463c8ffbd5
Credentials can now be configured with more than one FQDN ('domain'
field in the cred block) to perform Domain Name List matching against
multiple home domains.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
1254 lines
49 KiB
Text
1254 lines
49 KiB
Text
##### Example wpa_supplicant configuration file ###############################
|
||
#
|
||
# This file describes configuration file format and lists all available option.
|
||
# Please also take a look at simpler configuration examples in 'examples'
|
||
# subdirectory.
|
||
#
|
||
# Empty lines and lines starting with # are ignored
|
||
|
||
# NOTE! This file may contain password information and should probably be made
|
||
# readable only by root user on multiuser systems.
|
||
|
||
# Note: All file paths in this configuration file should use full (absolute,
|
||
# not relative to working directory) path in order to allow working directory
|
||
# to be changed. This can happen if wpa_supplicant is run in the background.
|
||
|
||
# Whether to allow wpa_supplicant to update (overwrite) configuration
|
||
#
|
||
# This option can be used to allow wpa_supplicant to overwrite configuration
|
||
# file whenever configuration is changed (e.g., new network block is added with
|
||
# wpa_cli or wpa_gui, or a password is changed). This is required for
|
||
# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
|
||
# Please note that overwriting configuration file will remove the comments from
|
||
# it.
|
||
#update_config=1
|
||
|
||
# global configuration (shared by all network blocks)
|
||
#
|
||
# Parameters for the control interface. If this is specified, wpa_supplicant
|
||
# will open a control interface that is available for external programs to
|
||
# manage wpa_supplicant. The meaning of this string depends on which control
|
||
# interface mechanism is used. For all cases, the existence of this parameter
|
||
# in configuration is used to determine whether the control interface is
|
||
# enabled.
|
||
#
|
||
# For UNIX domain sockets (default on Linux and BSD): This is a directory that
|
||
# will be created for UNIX domain sockets for listening to requests from
|
||
# external programs (CLI/GUI, etc.) for status information and configuration.
|
||
# The socket file will be named based on the interface name, so multiple
|
||
# wpa_supplicant processes can be run at the same time if more than one
|
||
# interface is used.
|
||
# /var/run/wpa_supplicant is the recommended directory for sockets and by
|
||
# default, wpa_cli will use it when trying to connect with wpa_supplicant.
|
||
#
|
||
# Access control for the control interface can be configured by setting the
|
||
# directory to allow only members of a group to use sockets. This way, it is
|
||
# possible to run wpa_supplicant as root (since it needs to change network
|
||
# configuration and open raw sockets) and still allow GUI/CLI components to be
|
||
# run as non-root users. However, since the control interface can be used to
|
||
# change the network configuration, this access needs to be protected in many
|
||
# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
|
||
# want to allow non-root users to use the control interface, add a new group
|
||
# and change this value to match with that group. Add users that should have
|
||
# control interface access to this group. If this variable is commented out or
|
||
# not included in the configuration file, group will not be changed from the
|
||
# value it got by default when the directory or socket was created.
|
||
#
|
||
# When configuring both the directory and group, use following format:
|
||
# DIR=/var/run/wpa_supplicant GROUP=wheel
|
||
# DIR=/var/run/wpa_supplicant GROUP=0
|
||
# (group can be either group name or gid)
|
||
#
|
||
# For UDP connections (default on Windows): The value will be ignored. This
|
||
# variable is just used to select that the control interface is to be created.
|
||
# The value can be set to, e.g., udp (ctrl_interface=udp)
|
||
#
|
||
# For Windows Named Pipe: This value can be used to set the security descriptor
|
||
# for controlling access to the control interface. Security descriptor can be
|
||
# set using Security Descriptor String Format (see http://msdn.microsoft.com/
|
||
# library/default.asp?url=/library/en-us/secauthz/security/
|
||
# security_descriptor_string_format.asp). The descriptor string needs to be
|
||
# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
|
||
# DACL (which will reject all connections). See README-Windows.txt for more
|
||
# information about SDDL string format.
|
||
#
|
||
ctrl_interface=/var/run/wpa_supplicant
|
||
|
||
# IEEE 802.1X/EAPOL version
|
||
# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
|
||
# EAPOL version 2. However, there are many APs that do not handle the new
|
||
# version number correctly (they seem to drop the frames completely). In order
|
||
# to make wpa_supplicant interoperate with these APs, the version number is set
|
||
# to 1 by default. This configuration value can be used to set it to the new
|
||
# version (2).
|
||
eapol_version=1
|
||
|
||
# AP scanning/selection
|
||
# By default, wpa_supplicant requests driver to perform AP scanning and then
|
||
# uses the scan results to select a suitable AP. Another alternative is to
|
||
# allow the driver to take care of AP scanning and selection and use
|
||
# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
|
||
# information from the driver.
|
||
# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to
|
||
# the currently enabled networks are found, a new network (IBSS or AP mode
|
||
# operation) may be initialized (if configured) (default)
|
||
# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
|
||
# parameters (e.g., WPA IE generation); this mode can also be used with
|
||
# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
|
||
# APs (i.e., external program needs to control association). This mode must
|
||
# also be used when using wired Ethernet drivers.
|
||
# 2: like 0, but associate with APs using security policy and SSID (but not
|
||
# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
|
||
# enable operation with hidden SSIDs and optimized roaming; in this mode,
|
||
# the network blocks in the configuration file are tried one by one until
|
||
# the driver reports successful association; each network block should have
|
||
# explicit security policy (i.e., only one option in the lists) for
|
||
# key_mgmt, pairwise, group, proto variables
|
||
# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
|
||
# created immediately regardless of scan results. ap_scan=1 mode will first try
|
||
# to scan for existing networks and only if no matches with the enabled
|
||
# networks are found, a new IBSS or AP mode network is created.
|
||
ap_scan=1
|
||
|
||
# EAP fast re-authentication
|
||
# By default, fast re-authentication is enabled for all EAP methods that
|
||
# support it. This variable can be used to disable fast re-authentication.
|
||
# Normally, there is no need to disable this.
|
||
fast_reauth=1
|
||
|
||
# OpenSSL Engine support
|
||
# These options can be used to load OpenSSL engines.
|
||
# The two engines that are supported currently are shown below:
|
||
# They are both from the opensc project (http://www.opensc.org/)
|
||
# By default no engines are loaded.
|
||
# make the opensc engine available
|
||
#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
|
||
# make the pkcs11 engine available
|
||
#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
|
||
# configure the path to the pkcs11 module required by the pkcs11 engine
|
||
#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
|
||
|
||
# Dynamic EAP methods
|
||
# If EAP methods were built dynamically as shared object files, they need to be
|
||
# loaded here before being used in the network blocks. By default, EAP methods
|
||
# are included statically in the build, so these lines are not needed
|
||
#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
|
||
#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
|
||
|
||
# Driver interface parameters
|
||
# This field can be used to configure arbitrary driver interace parameters. The
|
||
# format is specific to the selected driver interface. This field is not used
|
||
# in most cases.
|
||
#driver_param="field=value"
|
||
|
||
# Country code
|
||
# The ISO/IEC alpha2 country code for the country in which this device is
|
||
# currently operating.
|
||
#country=US
|
||
|
||
# Maximum lifetime for PMKSA in seconds; default 43200
|
||
#dot11RSNAConfigPMKLifetime=43200
|
||
# Threshold for reauthentication (percentage of PMK lifetime); default 70
|
||
#dot11RSNAConfigPMKReauthThreshold=70
|
||
# Timeout for security association negotiation in seconds; default 60
|
||
#dot11RSNAConfigSATimeout=60
|
||
|
||
# Wi-Fi Protected Setup (WPS) parameters
|
||
|
||
# Universally Unique IDentifier (UUID; see RFC 4122) of the device
|
||
# If not configured, UUID will be generated based on the local MAC address.
|
||
#uuid=12345678-9abc-def0-1234-56789abcdef0
|
||
|
||
# Device Name
|
||
# User-friendly description of device; up to 32 octets encoded in UTF-8
|
||
#device_name=Wireless Client
|
||
|
||
# Manufacturer
|
||
# The manufacturer of the device (up to 64 ASCII characters)
|
||
#manufacturer=Company
|
||
|
||
# Model Name
|
||
# Model of the device (up to 32 ASCII characters)
|
||
#model_name=cmodel
|
||
|
||
# Model Number
|
||
# Additional device description (up to 32 ASCII characters)
|
||
#model_number=123
|
||
|
||
# Serial Number
|
||
# Serial number of the device (up to 32 characters)
|
||
#serial_number=12345
|
||
|
||
# Primary Device Type
|
||
# Used format: <categ>-<OUI>-<subcateg>
|
||
# categ = Category as an integer value
|
||
# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
|
||
# default WPS OUI
|
||
# subcateg = OUI-specific Sub Category as an integer value
|
||
# Examples:
|
||
# 1-0050F204-1 (Computer / PC)
|
||
# 1-0050F204-2 (Computer / Server)
|
||
# 5-0050F204-1 (Storage / NAS)
|
||
# 6-0050F204-1 (Network Infrastructure / AP)
|
||
#device_type=1-0050F204-1
|
||
|
||
# OS Version
|
||
# 4-octet operating system version number (hex string)
|
||
#os_version=01020300
|
||
|
||
# Config Methods
|
||
# List of the supported configuration methods
|
||
# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
|
||
# nfc_interface push_button keypad virtual_display physical_display
|
||
# virtual_push_button physical_push_button
|
||
# For WSC 1.0:
|
||
#config_methods=label display push_button keypad
|
||
# For WSC 2.0:
|
||
#config_methods=label virtual_display virtual_push_button keypad
|
||
|
||
# Credential processing
|
||
# 0 = process received credentials internally (default)
|
||
# 1 = do not process received credentials; just pass them over ctrl_iface to
|
||
# external program(s)
|
||
# 2 = process received credentials internally and pass them over ctrl_iface
|
||
# to external program(s)
|
||
#wps_cred_processing=0
|
||
|
||
# Vendor attribute in WPS M1, e.g., Windows 7 Vertical Pairing
|
||
# The vendor attribute contents to be added in M1 (hex string)
|
||
#wps_vendor_ext_m1=000137100100020001
|
||
|
||
# NFC password token for WPS
|
||
# These parameters can be used to configure a fixed NFC password token for the
|
||
# station. This can be generated, e.g., with nfc_pw_token. When these
|
||
# parameters are used, the station is assumed to be deployed with a NFC tag
|
||
# that includes the matching NFC password token (e.g., written based on the
|
||
# NDEF record from nfc_pw_token).
|
||
#
|
||
#wps_nfc_dev_pw_id: Device Password ID (16..65535)
|
||
#wps_nfc_dh_pubkey: Hexdump of DH Public Key
|
||
#wps_nfc_dh_privkey: Hexdump of DH Private Key
|
||
#wps_nfc_dev_pw: Hexdump of Device Password
|
||
|
||
# Maximum number of BSS entries to keep in memory
|
||
# Default: 200
|
||
# This can be used to limit memory use on the BSS entries (cached scan
|
||
# results). A larger value may be needed in environments that have huge number
|
||
# of APs when using ap_scan=1 mode.
|
||
#bss_max_count=200
|
||
|
||
# Automatic scan
|
||
# This is an optional set of parameters for automatic scanning
|
||
# within an interface in following format:
|
||
#autoscan=<autoscan module name>:<module parameters>
|
||
# autoscan is like bgscan but on disconnected or inactive state.
|
||
# For instance, on exponential module parameters would be <base>:<limit>
|
||
#autoscan=exponential:3:300
|
||
# Which means a delay between scans on a base exponential of 3,
|
||
# up to the limit of 300 seconds (3, 9, 27 ... 300)
|
||
# For periodic module, parameters would be <fixed interval>
|
||
#autoscan=periodic:30
|
||
# So a delay of 30 seconds will be applied between each scan
|
||
|
||
# filter_ssids - SSID-based scan result filtering
|
||
# 0 = do not filter scan results (default)
|
||
# 1 = only include configured SSIDs in scan results/BSS table
|
||
#filter_ssids=0
|
||
|
||
# Password (and passphrase, etc.) backend for external storage
|
||
# format: <backend name>[:<optional backend parameters>]
|
||
#ext_password_backend=test:pw1=password|pw2=testing
|
||
|
||
# Timeout in seconds to detect STA inactivity (default: 300 seconds)
|
||
#
|
||
# This timeout value is used in P2P GO mode to clean up
|
||
# inactive stations.
|
||
#p2p_go_max_inactivity=300
|
||
|
||
# Opportunistic Key Caching (also known as Proactive Key Caching) default
|
||
# This parameter can be used to set the default behavior for the
|
||
# proactive_key_caching parameter. By default, OKC is disabled unless enabled
|
||
# with the global okc=1 parameter or with the per-network
|
||
# proactive_key_caching=1 parameter. With okc=1, OKC is enabled by default, but
|
||
# can be disabled with per-network proactive_key_caching=0 parameter.
|
||
#okc=0
|
||
|
||
# Protected Management Frames default
|
||
# This parameter can be used to set the default behavior for the ieee80211w
|
||
# parameter. By default, PMF is disabled unless enabled with the global pmf=1/2
|
||
# parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF
|
||
# is enabled/required by default, but can be disabled with the per-network
|
||
# ieee80211w parameter.
|
||
#pmf=0
|
||
|
||
# Enabled SAE finite cyclic groups in preference order
|
||
# By default (if this parameter is not set), the mandatory group 19 (ECC group
|
||
# defined over a 256-bit prime order field) is preferred, but other groups are
|
||
# also enabled. If this parameter is set, the groups will be tried in the
|
||
# indicated order. The group values are listed in the IANA registry:
|
||
# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
|
||
#sae_groups=21 20 19 26 25
|
||
|
||
# Default value for DTIM period (if not overridden in network block)
|
||
#dtim_period=2
|
||
|
||
# Default value for Beacon interval (if not overridden in network block)
|
||
#beacon_int=100
|
||
|
||
# Additional vendor specific elements for Beacon and Probe Response frames
|
||
# This parameter can be used to add additional vendor specific element(s) into
|
||
# the end of the Beacon and Probe Response frames. The format for these
|
||
# element(s) is a hexdump of the raw information elements (id+len+payload for
|
||
# one or more elements). This is used in AP and P2P GO modes.
|
||
#ap_vendor_elements=dd0411223301
|
||
|
||
# Ignore scan results older than request
|
||
#
|
||
# The driver may have a cache of scan results that makes it return
|
||
# information that is older than our scan trigger. This parameter can
|
||
# be used to configure such old information to be ignored instead of
|
||
# allowing it to update the internal BSS table.
|
||
#ignore_old_scan_res=0
|
||
|
||
# scan_cur_freq: Whether to scan only the current frequency
|
||
# 0: Scan all available frequencies. (Default)
|
||
# 1: Scan current operating frequency if another VIF on the same radio
|
||
# is already associated.
|
||
|
||
# Interworking (IEEE 802.11u)
|
||
|
||
# Enable Interworking
|
||
# interworking=1
|
||
|
||
# Homogenous ESS identifier
|
||
# If this is set, scans will be used to request response only from BSSes
|
||
# belonging to the specified Homogeneous ESS. This is used only if interworking
|
||
# is enabled.
|
||
# hessid=00:11:22:33:44:55
|
||
|
||
# Automatic network selection behavior
|
||
# 0 = do not automatically go through Interworking network selection
|
||
# (i.e., require explicit interworking_select command for this; default)
|
||
# 1 = perform Interworking network selection if one or more
|
||
# credentials have been configured and scan did not find a
|
||
# matching network block
|
||
#auto_interworking=0
|
||
|
||
# credential block
|
||
#
|
||
# Each credential used for automatic network selection is configured as a set
|
||
# of parameters that are compared to the information advertised by the APs when
|
||
# interworking_select and interworking_connect commands are used.
|
||
#
|
||
# credential fields:
|
||
#
|
||
# priority: Priority group
|
||
# By default, all networks and credentials get the same priority group
|
||
# (0). This field can be used to give higher priority for credentials
|
||
# (and similarly in struct wpa_ssid for network blocks) to change the
|
||
# Interworking automatic networking selection behavior. The matching
|
||
# network (based on either an enabled network block or a credential)
|
||
# with the highest priority value will be selected.
|
||
#
|
||
# pcsc: Use PC/SC and SIM/USIM card
|
||
#
|
||
# realm: Home Realm for Interworking
|
||
#
|
||
# username: Username for Interworking network selection
|
||
#
|
||
# password: Password for Interworking network selection
|
||
#
|
||
# ca_cert: CA certificate for Interworking network selection
|
||
#
|
||
# client_cert: File path to client certificate file (PEM/DER)
|
||
# This field is used with Interworking networking selection for a case
|
||
# where client certificate/private key is used for authentication
|
||
# (EAP-TLS). Full path to the file should be used since working
|
||
# directory may change when wpa_supplicant is run in the background.
|
||
#
|
||
# Alternatively, a named configuration blob can be used by setting
|
||
# this to blob://blob_name.
|
||
#
|
||
# private_key: File path to client private key file (PEM/DER/PFX)
|
||
# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
|
||
# commented out. Both the private key and certificate will be read
|
||
# from the PKCS#12 file in this case. Full path to the file should be
|
||
# used since working directory may change when wpa_supplicant is run
|
||
# in the background.
|
||
#
|
||
# Windows certificate store can be used by leaving client_cert out and
|
||
# configuring private_key in one of the following formats:
|
||
#
|
||
# cert://substring_to_match
|
||
#
|
||
# hash://certificate_thumbprint_in_hex
|
||
#
|
||
# For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
|
||
#
|
||
# Note that when running wpa_supplicant as an application, the user
|
||
# certificate store (My user account) is used, whereas computer store
|
||
# (Computer account) is used when running wpasvc as a service.
|
||
#
|
||
# Alternatively, a named configuration blob can be used by setting
|
||
# this to blob://blob_name.
|
||
#
|
||
# private_key_passwd: Password for private key file
|
||
#
|
||
# imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format
|
||
#
|
||
# milenage: Milenage parameters for SIM/USIM simulator in <Ki>:<OPc>:<SQN>
|
||
# format
|
||
#
|
||
# domain: Home service provider FQDN(s)
|
||
# This is used to compare against the Domain Name List to figure out
|
||
# whether the AP is operated by the Home SP. Multiple domain entries can
|
||
# be used to configure alternative FQDNs that will be considered home
|
||
# networks.
|
||
#
|
||
# roaming_consortium: Roaming Consortium OI
|
||
# If roaming_consortium_len is non-zero, this field contains the
|
||
# Roaming Consortium OI that can be used to determine which access
|
||
# points support authentication with this credential. This is an
|
||
# alternative to the use of the realm parameter. When using Roaming
|
||
# Consortium to match the network, the EAP parameters need to be
|
||
# pre-configured with the credential since the NAI Realm information
|
||
# may not be available or fetched.
|
||
#
|
||
# eap: Pre-configured EAP method
|
||
# This optional field can be used to specify which EAP method will be
|
||
# used with this credential. If not set, the EAP method is selected
|
||
# automatically based on ANQP information (e.g., NAI Realm).
|
||
#
|
||
# phase1: Pre-configure Phase 1 (outer authentication) parameters
|
||
# This optional field is used with like the 'eap' parameter.
|
||
#
|
||
# phase2: Pre-configure Phase 2 (inner authentication) parameters
|
||
# This optional field is used with like the 'eap' parameter.
|
||
#
|
||
# excluded_ssid: Excluded SSID
|
||
# This optional field can be used to excluded specific SSID(s) from
|
||
# matching with the network. Multiple entries can be used to specify more
|
||
# than one SSID.
|
||
#
|
||
# for example:
|
||
#
|
||
#cred={
|
||
# realm="example.com"
|
||
# username="user@example.com"
|
||
# password="password"
|
||
# ca_cert="/etc/wpa_supplicant/ca.pem"
|
||
# domain="example.com"
|
||
#}
|
||
#
|
||
#cred={
|
||
# imsi="310026-000000000"
|
||
# milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82"
|
||
#}
|
||
#
|
||
#cred={
|
||
# realm="example.com"
|
||
# username="user"
|
||
# password="password"
|
||
# ca_cert="/etc/wpa_supplicant/ca.pem"
|
||
# domain="example.com"
|
||
# roaming_consortium=223344
|
||
# eap=TTLS
|
||
# phase2="auth=MSCHAPV2"
|
||
#}
|
||
|
||
# Hotspot 2.0
|
||
# hs20=1
|
||
|
||
# network block
|
||
#
|
||
# Each network (usually AP's sharing the same SSID) is configured as a separate
|
||
# block in this configuration file. The network blocks are in preference order
|
||
# (the first match is used).
|
||
#
|
||
# network block fields:
|
||
#
|
||
# disabled:
|
||
# 0 = this network can be used (default)
|
||
# 1 = this network block is disabled (can be enabled through ctrl_iface,
|
||
# e.g., with wpa_cli or wpa_gui)
|
||
#
|
||
# id_str: Network identifier string for external scripts. This value is passed
|
||
# to external action script through wpa_cli as WPA_ID_STR environment
|
||
# variable to make it easier to do network specific configuration.
|
||
#
|
||
# ssid: SSID (mandatory); network name in one of the optional formats:
|
||
# - an ASCII string with double quotation
|
||
# - a hex string (two characters per octet of SSID)
|
||
# - a printf-escaped ASCII string P"<escaped string>"
|
||
#
|
||
# scan_ssid:
|
||
# 0 = do not scan this SSID with specific Probe Request frames (default)
|
||
# 1 = scan with SSID-specific Probe Request frames (this can be used to
|
||
# find APs that do not accept broadcast SSID or use multiple SSIDs;
|
||
# this will add latency to scanning, so enable this only when needed)
|
||
#
|
||
# bssid: BSSID (optional); if set, this network block is used only when
|
||
# associating with the AP using the configured BSSID
|
||
#
|
||
# priority: priority group (integer)
|
||
# By default, all networks will get same priority group (0). If some of the
|
||
# networks are more desirable, this field can be used to change the order in
|
||
# which wpa_supplicant goes through the networks when selecting a BSS. The
|
||
# priority groups will be iterated in decreasing priority (i.e., the larger the
|
||
# priority value, the sooner the network is matched against the scan results).
|
||
# Within each priority group, networks will be selected based on security
|
||
# policy, signal strength, etc.
|
||
# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
|
||
# using this priority to select the order for scanning. Instead, they try the
|
||
# networks in the order that used in the configuration file.
|
||
#
|
||
# mode: IEEE 802.11 operation mode
|
||
# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
|
||
# 1 = IBSS (ad-hoc, peer-to-peer)
|
||
# 2 = AP (access point)
|
||
# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
|
||
# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). WPA-None requires
|
||
# following network block options:
|
||
# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
|
||
# both), and psk must also be set.
|
||
#
|
||
# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
|
||
# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
|
||
# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
|
||
# In addition, this value is only used by the station that creates the IBSS. If
|
||
# an IBSS network with the configured SSID is already present, the frequency of
|
||
# the network will be used instead of this configured value.
|
||
#
|
||
# scan_freq: List of frequencies to scan
|
||
# Space-separated list of frequencies in MHz to scan when searching for this
|
||
# BSS. If the subset of channels used by the network is known, this option can
|
||
# be used to optimize scanning to not occur on channels that the network does
|
||
# not use. Example: scan_freq=2412 2437 2462
|
||
#
|
||
# freq_list: Array of allowed frequencies
|
||
# Space-separated list of frequencies in MHz to allow for selecting the BSS. If
|
||
# set, scan results that do not match any of the specified frequencies are not
|
||
# considered when selecting a BSS.
|
||
#
|
||
# This can also be set on the outside of the network block. In this case,
|
||
# it limits the frequencies that will be scanned.
|
||
#
|
||
# bgscan: Background scanning
|
||
# wpa_supplicant behavior for background scanning can be specified by
|
||
# configuring a bgscan module. These modules are responsible for requesting
|
||
# background scans for the purpose of roaming within an ESS (i.e., within a
|
||
# single network block with all the APs using the same SSID). The bgscan
|
||
# parameter uses following format: "<bgscan module name>:<module parameters>"
|
||
# Following bgscan modules are available:
|
||
# simple - Periodic background scans based on signal strength
|
||
# bgscan="simple:<short bgscan interval in seconds>:<signal strength threshold>:
|
||
# <long interval>"
|
||
# bgscan="simple:30:-45:300"
|
||
# learn - Learn channels used by the network and try to avoid bgscans on other
|
||
# channels (experimental)
|
||
# bgscan="learn:<short bgscan interval in seconds>:<signal strength threshold>:
|
||
# <long interval>[:<database file name>]"
|
||
# bgscan="learn:30:-45:300:/etc/wpa_supplicant/network1.bgscan"
|
||
#
|
||
# proto: list of accepted protocols
|
||
# WPA = WPA/IEEE 802.11i/D3.0
|
||
# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
|
||
# If not set, this defaults to: WPA RSN
|
||
#
|
||
# key_mgmt: list of accepted authenticated key management protocols
|
||
# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
|
||
# WPA-EAP = WPA using EAP authentication
|
||
# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
|
||
# generated WEP keys
|
||
# NONE = WPA is not used; plaintext or static WEP could be used
|
||
# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
|
||
# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
|
||
# If not set, this defaults to: WPA-PSK WPA-EAP
|
||
#
|
||
# ieee80211w: whether management frame protection is enabled
|
||
# 0 = disabled (default unless changed with the global pmf parameter)
|
||
# 1 = optional
|
||
# 2 = required
|
||
# The most common configuration options for this based on the PMF (protected
|
||
# management frames) certification program are:
|
||
# PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256
|
||
# PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256
|
||
# (and similarly for WPA-PSK and WPA-WPSK-SHA256 if WPA2-Personal is used)
|
||
#
|
||
# auth_alg: list of allowed IEEE 802.11 authentication algorithms
|
||
# OPEN = Open System authentication (required for WPA/WPA2)
|
||
# SHARED = Shared Key authentication (requires static WEP keys)
|
||
# LEAP = LEAP/Network EAP (only used with LEAP)
|
||
# If not set, automatic selection is used (Open System with LEAP enabled if
|
||
# LEAP is allowed as one of the EAP methods).
|
||
#
|
||
# pairwise: list of accepted pairwise (unicast) ciphers for WPA
|
||
# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
|
||
# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
|
||
# NONE = Use only Group Keys (deprecated, should not be included if APs support
|
||
# pairwise keys)
|
||
# If not set, this defaults to: CCMP TKIP
|
||
#
|
||
# group: list of accepted group (broadcast/multicast) ciphers for WPA
|
||
# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
|
||
# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
|
||
# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
|
||
# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
|
||
# If not set, this defaults to: CCMP TKIP WEP104 WEP40
|
||
#
|
||
# psk: WPA preshared key; 256-bit pre-shared key
|
||
# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
|
||
# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
|
||
# generated using the passphrase and SSID). ASCII passphrase must be between
|
||
# 8 and 63 characters (inclusive). ext:<name of external PSK field> format can
|
||
# be used to indicate that the PSK/passphrase is stored in external storage.
|
||
# This field is not needed, if WPA-EAP is used.
|
||
# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
|
||
# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
|
||
# startup and reconfiguration time can be optimized by generating the PSK only
|
||
# only when the passphrase or SSID has actually changed.
|
||
#
|
||
# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
|
||
# Dynamic WEP key required for non-WPA mode
|
||
# bit0 (1): require dynamically generated unicast WEP key
|
||
# bit1 (2): require dynamically generated broadcast WEP key
|
||
# (3 = require both keys; default)
|
||
# Note: When using wired authentication, eapol_flags must be set to 0 for the
|
||
# authentication to be completed successfully.
|
||
#
|
||
# mixed_cell: This option can be used to configure whether so called mixed
|
||
# cells, i.e., networks that use both plaintext and encryption in the same
|
||
# SSID, are allowed when selecting a BSS from scan results.
|
||
# 0 = disabled (default)
|
||
# 1 = enabled
|
||
#
|
||
# proactive_key_caching:
|
||
# Enable/disable opportunistic PMKSA caching for WPA2.
|
||
# 0 = disabled (default unless changed with the global okc parameter)
|
||
# 1 = enabled
|
||
#
|
||
# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
|
||
# hex without quotation, e.g., 0102030405)
|
||
# wep_tx_keyidx: Default WEP key index (TX) (0..3)
|
||
#
|
||
# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
|
||
# allowed. This is only used with RSN/WPA2.
|
||
# 0 = disabled (default)
|
||
# 1 = enabled
|
||
#peerkey=1
|
||
#
|
||
# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
|
||
# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
|
||
#
|
||
# Following fields are only used with internal EAP implementation.
|
||
# eap: space-separated list of accepted EAP methods
|
||
# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
|
||
# cannot be used with WPA; to be used as a Phase 2 method
|
||
# with EAP-PEAP or EAP-TTLS)
|
||
# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
|
||
# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
|
||
# OTP = EAP-OTP (cannot be used separately with WPA; to be used
|
||
# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
|
||
# GTC = EAP-GTC (cannot be used separately with WPA; to be used
|
||
# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
|
||
# TLS = EAP-TLS (client and server certificate)
|
||
# PEAP = EAP-PEAP (with tunnelled EAP authentication)
|
||
# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
|
||
# authentication)
|
||
# If not set, all compiled in methods are allowed.
|
||
#
|
||
# identity: Identity string for EAP
|
||
# This field is also used to configure user NAI for
|
||
# EAP-PSK/PAX/SAKE/GPSK.
|
||
# anonymous_identity: Anonymous identity string for EAP (to be used as the
|
||
# unencrypted identity with EAP types that support different tunnelled
|
||
# identity, e.g., EAP-TTLS). This field can also be used with
|
||
# EAP-SIM/AKA/AKA' to store the pseudonym identity.
|
||
# password: Password string for EAP. This field can include either the
|
||
# plaintext password (using ASCII or hex string) or a NtPasswordHash
|
||
# (16-byte MD4 hash of password) in hash:<32 hex digits> format.
|
||
# NtPasswordHash can only be used when the password is for MSCHAPv2 or
|
||
# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
|
||
# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
|
||
# PSK) is also configured using this field. For EAP-GPSK, this is a
|
||
# variable length PSK. ext:<name of external password field> format can
|
||
# be used to indicate that the password is stored in external storage.
|
||
# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
|
||
# or more trusted CA certificates. If ca_cert and ca_path are not
|
||
# included, server certificate will not be verified. This is insecure and
|
||
# a trusted CA certificate should always be configured when using
|
||
# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
|
||
# change when wpa_supplicant is run in the background.
|
||
#
|
||
# Alternatively, this can be used to only perform matching of the server
|
||
# certificate (SHA-256 hash of the DER encoded X.509 certificate). In
|
||
# this case, the possible CA certificates in the server certificate chain
|
||
# are ignored and only the server certificate is verified. This is
|
||
# configured with the following format:
|
||
# hash:://server/sha256/cert_hash_in_hex
|
||
# For example: "hash://server/sha256/
|
||
# 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"
|
||
#
|
||
# On Windows, trusted CA certificates can be loaded from the system
|
||
# certificate store by setting this to cert_store://<name>, e.g.,
|
||
# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
|
||
# Note that when running wpa_supplicant as an application, the user
|
||
# certificate store (My user account) is used, whereas computer store
|
||
# (Computer account) is used when running wpasvc as a service.
|
||
# ca_path: Directory path for CA certificate files (PEM). This path may
|
||
# contain multiple CA certificates in OpenSSL format. Common use for this
|
||
# is to point to system trusted CA list which is often installed into
|
||
# directory like /etc/ssl/certs. If configured, these certificates are
|
||
# added to the list of trusted CAs. ca_cert may also be included in that
|
||
# case, but it is not required.
|
||
# client_cert: File path to client certificate file (PEM/DER)
|
||
# Full path should be used since working directory may change when
|
||
# wpa_supplicant is run in the background.
|
||
# Alternatively, a named configuration blob can be used by setting this
|
||
# to blob://<blob name>.
|
||
# private_key: File path to client private key file (PEM/DER/PFX)
|
||
# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
|
||
# commented out. Both the private key and certificate will be read from
|
||
# the PKCS#12 file in this case. Full path should be used since working
|
||
# directory may change when wpa_supplicant is run in the background.
|
||
# Windows certificate store can be used by leaving client_cert out and
|
||
# configuring private_key in one of the following formats:
|
||
# cert://substring_to_match
|
||
# hash://certificate_thumbprint_in_hex
|
||
# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
|
||
# Note that when running wpa_supplicant as an application, the user
|
||
# certificate store (My user account) is used, whereas computer store
|
||
# (Computer account) is used when running wpasvc as a service.
|
||
# Alternatively, a named configuration blob can be used by setting this
|
||
# to blob://<blob name>.
|
||
# private_key_passwd: Password for private key file (if left out, this will be
|
||
# asked through control interface)
|
||
# dh_file: File path to DH/DSA parameters file (in PEM format)
|
||
# This is an optional configuration file for setting parameters for an
|
||
# ephemeral DH key exchange. In most cases, the default RSA
|
||
# authentication does not use this configuration. However, it is possible
|
||
# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
|
||
# DSA keys always use ephemeral DH keys. This can be used to achieve
|
||
# forward secrecy. If the file is in DSA parameters format, it will be
|
||
# automatically converted into DH params.
|
||
# subject_match: Substring to be matched against the subject of the
|
||
# authentication server certificate. If this string is set, the server
|
||
# sertificate is only accepted if it contains this string in the subject.
|
||
# The subject string is in following format:
|
||
# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
|
||
# altsubject_match: Semicolon separated string of entries to be matched against
|
||
# the alternative subject name of the authentication server certificate.
|
||
# If this string is set, the server sertificate is only accepted if it
|
||
# contains one of the entries in an alternative subject name extension.
|
||
# altSubjectName string is in following format: TYPE:VALUE
|
||
# Example: EMAIL:server@example.com
|
||
# Example: DNS:server.example.com;DNS:server2.example.com
|
||
# Following types are supported: EMAIL, DNS, URI
|
||
# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
|
||
# (string with field-value pairs, e.g., "peapver=0" or
|
||
# "peapver=1 peaplabel=1")
|
||
# 'peapver' can be used to force which PEAP version (0 or 1) is used.
|
||
# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
|
||
# to be used during key derivation when PEAPv1 or newer. Most existing
|
||
# PEAPv1 implementation seem to be using the old label, "client EAP
|
||
# encryption", and wpa_supplicant is now using that as the default value.
|
||
# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
|
||
# interoperate with PEAPv1; see eap_testing.txt for more details.
|
||
# 'peap_outer_success=0' can be used to terminate PEAP authentication on
|
||
# tunneled EAP-Success. This is required with some RADIUS servers that
|
||
# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
|
||
# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
|
||
# include_tls_length=1 can be used to force wpa_supplicant to include
|
||
# TLS Message Length field in all TLS messages even if they are not
|
||
# fragmented.
|
||
# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
|
||
# challenges (by default, it accepts 2 or 3)
|
||
# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
|
||
# protected result indication.
|
||
# 'crypto_binding' option can be used to control PEAPv0 cryptobinding
|
||
# behavior:
|
||
# * 0 = do not use cryptobinding (default)
|
||
# * 1 = use cryptobinding if server supports it
|
||
# * 2 = require cryptobinding
|
||
# EAP-WSC (WPS) uses following options: pin=<Device Password> or
|
||
# pbc=1.
|
||
# phase2: Phase2 (inner authentication with TLS tunnel) parameters
|
||
# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
|
||
# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
|
||
#
|
||
# TLS-based methods can use the following parameters to control TLS behavior
|
||
# (these are normally in the phase1 parameter, but can be used also in the
|
||
# phase2 parameter when EAP-TLS is used within the inner tunnel):
|
||
# tls_allow_md5=1 - allow MD5-based certificate signatures (depending on the
|
||
# TLS library, these may be disabled by default to enforce stronger
|
||
# security)
|
||
# tls_disable_time_checks=1 - ignore certificate validity time (this requests
|
||
# the TLS library to accept certificates even if they are not currently
|
||
# valid, i.e., have expired or have not yet become valid; this should be
|
||
# used only for testing purposes)
|
||
# tls_disable_session_ticket=1 - disable TLS Session Ticket extension
|
||
# tls_disable_session_ticket=0 - allow TLS Session Ticket extension to be used
|
||
# Note: If not set, this is automatically set to 1 for EAP-TLS/PEAP/TTLS
|
||
# as a workaround for broken authentication server implementations unless
|
||
# EAP workarounds are disabled with eap_workarounds=0.
|
||
# For EAP-FAST, this must be set to 0 (or left unconfigured for the
|
||
# default value to be used automatically).
|
||
#
|
||
# Following certificate/private key fields are used in inner Phase2
|
||
# authentication when using EAP-TTLS or EAP-PEAP.
|
||
# ca_cert2: File path to CA certificate file. This file can have one or more
|
||
# trusted CA certificates. If ca_cert2 and ca_path2 are not included,
|
||
# server certificate will not be verified. This is insecure and a trusted
|
||
# CA certificate should always be configured.
|
||
# ca_path2: Directory path for CA certificate files (PEM)
|
||
# client_cert2: File path to client certificate file
|
||
# private_key2: File path to client private key file
|
||
# private_key2_passwd: Password for private key file
|
||
# dh_file2: File path to DH/DSA parameters file (in PEM format)
|
||
# subject_match2: Substring to be matched against the subject of the
|
||
# authentication server certificate.
|
||
# altsubject_match2: Substring to be matched against the alternative subject
|
||
# name of the authentication server certificate.
|
||
#
|
||
# fragment_size: Maximum EAP fragment size in bytes (default 1398).
|
||
# This value limits the fragment size for EAP methods that support
|
||
# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
|
||
# small enough to make the EAP messages fit in MTU of the network
|
||
# interface used for EAPOL. The default value is suitable for most
|
||
# cases.
|
||
#
|
||
# ocsp: Whether to use/require OCSP to check server certificate
|
||
# 0 = do not use OCSP stapling (TLS certificate status extension)
|
||
# 1 = try to use OCSP stapling, but not require response
|
||
# 2 = require valid OCSP stapling response
|
||
#
|
||
# EAP-FAST variables:
|
||
# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
|
||
# to create this file and write updates to it when PAC is being
|
||
# provisioned or refreshed. Full path to the file should be used since
|
||
# working directory may change when wpa_supplicant is run in the
|
||
# background. Alternatively, a named configuration blob can be used by
|
||
# setting this to blob://<blob name>
|
||
# phase1: fast_provisioning option can be used to enable in-line provisioning
|
||
# of EAP-FAST credentials (PAC):
|
||
# 0 = disabled,
|
||
# 1 = allow unauthenticated provisioning,
|
||
# 2 = allow authenticated provisioning,
|
||
# 3 = allow both unauthenticated and authenticated provisioning
|
||
# fast_max_pac_list_len=<num> option can be used to set the maximum
|
||
# number of PAC entries to store in a PAC list (default: 10)
|
||
# fast_pac_format=binary option can be used to select binary format for
|
||
# storing PAC entries in order to save some space (the default
|
||
# text format uses about 2.5 times the size of minimal binary
|
||
# format)
|
||
#
|
||
# wpa_supplicant supports number of "EAP workarounds" to work around
|
||
# interoperability issues with incorrectly behaving authentication servers.
|
||
# These are enabled by default because some of the issues are present in large
|
||
# number of authentication servers. Strict EAP conformance mode can be
|
||
# configured by disabling workarounds with eap_workaround=0.
|
||
|
||
# Station inactivity limit
|
||
#
|
||
# If a station does not send anything in ap_max_inactivity seconds, an
|
||
# empty data frame is sent to it in order to verify whether it is
|
||
# still in range. If this frame is not ACKed, the station will be
|
||
# disassociated and then deauthenticated. This feature is used to
|
||
# clear station table of old entries when the STAs move out of the
|
||
# range.
|
||
#
|
||
# The station can associate again with the AP if it is still in range;
|
||
# this inactivity poll is just used as a nicer way of verifying
|
||
# inactivity; i.e., client will not report broken connection because
|
||
# disassociation frame is not sent immediately without first polling
|
||
# the STA with a data frame.
|
||
# default: 300 (i.e., 5 minutes)
|
||
#ap_max_inactivity=300
|
||
|
||
# DTIM period in Beacon intervals for AP mode (default: 2)
|
||
#dtim_period=2
|
||
|
||
# Beacon interval (default: 100 TU)
|
||
#beacon_int=100
|
||
|
||
# disable_ht: Whether HT (802.11n) should be disabled.
|
||
# 0 = HT enabled (if AP supports it)
|
||
# 1 = HT disabled
|
||
#
|
||
# disable_ht40: Whether HT-40 (802.11n) should be disabled.
|
||
# 0 = HT-40 enabled (if AP supports it)
|
||
# 1 = HT-40 disabled
|
||
#
|
||
# disable_sgi: Whether SGI (short guard interval) should be disabled.
|
||
# 0 = SGI enabled (if AP supports it)
|
||
# 1 = SGI disabled
|
||
#
|
||
# ht_mcs: Configure allowed MCS rates.
|
||
# Parsed as an array of bytes, in base-16 (ascii-hex)
|
||
# ht_mcs="" // Use all available (default)
|
||
# ht_mcs="0xff 00 00 00 00 00 00 00 00 00 " // Use MCS 0-7 only
|
||
# ht_mcs="0xff ff 00 00 00 00 00 00 00 00 " // Use MCS 0-15 only
|
||
#
|
||
# disable_max_amsdu: Whether MAX_AMSDU should be disabled.
|
||
# -1 = Do not make any changes.
|
||
# 0 = Enable MAX-AMSDU if hardware supports it.
|
||
# 1 = Disable AMSDU
|
||
#
|
||
# ampdu_density: Allow overriding AMPDU density configuration.
|
||
# Treated as hint by the kernel.
|
||
# -1 = Do not make any changes.
|
||
# 0-3 = Set AMPDU density (aka factor) to specified value.
|
||
|
||
# disable_vht: Whether VHT should be disabled.
|
||
# 0 = VHT enabled (if AP supports it)
|
||
# 1 = VHT disabled
|
||
#
|
||
# vht_capa: VHT capabilities to set in the override
|
||
# vht_capa_mask: mask of VHT capabilities
|
||
#
|
||
# vht_rx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for RX NSS 1-8
|
||
# vht_tx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for TX NSS 1-8
|
||
# 0: MCS 0-7
|
||
# 1: MCS 0-8
|
||
# 2: MCS 0-9
|
||
# 3: not supported
|
||
|
||
# Example blocks:
|
||
|
||
# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
|
||
network={
|
||
ssid="simple"
|
||
psk="very secret passphrase"
|
||
priority=5
|
||
}
|
||
|
||
# Same as previous, but request SSID-specific scanning (for APs that reject
|
||
# broadcast SSID)
|
||
network={
|
||
ssid="second ssid"
|
||
scan_ssid=1
|
||
psk="very secret passphrase"
|
||
priority=2
|
||
}
|
||
|
||
# Only WPA-PSK is used. Any valid cipher combination is accepted.
|
||
network={
|
||
ssid="example"
|
||
proto=WPA
|
||
key_mgmt=WPA-PSK
|
||
pairwise=CCMP TKIP
|
||
group=CCMP TKIP WEP104 WEP40
|
||
psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
|
||
priority=2
|
||
}
|
||
|
||
# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
|
||
network={
|
||
ssid="example"
|
||
proto=WPA
|
||
key_mgmt=WPA-PSK
|
||
pairwise=TKIP
|
||
group=TKIP
|
||
psk="not so secure passphrase"
|
||
wpa_ptk_rekey=600
|
||
}
|
||
|
||
# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
|
||
# or WEP40 as the group cipher will not be accepted.
|
||
network={
|
||
ssid="example"
|
||
proto=RSN
|
||
key_mgmt=WPA-EAP
|
||
pairwise=CCMP TKIP
|
||
group=CCMP TKIP
|
||
eap=TLS
|
||
identity="user@example.com"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
client_cert="/etc/cert/user.pem"
|
||
private_key="/etc/cert/user.prv"
|
||
private_key_passwd="password"
|
||
priority=1
|
||
}
|
||
|
||
# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
|
||
# (e.g., Radiator)
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=PEAP
|
||
identity="user@example.com"
|
||
password="foobar"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
phase1="peaplabel=1"
|
||
phase2="auth=MSCHAPV2"
|
||
priority=10
|
||
}
|
||
|
||
# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
|
||
# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=TTLS
|
||
identity="user@example.com"
|
||
anonymous_identity="anonymous@example.com"
|
||
password="foobar"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
priority=2
|
||
}
|
||
|
||
# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
|
||
# use. Real identity is sent only within an encrypted TLS tunnel.
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=TTLS
|
||
identity="user@example.com"
|
||
anonymous_identity="anonymous@example.com"
|
||
password="foobar"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
phase2="auth=MSCHAPV2"
|
||
}
|
||
|
||
# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
|
||
# authentication.
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=TTLS
|
||
# Phase1 / outer authentication
|
||
anonymous_identity="anonymous@example.com"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
# Phase 2 / inner authentication
|
||
phase2="autheap=TLS"
|
||
ca_cert2="/etc/cert/ca2.pem"
|
||
client_cert2="/etc/cer/user.pem"
|
||
private_key2="/etc/cer/user.prv"
|
||
private_key2_passwd="password"
|
||
priority=2
|
||
}
|
||
|
||
# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
|
||
# group cipher.
|
||
network={
|
||
ssid="example"
|
||
bssid=00:11:22:33:44:55
|
||
proto=WPA RSN
|
||
key_mgmt=WPA-PSK WPA-EAP
|
||
pairwise=CCMP
|
||
group=CCMP
|
||
psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
|
||
}
|
||
|
||
# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
|
||
# and all valid ciphers.
|
||
network={
|
||
ssid=00010203
|
||
psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
|
||
}
|
||
|
||
|
||
# EAP-SIM with a GSM SIM or USIM
|
||
network={
|
||
ssid="eap-sim-test"
|
||
key_mgmt=WPA-EAP
|
||
eap=SIM
|
||
pin="1234"
|
||
pcsc=""
|
||
}
|
||
|
||
|
||
# EAP-PSK
|
||
network={
|
||
ssid="eap-psk-test"
|
||
key_mgmt=WPA-EAP
|
||
eap=PSK
|
||
anonymous_identity="eap_psk_user"
|
||
password=06b4be19da289f475aa46a33cb793029
|
||
identity="eap_psk_user@example.com"
|
||
}
|
||
|
||
|
||
# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
|
||
# EAP-TLS for authentication and key generation; require both unicast and
|
||
# broadcast WEP keys.
|
||
network={
|
||
ssid="1x-test"
|
||
key_mgmt=IEEE8021X
|
||
eap=TLS
|
||
identity="user@example.com"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
client_cert="/etc/cert/user.pem"
|
||
private_key="/etc/cert/user.prv"
|
||
private_key_passwd="password"
|
||
eapol_flags=3
|
||
}
|
||
|
||
|
||
# LEAP with dynamic WEP keys
|
||
network={
|
||
ssid="leap-example"
|
||
key_mgmt=IEEE8021X
|
||
eap=LEAP
|
||
identity="user"
|
||
password="foobar"
|
||
}
|
||
|
||
# EAP-IKEv2 using shared secrets for both server and peer authentication
|
||
network={
|
||
ssid="ikev2-example"
|
||
key_mgmt=WPA-EAP
|
||
eap=IKEV2
|
||
identity="user"
|
||
password="foobar"
|
||
}
|
||
|
||
# EAP-FAST with WPA (WPA or WPA2)
|
||
network={
|
||
ssid="eap-fast-test"
|
||
key_mgmt=WPA-EAP
|
||
eap=FAST
|
||
anonymous_identity="FAST-000102030405"
|
||
identity="username"
|
||
password="password"
|
||
phase1="fast_provisioning=1"
|
||
pac_file="/etc/wpa_supplicant.eap-fast-pac"
|
||
}
|
||
|
||
network={
|
||
ssid="eap-fast-test"
|
||
key_mgmt=WPA-EAP
|
||
eap=FAST
|
||
anonymous_identity="FAST-000102030405"
|
||
identity="username"
|
||
password="password"
|
||
phase1="fast_provisioning=1"
|
||
pac_file="blob://eap-fast-pac"
|
||
}
|
||
|
||
# Plaintext connection (no WPA, no IEEE 802.1X)
|
||
network={
|
||
ssid="plaintext-test"
|
||
key_mgmt=NONE
|
||
}
|
||
|
||
|
||
# Shared WEP key connection (no WPA, no IEEE 802.1X)
|
||
network={
|
||
ssid="static-wep-test"
|
||
key_mgmt=NONE
|
||
wep_key0="abcde"
|
||
wep_key1=0102030405
|
||
wep_key2="1234567890123"
|
||
wep_tx_keyidx=0
|
||
priority=5
|
||
}
|
||
|
||
|
||
# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
|
||
# IEEE 802.11 authentication
|
||
network={
|
||
ssid="static-wep-test2"
|
||
key_mgmt=NONE
|
||
wep_key0="abcde"
|
||
wep_key1=0102030405
|
||
wep_key2="1234567890123"
|
||
wep_tx_keyidx=0
|
||
priority=5
|
||
auth_alg=SHARED
|
||
}
|
||
|
||
|
||
# IBSS/ad-hoc network with WPA-None/TKIP.
|
||
network={
|
||
ssid="test adhoc"
|
||
mode=1
|
||
frequency=2412
|
||
proto=WPA
|
||
key_mgmt=WPA-NONE
|
||
pairwise=NONE
|
||
group=TKIP
|
||
psk="secret passphrase"
|
||
}
|
||
|
||
|
||
# Catch all example that allows more or less all configuration modes
|
||
network={
|
||
ssid="example"
|
||
scan_ssid=1
|
||
key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
|
||
pairwise=CCMP TKIP
|
||
group=CCMP TKIP WEP104 WEP40
|
||
psk="very secret passphrase"
|
||
eap=TTLS PEAP TLS
|
||
identity="user@example.com"
|
||
password="foobar"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
client_cert="/etc/cert/user.pem"
|
||
private_key="/etc/cert/user.prv"
|
||
private_key_passwd="password"
|
||
phase1="peaplabel=0"
|
||
}
|
||
|
||
# Example of EAP-TLS with smartcard (openssl engine)
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=TLS
|
||
proto=RSN
|
||
pairwise=CCMP TKIP
|
||
group=CCMP TKIP
|
||
identity="user@example.com"
|
||
ca_cert="/etc/cert/ca.pem"
|
||
client_cert="/etc/cert/user.pem"
|
||
|
||
engine=1
|
||
|
||
# The engine configured here must be available. Look at
|
||
# OpenSSL engine support in the global section.
|
||
# The key available through the engine must be the private key
|
||
# matching the client certificate configured above.
|
||
|
||
# use the opensc engine
|
||
#engine_id="opensc"
|
||
#key_id="45"
|
||
|
||
# use the pkcs11 engine
|
||
engine_id="pkcs11"
|
||
key_id="id_45"
|
||
|
||
# Optional PIN configuration; this can be left out and PIN will be
|
||
# asked through the control interface
|
||
pin="1234"
|
||
}
|
||
|
||
# Example configuration showing how to use an inlined blob as a CA certificate
|
||
# data instead of using external file
|
||
network={
|
||
ssid="example"
|
||
key_mgmt=WPA-EAP
|
||
eap=TTLS
|
||
identity="user@example.com"
|
||
anonymous_identity="anonymous@example.com"
|
||
password="foobar"
|
||
ca_cert="blob://exampleblob"
|
||
priority=20
|
||
}
|
||
|
||
blob-base64-exampleblob={
|
||
SGVsbG8gV29ybGQhCg==
|
||
}
|
||
|
||
|
||
# Wildcard match for SSID (plaintext APs only). This example select any
|
||
# open AP regardless of its SSID.
|
||
network={
|
||
key_mgmt=NONE
|
||
}
|
||
|
||
|
||
# Example config file that will only scan on channel 36.
|
||
freq_list=5180
|
||
network={
|
||
key_mgmt=NONE
|
||
}
|