cf6d08a63f
This new parameter can be used to configure credentials to mandate use of OCSP stapling for AAA server authentication. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
564 lines
19 KiB
Text
564 lines
19 KiB
Text
wpa_supplicant and Hotspot 2.0
|
|
==============================
|
|
|
|
This document describe how the IEEE 802.11u Interworking and Wi-Fi
|
|
Hotspot 2.0 (Release 1) implementation in wpa_supplicant can be
|
|
configured and how an external component on the client e.g., management
|
|
GUI or Wi-Fi framework) is used to manage this functionality.
|
|
|
|
|
|
Introduction to Wi-Fi Hotspot 2.0
|
|
---------------------------------
|
|
|
|
Hotspot 2.0 is the name of the Wi-Fi Alliance specification that is used
|
|
in the Wi-Fi CERTIFIED Passpoint<TM> program. More information about
|
|
this is available in this white paper:
|
|
|
|
http://www.wi-fi.org/knowledge-center/white-papers/wi-fi-certified-passpoint%E2%84%A2-new-program-wi-fi-alliance%C2%AE-enable-seamless
|
|
|
|
The Hotspot 2.0 specification is also available from WFA:
|
|
https://www.wi-fi.org/knowledge-center/published-specifications
|
|
|
|
The core Interworking functionality (network selection, GAS/ANQP) were
|
|
standardized in IEEE Std 802.11u-2011 which is now part of the IEEE Std
|
|
802.11-2012.
|
|
|
|
|
|
wpa_supplicant network selection
|
|
--------------------------------
|
|
|
|
Interworking support added option for configuring credentials that can
|
|
work with multiple networks as an alternative to configuration of
|
|
network blocks (e.g., per-SSID parameters). When requested to perform
|
|
network selection, wpa_supplicant picks the highest priority enabled
|
|
network block or credential. If a credential is picked (based on ANQP
|
|
information from APs), a temporary network block is created
|
|
automatically for the matching network. This temporary network block is
|
|
used similarly to the network blocks that can be configured by the user,
|
|
but it is not stored into the configuration file and is meant to be used
|
|
only for temporary period of time since a new one can be created
|
|
whenever needed based on ANQP information and the credential.
|
|
|
|
By default, wpa_supplicant is not using automatic network selection
|
|
unless requested explicitly with the interworking_select command. This
|
|
can be changed with the auto_interworking=1 parameter to perform network
|
|
selection automatically whenever trying to find a network for connection
|
|
and none of the enabled network blocks match with the scan results. This
|
|
case works similarly to "interworking_select auto", i.e., wpa_supplicant
|
|
will internally determine which network or credential is going to be
|
|
used based on configured priorities, scan results, and ANQP information.
|
|
|
|
|
|
wpa_supplicant configuration
|
|
----------------------------
|
|
|
|
Interworking and Hotspot 2.0 functionality are optional components that
|
|
need to be enabled in the wpa_supplicant build configuration
|
|
(.config). This is done by adding following parameters into that file:
|
|
|
|
CONFIG_INTERWORKING=y
|
|
CONFIG_HS20=y
|
|
|
|
It should be noted that this functionality requires a driver that
|
|
supports GAS/ANQP operations. This uses the same design as P2P, i.e.,
|
|
Action frame processing and building in user space within
|
|
wpa_supplicant. The Linux nl80211 driver interface provides the needed
|
|
functionality for this.
|
|
|
|
|
|
There are number of run-time configuration parameters (e.g., in
|
|
wpa_supplicant.conf when using the configuration file) that can be used
|
|
to control Hotspot 2.0 operations.
|
|
|
|
# Enable Interworking
|
|
interworking=1
|
|
|
|
# Enable Hotspot 2.0
|
|
hs20=1
|
|
|
|
# Parameters for controlling scanning
|
|
|
|
# Homogenous ESS identifier
|
|
# If this is set, scans will be used to request response only from BSSes
|
|
# belonging to the specified Homogeneous ESS. This is used only if interworking
|
|
# is enabled.
|
|
#hessid=00:11:22:33:44:55
|
|
|
|
# Access Network Type
|
|
# When Interworking is enabled, scans can be limited to APs that advertise the
|
|
# specified Access Network Type (0..15; with 15 indicating wildcard match).
|
|
# This value controls the Access Network Type value in Probe Request frames.
|
|
#access_network_type=15
|
|
|
|
# Automatic network selection behavior
|
|
# 0 = do not automatically go through Interworking network selection
|
|
# (i.e., require explicit interworking_select command for this; default)
|
|
# 1 = perform Interworking network selection if one or more
|
|
# credentials have been configured and scan did not find a
|
|
# matching network block
|
|
#auto_interworking=0
|
|
|
|
|
|
Credentials can be pre-configured for automatic network selection:
|
|
|
|
# credential block
|
|
#
|
|
# Each credential used for automatic network selection is configured as a set
|
|
# of parameters that are compared to the information advertised by the APs when
|
|
# interworking_select and interworking_connect commands are used.
|
|
#
|
|
# credential fields:
|
|
#
|
|
# temporary: Whether this credential is temporary and not to be saved
|
|
#
|
|
# priority: Priority group
|
|
# By default, all networks and credentials get the same priority group
|
|
# (0). This field can be used to give higher priority for credentials
|
|
# (and similarly in struct wpa_ssid for network blocks) to change the
|
|
# Interworking automatic networking selection behavior. The matching
|
|
# network (based on either an enabled network block or a credential)
|
|
# with the highest priority value will be selected.
|
|
#
|
|
# pcsc: Use PC/SC and SIM/USIM card
|
|
#
|
|
# realm: Home Realm for Interworking
|
|
#
|
|
# username: Username for Interworking network selection
|
|
#
|
|
# password: Password for Interworking network selection
|
|
#
|
|
# ca_cert: CA certificate for Interworking network selection
|
|
#
|
|
# client_cert: File path to client certificate file (PEM/DER)
|
|
# This field is used with Interworking networking selection for a case
|
|
# where client certificate/private key is used for authentication
|
|
# (EAP-TLS). Full path to the file should be used since working
|
|
# directory may change when wpa_supplicant is run in the background.
|
|
#
|
|
# Alternatively, a named configuration blob can be used by setting
|
|
# this to blob://blob_name.
|
|
#
|
|
# private_key: File path to client private key file (PEM/DER/PFX)
|
|
# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
|
|
# commented out. Both the private key and certificate will be read
|
|
# from the PKCS#12 file in this case. Full path to the file should be
|
|
# used since working directory may change when wpa_supplicant is run
|
|
# in the background.
|
|
#
|
|
# Windows certificate store can be used by leaving client_cert out and
|
|
# configuring private_key in one of the following formats:
|
|
#
|
|
# cert://substring_to_match
|
|
#
|
|
# hash://certificate_thumbprint_in_hex
|
|
#
|
|
# For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
|
|
#
|
|
# Note that when running wpa_supplicant as an application, the user
|
|
# certificate store (My user account) is used, whereas computer store
|
|
# (Computer account) is used when running wpasvc as a service.
|
|
#
|
|
# Alternatively, a named configuration blob can be used by setting
|
|
# this to blob://blob_name.
|
|
#
|
|
# private_key_passwd: Password for private key file
|
|
#
|
|
# imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format
|
|
#
|
|
# milenage: Milenage parameters for SIM/USIM simulator in <Ki>:<OPc>:<SQN>
|
|
# format
|
|
#
|
|
# domain_suffix_match: Constraint for server domain name
|
|
# If set, this FQDN is used as a suffix match requirement for the AAA
|
|
# server certificate in SubjectAltName dNSName element(s). If a
|
|
# matching dNSName is found, this constraint is met. If no dNSName
|
|
# values are present, this constraint is matched against SubjetName CN
|
|
# using same suffix match comparison. Suffix match here means that the
|
|
# host/domain name is compared one label at a time starting from the
|
|
# top-level domain and all the labels in @domain_suffix_match shall be
|
|
# included in the certificate. The certificate may include additional
|
|
# sub-level labels in addition to the required labels.
|
|
#
|
|
# For example, domain_suffix_match=example.com would match
|
|
# test.example.com but would not match test-example.com.
|
|
#
|
|
# domain: Home service provider FQDN(s)
|
|
# This is used to compare against the Domain Name List to figure out
|
|
# whether the AP is operated by the Home SP. Multiple domain entries can
|
|
# be used to configure alternative FQDNs that will be considered home
|
|
# networks.
|
|
#
|
|
# roaming_consortium: Roaming Consortium OI
|
|
# If roaming_consortium_len is non-zero, this field contains the
|
|
# Roaming Consortium OI that can be used to determine which access
|
|
# points support authentication with this credential. This is an
|
|
# alternative to the use of the realm parameter. When using Roaming
|
|
# Consortium to match the network, the EAP parameters need to be
|
|
# pre-configured with the credential since the NAI Realm information
|
|
# may not be available or fetched.
|
|
#
|
|
# eap: Pre-configured EAP method
|
|
# This optional field can be used to specify which EAP method will be
|
|
# used with this credential. If not set, the EAP method is selected
|
|
# automatically based on ANQP information (e.g., NAI Realm).
|
|
#
|
|
# phase1: Pre-configure Phase 1 (outer authentication) parameters
|
|
# This optional field is used with like the 'eap' parameter.
|
|
#
|
|
# phase2: Pre-configure Phase 2 (inner authentication) parameters
|
|
# This optional field is used with like the 'eap' parameter.
|
|
#
|
|
# excluded_ssid: Excluded SSID
|
|
# This optional field can be used to excluded specific SSID(s) from
|
|
# matching with the network. Multiple entries can be used to specify more
|
|
# than one SSID.
|
|
#
|
|
# roaming_partner: Roaming partner information
|
|
# This optional field can be used to configure preferences between roaming
|
|
# partners. The field is a string in following format:
|
|
# <FQDN>,<0/1 exact match>,<priority>,<* or country code>
|
|
# (non-exact match means any subdomain matches the entry; priority is in
|
|
# 0..255 range with 0 being the highest priority)
|
|
#
|
|
# update_identifier: PPS MO ID
|
|
# (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
|
|
#
|
|
# provisioning_sp: FQDN of the SP that provisioned the credential
|
|
# This optional field can be used to keep track of the SP that provisioned
|
|
# the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).
|
|
#
|
|
# sp_priority: Credential priority within a provisioning SP
|
|
# This is the priority of the credential among all credentials
|
|
# provisionined by the same SP (i.e., for entries that have identical
|
|
# provisioning_sp value). The range of this priority is 0-255 with 0
|
|
# being the highest and 255 the lower priority.
|
|
#
|
|
# Minimum backhaul threshold (PPS/<X+>/Policy/MinBackhauldThreshold/*)
|
|
# These fields can be used to specify minimum download/upload backhaul
|
|
# bandwidth that is preferred for the credential. This constraint is
|
|
# ignored if the AP does not advertise WAN Metrics information or if the
|
|
# limit would prevent any connection. Values are in kilobits per second.
|
|
# min_dl_bandwidth_home
|
|
# min_ul_bandwidth_home
|
|
# min_dl_bandwidth_roaming
|
|
# min_ul_bandwidth_roaming
|
|
#
|
|
# max_bss_load: Maximum BSS Load Channel Utilization (1..255)
|
|
# (PPS/<X+>/Policy/MaximumBSSLoadValue)
|
|
# This value is used as the maximum channel utilization for network
|
|
# selection purposes for home networks. If the AP does not advertise
|
|
# BSS Load or if the limit would prevent any connection, this constraint
|
|
# will be ignored.
|
|
#
|
|
# req_conn_capab: Required connection capability
|
|
# (PPS/<X+>/Policy/RequiredProtoPortTuple)
|
|
# This value is used to configure set of required protocol/port pairs that
|
|
# a roaming network shall support (include explicitly in Connection
|
|
# Capability ANQP element). This constraint is ignored if the AP does not
|
|
# advertise Connection Capability or if this constraint would prevent any
|
|
# network connection. This policy is not used in home networks.
|
|
# Format: <protocol>[:<comma-separated list of ports]
|
|
# Multiple entries can be used to list multiple requirements.
|
|
# For example, number of common TCP protocols:
|
|
# req_conn_capab=6,22,80,443
|
|
# For example, IPSec/IKE:
|
|
# req_conn_capab=17:500
|
|
# req_conn_capab=50
|
|
#
|
|
# ocsp: Whether to use/require OCSP to check server certificate
|
|
# 0 = do not use OCSP stapling (TLS certificate status extension)
|
|
# 1 = try to use OCSP stapling, but not require response
|
|
# 2 = require valid OCSP stapling response
|
|
#
|
|
# for example:
|
|
#
|
|
#cred={
|
|
# realm="example.com"
|
|
# username="user@example.com"
|
|
# password="password"
|
|
# ca_cert="/etc/wpa_supplicant/ca.pem"
|
|
# domain="example.com"
|
|
# domain_suffix_match="example.com"
|
|
#}
|
|
#
|
|
#cred={
|
|
# imsi="310026-000000000"
|
|
# milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82"
|
|
#}
|
|
#
|
|
#cred={
|
|
# realm="example.com"
|
|
# username="user"
|
|
# password="password"
|
|
# ca_cert="/etc/wpa_supplicant/ca.pem"
|
|
# domain="example.com"
|
|
# roaming_consortium=223344
|
|
# eap=TTLS
|
|
# phase2="auth=MSCHAPV2"
|
|
#}
|
|
|
|
|
|
Control interface
|
|
-----------------
|
|
|
|
wpa_supplicant provides a control interface that can be used from
|
|
external programs to manage various operations. The included command
|
|
line tool, wpa_cli, can be used for manual testing with this interface.
|
|
|
|
Following wpa_cli interactive mode commands show some examples of manual
|
|
operations related to Hotspot 2.0:
|
|
|
|
Remove configured networks and credentials:
|
|
|
|
> remove_network all
|
|
OK
|
|
> remove_cred all
|
|
OK
|
|
|
|
|
|
Add a username/password credential:
|
|
|
|
> add_cred
|
|
0
|
|
> set_cred 0 realm "mail.example.com"
|
|
OK
|
|
> set_cred 0 username "username"
|
|
OK
|
|
> set_cred 0 password "password"
|
|
OK
|
|
> set_cred 0 priority 1
|
|
OK
|
|
> set_cred 0 temporary 1
|
|
OK
|
|
|
|
Add a SIM credential using a simulated SIM/USIM card for testing:
|
|
|
|
> add_cred
|
|
1
|
|
> set_cred 1 imsi "23456-0000000000"
|
|
OK
|
|
> set_cred 1 milenage "90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123"
|
|
OK
|
|
> set_cred 1 priority 1
|
|
OK
|
|
|
|
Note: the return value of add_cred is used as the first argument to
|
|
the following set_cred commands.
|
|
|
|
Add a SIM credential using a external SIM/USIM processing:
|
|
|
|
> set external_sim 1
|
|
OK
|
|
> add_cred
|
|
1
|
|
> set_cred 1 imsi "23456-0000000000"
|
|
OK
|
|
> set_cred 1 eap SIM
|
|
OK
|
|
|
|
|
|
Add a WPA2-Enterprise network:
|
|
|
|
> add_network
|
|
0
|
|
> set_network 0 key_mgmt WPA-EAP
|
|
OK
|
|
> set_network 0 ssid "enterprise"
|
|
OK
|
|
> set_network 0 eap TTLS
|
|
OK
|
|
> set_network 0 anonymous_identity "anonymous"
|
|
OK
|
|
> set_network 0 identity "user"
|
|
OK
|
|
> set_network 0 password "password"
|
|
OK
|
|
> set_network 0 priority 0
|
|
OK
|
|
> enable_network 0 no-connect
|
|
OK
|
|
|
|
|
|
Add an open network:
|
|
|
|
> add_network
|
|
3
|
|
> set_network 3 key_mgmt NONE
|
|
OK
|
|
> set_network 3 ssid "coffee-shop"
|
|
OK
|
|
> select_network 3
|
|
OK
|
|
|
|
Note: the return value of add_network is used as the first argument to
|
|
the following set_network commands.
|
|
|
|
The preferred credentials/networks can be indicated with the priority
|
|
parameter (1 is higher priority than 0).
|
|
|
|
|
|
Interworking network selection can be started with interworking_select
|
|
command. This instructs wpa_supplicant to run a network scan and iterate
|
|
through the discovered APs to request ANQP information from the APs that
|
|
advertise support for Interworking/Hotspot 2.0:
|
|
|
|
> interworking_select
|
|
OK
|
|
<3>Starting ANQP fetch for 02:00:00:00:01:00
|
|
<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
|
|
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
|
|
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
|
|
<3>ANQP fetch completed
|
|
<3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
|
|
|
|
|
|
INTERWORKING-AP event messages indicate the APs that support network
|
|
selection and for which there is a matching
|
|
credential. interworking_connect command can be used to select a network
|
|
to connect with:
|
|
|
|
|
|
> interworking_connect 02:00:00:00:01:00
|
|
OK
|
|
<3>CTRL-EVENT-SCAN-RESULTS
|
|
<3>SME: Trying to authenticate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
|
|
<3>Trying to associate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
|
|
<3>Associated with 02:00:00:00:01:00
|
|
<3>CTRL-EVENT-EAP-STARTED EAP authentication started
|
|
<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
|
|
<3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
|
|
<3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
|
|
<3>WPA: Key negotiation completed with 02:00:00:00:01:00 [PTK=CCMP GTK=CCMP]
|
|
<3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (auth) [id=0 id_str=]
|
|
|
|
|
|
wpa_supplicant creates a temporary network block for the selected
|
|
network based on the configured credential and ANQP information from the
|
|
AP:
|
|
|
|
> list_networks
|
|
network id / ssid / bssid / flags
|
|
0 Example Network any [CURRENT]
|
|
> get_network 0 key_mgmt
|
|
WPA-EAP
|
|
> get_network 0 eap
|
|
TTLS
|
|
|
|
|
|
Alternatively to using an external program to select the network,
|
|
"interworking_select auto" command can be used to request wpa_supplicant
|
|
to select which network to use based on configured priorities:
|
|
|
|
|
|
> remove_network all
|
|
OK
|
|
<3>CTRL-EVENT-DISCONNECTED bssid=02:00:00:00:01:00 reason=1 locally_generated=1
|
|
> interworking_select auto
|
|
OK
|
|
<3>Starting ANQP fetch for 02:00:00:00:01:00
|
|
<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
|
|
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
|
|
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
|
|
<3>ANQP fetch completed
|
|
<3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
|
|
<3>CTRL-EVENT-SCAN-RESULTS
|
|
<3>SME: Trying to authenticate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
|
|
<3>Trying to associate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
|
|
<3>Associated with 02:00:00:00:01:00
|
|
<3>CTRL-EVENT-EAP-STARTED EAP authentication started
|
|
<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
|
|
<3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
|
|
<3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
|
|
<3>WPA: Key negotiation completed with 02:00:00:00:01:00 [PTK=CCMP GTK=CCMP]
|
|
<3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (reauth) [id=0 id_str=]
|
|
|
|
|
|
The connection status can be shown with the status command:
|
|
|
|
> status
|
|
bssid=02:00:00:00:01:00
|
|
ssid=Example Network
|
|
id=0
|
|
mode=station
|
|
pairwise_cipher=CCMP <--- link layer security indication
|
|
group_cipher=CCMP
|
|
key_mgmt=WPA2/IEEE 802.1X/EAP
|
|
wpa_state=COMPLETED
|
|
p2p_device_address=02:00:00:00:00:00
|
|
address=02:00:00:00:00:00
|
|
hs20=1 <--- HS 2.0 indication
|
|
Supplicant PAE state=AUTHENTICATED
|
|
suppPortStatus=Authorized
|
|
EAP state=SUCCESS
|
|
selectedMethod=21 (EAP-TTLS)
|
|
EAP TLS cipher=AES-128-SHA
|
|
EAP-TTLSv0 Phase2 method=PAP
|
|
|
|
|
|
> status
|
|
bssid=02:00:00:00:02:00
|
|
ssid=coffee-shop
|
|
id=3
|
|
mode=station
|
|
pairwise_cipher=NONE
|
|
group_cipher=NONE
|
|
key_mgmt=NONE
|
|
wpa_state=COMPLETED
|
|
p2p_device_address=02:00:00:00:00:00
|
|
address=02:00:00:00:00:00
|
|
|
|
|
|
Note: The Hotspot 2.0 indication is shown as "hs20=1" in the status
|
|
command output. Link layer security is indicated with the
|
|
pairwise_cipher (CCMP = secure, NONE = no encryption used).
|
|
|
|
|
|
Also the scan results include the Hotspot 2.0 indication:
|
|
|
|
> scan_results
|
|
bssid / frequency / signal level / flags / ssid
|
|
02:00:00:00:01:00 2412 -30 [WPA2-EAP-CCMP][ESS][HS20] Example Network
|
|
|
|
|
|
ANQP information for the BSS can be fetched using the BSS command:
|
|
|
|
> bss 02:00:00:00:01:00
|
|
id=1
|
|
bssid=02:00:00:00:01:00
|
|
freq=2412
|
|
beacon_int=100
|
|
capabilities=0x0411
|
|
qual=0
|
|
noise=-92
|
|
level=-30
|
|
tsf=1345573286517276
|
|
age=105
|
|
ie=000f4578616d706c65204e6574776f726b010882848b960c1218240301012a010432043048606c30140100000fac040100000fac040100000fac0100007f04000000806b091e07010203040506076c027f006f1001531122331020304050010203040506dd05506f9a1000
|
|
flags=[WPA2-EAP-CCMP][ESS][HS20]
|
|
ssid=Example Network
|
|
anqp_roaming_consortium=031122330510203040500601020304050603fedcba
|
|
|
|
|
|
ANQP queries can also be requested with the anqp_get and hs20_anqp_get
|
|
commands:
|
|
|
|
> anqp_get 02:00:00:00:01:00 261
|
|
OK
|
|
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
|
|
> hs20_anqp_get 02:00:00:00:01:00 2
|
|
OK
|
|
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
|
|
|
|
In addition, fetch_anqp command can be used to request similar set of
|
|
ANQP queries to be done as is run as part of interworking_select:
|
|
|
|
> scan
|
|
OK
|
|
<3>CTRL-EVENT-SCAN-RESULTS
|
|
> fetch_anqp
|
|
OK
|
|
<3>Starting ANQP fetch for 02:00:00:00:01:00
|
|
<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
|
|
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
|
|
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
|
|
<3>ANQP fetch completed
|