hostap/tests/hwsim/test_ap_dynamic.py
Jouni Malinen cece9b7df7 tests: Dynamic BSS add operation reusing existing interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:04:18 +02:00

385 lines
14 KiB
Python

# Test cases for dynamic BSS changes with hostapd
# Copyright (c) 2013, Qualcomm Atheros, Inc.
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import time
import subprocess
import logging
logger = logging.getLogger()
import os
import hwsim_utils
import hostapd
def test_ap_change_ssid(dev, apdev):
"""Dynamic SSID change with hostapd and WPA2-PSK"""
params = hostapd.wpa2_params(ssid="test-wpa2-psk-start",
passphrase="12345678")
hostapd.add_ap(apdev[0]['ifname'], params)
id = dev[0].connect("test-wpa2-psk-start", psk="12345678",
scan_freq="2412")
dev[0].request("DISCONNECT")
logger.info("Change SSID dynamically")
hapd = hostapd.Hostapd(apdev[0]['ifname'])
res = hapd.request("SET ssid test-wpa2-psk-new")
if "OK" not in res:
raise Exception("SET command failed")
res = hapd.request("RELOAD")
if "OK" not in res:
raise Exception("RELOAD command failed")
dev[0].set_network_quoted(id, "ssid", "test-wpa2-psk-new")
dev[0].connect_network(id)
def multi_check(dev, check):
id = []
num_bss = len(check)
for i in range(0, num_bss):
dev[i].request("BSS_FLUSH 0")
dev[i].dump_monitor()
id.append(dev[i].connect("bss-" + str(i + 1), key_mgmt="NONE",
scan_freq="2412", wait_connect=check[i]))
for i in range(0, num_bss):
if not check[i]:
ev = dev[i].wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.2)
if ev:
raise Exception("Unexpected connection")
for i in range(0, num_bss):
dev[i].remove_network(id[i])
time.sleep(0.3)
res = ''
for i in range(0, num_bss):
res = res + dev[i].request("BSS RANGE=ALL MASK=0x2")
for i in range(0, num_bss):
if not check[i]:
bssid = '02:00:00:00:03:0' + str(i)
if bssid in res:
raise Exception("Unexpected BSS" + str(i) + " in scan results")
def test_ap_bss_add_remove(dev, apdev):
"""Dynamic BSS add/remove operations with hostapd"""
ifname1 = apdev[0]['ifname']
ifname2 = apdev[0]['ifname'] + '-2'
ifname3 = apdev[0]['ifname'] + '-3'
logger.info("Set up three BSSes one by one")
hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
multi_check(dev, [ True, False, False ])
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the last BSS and re-add it")
hostapd.remove_bss(ifname3)
multi_check(dev, [ True, True, False ])
hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the middle BSS and re-add it")
hostapd.remove_bss(ifname2)
multi_check(dev, [ True, False, True ])
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the first BSS and re-add it and other BSSs")
hostapd.remove_bss(ifname1)
multi_check(dev, [ False, False, False ])
hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove two BSSes and re-add them")
hostapd.remove_bss(ifname2)
multi_check(dev, [ True, False, True ])
hostapd.remove_bss(ifname3)
multi_check(dev, [ True, False, False ])
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove three BSSes in and re-add them")
hostapd.remove_bss(ifname3)
multi_check(dev, [ True, True, False ])
hostapd.remove_bss(ifname2)
multi_check(dev, [ True, False, False ])
hostapd.remove_bss(ifname1)
multi_check(dev, [ False, False, False ])
hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
multi_check(dev, [ True, False, False ])
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Test error handling if a duplicate ifname is tried")
hostapd.add_bss('phy3', ifname3, 'bss-3.conf', ignore_error=True)
multi_check(dev, [ True, True, True ])
def test_ap_bss_add_remove_during_ht_scan(dev, apdev):
"""Dynamic BSS add during HT40 co-ex scan"""
ifname1 = apdev[0]['ifname']
ifname2 = apdev[0]['ifname'] + '-2'
hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
multi_check(dev, [ True, True ])
hostapd.remove_bss(ifname2)
hostapd.remove_bss(ifname1)
hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
hostapd.remove_bss(ifname2)
multi_check(dev, [ True, False ])
hostapd.remove_bss(ifname1)
hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
hostapd.remove_bss(ifname1)
multi_check(dev, [ False, False ])
def test_ap_multi_bss_config(dev, apdev):
"""hostapd start with a multi-BSS configuration file"""
ifname1 = apdev[0]['ifname']
ifname2 = apdev[0]['ifname'] + '-2'
ifname3 = apdev[0]['ifname'] + '-3'
logger.info("Set up three BSSes with one configuration file")
hostapd.add_iface(ifname1, 'multi-bss.conf')
hapd = hostapd.Hostapd(ifname1)
hapd.enable()
multi_check(dev, [ True, True, True ])
hostapd.remove_bss(ifname2)
multi_check(dev, [ True, False, True ])
hostapd.remove_bss(ifname3)
multi_check(dev, [ True, False, False ])
hostapd.remove_bss(ifname1)
multi_check(dev, [ False, False, False ])
hostapd.add_iface(ifname1, 'multi-bss.conf')
hapd = hostapd.Hostapd(ifname1)
hapd.enable()
hostapd.remove_bss(ifname1)
multi_check(dev, [ False, False, False ])
def invalid_ap(hapd_global, ifname):
logger.info("Trying to start AP " + ifname + " with invalid configuration")
hapd_global.remove(ifname)
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
if not hapd.ping():
raise Exception("Could not ping hostapd")
hapd.set_defaults()
hapd.set("ssid", "invalid-config")
hapd.set("channel", "12345")
try:
hapd.enable()
started = True
except Exception, e:
started = False
if started:
raise Exception("ENABLE command succeeded unexpectedly")
return hapd
def test_ap_invalid_config(dev, apdev):
"""Try to start AP with invalid configuration and fix configuration"""
hapd_global = hostapd.HostapdGlobal()
ifname = apdev[0]['ifname']
hapd = invalid_ap(hapd_global, ifname)
logger.info("Fix configuration and start AP again")
hapd.set("channel", "1")
hapd.enable()
dev[0].connect("invalid-config", key_mgmt="NONE", scan_freq="2412")
def test_ap_invalid_config2(dev, apdev):
"""Try to start AP with invalid configuration and remove interface"""
hapd_global = hostapd.HostapdGlobal()
ifname = apdev[0]['ifname']
hapd = invalid_ap(hapd_global, ifname)
logger.info("Remove interface with failed configuration")
hapd_global.remove(ifname)
def test_ap_remove_during_acs(dev, apdev):
"""Remove interface during ACS"""
params = hostapd.wpa2_params(ssid="test-acs-remove", passphrase="12345678")
params['channel'] = '0'
ifname = apdev[0]['ifname']
hapd = hostapd.HostapdGlobal()
hostapd.add_ap(ifname, params)
hapd.remove(ifname)
def test_ap_remove_during_acs2(dev, apdev):
"""Remove BSS during ACS in multi-BSS configuration"""
ifname = apdev[0]['ifname']
ifname2 = ifname + "-2"
hapd_global = hostapd.HostapdGlobal()
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
hapd.set_defaults()
hapd.set("ssid", "test-acs-remove")
hapd.set("channel", "0")
hapd.set("bss", ifname2)
hapd.set("ssid", "test-acs-remove2")
hapd.enable()
hapd_global.remove(ifname)
def test_ap_remove_during_acs3(dev, apdev):
"""Remove second BSS during ACS in multi-BSS configuration"""
ifname = apdev[0]['ifname']
ifname2 = ifname + "-2"
hapd_global = hostapd.HostapdGlobal()
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
hapd.set_defaults()
hapd.set("ssid", "test-acs-remove")
hapd.set("channel", "0")
hapd.set("bss", ifname2)
hapd.set("ssid", "test-acs-remove2")
hapd.enable()
hapd_global.remove(ifname2)
def test_ap_remove_during_ht_coex_scan(dev, apdev):
"""Remove interface during HT co-ex scan"""
params = hostapd.wpa2_params(ssid="test-ht-remove", passphrase="12345678")
params['channel'] = '1'
params['ht_capab'] = "[HT40+]"
ifname = apdev[0]['ifname']
hapd = hostapd.HostapdGlobal()
hostapd.add_ap(ifname, params)
hapd.remove(ifname)
def test_ap_remove_during_ht_coex_scan2(dev, apdev):
"""Remove BSS during HT co-ex scan in multi-BSS configuration"""
ifname = apdev[0]['ifname']
ifname2 = ifname + "-2"
hapd_global = hostapd.HostapdGlobal()
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
hapd.set_defaults()
hapd.set("ssid", "test-ht-remove")
hapd.set("channel", "1")
hapd.set("ht_capab", "[HT40+]")
hapd.set("bss", ifname2)
hapd.set("ssid", "test-ht-remove2")
hapd.enable()
hapd_global.remove(ifname)
def test_ap_remove_during_ht_coex_scan3(dev, apdev):
"""Remove second BSS during HT co-ex scan in multi-BSS configuration"""
ifname = apdev[0]['ifname']
ifname2 = ifname + "-2"
hapd_global = hostapd.HostapdGlobal()
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
hapd.set_defaults()
hapd.set("ssid", "test-ht-remove")
hapd.set("channel", "1")
hapd.set("ht_capab", "[HT40+]")
hapd.set("bss", ifname2)
hapd.set("ssid", "test-ht-remove2")
hapd.enable()
hapd_global.remove(ifname2)
def test_ap_enable_disable_reenable(dev, apdev):
"""Enable, disable, re-enable AP"""
ifname = apdev[0]['ifname']
hapd_global = hostapd.HostapdGlobal()
hapd_global.add(ifname)
hapd = hostapd.Hostapd(ifname)
hapd.set_defaults()
hapd.set("ssid", "dynamic")
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED"], timeout=30)
if ev is None:
raise Exception("AP startup timed out")
dev[0].connect("dynamic", key_mgmt="NONE", scan_freq="2412")
hapd.disable()
ev = hapd.wait_event(["AP-DISABLED"], timeout=30)
if ev is None:
raise Exception("AP disabling timed out")
dev[0].wait_disconnected(timeout=10)
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED"], timeout=30)
if ev is None:
raise Exception("AP startup timed out")
dev[1].connect("dynamic", key_mgmt="NONE", scan_freq="2412")
dev[0].wait_connected(timeout=10)
def test_ap_double_disable(dev, apdev):
"""Double DISABLE regression test"""
hostapd.add_bss('phy3', apdev[0]['ifname'], 'bss-1.conf')
hostapd.add_bss('phy3', apdev[0]['ifname'] + '-2', 'bss-2.conf')
hapd = hostapd.Hostapd(apdev[0]['ifname'])
hapd.disable()
if "FAIL" not in hapd.request("DISABLE"):
raise Exception("Second DISABLE accepted unexpectedly")
hapd.enable()
hapd.disable()
if "FAIL" not in hapd.request("DISABLE"):
raise Exception("Second DISABLE accepted unexpectedly")
def test_ap_bss_add_many(dev, apdev):
"""Large number of BSS add operations with hostapd"""
try:
_test_ap_bss_add_many(dev, apdev)
finally:
dev[0].request("SCAN_INTERVAL 5")
ifname = apdev[0]['ifname']
hapd = hostapd.HostapdGlobal()
hapd.flush()
for i in range(16):
ifname2 = ifname + '-' + str(i)
hapd.remove(ifname2)
try:
os.remove('/tmp/hwsim-bss.conf')
except:
pass
def _test_ap_bss_add_many(dev, apdev):
ifname = apdev[0]['ifname']
phy = 'phy3'
hostapd.add_bss(phy, ifname, 'bss-1.conf')
hapd = hostapd.HostapdGlobal()
fname = '/tmp/hwsim-bss.conf'
for i in range(16):
ifname2 = ifname + '-' + str(i)
with open(fname, 'w') as f:
f.write("driver=nl80211\n")
f.write("hw_mode=g\n")
f.write("channel=1\n")
f.write("ieee80211n=1\n")
f.write("interface=%s\n" % ifname2)
f.write("bssid=02:00:00:00:03:%02x\n" % (i + 1))
f.write("ctrl_interface=/var/run/hostapd\n")
f.write("ssid=test-%d\n" % i)
hostapd.add_bss(phy, ifname2, fname)
os.remove(fname)
dev[0].request("SCAN_INTERVAL 1")
dev[0].connect("bss-1", key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=5)
for i in range(16):
dev[0].connect("test-%d" % i, key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=5)
ifname2 = ifname + '-' + str(i)
hapd.remove(ifname2)
def test_ap_bss_add_reuse_existing(dev, apdev):
"""Dynamic BSS add operation reusing existing interface"""
ifname1 = apdev[0]['ifname']
ifname2 = apdev[0]['ifname'] + '-2'
hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
subprocess.check_call(["iw", "dev", ifname1, "interface", "add", ifname2,
"type", "__ap"])
hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
hostapd.remove_bss(ifname2)
subprocess.check_call(["iw", "dev", ifname2, "del"])