b586054f95
The Linux kernel commit 113f3aaa81bd ("cfg80211: Prevent regulatory
restore during STA disconnect in concurrent interfaces") broke the
regulatory clearing attempt in many test cases since
cfg80211_is_all_idle() is now returning false due to the AP interface
being up and that results in the Country IE -based regulatory
information not getting cleared back to defaults.
Work around this by stopping the AP interface first so that when the
station interface receives the disconnection, there are no other active
interfaces in the system. In addition, wait for REGDOM event for the
Country IE hint after association to avoid disconnection before the
regulatory events have been fully processed.
Signed-off-by: Jouni Malinen <j@w1.fi>
1127 lines
44 KiB
Python
1127 lines
44 KiB
Python
# Test cases for VHT operations with hostapd
|
|
# Copyright (c) 2014, Qualcomm Atheros, Inc.
|
|
# Copyright (c) 2013, Intel Corporation
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import os
|
|
import subprocess, time
|
|
|
|
import hwsim_utils
|
|
import hostapd
|
|
from utils import HwsimSkip
|
|
from test_dfs import wait_dfs_event
|
|
from test_ap_csa import csa_supported
|
|
from test_ap_ht import clear_scan_cache
|
|
|
|
def vht_supported():
|
|
cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
|
|
reg = cmd.stdout.read()
|
|
if "@ 80)" in reg or "@ 160)" in reg:
|
|
return True
|
|
return False
|
|
|
|
def test_ap_vht80(dev, apdev):
|
|
"""VHT with 80 MHz channel width"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=5180" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=80 MHz" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
est = dev[0].get_bss(bssid)['est_throughput']
|
|
if est != "390001":
|
|
raise Exception("Unexpected BSS est_throughput: " + est)
|
|
status = dev[0].get_status()
|
|
if status["ieee80211ac"] != "1":
|
|
raise Exception("Unexpected STATUS ieee80211ac value (STA)")
|
|
status = hapd.get_status()
|
|
logger.info("hostapd STATUS: " + str(status))
|
|
if status["ieee80211n"] != "1":
|
|
raise Exception("Unexpected STATUS ieee80211n value")
|
|
if status["ieee80211ac"] != "1":
|
|
raise Exception("Unexpected STATUS ieee80211ac value")
|
|
if status["secondary_channel"] != "1":
|
|
raise Exception("Unexpected STATUS secondary_channel value")
|
|
if status["vht_oper_chwidth"] != "1":
|
|
raise Exception("Unexpected STATUS vht_oper_chwidth value")
|
|
if status["vht_oper_centr_freq_seg0_idx"] != "42":
|
|
raise Exception("Unexpected STATUS vht_oper_centr_freq_seg0_idx value")
|
|
if "vht_caps_info" not in status:
|
|
raise Exception("Missing vht_caps_info")
|
|
|
|
sta = hapd.get_sta(dev[0].own_addr())
|
|
logger.info("hostapd STA: " + str(sta))
|
|
if "[HT]" not in sta['flags']:
|
|
raise Exception("Missing STA flag: HT")
|
|
if "[VHT]" not in sta['flags']:
|
|
raise Exception("Missing STA flag: VHT")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
|
|
def vht80_test(apdev, dev, channel, ht_capab):
|
|
clear_scan_cache(apdev)
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": str(channel),
|
|
"ht_capab": ht_capab,
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42" }
|
|
hapd = hostapd.add_ap(apdev, params)
|
|
bssid = apdev['bssid']
|
|
|
|
dev.connect("vht", key_mgmt="NONE", scan_freq=str(5000 + 5 * channel))
|
|
hwsim_utils.test_connectivity(dev, hapd)
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev.request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev.flush_scan_cache()
|
|
|
|
def test_ap_vht80b(dev, apdev):
|
|
"""VHT with 80 MHz channel width (HT40- channel 40)"""
|
|
vht80_test(apdev[0], dev[0], 40, "[HT40-]")
|
|
|
|
def test_ap_vht80c(dev, apdev):
|
|
"""VHT with 80 MHz channel width (HT40+ channel 44)"""
|
|
vht80_test(apdev[0], dev[0], 44, "[HT40+]")
|
|
|
|
def test_ap_vht80d(dev, apdev):
|
|
"""VHT with 80 MHz channel width (HT40- channel 48)"""
|
|
vht80_test(apdev[0], dev[0], 48, "[HT40-]")
|
|
|
|
def test_ap_vht80_params(dev, apdev):
|
|
"""VHT with 80 MHz channel width and number of optional features enabled"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_capab": "[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP0]",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"require_vht": "1" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5180",
|
|
disable_vht="1", wait_connect=False)
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
|
|
ev = dev[1].wait_event(["CTRL-EVENT-ASSOC-REJECT"])
|
|
if ev is None:
|
|
raise Exception("Association rejection timed out")
|
|
if "status_code=104" not in ev:
|
|
raise Exception("Unexpected rejection status code")
|
|
dev[1].request("DISCONNECT")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
def test_ap_vht80_invalid(dev, apdev):
|
|
"""VHT with invalid 80 MHz channel configuration (seg1)"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"vht_oper_centr_freq_seg1_idx": "155",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
# This fails due to unexpected seg1 configuration
|
|
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("AP-DISABLED not reported")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
|
|
def test_ap_vht80_invalid2(dev, apdev):
|
|
"""VHT with invalid 80 MHz channel configuration (seg0)"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "46",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
# This fails due to invalid seg0 configuration
|
|
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("AP-DISABLED not reported")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
|
|
def test_ap_vht_20(devs, apdevs):
|
|
"""VHT and 20 MHz channel"""
|
|
dev = devs[0]
|
|
ap = apdevs[0]
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "test-vht20",
|
|
"country_code": "DE",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"ht_capab": "",
|
|
"vht_capab": "",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "0",
|
|
"supported_rates": "60 120 240 360 480 540",
|
|
"require_vht": "1",
|
|
}
|
|
hapd = hostapd.add_ap(ap, params)
|
|
dev.connect("test-vht20", scan_freq="5180", key_mgmt="NONE")
|
|
hwsim_utils.test_connectivity(dev, hapd)
|
|
finally:
|
|
dev.request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev.flush_scan_cache()
|
|
|
|
def test_ap_vht_40(devs, apdevs):
|
|
"""VHT and 40 MHz channel"""
|
|
dev = devs[0]
|
|
ap = apdevs[0]
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "test-vht40",
|
|
"country_code": "DE",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"ht_capab": "[HT40+]",
|
|
"vht_capab": "",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "0",
|
|
}
|
|
hapd = hostapd.add_ap(ap, params)
|
|
dev.connect("test-vht40", scan_freq="5180", key_mgmt="NONE")
|
|
hwsim_utils.test_connectivity(dev, hapd)
|
|
finally:
|
|
dev.request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev.flush_scan_cache()
|
|
|
|
def test_ap_vht_capab_not_supported(dev, apdev):
|
|
"""VHT configuration with driver not supporting all vht_capab entries"""
|
|
try:
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_capab": "[MAX-MPDU-7991][MAX-MPDU-11454][VHT160][VHT160-80PLUS80][RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-STBC-1][RX-STBC-12][RX-STBC-123][RX-STBC-1234][SU-BEAMFORMER][SU-BEAMFORMEE][BF-ANTENNA-2][BF-ANTENNA-3][BF-ANTENNA-4][SOUNDING-DIMENSION-2][SOUNDING-DIMENSION-3][SOUNDING-DIMENSION-4][MU-BEAMFORMER][VHT-TXOP-PS][HTC-VHT][MAX-A-MPDU-LEN-EXP0][MAX-A-MPDU-LEN-EXP7][VHT-LINK-ADAPT2][VHT-LINK-ADAPT3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"require_vht": "1" }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Startup failure not reported")
|
|
for i in range(1, 7):
|
|
if "OK" not in hapd.request("SET vht_capab [MAX-A-MPDU-LEN-EXP%d]" % i):
|
|
raise Exception("Unexpected SET failure")
|
|
finally:
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
|
|
def test_ap_vht160(dev, apdev):
|
|
"""VHT with 160 MHz channel width (1)"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "2",
|
|
"vht_oper_centr_freq_seg0_idx": "50",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
|
|
ev = wait_dfs_event(hapd, "DFS-CAC-START", 5)
|
|
if "DFS-CAC-START" not in ev:
|
|
raise Exception("Unexpected DFS event")
|
|
|
|
state = hapd.get_status_field("state")
|
|
if state != "DFS":
|
|
if state == "DISABLED" and not os.path.exists("dfs"):
|
|
# Not all systems have recent enough CRDA version and
|
|
# wireless-regdb changes to support 160 MHz and DFS. For now,
|
|
# do not report failures for this test case.
|
|
raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz")
|
|
raise Exception("Unexpected interface state: " + state)
|
|
|
|
logger.info("Waiting for CAC to complete")
|
|
|
|
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
|
|
if "success=1" not in ev:
|
|
raise Exception("CAC failed")
|
|
if "freq=5180" not in ev:
|
|
raise Exception("Unexpected DFS freq result")
|
|
|
|
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
|
|
if not ev:
|
|
raise Exception("AP setup timed out")
|
|
|
|
state = hapd.get_status_field("state")
|
|
if state != "ENABLED":
|
|
raise Exception("Unexpected interface state")
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
|
|
dev[0].wait_regdom(country_ie=True)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=5180" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=160 MHz" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].request("ABORT_SCAN")
|
|
dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht160b(dev, apdev):
|
|
"""VHT with 160 MHz channel width (2)"""
|
|
try:
|
|
hapd = None
|
|
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "104",
|
|
"ht_capab": "[HT40-]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "2",
|
|
"vht_oper_centr_freq_seg0_idx": "114",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[1], params, wait_enabled=False)
|
|
|
|
ev = wait_dfs_event(hapd, "DFS-CAC-START", 5)
|
|
if "DFS-CAC-START" not in ev:
|
|
raise Exception("Unexpected DFS event(2)")
|
|
|
|
state = hapd.get_status_field("state")
|
|
if state != "DFS":
|
|
if state == "DISABLED" and not os.path.exists("dfs"):
|
|
# Not all systems have recent enough CRDA version and
|
|
# wireless-regdb changes to support 160 MHz and DFS. For now,
|
|
# do not report failures for this test case.
|
|
raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz")
|
|
raise Exception("Unexpected interface state: " + state)
|
|
|
|
logger.info("Waiting for CAC to complete")
|
|
|
|
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
|
|
if "success=1" not in ev:
|
|
raise Exception("CAC failed(2)")
|
|
if "freq=5520" not in ev:
|
|
raise Exception("Unexpected DFS freq result(2)")
|
|
|
|
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
|
|
if not ev:
|
|
raise Exception("AP setup timed out(2)")
|
|
|
|
state = hapd.get_status_field("state")
|
|
if state != "ENABLED":
|
|
raise Exception("Unexpected interface state(2)")
|
|
|
|
freq = hapd.get_status_field("freq")
|
|
if freq != "5520":
|
|
raise Exception("Unexpected frequency(2)")
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5520")
|
|
dev[0].wait_regdom(country_ie=True)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=5520" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=160 MHz" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].request("ABORT_SCAN")
|
|
dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht160_no_dfs_100_plus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (100 plus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "100", "[HT40+]")
|
|
|
|
def test_ap_vht160_no_dfs(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (104 minus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "104", "[HT40-]")
|
|
|
|
def test_ap_vht160_no_dfs_108_plus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (108 plus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "108", "[HT40+]")
|
|
|
|
def test_ap_vht160_no_dfs_112_minus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (112 minus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "112", "[HT40-]")
|
|
|
|
def test_ap_vht160_no_dfs_116_plus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (116 plus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "116", "[HT40+]")
|
|
|
|
def test_ap_vht160_no_dfs_120_minus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (120 minus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "120", "[HT40-]")
|
|
|
|
def test_ap_vht160_no_dfs_124_plus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (124 plus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "124", "[HT40+]")
|
|
|
|
def test_ap_vht160_no_dfs_128_minus(dev, apdev):
|
|
"""VHT with 160 MHz channel width and no DFS (128 minus)"""
|
|
run_ap_vht160_no_dfs(dev, apdev, "128", "[HT40-]")
|
|
|
|
def run_ap_vht160_no_dfs(dev, apdev, channel, ht_capab):
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "ZA",
|
|
"hw_mode": "a",
|
|
"channel": channel,
|
|
"ht_capab": ht_capab,
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "2",
|
|
"vht_oper_centr_freq_seg0_idx": "114",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
ev = hapd.wait_event(["AP-ENABLED"], timeout=2)
|
|
if not ev:
|
|
cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
|
|
reg = cmd.stdout.readlines()
|
|
for r in reg:
|
|
if "5490" in r and "DFS" in r:
|
|
raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed")
|
|
raise Exception("AP setup timed out")
|
|
|
|
freq = str(int(channel) * 5 + 5000)
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq=freq)
|
|
dev[0].wait_regdom(country_ie=True)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=" + freq not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=160 MHz" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].request("ABORT_SCAN")
|
|
dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht160_no_ht40(dev, apdev):
|
|
"""VHT with 160 MHz channel width and HT40 disabled"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "ZA",
|
|
"hw_mode": "a",
|
|
"channel": "108",
|
|
"ht_capab": "",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "2",
|
|
"vht_oper_centr_freq_seg0_idx": "114",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=2)
|
|
if not ev:
|
|
cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
|
|
reg = cmd.stdout.readlines()
|
|
for r in reg:
|
|
if "5490" in r and "DFS" in r:
|
|
raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed")
|
|
raise Exception("AP setup timed out")
|
|
if "AP-ENABLED" in ev:
|
|
# This was supposed to fail due to sec_channel_offset == 0
|
|
raise Exception("Unexpected AP-ENABLED")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
|
|
def test_ap_vht80plus80(dev, apdev):
|
|
"""VHT with 80+80 MHz channel width"""
|
|
try:
|
|
hapd = None
|
|
hapd2 = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "52",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "3",
|
|
"vht_oper_centr_freq_seg0_idx": "58",
|
|
"vht_oper_centr_freq_seg1_idx": "155",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
# This will actually fail since DFS on 80+80 is not yet supported
|
|
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
|
|
# ignore result to avoid breaking the test once 80+80 DFS gets enabled
|
|
|
|
params = { "ssid": "vht2",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "3",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"vht_oper_centr_freq_seg1_idx": "155" }
|
|
hapd2 = hostapd.add_ap(apdev[1], params, wait_enabled=False)
|
|
|
|
ev = hapd2.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5)
|
|
if not ev:
|
|
raise Exception("AP setup timed out(2)")
|
|
if "AP-DISABLED" in ev:
|
|
# Assume this failed due to missing regulatory update for now
|
|
raise HwsimSkip("80+80 MHz channel not supported in regulatory information")
|
|
|
|
state = hapd2.get_status_field("state")
|
|
if state != "ENABLED":
|
|
raise Exception("Unexpected interface state(2)")
|
|
|
|
dev[1].connect("vht2", key_mgmt="NONE", scan_freq="5180")
|
|
hwsim_utils.test_connectivity(dev[1], hapd2)
|
|
sig = dev[1].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=5180" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=80+80 MHz" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
if "CENTER_FRQ1=5210" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(3): " + str(sig))
|
|
if "CENTER_FRQ2=5775" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(4): " + str(sig))
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
if hapd2:
|
|
hapd2.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
def test_ap_vht80plus80_invalid(dev, apdev):
|
|
"""VHT with invalid 80+80 MHz channel"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "3",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"vht_oper_centr_freq_seg1_idx": "0",
|
|
'ieee80211d': '1',
|
|
'ieee80211h': '1' }
|
|
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
|
|
# This fails due to missing(invalid) seg1 configuration
|
|
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("AP-DISABLED not reported")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
|
|
def test_ap_vht80_csa(dev, apdev):
|
|
"""VHT with 80 MHz channel width and CSA"""
|
|
csa_supported(dev[0])
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "149",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "155" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
hapd.request("CHAN_SWITCH 5 5180 ht vht blocktx center_freq1=5210 sec_channel_offset=1 bandwidth=80")
|
|
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("CSA finished event timed out")
|
|
if "freq=5180" not in ev:
|
|
raise Exception("Unexpected channel in CSA finished event")
|
|
time.sleep(0.5)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
hapd.request("CHAN_SWITCH 5 5745")
|
|
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("CSA finished event timed out")
|
|
if "freq=5745" not in ev:
|
|
raise Exception("Unexpected channel in CSA finished event")
|
|
time.sleep(0.5)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
# This CSA to same channel will fail in kernel, so use this only for
|
|
# extra code coverage.
|
|
hapd.request("CHAN_SWITCH 5 5745")
|
|
hapd.wait_event(["AP-CSA-FINISHED"], timeout=1)
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht_csa_vht40(dev, apdev):
|
|
"""VHT CSA with VHT40 getting enabled"""
|
|
csa_supported(dev[0])
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "149",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "0" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
hapd.request("CHAN_SWITCH 5 5765 sec_channel_offset=-1 center_freq1=5755 bandwidth=40 vht")
|
|
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("CSA finished event timed out")
|
|
if "freq=5765" not in ev:
|
|
raise Exception("Unexpected channel in CSA finished event")
|
|
ev = dev[0].wait_event("CTRL-EVENT-CHANNEL-SWITCH", timeout=5)
|
|
if ev is None:
|
|
raise Exception("Channel switch event not seen")
|
|
if "freq=5765" not in ev:
|
|
raise Exception("Channel mismatch: " + ev)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
if ev is not None:
|
|
raise Exception("Unexpected disconnection event from station")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5765")
|
|
hwsim_utils.test_connectivity(dev[1], hapd)
|
|
|
|
if dev[1].get_status_field("ieee80211ac") != '1':
|
|
raise Exception("VHT not enabled as part of channel switch")
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
def test_ap_vht_csa_vht20(dev, apdev):
|
|
"""VHT CSA with VHT20 getting enabled"""
|
|
csa_supported(dev[0])
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "149",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "0" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
hapd.request("CHAN_SWITCH 5 5200 center_freq1=5200 bandwidth=20 vht")
|
|
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("CSA finished event timed out")
|
|
if "freq=5200" not in ev:
|
|
raise Exception("Unexpected channel in CSA finished event")
|
|
time.sleep(0.5)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200")
|
|
hwsim_utils.test_connectivity(dev[1], hapd)
|
|
|
|
if dev[1].get_status_field("ieee80211ac") != '1':
|
|
raise Exception("VHT not enabled as part of channel switch")
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
def test_ap_vht_csa_vht40_disable(dev, apdev):
|
|
"""VHT CSA with VHT40 getting disabled"""
|
|
csa_supported(dev[0])
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"channel": "149",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_capab": "",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "0" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
hapd.request("CHAN_SWITCH 5 5200 center_freq1=5200 bandwidth=40 ht")
|
|
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("CSA finished event timed out")
|
|
if "freq=5200" not in ev:
|
|
raise Exception("Unexpected channel in CSA finished event")
|
|
ev = dev[0].wait_event("CTRL-EVENT-CHANNEL-SWITCH", timeout=5)
|
|
if ev is None:
|
|
raise Exception("Channel switch event not seen")
|
|
if "freq=5200" not in ev:
|
|
raise Exception("Channel mismatch: " + ev)
|
|
time.sleep(0.5)
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200")
|
|
hwsim_utils.test_connectivity(dev[1], hapd)
|
|
|
|
if dev[1].get_status_field("ieee80211ac") == '1':
|
|
raise Exception("VHT not disabled as part of channel switch")
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
def test_ap_vht_on_24ghz(dev, apdev):
|
|
"""Subset of VHT features on 2.4 GHz"""
|
|
hapd = None
|
|
params = { "ssid": "test-vht-2g",
|
|
"hw_mode": "g",
|
|
"channel": "1",
|
|
"ieee80211n": "1",
|
|
"vendor_vht": "1",
|
|
"vht_capab": "[MAX-MPDU-11454]",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "1"
|
|
}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
try:
|
|
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 dd1300904c0400bf0c3240820feaff0000eaff0000"):
|
|
raise Exception("Failed to add vendor element")
|
|
dev[0].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sta = hapd.get_sta(dev[0].own_addr())
|
|
if '[VENDOR_VHT]' not in sta['flags']:
|
|
raise Exception("No VENDOR_VHT STA flag")
|
|
|
|
dev[1].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
|
|
sta = hapd.get_sta(dev[1].own_addr())
|
|
if '[VENDOR_VHT]' in sta['flags']:
|
|
raise Exception("Unexpected VENDOR_VHT STA flag")
|
|
finally:
|
|
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
|
|
|
|
def test_prefer_vht40(dev, apdev):
|
|
"""Preference on VHT40 over HT40"""
|
|
try:
|
|
hapd2 = None
|
|
|
|
params = { "ssid": "test",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ieee80211n": "1",
|
|
"ht_capab": "[HT40+]" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
params = { "ssid": "test",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"ht_capab": "[HT40+]",
|
|
"vht_capab": "",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "0",
|
|
}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
bssid2 = apdev[1]['bssid']
|
|
|
|
dev[0].scan_for_bss(bssid, freq=5180)
|
|
dev[0].scan_for_bss(bssid2, freq=5180)
|
|
dev[0].connect("test", scan_freq="5180", key_mgmt="NONE")
|
|
if dev[0].get_status_field('bssid') != bssid2:
|
|
raise Exception("Unexpected BSS selected")
|
|
|
|
est = dev[0].get_bss(bssid)['est_throughput']
|
|
if est != "135000":
|
|
raise Exception("Unexpected BSS0 est_throughput: " + est)
|
|
|
|
est = dev[0].get_bss(bssid2)['est_throughput']
|
|
if est != "135001":
|
|
raise Exception("Unexpected BSS1 est_throughput: " + est)
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd2:
|
|
hapd2.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht80_pwr_constraint(dev, apdev):
|
|
"""VHT with 80 MHz channel width and local power constraint"""
|
|
hapd = None
|
|
try:
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211d": "1",
|
|
"local_pwr_constraint": "3",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
|
|
dev[0].wait_regdom(country_ie=True)
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].request("ABORT_SCAN")
|
|
dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht_use_sta_nsts(dev, apdev):
|
|
"""VHT with 80 MHz channel width and use_sta_nsts=1"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42",
|
|
"use_sta_nsts": "1" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht_tkip(dev, apdev):
|
|
"""VHT and TKIP"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"wpa": "1",
|
|
"wpa_key_mgmt": "WPA-PSK",
|
|
"wpa_pairwise": "TKIP",
|
|
"wpa_passphrase": "12345678",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_oper_centr_freq_seg0_idx": "42" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
dev[0].connect("vht", psk="12345678", scan_freq="5180")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
sig = dev[0].request("SIGNAL_POLL").splitlines()
|
|
if "FREQUENCY=5180" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
|
|
if "WIDTH=20 MHz (no HT)" not in sig:
|
|
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
|
|
status = hapd.get_status()
|
|
logger.info("hostapd STATUS: " + str(status))
|
|
if status["ieee80211n"] != "0":
|
|
raise Exception("Unexpected STATUS ieee80211n value")
|
|
if status["ieee80211ac"] != "0":
|
|
raise Exception("Unexpected STATUS ieee80211ac value")
|
|
if status["secondary_channel"] != "0":
|
|
raise Exception("Unexpected STATUS secondary_channel value")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_vht_40_fallback_to_20(devs, apdevs):
|
|
"""VHT and 40 MHz channel configuration falling back to 20 MHz"""
|
|
dev = devs[0]
|
|
ap = apdevs[0]
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "test-vht40",
|
|
"country_code": "US",
|
|
"hw_mode": "a",
|
|
"basic_rates": "60 120 240",
|
|
"channel": "161",
|
|
"ieee80211d": "1",
|
|
"ieee80211h": "1",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"ht_capab": "[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]",
|
|
"vht_capab": "[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]",
|
|
"vht_oper_chwidth": "0",
|
|
"vht_oper_centr_freq_seg0_idx": "155",
|
|
}
|
|
hapd = hostapd.add_ap(ap, params)
|
|
dev.connect("test-vht40", scan_freq="5805", key_mgmt="NONE")
|
|
dev.wait_regdom(country_ie=True)
|
|
hwsim_utils.test_connectivity(dev, hapd)
|
|
finally:
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
dev.request("DISCONNECT")
|
|
dev.request("ABORT_SCAN")
|
|
dev.wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev.wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
|
|
dev.flush_scan_cache()
|
|
|
|
def test_ap_vht80_to_24g_ht(dev, apdev):
|
|
"""VHT with 80 MHz channel width reconfigured to 2.4 GHz HT"""
|
|
try:
|
|
hapd = None
|
|
params = { "ssid": "vht",
|
|
"country_code": "FI",
|
|
"hw_mode": "a",
|
|
"channel": "36",
|
|
"ht_capab": "[HT40+]",
|
|
"ieee80211n": "1",
|
|
"ieee80211ac": "1",
|
|
"vht_oper_chwidth": "1",
|
|
"vht_capab": "[MAX-MPDU-11454]",
|
|
"vht_oper_centr_freq_seg0_idx": "42" }
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
hapd.disable()
|
|
hapd.set("ieee80211ac", "0")
|
|
hapd.set("hw_mode", "g")
|
|
hapd.set("channel", "1")
|
|
hapd.set("ht_capab", "")
|
|
hapd.set("vht_capab", "")
|
|
hapd.enable()
|
|
|
|
dev[0].connect("vht", key_mgmt="NONE", scan_freq="2412")
|
|
except Exception, e:
|
|
if isinstance(e, Exception) and str(e) == "AP startup failed":
|
|
if not vht_supported():
|
|
raise HwsimSkip("80 MHz channel not supported in regulatory information")
|
|
raise
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
if hapd:
|
|
hapd.request("DISABLE")
|
|
subprocess.call(['iw', 'reg', 'set', '00'])
|
|
dev[0].flush_scan_cache()
|