8e416cecdb
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only after having sent out CTRL-EVENT-CONNECTED. As such, there was a race condition on the test case reading the wpa_supplicant process memory after the connection. This was unlikely to occur due to the one second sleep, but even with that, it would be at least theorically possible to hit this race under heavy load (e.g., when using large number of VMs to run parallel testing). Avoid this by running a PING command to make sure wpa_supplicant has returned to eloop before reading the process memory. This should make it less likely to report false positives on GTK being found in memory. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
1057 lines
43 KiB
Python
1057 lines
43 KiB
Python
# Fast BSS Transition tests
|
|
# Copyright (c) 2013-2015, Jouni Malinen <j@w1.fi>
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
import binascii
|
|
import os
|
|
import time
|
|
import subprocess
|
|
import logging
|
|
logger = logging.getLogger()
|
|
|
|
import hwsim_utils
|
|
import hostapd
|
|
from utils import HwsimSkip, alloc_fail, fail_test, skip_with_fips
|
|
from wlantest import Wlantest
|
|
from test_ap_psk import check_mib, find_wpas_process, read_process_memory, verify_not_present, get_key_locations
|
|
|
|
def ft_base_rsn():
|
|
params = { "wpa": "2",
|
|
"wpa_key_mgmt": "FT-PSK",
|
|
"rsn_pairwise": "CCMP" }
|
|
return params
|
|
|
|
def ft_base_mixed():
|
|
params = { "wpa": "3",
|
|
"wpa_key_mgmt": "WPA-PSK FT-PSK",
|
|
"wpa_pairwise": "TKIP",
|
|
"rsn_pairwise": "CCMP" }
|
|
return params
|
|
|
|
def ft_params(rsn=True, ssid=None, passphrase=None):
|
|
if rsn:
|
|
params = ft_base_rsn()
|
|
else:
|
|
params = ft_base_mixed()
|
|
if ssid:
|
|
params["ssid"] = ssid
|
|
if passphrase:
|
|
params["wpa_passphrase"] = passphrase
|
|
|
|
params["mobility_domain"] = "a1b2"
|
|
params["r0_key_lifetime"] = "10000"
|
|
params["pmk_r1_push"] = "1"
|
|
params["reassociation_deadline"] = "1000"
|
|
return params
|
|
|
|
def ft_params1(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas1.w1.fi"
|
|
params['r1_key_holder'] = "000102030405"
|
|
params['r0kh'] = [ "02:00:00:00:03:00 nas1.w1.fi 100102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 300102030405060708090a0b0c0d0e0f" ]
|
|
params['r1kh'] = "02:00:00:00:04:00 00:01:02:03:04:06 200102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params2(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params['r0kh'] = [ "02:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0e0f" ]
|
|
params['r1kh'] = "02:00:00:00:03:00 00:01:02:03:04:05 300102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params1_r0kh_mismatch(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas1.w1.fi"
|
|
params['r1_key_holder'] = "000102030405"
|
|
params['r0kh'] = [ "02:00:00:00:03:00 nas1.w1.fi 100102030405060708090a0b0c0d0e0f",
|
|
"12:00:00:00:04:00 nas2.w1.fi 300102030405060708090a0b0c0d0e0f" ]
|
|
params['r1kh'] = "12:00:00:00:04:00 10:01:02:03:04:06 200102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def ft_params2_incorrect_rrb_key(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params['r0kh'] = [ "02:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0ef1",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0ef2" ]
|
|
params['r1kh'] = "02:00:00:00:03:00 00:01:02:03:04:05 300102030405060708090a0b0c0d0ef3"
|
|
return params
|
|
|
|
def ft_params2_r0kh_mismatch(rsn=True, ssid=None, passphrase=None):
|
|
params = ft_params(rsn, ssid, passphrase)
|
|
params['nas_identifier'] = "nas2.w1.fi"
|
|
params['r1_key_holder'] = "000102030406"
|
|
params['r0kh'] = [ "12:00:00:00:03:00 nas1.w1.fi 200102030405060708090a0b0c0d0e0f",
|
|
"02:00:00:00:04:00 nas2.w1.fi 000102030405060708090a0b0c0d0e0f" ]
|
|
params['r1kh'] = "12:00:00:00:03:00 10:01:02:03:04:05 300102030405060708090a0b0c0d0e0f"
|
|
return params
|
|
|
|
def run_roams(dev, apdev, hapd0, hapd1, ssid, passphrase, over_ds=False,
|
|
sae=False, eap=False, fail_test=False, roams=1,
|
|
pairwise_cipher="CCMP", group_cipher="TKIP CCMP", ptk_rekey="0"):
|
|
logger.info("Connect to first AP")
|
|
if eap:
|
|
dev.connect(ssid, key_mgmt="FT-EAP", proto="WPA2", ieee80211w="1",
|
|
eap="GPSK", identity="gpsk user",
|
|
password="abcdefghijklmnop0123456789abcdef",
|
|
scan_freq="2412",
|
|
pairwise=pairwise_cipher, group=group_cipher,
|
|
wpa_ptk_rekey=ptk_rekey)
|
|
else:
|
|
if sae:
|
|
key_mgmt="FT-SAE"
|
|
else:
|
|
key_mgmt="FT-PSK"
|
|
dev.connect(ssid, psk=passphrase, key_mgmt=key_mgmt, proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412",
|
|
pairwise=pairwise_cipher, group=group_cipher,
|
|
wpa_ptk_rekey=ptk_rekey)
|
|
if dev.get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap1 = apdev[0]
|
|
ap2 = apdev[1]
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
ap1 = apdev[1]
|
|
ap2 = apdev[0]
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
hwsim_utils.test_connectivity(dev, hapd1ap)
|
|
|
|
dev.scan_for_bss(ap2['bssid'], freq="2412")
|
|
|
|
for i in range(0, roams):
|
|
logger.info("Roam to the second AP")
|
|
if over_ds:
|
|
dev.roam_over_ds(ap2['bssid'], fail_test=fail_test)
|
|
else:
|
|
dev.roam(ap2['bssid'], fail_test=fail_test)
|
|
if fail_test:
|
|
return
|
|
if dev.get_status_field('bssid') != ap2['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
if i == 0 or i == roams - 1:
|
|
hwsim_utils.test_connectivity(dev, hapd2ap)
|
|
|
|
logger.info("Roam back to the first AP")
|
|
if over_ds:
|
|
dev.roam_over_ds(ap1['bssid'])
|
|
else:
|
|
dev.roam(ap1['bssid'])
|
|
if dev.get_status_field('bssid') != ap1['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
if i == 0 or i == roams - 1:
|
|
hwsim_utils.test_connectivity(dev, hapd1ap)
|
|
|
|
def test_ap_ft(dev, apdev):
|
|
"""WPA2-PSK-FT AP"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
|
|
def test_ap_ft_many(dev, apdev):
|
|
"""WPA2-PSK-FT AP multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, roams=50)
|
|
|
|
def test_ap_ft_mixed(dev, apdev):
|
|
"""WPA2-PSK-FT mixed-mode AP"""
|
|
ssid = "test-ft-mixed"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(rsn=False, ssid=ssid, passphrase=passphrase)
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
vals = key_mgmt.split(' ')
|
|
if vals[0] != "WPA-PSK" or vals[1] != "FT-PSK":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(rsn=False, ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase)
|
|
|
|
def test_ap_ft_pmf(dev, apdev):
|
|
"""WPA2-PSK-FT AP with PMF"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
|
|
def test_ap_ft_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-4"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-4") ])
|
|
|
|
def test_ap_ft_over_ds_many(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS multiple times"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
roams=50)
|
|
|
|
def test_ap_ft_over_ds_unknown_target(dev, apdev):
|
|
"""WPA2-PSK-FT AP"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
dev[0].roam_over_ds("02:11:22:33:44:55", fail_test=True)
|
|
|
|
def test_ap_ft_over_ds_unexpected(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS and unexpected response"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap1 = apdev[0]
|
|
ap2 = apdev[1]
|
|
hapd1ap = hapd0
|
|
hapd2ap = hapd1
|
|
else:
|
|
ap1 = apdev[1]
|
|
ap2 = apdev[0]
|
|
hapd1ap = hapd1
|
|
hapd2ap = hapd0
|
|
|
|
addr = dev[0].own_addr()
|
|
hapd1ap.set("ext_mgmt_frame_handling", "1")
|
|
logger.info("Foreign STA address")
|
|
msg = {}
|
|
msg['fc'] = 13 << 4
|
|
msg['da'] = addr
|
|
msg['sa'] = ap1['bssid']
|
|
msg['bssid'] = ap1['bssid']
|
|
msg['payload'] = binascii.unhexlify("06021122334455660102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No over-the-DS in progress")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Non-zero status code")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060100")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
hapd1ap.dump_monitor()
|
|
|
|
dev[0].scan_for_bss(ap2['bssid'], freq="2412")
|
|
if "OK" not in dev[0].request("FT_DS " + ap2['bssid']):
|
|
raise Exception("FT_DS failed")
|
|
|
|
req = hapd1ap.mgmt_rx()
|
|
|
|
logger.info("Foreign Target AP")
|
|
msg['payload'] = binascii.unhexlify("0602" + addr.replace(':', '') + "0102030405060000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
addrs = addr.replace(':', '') + ap2['bssid'].replace(':', '')
|
|
|
|
logger.info("No IEs")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "0000")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Invalid IEs (trigger parsing failure)")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003700")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Too short MDIE")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "000036021122")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("Mobility domain mismatch")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603112201")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No FTIE")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("FTIE SNonce mismatch")
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + "1000000000000000000000000000000000000000000000000000000000000001" + "030a6e6173322e77312e6669")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R0KH-ID subelem in FTIE")
|
|
snonce = binascii.hexlify(req['payload'][111:111+32])
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b20137520000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce)
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R0KH-ID subelem mismatch in FTIE")
|
|
snonce = binascii.hexlify(req['payload'][111:111+32])
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a11223344556677889900")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No R1KH-ID subelem in FTIE")
|
|
r0khid = binascii.hexlify(req['payload'][145:145+10])
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b201375e0000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a" + r0khid)
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
logger.info("No RSNE")
|
|
r0khid = binascii.hexlify(req['payload'][145:145+10])
|
|
msg['payload'] = binascii.unhexlify("0602" + addrs + "00003603a1b20137660000" + "00000000000000000000000000000000" + "0000000000000000000000000000000000000000000000000000000000000000" + snonce + "030a" + r0khid + "0106000102030405")
|
|
hapd1ap.mgmt_tx(msg)
|
|
|
|
def test_ap_ft_pmf_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with PMF"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
|
|
def test_ap_ft_over_ds_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS (pull PMK)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
|
|
|
|
def test_ap_ft_sae(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-SAE":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
|
|
dev[0].request("SET sae_groups ")
|
|
run_roams(dev[0], apdev, hapd0, hapd, ssid, passphrase, sae=True)
|
|
|
|
def test_ap_ft_sae_over_ds(dev, apdev):
|
|
"""WPA2-PSK-FT-SAE AP over DS"""
|
|
if "SAE" not in dev[0].get_capability("auth_alg"):
|
|
raise HwsimSkip("SAE not supported")
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-SAE"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
dev[0].request("SET sae_groups ")
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, sae=True,
|
|
over_ds=True)
|
|
|
|
def test_ap_ft_eap(dev, apdev):
|
|
"""WPA2-EAP-FT AP"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(radius.items() + params.items())
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-EAP":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params = dict(radius.items() + params.items())
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True)
|
|
if "[WPA2-FT/EAP-CCMP]" not in dev[0].request("SCAN_RESULTS"):
|
|
raise Exception("Scan results missing RSN element info")
|
|
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-3"),
|
|
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-3") ])
|
|
|
|
# Verify EAPOL reauthentication after FT protocol
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
ap = hapd
|
|
else:
|
|
ap = hapd1
|
|
ap.request("EAPOL_REAUTH " + dev[0].own_addr())
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP authentication did not succeed")
|
|
time.sleep(0.1)
|
|
hwsim_utils.test_connectivity(dev[0], ap)
|
|
|
|
def test_ap_ft_eap_pull(dev, apdev):
|
|
"""WPA2-EAP-FT AP (pull PMK)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
radius = hostapd.radius_params()
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
params = dict(radius.items() + params.items())
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
key_mgmt = hapd.get_config()['key_mgmt']
|
|
if key_mgmt.split(' ')[0] != "FT-EAP":
|
|
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_key_mgmt'] = "FT-EAP"
|
|
params["ieee8021x"] = "1"
|
|
params["pmk_r1_push"] = "0"
|
|
params = dict(radius.items() + params.items())
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_key_push(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching RRB key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_key_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching RRB key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2_incorrect_rrb_key(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_r0kh_id_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH-ID (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
params["nas_identifier"] = "nas0.w1.fi"
|
|
hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].roam_over_ds(apdev[1]['bssid'], fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_r0kh_push(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH key (push)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "2";
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_mismatching_rrb_r0kh_pull(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS with mismatching R0KH key (pull)"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1_r0kh_mismatch(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params["pmk_r1_push"] = "0"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
|
|
fail_test=True)
|
|
|
|
def test_ap_ft_gtk_rekey(dev, apdev):
|
|
"""WPA2-PSK-FT AP and GTK rekey"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412")
|
|
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out after initial association")
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_group_rekey'] = '1'
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].roam(apdev[1]['bssid'])
|
|
if dev[0].get_status_field('bssid') != apdev[1]['bssid']:
|
|
raise Exception("Did not connect to correct AP")
|
|
hwsim_utils.test_connectivity(dev[0], hapd1)
|
|
|
|
ev = dev[0].wait_event(["WPA: Group rekeying completed"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("GTK rekey timed out after FT protocol")
|
|
hwsim_utils.test_connectivity(dev[0], hapd1)
|
|
|
|
def test_ft_psk_key_lifetime_in_memory(dev, apdev, params):
|
|
"""WPA2-PSK-FT and key lifetime in memory"""
|
|
ssid = "test-ft"
|
|
passphrase="04c2726b4b8d5f1b4db9c07aa4d9e9d8f765cb5d25ec817e6cc4fcdd5255db0"
|
|
psk = '93c90846ff67af9037ed83fb72b63dbeddaa81d47f926c20909b5886f1d9358d'
|
|
pmk = binascii.unhexlify(psk)
|
|
p = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], p)
|
|
p = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], p)
|
|
|
|
pid = find_wpas_process(dev[0])
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
# The decrypted copy of GTK is freed only after the CTRL-EVENT-CONNECTED
|
|
# event has been delivered, so verify that wpa_supplicant has returned to
|
|
# eloop before reading process memory.
|
|
time.sleep(1)
|
|
dev[0].ping()
|
|
|
|
buf = read_process_memory(pid, pmk)
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
dev[0].relog()
|
|
pmkr0 = None
|
|
pmkr1 = None
|
|
ptk = None
|
|
gtk = None
|
|
with open(os.path.join(params['logdir'], 'log0'), 'r') as f:
|
|
for l in f.readlines():
|
|
if "FT: PMK-R0 - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
pmkr0 = binascii.unhexlify(val)
|
|
if "FT: PMK-R1 - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
pmkr1 = binascii.unhexlify(val)
|
|
if "FT: KCK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
kck = binascii.unhexlify(val)
|
|
if "FT: KEK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
kek = binascii.unhexlify(val)
|
|
if "FT: TK - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
tk = binascii.unhexlify(val)
|
|
if "WPA: Group Key - hexdump" in l:
|
|
val = l.strip().split(':')[3].replace(' ', '')
|
|
gtk = binascii.unhexlify(val)
|
|
if not pmkr0 or not pmkr1 or not kck or not kek or not tk or not gtk:
|
|
raise Exception("Could not find keys from debug log")
|
|
if len(gtk) != 16:
|
|
raise Exception("Unexpected GTK length")
|
|
|
|
logger.info("Checking keys in memory while associated")
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
if pmk not in buf:
|
|
raise HwsimSkip("PMK not found while associated")
|
|
if pmkr0 not in buf:
|
|
raise HwsimSkip("PMK-R0 not found while associated")
|
|
if pmkr1 not in buf:
|
|
raise HwsimSkip("PMK-R1 not found while associated")
|
|
if kck not in buf:
|
|
raise Exception("KCK not found while associated")
|
|
if kek not in buf:
|
|
raise Exception("KEK not found while associated")
|
|
if tk in buf:
|
|
raise Exception("TK found from memory")
|
|
if gtk in buf:
|
|
get_key_locations(buf, gtk, "GTK")
|
|
raise Exception("GTK found from memory")
|
|
|
|
logger.info("Checking keys in memory after disassociation")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
|
|
# Note: PMK/PSK is still present in network configuration
|
|
|
|
fname = os.path.join(params['logdir'],
|
|
'ft_psk_key_lifetime_in_memory.memctx-')
|
|
verify_not_present(buf, pmkr0, fname, "PMK-R0")
|
|
verify_not_present(buf, pmkr1, fname, "PMK-R1")
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
|
|
logger.info("Checking keys in memory after network profile removal")
|
|
buf = read_process_memory(pid, pmk)
|
|
get_key_locations(buf, pmk, "PMK")
|
|
get_key_locations(buf, pmkr0, "PMK-R0")
|
|
get_key_locations(buf, pmkr1, "PMK-R1")
|
|
|
|
verify_not_present(buf, pmk, fname, "PMK")
|
|
verify_not_present(buf, pmkr0, fname, "PMK-R0")
|
|
verify_not_present(buf, pmkr1, fname, "PMK-R1")
|
|
verify_not_present(buf, kck, fname, "KCK")
|
|
verify_not_present(buf, kek, fname, "KEK")
|
|
verify_not_present(buf, tk, fname, "TK")
|
|
verify_not_present(buf, gtk, fname, "GTK")
|
|
|
|
def test_ap_ft_invalid_resp(dev, apdev):
|
|
"""WPA2-PSK-FT AP and invalid response IEs"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
tests = [
|
|
# Various IEs for test coverage. The last one is FTIE with invalid
|
|
# R1KH-ID subelement.
|
|
"020002000000" + "3800" + "38051122334455" + "3754000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010100",
|
|
# FTIE with invalid R0KH-ID subelement (len=0).
|
|
"020002000000" + "3754000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010300",
|
|
# FTIE with invalid R0KH-ID subelement (len=49).
|
|
"020002000000" + "378500010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001033101020304050607080910111213141516171819202122232425262728293031323334353637383940414243444546474849",
|
|
# Invalid RSNE.
|
|
"020002000000" + "3000",
|
|
# Required IEs missing from protected IE count.
|
|
"020002000000" + "3603a1b201" + "375200010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900",
|
|
# RIC missing from protected IE count.
|
|
"020002000000" + "3603a1b201" + "375200020203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900",
|
|
# Protected IE missing.
|
|
"020002000000" + "3603a1b201" + "375200ff0203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607080900010203040506070809000102030405060708090001" + "3900" + "0000" ]
|
|
for t in tests:
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
hapd1.set("ext_mgmt_frame_handling", "1")
|
|
hapd1.dump_monitor()
|
|
if "OK" not in dev[0].request("ROAM " + apdev[1]['bssid']):
|
|
raise Exception("ROAM failed")
|
|
auth = None
|
|
for i in range(20):
|
|
msg = hapd1.mgmt_rx()
|
|
if msg['subtype'] == 11:
|
|
auth = msg
|
|
break
|
|
if not auth:
|
|
raise Exception("Authentication frame not seen")
|
|
|
|
resp = {}
|
|
resp['fc'] = auth['fc']
|
|
resp['da'] = auth['sa']
|
|
resp['sa'] = auth['da']
|
|
resp['bssid'] = auth['bssid']
|
|
resp['payload'] = binascii.unhexlify(t)
|
|
hapd1.mgmt_tx(resp)
|
|
hapd1.set("ext_mgmt_frame_handling", "0")
|
|
dev[0].wait_disconnected()
|
|
|
|
dev[0].request("RECONNECT")
|
|
dev[0].wait_connected()
|
|
|
|
def test_ap_ft_gcmp_256(dev, apdev):
|
|
"""WPA2-PSK-FT AP with GCMP-256 cipher"""
|
|
if "GCMP-256" not in dev[0].get_capability("pairwise"):
|
|
raise HwsimSkip("Cipher GCMP-256 not supported")
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['rsn_pairwise'] = "GCMP-256"
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['rsn_pairwise'] = "GCMP-256"
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase,
|
|
pairwise_cipher="GCMP-256", group_cipher="GCMP-256")
|
|
|
|
def test_ap_ft_oom(dev, apdev):
|
|
"""WPA2-PSK-FT and OOM"""
|
|
skip_with_fips(dev[0])
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
dst = apdev[1]['bssid']
|
|
else:
|
|
dst = apdev[0]['bssid']
|
|
|
|
dev[0].scan_for_bss(dst, freq="2412")
|
|
with alloc_fail(dev[0], 1, "wpa_ft_gen_req_ies"):
|
|
dev[0].roam(dst)
|
|
with alloc_fail(dev[0], 1, "wpa_ft_mic"):
|
|
dev[0].roam(dst, fail_test=True)
|
|
with fail_test(dev[0], 1, "os_get_random;wpa_ft_prepare_auth_request"):
|
|
dev[0].roam(dst, fail_test=True)
|
|
|
|
def test_ap_ft_over_ds_proto(dev, apdev):
|
|
"""WPA2-PSK-FT AP over DS protocol testing"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
# FT Action Response while no FT-over-DS in progress
|
|
msg = {}
|
|
msg['fc'] = 13 << 4
|
|
msg['da'] = dev[0].own_addr()
|
|
msg['sa'] = apdev[0]['bssid']
|
|
msg['bssid'] = apdev[0]['bssid']
|
|
msg['payload'] = binascii.unhexlify("06020200000000000200000004000000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
hapd0.set("ext_mgmt_frame_handling", "1")
|
|
hapd0.dump_monitor()
|
|
dev[0].request("FT_DS " + apdev[1]['bssid'])
|
|
for i in range(0, 10):
|
|
req = hapd0.mgmt_rx()
|
|
if req is None:
|
|
raise Exception("MGMT RX wait timed out")
|
|
if req['subtype'] == 13:
|
|
break
|
|
req = None
|
|
if not req:
|
|
raise Exception("FT Action frame not received")
|
|
|
|
# FT Action Response for unexpected Target AP
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "f20000000400" + "0000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response without MDIE
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response without FTIE
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000" + "3603a1b201")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
# FT Action Response with FTIE SNonce mismatch
|
|
msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000" + "3603a1b201" + "3766000000000000000000000000000000000000c4e67ac1999bebd00ff4ae4d5dcaf87896bb060b469f7c78d49623fb395c3455ffffff6b693fe6f8d8c5dfac0a22344750775bd09437f98b238c9f87b97f790c0106000102030406030a6e6173312e77312e6669")
|
|
hapd0.mgmt_tx(msg)
|
|
|
|
def test_ap_ft_rrb(dev, apdev):
|
|
"""WPA2-PSK-FT RRB protocol testing"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
|
|
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
scan_freq="2412")
|
|
|
|
_dst_ll = binascii.unhexlify(apdev[0]['bssid'].replace(':',''))
|
|
_src_ll = binascii.unhexlify(dev[0].own_addr().replace(':',''))
|
|
proto = '\x89\x0d'
|
|
ehdr = _dst_ll + _src_ll + proto
|
|
|
|
# Too short RRB frame
|
|
pkt = ehdr + '\x01'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB discarded frame wikth unrecognized type
|
|
pkt = ehdr + '\x02' + '\x02' + '\x01\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB frame too short for action frame
|
|
pkt = ehdr + '\x01' + '\x02' + '\x01\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short RRB frame (not enough room for Action Frame body)
|
|
pkt = ehdr + '\x01' + '\x02' + '\x00\x00' + _src_ll
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Unexpected Action frame category
|
|
pkt = ehdr + '\x01' + '\x02' + '\x0e\x00' + _src_ll + '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Unexpected Action in RRB Request
|
|
pkt = ehdr + '\x01' + '\x00' + '\x0e\x00' + _src_ll + '\x06\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Target AP address in RRB Request does not match with own address
|
|
pkt = ehdr + '\x01' + '\x00' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Not enough room for status code in RRB Response
|
|
pkt = ehdr + '\x01' + '\x01' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB discarded frame with unknown packet_type
|
|
pkt = ehdr + '\x01' + '\x02' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB Response with non-zero status code; no STA match
|
|
pkt = ehdr + '\x01' + '\x01' + '\x10\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' + '\xff\xff'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# RRB Response with zero status code and extra data; STA match
|
|
pkt = ehdr + '\x01' + '\x01' + '\x11\x00' + _src_ll + '\x06\x01' + _src_ll + '\x00\x00\x00\x00\x00\x00' + '\x00\x00' + '\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 pull
|
|
pkt = ehdr + '\x01' + '\xc8' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 resp
|
|
pkt = ehdr + '\x01' + '\xc9' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# Too short PMK-R1 push
|
|
pkt = ehdr + '\x01' + '\xca' + '\x0e\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
# No matching R0KH address found for PMK-R0 pull response
|
|
pkt = ehdr + '\x01' + '\xc9' + '\x5a\x00' + _src_ll + '\x06\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' + 76*'\00'
|
|
if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
|
|
raise Exception("DATA_TEST_FRAME failed")
|
|
|
|
def test_rsn_ie_proto_ft_psk_sta(dev, apdev):
|
|
"""RSN element protocol testing for FT-PSK + PMF cases on STA side"""
|
|
bssid = apdev[0]['bssid']
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params["ieee80211w"] = "1";
|
|
# This is the RSN element used normally by hostapd
|
|
params['own_ie_override'] = '30140100000fac040100000fac040100000fac048c00' + '3603a1b201'
|
|
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
id = dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
|
|
ieee80211w="1", scan_freq="2412",
|
|
pairwise="CCMP", group="CCMP")
|
|
|
|
tests = [ ('PMKIDCount field included',
|
|
'30160100000fac040100000fac040100000fac048c000000' + '3603a1b201'),
|
|
('Extra IE before RSNE',
|
|
'dd0400000000' + '30140100000fac040100000fac040100000fac048c00' + '3603a1b201'),
|
|
('PMKIDCount and Group Management Cipher suite fields included',
|
|
'301a0100000fac040100000fac040100000fac048c000000000fac06' + '3603a1b201'),
|
|
('Extra octet after defined fields (future extensibility)',
|
|
'301b0100000fac040100000fac040100000fac048c000000000fac0600' + '3603a1b201'),
|
|
('No RSN Capabilities field (PMF disabled in practice)',
|
|
'30120100000fac040100000fac040100000fac04' + '3603a1b201') ]
|
|
for txt,ie in tests:
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
logger.info(txt)
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', ie)
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
dev[0].wait_connected()
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info('Invalid RSNE causing internal hostapd error')
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', '30130100000fac040100000fac040100000fac048c' + '3603a1b201')
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
# hostapd fails to generate EAPOL-Key msg 3/4, so this connection cannot
|
|
# complete.
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected connection")
|
|
dev[0].request("DISCONNECT")
|
|
|
|
logger.info('Unexpected PMKID causing internal hostapd error')
|
|
hapd.disable()
|
|
hapd.set('own_ie_override', '30260100000fac040100000fac040100000fac048c000100ffffffffffffffffffffffffffffffff' + '3603a1b201')
|
|
hapd.enable()
|
|
dev[0].request("BSS_FLUSH 0")
|
|
dev[0].scan_for_bss(bssid, 2412, force_scan=True, only_new=True)
|
|
dev[0].select_network(id, freq=2412)
|
|
# hostapd fails to generate EAPOL-Key msg 3/4, so this connection cannot
|
|
# complete.
|
|
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected connection")
|
|
dev[0].request("DISCONNECT")
|
|
|
|
def test_ap_ft_ptk_rekey(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by station after roam"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, ptk_rekey="1")
|
|
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED",
|
|
"WPA: Key negotiation completed"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No event received after roam")
|
|
if "CTRL-EVENT-DISCONNECTED" in ev:
|
|
raise Exception("Unexpected disconnection after roam")
|
|
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
hapd = hapd0
|
|
else:
|
|
hapd = hapd1
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|
|
|
|
def test_ap_ft_ptk_rekey_ap(dev, apdev):
|
|
"""WPA2-PSK-FT PTK rekeying triggered by AP after roam"""
|
|
ssid = "test-ft"
|
|
passphrase="12345678"
|
|
|
|
params = ft_params1(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
|
|
params = ft_params2(ssid=ssid, passphrase=passphrase)
|
|
params['wpa_ptk_rekey'] = '2'
|
|
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
|
|
|
|
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase)
|
|
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED",
|
|
"WPA: Key negotiation completed"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No event received after roam")
|
|
if "CTRL-EVENT-DISCONNECTED" in ev:
|
|
raise Exception("Unexpected disconnection after roam")
|
|
|
|
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
|
|
hapd = hapd0
|
|
else:
|
|
hapd = hapd1
|
|
hwsim_utils.test_connectivity(dev[0], hapd)
|