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_vlan_2(dev, apdev):
|
|
"""WPA2-PSK-FT AP with VLAN and dest-AP does not have VLAN info locally"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1",
|
|
force_initial_conn_to_first_ap=True)
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_many(dev, apdev):
|
|
"""WPA2-PSK-FT AP multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, roams=50)
|
|
|
|
def test_ap_ft_many_vlan(dev, apdev):
|
|
"""WPA2-PSK-FT AP with VLAN multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, roams=50,
|
|
conndev="brvlan1")
|
|
|
|
def test_ap_ft_mixed(dev, apdev):
|
|
"""WPA2-PSK-FT mixed-mode AP"""
|
|
ssid = "test-ft-mixed"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(rsn=False, ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
vals = key_mgmt.split(' ')
|
|
if vals[0] != "WPA-PSK" or vals[1] != "FT-PSK":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(rsn=False, ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase)
|
|
|
|
def test_ap_ft_pmf(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF"""
|
|
run_ap_ft_pmf(dev, apdev, "1")
|
|
|
|
def test_ap_ft_pmf_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF (over DS)"""
|
|
run_ap_ft_pmf(dev, apdev, "1", over_ds=True)
|
|
|
|
def test_ap_ft_pmf_required(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF required on STA"""
|
|
run_ap_ft_pmf(dev, apdev, "2")
|
|
|
|
def test_ap_ft_pmf_required_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF required on STA (over DS)"""
|
|
run_ap_ft_pmf(dev, apdev, "2", over_ds=True)
|
|
|
|
def run_ap_ft_pmf(dev, apdev, ieee80211w, over_ds=False):
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
Wlantest.setup(hapd0)
|
|
wt = Wlantest()
|
|
wt.flush()
|
|
wt.add_passphrase(passphrase)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
ieee80211w=ieee80211w, over_ds=over_ds)
|
|
|
|
def test_ap_ft_pmf_required_mismatch(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF required on STA but AP2 not enabling PMF"""
|
|
run_ap_ft_pmf_required_mismatch(dev, apdev)
|
|
|
|
def test_ap_ft_pmf_required_mismatch_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF required on STA but AP2 not enabling PMF (over DS)"""
|
|
run_ap_ft_pmf_required_mismatch(dev, apdev, over_ds=True)
|
|
|
|
def run_ap_ft_pmf_required_mismatch(dev, apdev, over_ds=False):
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, ieee80211w="2",
|
|
force_initial_conn_to_first_ap=True, fail_test=True,
|
|
over_ds=over_ds)
|
|
|
|
def test_ap_ft_pmf_bip_cmac_128(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF/BIP-CMAC-128"""
|
|
run_ap_ft_pmf_bip(dev, apdev, "AES-128-CMAC")
|
|
|
|
def test_ap_ft_pmf_bip_gmac_128(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF/BIP-GMAC-128"""
|
|
run_ap_ft_pmf_bip(dev, apdev, "BIP-GMAC-128")
|
|
|
|
def test_ap_ft_pmf_bip_gmac_256(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF/BIP-GMAC-256"""
|
|
run_ap_ft_pmf_bip(dev, apdev, "BIP-GMAC-256")
|
|
|
|
def test_ap_ft_pmf_bip_cmac_256(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF/BIP-CMAC-256"""
|
|
run_ap_ft_pmf_bip(dev, apdev, "BIP-CMAC-256")
|
|
|
|
def run_ap_ft_pmf_bip(dev, apdev, cipher):
|
|
if cipher not in dev[0].get_capability("group_mgmt"):
|
|
raise HwsimSkip("Cipher %s not supported" % cipher)
|
|
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["group_mgmt_cipher"] = cipher
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["group_mgmt_cipher"] = cipher
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
group_mgmt=cipher)
|
|
|
|
def test_ap_ft_ocv(dev, apdev):
|
|
"""WPA2-PSK-FT AP with OCV"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["ocv"] = "1"
|
|
try:
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
except Exception as e:
|
|
if "Failed to set hostapd parameter ocv" in str(e):
|
|
raise HwsimSkip("OCV not supported")
|
|
raise
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["ocv"] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, ocv="1")
|
|
|
|
def test_ap_ft_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
check_mib(dev[0], [("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-4"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-4")])
|
|
|
|
def cleanup_ap_ft_separate_hostapd():
|
|
subprocess.call(["brctl", "delif", "br0ft", "veth0"],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(["brctl", "delif", "br1ft", "veth1"],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(["ip", "link", "del", "veth0"],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(["ip", "link", "del", "veth1"],
|
|
stderr=open('/dev/null', 'w'))
|
|
for ifname in ['br0ft', 'br1ft', 'br-ft']:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', ifname, 'down'],
|
|
stderr=open('/dev/null', 'w'))
|
|
subprocess.call(['brctl', 'delbr', ifname],
|
|
stderr=open('/dev/null', 'w'))
|
|
|
|
def test_ap_ft_separate_hostapd(dev, apdev, params):
|
|
"""WPA2-PSK-FT AP and separate hostapd process"""
|
|
try:
|
|
run_ap_ft_separate_hostapd(dev, apdev, params, False)
|
|
finally:
|
|
cleanup_ap_ft_separate_hostapd()
|
|
|
|
def test_ap_ft_over_ds_separate_hostapd(dev, apdev, params):
|
|
"""WPA2-PSK-FT AP over DS and separate hostapd process"""
|
|
try:
|
|
run_ap_ft_separate_hostapd(dev, apdev, params, True)
|
|
finally:
|
|
cleanup_ap_ft_separate_hostapd()
|
|
|
|
def run_ap_ft_separate_hostapd(dev, apdev, params, over_ds):
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
logdir = params['logdir']
|
|
pidfile = os.path.join(logdir, 'ap_ft_over_ds_separate_hostapd.pid')
|
|
logfile = os.path.join(logdir, 'ap_ft_over_ds_separate_hostapd.hapd')
|
|
global_ctrl = '/var/run/hostapd-ft'
|
|
br_ifname = 'br-ft'
|
|
|
|
try:
|
|
subprocess.check_call(['brctl', 'addbr', br_ifname])
|
|
subprocess.check_call(['brctl', 'setfd', br_ifname, '0'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
|
|
|
|
subprocess.check_call(["ip", "link", "add", "veth0", "type", "veth",
|
|
"peer", "name", "veth0br"])
|
|
subprocess.check_call(["ip", "link", "add", "veth1", "type", "veth",
|
|
"peer", "name", "veth1br"])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'veth0br', 'up'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'veth1br', 'up'])
|
|
subprocess.check_call(['brctl', 'addif', br_ifname, 'veth0br'])
|
|
subprocess.check_call(['brctl', 'addif', br_ifname, 'veth1br'])
|
|
|
|
subprocess.check_call(['brctl', 'addbr', 'br0ft'])
|
|
subprocess.check_call(['brctl', 'setfd', 'br0ft', '0'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'br0ft', 'up'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'veth0', 'up'])
|
|
subprocess.check_call(['brctl', 'addif', 'br0ft', 'veth0'])
|
|
subprocess.check_call(['brctl', 'addbr', 'br1ft'])
|
|
subprocess.check_call(['brctl', 'setfd', 'br1ft', '0'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'br1ft', 'up'])
|
|
subprocess.check_call(['ip', 'link', 'set', 'dev', 'veth1', 'up'])
|
|
subprocess.check_call(['brctl', 'addif', 'br1ft', 'veth1'])
|
|
except subprocess.CalledProcessError:
|
|
raise HwsimSkip("Bridge or veth not supported (kernel CONFIG_VETH)")
|
|
|
|
with HWSimRadio() as (radio, iface):
|
|
prg = os.path.join(logdir, 'alt-hostapd/hostapd/hostapd')
|
|
if not os.path.exists(prg):
|
|
prg = '../../hostapd/hostapd'
|
|
cmd = [prg, '-B', '-ddKt',
|
|
'-P', pidfile, '-f', logfile, '-g', global_ctrl]
|
|
subprocess.check_call(cmd)
|
|
|
|
hglobal = hostapd.HostapdGlobal(global_ctrl_override=global_ctrl)
|
|
apdev_ft = {'ifname': iface}
|
|
apdev2 = [apdev_ft, apdev[1]]
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["r0kh"] = "ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["r1kh"] = "00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params['bridge'] = 'br0ft'
|
|
hapd0 = hostapd.add_ap(apdev2[0], params,
|
|
global_ctrl_override=global_ctrl)
|
|
apdev2[0]['bssid'] = hapd0.own_addr()
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["r0kh"] = "ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["r1kh"] = "00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params['bridge'] = 'br1ft'
|
|
hapd1 = hostapd.add_ap(apdev2[1], params)
|
|
|
|
run_roams(dev[0], apdev2, hapd0, hapd1, ssid, passphrase,
|
|
over_ds=over_ds, test_connectivity=False)
|
|
|
|
hglobal.terminate()
|
|
|
|
if os.path.exists(pidfile):
|
|
with open(pidfile, 'r') as f:
|
|
pid = int(f.read())
|
|
f.close()
|
|
os.kill(pid, signal.SIGTERM)
|
|
|
|
def test_ap_ft_over_ds_ocv(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["ocv"] = "1"
|
|
try:
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
except Exception as e:
|
|
if "Failed to set hostapd parameter ocv" in str(e):
|
|
raise HwsimSkip("OCV not supported")
|
|
raise
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params["ocv"] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
ocv="1")
|
|
|
|
def test_ap_ft_over_ds_disabled(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS disabled"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['ft_over_ds'] = '0'
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['ft_over_ds'] = '0'
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_vlan_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with VLAN"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
conndev="brvlan1")
|
|
check_mib(dev[0], [("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-4"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-4")])
|
|
|
|
def test_ap_ft_over_ds_many(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
roams=50)
|
|
|
|
def test_ap_ft_vlan_over_ds_many(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with VLAN multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
roams=50, conndev="brvlan1")
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_over_ds_unknown_target(dev, apdev):
|
|
"""WPA2-PSK-FT AP"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
dev[0].roam_over_ds("02:11:22:33:44:55", fail_test=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_over_ds_unexpected(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS and unexpected response"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap1 = apdev[0]
|
|
ap2 = apdev[1]
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
ap1 = apdev[1]
|
|
ap2 = apdev[0]
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
|
|
addr = dev[0].own_addr()
|
|
hapd1ap.set("ext_mgmt_frame_handling", "1")
|
|
logger.info("Foreign STA address")
|
|
msg = {}
|
|
msg['fc'] = 13 << 4
|
|
msg['da'] = addr
|
|
msg['sa'] = ap1['bssid']
|
|
msg['bssid'] = ap1['bssid']
|
|
msg['payload'] = binascii.unhexlify("06021122334455660102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No over-the-DS in progress")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Non-zero status code")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060100")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
hapd1ap.dump_monitor()
|
|
|
|
dev[0].scan_for_bss(ap2['bssid'], freq="2412")
|
|
if "OK" not in dev[0].request("FT_DS " + ap2['bssid']):
|
|
raise Exception("FT_DS failed")
|
|
|
|
req = hapd1ap.mgmt_rx()
|
|
|
|
logger.info("Foreign Target AP")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
addrs = addr.replace(':', '') + ap2['bssid'].replace(':', '')
|
|
|
|
logger.info("No IEs")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "0000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Invalid IEs (trigger parsing failure)")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003700")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Too short MDIE")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "000036021122")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Mobility domain mismatch")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603112201")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No FTIE")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("FTIE SNonce mismatch")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + "1000000000000000000000000000000000000000000000000000000000000001" + "030a6e6173322e77312e6669")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R0KH-ID subelem in FTIE")
|
|
snonce = binascii.hexlify(req['payload'][111:111+32]).decode()
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b20137520000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce)
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R0KH-ID subelem mismatch in FTIE")
|
|
snonce = binascii.hexlify(req['payload'][111:111+32]).decode()
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a11223344556677889900")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R1KH-ID subelem in FTIE")
|
|
r0khid = binascii.hexlify(req['payload'][145:145+10]).decode()
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a" + r0khid)
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No RSNE")
|
|
r0khid = binascii.hexlify(req['payload'][145:145+10]).decode()
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b20137660000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a" + r0khid + "0106000102030405")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
def test_ap_ft_pmf_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF"""
|
|
run_ap_ft_pmf_bip_over_ds(dev, apdev, None)
|
|
|
|
def test_ap_ft_pmf_bip_cmac_128_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF/BIP-CMAC-128"""
|
|
run_ap_ft_pmf_bip_over_ds(dev, apdev, "AES-128-CMAC")
|
|
|
|
def test_ap_ft_pmf_bip_gmac_128_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF/BIP-GMAC-128"""
|
|
run_ap_ft_pmf_bip_over_ds(dev, apdev, "BIP-GMAC-128")
|
|
|
|
def test_ap_ft_pmf_bip_gmac_256_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF/BIP-GMAC-256"""
|
|
run_ap_ft_pmf_bip_over_ds(dev, apdev, "BIP-GMAC-256")
|
|
|
|
def test_ap_ft_pmf_bip_cmac_256_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF/BIP-CMAC-256"""
|
|
run_ap_ft_pmf_bip_over_ds(dev, apdev, "BIP-CMAC-256")
|
|
|
|
def run_ap_ft_pmf_bip_over_ds(dev, apdev, cipher):
|
|
if cipher and cipher not in dev[0].get_capability("group_mgmt"):
|
|
raise HwsimSkip("Cipher %s not supported" % cipher)
|
|
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
if cipher:
|
|
params["group_mgmt_cipher"] = cipher
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
if cipher:
|
|
params["group_mgmt_cipher"] = cipher
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
Wlantest.setup(hapd0)
|
|
wt = Wlantest()
|
|
wt.flush()
|
|
wt.add_passphrase(passphrase)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
group_mgmt=cipher)
|
|
|
|
def test_ap_ft_over_ds_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS (pull PMK)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
|
|
def test_ap_ft_over_ds_pull_old_key(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS (pull PMK; old key)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1_old_key(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_old_key(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
|
|
def test_ap_ft_over_ds_pull_vlan(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS (pull PMK) with VLAN"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['dynamic_vlan'] = "1"
|
|
params['accept_mac_file'] = "hostapd.accept"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
conndev="brvlan1")
|
|
|
|
def start_ft_sae(dev, apdev, wpa_ptk_rekey=None, sae_pwe=None):
|
|
if "SAE" not in dev.get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
if wpa_ptk_rekey:
|
|
params['wpa_ptk_rekey'] = str(wpa_ptk_rekey)
|
|
if sae_pwe is not None:
|
|
params['sae_pwe'] = sae_pwe
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
if wpa_ptk_rekey:
|
|
params['wpa_ptk_rekey'] = str(wpa_ptk_rekey)
|
|
if sae_pwe is not None:
|
|
params['sae_pwe'] = sae_pwe
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
key_mgmt = hapd1.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
dev.request("SET sae_groups ")
|
|
return hapd0, hapd1
|
|
|
|
def test_ap_ft_sae(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True)
|
|
|
|
def test_ap_ft_sae_h2e(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP (H2E)"""
|
|
try:
|
|
dev[0].set("sae_pwe", "2")
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev, sae_pwe="2")
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True)
|
|
finally:
|
|
dev[0].set("sae_pwe", "0")
|
|
|
|
def test_ap_ft_sae_ptk_rekey0(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP and PTK rekey triggered by station"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
ptk_rekey="1", roams=0)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_ptk_rekey1(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP and PTK rekey triggered by station"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
ptk_rekey="1", only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP and PTK rekey triggered by AP"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev, wpa_ptk_rekey=2)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP over DS"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
over_ds=True)
|
|
|
|
def test_ap_ft_sae_over_ds_ptk_rekey0(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP over DS and PTK rekey triggered by station"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
over_ds=True, ptk_rekey="1", roams=0)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_over_ds_ptk_rekey1(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP over DS and PTK rekey triggered by station"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
over_ds=True, ptk_rekey="1", only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_over_ds_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP over DS and PTK rekey triggered by AP"""
|
|
hapd0, hapd1 = start_ft_sae(dev[0], apdev, wpa_ptk_rekey=2)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", sae=True,
|
|
over_ds=True, only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_sae_pw_id(dev, apdev):
|
|
"""FT-SAE with Password Identifier"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
|
|
params = ft_params1(ssid=ssid)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
params['sae_password'] = 'secret|id=pwid'
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
params['sae_password'] = 'secret|id=pwid'
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].request("SET sae_groups ")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase=None, sae=True,
|
|
sae_password="secret", sae_password_id="pwid")
|
|
|
|
def test_ap_ft_sae_with_both_akms(dev, apdev):
|
|
"""SAE + FT-SAE configuration"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE SAE"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE SAE"
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
dev[0].request("SET sae_groups ")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase, sae=True,
|
|
sae_and_psk=True)
|
|
|
|
def test_ap_ft_sae_pmksa_caching(dev, apdev):
|
|
"""WPA2-FT-SAE AP and PMKSA caching for initial mobility domain association"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
dev[0].request("SET sae_groups ")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase, sae=True,
|
|
pmksa_caching=True)
|
|
|
|
def test_ap_ft_sae_pmksa_caching_pwe(dev, apdev):
|
|
"""WPA2-FT-SAE AP and PMKSA caching for initial mobility domain association (STA PWE both)"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
try:
|
|
dev[0].request("SET sae_groups ")
|
|
dev[0].set("sae_pwe", "2")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase, sae=True,
|
|
pmksa_caching=True)
|
|
finally:
|
|
dev[0].set("sae_groups", "")
|
|
dev[0].set("sae_pwe", "0")
|
|
|
|
def test_ap_ft_sae_pmksa_caching_h2e(dev, apdev):
|
|
"""WPA2-FT-SAE AP and PMKSA caching for initial mobility domain association (H2E)"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
params['sae_pwe'] = "1"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
params['sae_pwe'] = "1"
|
|
hapd = hostapd.add_ap(apdev[1], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
try:
|
|
dev[0].request("SET sae_groups ")
|
|
dev[0].set("sae_pwe", "1")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase, sae=True,
|
|
pmksa_caching=True)
|
|
finally:
|
|
dev[0].set("sae_groups", "")
|
|
dev[0].set("sae_pwe", "0")
|
|
|
|
def generic_ap_ft_eap(dev, apdev, vlan=False, cui=False, over_ds=False,
|
|
discovery=False, roams=1, wpa_ptk_rekey=0,
|
|
only_one_way=False):
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
if vlan:
|
|
identity = "gpsk-vlan1"
|
|
conndev = "brvlan1"
|
|
elif cui:
|
|
identity = "gpsk-cui"
|
|
conndev = False
|
|
else:
|
|
identity = "gpsk user"
|
|
conndev = False
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase, discovery=discovery)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
if vlan:
|
|
params["dynamic_vlan"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-EAP":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase, discovery=discovery)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
if vlan:
|
|
params["dynamic_vlan"] = "1"
|
|
if wpa_ptk_rekey:
|
|
params["wpa_ptk_rekey"] = str(wpa_ptk_rekey)
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True,
|
|
over_ds=over_ds, roams=roams, eap_identity=identity,
|
|
conndev=conndev, only_one_way=only_one_way)
|
|
if "[WPA2-FT/EAP-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
check_mib(dev[0], [("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-3"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-3")])
|
|
if only_one_way:
|
|
return
|
|
|
|
# Verify EAPOL reauthentication after FT protocol
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap = hapd
|
|
else:
|
|
ap = hapd1
|
|
ap.request("EAPOL_REAUTH " + dev[0].own_addr())
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not succeed")
|
|
time.sleep(0.1)
|
|
if conndev:
|
|
hwsim_utils.test_connectivity_iface(dev[0], ap, conndev)
|
|
else:
|
|
hwsim_utils.test_connectivity(dev[0], ap)
|
|
|
|
def test_ap_ft_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP"""
|
|
generic_ap_ft_eap(dev, apdev)
|
|
|
|
def test_ap_ft_eap_cui(dev, apdev):
|
|
"""WPA2-EAP-FT AP with CUI"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=False, cui=True)
|
|
|
|
def test_ap_ft_eap_vlan(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True)
|
|
|
|
def test_ap_ft_eap_vlan_multi(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True, roams=50)
|
|
|
|
def test_ap_ft_eap_over_ds(dev, apdev):
|
|
"""WPA2-EAP-FT AP using over-the-DS"""
|
|
generic_ap_ft_eap(dev, apdev, over_ds=True)
|
|
|
|
def test_ap_ft_eap_dis(dev, apdev):
|
|
"""WPA2-EAP-FT AP with AP discovery"""
|
|
generic_ap_ft_eap(dev, apdev, discovery=True)
|
|
|
|
def test_ap_ft_eap_dis_over_ds(dev, apdev):
|
|
"""WPA2-EAP-FT AP with AP discovery and over-the-DS"""
|
|
generic_ap_ft_eap(dev, apdev, over_ds=True, discovery=True)
|
|
|
|
def test_ap_ft_eap_vlan(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True)
|
|
|
|
def test_ap_ft_eap_vlan_multi(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True, roams=50)
|
|
|
|
def test_ap_ft_eap_vlan_over_ds(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN + over_ds"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True, over_ds=True)
|
|
|
|
def test_ap_ft_eap_vlan_over_ds_multi(dev, apdev):
|
|
"""WPA2-EAP-FT AP with VLAN + over_ds"""
|
|
generic_ap_ft_eap(dev, apdev, vlan=True, over_ds=True, roams=50)
|
|
|
|
def generic_ap_ft_eap_pull(dev, apdev, vlan=False):
|
|
"""WPA2-EAP-FT AP (pull PMK)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
if vlan:
|
|
identity = "gpsk-vlan1"
|
|
conndev = "brvlan1"
|
|
else:
|
|
identity = "gpsk user"
|
|
conndev = False
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
if vlan:
|
|
params["dynamic_vlan"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-EAP":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
if vlan:
|
|
params["dynamic_vlan"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True,
|
|
eap_identity=identity, conndev=conndev)
|
|
|
|
def test_ap_ft_eap_pull(dev, apdev):
|
|
"""WPA2-EAP-FT AP (pull PMK)"""
|
|
generic_ap_ft_eap_pull(dev, apdev)
|
|
|
|
def test_ap_ft_eap_pull_vlan(dev, apdev):
|
|
generic_ap_ft_eap_pull(dev, apdev, vlan=True)
|
|
|
|
def test_ap_ft_eap_pull_wildcard(dev, apdev):
|
|
"""WPA2-EAP-FT AP (pull PMK) - wildcard R0KH/R1KH"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase, discovery=True)
|
|
params['wpa_key_mgmt'] = "WPA-EAP FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
params["r0kh"] = "ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["r1kh"] = "00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["ft_psk_generate_local"] = "1"
|
|
params["eap_server"] = "0"
|
|
params["rkh_pos_timeout"] = "100"
|
|
params["rkh_neg_timeout"] = "50"
|
|
params["rkh_pull_timeout"] = "1234"
|
|
params["rkh_pull_retries"] = "10"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase, discovery=True)
|
|
params['wpa_key_mgmt'] = "WPA-EAP FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
params["r0kh"] = "ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["r1kh"] = "00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["ft_psk_generate_local"] = "1"
|
|
params["eap_server"] = "0"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_mismatching_rrb_key_push(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching RRB key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_mismatching_rrb_key_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching RRB key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_mismatching_r0kh_id_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH-ID (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params["nas_identifier"] = "nas0.w1.fi"
|
|
hostapd.add_ap(apdev[0], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].roam_over_ds(apdev[1]['bssid'], fail_test=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_mismatching_rrb_r0kh_push(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_mismatching_rrb_r0kh_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_key_push_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP over DS with mismatching RRB key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True, eap=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_key_pull_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP over DS with mismatching RRB key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True, eap=True)
|
|
|
|
def test_ap_ft_mismatching_r0kh_id_pull_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP over DS with mismatching R0KH-ID (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params["nas_identifier"] = "nas0.w1.fi"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hostapd.add_ap(apdev[0], params)
|
|
dev[0].connect(ssid, key_mgmt="FT-EAP", proto="WPA2", ieee80211w="1",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].roam_over_ds(apdev[1]['bssid'], fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_r0kh_push_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP over DS with mismatching R0KH key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True, eap=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_r0kh_pull_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP over DS with mismatching R0KH key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True, eap=True)
|
|
|
|
def test_ap_ft_gtk_rekey(dev, apdev):
|
|
"""WPA2-PSK-FT AP and GTK rekey"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out after initial association")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].roam(apdev[1]['bssid'])
|
|
if dev[0].get_status_field('bssid') != apdev[1]['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
hwsim_utils.test_connectivity(dev[0], hapd1)
|
|
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out after FT protocol")
|
|
hwsim_utils.test_connectivity(dev[0], hapd1)
|
|
|
|
def test_ft_psk_key_lifetime_in_memory(dev, apdev, params):
|
|
"""WPA2-PSK-FT and key lifetime in memory"""
|
|
ssid = "test-ft"
|
|
passphrase = "04c2726b4b8d5f1b4db9c07aa4d9e9d8f765cb5d25ec817e6cc4fcdd5255db0"
|
|
psk = '93c90846ff67af9037ed83fb72b63dbeddaa81d47f926c20909b5886f1d9358d'
|
|
pmk = binascii.unhexlify(psk)
|
|
p = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], p)
|
|
p = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], p)
|
|
|
|
pid = find_wpas_process(dev[0])
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
# The decrypted copy of GTK is freed only after the CTRL-EVENT-CONNECTED
|
|
# event has been delivered, so verify that wpa_supplicant has returned to
|
|
# eloop before reading process memory.
|
|
time.sleep(1)
|
|
dev[0].ping()
|
|
|
|
buf = read_process_memory(pid, pmk)
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
dev[0].relog()
|
|
pmkr0 = None
|
|
pmkr1 = None
|
|
ptk = None
|
|
gtk = None
|
|
with open(os.path.join(params['logdir'], 'log0'), 'r') as f:
|
|
for l in f.readlines():
|
|
if "FT: PMK-R0 - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
pmkr0 = binascii.unhexlify(val)
|
|
if "FT: PMK-R1 - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
pmkr1 = binascii.unhexlify(val)
|
|
if "FT: KCK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
kck = binascii.unhexlify(val)
|
|
if "FT: KEK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
kek = binascii.unhexlify(val)
|
|
if "FT: TK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
tk = binascii.unhexlify(val)
|
|
if "WPA: Group Key - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
gtk = binascii.unhexlify(val)
|
|
if not pmkr0 or not pmkr1 or not kck or not kek or not tk or not gtk:
|
|
raise Exception("Could not find keys from debug log")
|
|
if len(gtk) != 16:
|
|
raise Exception("Unexpected GTK length")
|
|
|
|
logger.info("Checking keys in memory while associated")
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
if pmk not in buf:
|
|
raise HwsimSkip("PMK not found while associated")
|
|
if pmkr0 not in buf:
|
|
raise HwsimSkip("PMK-R0 not found while associated")
|
|
if pmkr1 not in buf:
|
|
raise HwsimSkip("PMK-R1 not found while associated")
|
|
if kck not in buf:
|
|
raise Exception("KCK not found while associated")
|
|
if kek not in buf:
|
|
raise Exception("KEK not found while associated")
|
|
#if tk in buf:
|
|
# raise Exception("TK found from memory")
|
|
|
|
logger.info("Checking keys in memory after disassociation")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
|
|
# Note: PMK/PSK is still present in network configuration
|
|
|
|
fname = os.path.join(params['logdir'],
|
|
'ft_psk_key_lifetime_in_memory.memctx-')
|
|
verify_not_present(buf, pmkr0, fname, "PMK-R0")
|
|
verify_not_present(buf, pmkr1, fname, "PMK-R1")
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
if gtk in buf:
|
|
get_key_locations(buf, gtk, "GTK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
|
|
logger.info("Checking keys in memory after network profile removal")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
|
|
verify_not_present(buf, pmk, fname, "PMK")
|
|
verify_not_present(buf, pmkr0, fname, "PMK-R0")
|
|
verify_not_present(buf, pmkr1, fname, "PMK-R1")
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_invalid_resp(dev, apdev):
|
|
"""WPA2-PSK-FT AP and invalid response IEs"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
tests = [
|
|
# Various IEs for test coverage. The last one is FTIE with invalid
|
|
# R1KH-ID subelement.
|
|
"020002000000" + "3800" + "38051122334455" + "3754000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010100",
|
|
# FTIE with invalid R0KH-ID subelement (len=0).
|
|
"020002000000" + "3754000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010300",
|
|
# FTIE with invalid R0KH-ID subelement (len=49).
|
|
"020002000000" + "378500010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001033101020304050607080910111213141516171819202122232425262728293031323334353637383940414243444546474849",
|
|
# Invalid RSNE.
|
|
"020002000000" + "3000",
|
|
# Required IEs missing from protected IE count.
|
|
"020002000000" + "3603a1b201" + "375200010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900",
|
|
# RIC missing from protected IE count.
|
|
"020002000000" + "3603a1b201" + "375200020203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900",
|
|
# Protected IE missing.
|
|
"020002000000" + "3603a1b201" + "375200ff0203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900" + "0000"]
|
|
for t in tests:
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
hapd1.set("ext_mgmt_frame_handling", "1")
|
|
hapd1.dump_monitor()
|
|
if "OK" not in dev[0].request("ROAM " + apdev[1]['bssid']):
|
|
raise Exception("ROAM failed")
|
|
auth = None
|
|
for i in range(20):
|
|
msg = hapd1.mgmt_rx()
|
|
if msg['subtype'] == 11:
|
|
auth = msg
|
|
break
|
|
if not auth:
|
|
raise Exception("Authentication frame not seen")
|
|
|
|
resp = {}
|
|
resp['fc'] = auth['fc']
|
|
resp['da'] = auth['sa']
|
|
resp['sa'] = auth['da']
|
|
resp['bssid'] = auth['bssid']
|
|
resp['payload'] = binascii.unhexlify(t)
|
|
hapd1.mgmt_tx(resp)
|
|
hapd1.set("ext_mgmt_frame_handling", "0")
|
|
dev[0].wait_disconnected()
|
|
|
|
dev[0].request("RECONNECT")
|
|
dev[0].wait_connected()
|
|
|
|
def test_ap_ft_gcmp_256(dev, apdev):
|
|
"""WPA2-PSK-FT AP with GCMP-256 cipher"""
|
|
if "GCMP-256" not in dev[0].get_capability("pairwise"):
|
|
raise HwsimSkip("Cipher GCMP-256 not supported")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['rsn_pairwise'] = "GCMP-256"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['rsn_pairwise'] = "GCMP-256"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
pairwise_cipher="GCMP-256", group_cipher="GCMP-256")
|
|
|
|
def setup_ap_ft_oom(dev, apdev):
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
dst = apdev[1]['bssid']
|
|
else:
|
|
dst = apdev[0]['bssid']
|
|
|
|
dev[0].scan_for_bss(dst, freq="2412")
|
|
|
|
return dst
|
|
|
|
def test_ap_ft_oom(dev, apdev):
|
|
"""WPA2-PSK-FT and OOM"""
|
|
dst = setup_ap_ft_oom(dev, apdev)
|
|
with alloc_fail(dev[0], 1, "wpa_ft_gen_req_ies"):
|
|
dev[0].roam(dst)
|
|
|
|
def test_ap_ft_oom2(dev, apdev):
|
|
"""WPA2-PSK-FT and OOM (2)"""
|
|
dst = setup_ap_ft_oom(dev, apdev)
|
|
with fail_test(dev[0], 1, "wpa_ft_mic"):
|
|
dev[0].roam(dst, fail_test=True, assoc_reject_ok=True)
|
|
|
|
def test_ap_ft_oom3(dev, apdev):
|
|
"""WPA2-PSK-FT and OOM (3)"""
|
|
dst = setup_ap_ft_oom(dev, apdev)
|
|
with fail_test(dev[0], 1, "os_get_random;wpa_ft_prepare_auth_request"):
|
|
dev[0].roam(dst)
|
|
|
|
def test_ap_ft_oom4(dev, apdev):
|
|
"""WPA2-PSK-FT and OOM (4)"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
dst = setup_ap_ft_oom(dev, apdev)
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
with alloc_fail(dev[0], 1, "=sme_update_ft_ies"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
def test_ap_ft_ap_oom(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
with alloc_fail(hapd0, 1, "wpa_ft_store_pmk_r0"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
# This roam will fail due to missing PMK-R0 (OOM prevented storing it)
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom2(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 2"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
with alloc_fail(hapd0, 1, "wpa_ft_store_pmk_r1"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
dev[0].roam(bssid1)
|
|
if dev[0].get_status_field('bssid') != bssid1:
|
|
raise Exception("Did not roam to AP1")
|
|
# This roam will fail due to missing PMK-R1 (OOM prevented storing it)
|
|
dev[0].roam(bssid0)
|
|
|
|
def test_ap_ft_ap_oom3(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 3"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with alloc_fail(hapd1, 1, "wpa_ft_pull_pmk_r1"):
|
|
# This will fail due to not being able to send out PMK-R1 pull request
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 2, "os_get_random;wpa_ft_pull_pmk_r1"):
|
|
# This will fail due to not being able to send out PMK-R1 pull request
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 2, "aes_siv_encrypt;wpa_ft_pull_pmk_r1"):
|
|
# This will fail due to not being able to send out PMK-R1 pull request
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom3b(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 3b"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with fail_test(hapd1, 1, "os_get_random;wpa_ft_pull_pmk_r1"):
|
|
# This will fail due to not being able to send out PMK-R1 pull request
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom4(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 4"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with alloc_fail(hapd1, 1, "wpa_ft_gtk_subelem"):
|
|
dev[0].roam(bssid1)
|
|
if dev[0].get_status_field('bssid') != bssid1:
|
|
raise Exception("Did not roam to AP1")
|
|
|
|
with fail_test(hapd0, 1, "i802_get_seqnum;wpa_ft_gtk_subelem"):
|
|
dev[0].roam(bssid0)
|
|
if dev[0].get_status_field('bssid') != bssid0:
|
|
raise Exception("Did not roam to AP0")
|
|
|
|
with fail_test(hapd0, 1, "aes_wrap;wpa_ft_gtk_subelem"):
|
|
dev[0].roam(bssid1)
|
|
if dev[0].get_status_field('bssid') != bssid1:
|
|
raise Exception("Did not roam to AP1")
|
|
|
|
def test_ap_ft_ap_oom5(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 5"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with alloc_fail(hapd1, 1, "=wpa_ft_process_auth_req"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 1, "os_get_random;wpa_ft_process_auth_req"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 1, "sha256_prf_bits;wpa_pmk_r1_to_ptk;wpa_ft_process_auth_req"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 3, "wpa_pmk_r1_to_ptk;wpa_ft_process_auth_req"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
with fail_test(hapd1, 1, "wpa_derive_pmk_r1_name;wpa_ft_process_auth_req"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom6(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 6"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
with fail_test(hapd0, 1, "wpa_derive_pmk_r0;wpa_auth_derive_ptk_ft"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
with fail_test(hapd0, 1, "wpa_derive_pmk_r1;wpa_auth_derive_ptk_ft"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
with fail_test(hapd0, 1, "wpa_pmk_r1_to_ptk;wpa_auth_derive_ptk_ft"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
def test_ap_ft_ap_oom7a(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 7a"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="2", scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with alloc_fail(hapd1, 1, "wpa_ft_igtk_subelem"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom7b(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 7b"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="2", scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with fail_test(hapd1, 1, "aes_wrap;wpa_ft_igtk_subelem"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom7c(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 7c"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="2", scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with alloc_fail(hapd1, 1, "=wpa_sm_write_assoc_resp_ies"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom7d(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 7d"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="2", scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with fail_test(hapd1, 1, "wpa_ft_mic;wpa_sm_write_assoc_resp_ies"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom8(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 8"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['ft_psk_generate_local'] = "1"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['ft_psk_generate_local'] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
with fail_test(hapd1, 1, "wpa_derive_pmk_r0;wpa_ft_psk_pmk_r1"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
with fail_test(hapd1, 1, "wpa_derive_pmk_r1;wpa_ft_psk_pmk_r1"):
|
|
# This will fail to roam
|
|
dev[0].roam(bssid1)
|
|
|
|
def test_ap_ft_ap_oom9(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 9"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
|
|
with alloc_fail(hapd0, 1, "wpa_ft_action_rx"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd0, "GET_ALLOC_FAIL")
|
|
|
|
with alloc_fail(hapd1, 1, "wpa_ft_rrb_rx_request"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd1, "GET_ALLOC_FAIL")
|
|
|
|
with alloc_fail(hapd1, 1, "wpa_ft_send_rrb_auth_resp"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd1, "GET_ALLOC_FAIL")
|
|
|
|
def test_ap_ft_ap_oom10(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 10"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
dev[0].scan_for_bss(bssid1, freq="2412")
|
|
|
|
with fail_test(hapd0, 1, "aes_siv_decrypt;wpa_ft_rrb_rx_pull"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd0, "GET_FAIL")
|
|
|
|
with fail_test(hapd0, 1, "wpa_derive_pmk_r1;wpa_ft_rrb_rx_pull"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd0, "GET_FAIL")
|
|
|
|
with fail_test(hapd0, 1, "aes_siv_encrypt;wpa_ft_rrb_rx_pull"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd0, "GET_FAIL")
|
|
|
|
with fail_test(hapd1, 1, "aes_siv_decrypt;wpa_ft_rrb_rx_resp"):
|
|
# This will fail to roam
|
|
if "OK" not in dev[0].request("FT_DS " + bssid1):
|
|
raise Exception("FT_DS failed")
|
|
wait_fail_trigger(hapd1, "GET_FAIL")
|
|
|
|
def test_ap_ft_ap_oom11(dev, apdev):
|
|
"""WPA2-PSK-FT and AP OOM 11"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid0, freq="2412")
|
|
with fail_test(hapd0, 1, "wpa_derive_pmk_r1;wpa_ft_generate_pmk_r1"):
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
wait_fail_trigger(hapd0, "GET_FAIL")
|
|
|
|
dev[1].scan_for_bss(bssid0, freq="2412")
|
|
with fail_test(hapd0, 1, "aes_siv_encrypt;wpa_ft_generate_pmk_r1"):
|
|
dev[1].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
wait_fail_trigger(hapd0, "GET_FAIL")
|
|
|
|
def test_ap_ft_over_ds_proto_ap(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS protocol testing for AP processing"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
_bssid0 = bssid0.replace(':', '')
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
addr = dev[0].own_addr()
|
|
_addr = addr.replace(':', '')
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
_bssid1 = bssid1.replace(':', '')
|
|
|
|
hapd0.set("ext_mgmt_frame_handling", "1")
|
|
hdr = "d0003a01" + _bssid0 + _addr + _bssid0 + "1000"
|
|
valid = "0601" + _addr + _bssid1
|
|
tests = ["0601",
|
|
"0601" + _addr,
|
|
"0601" + _addr + _bssid0,
|
|
"0601" + _addr + "ffffffffffff",
|
|
"0601" + _bssid0 + _bssid0,
|
|
valid,
|
|
valid + "01",
|
|
valid + "3700",
|
|
valid + "3600",
|
|
valid + "3603ffffff",
|
|
valid + "3603a1b2ff",
|
|
valid + "3603a1b2ff" + "3700",
|
|
valid + "3603a1b2ff" + "37520000" + 16*"00" + 32*"00" + 32*"00",
|
|
valid + "3603a1b2ff" + "37520001" + 16*"00" + 32*"00" + 32*"00",
|
|
valid + "3603a1b2ff" + "37550000" + 16*"00" + 32*"00" + 32*"00" + "0301aa",
|
|
valid + "3603a1b2ff" + "37550000" + 16*"00" + 32*"00" + 32*"00" + "0301aa" + "3000",
|
|
valid + "3603a1b2ff" + "37550000" + 16*"00" + 32*"00" + 32*"00" + "0301aa" + "30260100000fac040100000fac040100000facff00000100a225368fe0983b5828a37a0acb37f253",
|
|
valid + "3603a1b2ff" + "37550000" + 16*"00" + 32*"00" + 32*"00" + "0301aa" + "30260100000fac040100000fac030100000fac0400000100a225368fe0983b5828a37a0acb37f253",
|
|
valid + "3603a1b2ff" + "37550000" + 16*"00" + 32*"00" + 32*"00" + "0301aa" + "30260100000fac040100000fac040100000fac0400000100a225368fe0983b5828a37a0acb37f253",
|
|
valid + "0001"]
|
|
for t in tests:
|
|
hapd0.dump_monitor()
|
|
if "OK" not in hapd0.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t):
|
|
raise Exception("MGMT_RX_PROCESS failed")
|
|
|
|
hapd0.set("ext_mgmt_frame_handling", "0")
|
|
|
|
def test_ap_ft_over_ds_proto(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS protocol testing"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
# FT Action Response while no FT-over-DS in progress
|
|
msg = {}
|
|
msg['fc'] = 13 << 4
|
|
msg['da'] = dev[0].own_addr()
|
|
msg['sa'] = apdev[0]['bssid']
|
|
msg['bssid'] = apdev[0]['bssid']
|
|
msg['payload'] = binascii.unhexlify("06020200000000000200000004000000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
hapd0.set("ext_mgmt_frame_handling", "1")
|
|
hapd0.dump_monitor()
|
|
dev[0].request("FT_DS " + apdev[1]['bssid'])
|
|
for i in range(0, 10):
|
|
req = hapd0.mgmt_rx()
|
|
if req is None:
|
|
raise Exception("MGMT RX wait timed out")
|
|
if req['subtype'] == 13:
|
|
break
|
|
req = None
|
|
if not req:
|
|
raise Exception("FT Action frame not received")
|
|
|
|
# FT Action Response for unexpected Target AP
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "f20000000400" + "0000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response without MDIE
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response without FTIE
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000" + "3603a1b201")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response with FTIE SNonce mismatch
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000" + "3603a1b201" + "3766000000000000000000000000000000000000c4e67ac1999bebd00ff4ae4d5dcaf87896bb060b469f7c78d49623fb395c3455ffffff6b693fe6f8d8c5dfac0a22344750775bd09437f98b238c9f87b97f790c0106000102030406030a6e6173312e77312e6669")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
@remote_compatible
|
|
def test_ap_ft_rrb(dev, apdev):
|
|
"""WPA2-PSK-FT RRB protocol testing"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
_dst_ll = binascii.unhexlify(apdev[0]['bssid'].replace(':', ''))
|
|
_src_ll = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
proto = b'\x89\x0d'
|
|
ehdr = _dst_ll + _src_ll + proto
|
|
|
|
# Too short RRB frame
|
|
pkt = ehdr + b'\x01'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB discarded frame wikth unrecognized type
|
|
pkt = ehdr + b'\x02' + b'\x02' + b'\x01\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB frame too short for action frame
|
|
pkt = ehdr + b'\x01' + b'\x02' + b'\x01\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short RRB frame (not enough room for Action Frame body)
|
|
pkt = ehdr + b'\x01' + b'\x02' + b'\x00\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Unexpected Action frame category
|
|
pkt = ehdr + b'\x01' + b'\x02' + b'\x0e\x00' + _src_ll + b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Unexpected Action in RRB Request
|
|
pkt = ehdr + b'\x01' + b'\x00' + b'\x0e\x00' + _src_ll + b'\x06\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Target AP address in RRB Request does not match with own address
|
|
pkt = ehdr + b'\x01' + b'\x00' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Not enough room for status code in RRB Response
|
|
pkt = ehdr + b'\x01' + b'\x01' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB discarded frame with unknown packet_type
|
|
pkt = ehdr + b'\x01' + b'\x02' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB Response with non-zero status code; no STA match
|
|
pkt = ehdr + b'\x01' + b'\x01' + b'\x10\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' + b'\xff\xff'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB Response with zero status code and extra data; STA match
|
|
pkt = ehdr + b'\x01' + b'\x01' + b'\x11\x00' + _src_ll + b'\x06\x01' + _src_ll + b'\x00\x00\x00\x00\x00\x00' + b'\x00\x00' + b'\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 pull
|
|
pkt = ehdr + b'\x01' + b'\xc8' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 resp
|
|
pkt = ehdr + b'\x01' + b'\xc9' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 push
|
|
pkt = ehdr + b'\x01' + b'\xca' + b'\x0e\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# No matching R0KH address found for PMK-R0 pull response
|
|
pkt = ehdr + b'\x01' + b'\xc9' + b'\x5a\x00' + _src_ll + b'\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' + 76 * b'\00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt).decode()):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
@remote_compatible
|
|
def test_rsn_ie_proto_ft_psk_sta(dev, apdev):
|
|
"""RSN element protocol testing for FT-PSK + PMF cases on STA side"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "1"
|
|
# This is the RSN element used normally by hostapd
|
|
params['own_ie_override'] = '30140100000fac040100000fac040100000fac048c00' + '3603a1b201'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
id = dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412",
|
|
pairwise="CCMP", group="CCMP")
|
|
|
|
tests = [('PMKIDCount field included',
|
|
'30160100000fac040100000fac040100000fac048c000000' + '3603a1b201'),
|
|
('Extra IE before RSNE',
|
|
'dd0400000000' + '30140100000fac040100000fac040100000fac048c00' + '3603a1b201'),
|
|
('PMKIDCount and Group Management Cipher suite fields included',
|
|
'301a0100000fac040100000fac040100000fac048c000000000fac06' + '3603a1b201'),
|
|
('Extra octet after defined fields (future extensibility)',
|
|
'301b0100000fac040100000fac040100000fac048c000000000fac0600' + '3603a1b201'),
|
|
('No RSN Capabilities field (PMF disabled in practice)',
|
|
'30120100000fac040100000fac040100000fac04' + '3603a1b201')]
|
|
for txt, ie in tests:
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
logger.info(txt)
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', ie)
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
dev[0].wait_connected()
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info('Invalid RSNE causing internal hostapd error')
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', '30130100000fac040100000fac040100000fac048c' + '3603a1b201')
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
# hostapd fails to generate EAPOL-Key msg 3/4, so this connection cannot
|
|
# complete.
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected connection")
|
|
dev[0].request("DISCONNECT")
|
|
|
|
def start_ft(apdev, wpa_ptk_rekey=None):
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
if wpa_ptk_rekey:
|
|
params['wpa_ptk_rekey'] = str(wpa_ptk_rekey)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
if wpa_ptk_rekey:
|
|
params['wpa_ptk_rekey'] = str(wpa_ptk_rekey)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
return hapd0, hapd1
|
|
|
|
def check_ptk_rekey(dev, hapd0=None, hapd1=None):
|
|
ev = dev.wait_event(["CTRL-EVENT-DISCONNECTED",
|
|
"WPA: Key negotiation completed"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No event received after roam")
|
|
if "CTRL-EVENT-DISCONNECTED" in ev:
|
|
raise Exception("Unexpected disconnection after roam")
|
|
|
|
if not hapd0 or not hapd1:
|
|
return
|
|
if dev.get_status_field('bssid') == hapd0.own_addr():
|
|
hapd = hapd0
|
|
else:
|
|
hapd = hapd1
|
|
time.sleep(0.1)
|
|
hwsim_utils.test_connectivity(dev, hapd)
|
|
|
|
def test_ap_ft_ptk_rekey(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by station after roam"""
|
|
hapd0, hapd1 = start_ft(apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", ptk_rekey="1")
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_ptk_rekey2(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by station after one roam"""
|
|
hapd0, hapd1 = start_ft(apdev)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678", ptk_rekey="1",
|
|
only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by AP after roam"""
|
|
hapd0, hapd1 = start_ft(apdev, wpa_ptk_rekey=2)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678")
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_ptk_rekey_ap2(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by AP after one roam"""
|
|
hapd0, hapd1 = start_ft(apdev, wpa_ptk_rekey=2)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, "test-ft", "12345678",
|
|
only_one_way=True)
|
|
check_ptk_rekey(dev[0], hapd0, hapd1)
|
|
|
|
def test_ap_ft_eap_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-EAP-FT PTK rekeying triggered by AP"""
|
|
generic_ap_ft_eap(dev, apdev, only_one_way=True, wpa_ptk_rekey=2)
|
|
check_ptk_rekey(dev[0])
|
|
|
|
def test_ap_ft_internal_rrb_check(dev, apdev):
|
|
"""RRB internal delivery only to WPA enabled BSS"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-EAP":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
hapd1 = hostapd.add_ap(apdev[1], {"ssid": ssid})
|
|
|
|
# Connect to WPA enabled AP
|
|
dev[0].connect(ssid, key_mgmt="FT-EAP", proto="WPA2", ieee80211w="1",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
|
|
# Try over_ds roaming to non-WPA-enabled AP.
|
|
# If hostapd does not check hapd->wpa_auth internally, it will crash now.
|
|
dev[0].roam_over_ds(apdev[1]['bssid'], fail_test=True)
|
|
|
|
def test_ap_ft_extra_ie(dev, apdev):
|
|
"""WPA2-PSK-FT AP with WPA2-PSK enabled and unexpected MDE"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["wpa_key_mgmt"] = "WPA-PSK FT-PSK"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
dev[1].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
dev[2].connect(ssid, psk=passphrase, key_mgmt="WPA-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
try:
|
|
# Add Mobility Domain element to test AP validation code.
|
|
dev[0].request("VENDOR_ELEM_ADD 13 3603a1b201")
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="WPA-PSK", proto="WPA2",
|
|
scan_freq="2412", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
|
|
"CTRL-EVENT-ASSOC-REJECT"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No connection result")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("Non-FT association accepted with MDE")
|
|
if "status_code=43" not in ev:
|
|
raise Exception("Unexpected status code: " + ev)
|
|
dev[0].request("DISCONNECT")
|
|
finally:
|
|
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
|
|
|
|
def test_ap_ft_ric(dev, apdev):
|
|
"""WPA2-PSK-FT AP and RIC"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].set("ric_ies", "")
|
|
dev[0].set("ric_ies", '""')
|
|
if "FAIL" not in dev[0].request("SET ric_ies q"):
|
|
raise Exception("Invalid ric_ies value accepted")
|
|
|
|
tests = ["3900",
|
|
"3900ff04eeeeeeee",
|
|
"390400000000",
|
|
"390400000000" + "390400000000",
|
|
"390400000000" + "dd050050f20202",
|
|
"390400000000" + "dd3d0050f2020201" + 55*"00",
|
|
"390400000000" + "dd3d0050f2020201aa300010270000000000000000000000000000000000000000000000000000ffffff7f00000000000000000000000040420f00ffff0000",
|
|
"390401010000" + "dd3d0050f2020201aa3000dc050000000000000000000000000000000000000000000000000000dc050000000000000000000000000000808d5b0028230000"]
|
|
for t in tests:
|
|
dev[0].set("ric_ies", t)
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
test_connectivity=False)
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
|
|
def ie_hex(ies, id):
|
|
return binascii.hexlify(struct.pack('BB', id, len(ies[id])) + ies[id]).decode()
|
|
|
|
def test_ap_ft_reassoc_proto(dev, apdev):
|
|
"""WPA2-PSK-FT AP Reassociation Request frame parsing"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == hapd0.own_addr():
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
|
|
dev[0].scan_for_bss(hapd2ap.own_addr(), freq="2412")
|
|
hapd2ap.set("ext_mgmt_frame_handling", "1")
|
|
dev[0].request("ROAM " + hapd2ap.own_addr())
|
|
|
|
while True:
|
|
req = hapd2ap.mgmt_rx()
|
|
hapd2ap.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + binascii.hexlify(req['frame']).decode())
|
|
if req['subtype'] == 11:
|
|
break
|
|
|
|
while True:
|
|
req = hapd2ap.mgmt_rx()
|
|
if req['subtype'] == 2:
|
|
break
|
|
hapd2ap.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + binascii.hexlify(req['frame']).decode())
|
|
|
|
# IEEE 802.11 header + fixed fields before IEs
|
|
hdr = binascii.hexlify(req['frame'][0:34]).decode()
|
|
ies = parse_ie(binascii.hexlify(req['frame'][34:]))
|
|
# First elements: SSID, Supported Rates, Extended Supported Rates
|
|
ies1 = ie_hex(ies, 0) + ie_hex(ies, 1) + ie_hex(ies, 50)
|
|
|
|
rsne = ie_hex(ies, 48)
|
|
mde = ie_hex(ies, 54)
|
|
fte = ie_hex(ies, 55)
|
|
tests = []
|
|
# RSN: Trying to use FT, but MDIE not included
|
|
tests += [rsne]
|
|
# RSN: Attempted to use unknown MDIE
|
|
tests += [rsne + "3603000000"]
|
|
# Invalid RSN pairwise cipher
|
|
tests += ["30260100000fac040100000fac030100000fac040000010029208a42cd25c85aa571567dce10dae3"]
|
|
# FT: No PMKID in RSNIE
|
|
tests += ["30160100000fac040100000fac040100000fac0400000000" + ie_hex(ies, 54)]
|
|
# FT: Invalid FTIE
|
|
tests += [rsne + mde]
|
|
# FT: RIC IE(s) in the frame, but not included in protected IE count
|
|
# FT: Failed to parse FT IEs
|
|
tests += [rsne + mde + fte + "3900"]
|
|
# FT: SNonce mismatch in FTIE
|
|
tests += [rsne + mde + "37520000" + 16*"00" + 32*"00" + 32*"00"]
|
|
# FT: ANonce mismatch in FTIE
|
|
tests += [rsne + mde + fte[0:40] + 32*"00" + fte[104:]]
|
|
# FT: No R0KH-ID subelem in FTIE
|
|
tests += [rsne + mde + "3752" + fte[4:168]]
|
|
# FT: R0KH-ID in FTIE did not match with the current R0KH-ID
|
|
tests += [rsne + mde + "3755" + fte[4:168] + "0301ff"]
|
|
# FT: No R1KH-ID subelem in FTIE
|
|
tests += [rsne + mde + "375e" + fte[4:168] + "030a" + binascii.hexlify(b"nas1.w1.fi").decode()]
|
|
# FT: Unknown R1KH-ID used in ReassocReq
|
|
tests += [rsne + mde + "3766" + fte[4:168] + "030a" + binascii.hexlify(b"nas1.w1.fi").decode() + "0106000000000000"]
|
|
# FT: PMKID in Reassoc Req did not match with the PMKR1Name derived from auth request
|
|
tests += [rsne[:-32] + 16*"00" + mde + fte]
|
|
# Invalid MIC in FTIE
|
|
tests += [rsne + mde + fte[0:8] + 16*"00" + fte[40:]]
|
|
for t in tests:
|
|
hapd2ap.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + ies1 + t)
|
|
|
|
def test_ap_ft_reassoc_local_fail(dev, apdev):
|
|
"""WPA2-PSK-FT AP Reassociation Request frame and local failure"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == hapd0.own_addr():
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
|
|
dev[0].scan_for_bss(hapd2ap.own_addr(), freq="2412")
|
|
# FT: Failed to calculate MIC
|
|
with fail_test(hapd2ap, 1, "wpa_ft_validate_reassoc"):
|
|
dev[0].request("ROAM " + hapd2ap.own_addr())
|
|
ev = dev[0].wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=10)
|
|
dev[0].request("DISCONNECT")
|
|
if ev is None:
|
|
raise Exception("Association reject not seen")
|
|
|
|
def test_ap_ft_reassoc_replay(dev, apdev, params):
|
|
"""WPA2-PSK-FT AP and replayed Reassociation Request frame"""
|
|
capfile = os.path.join(params['logdir'], "hwsim0.pcapng")
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == hapd0.own_addr():
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
|
|
dev[0].scan_for_bss(hapd2ap.own_addr(), freq="2412")
|
|
hapd2ap.set("ext_mgmt_frame_handling", "1")
|
|
dev[0].dump_monitor()
|
|
if "OK" not in dev[0].request("ROAM " + hapd2ap.own_addr()):
|
|
raise Exception("ROAM failed")
|
|
|
|
reassocreq = None
|
|
count = 0
|
|
while count < 100:
|
|
req = hapd2ap.mgmt_rx()
|
|
count += 1
|
|
hapd2ap.dump_monitor()
|
|
hapd2ap.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + binascii.hexlify(req['frame']).decode())
|
|
if req['subtype'] == 2:
|
|
reassocreq = req
|
|
ev = hapd2ap.wait_event(["MGMT-TX-STATUS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No TX status seen")
|
|
cmd = "MGMT_TX_STATUS_PROCESS %s" % (" ".join(ev.split(' ')[1:4]))
|
|
if "OK" not in hapd2ap.request(cmd):
|
|
raise Exception("MGMT_TX_STATUS_PROCESS failed")
|
|
break
|
|
hapd2ap.set("ext_mgmt_frame_handling", "0")
|
|
if reassocreq is None:
|
|
raise Exception("No Reassociation Request frame seen")
|
|
dev[0].wait_connected()
|
|
dev[0].dump_monitor()
|
|
hapd2ap.dump_monitor()
|
|
|
|
hwsim_utils.test_connectivity(dev[0], hapd2ap)
|
|
|
|
logger.info("Replay the last Reassociation Request frame")
|
|
hapd2ap.dump_monitor()
|
|
hapd2ap.set("ext_mgmt_frame_handling", "1")
|
|
hapd2ap.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + binascii.hexlify(req['frame']).decode())
|
|
ev = hapd2ap.wait_event(["MGMT-TX-STATUS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No TX status seen")
|
|
cmd = "MGMT_TX_STATUS_PROCESS %s" % (" ".join(ev.split(' ')[1:4]))
|
|
if "OK" not in hapd2ap.request(cmd):
|
|
raise Exception("MGMT_TX_STATUS_PROCESS failed")
|
|
hapd2ap.set("ext_mgmt_frame_handling", "0")
|
|
|
|
try:
|
|
hwsim_utils.test_connectivity(dev[0], hapd2ap)
|
|
ok = True
|
|
except:
|
|
ok = False
|
|
|
|
ap = hapd2ap.own_addr()
|
|
sta = dev[0].own_addr()
|
|
filt = "wlan.fc.type == 2 && " + \
|
|
"wlan.da == " + sta + " && " + \
|
|
"wlan.sa == " + ap + " && " + \
|
|
"wlan.fc.protected == 1"
|
|
fields = ["wlan.ccmp.extiv"]
|
|
res = run_tshark(capfile, filt, fields)
|
|
vals = res.splitlines()
|
|
logger.info("CCMP PN: " + str(vals))
|
|
if len(vals) < 2:
|
|
raise Exception("Could not find all CCMP protected frames from capture")
|
|
if len(set(vals)) < len(vals):
|
|
raise Exception("Duplicate CCMP PN used")
|
|
|
|
if not ok:
|
|
raise Exception("The second hwsim connectivity test failed")
|
|
|
|
def test_ap_ft_psk_file(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PSK from a file"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1a(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_psk_file'] = 'hostapd.wpa_psk'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[1].connect(ssid, psk="very secret",
|
|
key_mgmt="FT-PSK", proto="WPA2", ieee80211w="1",
|
|
scan_freq="2412", wait_connect=False)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].connect(ssid, psk="very secret", key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].connect(ssid, psk="secret passphrase",
|
|
key_mgmt="FT-PSK", proto="WPA2", ieee80211w="1",
|
|
scan_freq="2412")
|
|
dev[2].connect(ssid, psk="another passphrase for all STAs",
|
|
key_mgmt="FT-PSK", proto="WPA2", ieee80211w="1",
|
|
scan_freq="2412")
|
|
ev = dev[1].wait_event(["WPA: 4-Way Handshake failed"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timed out while waiting for failure report")
|
|
dev[1].request("REMOVE_NETWORK all")
|
|
|
|
def test_ap_ft_eap_ap_config_change(dev, apdev):
|
|
"""WPA2-EAP-FT AP changing from 802.1X-only to FT-only"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
bssid = apdev[0]['bssid']
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase, discovery=True)
|
|
params['wpa_key_mgmt'] = "WPA-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
params["r0kh"] = "ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["r1kh"] = "00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff"
|
|
params["eap_server"] = "0"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect(ssid, key_mgmt="FT-EAP WPA-EAP", proto="WPA2",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
|
|
hapd.disable()
|
|
hapd.set('wpa_key_mgmt', "FT-EAP")
|
|
hapd.enable()
|
|
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
|
|
dev[0].request("RECONNECT")
|
|
dev[0].wait_connected()
|
|
|
|
def test_ap_ft_eap_sha384(dev, apdev):
|
|
"""WPA2-EAP-FT with SHA384"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, eap=True,
|
|
sha384=True)
|
|
|
|
def test_ap_ft_eap_sha384_reassoc(dev, apdev):
|
|
"""WPA2-EAP-FT with SHA384 using REASSOCIATE"""
|
|
check_suite_b_192_capa(dev)
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "WPA-EAP-SUITE-B-192 FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "WPA-EAP-SUITE-B-192 FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, eap=True,
|
|
sha384=True, also_non_ft=True, roam_with_reassoc=True)
|
|
|
|
def test_ap_ft_eap_sha384_over_ds(dev, apdev):
|
|
"""WPA2-EAP-FT with SHA384 over DS"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2"
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
eap=True, sha384=True)
|
|
|
|
def test_ap_ft_roam_rrm(dev, apdev):
|
|
"""WPA2-PSK-FT AP and radio measurement request"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["rrm_beacon_report"] = "1"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
bssid0 = hapd0.own_addr()
|
|
|
|
addr = dev[0].own_addr()
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
check_beacon_req(hapd0, addr, 1)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["rrm_beacon_report"] = "1"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
bssid1 = hapd1.own_addr()
|
|
|
|
dev[0].scan_for_bss(bssid1, freq=2412)
|
|
dev[0].roam(bssid1)
|
|
check_beacon_req(hapd1, addr, 2)
|
|
|
|
dev[0].scan_for_bss(bssid0, freq=2412)
|
|
dev[0].roam(bssid0)
|
|
check_beacon_req(hapd0, addr, 3)
|
|
|
|
def test_ap_ft_pmksa_caching(dev, apdev):
|
|
"""FT-EAP and PMKSA caching for initial mobility domain association"""
|
|
ssid = "test-ft"
|
|
identity = "gpsk user"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["mobility_domain"] = "c3d4"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
params = ft_params2(ssid=ssid)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["mobility_domain"] = "c3d4"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, None, eap=True,
|
|
eap_identity=identity, pmksa_caching=True)
|
|
|
|
def test_ap_ft_pmksa_caching_sha384(dev, apdev):
|
|
"""FT-EAP-SHA384 and PMKSA caching for initial mobility domain association"""
|
|
ssid = "test-ft"
|
|
identity = "gpsk user"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid)
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params["mobility_domain"] = "c3d4"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
params = ft_params2(ssid=ssid)
|
|
params['wpa_key_mgmt'] = "FT-EAP-SHA384"
|
|
params["ieee8021x"] = "1"
|
|
params["mobility_domain"] = "c3d4"
|
|
params = dict(list(radius.items()) + list(params.items()))
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, None, eap=True,
|
|
eap_identity=identity, pmksa_caching=True, sha384=True)
|
|
|
|
def test_ap_ft_r1_key_expiration(dev, apdev):
|
|
"""WPA2-PSK-FT and PMK-R1 expiration"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['r1_max_key_lifetime'] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['r1_max_key_lifetime'] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
# This succeeds, but results in having to run another PMK-R1 pull before the
|
|
# second AP can complete FT protocol.
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, wait_before_roam=4)
|
|
|
|
def test_ap_ft_r0_key_expiration(dev, apdev):
|
|
"""WPA2-PSK-FT and PMK-R0 expiration"""
|
|
ssid = "test-ft"
|
|
passphrase = "12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['ft_r0_key_lifetime'] = "2"
|
|
hapd0 = hostapd.add_ap(apdev[0], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['ft_r0_key_lifetime'] = "2"
|
|
hapd1 = hostapd.add_ap(apdev[1], params)
|
|
|
|
bssid2 = run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
return_after_initial=True)
|
|
time.sleep(4)
|
|
dev[0].scan_for_bss(bssid2, freq="2412")
|
|
if "OK" not in dev[0].request("ROAM " + bssid2):
|
|
raise Exception("ROAM failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
|
|
"CTRL-EVENT-AUTH-REJECT",
|
|
"CTRL-EVENT-ASSOC-REJECT"], timeout=5)
|
|
dev[0].request("DISCONNECT")
|
|
if ev is None or "CTRL-EVENT-AUTH-REJECT" not in ev:
|
|
raise Exception("FT protocol failure not reported")
|
|
if "status_code=53" not in ev:
|
|
raise Exception("Unexpected status in FT protocol failure: " + ev)
|
|
|
|
# Generate a new PMK-R0
|
|
dev[0].dump_monitor()
|
|
dev[0].request("RECONNECT")
|
|
dev[0].wait_connected()
|