hostap/tests/hwsim/test_ap_vht.py
Jouni Malinen f382af2c1e tests: Avoid hapd reference before assignment on error cases
Couple of VHT test cases missed explicit setting of hapd to None before
trying to start hostapd. Add those to avoid unexpected exceptions in
case hostapd start fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 12:59:53 +03:00

1215 lines
49 KiB
Python

# Test cases for VHT operations with hostapd
# Copyright (c) 2014, Qualcomm Atheros, Inc.
# Copyright (c) 2013, Intel Corporation
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import logging
logger = logging.getLogger()
import os
import subprocess, time
import hwsim_utils
import hostapd
from wpasupplicant import WpaSupplicant
from utils import *
from test_dfs import wait_dfs_event
def test_ap_vht80(dev, apdev):
"""VHT with 80 MHz channel width"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
hwsim_utils.test_connectivity(dev[0], hapd)
sig = dev[0].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=5180" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=80 MHz" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
est = dev[0].get_bss(bssid)['est_throughput']
if est != "390001":
raise Exception("Unexpected BSS est_throughput: " + est)
status = dev[0].get_status()
if status["ieee80211ac"] != "1":
raise Exception("Unexpected STATUS ieee80211ac value (STA)")
status = hapd.get_status()
logger.info("hostapd STATUS: " + str(status))
if status["ieee80211n"] != "1":
raise Exception("Unexpected STATUS ieee80211n value")
if status["ieee80211ac"] != "1":
raise Exception("Unexpected STATUS ieee80211ac value")
if status["secondary_channel"] != "1":
raise Exception("Unexpected STATUS secondary_channel value")
if status["vht_oper_chwidth"] != "1":
raise Exception("Unexpected STATUS vht_oper_chwidth value")
if status["vht_oper_centr_freq_seg0_idx"] != "42":
raise Exception("Unexpected STATUS vht_oper_centr_freq_seg0_idx value")
if "vht_caps_info" not in status:
raise Exception("Missing vht_caps_info")
sta = hapd.get_sta(dev[0].own_addr())
logger.info("hostapd STA: " + str(sta))
if "[HT]" not in sta['flags']:
raise Exception("Missing STA flag: HT")
if "[VHT]" not in sta['flags']:
raise Exception("Missing STA flag: VHT")
if 'supp_op_classes' not in sta or len(sta['supp_op_classes']) < 2:
raise Exception("No Supported Operating Classes information for STA")
opclass = int(sta['supp_op_classes'][0:2], 16)
if opclass != 128:
raise Exception("Unexpected Current Operating Class from STA: %d" % opclass)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
clear_regdom(hapd, dev)
def test_ap_vht_wifi_generation(dev, apdev):
"""VHT and wifi_generation"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
status = dev[0].get_status()
if 'wifi_generation' not in status:
# For now, assume this is because of missing kernel support
raise HwsimSkip("Association Request IE reporting not supported")
#raise Exception("Missing wifi_generation information")
if status['wifi_generation'] != "5":
raise Exception("Unexpected wifi_generation value: " + status['wifi_generation'])
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("vht", key_mgmt="NONE", scan_freq="5180")
status = wpas.get_status()
if 'wifi_generation' not in status:
# For now, assume this is because of missing kernel support
raise HwsimSkip("Association Request IE reporting not supported")
#raise Exception("Missing wifi_generation information (connect)")
if status['wifi_generation'] != "5":
raise Exception("Unexpected wifi_generation value (connect): " + status['wifi_generation'])
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
clear_regdom(hapd, dev)
def vht80_test(apdev, dev, channel, ht_capab):
clear_scan_cache(apdev)
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": str(channel),
"ht_capab": ht_capab,
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev, params)
bssid = apdev['bssid']
dev[0].connect("vht", key_mgmt="NONE",
scan_freq=str(5000 + 5 * channel))
hwsim_utils.test_connectivity(dev[0], hapd)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht80b(dev, apdev):
"""VHT with 80 MHz channel width (HT40- channel 40)"""
vht80_test(apdev[0], dev, 40, "[HT40-]")
def test_ap_vht80c(dev, apdev):
"""VHT with 80 MHz channel width (HT40+ channel 44)"""
vht80_test(apdev[0], dev, 44, "[HT40+]")
def test_ap_vht80d(dev, apdev):
"""VHT with 80 MHz channel width (HT40- channel 48)"""
vht80_test(apdev[0], dev, 48, "[HT40-]")
def test_ap_vht80_params(dev, apdev):
"""VHT with 80 MHz channel width and number of optional features enabled"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_capab": "[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP0]",
"vht_oper_centr_freq_seg0_idx": "42",
"require_vht": "1"}
hapd = hostapd.add_ap(apdev[0], params)
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5180",
disable_vht="1", wait_connect=False)
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
dev[2].connect("vht", key_mgmt="NONE", scan_freq="5180",
disable_sgi="1")
ev = dev[1].wait_event(["CTRL-EVENT-ASSOC-REJECT"])
if ev is None:
raise Exception("Association rejection timed out")
if "status_code=104" not in ev:
raise Exception("Unexpected rejection status code")
dev[1].request("DISCONNECT")
hwsim_utils.test_connectivity(dev[0], hapd)
sta0 = hapd.get_sta(dev[0].own_addr())
sta2 = hapd.get_sta(dev[2].own_addr())
capab0 = int(sta0['vht_caps_info'], base=16)
capab2 = int(sta2['vht_caps_info'], base=16)
if capab0 & 0x60 == 0:
raise Exception("dev[0] did not support SGI")
if capab2 & 0x60 != 0:
raise Exception("dev[2] claimed support for SGI")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev, count=3)
def test_ap_vht80_invalid(dev, apdev):
"""VHT with invalid 80 MHz channel configuration (seg1)"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42",
"vht_oper_centr_freq_seg1_idx": "155",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
# This fails due to unexpected seg1 configuration
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("AP-DISABLED not reported")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht80_invalid2(dev, apdev):
"""VHT with invalid 80 MHz channel configuration (seg0)"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "46",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
# This fails due to invalid seg0 configuration
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("AP-DISABLED not reported")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht_20(devs, apdevs):
"""VHT and 20 MHz channel"""
dev = devs[0]
ap = apdevs[0]
try:
hapd = None
params = {"ssid": "test-vht20",
"country_code": "DE",
"hw_mode": "a",
"channel": "36",
"ieee80211n": "1",
"ieee80211ac": "1",
"ht_capab": "",
"vht_capab": "",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "0",
"supported_rates": "60 120 240 360 480 540",
"require_vht": "1"}
hapd = hostapd.add_ap(ap, params)
dev.connect("test-vht20", scan_freq="5180", key_mgmt="NONE")
hwsim_utils.test_connectivity(dev, hapd)
sta = hapd.get_sta(dev.own_addr())
if 'supp_op_classes' not in sta or len(sta['supp_op_classes']) < 2:
raise Exception("No Supported Operating Classes information for STA")
opclass = int(sta['supp_op_classes'][0:2], 16)
if opclass != 115:
raise Exception("Unexpected Current Operating Class from STA: %d" % opclass)
finally:
dev.request("DISCONNECT")
clear_regdom(hapd, devs)
def test_ap_vht_40(devs, apdevs):
"""VHT and 40 MHz channel"""
dev = devs[0]
ap = apdevs[0]
try:
hapd = None
params = {"ssid": "test-vht40",
"country_code": "DE",
"hw_mode": "a",
"channel": "36",
"ieee80211n": "1",
"ieee80211ac": "1",
"ht_capab": "[HT40+]",
"vht_capab": "",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "0"}
hapd = hostapd.add_ap(ap, params)
dev.connect("test-vht40", scan_freq="5180", key_mgmt="NONE")
hwsim_utils.test_connectivity(dev, hapd)
sta = hapd.get_sta(dev.own_addr())
if 'supp_op_classes' not in sta or len(sta['supp_op_classes']) < 2:
raise Exception("No Supported Operating Classes information for STA")
opclass = int(sta['supp_op_classes'][0:2], 16)
if opclass != 116:
raise Exception("Unexpected Current Operating Class from STA: %d" % opclass)
finally:
dev.request("DISCONNECT")
clear_regdom(hapd, devs)
def test_ap_vht_capab_not_supported(dev, apdev):
"""VHT configuration with driver not supporting all vht_capab entries"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_capab": "[MAX-MPDU-7991][MAX-MPDU-11454][VHT160][VHT160-80PLUS80][RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-STBC-1][RX-STBC-12][RX-STBC-123][RX-STBC-1234][SU-BEAMFORMER][SU-BEAMFORMEE][BF-ANTENNA-2][BF-ANTENNA-3][BF-ANTENNA-4][SOUNDING-DIMENSION-2][SOUNDING-DIMENSION-3][SOUNDING-DIMENSION-4][MU-BEAMFORMER][VHT-TXOP-PS][HTC-VHT][MAX-A-MPDU-LEN-EXP0][MAX-A-MPDU-LEN-EXP7][VHT-LINK-ADAPT2][VHT-LINK-ADAPT3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]",
"vht_oper_centr_freq_seg0_idx": "42",
"require_vht": "1"}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("Startup failure not reported")
for i in range(1, 7):
if "OK" not in hapd.request("SET vht_capab [MAX-A-MPDU-LEN-EXP%d]" % i):
raise Exception("Unexpected SET failure")
finally:
clear_regdom(hapd, dev)
def test_ap_vht160(dev, apdev):
"""VHT with 160 MHz channel width (1)"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "2",
"vht_oper_centr_freq_seg0_idx": "50",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = wait_dfs_event(hapd, "DFS-CAC-START", 5)
if "DFS-CAC-START" not in ev:
raise Exception("Unexpected DFS event")
state = hapd.get_status_field("state")
if state != "DFS":
if state == "DISABLED" and not os.path.exists("dfs"):
# Not all systems have recent enough CRDA version and
# wireless-regdb changes to support 160 MHz and DFS. For now,
# do not report failures for this test case.
raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz")
raise Exception("Unexpected interface state: " + state)
logger.info("Waiting for CAC to complete")
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
if "success=1" not in ev:
raise Exception("CAC failed")
if "freq=5180" not in ev:
raise Exception("Unexpected DFS freq result")
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out")
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state")
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
dev[0].wait_regdom(country_ie=True)
hwsim_utils.test_connectivity(dev[0], hapd)
sig = dev[0].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=5180" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=160 MHz" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
sta = hapd.get_sta(dev[0].own_addr())
if 'supp_op_classes' not in sta or len(sta['supp_op_classes']) < 2:
raise Exception("No Supported Operating Classes information for STA")
opclass = int(sta['supp_op_classes'][0:2], 16)
if opclass != 129:
raise Exception("Unexpected Current Operating Class from STA: %d" % opclass)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
def test_ap_vht160b(dev, apdev):
"""VHT with 160 MHz channel width (2)"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "104",
"ht_capab": "[HT40-]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "2",
"vht_oper_centr_freq_seg0_idx": "114",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[1], params, wait_enabled=False)
ev = wait_dfs_event(hapd, "DFS-CAC-START", 5)
if "DFS-CAC-START" not in ev:
raise Exception("Unexpected DFS event(2)")
state = hapd.get_status_field("state")
if state != "DFS":
if state == "DISABLED" and not os.path.exists("dfs"):
# Not all systems have recent enough CRDA version and
# wireless-regdb changes to support 160 MHz and DFS. For now,
# do not report failures for this test case.
raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz")
raise Exception("Unexpected interface state: " + state)
logger.info("Waiting for CAC to complete")
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
if "success=1" not in ev:
raise Exception("CAC failed(2)")
if "freq=5520" not in ev:
raise Exception("Unexpected DFS freq result(2)")
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out(2)")
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state(2)")
freq = hapd.get_status_field("freq")
if freq != "5520":
raise Exception("Unexpected frequency(2)")
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5520")
dev[0].wait_regdom(country_ie=True)
hwsim_utils.test_connectivity(dev[0], hapd)
sig = dev[0].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=5520" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=160 MHz" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
def test_ap_vht160_no_dfs_100_plus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (100 plus)"""
run_ap_vht160_no_dfs(dev, apdev, "100", "[HT40+]")
def test_ap_vht160_no_dfs(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (104 minus)"""
run_ap_vht160_no_dfs(dev, apdev, "104", "[HT40-]")
def test_ap_vht160_no_dfs_108_plus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (108 plus)"""
run_ap_vht160_no_dfs(dev, apdev, "108", "[HT40+]")
def test_ap_vht160_no_dfs_112_minus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (112 minus)"""
run_ap_vht160_no_dfs(dev, apdev, "112", "[HT40-]")
def test_ap_vht160_no_dfs_116_plus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (116 plus)"""
run_ap_vht160_no_dfs(dev, apdev, "116", "[HT40+]")
def test_ap_vht160_no_dfs_120_minus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (120 minus)"""
run_ap_vht160_no_dfs(dev, apdev, "120", "[HT40-]")
def test_ap_vht160_no_dfs_124_plus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (124 plus)"""
run_ap_vht160_no_dfs(dev, apdev, "124", "[HT40+]")
def test_ap_vht160_no_dfs_128_minus(dev, apdev):
"""VHT with 160 MHz channel width and no DFS (128 minus)"""
run_ap_vht160_no_dfs(dev, apdev, "128", "[HT40-]")
def run_ap_vht160_no_dfs(dev, apdev, channel, ht_capab):
try:
hapd = None
params = {"ssid": "vht",
"country_code": "ZA",
"hw_mode": "a",
"channel": channel,
"ht_capab": ht_capab,
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "2",
"vht_oper_centr_freq_seg0_idx": "114",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = hapd.wait_event(["AP-ENABLED"], timeout=2)
if not ev:
cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
reg = cmd.stdout.readlines()
for r in reg:
if "5490" in r and "DFS" in r:
raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed")
raise Exception("AP setup timed out")
freq = str(int(channel) * 5 + 5000)
dev[0].connect("vht", key_mgmt="NONE", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
hwsim_utils.test_connectivity(dev[0], hapd)
sig = dev[0].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=" + freq not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=160 MHz" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht160_no_ht40(dev, apdev):
"""VHT with 160 MHz channel width and HT40 disabled"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "ZA",
"hw_mode": "a",
"channel": "108",
"ht_capab": "",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "2",
"vht_oper_centr_freq_seg0_idx": "114",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=2)
if not ev:
cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
reg = cmd.stdout.readlines()
for r in reg:
if "5490" in r and "DFS" in r:
raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed")
raise Exception("AP setup timed out")
if "AP-ENABLED" in ev:
# This was supposed to fail due to sec_channel_offset == 0
raise Exception("Unexpected AP-ENABLED")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht80plus80(dev, apdev):
"""VHT with 80+80 MHz channel width"""
try:
hapd = None
hapd2 = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "52",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "3",
"vht_oper_centr_freq_seg0_idx": "58",
"vht_oper_centr_freq_seg1_idx": "155",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
# This will actually fail since DFS on 80+80 is not yet supported
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
# ignore result to avoid breaking the test once 80+80 DFS gets enabled
params = {"ssid": "vht2",
"country_code": "US",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "3",
"vht_oper_centr_freq_seg0_idx": "42",
"vht_oper_centr_freq_seg1_idx": "155"}
hapd2 = hostapd.add_ap(apdev[1], params, wait_enabled=False)
ev = hapd2.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out(2)")
if "AP-DISABLED" in ev:
# Assume this failed due to missing regulatory update for now
raise HwsimSkip("80+80 MHz channel not supported in regulatory information")
state = hapd2.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state(2)")
dev[1].connect("vht2", key_mgmt="NONE", scan_freq="5180")
hwsim_utils.test_connectivity(dev[1], hapd2)
sig = dev[1].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=5180" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=80+80 MHz" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
if "CENTER_FRQ1=5210" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(3): " + str(sig))
if "CENTER_FRQ2=5775" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(4): " + str(sig))
sta = hapd2.get_sta(dev[1].own_addr())
if 'supp_op_classes' not in sta or len(sta['supp_op_classes']) < 2:
raise Exception("No Supported Operating Classes information for STA")
opclass = int(sta['supp_op_classes'][0:2], 16)
if opclass != 130:
raise Exception("Unexpected Current Operating Class from STA: %d" % opclass)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
dev[1].request("DISCONNECT")
if hapd:
hapd.request("DISABLE")
if hapd2:
hapd2.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].flush_scan_cache()
dev[1].flush_scan_cache()
def test_ap_vht80plus80_invalid(dev, apdev):
"""VHT with invalid 80+80 MHz channel"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "3",
"vht_oper_centr_freq_seg0_idx": "42",
"vht_oper_centr_freq_seg1_idx": "0",
'ieee80211d': '1',
'ieee80211h': '1'}
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
# This fails due to missing(invalid) seg1 configuration
ev = hapd.wait_event(["AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("AP-DISABLED not reported")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht80_csa(dev, apdev):
"""VHT with 80 MHz channel width and CSA"""
csa_supported(dev[0])
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "149",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "155"}
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
hwsim_utils.test_connectivity(dev[0], hapd)
hapd.request("CHAN_SWITCH 5 5180 ht vht blocktx center_freq1=5210 sec_channel_offset=1 bandwidth=80")
ev = hapd.wait_event(["CTRL-EVENT-STARTED-CHANNEL-SWITCH"], timeout=10)
if ev is None:
raise Exception("Channel switch start event not seen")
if "freq=5180" not in ev:
raise Exception("Unexpected channel in CS started")
ev = hapd.wait_event(["CTRL-EVENT-CHANNEL-SWITCH"], timeout=10)
if ev is None:
raise Exception("Channel switch completion event not seen")
if "freq=5180" not in ev:
raise Exception("Unexpected channel in CS completed")
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
if ev is None:
raise Exception("CSA finished event timed out")
if "freq=5180" not in ev:
raise Exception("Unexpected channel in CSA finished event")
time.sleep(0.5)
hwsim_utils.test_connectivity(dev[0], hapd)
hapd.request("CHAN_SWITCH 5 5745")
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
if ev is None:
raise Exception("CSA finished event timed out")
if "freq=5745" not in ev:
raise Exception("Unexpected channel in CSA finished event")
time.sleep(0.5)
hwsim_utils.test_connectivity(dev[0], hapd)
# This CSA to same channel will fail in kernel, so use this only for
# extra code coverage.
hapd.request("CHAN_SWITCH 5 5745")
hapd.wait_event(["AP-CSA-FINISHED"], timeout=1)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
clear_regdom(hapd, dev)
def test_ap_vht_csa_vht40(dev, apdev):
"""VHT CSA with VHT40 getting enabled"""
csa_supported(dev[0])
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "149",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "0"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
hwsim_utils.test_connectivity(dev[0], hapd)
hapd.request("CHAN_SWITCH 5 5765 sec_channel_offset=-1 center_freq1=5755 bandwidth=40 vht")
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
if ev is None:
raise Exception("CSA finished event timed out")
if "freq=5765" not in ev:
raise Exception("Unexpected channel in CSA finished event")
ev = dev[0].wait_event(["CTRL-EVENT-CHANNEL-SWITCH"], timeout=5)
if ev is None:
raise Exception("Channel switch event not seen")
if "freq=5765" not in ev:
raise Exception("Channel mismatch: " + ev)
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=0.5)
if ev is not None:
raise Exception("Unexpected disconnection event from station")
hwsim_utils.test_connectivity(dev[0], hapd)
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5765")
hwsim_utils.test_connectivity(dev[1], hapd)
if dev[1].get_status_field("ieee80211ac") != '1':
raise Exception("VHT not enabled as part of channel switch")
finally:
dev[0].request("DISCONNECT")
dev[1].request("DISCONNECT")
if hapd:
hapd.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].flush_scan_cache()
dev[1].flush_scan_cache()
def test_ap_vht_csa_vht20(dev, apdev):
"""VHT CSA with VHT20 getting enabled"""
csa_supported(dev[0])
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "149",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "0"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745")
hwsim_utils.test_connectivity(dev[0], hapd)
hapd.request("CHAN_SWITCH 5 5200 center_freq1=5200 bandwidth=20 vht")
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
if ev is None:
raise Exception("CSA finished event timed out")
if "freq=5200" not in ev:
raise Exception("Unexpected channel in CSA finished event")
time.sleep(0.5)
hwsim_utils.test_connectivity(dev[0], hapd)
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200")
hwsim_utils.test_connectivity(dev[1], hapd)
if dev[1].get_status_field("ieee80211ac") != '1':
raise Exception("VHT not enabled as part of channel switch")
finally:
dev[0].request("DISCONNECT")
dev[1].request("DISCONNECT")
if hapd:
hapd.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].flush_scan_cache()
dev[1].flush_scan_cache()
def test_ap_vht_csa_vht40_disable(dev, apdev):
"""VHT CSA with VHT40 getting disabled"""
csa_supported(dev[0])
try:
hapd = None
params = {"ssid": "vht",
"country_code": "US",
"hw_mode": "a",
"channel": "149",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_capab": "",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "0"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5200 5745")
hwsim_utils.test_connectivity(dev[0], hapd)
hapd.request("CHAN_SWITCH 5 5200 center_freq1=5210 sec_channel_offset=1 bandwidth=40 ht")
ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10)
if ev is None:
raise Exception("CSA finished event timed out")
if "freq=5200" not in ev:
raise Exception("Unexpected channel in CSA finished event")
ev = dev[0].wait_event(["CTRL-EVENT-CHANNEL-SWITCH"], timeout=5)
if ev is None:
raise Exception("Channel switch event not seen")
if "freq=5200" not in ev:
raise Exception("Channel mismatch: " + ev)
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
if ev:
# mac80211 does not support CSA to disable VHT, so the channel
# switch will be followed by disconnection and attempt to reconnect.
# Wait for that here to avoid failing the test case based on how
# example the connectivity test would get timed compared to getting
# disconnected or reconnected.
dev[0].wait_connected()
hwsim_utils.test_connectivity(dev[0], hapd)
dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200")
hwsim_utils.test_connectivity(dev[1], hapd)
if dev[1].get_status_field("ieee80211ac") == '1':
raise Exception("VHT not disabled as part of channel switch")
finally:
dev[0].request("DISCONNECT")
dev[1].request("DISCONNECT")
if hapd:
hapd.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].flush_scan_cache()
dev[1].flush_scan_cache()
def test_ap_vht_on_24ghz(dev, apdev):
"""Subset of VHT features on 2.4 GHz"""
hapd = None
params = {"ssid": "test-vht-2g",
"hw_mode": "g",
"channel": "1",
"ieee80211n": "1",
"vendor_vht": "1",
"vht_capab": "[MAX-MPDU-11454]",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "1"}
hapd = hostapd.add_ap(apdev[0], params)
try:
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 dd1300904c0400bf0c3240820feaff0000eaff0000"):
raise Exception("Failed to add vendor element")
dev[0].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
hapd.wait_sta()
hwsim_utils.test_connectivity(dev[0], hapd)
sta = hapd.get_sta(dev[0].own_addr())
if '[VENDOR_VHT]' not in sta['flags']:
raise Exception("No VENDOR_VHT STA flag")
dev[1].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
hapd.wait_sta()
sta = hapd.get_sta(dev[1].own_addr())
if '[VENDOR_VHT]' in sta['flags']:
raise Exception("Unexpected VENDOR_VHT STA flag")
status = dev[0].get_status()
if 'wifi_generation' in status:
if status['wifi_generation'] != "4":
raise Exception("Unexpected wifi_generation value: " + status['wifi_generation'])
status = dev[1].get_status()
if 'wifi_generation' in status:
if status['wifi_generation'] != "4":
raise Exception("Unexpected wifi_generation value(2): " + status['wifi_generation'])
finally:
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
def test_ap_vht_on_24ghz_2(dev, apdev):
"""Subset of VHT features on 2.4 GHz (2)"""
hapd = None
params = {"ssid": "test-vht-2g",
"hw_mode": "g",
"channel": "1",
"ieee80211n": "1",
"ieee80211ac": "1",
"vendor_vht": "1",
"vht_capab": "[MAX-MPDU-11454]",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "1"}
hapd = hostapd.add_ap(apdev[0], params)
try:
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 bf0cfa048003aaaa0000aaaa0000dd1300904c0400bf0c3240820feaff0000eaff0000"):
raise Exception("Failed to add vendor element")
dev[0].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
hapd.wait_sta()
hwsim_utils.test_connectivity(dev[0], hapd)
sta = hapd.get_sta(dev[0].own_addr())
if '[VHT]' not in sta['flags']:
raise Exception("No VHT STA flag")
dev[1].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE")
hapd.wait_sta()
sta = hapd.get_sta(dev[1].own_addr())
if '[VENDOR_VHT]' in sta['flags']:
raise Exception("Unexpected VENDOR_VHT STA flag")
if '[VHT]' in sta['flags']:
raise Exception("Unexpected VHT STA flag")
status = dev[0].get_status()
if 'wifi_generation' in status:
if status['wifi_generation'] != "4":
raise Exception("Unexpected wifi_generation value: " + status['wifi_generation'])
status = dev[1].get_status()
if 'wifi_generation' in status:
if status['wifi_generation'] != "4":
raise Exception("Unexpected wifi_generation value(2): " + status['wifi_generation'])
finally:
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
def test_prefer_vht40(dev, apdev):
"""Preference on VHT40 over HT40"""
try:
hapd = None
hapd2 = None
params = {"ssid": "test",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ieee80211n": "1",
"ht_capab": "[HT40+]"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
params = {"ssid": "test",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ieee80211n": "1",
"ieee80211ac": "1",
"ht_capab": "[HT40+]",
"vht_capab": "",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "0"}
hapd2 = hostapd.add_ap(apdev[1], params)
bssid2 = apdev[1]['bssid']
dev[0].scan_for_bss(bssid, freq=5180)
dev[0].scan_for_bss(bssid2, freq=5180)
dev[0].connect("test", scan_freq="5180", key_mgmt="NONE")
if dev[0].get_status_field('bssid') != bssid2:
raise Exception("Unexpected BSS selected")
est = dev[0].get_bss(bssid)['est_throughput']
if est != "135000":
raise Exception("Unexpected BSS0 est_throughput: " + est)
est = dev[0].get_bss(bssid2)['est_throughput']
if est != "180001":
raise Exception("Unexpected BSS1 est_throughput: " + est)
finally:
dev[0].request("DISCONNECT")
disable_hapd(hapd)
disable_hapd(hapd2)
clear_regdom_dev(dev)
def test_ap_vht80_pwr_constraint(dev, apdev):
"""VHT with 80 MHz channel width and local power constraint"""
hapd = None
try:
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211d": "1",
"local_pwr_constraint": "3",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
dev[0].wait_regdom(country_ie=True)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
def test_ap_vht_use_sta_nsts(dev, apdev):
"""VHT with 80 MHz channel width and use_sta_nsts=1"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42",
"use_sta_nsts": "1"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180")
hwsim_utils.test_connectivity(dev[0], hapd)
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
clear_regdom(hapd, dev)
def test_ap_vht_tkip(dev, apdev):
"""VHT and TKIP"""
skip_without_tkip(dev[0])
try:
hapd = None
params = {"ssid": "vht",
"wpa": "1",
"wpa_key_mgmt": "WPA-PSK",
"wpa_pairwise": "TKIP",
"wpa_passphrase": "12345678",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
dev[0].connect("vht", psk="12345678", scan_freq="5180")
hwsim_utils.test_connectivity(dev[0], hapd)
sig = dev[0].request("SIGNAL_POLL").splitlines()
if "FREQUENCY=5180" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
if "WIDTH=20 MHz (no HT)" not in sig:
raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
status = hapd.get_status()
logger.info("hostapd STATUS: " + str(status))
if status["ieee80211n"] != "0":
raise Exception("Unexpected STATUS ieee80211n value")
if status["ieee80211ac"] != "0":
raise Exception("Unexpected STATUS ieee80211ac value")
if status["secondary_channel"] != "0":
raise Exception("Unexpected STATUS secondary_channel value")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
clear_regdom(hapd, dev)
def test_ap_vht_40_fallback_to_20(devs, apdevs):
"""VHT and 40 MHz channel configuration falling back to 20 MHz"""
dev = devs[0]
ap = apdevs[0]
try:
hapd = None
params = {"ssid": "test-vht40",
"country_code": "US",
"hw_mode": "a",
"basic_rates": "60 120 240",
"channel": "161",
"ieee80211d": "1",
"ieee80211h": "1",
"ieee80211n": "1",
"ieee80211ac": "1",
"ht_capab": "[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]",
"vht_capab": "[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "155"}
hapd = hostapd.add_ap(ap, params)
dev.connect("test-vht40", scan_freq="5805", key_mgmt="NONE")
dev.wait_regdom(country_ie=True)
hwsim_utils.test_connectivity(dev, hapd)
finally:
clear_regdom(hapd, devs)
def test_ap_vht80_to_24g_ht(dev, apdev):
"""VHT with 80 MHz channel width reconfigured to 2.4 GHz HT"""
try:
hapd = None
params = {"ssid": "vht",
"country_code": "FI",
"hw_mode": "a",
"channel": "36",
"ht_capab": "[HT40+]",
"ieee80211n": "1",
"ieee80211ac": "1",
"vht_oper_chwidth": "1",
"vht_capab": "[MAX-MPDU-11454]",
"vht_oper_centr_freq_seg0_idx": "42"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
hapd.disable()
hapd.set("ieee80211ac", "0")
hapd.set("hw_mode", "g")
hapd.set("channel", "1")
hapd.set("ht_capab", "")
hapd.set("vht_capab", "")
hapd.enable()
dev[0].connect("vht", key_mgmt="NONE", scan_freq="2412")
except Exception as e:
if isinstance(e, Exception) and str(e) == "AP startup failed":
if not vht_supported():
raise HwsimSkip("80 MHz channel not supported in regulatory information")
raise
finally:
dev[0].request("DISCONNECT")
clear_regdom(hapd, dev)