21cf2c5baf
This makes it more convenient to run tests with builds that disable TKIP/WPA(v1) support completely. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
10450 lines
412 KiB
Python
10450 lines
412 KiB
Python
# WPS tests
|
|
# Copyright (c) 2013-2017, Jouni Malinen <j@w1.fi>
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
from remotehost import remote_compatible
|
|
from tshark import run_tshark
|
|
import base64
|
|
import binascii
|
|
from Crypto.Cipher import AES
|
|
import hashlib
|
|
import hmac
|
|
import os
|
|
import time
|
|
import sys
|
|
import stat
|
|
import subprocess
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import re
|
|
import socket
|
|
import struct
|
|
try:
|
|
from http.client import HTTPConnection
|
|
from urllib.request import urlopen
|
|
from urllib.parse import urlparse, urljoin
|
|
from urllib.error import HTTPError
|
|
from io import StringIO
|
|
from socketserver import StreamRequestHandler, TCPServer
|
|
except ImportError:
|
|
from httplib import HTTPConnection
|
|
from urllib import urlopen
|
|
from urlparse import urlparse, urljoin
|
|
from urllib2 import build_opener, ProxyHandler, HTTPError
|
|
from StringIO import StringIO
|
|
from SocketServer import StreamRequestHandler, TCPServer
|
|
import urllib
|
|
import xml.etree.ElementTree as ET
|
|
|
|
import hwsim_utils
|
|
import hostapd
|
|
from wpasupplicant import WpaSupplicant
|
|
from utils import *
|
|
from test_ap_eap import int_eap_server_params
|
|
from test_sae import check_sae_capab
|
|
from test_wep import check_wep_capa
|
|
|
|
def wps_start_ap(apdev, ssid="test-wps-conf"):
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
return hostapd.add_ap(apdev, params)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_init(dev, apdev):
|
|
"""Initial AP configuration with first WPS Enrollee"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1"})
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"):
|
|
raise Exception("PBC status not shown correctly")
|
|
|
|
id = dev[0].add_network()
|
|
dev[0].set_network_quoted(id, "ssid", "home")
|
|
dev[0].set_network_quoted(id, "psk", "12345678")
|
|
dev[0].request("ENABLE_NETWORK %s no-connect" % id)
|
|
|
|
id = dev[0].add_network()
|
|
dev[0].set_network_quoted(id, "ssid", "home2")
|
|
dev[0].set_network(id, "bssid", "00:11:22:33:44:55")
|
|
dev[0].set_network(id, "key_mgmt", "NONE")
|
|
dev[0].request("ENABLE_NETWORK %s no-connect" % id)
|
|
|
|
dev[0].request("WPS_PBC")
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
status = hapd.request("WPS_GET_STATUS")
|
|
if "PBC Status: Disabled" not in status:
|
|
raise Exception("PBC status not shown correctly")
|
|
if "Last WPS result: Success" not in status:
|
|
raise Exception("Last WPS result not shown correctly")
|
|
if "Peer Address: " + dev[0].p2p_interface_addr() not in status:
|
|
raise Exception("Peer address not shown correctly")
|
|
conf = hapd.request("GET_CONFIG")
|
|
if "wps_state=configured" not in conf:
|
|
raise Exception("AP not in WPS configured state")
|
|
if "wpa=3" not in conf:
|
|
raise Exception("AP not in WPA+WPA2 configuration")
|
|
if "rsn_pairwise_cipher=CCMP TKIP" not in conf:
|
|
raise Exception("Unexpected rsn_pairwise_cipher")
|
|
if "wpa_pairwise_cipher=CCMP TKIP" not in conf:
|
|
raise Exception("Unexpected wpa_pairwise_cipher")
|
|
if "group_cipher=TKIP" not in conf:
|
|
raise Exception("Unexpected group_cipher")
|
|
|
|
if len(dev[0].list_networks()) != 3:
|
|
raise Exception("Unexpected number of network blocks")
|
|
|
|
def test_ap_wps_init_2ap_pbc(dev, apdev):
|
|
"""Initial two-radio AP configuration with first WPS PBC Enrollee"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hostapd.add_ap(apdev[1], params)
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-PBC]" not in bss['flags']:
|
|
raise Exception("WPS-PBC flag missing from AP1")
|
|
bss = dev[0].get_bss(apdev[1]['bssid'])
|
|
if "[WPS-PBC]" not in bss['flags']:
|
|
raise Exception("WPS-PBC flag missing from AP2")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("SET wps_cred_processing 2")
|
|
dev[0].request("WPS_PBC")
|
|
ev = dev[0].wait_event(["WPS-CRED-RECEIVED"], timeout=30)
|
|
dev[0].request("SET wps_cred_processing 0")
|
|
if ev is None:
|
|
raise Exception("WPS cred event not seen")
|
|
if "100e" not in ev:
|
|
raise Exception("WPS attributes not included in the cred event")
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[1].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-PBC]" in bss['flags']:
|
|
raise Exception("WPS-PBC flag not cleared from AP1")
|
|
bss = dev[1].get_bss(apdev[1]['bssid'])
|
|
if "[WPS-PBC]" in bss['flags']:
|
|
raise Exception("WPS-PBC flag not cleared from AP2")
|
|
|
|
def test_ap_wps_init_2ap_pin(dev, apdev):
|
|
"""Initial two-radio AP configuration with first WPS PIN Enrollee"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hostapd.add_ap(apdev[1], params)
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" not in bss['flags']:
|
|
raise Exception("WPS-AUTH flag missing from AP1")
|
|
bss = dev[0].get_bss(apdev[1]['bssid'])
|
|
if "[WPS-AUTH]" not in bss['flags']:
|
|
raise Exception("WPS-AUTH flag missing from AP2")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN any " + pin)
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[1].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" in bss['flags']:
|
|
raise Exception("WPS-AUTH flag not cleared from AP1")
|
|
bss = dev[1].get_bss(apdev[1]['bssid'])
|
|
if "[WPS-AUTH]" in bss['flags']:
|
|
raise Exception("WPS-AUTH flag not cleared from AP2")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_init_through_wps_config(dev, apdev):
|
|
"""Initial AP configuration using wps_config command"""
|
|
ssid = "test-wps-init-config"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1"})
|
|
if "FAIL" in hapd.request("WPS_CONFIG " + binascii.hexlify(ssid.encode()).decode() + " WPA2PSK CCMP " + binascii.hexlify(b"12345678").decode()):
|
|
raise Exception("WPS_CONFIG command failed")
|
|
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on WPS-NEW-AP-SETTINGS events")
|
|
# It takes some time for the AP to update Beacon and Probe Response frames,
|
|
# so wait here before requesting the scan to be started to avoid adding
|
|
# extra five second wait to the test due to fetching obsolete scan results.
|
|
hapd.ping()
|
|
time.sleep(0.2)
|
|
dev[0].connect(ssid, psk="12345678", scan_freq="2412", proto="WPA2",
|
|
pairwise="CCMP", group="CCMP")
|
|
|
|
if "FAIL" not in hapd.request("WPS_CONFIG foo"):
|
|
raise Exception("Invalid WPS_CONFIG accepted")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_init_through_wps_config_2(dev, apdev):
|
|
"""AP configuration using wps_config and wps_cred_processing=2"""
|
|
ssid = "test-wps-init-config"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"wps_cred_processing": "2"})
|
|
if "FAIL" in hapd.request("WPS_CONFIG " + binascii.hexlify(ssid.encode()).decode() + " WPA2PSK CCMP " + binascii.hexlify(b"12345678").decode()):
|
|
raise Exception("WPS_CONFIG command failed")
|
|
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on WPS-NEW-AP-SETTINGS events")
|
|
if "100e" not in ev:
|
|
raise Exception("WPS-NEW-AP-SETTINGS did not include Credential")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_invalid_wps_config_passphrase(dev, apdev):
|
|
"""AP configuration using wps_config command with invalid passphrase"""
|
|
ssid = "test-wps-init-config"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1"})
|
|
if "FAIL" not in hapd.request("WPS_CONFIG " + binascii.hexlify(ssid.encode()).decode() + " WPA2PSK CCMP " + binascii.hexlify(b"1234567").decode()):
|
|
raise Exception("Invalid WPS_CONFIG command accepted")
|
|
|
|
def test_ap_wps_conf(dev, apdev):
|
|
"""WPS PBC provisioning with configured AP"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].set("device_name", "Device A")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED':
|
|
raise Exception("Not fully connected")
|
|
if status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Unexpected BSSID")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
sta = hapd.get_sta(dev[0].p2p_interface_addr())
|
|
if 'wpsDeviceName' not in sta or sta['wpsDeviceName'] != "Device A":
|
|
raise Exception("Device name not available in STA command")
|
|
|
|
def test_ap_wps_conf_5ghz(dev, apdev):
|
|
"""WPS PBC provisioning with configured AP on 5 GHz band"""
|
|
try:
|
|
hapd = None
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"country_code": "FI", "hw_mode": "a", "channel": "36"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].set("device_name", "Device A")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="5180")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
sta = hapd.get_sta(dev[0].p2p_interface_addr())
|
|
if 'wpsDeviceName' not in sta or sta['wpsDeviceName'] != "Device A":
|
|
raise Exception("Device name not available in STA command")
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
clear_regdom(hapd, dev)
|
|
|
|
def test_ap_wps_conf_chan14(dev, apdev):
|
|
"""WPS PBC provisioning with configured AP on channel 14"""
|
|
try:
|
|
hapd = None
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"country_code": "JP", "hw_mode": "b", "channel": "14"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].set("device_name", "Device A")
|
|
dev[0].request("WPS_PBC")
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
sta = hapd.get_sta(dev[0].p2p_interface_addr())
|
|
if 'wpsDeviceName' not in sta or sta['wpsDeviceName'] != "Device A":
|
|
raise Exception("Device name not available in STA command")
|
|
finally:
|
|
dev[0].request("DISCONNECT")
|
|
clear_regdom(hapd, dev)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_twice(dev, apdev):
|
|
"""WPS provisioning with twice to change passphrase"""
|
|
ssid = "test-wps-twice"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
dev[0].request("DISCONNECT")
|
|
|
|
logger.info("Restart AP with different passphrase and re-run WPS")
|
|
hostapd.remove_bss(apdev[0])
|
|
params['wpa_passphrase'] = 'another passphrase'
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
networks = dev[0].list_networks()
|
|
if len(networks) > 1:
|
|
raise Exception("Unexpected duplicated network block present")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_incorrect_pin(dev, apdev):
|
|
"""WPS PIN provisioning with incorrect PIN"""
|
|
ssid = "test-wps-incorrect-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
logger.info("WPS provisioning attempt 1")
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s 55554444" % apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("WPS operation timed out")
|
|
if "config_error=18" not in ev:
|
|
raise Exception("Incorrect config_error reported")
|
|
if "msg=8" not in ev:
|
|
raise Exception("PIN error detected on incorrect message")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
dev[0].request("WPS_CANCEL")
|
|
# if a scan was in progress, wait for it to complete before trying WPS again
|
|
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
|
|
status = hapd.request("WPS_GET_STATUS")
|
|
if "Last WPS result: Failed" not in status:
|
|
raise Exception("WPS failure result not shown correctly")
|
|
|
|
logger.info("WPS provisioning attempt 2")
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s 12344444" % apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("WPS operation timed out")
|
|
if "config_error=18" not in ev:
|
|
raise Exception("Incorrect config_error reported")
|
|
if "msg=10" not in ev:
|
|
raise Exception("PIN error detected on incorrect message")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_conf_pin(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP"""
|
|
ssid = "test-wps-conf-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" in bss['flags']:
|
|
raise Exception("WPS-AUTH flag not cleared")
|
|
logger.info("Try to connect from another station using the same PIN")
|
|
pin = dev[1].request("WPS_PIN " + apdev[0]['bssid'])
|
|
ev = dev[1].wait_event(["WPS-M2D", "CTRL-EVENT-CONNECTED"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("Operation timed out")
|
|
if "WPS-M2D" not in ev:
|
|
raise Exception("Unexpected WPS operation started")
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[1].wait_connected(timeout=30)
|
|
|
|
def test_ap_wps_conf_pin_mixed_mode(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP (WPA+WPA2)"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-conf-pin-mixed"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "3",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wpa_pairwise": "TKIP"})
|
|
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP' or status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected encryption/key_mgmt configuration: pairwise=%s group=%s key_mgmt=%s" % (status['pairwise_cipher'], status['group_cipher'], status['key_mgmt']))
|
|
|
|
logger.info("WPS provisioning step (auth_types=0x1b)")
|
|
if "OK" not in dev[0].request("SET wps_force_auth_types 0x1b"):
|
|
raise Exception("Failed to set wps_force_auth_types 0x1b")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP' or status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected encryption/key_mgmt configuration: pairwise=%s group=%s key_mgmt=%s" % (status['pairwise_cipher'], status['group_cipher'], status['key_mgmt']))
|
|
|
|
logger.info("WPS provisioning step (auth_types=0 encr_types=0)")
|
|
if "OK" not in dev[0].request("SET wps_force_auth_types 0"):
|
|
raise Exception("Failed to set wps_force_auth_types 0")
|
|
if "OK" not in dev[0].request("SET wps_force_encr_types 0"):
|
|
raise Exception("Failed to set wps_force_encr_types 0")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP' or status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected encryption/key_mgmt configuration: pairwise=%s group=%s key_mgmt=%s" % (status['pairwise_cipher'], status['group_cipher'], status['key_mgmt']))
|
|
|
|
dev[0].request("SET wps_force_auth_types ")
|
|
dev[0].request("SET wps_force_encr_types ")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_conf_pin_v1(dev, apdev):
|
|
"""WPS PIN provisioning with configured WPS v1.0 AP"""
|
|
ssid = "test-wps-conf-pin-v1"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("SET wps_version_number 0x10")
|
|
hapd.request("WPS_PIN any " + pin)
|
|
found = False
|
|
for i in range(0, 10):
|
|
dev[0].scan(freq="2412")
|
|
if "[WPS-PIN]" in dev[0].request("SCAN_RESULTS"):
|
|
found = True
|
|
break
|
|
if not found:
|
|
hapd.request("SET wps_version_number 0x20")
|
|
raise Exception("WPS-PIN flag not seen in scan results")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
hapd.request("SET wps_version_number 0x20")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_conf_pin_2sta(dev, apdev):
|
|
"""Two stations trying to use WPS PIN at the same time"""
|
|
ssid = "test-wps-conf-pin2"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
pin = "12345670"
|
|
pin2 = "55554444"
|
|
hapd.request("WPS_PIN " + dev[0].get_status_field("uuid") + " " + pin)
|
|
hapd.request("WPS_PIN " + dev[1].get_status_field("uuid") + " " + pin)
|
|
dev[0].dump_monitor()
|
|
dev[1].dump_monitor()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[1].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
dev[1].wait_connected(timeout=30)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_conf_pin_timeout(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP timing out PIN"""
|
|
ssid = "test-wps-conf-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
addr = dev[0].p2p_interface_addr()
|
|
pin = dev[0].wps_read_pin()
|
|
if "FAIL" not in hapd.request("WPS_PIN "):
|
|
raise Exception("Unexpected success on invalid WPS_PIN")
|
|
hapd.request("WPS_PIN any " + pin + " 1")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
time.sleep(1.1)
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["WPS-PIN-NEEDED"], timeout=20)
|
|
if ev is None:
|
|
raise Exception("WPS-PIN-NEEDED event timed out")
|
|
ev = dev[0].wait_event(["WPS-M2D"])
|
|
if ev is None:
|
|
raise Exception("M2D not reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
hapd.request("WPS_PIN any " + pin + " 20 " + addr)
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
def test_ap_wps_reg_connect(dev, apdev):
|
|
"""WPS registrar using AP PIN to connect"""
|
|
ssid = "test-wps-reg-ap-pin"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin})
|
|
logger.info("WPS provisioning step")
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
def test_ap_wps_reg_connect_zero_len_ap_pin(dev, apdev):
|
|
"""hostapd with zero length ap_pin parameter"""
|
|
ssid = "test-wps-reg-ap-pin"
|
|
appin = ""
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin})
|
|
logger.info("WPS provisioning step")
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No WPS-FAIL reported")
|
|
if "msg=5 config_error=15" not in ev:
|
|
raise Exception("Unexpected WPS-FAIL: " + ev)
|
|
|
|
def test_ap_wps_reg_connect_mixed_mode(dev, apdev):
|
|
"""WPS registrar using AP PIN to connect (WPA+WPA2)"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-reg-ap-pin"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "3",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wpa_pairwise": "TKIP", "ap_pin": appin})
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
def test_ap_wps_reg_override_ap_settings(dev, apdev):
|
|
"""WPS registrar and ap_settings override"""
|
|
ap_settings = "/tmp/ap_wps_reg_override_ap_settings"
|
|
try:
|
|
os.remove(ap_settings)
|
|
except:
|
|
pass
|
|
# Override AP Settings with values that point to another AP
|
|
data = build_wsc_attr(ATTR_NETWORK_INDEX, b'\x01')
|
|
data += build_wsc_attr(ATTR_SSID, b"test")
|
|
data += build_wsc_attr(ATTR_AUTH_TYPE, b'\x00\x01')
|
|
data += build_wsc_attr(ATTR_ENCR_TYPE, b'\x00\x01')
|
|
data += build_wsc_attr(ATTR_NETWORK_KEY, b'')
|
|
data += build_wsc_attr(ATTR_MAC_ADDR, binascii.unhexlify(apdev[1]['bssid'].replace(':', '')))
|
|
with open(ap_settings, "wb") as f:
|
|
f.write(data)
|
|
ssid = "test-wps-reg-ap-pin"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin, "ap_settings": ap_settings})
|
|
hapd2 = hostapd.add_ap(apdev[1], {"ssid": "test"})
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
ev = hapd2.wait_event(['AP-STA-CONNECTED'], timeout=10)
|
|
os.remove(ap_settings)
|
|
if ev is None:
|
|
raise Exception("No connection with the other AP")
|
|
|
|
def check_wps_reg_failure(dev, ap, appin):
|
|
dev.request("WPS_REG " + ap['bssid'] + " " + appin)
|
|
ev = dev.wait_event(["WPS-SUCCESS", "WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS operation timed out")
|
|
if "WPS-SUCCESS" in ev:
|
|
raise Exception("WPS operation succeeded unexpectedly")
|
|
if "config_error=15" not in ev:
|
|
raise Exception("WPS setup locked state was not reported correctly")
|
|
|
|
def test_ap_wps_random_ap_pin(dev, apdev):
|
|
"""WPS registrar using random AP PIN"""
|
|
ssid = "test-wps-reg-random-ap-pin"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
appin = hapd.request("WPS_AP_PIN random")
|
|
if "FAIL" in appin:
|
|
raise Exception("Could not generate random AP PIN")
|
|
if appin not in hapd.request("WPS_AP_PIN get"):
|
|
raise Exception("Could not fetch current AP PIN")
|
|
logger.info("WPS provisioning step")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
|
|
hapd.request("WPS_AP_PIN disable")
|
|
logger.info("WPS provisioning step with AP PIN disabled")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
check_wps_reg_failure(dev[1], apdev[0], appin)
|
|
|
|
logger.info("WPS provisioning step with AP PIN reset")
|
|
appin = "12345670"
|
|
hapd.request("WPS_AP_PIN set " + appin)
|
|
dev[1].wps_reg(apdev[0]['bssid'], appin)
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[1].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
dev[1].wait_disconnected(timeout=10)
|
|
|
|
logger.info("WPS provisioning step after AP PIN timeout")
|
|
hapd.request("WPS_AP_PIN disable")
|
|
appin = hapd.request("WPS_AP_PIN random 1")
|
|
time.sleep(1.1)
|
|
if "FAIL" not in hapd.request("WPS_AP_PIN get"):
|
|
raise Exception("AP PIN unexpectedly still enabled")
|
|
check_wps_reg_failure(dev[0], apdev[0], appin)
|
|
|
|
logger.info("WPS provisioning step after AP PIN timeout(2)")
|
|
hapd.request("WPS_AP_PIN disable")
|
|
appin = "12345670"
|
|
hapd.request("WPS_AP_PIN set " + appin + " 1")
|
|
time.sleep(1.1)
|
|
if "FAIL" not in hapd.request("WPS_AP_PIN get"):
|
|
raise Exception("AP PIN unexpectedly still enabled")
|
|
check_wps_reg_failure(dev[1], apdev[0], appin)
|
|
|
|
with fail_test(hapd, 1, "os_get_random;wps_generate_pin"):
|
|
hapd.request("WPS_AP_PIN random 1")
|
|
hapd.request("WPS_AP_PIN disable")
|
|
|
|
with alloc_fail(hapd, 1, "upnp_wps_set_ap_pin"):
|
|
hapd.request("WPS_AP_PIN set 12345670")
|
|
hapd.request("WPS_AP_PIN disable")
|
|
|
|
if "FAIL" not in hapd.request("WPS_AP_PIN set"):
|
|
raise Exception("Invalid WPS_AP_PIN accepted")
|
|
if "FAIL" not in hapd.request("WPS_AP_PIN foo"):
|
|
raise Exception("Invalid WPS_AP_PIN accepted")
|
|
|
|
def test_ap_wps_reg_config(dev, apdev):
|
|
"""WPS registrar configuring an AP using AP PIN"""
|
|
ssid = "test-wps-init-ap-pin"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"ap_pin": appin})
|
|
logger.info("WPS configuration step")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
new_ssid = "wps-new-ssid"
|
|
new_passphrase = "1234567890"
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK", "CCMP",
|
|
new_passphrase)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != new_ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
logger.info("Re-configure back to open")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].dump_monitor()
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, "wps-open", "OPEN", "NONE", "")
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != "wps-open":
|
|
raise Exception("Unexpected SSID")
|
|
if status['key_mgmt'] != 'NONE':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
def test_ap_wps_reg_config_ext_processing(dev, apdev):
|
|
"""WPS registrar configuring an AP with external config processing"""
|
|
ssid = "test-wps-init-ap-pin"
|
|
appin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wps_cred_processing": "1", "ap_pin": appin}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
new_ssid = "wps-new-ssid"
|
|
new_passphrase = "1234567890"
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK", "CCMP",
|
|
new_passphrase, no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS registrar operation timed out")
|
|
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS configuration timed out")
|
|
if "1026" not in ev:
|
|
raise Exception("AP Settings missing from event")
|
|
hapd.request("SET wps_cred_processing 0")
|
|
if "FAIL" in hapd.request("WPS_CONFIG " + binascii.hexlify(new_ssid.encode()).decode() + " WPA2PSK CCMP " + binascii.hexlify(new_passphrase.encode()).decode()):
|
|
raise Exception("WPS_CONFIG command failed")
|
|
dev[0].wait_connected(timeout=15)
|
|
|
|
def test_ap_wps_reg_config_tkip(dev, apdev):
|
|
"""WPS registrar configuring AP to use TKIP and AP upgrading to TKIP+CCMP"""
|
|
skip_with_fips(dev[0])
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-init-ap"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"ap_pin": appin})
|
|
logger.info("WPS configuration step")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].request("SET wps_version_number 0x10")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
new_ssid = "wps-new-ssid-with-tkip"
|
|
new_passphrase = "1234567890"
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPAPSK", "TKIP",
|
|
new_passphrase)
|
|
logger.info("Re-connect to verify WPA2 mixed mode")
|
|
dev[0].request("DISCONNECT")
|
|
id = 0
|
|
dev[0].set_network(id, "pairwise", "CCMP")
|
|
dev[0].set_network(id, "proto", "RSN")
|
|
dev[0].connect_network(id)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected: wpa_state={} bssid={}".format(status['wpa_state'], status['bssid']))
|
|
if status['ssid'] != new_ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
def test_ap_wps_setup_locked(dev, apdev):
|
|
"""WPS registrar locking up AP setup on AP PIN failures"""
|
|
ssid = "test-wps-incorrect-ap-pin"
|
|
appin = "12345670"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin})
|
|
new_ssid = "wps-new-ssid-test"
|
|
new_passphrase = "1234567890"
|
|
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
ap_setup_locked = False
|
|
for pin in ["55554444", "1234", "12345678", "00000000", "11111111"]:
|
|
dev[0].dump_monitor()
|
|
logger.info("Try incorrect AP PIN - attempt " + pin)
|
|
dev[0].wps_reg(apdev[0]['bssid'], pin, new_ssid, "WPA2PSK",
|
|
"CCMP", new_passphrase, no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL", "CTRL-EVENT-CONNECTED"])
|
|
if ev is None:
|
|
raise Exception("Timeout on receiving WPS operation failure event")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("Unexpected connection")
|
|
if "config_error=15" in ev:
|
|
logger.info("AP Setup Locked")
|
|
ap_setup_locked = True
|
|
elif "config_error=18" not in ev:
|
|
raise Exception("config_error=18 not reported")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
time.sleep(0.1)
|
|
if not ap_setup_locked:
|
|
raise Exception("AP setup was not locked")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412, force_scan=True,
|
|
only_new=True)
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if 'wps_ap_setup_locked' not in bss or bss['wps_ap_setup_locked'] != '1':
|
|
logger.info("BSS: " + str(bss))
|
|
raise Exception("AP Setup Locked not indicated in scan results")
|
|
|
|
status = hapd.request("WPS_GET_STATUS")
|
|
if "Last WPS result: Failed" not in status:
|
|
raise Exception("WPS failure result not shown correctly")
|
|
if "Peer Address: " + dev[0].p2p_interface_addr() not in status:
|
|
raise Exception("Peer address not shown correctly")
|
|
|
|
time.sleep(0.5)
|
|
dev[0].dump_monitor()
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("WPS success was not reported")
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
appin = hapd.request("WPS_AP_PIN random")
|
|
if "FAIL" in appin:
|
|
raise Exception("Could not generate random AP PIN")
|
|
ev = hapd.wait_event(["WPS-AP-SETUP-UNLOCKED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Failed to unlock AP PIN")
|
|
|
|
def test_ap_wps_setup_locked_timeout(dev, apdev):
|
|
"""WPS re-enabling AP PIN after timeout"""
|
|
ssid = "test-wps-incorrect-ap-pin"
|
|
appin = "12345670"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin})
|
|
new_ssid = "wps-new-ssid-test"
|
|
new_passphrase = "1234567890"
|
|
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
ap_setup_locked = False
|
|
for pin in ["55554444", "1234", "12345678", "00000000", "11111111"]:
|
|
dev[0].dump_monitor()
|
|
logger.info("Try incorrect AP PIN - attempt " + pin)
|
|
dev[0].wps_reg(apdev[0]['bssid'], pin, new_ssid, "WPA2PSK",
|
|
"CCMP", new_passphrase, no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL", "CTRL-EVENT-CONNECTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on receiving WPS operation failure event")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("Unexpected connection")
|
|
if "config_error=15" in ev:
|
|
logger.info("AP Setup Locked")
|
|
ap_setup_locked = True
|
|
break
|
|
elif "config_error=18" not in ev:
|
|
raise Exception("config_error=18 not reported")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
time.sleep(0.1)
|
|
if not ap_setup_locked:
|
|
raise Exception("AP setup was not locked")
|
|
ev = hapd.wait_event(["WPS-AP-SETUP-UNLOCKED"], timeout=80)
|
|
if ev is None:
|
|
raise Exception("AP PIN did not get unlocked on 60 second timeout")
|
|
|
|
def test_ap_wps_setup_locked_2(dev, apdev):
|
|
"""WPS AP configured for special ap_setup_locked=2 mode"""
|
|
ssid = "test-wps-ap-pin"
|
|
appin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin, "ap_setup_locked": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
new_ssid = "wps-new-ssid-test"
|
|
new_passphrase = "1234567890"
|
|
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
hapd.dump_monitor()
|
|
dev[0].dump_monitor()
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK",
|
|
"CCMP", new_passphrase, no_wait=True)
|
|
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("hostapd did not report WPS failure")
|
|
if "msg=12 config_error=15" not in ev:
|
|
raise Exception("Unexpected failure reason (AP): " + ev)
|
|
|
|
ev = dev[0].wait_event(["WPS-FAIL", "CTRL-EVENT-CONNECTED"])
|
|
if ev is None:
|
|
raise Exception("Timeout on receiving WPS operation failure event")
|
|
if "CTRL-EVENT-CONNECTED" in ev:
|
|
raise Exception("Unexpected connection")
|
|
if "config_error=15" not in ev:
|
|
raise Exception("Unexpected failure reason (STA): " + ev)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
|
|
def setup_ap_wps_pbc_overlap_2ap(apdev):
|
|
params = {"ssid": "wps1", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = {"ssid": "wps2", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "123456789", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
hapd.request("WPS_PBC")
|
|
hapd2.request("WPS_PBC")
|
|
return hapd, hapd2
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_pbc_overlap_2ap(dev, apdev):
|
|
"""WPS PBC session overlap with two active APs"""
|
|
hapd, hapd2 = setup_ap_wps_pbc_overlap_2ap(apdev)
|
|
logger.info("WPS provisioning step")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC")
|
|
ev = dev[0].wait_event(["WPS-OVERLAP-DETECTED"], timeout=15)
|
|
hapd.request("DISABLE")
|
|
hapd2.request("DISABLE")
|
|
dev[0].flush_scan_cache()
|
|
if ev is None:
|
|
raise Exception("PBC session overlap not detected")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_pbc_overlap_2ap_specific_bssid(dev, apdev):
|
|
"""WPS PBC session overlap with two active APs (specific BSSID selected)"""
|
|
hapd, hapd2 = setup_ap_wps_pbc_overlap_2ap(apdev)
|
|
logger.info("WPS provisioning step")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-OVERLAP-DETECTED",
|
|
"CTRL-EVENT-CONNECTED"], timeout=15)
|
|
dev[0].request("DISCONNECT")
|
|
hapd.request("DISABLE")
|
|
hapd2.request("DISABLE")
|
|
dev[0].flush_scan_cache()
|
|
if ev is None:
|
|
raise Exception("PBC session overlap result not reported")
|
|
if "CTRL-EVENT-CONNECTED" not in ev:
|
|
raise Exception("Connection did not complete")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_pbc_overlap_2sta(dev, apdev):
|
|
"""WPS PBC session overlap with two active STAs"""
|
|
ssid = "test-wps-pbc-overlap"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[1].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[1].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-M2D"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("PBC session overlap not detected (dev0)")
|
|
if "config_error=12" not in ev:
|
|
raise Exception("PBC session overlap not correctly reported (dev0)")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].request("DISCONNECT")
|
|
ev = dev[1].wait_event(["WPS-M2D"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("PBC session overlap not detected (dev1)")
|
|
if "config_error=12" not in ev:
|
|
raise Exception("PBC session overlap not correctly reported (dev1)")
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[1].request("DISCONNECT")
|
|
hapd.request("WPS_CANCEL")
|
|
ret = hapd.request("WPS_PBC")
|
|
if "FAIL" not in ret:
|
|
raise Exception("PBC mode allowed to be started while PBC overlap still active")
|
|
hapd.request("DISABLE")
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_cancel(dev, apdev):
|
|
"""WPS AP cancelling enabled config method"""
|
|
ssid = "test-wps-ap-cancel"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
bssid = apdev[0]['bssid']
|
|
|
|
logger.info("Verify PBC enable/cancel")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].scan(freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-PBC]" not in bss['flags']:
|
|
raise Exception("WPS-PBC flag missing")
|
|
if "FAIL" in hapd.request("WPS_CANCEL"):
|
|
raise Exception("WPS_CANCEL failed")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].scan(freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-PBC]" in bss['flags']:
|
|
raise Exception("WPS-PBC flag not cleared")
|
|
|
|
logger.info("Verify PIN enable/cancel")
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].scan(freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" not in bss['flags']:
|
|
raise Exception("WPS-AUTH flag missing")
|
|
if "FAIL" in hapd.request("WPS_CANCEL"):
|
|
raise Exception("WPS_CANCEL failed")
|
|
dev[0].scan(freq="2412")
|
|
dev[0].scan(freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" in bss['flags']:
|
|
raise Exception("WPS-AUTH flag not cleared")
|
|
|
|
def test_ap_wps_er_add_enrollee(dev, apdev):
|
|
"""WPS ER configuring AP and adding a new enrollee using PIN"""
|
|
try:
|
|
_test_ap_wps_er_add_enrollee(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_add_enrollee(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
'friendly_name': "WPS AP - <>&'\" - TEST",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
logger.info("WPS configuration step")
|
|
new_passphrase = "1234567890"
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin, ssid, "WPA2PSK", "CCMP",
|
|
new_passphrase)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
if status['ssid'] != ssid:
|
|
raise Exception("Unexpected SSID")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
logger.info("Start ER")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
if "|WPS AP - <>&'" - TEST|Company|" not in ev:
|
|
raise Exception("Expected friendly name not found")
|
|
|
|
logger.info("Learn AP configuration through UPnP")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not in settings")
|
|
if "ssid=" + ssid not in ev:
|
|
raise Exception("Expected SSID not in settings")
|
|
if "key=" + new_passphrase not in ev:
|
|
raise Exception("Expected passphrase not in settings")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
logger.info("Add Enrollee using ER")
|
|
pin = dev[1].wps_read_pin()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_PIN any " + pin + " " + dev[1].p2p_interface_addr())
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("Enrollee did not report success")
|
|
dev[1].wait_connected(timeout=15)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
hwsim_utils.test_connectivity_sta(dev[0], dev[1])
|
|
|
|
logger.info("Add a specific Enrollee using ER")
|
|
pin = dev[2].wps_read_pin()
|
|
addr2 = dev[2].p2p_interface_addr()
|
|
dev[0].dump_monitor()
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].dump_monitor()
|
|
dev[2].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Enrollee not seen")
|
|
if addr2 not in ev:
|
|
raise Exception("Unexpected Enrollee MAC address")
|
|
dev[0].request("WPS_ER_PIN " + addr2 + " " + pin + " " + addr2)
|
|
dev[2].wait_connected(timeout=30)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
logger.info("Verify registrar selection behavior")
|
|
dev[0].request("WPS_ER_PIN any " + pin + " " + dev[1].p2p_interface_addr())
|
|
dev[1].request("DISCONNECT")
|
|
dev[1].wait_disconnected(timeout=10)
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[1].scan(freq="2412")
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" not in bss['flags']:
|
|
# It is possible for scan to miss an update especially when running
|
|
# tests under load with multiple VMs, so allow another attempt.
|
|
dev[1].scan(freq="2412")
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if "[WPS-AUTH]" not in bss['flags']:
|
|
raise Exception("WPS-AUTH flag missing")
|
|
|
|
logger.info("Stop ER")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_STOP")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"])
|
|
if ev is None:
|
|
raise Exception("WPS ER unsubscription timed out")
|
|
# It takes some time for the UPnP UNSUBSCRIBE command to go through, so wait
|
|
# a bit before verifying that the scan results have changed.
|
|
time.sleep(0.2)
|
|
|
|
for i in range(0, 10):
|
|
dev[1].request("BSS_FLUSH 0")
|
|
dev[1].scan(freq="2412", only_new=True)
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
if bss and 'flags' in bss and "[WPS-AUTH]" not in bss['flags']:
|
|
break
|
|
logger.debug("WPS-AUTH flag was still in place - wait a bit longer")
|
|
time.sleep(0.1)
|
|
if "[WPS-AUTH]" in bss['flags']:
|
|
raise Exception("WPS-AUTH flag not removed")
|
|
|
|
def test_ap_wps_er_add_enrollee_uuid(dev, apdev):
|
|
"""WPS ER adding a new enrollee identified by UUID"""
|
|
try:
|
|
_test_ap_wps_er_add_enrollee_uuid(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_add_enrollee_uuid(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
logger.info("WPS configuration step")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
|
|
logger.info("Start ER")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
logger.info("Learn AP configuration through UPnP")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not in settings")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
logger.info("Add a specific Enrollee using ER (PBC/UUID)")
|
|
addr1 = dev[1].p2p_interface_addr()
|
|
dev[0].dump_monitor()
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PBC %s" % apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Enrollee not seen")
|
|
if addr1 not in ev:
|
|
raise Exception("Unexpected Enrollee MAC address")
|
|
uuid = ev.split(' ')[1]
|
|
dev[0].request("WPS_ER_PBC " + uuid)
|
|
dev[1].wait_connected(timeout=30)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
logger.info("Add a specific Enrollee using ER (PIN/UUID)")
|
|
pin = dev[2].wps_read_pin()
|
|
addr2 = dev[2].p2p_interface_addr()
|
|
dev[0].dump_monitor()
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].dump_monitor()
|
|
dev[2].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Enrollee not seen")
|
|
if addr2 not in ev:
|
|
raise Exception("Unexpected Enrollee MAC address")
|
|
uuid = ev.split(' ')[1]
|
|
dev[0].request("WPS_ER_PIN " + uuid + " " + pin)
|
|
dev[2].wait_connected(timeout=30)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-REMOVE"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No Enrollee STA entry timeout seen")
|
|
|
|
logger.info("Stop ER")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_er_multi_add_enrollee(dev, apdev):
|
|
"""Multiple WPS ERs adding a new enrollee using PIN"""
|
|
try:
|
|
_test_ap_wps_er_multi_add_enrollee(dev, apdev)
|
|
finally:
|
|
for i in range(2):
|
|
dev[i].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_multi_add_enrollee(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
'friendly_name': "WPS AP",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
|
|
for i in range(2):
|
|
dev[i].flush_scan_cache()
|
|
dev[i].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[i].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
for i in range(2):
|
|
dev[i].request("WPS_ER_START ifname=lo")
|
|
for i in range(2):
|
|
ev = dev[i].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
dev[i].dump_monitor()
|
|
for i in range(2):
|
|
dev[i].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
for i in range(2):
|
|
ev = dev[i].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
ev = dev[i].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
|
|
time.sleep(0.1)
|
|
|
|
pin = dev[2].wps_read_pin()
|
|
addr = dev[2].own_addr()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_PIN any " + pin + " " + addr)
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_ER_PIN any " + pin + " " + addr)
|
|
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].dump_monitor()
|
|
dev[2].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[2].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("Enrollee did not report success")
|
|
dev[2].wait_connected(timeout=15)
|
|
|
|
def test_ap_wps_er_add_enrollee_pbc(dev, apdev):
|
|
"""WPS ER connected to AP and adding a new enrollee using PBC"""
|
|
try:
|
|
_test_ap_wps_er_add_enrollee_pbc(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_add_enrollee_pbc(dev, apdev):
|
|
ssid = "wps-er-add-enrollee-pbc"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
logger.info("Learn AP configuration")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
|
|
logger.info("Start ER")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
enrollee = dev[1].p2p_interface_addr()
|
|
|
|
if "FAIL-UNKNOWN-UUID" not in dev[0].request("WPS_ER_PBC " + enrollee):
|
|
raise Exception("Unknown UUID not reported")
|
|
|
|
logger.info("Add Enrollee using ER and PBC")
|
|
dev[0].dump_monitor()
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PBC")
|
|
|
|
for i in range(0, 2):
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Enrollee discovery timed out")
|
|
if enrollee in ev:
|
|
break
|
|
if i == 1:
|
|
raise Exception("Expected Enrollee not found")
|
|
if "FAIL-NO-AP-SETTINGS" not in dev[0].request("WPS_ER_PBC " + enrollee):
|
|
raise Exception("Unknown UUID not reported")
|
|
logger.info("Use learned network configuration on ER")
|
|
dev[0].request("WPS_ER_SET_CONFIG " + ap_uuid + " 0")
|
|
if "OK" not in dev[0].request("WPS_ER_PBC " + enrollee):
|
|
raise Exception("WPS_ER_PBC failed")
|
|
|
|
ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Enrollee did not report success")
|
|
dev[1].wait_connected(timeout=15)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
hwsim_utils.test_connectivity_sta(dev[0], dev[1])
|
|
|
|
def test_ap_wps_er_pbc_overlap(dev, apdev):
|
|
"""WPS ER connected to AP and PBC session overlap"""
|
|
try:
|
|
_test_ap_wps_er_pbc_overlap(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_pbc_overlap(dev, apdev):
|
|
ssid = "wps-er-add-enrollee-pbc"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
# avoid leaving dev 1 or 2 as the last Probe Request to the AP
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412, force_scan=True)
|
|
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
# verify BSSID selection of the AP instead of UUID
|
|
if "FAIL" in dev[0].request("WPS_ER_SET_CONFIG " + apdev[0]['bssid'] + " 0"):
|
|
raise Exception("Could not select AP based on BSSID")
|
|
|
|
dev[0].dump_monitor()
|
|
dev[1].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[2].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("PBC scan failed")
|
|
ev = dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("PBC scan failed")
|
|
found1 = False
|
|
found2 = False
|
|
addr1 = dev[1].own_addr()
|
|
addr2 = dev[2].own_addr()
|
|
for i in range(3):
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Enrollee discovery timed out")
|
|
if addr1 in ev:
|
|
found1 = True
|
|
if found2:
|
|
break
|
|
if addr2 in ev:
|
|
found2 = True
|
|
if found1:
|
|
break
|
|
if dev[0].request("WPS_ER_PBC " + ap_uuid) != "FAIL-PBC-OVERLAP\n":
|
|
raise Exception("PBC overlap not reported")
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[2].request("WPS_CANCEL")
|
|
if dev[0].request("WPS_ER_PBC foo") != "FAIL\n":
|
|
raise Exception("Invalid WPS_ER_PBC accepted")
|
|
|
|
def test_ap_wps_er_v10_add_enrollee_pin(dev, apdev):
|
|
"""WPS v1.0 ER connected to AP and adding a new enrollee using PIN"""
|
|
try:
|
|
_test_ap_wps_er_v10_add_enrollee_pin(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_v10_add_enrollee_pin(dev, apdev):
|
|
ssid = "wps-er-add-enrollee-pbc"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
logger.info("Learn AP configuration")
|
|
dev[0].request("SET wps_version_number 0x10")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
|
|
logger.info("Start ER")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
logger.info("Use learned network configuration on ER")
|
|
dev[0].request("WPS_ER_SET_CONFIG " + ap_uuid + " 0")
|
|
|
|
logger.info("Add Enrollee using ER and PIN")
|
|
enrollee = dev[1].p2p_interface_addr()
|
|
pin = dev[1].wps_read_pin()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_PIN any " + pin + " " + enrollee)
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[1].wait_connected(timeout=30)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_config_ap(dev, apdev):
|
|
"""WPS ER configuring AP over UPnP"""
|
|
try:
|
|
_test_ap_wps_er_config_ap(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_config_ap(dev, apdev):
|
|
ssid = "wps-er-ap-config"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
|
|
logger.info("Connect ER to the AP")
|
|
dev[0].connect(ssid, psk="12345678", scan_freq="2412")
|
|
|
|
logger.info("WPS configuration step")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
new_passphrase = "1234567890"
|
|
dev[0].request("WPS_ER_CONFIG " + apdev[0]['bssid'] + " " + ap_pin + " " +
|
|
binascii.hexlify(ssid.encode()).decode() + " WPA2PSK CCMP " +
|
|
binascii.hexlify(new_passphrase.encode()).decode())
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"])
|
|
if ev is None:
|
|
raise Exception("WPS ER configuration operation timed out")
|
|
dev[0].wait_disconnected(timeout=10)
|
|
dev[0].connect(ssid, psk="1234567890", scan_freq="2412")
|
|
|
|
logger.info("WPS ER restart")
|
|
dev[0].request("WPS_ER_START")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out on ER restart")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found on ER restart")
|
|
if "OK" not in dev[0].request("WPS_ER_STOP"):
|
|
raise Exception("WPS_ER_STOP failed")
|
|
if "OK" not in dev[0].request("WPS_ER_STOP"):
|
|
raise Exception("WPS_ER_STOP failed")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_cache_ap_settings(dev, apdev):
|
|
"""WPS ER caching AP settings"""
|
|
try:
|
|
_test_ap_wps_er_cache_ap_settings(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_cache_ap_settings(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
id = int(dev[0].list_networks()[0]['id'])
|
|
dev[0].set_network(id, "scan_freq", "2412")
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
hapd.disable()
|
|
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE", "CTRL-EVENT-DISCONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP removal or disconnection timed out")
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD", "CTRL-EVENT-CONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery or connection timed out")
|
|
|
|
pin = dev[1].wps_read_pin()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_PIN any " + pin + " " + dev[1].p2p_interface_addr())
|
|
|
|
time.sleep(0.2)
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("Enrollee did not report success")
|
|
dev[1].wait_connected(timeout=15)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_er_cache_ap_settings_oom(dev, apdev):
|
|
"""WPS ER caching AP settings (OOM)"""
|
|
try:
|
|
_test_ap_wps_er_cache_ap_settings_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_cache_ap_settings_oom(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
id = int(dev[0].list_networks()[0]['id'])
|
|
dev[0].set_network(id, "scan_freq", "2412")
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
with alloc_fail(dev[0], 1, "=wps_er_ap_use_cached_settings"):
|
|
hapd.disable()
|
|
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE",
|
|
"CTRL-EVENT-DISCONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP removal or disconnection timed out")
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD", "CTRL-EVENT-CONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery or connection timed out")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_er_cache_ap_settings_oom2(dev, apdev):
|
|
"""WPS ER caching AP settings (OOM 2)"""
|
|
try:
|
|
_test_ap_wps_er_cache_ap_settings_oom2(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_cache_ap_settings_oom2(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
id = int(dev[0].list_networks()[0]['id'])
|
|
dev[0].set_network(id, "scan_freq", "2412")
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
with alloc_fail(dev[0], 1, "=wps_er_ap_cache_settings"):
|
|
hapd.disable()
|
|
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE",
|
|
"CTRL-EVENT-DISCONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP removal or disconnection timed out")
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD", "CTRL-EVENT-CONNECTED"],
|
|
timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery or connection timed out")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_er_subscribe_oom(dev, apdev):
|
|
"""WPS ER subscribe OOM"""
|
|
try:
|
|
_test_ap_wps_er_subscribe_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_subscribe_oom(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
id = int(dev[0].list_networks()[0]['id'])
|
|
dev[0].set_network(id, "scan_freq", "2412")
|
|
|
|
with alloc_fail(dev[0], 1, "http_client_addr;wps_er_subscribe"):
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
for i in range(50):
|
|
res = dev[0].request("GET_ALLOC_FAIL")
|
|
if res.startswith("0:"):
|
|
break
|
|
time.sleep(0.1)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=0)
|
|
if ev:
|
|
raise Exception("Unexpected AP discovery during OOM")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_er_set_sel_reg_oom(dev, apdev):
|
|
"""WPS ER SetSelectedRegistrar OOM"""
|
|
try:
|
|
_test_ap_wps_er_set_sel_reg_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_set_sel_reg_oom(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("AP not discovered")
|
|
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL timed out")
|
|
time.sleep(0.1)
|
|
|
|
for func in ["http_client_url_parse;wps_er_send_set_sel_reg",
|
|
"wps_er_soap_hdr;wps_er_send_set_sel_reg",
|
|
"http_client_addr;wps_er_send_set_sel_reg",
|
|
"wpabuf_alloc;wps_er_set_sel_reg"]:
|
|
with alloc_fail(dev[0], 1, func):
|
|
if "OK" not in dev[0].request("WPS_ER_PBC " + ap_uuid):
|
|
raise Exception("WPS_ER_PBC failed")
|
|
ev = dev[0].wait_event(["WPS-PBC-ACTIVE"], timeout=3)
|
|
if ev is None:
|
|
raise Exception("WPS-PBC-ACTIVE not seen")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_learn_oom(dev, apdev):
|
|
"""WPS ER learn OOM"""
|
|
try:
|
|
_test_ap_wps_er_learn_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_learn_oom(dev, apdev):
|
|
ssid = "wps-er-add-enrollee"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], ap_pin)
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("AP not discovered")
|
|
|
|
for func in ["wps_er_http_put_message_cb",
|
|
"xml_get_base64_item;wps_er_http_put_message_cb",
|
|
"http_client_url_parse;wps_er_ap_put_message",
|
|
"wps_er_soap_hdr;wps_er_ap_put_message",
|
|
"http_client_addr;wps_er_ap_put_message"]:
|
|
with alloc_fail(dev[0], 1, func):
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=1)
|
|
if ev is not None:
|
|
raise Exception("AP learn succeeded during OOM")
|
|
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("AP learn did not succeed")
|
|
|
|
if "FAIL" not in dev[0].request("WPS_ER_LEARN 00000000-9e5c-4e73-bd82-f89cbcd10d7e " + ap_pin):
|
|
raise Exception("WPS_ER_LEARN for unknown AP accepted")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def test_ap_wps_fragmentation(dev, apdev):
|
|
"""WPS with fragmentation in EAP-WSC and mixed mode WPA+WPA2"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-fragmentation"
|
|
appin = "12345670"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "3",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wpa_pairwise": "TKIP", "ap_pin": appin,
|
|
"fragment_size": "50"})
|
|
logger.info("WPS provisioning step (PBC)")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
dev[0].request("SET wps_fragment_size 50")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED':
|
|
raise Exception("Not fully connected")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
logger.info("WPS provisioning step (PIN)")
|
|
pin = dev[1].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].request("SET wps_fragment_size 50")
|
|
dev[1].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[1].wait_connected(timeout=30)
|
|
status = dev[1].get_status()
|
|
if status['wpa_state'] != 'COMPLETED':
|
|
raise Exception("Not fully connected")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
logger.info("WPS connection as registrar")
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].request("SET wps_fragment_size 50")
|
|
dev[2].wps_reg(apdev[0]['bssid'], appin)
|
|
status = dev[2].get_status()
|
|
if status['wpa_state'] != 'COMPLETED':
|
|
raise Exception("Not fully connected")
|
|
if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'TKIP':
|
|
raise Exception("Unexpected encryption configuration")
|
|
if status['key_mgmt'] != 'WPA2-PSK':
|
|
raise Exception("Unexpected key_mgmt")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_new_version_sta(dev, apdev):
|
|
"""WPS compatibility with new version number on the station"""
|
|
ssid = "test-wps-ver"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("SET wps_version_number 0x43")
|
|
dev[0].request("SET wps_vendor_ext_m1 000137100100020001")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_new_version_ap(dev, apdev):
|
|
"""WPS compatibility with new version number on the AP"""
|
|
ssid = "test-wps-ver"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
if "FAIL" in hapd.request("SET wps_version_number 0x43"):
|
|
raise Exception("Failed to enable test functionality")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
hapd.request("SET wps_version_number 0x20")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_check_pin(dev, apdev):
|
|
"""Verify PIN checking through control interface"""
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": "wps", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
for t in [("12345670", "12345670"),
|
|
("12345678", "FAIL-CHECKSUM"),
|
|
("12345", "FAIL"),
|
|
("123456789", "FAIL"),
|
|
("1234-5670", "12345670"),
|
|
("1234 5670", "12345670"),
|
|
("1-2.3:4 5670", "12345670")]:
|
|
res = hapd.request("WPS_CHECK_PIN " + t[0]).rstrip('\n')
|
|
res2 = dev[0].request("WPS_CHECK_PIN " + t[0]).rstrip('\n')
|
|
if res != res2:
|
|
raise Exception("Unexpected difference in WPS_CHECK_PIN responses")
|
|
if res != t[1]:
|
|
raise Exception("Incorrect WPS_CHECK_PIN response {} (expected {})".format(res, t[1]))
|
|
|
|
if "FAIL" not in hapd.request("WPS_CHECK_PIN 12345"):
|
|
raise Exception("Unexpected WPS_CHECK_PIN success")
|
|
if "FAIL" not in hapd.request("WPS_CHECK_PIN 123456789"):
|
|
raise Exception("Unexpected WPS_CHECK_PIN success")
|
|
|
|
for i in range(0, 10):
|
|
pin = dev[0].request("WPS_PIN get")
|
|
rpin = dev[0].request("WPS_CHECK_PIN " + pin).rstrip('\n')
|
|
if pin != rpin:
|
|
raise Exception("Random PIN validation failed for " + pin)
|
|
|
|
def test_ap_wps_pin_get_failure(dev, apdev):
|
|
"""PIN generation failure"""
|
|
with fail_test(dev[0], 1,
|
|
"os_get_random;wpa_supplicant_ctrl_iface_wps_pin"):
|
|
if "FAIL" not in dev[0].request("WPS_PIN get"):
|
|
raise Exception("WPS_PIN did not report failure")
|
|
|
|
def test_ap_wps_wep_config(dev, apdev):
|
|
"""WPS 2.0 AP rejecting WEP configuration"""
|
|
ssid = "test-wps-config"
|
|
appin = "12345670"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"ap_pin": appin})
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, "wps-new-ssid-wep", "OPEN", "WEP",
|
|
"hello", no_wait=True)
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL timed out")
|
|
if "reason=2" not in ev:
|
|
raise Exception("Unexpected reason code in WPS-FAIL")
|
|
status = hapd.request("WPS_GET_STATUS")
|
|
if "Last WPS result: Failed" not in status:
|
|
raise Exception("WPS failure result not shown correctly")
|
|
if "Failure Reason: WEP Prohibited" not in status:
|
|
raise Exception("Failure reason not reported correctly")
|
|
if "Peer Address: " + dev[0].p2p_interface_addr() not in status:
|
|
raise Exception("Peer address not shown correctly")
|
|
|
|
def test_ap_wps_wep_enroll(dev, apdev):
|
|
"""WPS 2.0 STA rejecting WEP configuration"""
|
|
ssid = "test-wps-wep"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"skip_cred_build": "1", "extra_cred": "wps-wep-cred"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL event timed out")
|
|
if "msg=12" not in ev or "reason=2 (WEP Prohibited)" not in ev:
|
|
raise Exception("Unexpected WPS-FAIL event: " + ev)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_ie_fragmentation(dev, apdev):
|
|
"""WPS AP using fragmented WPS IE"""
|
|
ssid = "test-wps-ie-fragmentation"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "1234567890abcdef1234567890abcdef",
|
|
"manufacturer": "1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef",
|
|
"model_name": "1234567890abcdef1234567890abcdef",
|
|
"model_number": "1234567890abcdef1234567890abcdef",
|
|
"serial_number": "1234567890abcdef1234567890abcdef"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if "wps_device_name" not in bss or bss['wps_device_name'] != "1234567890abcdef1234567890abcdef":
|
|
logger.info("Device Name not received correctly")
|
|
logger.info(bss)
|
|
# This can fail if Probe Response frame is missed and Beacon frame was
|
|
# used to fill in the BSS entry. This can happen, e.g., during heavy
|
|
# load every now and then and is not really an error, so try to
|
|
# workaround by runnign another scan.
|
|
dev[0].scan(freq="2412", only_new=True)
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
if not bss or "wps_device_name" not in bss or bss['wps_device_name'] != "1234567890abcdef1234567890abcdef":
|
|
logger.info(bss)
|
|
raise Exception("Device Name not received correctly")
|
|
if len(re.findall("dd..0050f204", bss['ie'])) != 2:
|
|
raise Exception("Unexpected number of WPS IEs")
|
|
|
|
def get_psk(pskfile):
|
|
psks = {}
|
|
with open(pskfile, "r") as f:
|
|
lines = f.read().splitlines()
|
|
for l in lines:
|
|
if l == "# WPA PSKs":
|
|
continue
|
|
vals = l.split(' ')
|
|
if len(vals) != 3 or vals[0] != "wps=1":
|
|
continue
|
|
addr = vals[1]
|
|
psk = vals[2]
|
|
psks[addr] = psk
|
|
return psks
|
|
|
|
def test_ap_wps_per_station_psk(dev, apdev):
|
|
"""WPS PBC provisioning with per-station PSK"""
|
|
addr0 = dev[0].own_addr()
|
|
addr1 = dev[1].own_addr()
|
|
addr2 = dev[2].own_addr()
|
|
ssid = "wps"
|
|
appin = "12345670"
|
|
pskfile = "/tmp/ap_wps_per_enrollee_psk.psk_file"
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
hapd = None
|
|
try:
|
|
with open(pskfile, "w") as f:
|
|
f.write("# WPA PSKs\n")
|
|
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa": "2", "wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": "CCMP", "ap_pin": appin,
|
|
"wpa_psk_file": pskfile}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
logger.info("First enrollee")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
logger.info("Second enrollee")
|
|
hapd.request("WPS_PBC")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[1].wait_connected(timeout=30)
|
|
|
|
logger.info("External registrar")
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].wps_reg(apdev[0]['bssid'], appin)
|
|
|
|
logger.info("Verifying PSK results")
|
|
psks = get_psk(pskfile)
|
|
if addr0 not in psks:
|
|
raise Exception("No PSK recorded for sta0")
|
|
if addr1 not in psks:
|
|
raise Exception("No PSK recorded for sta1")
|
|
if addr2 not in psks:
|
|
raise Exception("No PSK recorded for sta2")
|
|
if psks[addr0] == psks[addr1]:
|
|
raise Exception("Same PSK recorded for sta0 and sta1")
|
|
if psks[addr0] == psks[addr2]:
|
|
raise Exception("Same PSK recorded for sta0 and sta2")
|
|
if psks[addr1] == psks[addr2]:
|
|
raise Exception("Same PSK recorded for sta1 and sta2")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
logger.info("Second external registrar")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin)
|
|
psks2 = get_psk(pskfile)
|
|
if addr0 not in psks2:
|
|
raise Exception("No PSK recorded for sta0(reg)")
|
|
if psks[addr0] == psks2[addr0]:
|
|
raise Exception("Same PSK recorded for sta0(enrollee) and sta0(reg)")
|
|
finally:
|
|
os.remove(pskfile)
|
|
if hapd:
|
|
dev[0].request("DISCONNECT")
|
|
dev[1].request("DISCONNECT")
|
|
dev[2].request("DISCONNECT")
|
|
hapd.disable()
|
|
dev[0].flush_scan_cache()
|
|
dev[1].flush_scan_cache()
|
|
dev[2].flush_scan_cache()
|
|
|
|
def test_ap_wps_per_station_psk_preset(dev, apdev):
|
|
"""WPS PIN provisioning with per-station PSK preset"""
|
|
addr0 = dev[0].own_addr()
|
|
addr1 = dev[1].own_addr()
|
|
addr2 = dev[2].own_addr()
|
|
ssid = "wps"
|
|
appin = "12345670"
|
|
pskfile = "/tmp/ap_wps_per_enrollee_psk_preset.psk_file"
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
hapd = None
|
|
try:
|
|
with open(pskfile, "w") as f:
|
|
f.write("# WPA PSKs\n")
|
|
f.write("wps=1 " + addr0 + " preset-passphrase-0\n")
|
|
f.write("wps=1 " + addr2 + " preset-passphrase-2\n")
|
|
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa": "2", "wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": "CCMP", "ap_pin": appin,
|
|
"wpa_psk_file": pskfile}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
logger.info("First enrollee")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(bssid, freq=2412)
|
|
dev[0].request("WPS_PIN %s %s" % (bssid, pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
logger.info("Second enrollee")
|
|
pin = dev[1].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[1].scan_for_bss(bssid, freq=2412)
|
|
dev[1].request("WPS_PIN %s %s" % (bssid, pin))
|
|
dev[1].wait_connected(timeout=30)
|
|
|
|
logger.info("External registrar")
|
|
dev[2].scan_for_bss(bssid, freq=2412)
|
|
dev[2].wps_reg(bssid, appin)
|
|
|
|
logger.info("Verifying PSK results")
|
|
psks = get_psk(pskfile)
|
|
if addr0 not in psks:
|
|
raise Exception("No PSK recorded for sta0")
|
|
if addr1 not in psks:
|
|
raise Exception("No PSK recorded for sta1")
|
|
if addr2 not in psks:
|
|
raise Exception("No PSK recorded for sta2")
|
|
logger.info("PSK[0]: " + psks[addr0])
|
|
logger.info("PSK[1]: " + psks[addr1])
|
|
logger.info("PSK[2]: " + psks[addr2])
|
|
if psks[addr0] == psks[addr1]:
|
|
raise Exception("Same PSK recorded for sta0 and sta1")
|
|
if psks[addr0] == psks[addr2]:
|
|
raise Exception("Same PSK recorded for sta0 and sta2")
|
|
if psks[addr1] == psks[addr2]:
|
|
raise Exception("Same PSK recorded for sta1 and sta2")
|
|
pmk0 = hapd.request("GET_PMK " + addr0)
|
|
pmk1 = hapd.request("GET_PMK " + addr1)
|
|
pmk2 = hapd.request("GET_PMK " + addr2)
|
|
logger.info("PMK[0]: " + pmk0)
|
|
logger.info("PMK[1]: " + pmk1)
|
|
logger.info("PMK[2]: " + pmk2)
|
|
if pmk0 != "565faec21ff04702d9d17c464e1301efd36c8a3ea46bb866b4bec7fed4384579":
|
|
raise Exception("PSK[0] mismatch")
|
|
if psks[addr1] != pmk1:
|
|
raise Exception("PSK[1] mismatch")
|
|
if psks[addr2] != pmk2:
|
|
raise Exception("PSK[2] mismatch")
|
|
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
dev[0].dump_monitor()
|
|
logger.info("First enrollee again")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(bssid, freq=2412)
|
|
dev[0].request("WPS_PIN %s %s" % (bssid, pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
psks2 = get_psk(pskfile)
|
|
if addr0 not in psks2:
|
|
raise Exception("No PSK recorded for sta0 (2)")
|
|
if psks[addr0] != psks2[addr0]:
|
|
raise Exception("Different PSK recorded for sta0(enrollee) and sta0(enrollee 2)")
|
|
finally:
|
|
os.remove(pskfile)
|
|
|
|
def test_ap_wps_per_station_psk_failure(dev, apdev):
|
|
"""WPS PBC provisioning with per-station PSK (file not writable)"""
|
|
addr0 = dev[0].p2p_dev_addr()
|
|
addr1 = dev[1].p2p_dev_addr()
|
|
addr2 = dev[2].p2p_dev_addr()
|
|
ssid = "wps"
|
|
appin = "12345670"
|
|
pskfile = "/tmp/ap_wps_per_enrollee_psk.psk_file"
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
hapd = None
|
|
try:
|
|
with open(pskfile, "w") as f:
|
|
f.write("# WPA PSKs\n")
|
|
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa": "2", "wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": "CCMP", "ap_pin": appin,
|
|
"wpa_psk_file": pskfile}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
if "FAIL" in hapd.request("SET wpa_psk_file /tmp/does/not/exists/ap_wps_per_enrollee_psk_failure.psk_file"):
|
|
raise Exception("Failed to set wpa_psk_file")
|
|
|
|
logger.info("First enrollee")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
logger.info("Second enrollee")
|
|
hapd.request("WPS_PBC")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[1].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[1].wait_connected(timeout=30)
|
|
|
|
logger.info("External registrar")
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].wps_reg(apdev[0]['bssid'], appin)
|
|
|
|
logger.info("Verifying PSK results")
|
|
psks = get_psk(pskfile)
|
|
if len(psks) > 0:
|
|
raise Exception("PSK recorded unexpectedly")
|
|
finally:
|
|
if hapd:
|
|
for i in range(3):
|
|
dev[i].request("DISCONNECT")
|
|
hapd.disable()
|
|
for i in range(3):
|
|
dev[i].flush_scan_cache()
|
|
os.remove(pskfile)
|
|
|
|
def test_ap_wps_pin_request_file(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP"""
|
|
ssid = "wps"
|
|
pinfile = "/tmp/ap_wps_pin_request_file.log"
|
|
if os.path.exists(pinfile):
|
|
os.remove(pinfile)
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wps_pin_requests": pinfile,
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
uuid = dev[0].get_status_field("uuid")
|
|
pin = dev[0].wps_read_pin()
|
|
try:
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["WPS-PIN-NEEDED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("PIN needed event not shown")
|
|
if uuid not in ev:
|
|
raise Exception("UUID mismatch")
|
|
dev[0].request("WPS_CANCEL")
|
|
success = False
|
|
with open(pinfile, "r") as f:
|
|
lines = f.readlines()
|
|
for l in lines:
|
|
if uuid in l:
|
|
success = True
|
|
break
|
|
if not success:
|
|
raise Exception("PIN request entry not in the log file")
|
|
finally:
|
|
try:
|
|
os.remove(pinfile)
|
|
except:
|
|
pass
|
|
|
|
def test_ap_wps_auto_setup_with_config_file(dev, apdev):
|
|
"""WPS auto-setup with configuration file"""
|
|
skip_without_tkip(dev[0])
|
|
conffile = "/tmp/ap_wps_auto_setup_with_config_file.conf"
|
|
ifname = apdev[0]['ifname']
|
|
try:
|
|
with open(conffile, "w") as f:
|
|
f.write("driver=nl80211\n")
|
|
f.write("hw_mode=g\n")
|
|
f.write("channel=1\n")
|
|
f.write("ieee80211n=1\n")
|
|
f.write("interface=%s\n" % ifname)
|
|
f.write("ctrl_interface=/var/run/hostapd\n")
|
|
f.write("ssid=wps\n")
|
|
f.write("eap_server=1\n")
|
|
f.write("wps_state=1\n")
|
|
hapd = hostapd.add_bss(apdev[0], ifname, conffile)
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
with open(conffile, "r") as f:
|
|
lines = f.read().splitlines()
|
|
vals = dict()
|
|
for l in lines:
|
|
try:
|
|
[name, value] = l.split('=', 1)
|
|
vals[name] = value
|
|
except ValueError as e:
|
|
if "# WPS configuration" in l:
|
|
pass
|
|
else:
|
|
raise Exception("Unexpected configuration line: " + l)
|
|
if vals['ieee80211n'] != '1' or vals['wps_state'] != '2' or "WPA-PSK" not in vals['wpa_key_mgmt']:
|
|
raise Exception("Incorrect configuration: " + str(vals))
|
|
finally:
|
|
try:
|
|
os.remove(conffile)
|
|
except:
|
|
pass
|
|
|
|
def test_ap_wps_pbc_timeout(dev, apdev, params):
|
|
"""wpa_supplicant PBC walk time and WPS ER SelReg timeout [long]"""
|
|
if not params['long']:
|
|
raise HwsimSkip("Skip test case with long duration due to --long not specified")
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
urls = upnp_get_urls(location)
|
|
eventurl = urlparse(urls['event_sub_url'])
|
|
ctrlurl = urlparse(urls['control_url'])
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
|
|
class WPSERHTTPServer(StreamRequestHandler):
|
|
def handle(self):
|
|
data = self.rfile.readline().strip()
|
|
logger.debug(data)
|
|
self.wfile.write(gen_wps_event())
|
|
|
|
server = MyTCPServer(("127.0.0.1", 12345), WPSERHTTPServer)
|
|
server.timeout = 1
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
msg = '''<?xml version="1.0"?>
|
|
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
|
|
<s:Body>
|
|
<u:SetSelectedRegistrar xmlns:u="urn:schemas-wifialliance-org:service:WFAWLANConfig:1">
|
|
<NewMessage>EEoAARAQQQABARASAAIAABBTAAIxSBBJAA4ANyoAASABBv///////xBIABA2LbR7pTpRkYj7
|
|
VFi5hrLk
|
|
</NewMessage>
|
|
</u:SetSelectedRegistrar>
|
|
</s:Body>
|
|
</s:Envelope>'''
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"'}
|
|
headers["SOAPAction"] = '"urn:schemas-wifialliance-org:service:WFAWLANConfig:1#%s"' % "SetSelectedRegistrar"
|
|
conn.request("POST", ctrlurl.path, msg, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
server.handle_request()
|
|
|
|
logger.info("Start WPS_PBC and wait for PBC walk time expiration")
|
|
if "OK" not in dev[0].request("WPS_PBC"):
|
|
raise Exception("WPS_PBC failed")
|
|
|
|
start = os.times()[4]
|
|
|
|
server.handle_request()
|
|
dev[1].request("BSS_FLUSH 0")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True,
|
|
only_new=True)
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
logger.debug("BSS: " + str(bss))
|
|
if '[WPS-AUTH]' not in bss['flags']:
|
|
raise Exception("WPS not indicated authorized")
|
|
|
|
server.handle_request()
|
|
|
|
wps_timeout_seen = False
|
|
|
|
while True:
|
|
hapd.dump_monitor()
|
|
dev[1].dump_monitor()
|
|
if not wps_timeout_seen:
|
|
ev = dev[0].wait_event(["WPS-TIMEOUT"], timeout=0)
|
|
if ev is not None:
|
|
logger.info("PBC timeout seen")
|
|
wps_timeout_seen = True
|
|
else:
|
|
dev[0].dump_monitor()
|
|
now = os.times()[4]
|
|
if now - start > 130:
|
|
raise Exception("Selected registration information not removed")
|
|
dev[1].request("BSS_FLUSH 0")
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True,
|
|
only_new=True)
|
|
bss = dev[1].get_bss(apdev[0]['bssid'])
|
|
logger.debug("BSS: " + str(bss))
|
|
if '[WPS-AUTH]' not in bss['flags']:
|
|
break
|
|
server.handle_request()
|
|
|
|
server.server_close()
|
|
|
|
if wps_timeout_seen:
|
|
return
|
|
|
|
now = os.times()[4]
|
|
if now < start + 150:
|
|
dur = start + 150 - now
|
|
else:
|
|
dur = 1
|
|
logger.info("Continue waiting for PBC timeout (%d sec)" % dur)
|
|
ev = dev[0].wait_event(["WPS-TIMEOUT"], timeout=dur)
|
|
if ev is None:
|
|
raise Exception("WPS-TIMEOUT not reported")
|
|
|
|
def add_ssdp_ap(ap, ap_uuid):
|
|
ssid = "wps-ssdp"
|
|
ap_pin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo",
|
|
"friendly_name": "WPS Access Point",
|
|
"manufacturer_url": "http://www.example.com/",
|
|
"model_description": "Wireless Access Point",
|
|
"model_url": "http://www.example.com/model/",
|
|
"upc": "123456789012"}
|
|
return hostapd.add_ap(ap, params)
|
|
|
|
def ssdp_send(msg, no_recv=False):
|
|
socket.setdefaulttimeout(1)
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
|
|
sock.bind(("127.0.0.1", 0))
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
if no_recv:
|
|
return None
|
|
return sock.recv(1000).decode()
|
|
|
|
def ssdp_send_msearch(st, no_recv=False):
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX: 1',
|
|
'MAN: "ssdp:discover"',
|
|
'ST: ' + st,
|
|
'', ''])
|
|
return ssdp_send(msg, no_recv=no_recv)
|
|
|
|
def test_ap_wps_ssdp_msearch(dev, apdev):
|
|
"""WPS AP and SSDP M-SEARCH messages"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'Host: 239.255.255.250:1900',
|
|
'Mx: 1',
|
|
'Man: "ssdp:discover"',
|
|
'St: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
ssdp_send(msg)
|
|
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'host:\t239.255.255.250:1900\t\t\t\t \t\t',
|
|
'mx: \t1\t\t ',
|
|
'man: \t \t "ssdp:discover" ',
|
|
'st: urn:schemas-wifialliance-org:device:WFADevice:1\t\t',
|
|
'', ''])
|
|
ssdp_send(msg)
|
|
|
|
ssdp_send_msearch("ssdp:all")
|
|
ssdp_send_msearch("upnp:rootdevice")
|
|
ssdp_send_msearch("uuid:" + ap_uuid)
|
|
ssdp_send_msearch("urn:schemas-wifialliance-org:service:WFAWLANConfig:1")
|
|
ssdp_send_msearch("urn:schemas-wifialliance-org:device:WFADevice:1")
|
|
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST:\t239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 130',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
ssdp_send(msg, no_recv=True)
|
|
|
|
def test_ap_wps_ssdp_invalid_msearch(dev, apdev):
|
|
"""WPS AP and invalid SSDP M-SEARCH messages"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
socket.setdefaulttimeout(1)
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
|
|
sock.bind(("127.0.0.1", 0))
|
|
|
|
logger.debug("Missing MX")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Negative MX")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX: -1',
|
|
'MAN: "ssdp:discover"',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Invalid MX")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX; 1',
|
|
'MAN: "ssdp:discover"',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Missing MAN")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Invalid MAN")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX: 1',
|
|
'MAN: foo',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MX: 1',
|
|
'MAN; "ssdp:discover"',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Missing HOST")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Missing ST")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Mismatching ST")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: uuid:16d5f8a9-4ee4-4f5e-81f9-cc6e2f47f42d',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: foo:bar',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: foobar',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Invalid ST")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST; urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Invalid M-SEARCH")
|
|
msg = '\r\n'.join([
|
|
'M+SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH-* HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
logger.debug("Invalid message format")
|
|
sock.sendto(b"NOTIFY * HTTP/1.1", ("239.255.255.250", 1900))
|
|
msg = '\r'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
try:
|
|
r = sock.recv(1000)
|
|
raise Exception("Unexpected M-SEARCH response: " + r)
|
|
except socket.timeout:
|
|
pass
|
|
|
|
logger.debug("Valid M-SEARCH")
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
|
|
try:
|
|
r = sock.recv(1000)
|
|
pass
|
|
except socket.timeout:
|
|
raise Exception("No SSDP response")
|
|
|
|
def test_ap_wps_ssdp_burst(dev, apdev):
|
|
"""WPS AP and SSDP burst"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
msg = '\r\n'.join([
|
|
'M-SEARCH * HTTP/1.1',
|
|
'HOST: 239.255.255.250:1900',
|
|
'MAN: "ssdp:discover"',
|
|
'MX: 1',
|
|
'ST: urn:schemas-wifialliance-org:device:WFADevice:1',
|
|
'', ''])
|
|
socket.setdefaulttimeout(1)
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
|
|
sock.bind(("127.0.0.1", 0))
|
|
for i in range(0, 25):
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
resp = 0
|
|
while True:
|
|
try:
|
|
r = sock.recv(1000).decode()
|
|
if not r.startswith("HTTP/1.1 200 OK\r\n"):
|
|
raise Exception("Unexpected message: " + r)
|
|
resp += 1
|
|
except socket.timeout:
|
|
break
|
|
if resp < 20:
|
|
raise Exception("Too few SSDP responses")
|
|
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
|
|
sock.bind(("127.0.0.1", 0))
|
|
for i in range(0, 25):
|
|
sock.sendto(msg.encode(), ("239.255.255.250", 1900))
|
|
while True:
|
|
try:
|
|
r = sock.recv(1000).decode()
|
|
if ap_uuid in r:
|
|
break
|
|
except socket.timeout:
|
|
raise Exception("No SSDP response")
|
|
|
|
def ssdp_get_location(uuid):
|
|
res = ssdp_send_msearch("uuid:" + uuid)
|
|
location = None
|
|
for l in res.splitlines():
|
|
if l.lower().startswith("location:"):
|
|
location = l.split(':', 1)[1].strip()
|
|
break
|
|
if location is None:
|
|
raise Exception("No UPnP location found")
|
|
return location
|
|
|
|
def upnp_get_urls(location):
|
|
if sys.version_info[0] > 2:
|
|
conn = urlopen(location)
|
|
else:
|
|
conn = urlopen(location, proxies={})
|
|
tree = ET.parse(conn)
|
|
root = tree.getroot()
|
|
urn = '{urn:schemas-upnp-org:device-1-0}'
|
|
service = root.find("./" + urn + "device/" + urn + "serviceList/" + urn + "service")
|
|
res = {}
|
|
res['scpd_url'] = urljoin(location, service.find(urn + 'SCPDURL').text)
|
|
res['control_url'] = urljoin(location,
|
|
service.find(urn + 'controlURL').text)
|
|
res['event_sub_url'] = urljoin(location,
|
|
service.find(urn + 'eventSubURL').text)
|
|
return res
|
|
|
|
def upnp_soap_action(conn, path, action, include_soap_action=True,
|
|
soap_action_override=None, newmsg=None, neweventtype=None,
|
|
neweventmac=None):
|
|
soapns = 'http://schemas.xmlsoap.org/soap/envelope/'
|
|
wpsns = 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1'
|
|
ET.register_namespace('soapenv', soapns)
|
|
ET.register_namespace('wfa', wpsns)
|
|
attrib = {}
|
|
attrib['{%s}encodingStyle' % soapns] = 'http://schemas.xmlsoap.org/soap/encoding/'
|
|
root = ET.Element("{%s}Envelope" % soapns, attrib=attrib)
|
|
body = ET.SubElement(root, "{%s}Body" % soapns)
|
|
act = ET.SubElement(body, "{%s}%s" % (wpsns, action))
|
|
if newmsg:
|
|
msg = ET.SubElement(act, "NewMessage")
|
|
msg.text = base64.b64encode(newmsg.encode()).decode()
|
|
if neweventtype:
|
|
msg = ET.SubElement(act, "NewWLANEventType")
|
|
msg.text = neweventtype
|
|
if neweventmac:
|
|
msg = ET.SubElement(act, "NewWLANEventMAC")
|
|
msg.text = neweventmac
|
|
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"'}
|
|
if include_soap_action:
|
|
headers["SOAPAction"] = '"urn:schemas-wifialliance-org:service:WFAWLANConfig:1#%s"' % action
|
|
elif soap_action_override:
|
|
headers["SOAPAction"] = soap_action_override
|
|
decl = b'<?xml version=\'1.0\' encoding=\'utf8\'?>\n'
|
|
conn.request("POST", path, decl + ET.tostring(root), headers)
|
|
return conn.getresponse()
|
|
|
|
def test_ap_wps_upnp(dev, apdev):
|
|
"""WPS AP and UPnP operations"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
urls = upnp_get_urls(location)
|
|
|
|
if sys.version_info[0] > 2:
|
|
conn = urlopen(urls['scpd_url'])
|
|
else:
|
|
conn = urlopen(urls['scpd_url'], proxies={})
|
|
scpd = conn.read()
|
|
|
|
if sys.version_info[0] > 2:
|
|
try:
|
|
conn = urlopen(urljoin(location, "unknown.html"))
|
|
raise Exception("Unexpected HTTP response to GET unknown URL")
|
|
except HTTPError as e:
|
|
if e.code != 404:
|
|
raise Exception("Unexpected HTTP response to GET unknown URL")
|
|
else:
|
|
conn = urlopen(urljoin(location, "unknown.html"), proxies={})
|
|
if conn.getcode() != 404:
|
|
raise Exception("Unexpected HTTP response to GET unknown URL")
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
#conn.set_debuglevel(1)
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"SOAPAction": '"urn:schemas-wifialliance-org:service:WFAWLANConfig:1#GetDeviceInfo"'}
|
|
conn.request("POST", "hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
conn.request("UNKNOWN", "hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"SOAPAction": '"urn:some-unknown-action#GetDeviceInfo"'}
|
|
ctrlurl = urlparse(urls['control_url'])
|
|
conn.request("POST", ctrlurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 401:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("GetDeviceInfo without SOAPAction header")
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo",
|
|
include_soap_action=False)
|
|
if resp.status != 401:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("GetDeviceInfo with invalid SOAPAction header")
|
|
for act in ["foo",
|
|
"urn:schemas-wifialliance-org:service:WFAWLANConfig:1#GetDeviceInfo",
|
|
'"urn:schemas-wifialliance-org:service:WFAWLANConfig:1"',
|
|
'"urn:schemas-wifialliance-org:service:WFAWLANConfig:123#GetDevice']:
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo",
|
|
include_soap_action=False,
|
|
soap_action_override=act)
|
|
if resp.status != 401:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
dev = resp.read().decode()
|
|
if "NewDeviceInfo" not in dev:
|
|
raise Exception("Unexpected GetDeviceInfo response")
|
|
|
|
logger.debug("PutMessage without required parameters")
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutMessage")
|
|
if resp.status != 600:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("PutWLANResponse without required parameters")
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse")
|
|
if resp.status != 600:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("SetSelectedRegistrar from unregistered ER")
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "SetSelectedRegistrar")
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Unknown action")
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "Unknown")
|
|
if resp.status != 401:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
def test_ap_wps_upnp_subscribe(dev, apdev):
|
|
"""WPS AP and UPnP event subscription"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
urls = upnp_get_urls(location)
|
|
eventurl = urlparse(urls['event_sub_url'])
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
#conn.set_debuglevel(1)
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", "hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:foobar",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Valid subscription")
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
logger.debug("Invalid re-subscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": "123456734567854",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid re-subscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": "uuid:123456734567854",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid re-subscription")
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"sid": sid,
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("SID mismatch in re-subscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": "uuid:4c2bca79-1ff4-4e43-85d4-952a2b8a51fb",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Valid re-subscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": sid,
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid2 = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid2)
|
|
|
|
if sid != sid2:
|
|
raise Exception("Unexpected SID change")
|
|
|
|
logger.debug("Valid re-subscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": "uuid: \t \t" + sid.split(':')[1],
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid unsubscription")
|
|
headers = {"sid": sid}
|
|
conn.request("UNSUBSCRIBE", "/hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
headers = {"foo": "bar"}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Valid unsubscription")
|
|
headers = {"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Unsubscription for not existing SID")
|
|
headers = {"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 412:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid unsubscription")
|
|
headers = {"sid": " \t \tfoo"}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid unsubscription")
|
|
headers = {"sid": "uuid:\t \tfoo"}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Invalid unsubscription")
|
|
headers = {"NT": "upnp:event",
|
|
"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 400:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.debug("Valid subscription with multiple callbacks")
|
|
headers = {"callback": '<http://127.0.0.1:12345/event> <http://127.0.0.1:12345/event>\t<http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event><http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
# Force subscription to be deleted due to errors
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
with alloc_fail(hapd, 1, "event_build_message"):
|
|
for i in range(10):
|
|
dev[1].dump_monitor()
|
|
dev[2].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[2].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[2].request("WPS_CANCEL")
|
|
if i % 4 == 1:
|
|
time.sleep(1)
|
|
else:
|
|
time.sleep(0.1)
|
|
time.sleep(0.2)
|
|
|
|
headers = {"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200 and resp.status != 412:
|
|
raise Exception("Unexpected HTTP response for UNSUBSCRIBE: %d" % resp.status)
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
with alloc_fail(hapd, 1, "http_client_addr;event_send_start"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response for SUBSCRIBE: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
headers = {"sid": sid}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response for UNSUBSCRIBE: %d" % resp.status)
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
with alloc_fail(hapd, 1, "=wps_upnp_event_add"):
|
|
for i in range(2):
|
|
dev[1].dump_monitor()
|
|
dev[2].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[2].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[2].request("WPS_CANCEL")
|
|
if i == 0:
|
|
time.sleep(1)
|
|
else:
|
|
time.sleep(0.1)
|
|
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "wpabuf_dup;wps_upnp_event_add"):
|
|
dev[1].dump_monitor()
|
|
dev[2].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[2].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[2].request("WPS_CANCEL")
|
|
time.sleep(0.1)
|
|
|
|
with fail_test(hapd, 1, "os_get_random;uuid_make;subscription_start"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "=subscription_start"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"callback": '',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"callback": ' <',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
with alloc_fail(hapd, 1, "wpabuf_alloc;subscription_first_event"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "wps_upnp_event_add;subscription_first_event"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "subscr_addr_add_url"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 2, "subscr_addr_add_url"):
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
for i in range(6):
|
|
headers = {"callback": '<http://127.0.0.1:%d/event>' % (12345 + i),
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "=upnp_wps_device_send_wlan_event"):
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
time.sleep(0.1)
|
|
|
|
with alloc_fail(hapd, 1, "wpabuf_alloc;upnp_wps_device_send_event"):
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
time.sleep(0.1)
|
|
|
|
with alloc_fail(hapd, 1,
|
|
"base64_gen_encode;?base64_encode;upnp_wps_device_send_wlan_event"):
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
time.sleep(0.1)
|
|
|
|
hapd.disable()
|
|
with alloc_fail(hapd, 1, "get_netif_info"):
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("ENABLE succeeded during OOM")
|
|
|
|
def test_ap_wps_upnp_subscribe_events(dev, apdev):
|
|
"""WPS AP and UPnP event subscription and many events"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
urls = upnp_get_urls(location)
|
|
eventurl = urlparse(urls['event_sub_url'])
|
|
|
|
class WPSERHTTPServer(StreamRequestHandler):
|
|
def handle(self):
|
|
data = self.rfile.readline().strip()
|
|
logger.debug(data)
|
|
self.wfile.write(gen_wps_event())
|
|
|
|
server = MyTCPServer(("127.0.0.1", 12345), WPSERHTTPServer)
|
|
server.timeout = 1
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
|
|
# Fetch the first event message
|
|
server.handle_request()
|
|
|
|
# Force subscription event queue to reach the maximum length by generating
|
|
# new proxied events without the ER fetching any of the pending events.
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[2].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
for i in range(16):
|
|
dev[1].dump_monitor()
|
|
dev[2].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[2].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
|
|
dev[2].request("WPS_CANCEL")
|
|
if i % 4 == 1:
|
|
time.sleep(1)
|
|
else:
|
|
time.sleep(0.1)
|
|
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[1].dump_monitor()
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("WPS success not reported")
|
|
|
|
# Close the WPS ER HTTP server without fetching all the pending events.
|
|
# This tests hostapd code path that clears subscription and the remaining
|
|
# event queue when the interface is deinitialized.
|
|
server.handle_request()
|
|
server.server_close()
|
|
|
|
dev[1].wait_connected()
|
|
|
|
def test_ap_wps_upnp_http_proto(dev, apdev):
|
|
"""WPS AP and UPnP/HTTP protocol testing"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc, timeout=0.2)
|
|
#conn.set_debuglevel(1)
|
|
|
|
conn.request("HEAD", "hello")
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected response to HEAD: " + str(resp.status))
|
|
conn.close()
|
|
|
|
for cmd in ["PUT", "DELETE", "TRACE", "CONNECT", "M-SEARCH", "M-POST"]:
|
|
try:
|
|
conn.request(cmd, "hello")
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
headers = {"Content-Length": 'abc'}
|
|
conn.request("HEAD", "hello", "\r\n\r\n", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
headers = {"Content-Length": '-10'}
|
|
conn.request("HEAD", "hello", "\r\n\r\n", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
headers = {"Content-Length": '10000000000000'}
|
|
conn.request("HEAD", "hello", "\r\n\r\nhello", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
headers = {"Transfer-Encoding": 'abc'}
|
|
conn.request("HEAD", "hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected response to HEAD: " + str(resp.status))
|
|
conn.close()
|
|
|
|
headers = {"Transfer-Encoding": 'chunked'}
|
|
conn.request("HEAD", "hello", "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected response to HEAD: " + str(resp.status))
|
|
conn.close()
|
|
|
|
# Too long a header
|
|
conn.request("HEAD", 5000 * 'A')
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
# Long URL but within header length limits
|
|
conn.request("HEAD", 3000 * 'A')
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected response to HEAD: " + str(resp.status))
|
|
conn.close()
|
|
|
|
headers = {"Content-Length": '20'}
|
|
conn.request("POST", "hello", 10 * 'A' + "\r\n\r\n", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
conn.request("POST", "hello", 5000 * 'A' + "\r\n\r\n")
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
conn.close()
|
|
|
|
conn.request("POST", "hello", 60000 * 'A' + "\r\n\r\n")
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
def test_ap_wps_upnp_http_proto_chunked(dev, apdev):
|
|
"""WPS AP and UPnP/HTTP protocol testing for chunked encoding"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
#conn.set_debuglevel(1)
|
|
|
|
headers = {"Transfer-Encoding": 'chunked'}
|
|
conn.request("POST", "hello",
|
|
"a\r\nabcdefghij\r\n" + "2\r\nkl\r\n" + "0\r\n\r\n",
|
|
headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
conn.close()
|
|
|
|
conn.putrequest("POST", "hello")
|
|
conn.putheader('Transfer-Encoding', 'chunked')
|
|
conn.endheaders()
|
|
conn.send(b"a\r\nabcdefghij\r\n")
|
|
time.sleep(0.1)
|
|
conn.send(b"2\r\nkl\r\n")
|
|
conn.send(b"0\r\n\r\n")
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
conn.close()
|
|
|
|
conn.putrequest("POST", "hello")
|
|
conn.putheader('Transfer-Encoding', 'chunked')
|
|
conn.endheaders()
|
|
completed = False
|
|
try:
|
|
for i in range(20000):
|
|
conn.send(b"1\r\nZ\r\n")
|
|
conn.send(b"0\r\n\r\n")
|
|
resp = conn.getresponse()
|
|
completed = True
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
if completed:
|
|
raise Exception("Too long chunked request did not result in connection reset")
|
|
|
|
headers = {"Transfer-Encoding": 'chunked'}
|
|
conn.request("POST", "hello", "80000000\r\na", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
conn.request("POST", "hello", "10000000\r\na", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
conn.close()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_disabled(dev, apdev):
|
|
"""WPS operations while WPS is disabled"""
|
|
ssid = "test-wps-disabled"
|
|
hapd = hostapd.add_ap(apdev[0], {"ssid": ssid})
|
|
if "FAIL" not in hapd.request("WPS_PBC"):
|
|
raise Exception("WPS_PBC succeeded unexpectedly")
|
|
if "FAIL" not in hapd.request("WPS_CANCEL"):
|
|
raise Exception("WPS_CANCEL succeeded unexpectedly")
|
|
|
|
def test_ap_wps_mixed_cred(dev, apdev):
|
|
"""WPS 2.0 STA merging mixed mode WPA/WPA2 credentials"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-wep"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"skip_cred_build": "1", "extra_cred": "wps-mixed-cred"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("WPS-SUCCESS event timed out")
|
|
nets = dev[0].list_networks()
|
|
if len(nets) != 1:
|
|
raise Exception("Unexpected number of network blocks")
|
|
id = nets[0]['id']
|
|
proto = dev[0].get_network(id, "proto")
|
|
if proto != "WPA RSN":
|
|
raise Exception("Unexpected merged proto field value: " + proto)
|
|
pairwise = dev[0].get_network(id, "pairwise")
|
|
p = pairwise.split()
|
|
if "CCMP" not in p or "TKIP" not in p:
|
|
raise Exception("Unexpected merged pairwise field value: " + pairwise)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_while_connected(dev, apdev):
|
|
"""WPS PBC provisioning while connected to another AP"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
hostapd.add_ap(apdev[1], {"ssid": "open"})
|
|
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
|
|
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Unexpected BSSID")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_while_connected_no_autoconnect(dev, apdev):
|
|
"""WPS PBC provisioning while connected to another AP and STA_AUTOCONNECT disabled"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
hostapd.add_ap(apdev[1], {"ssid": "open"})
|
|
|
|
try:
|
|
dev[0].request("STA_AUTOCONNECT 0")
|
|
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
|
|
|
|
logger.info("WPS provisioning step")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Unexpected BSSID")
|
|
finally:
|
|
dev[0].request("STA_AUTOCONNECT 1")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_from_event(dev, apdev):
|
|
"""WPS PBC event on AP to enable PBC"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
hapd.dump_monitor()
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
|
|
ev = hapd.wait_event(['WPS-ENROLLEE-SEEN'], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No WPS-ENROLLEE-SEEN event on AP")
|
|
vals = ev.split(' ')
|
|
if vals[1] != dev[0].p2p_interface_addr():
|
|
raise Exception("Unexpected enrollee address: " + vals[1])
|
|
if vals[5] != '4':
|
|
raise Exception("Unexpected Device Password Id: " + vals[5])
|
|
hapd.request("WPS_PBC")
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
def test_ap_wps_ap_scan_2(dev, apdev):
|
|
"""AP_SCAN 2 for WPS"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
hapd.request("WPS_PBC")
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
|
|
wpas.dump_monitor()
|
|
|
|
if "OK" not in wpas.request("AP_SCAN 2"):
|
|
raise Exception("Failed to set AP_SCAN 2")
|
|
|
|
wpas.flush_scan_cache()
|
|
wpas.scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
wpas.dump_monitor()
|
|
wpas.request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = wpas.wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-SUCCESS event timed out")
|
|
wpas.wait_connected(timeout=30)
|
|
wpas.dump_monitor()
|
|
wpas.request("DISCONNECT")
|
|
wpas.wait_disconnected()
|
|
id = wpas.list_networks()[0]['id']
|
|
pairwise = wpas.get_network(id, "pairwise")
|
|
if "CCMP" not in pairwise.split():
|
|
raise Exception("Unexpected pairwise parameter value: " + pairwise)
|
|
group = wpas.get_network(id, "group")
|
|
if "CCMP" not in group.split():
|
|
raise Exception("Unexpected group parameter value: " + group)
|
|
# Need to select a single cipher for ap_scan=2 testing
|
|
wpas.set_network(id, "pairwise", "CCMP")
|
|
wpas.set_network(id, "group", "CCMP")
|
|
wpas.request("BSS_FLUSH 0")
|
|
wpas.dump_monitor()
|
|
wpas.request("REASSOCIATE")
|
|
wpas.wait_connected(timeout=30)
|
|
wpas.dump_monitor()
|
|
wpas.request("DISCONNECT")
|
|
wpas.wait_disconnected()
|
|
wpas.flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_eapol_workaround(dev, apdev):
|
|
"""EAPOL workaround code path for 802.1X header length mismatch"""
|
|
ssid = "test-wps"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1"})
|
|
bssid = apdev[0]['bssid']
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev[0].request("SET ext_eapol_frame_io 1")
|
|
hapd.request("WPS_PBC")
|
|
dev[0].request("WPS_PBC")
|
|
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
|
|
res = dev[0].request("EAPOL_RX " + bssid + " 020000040193000501FFFF")
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
def test_ap_wps_iteration(dev, apdev):
|
|
"""WPS PIN and iterate through APs without selected registrar"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
ssid2 = "test-wps-conf2"
|
|
hapd2 = hostapd.add_ap(apdev[1],
|
|
{"ssid": ssid2, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
pin = dev[0].request("WPS_PIN any")
|
|
|
|
# Wait for iteration through all WPS APs to happen before enabling any
|
|
# Registrar.
|
|
for i in range(2):
|
|
ev = dev[0].wait_event(["Associated with"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("No association seen")
|
|
ev = dev[0].wait_event(["WPS-M2D"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No M2D from AP")
|
|
dev[0].wait_disconnected()
|
|
|
|
# Verify that each AP requested PIN
|
|
ev = hapd.wait_event(["WPS-PIN-NEEDED"], timeout=1)
|
|
if ev is None:
|
|
raise Exception("No WPS-PIN-NEEDED event from AP")
|
|
ev = hapd2.wait_event(["WPS-PIN-NEEDED"], timeout=1)
|
|
if ev is None:
|
|
raise Exception("No WPS-PIN-NEEDED event from AP2")
|
|
|
|
# Provide PIN to one of the APs and verify that connection gets formed
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
def test_ap_wps_iteration_error(dev, apdev):
|
|
"""WPS AP iteration on no Selected Registrar and error case with an AP"""
|
|
ssid = "test-wps-conf-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"})
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
bssid = apdev[0]['bssid']
|
|
pin = dev[0].wps_read_pin()
|
|
dev[0].request("WPS_PIN any " + pin)
|
|
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No EAPOL-TX (EAP-Request/Identity) from hostapd")
|
|
dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No EAPOL-TX (EAP-WSC/Start) from hostapd")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No CTRL-EVENT-EAP-STARTED")
|
|
|
|
# Do not forward any more EAPOL frames to test wpa_supplicant behavior for
|
|
# a case with an incorrectly behaving WPS AP.
|
|
|
|
# Start the real target AP and activate registrar on it.
|
|
hapd2 = hostapd.add_ap(apdev[1],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"})
|
|
hapd2.request("WPS_PIN any " + pin)
|
|
|
|
dev[0].wait_disconnected(timeout=15)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No CTRL-EVENT-EAP-STARTED for the second AP")
|
|
ev = dev[0].wait_event(["WPS-CRED-RECEIVED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("No WPS-CRED-RECEIVED for the second AP")
|
|
dev[0].wait_connected(timeout=15)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_priority(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP and wps_priority"""
|
|
ssid = "test-wps-conf-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
try:
|
|
dev[0].request("SET wps_priority 6")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
netw = dev[0].list_networks()
|
|
prio = dev[0].get_network(netw[0]['id'], 'priority')
|
|
if prio != '6':
|
|
raise Exception("Unexpected network priority: " + prio)
|
|
finally:
|
|
dev[0].request("SET wps_priority 0")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_and_non_wps(dev, apdev):
|
|
"""WPS and non-WPS AP in single hostapd process"""
|
|
params = {"ssid": "wps", "eap_server": "1", "wps_state": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
params = {"ssid": "no wps"}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
|
|
appin = hapd.request("WPS_AP_PIN random")
|
|
if "FAIL" in appin:
|
|
raise Exception("Could not generate random AP PIN")
|
|
if appin not in hapd.request("WPS_AP_PIN get"):
|
|
raise Exception("Could not fetch current AP PIN")
|
|
|
|
if "FAIL" in hapd.request("WPS_PBC"):
|
|
raise Exception("WPS_PBC failed")
|
|
if "FAIL" in hapd.request("WPS_CANCEL"):
|
|
raise Exception("WPS_CANCEL failed")
|
|
|
|
def test_ap_wps_init_oom(dev, apdev):
|
|
"""Initial AP configuration and OOM during PSK generation"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
with alloc_fail(hapd, 1, "base64_gen_encode;?base64_encode;wps_build_cred"):
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_disconnected()
|
|
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_oom(dev, apdev):
|
|
"""WPS ER OOM in XML processing"""
|
|
try:
|
|
_test_ap_wps_er_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
dev[1].request("WPS_CANCEL")
|
|
dev[0].request("DISCONNECT")
|
|
|
|
def _test_ap_wps_er_oom(dev, apdev):
|
|
ssid = "wps-er-ap-config"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
|
|
|
|
dev[0].connect(ssid, psk="12345678", scan_freq="2412")
|
|
|
|
with alloc_fail(dev[0], 1,
|
|
"base64_gen_decode;?base64_decode;xml_get_base64_item"):
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=3)
|
|
if ev is not None:
|
|
raise Exception("Unexpected AP discovery")
|
|
|
|
dev[0].request("WPS_ER_STOP")
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
with alloc_fail(dev[0], 1,
|
|
"base64_gen_decode;?base64_decode;xml_get_base64_item"):
|
|
dev[1].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("PBC scan failed")
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Enrollee discovery timed out")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_init_oom(dev, apdev):
|
|
"""WPS ER and OOM during init"""
|
|
try:
|
|
_test_ap_wps_er_init_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_init_oom(dev, apdev):
|
|
with alloc_fail(dev[0], 1, "wps_er_init"):
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
|
|
raise Exception("WPS_ER_START succeeded during OOM")
|
|
with alloc_fail(dev[0], 1, "http_server_init"):
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
|
|
raise Exception("WPS_ER_START succeeded during OOM")
|
|
with alloc_fail(dev[0], 2, "http_server_init"):
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
|
|
raise Exception("WPS_ER_START succeeded during OOM")
|
|
with alloc_fail(dev[0], 1, "eloop_sock_table_add_sock;?eloop_register_sock;wps_er_ssdp_init"):
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
|
|
raise Exception("WPS_ER_START succeeded during OOM")
|
|
with fail_test(dev[0], 1, "os_get_random;wps_er_init"):
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
|
|
raise Exception("WPS_ER_START succeeded during os_get_random failure")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_er_init_fail(dev, apdev):
|
|
"""WPS ER init failure"""
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=does-not-exist"):
|
|
dev[0].request("WPS_ER_STOP")
|
|
raise Exception("WPS_ER_START with non-existing ifname succeeded")
|
|
|
|
def test_ap_wps_wpa_cli_action(dev, apdev, test_params):
|
|
"""WPS events and wpa_cli action script"""
|
|
logdir = os.path.abspath(test_params['logdir'])
|
|
pidfile = os.path.join(logdir, 'ap_wps_wpa_cli_action.wpa_cli.pid')
|
|
logfile = os.path.join(logdir, 'ap_wps_wpa_cli_action.wpa_cli.res')
|
|
actionfile = os.path.join(logdir, 'ap_wps_wpa_cli_action.wpa_cli.action.sh')
|
|
|
|
with open(actionfile, 'w') as f:
|
|
f.write('#!/bin/sh\n')
|
|
f.write('echo $* >> %s\n' % logfile)
|
|
# Kill the process and wait some time before returning to allow all the
|
|
# pending events to be processed with some of this happening after the
|
|
# eloop SIGALRM signal has been scheduled.
|
|
f.write('if [ $2 = "WPS-SUCCESS" -a -r %s ]; then kill `cat %s`; sleep 1; fi\n' % (pidfile, pidfile))
|
|
|
|
os.chmod(actionfile, stat.S_IREAD | stat.S_IWRITE | stat.S_IEXEC |
|
|
stat.S_IRGRP | stat.S_IXGRP | stat.S_IROTH | stat.S_IXOTH)
|
|
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
prg = os.path.join(test_params['logdir'],
|
|
'alt-wpa_supplicant/wpa_supplicant/wpa_cli')
|
|
if not os.path.exists(prg):
|
|
prg = '../../wpa_supplicant/wpa_cli'
|
|
arg = [prg, '-P', pidfile, '-B', '-i', dev[0].ifname, '-a', actionfile]
|
|
subprocess.call(arg)
|
|
|
|
arg = ['ps', 'ax']
|
|
cmd = subprocess.Popen(arg, stdout=subprocess.PIPE)
|
|
out = cmd.communicate()[0].decode()
|
|
cmd.wait()
|
|
logger.debug("Processes:\n" + out)
|
|
if "wpa_cli -P %s -B -i %s" % (pidfile, dev[0].ifname) not in out:
|
|
raise Exception("Did not see wpa_cli running")
|
|
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
for i in range(30):
|
|
if not os.path.exists(pidfile):
|
|
break
|
|
time.sleep(0.1)
|
|
|
|
if not os.path.exists(logfile):
|
|
raise Exception("wpa_cli action results file not found")
|
|
with open(logfile, 'r') as f:
|
|
res = f.read()
|
|
if "WPS-SUCCESS" not in res:
|
|
raise Exception("WPS-SUCCESS event not seen in action file")
|
|
|
|
arg = ['ps', 'ax']
|
|
cmd = subprocess.Popen(arg, stdout=subprocess.PIPE)
|
|
out = cmd.communicate()[0].decode()
|
|
cmd.wait()
|
|
logger.debug("Remaining processes:\n" + out)
|
|
if "wpa_cli -P %s -B -i %s" % (pidfile, dev[0].ifname) in out:
|
|
raise Exception("wpa_cli still running")
|
|
|
|
if os.path.exists(pidfile):
|
|
raise Exception("PID file not removed")
|
|
|
|
def test_ap_wps_er_ssdp_proto(dev, apdev):
|
|
"""WPS ER SSDP protocol testing"""
|
|
try:
|
|
_test_ap_wps_er_ssdp_proto(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_ssdp_proto(dev, apdev):
|
|
socket.setdefaulttimeout(1)
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.bind(("239.255.255.250", 1900))
|
|
if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo foo"):
|
|
raise Exception("Invalid filter accepted")
|
|
if "OK" not in dev[0].request("WPS_ER_START ifname=lo 1.2.3.4"):
|
|
raise Exception("WPS_ER_START with filter failed")
|
|
(msg, addr) = sock.recvfrom(1000)
|
|
msg = msg.decode()
|
|
logger.debug("Received SSDP message from %s: %s" % (str(addr), msg))
|
|
if "M-SEARCH" not in msg:
|
|
raise Exception("Not an M-SEARCH")
|
|
sock.sendto(b"FOO", addr)
|
|
time.sleep(0.1)
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
(msg, addr) = sock.recvfrom(1000)
|
|
msg = msg.decode()
|
|
logger.debug("Received SSDP message from %s: %s" % (str(addr), msg))
|
|
if "M-SEARCH" not in msg:
|
|
raise Exception("Not an M-SEARCH")
|
|
sock.sendto(b"FOO", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nFOO\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nNTS:foo\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nNTS:ssdp:byebye\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\ncache-control: foo=1\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\ncache-control: max-age=1\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nusn:\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nusn:foo\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nusn: uuid:\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nusn: uuid: \r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nusn: uuid: foo\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nNTS:ssdp:byebye\r\n\r\n", addr)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:foo\r\n\r\n", addr)
|
|
with alloc_fail(dev[0], 1, "wps_er_ap_add"):
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:foo\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
time.sleep(0.1)
|
|
with alloc_fail(dev[0], 2, "wps_er_ap_add"):
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:foo\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
time.sleep(0.1)
|
|
|
|
# Add an AP with bogus URL
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:foo\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
# Update timeout on AP without updating URL
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:http://127.0.0.1:12345/foo.xml\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No WPS-ER-AP-REMOVE event on max-age timeout")
|
|
|
|
# Add an AP with a valid URL (but no server listing to it)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:http://127.0.0.1:12345/foo.xml\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No WPS-ER-AP-REMOVE event on max-age timeout")
|
|
|
|
sock.close()
|
|
|
|
wps_event_url = None
|
|
|
|
def gen_upnp_info(eventSubURL='wps_event', controlURL='wps_control',
|
|
udn='uuid:27ea801a-9e5c-4e73-bd82-f89cbcd10d7e'):
|
|
payload = '''<?xml version="1.0"?>
|
|
<root xmlns="urn:schemas-upnp-org:device-1-0">
|
|
<specVersion>
|
|
<major>1</major>
|
|
<minor>0</minor>
|
|
</specVersion>
|
|
<device>
|
|
<deviceType>urn:schemas-wifialliance-org:device:WFADevice:1</deviceType>
|
|
<friendlyName>WPS Access Point</friendlyName>
|
|
<manufacturer>Company</manufacturer>
|
|
<modelName>WAP</modelName>
|
|
<modelNumber>123</modelNumber>
|
|
<serialNumber>12345</serialNumber>
|
|
'''
|
|
if udn:
|
|
payload += '<UDN>' + udn + '</UDN>'
|
|
payload += '''<serviceList>
|
|
<service>
|
|
<serviceType>urn:schemas-wifialliance-org:service:WFAWLANConfig:1</serviceType>
|
|
<serviceId>urn:wifialliance-org:serviceId:WFAWLANConfig1</serviceId>
|
|
<SCPDURL>wps_scpd.xml</SCPDURL>
|
|
'''
|
|
if controlURL:
|
|
payload += '<controlURL>' + controlURL + '</controlURL>\n'
|
|
if eventSubURL:
|
|
payload += '<eventSubURL>' + eventSubURL + '</eventSubURL>\n'
|
|
payload += '''</service>
|
|
</serviceList>
|
|
</device>
|
|
</root>
|
|
'''
|
|
hdr = 'HTTP/1.1 200 OK\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
return (hdr + payload).encode()
|
|
|
|
def gen_wps_control(payload_override=None):
|
|
payload = '''<?xml version="1.0"?>
|
|
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
|
|
<s:Body>
|
|
<u:GetDeviceInfoResponse xmlns:u="urn:schemas-wifialliance-org:service:WFAWLANConfig:1">
|
|
<NewDeviceInfo>EEoAARAQIgABBBBHABAn6oAanlxOc72C+Jy80Q1+ECAABgIAAAADABAaABCJZ7DPtbU3Ust9
|
|
Z3wJF07WEDIAwH45D3i1OqB7eJGwTzqeapS71h3KyXncK2xJZ+xqScrlorNEg6LijBJzG2Ca
|
|
+FZli0iliDJd397yAx/jk4nFXco3q5ylBSvSw9dhJ5u1xBKSnTilKGlUHPhLP75PUqM3fot9
|
|
7zwtFZ4bx6x1sBA6oEe2d0aUJmLumQGCiKEIWlnxs44zego/2tAe81bDzdPBM7o5HH/FUhD+
|
|
KoGzFXp51atP+1n9Vta6AkI0Vye99JKLcC6Md9dMJltSVBgd4Xc4lRAEAAIAIxAQAAIADRAN
|
|
AAEBEAgAAgAEEEQAAQIQIQAHQ29tcGFueRAjAANXQVAQJAADMTIzEEIABTEyMzQ1EFQACAAG
|
|
AFDyBAABEBEAC1dpcmVsZXNzIEFQEDwAAQEQAgACAAAQEgACAAAQCQACAAAQLQAEgQIDABBJ
|
|
AAYANyoAASA=
|
|
</NewDeviceInfo>
|
|
</u:GetDeviceInfoResponse>
|
|
</s:Body>
|
|
</s:Envelope>
|
|
'''
|
|
if payload_override:
|
|
payload = payload_override
|
|
hdr = 'HTTP/1.1 200 OK\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
return (hdr + payload).encode()
|
|
|
|
def gen_wps_event(sid='uuid:7eb3342a-8a5f-47fe-a585-0785bfec6d8a'):
|
|
payload = ""
|
|
hdr = 'HTTP/1.1 200 OK\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n'
|
|
if sid:
|
|
hdr += 'SID: ' + sid + '\r\n'
|
|
hdr += 'Timeout: Second-1801\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
return (hdr + payload).encode()
|
|
|
|
class WPSAPHTTPServer(StreamRequestHandler):
|
|
def handle(self):
|
|
data = self.rfile.readline().decode().strip()
|
|
logger.info("HTTP server received: " + data)
|
|
while True:
|
|
hdr = self.rfile.readline().decode().strip()
|
|
if len(hdr) == 0:
|
|
break
|
|
logger.info("HTTP header: " + hdr)
|
|
if "CALLBACK:" in hdr:
|
|
global wps_event_url
|
|
wps_event_url = hdr.split(' ')[1].strip('<>')
|
|
|
|
if "GET /foo.xml" in data:
|
|
self.handle_upnp_info()
|
|
elif "POST /wps_control" in data:
|
|
self.handle_wps_control()
|
|
elif "SUBSCRIBE /wps_event" in data:
|
|
self.handle_wps_event()
|
|
else:
|
|
self.handle_others(data)
|
|
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info())
|
|
|
|
def handle_wps_control(self):
|
|
self.wfile.write(gen_wps_control())
|
|
|
|
def handle_wps_event(self):
|
|
self.wfile.write(gen_wps_event())
|
|
|
|
def handle_others(self, data):
|
|
logger.info("Ignore HTTP request: " + data)
|
|
|
|
class MyTCPServer(TCPServer):
|
|
def __init__(self, addr, handler):
|
|
self.allow_reuse_address = True
|
|
TCPServer.__init__(self, addr, handler)
|
|
|
|
def wps_er_start(dev, http_server, max_age=1, wait_m_search=False,
|
|
location_url=None):
|
|
socket.setdefaulttimeout(1)
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.bind(("239.255.255.250", 1900))
|
|
dev.request("WPS_ER_START ifname=lo")
|
|
for i in range(100):
|
|
(msg, addr) = sock.recvfrom(1000)
|
|
msg = msg.decode()
|
|
logger.debug("Received SSDP message from %s: %s" % (str(addr), msg))
|
|
if "M-SEARCH" in msg:
|
|
break
|
|
if not wait_m_search:
|
|
raise Exception("Not an M-SEARCH")
|
|
if i == 99:
|
|
raise Exception("No M-SEARCH seen")
|
|
|
|
# Add an AP with a valid URL and server listing to it
|
|
server = MyTCPServer(("127.0.0.1", 12345), http_server)
|
|
if not location_url:
|
|
location_url = 'http://127.0.0.1:12345/foo.xml'
|
|
sock.sendto(("HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:%s\r\ncache-control:max-age=%d\r\n\r\n" % (location_url, max_age)).encode(), addr)
|
|
server.timeout = 1
|
|
return server, sock
|
|
|
|
def wps_er_stop(dev, sock, server, on_alloc_fail=False):
|
|
sock.close()
|
|
server.server_close()
|
|
|
|
if on_alloc_fail:
|
|
done = False
|
|
for i in range(50):
|
|
res = dev.request("GET_ALLOC_FAIL")
|
|
if res.startswith("0:"):
|
|
done = True
|
|
break
|
|
time.sleep(0.1)
|
|
if not done:
|
|
raise Exception("No allocation failure reported")
|
|
else:
|
|
ev = dev.wait_event(["WPS-ER-AP-REMOVE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No WPS-ER-AP-REMOVE event on max-age timeout")
|
|
dev.request("WPS_ER_STOP")
|
|
|
|
def run_wps_er_proto_test(dev, handler, no_event_url=False, location_url=None):
|
|
try:
|
|
uuid = '27ea801a-9e5c-4e73-bd82-f89cbcd10d7e'
|
|
server, sock = wps_er_start(dev, handler, location_url=location_url)
|
|
global wps_event_url
|
|
wps_event_url = None
|
|
server.handle_request()
|
|
server.handle_request()
|
|
server.handle_request()
|
|
server.server_close()
|
|
if no_event_url:
|
|
if wps_event_url:
|
|
raise Exception("Received event URL unexpectedly")
|
|
return
|
|
if wps_event_url is None:
|
|
raise Exception("Did not get event URL")
|
|
logger.info("Event URL: " + wps_event_url)
|
|
finally:
|
|
dev.request("WPS_ER_STOP")
|
|
|
|
def send_wlanevent(url, uuid, data, no_response=False):
|
|
conn = HTTPConnection(url.netloc)
|
|
payload = '''<?xml version="1.0" encoding="utf-8"?>
|
|
<e:propertyset xmlns:e="urn:schemas-upnp-org:event-1-0">
|
|
<e:property><STAStatus>1</STAStatus></e:property>
|
|
<e:property><APStatus>1</APStatus></e:property>
|
|
<e:property><WLANEvent>'''
|
|
payload += base64.b64encode(data).decode()
|
|
payload += '</WLANEvent></e:property></e:propertyset>'
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"Server": "Unspecified, UPnP/1.0, Unspecified",
|
|
"HOST": url.netloc,
|
|
"NT": "upnp:event",
|
|
"SID": "uuid:" + uuid,
|
|
"SEQ": "0",
|
|
"Content-Length": str(len(payload))}
|
|
conn.request("NOTIFY", url.path, payload, headers)
|
|
if no_response:
|
|
try:
|
|
conn.getresponse()
|
|
except Exception as e:
|
|
pass
|
|
return
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
def test_ap_wps_er_http_proto(dev, apdev):
|
|
"""WPS ER HTTP protocol testing"""
|
|
try:
|
|
_test_ap_wps_er_http_proto(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_http_proto(dev, apdev):
|
|
uuid = '27ea801a-9e5c-4e73-bd82-f89cbcd10d7e'
|
|
server, sock = wps_er_start(dev[0], WPSAPHTTPServer, max_age=15)
|
|
global wps_event_url
|
|
wps_event_url = None
|
|
server.handle_request()
|
|
server.handle_request()
|
|
server.handle_request()
|
|
server.server_close()
|
|
if wps_event_url is None:
|
|
raise Exception("Did not get event URL")
|
|
logger.info("Event URL: " + wps_event_url)
|
|
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No WPS-ER-AP-ADD event")
|
|
if uuid not in ev:
|
|
raise Exception("UUID mismatch")
|
|
|
|
sock.close()
|
|
|
|
logger.info("Valid Probe Request notification")
|
|
url = urlparse(wps_event_url)
|
|
conn = HTTPConnection(url.netloc)
|
|
payload = '''<?xml version="1.0" encoding="utf-8"?>
|
|
<e:propertyset xmlns:e="urn:schemas-upnp-org:event-1-0">
|
|
<e:property><STAStatus>1</STAStatus></e:property>
|
|
<e:property><APStatus>1</APStatus></e:property>
|
|
<e:property><WLANEvent>ATAyOjAwOjAwOjAwOjAwOjAwEEoAARAQOgABAhAIAAIxSBBHABA2LbR7pTpRkYj7VFi5hrLk
|
|
EFQACAAAAAAAAAAAEDwAAQMQAgACAAAQCQACAAAQEgACAAAQIQABIBAjAAEgECQAASAQEQAI
|
|
RGV2aWNlIEEQSQAGADcqAAEg
|
|
</WLANEvent></e:property>
|
|
</e:propertyset>
|
|
'''
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"Server": "Unspecified, UPnP/1.0, Unspecified",
|
|
"HOST": url.netloc,
|
|
"NT": "upnp:event",
|
|
"SID": "uuid:" + uuid,
|
|
"SEQ": "0",
|
|
"Content-Length": str(len(payload))}
|
|
conn.request("NOTIFY", url.path, payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No WPS-ER-ENROLLEE-ADD event")
|
|
if "362db47b-a53a-5191-88fb-5458b986b2e4" not in ev:
|
|
raise Exception("No Enrollee UUID match")
|
|
|
|
logger.info("Incorrect event URL AP id")
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("NOTIFY", url.path + '123', payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.info("Missing AP id")
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("NOTIFY", '/event/' + url.path.split('/')[2],
|
|
payload, headers)
|
|
time.sleep(0.1)
|
|
|
|
logger.info("Incorrect event URL event id")
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("NOTIFY", '/event/123456789/123', payload, headers)
|
|
time.sleep(0.1)
|
|
|
|
logger.info("Incorrect event URL prefix")
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("NOTIFY", '/foobar/123456789/123', payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.info("Unsupported request")
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("FOOBAR", '/foobar/123456789/123', payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 501:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
logger.info("Unsupported request and OOM")
|
|
with alloc_fail(dev[0], 1, "wps_er_http_req"):
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("FOOBAR", '/foobar/123456789/123', payload, headers)
|
|
time.sleep(0.5)
|
|
|
|
logger.info("Too short WLANEvent")
|
|
data = b'\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("Invalid WLANEventMAC")
|
|
data = b'\x00qwertyuiopasdfghjklzxcvbnm'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("Unknown WLANEventType")
|
|
data = b'\xff02:00:00:00:00:00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("Probe Request notification without any attributes")
|
|
data = b'\x0102:00:00:00:00:00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("Probe Request notification with invalid attribute")
|
|
data = b'\x0102:00:00:00:00:00\xff'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message without any attributes")
|
|
data = b'\x0202:00:00:00:00:00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message with invalid attribute")
|
|
data = b'\x0202:00:00:00:00:00\xff'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message from new STA and not M1")
|
|
data = b'\x0202:ff:ff:ff:ff:ff' + b'\x10\x22\x00\x01\x05'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1")
|
|
data = b'\x0202:00:00:00:00:00'
|
|
data += b'\x10\x22\x00\x01\x04'
|
|
data += b'\x10\x47\x00\x10' + 16 * b'\x00'
|
|
data += b'\x10\x20\x00\x06\x02\x00\x00\x00\x00\x00'
|
|
data += b'\x10\x1a\x00\x10' + 16 * b'\x00'
|
|
data += b'\x10\x32\x00\xc0' + 192 * b'\x00'
|
|
data += b'\x10\x04\x00\x02\x00\x00'
|
|
data += b'\x10\x10\x00\x02\x00\x00'
|
|
data += b'\x10\x0d\x00\x01\x00'
|
|
data += b'\x10\x08\x00\x02\x00\x00'
|
|
data += b'\x10\x44\x00\x01\x00'
|
|
data += b'\x10\x21\x00\x00'
|
|
data += b'\x10\x23\x00\x00'
|
|
data += b'\x10\x24\x00\x00'
|
|
data += b'\x10\x42\x00\x00'
|
|
data += b'\x10\x54\x00\x08' + 8 * b'\x00'
|
|
data += b'\x10\x11\x00\x00'
|
|
data += b'\x10\x3c\x00\x01\x00'
|
|
data += b'\x10\x02\x00\x02\x00\x00'
|
|
data += b'\x10\x12\x00\x02\x00\x00'
|
|
data += b'\x10\x09\x00\x02\x00\x00'
|
|
data += b'\x10\x2d\x00\x04\x00\x00\x00\x00'
|
|
m1 = data
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: WSC_ACK")
|
|
data = b'\x0202:00:00:00:00:00' + b'\x10\x22\x00\x01\x0d'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1")
|
|
send_wlanevent(url, uuid, m1)
|
|
|
|
logger.info("EAP message: WSC_NACK")
|
|
data = b'\x0202:00:00:00:00:00' + b'\x10\x22\x00\x01\x0e'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 - Too long attribute values")
|
|
data = b'\x0202:00:00:00:00:00'
|
|
data += b'\x10\x11\x00\x21' + 33 * b'\x00'
|
|
data += b'\x10\x45\x00\x21' + 33 * b'\x00'
|
|
data += b'\x10\x42\x00\x21' + 33 * b'\x00'
|
|
data += b'\x10\x24\x00\x21' + 33 * b'\x00'
|
|
data += b'\x10\x23\x00\x21' + 33 * b'\x00'
|
|
data += b'\x10\x21\x00\x41' + 65 * b'\x00'
|
|
data += b'\x10\x49\x00\x09\x00\x37\x2a\x05\x02\x00\x00\x05\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing UUID-E")
|
|
data = b'\x0202:00:00:00:00:00'
|
|
data += b'\x10\x22\x00\x01\x04'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing MAC Address")
|
|
data += b'\x10\x47\x00\x10' + 16 * b'\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Enrollee Nonce")
|
|
data += b'\x10\x20\x00\x06\x02\x00\x00\x00\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Public Key")
|
|
data += b'\x10\x1a\x00\x10' + 16 * b'\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Authentication Type flags")
|
|
data += b'\x10\x32\x00\xc0' + 192 * b'\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Encryption Type Flags")
|
|
data += b'\x10\x04\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Connection Type flags")
|
|
data += b'\x10\x10\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Config Methods")
|
|
data += b'\x10\x0d\x00\x01\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Wi-Fi Protected Setup State")
|
|
data += b'\x10\x08\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Manufacturer")
|
|
data += b'\x10\x44\x00\x01\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Model Name")
|
|
data += b'\x10\x21\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Model Number")
|
|
data += b'\x10\x23\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Serial Number")
|
|
data += b'\x10\x24\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Primary Device Type")
|
|
data += b'\x10\x42\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Device Name")
|
|
data += b'\x10\x54\x00\x08' + 8 * b'\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing RF Bands")
|
|
data += b'\x10\x11\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Association State")
|
|
data += b'\x10\x3c\x00\x01\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Device Password ID")
|
|
data += b'\x10\x02\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing Configuration Error")
|
|
data += b'\x10\x12\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("EAP message: M1 missing OS Version")
|
|
data += b'\x10\x09\x00\x02\x00\x00'
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
logger.info("Check max concurrent requests")
|
|
addr = (url.hostname, url.port)
|
|
socks = {}
|
|
for i in range(20):
|
|
socks[i] = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
|
|
socket.IPPROTO_TCP)
|
|
socks[i].settimeout(10)
|
|
socks[i].connect(addr)
|
|
for i in range(20):
|
|
socks[i].send(b"GET / HTTP/1.1\r\n\r\n")
|
|
count = 0
|
|
for i in range(20):
|
|
try:
|
|
res = socks[i].recv(100).decode()
|
|
if "HTTP/1" in res:
|
|
count += 1
|
|
else:
|
|
logger.info("recv[%d]: len=%d" % (i, len(res)))
|
|
except:
|
|
pass
|
|
socks[i].close()
|
|
logger.info("%d concurrent HTTP GET operations returned response" % count)
|
|
if count < 8:
|
|
raise Exception("Too few concurrent HTTP connections accepted")
|
|
|
|
logger.info("OOM in HTTP server")
|
|
for func in ["http_request_init", "httpread_create",
|
|
"eloop_register_timeout;httpread_create",
|
|
"eloop_sock_table_add_sock;?eloop_register_sock;httpread_create",
|
|
"httpread_hdr_analyze"]:
|
|
with alloc_fail(dev[0], 1, func):
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
|
|
socket.IPPROTO_TCP)
|
|
sock.connect(addr)
|
|
sock.send(b"GET / HTTP/1.1\r\n\r\n")
|
|
try:
|
|
sock.recv(100)
|
|
except:
|
|
pass
|
|
sock.close()
|
|
|
|
logger.info("Invalid HTTP header")
|
|
for req in [" GET / HTTP/1.1\r\n\r\n",
|
|
"HTTP/1.1 200 OK\r\n\r\n",
|
|
"HTTP/\r\n\r\n",
|
|
"GET %%a%aa% HTTP/1.1\r\n\r\n",
|
|
"GET / HTTP/1.1\r\n FOO\r\n\r\n",
|
|
"NOTIFY / HTTP/1.1\r\n" + 4097*'a' + '\r\n\r\n',
|
|
"NOTIFY / HTTP/1.1\r\n\r\n" + 8193*'a',
|
|
"POST / HTTP/1.1\r\nTransfer-Encoding: CHUNKED\r\n\r\n foo\r\n",
|
|
"POST / HTTP/1.1\r\nTransfer-Encoding: CHUNKED\r\n\r\n1\r\nfoo\r\n",
|
|
"POST / HTTP/1.1\r\nTransfer-Encoding: CHUNKED\r\n\r\n0\r\n",
|
|
"POST / HTTP/1.1\r\nTransfer-Encoding: CHUNKED\r\n\r\n0\r\naa\ra\r\n\ra"]:
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
|
|
socket.IPPROTO_TCP)
|
|
sock.settimeout(0.1)
|
|
sock.connect(addr)
|
|
sock.send(req.encode())
|
|
try:
|
|
sock.recv(100)
|
|
except:
|
|
pass
|
|
sock.close()
|
|
|
|
with alloc_fail(dev[0], 2, "httpread_read_handler"):
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
|
|
socket.IPPROTO_TCP)
|
|
sock.connect(addr)
|
|
sock.send(b"NOTIFY / HTTP/1.1\r\n\r\n" + 4500 * b'a')
|
|
try:
|
|
sock.recv(100)
|
|
except:
|
|
pass
|
|
sock.close()
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
payload = '<foo'
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"Server": "Unspecified, UPnP/1.0, Unspecified",
|
|
"HOST": url.netloc,
|
|
"NT": "upnp:event",
|
|
"SID": "uuid:" + uuid,
|
|
"SEQ": "0",
|
|
"Content-Length": str(len(payload))}
|
|
conn.request("NOTIFY", url.path, payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
payload = '<WLANEvent foo></WLANEvent>'
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"',
|
|
"Server": "Unspecified, UPnP/1.0, Unspecified",
|
|
"HOST": url.netloc,
|
|
"NT": "upnp:event",
|
|
"SID": "uuid:" + uuid,
|
|
"SEQ": "0",
|
|
"Content-Length": str(len(payload))}
|
|
conn.request("NOTIFY", url.path, payload, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(dev[0], 1, "xml_get_first_item"):
|
|
send_wlanevent(url, uuid, b'')
|
|
|
|
with alloc_fail(dev[0], 1, "wpabuf_alloc_ext_data;xml_get_base64_item"):
|
|
send_wlanevent(url, uuid, b'foo')
|
|
|
|
for func in ["wps_init",
|
|
"wps_process_manufacturer",
|
|
"wps_process_model_name",
|
|
"wps_process_model_number",
|
|
"wps_process_serial_number",
|
|
"wps_process_dev_name"]:
|
|
with alloc_fail(dev[0], 1, func):
|
|
send_wlanevent(url, uuid, m1)
|
|
|
|
with alloc_fail(dev[0], 1, "wps_er_http_resp_ok"):
|
|
send_wlanevent(url, uuid, m1, no_response=True)
|
|
|
|
with alloc_fail(dev[0], 1, "wps_er_http_resp_not_found"):
|
|
url2 = urlparse(wps_event_url.replace('/event/', '/notfound/'))
|
|
send_wlanevent(url2, uuid, m1, no_response=True)
|
|
|
|
logger.info("EAP message: M1")
|
|
data = b'\x0202:11:22:00:00:00'
|
|
data += b'\x10\x22\x00\x01\x04'
|
|
data += b'\x10\x47\x00\x10' + 16 * b'\x00'
|
|
data += b'\x10\x20\x00\x06\x02\x00\x00\x00\x00\x00'
|
|
data += b'\x10\x1a\x00\x10' + 16 * b'\x00'
|
|
data += b'\x10\x32\x00\xc0' + 192 * b'\x00'
|
|
data += b'\x10\x04\x00\x02\x00\x00'
|
|
data += b'\x10\x10\x00\x02\x00\x00'
|
|
data += b'\x10\x0d\x00\x01\x00'
|
|
data += b'\x10\x08\x00\x02\x00\x00'
|
|
data += b'\x10\x44\x00\x01\x00'
|
|
data += b'\x10\x21\x00\x00'
|
|
data += b'\x10\x23\x00\x00'
|
|
data += b'\x10\x24\x00\x00'
|
|
data += b'\x10\x42\x00\x00'
|
|
data += b'\x10\x54\x00\x08' + 8 * b'\x00'
|
|
data += b'\x10\x11\x00\x00'
|
|
data += b'\x10\x3c\x00\x01\x00'
|
|
data += b'\x10\x02\x00\x02\x00\x00'
|
|
data += b'\x10\x12\x00\x02\x00\x00'
|
|
data += b'\x10\x09\x00\x02\x00\x00'
|
|
data += b'\x10\x2d\x00\x04\x00\x00\x00\x00'
|
|
dev[0].dump_monitor()
|
|
with alloc_fail(dev[0], 1, "wps_er_add_sta_data"):
|
|
send_wlanevent(url, uuid, data)
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=0.1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected enrollee add event")
|
|
send_wlanevent(url, uuid, data)
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=2)
|
|
if ev is None:
|
|
raise Exception("Enrollee add event not seen")
|
|
|
|
with alloc_fail(dev[0], 1,
|
|
"base64_gen_encode;?base64_encode;wps_er_soap_hdr"):
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
with alloc_fail(dev[0], 1, "wpabuf_alloc;wps_er_soap_hdr"):
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
with alloc_fail(dev[0], 1, "http_client_url_parse;wps_er_sta_send_msg"):
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
with alloc_fail(dev[0], 1, "http_client_addr;wps_er_sta_send_msg"):
|
|
send_wlanevent(url, uuid, data)
|
|
|
|
def test_ap_wps_er_http_proto_no_event_sub_url(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - no eventSubURL"""
|
|
class WPSAPHTTPServer_no_event_sub_url(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(eventSubURL=None))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_no_event_sub_url,
|
|
no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_event_sub_url_dns(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - DNS name in eventSubURL"""
|
|
class WPSAPHTTPServer_event_sub_url_dns(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(eventSubURL='http://example.com/wps_event'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_event_sub_url_dns,
|
|
no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_subscribe_oom(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - subscribe OOM"""
|
|
try:
|
|
_test_ap_wps_er_http_proto_subscribe_oom(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_http_proto_subscribe_oom(dev, apdev):
|
|
tests = [(1, "http_client_url_parse"),
|
|
(1, "wpabuf_alloc;wps_er_subscribe"),
|
|
(1, "http_client_addr"),
|
|
(1, "eloop_sock_table_add_sock;?eloop_register_sock;http_client_addr"),
|
|
(1, "eloop_register_timeout;http_client_addr")]
|
|
for count, func in tests:
|
|
with alloc_fail(dev[0], count, func):
|
|
server, sock = wps_er_start(dev[0], WPSAPHTTPServer)
|
|
server.handle_request()
|
|
server.handle_request()
|
|
wps_er_stop(dev[0], sock, server, on_alloc_fail=True)
|
|
|
|
def test_ap_wps_er_http_proto_no_sid(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - no SID"""
|
|
class WPSAPHTTPServer_no_sid(WPSAPHTTPServer):
|
|
def handle_wps_event(self):
|
|
self.wfile.write(gen_wps_event(sid=None))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_no_sid)
|
|
|
|
def test_ap_wps_er_http_proto_invalid_sid_no_uuid(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - invalid SID - no UUID"""
|
|
class WPSAPHTTPServer_invalid_sid_no_uuid(WPSAPHTTPServer):
|
|
def handle_wps_event(self):
|
|
self.wfile.write(gen_wps_event(sid='FOO'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_invalid_sid_no_uuid)
|
|
|
|
def test_ap_wps_er_http_proto_invalid_sid_uuid(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - invalid SID UUID"""
|
|
class WPSAPHTTPServer_invalid_sid_uuid(WPSAPHTTPServer):
|
|
def handle_wps_event(self):
|
|
self.wfile.write(gen_wps_event(sid='uuid:FOO'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_invalid_sid_uuid)
|
|
|
|
def test_ap_wps_er_http_proto_subscribe_failing(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - SUBSCRIBE failing"""
|
|
class WPSAPHTTPServer_fail_subscribe(WPSAPHTTPServer):
|
|
def handle_wps_event(self):
|
|
payload = ""
|
|
hdr = 'HTTP/1.1 404 Not Found\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Timeout: Second-1801\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
self.wfile.write((hdr + payload).encode())
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_fail_subscribe)
|
|
|
|
def test_ap_wps_er_http_proto_subscribe_invalid_response(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - SUBSCRIBE and invalid response"""
|
|
class WPSAPHTTPServer_subscribe_invalid_response(WPSAPHTTPServer):
|
|
def handle_wps_event(self):
|
|
payload = ""
|
|
hdr = 'HTTP/1.1 FOO\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Timeout: Second-1801\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
self.wfile.write((hdr + payload).encode())
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_subscribe_invalid_response)
|
|
|
|
def test_ap_wps_er_http_proto_subscribe_invalid_response(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - SUBSCRIBE and invalid response"""
|
|
class WPSAPHTTPServer_invalid_m1(WPSAPHTTPServer):
|
|
def handle_wps_control(self):
|
|
payload = '''<?xml version="1.0"?>
|
|
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
|
|
<s:Body>
|
|
<u:GetDeviceInfoResponse xmlns:u="urn:schemas-wifialliance-org:service:WFAWLANConfig:1">
|
|
<NewDeviceInfo>Rk9P</NewDeviceInfo>
|
|
</u:GetDeviceInfoResponse>
|
|
</s:Body>
|
|
</s:Envelope>
|
|
'''
|
|
self.wfile.write(gen_wps_control(payload_override=payload))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_invalid_m1, no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_upnp_info_no_device(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - No device in UPnP info"""
|
|
class WPSAPHTTPServer_no_device(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
payload = '''<?xml version="1.0"?>
|
|
<root xmlns="urn:schemas-upnp-org:device-1-0">
|
|
<specVersion>
|
|
<major>1</major>
|
|
<minor>0</minor>
|
|
</specVersion>
|
|
</root>
|
|
'''
|
|
hdr = 'HTTP/1.1 200 OK\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
self.wfile.write((hdr + payload).encode())
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_no_device, no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_upnp_info_no_device_type(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - No deviceType in UPnP info"""
|
|
class WPSAPHTTPServer_no_device(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
payload = '''<?xml version="1.0"?>
|
|
<root xmlns="urn:schemas-upnp-org:device-1-0">
|
|
<specVersion>
|
|
<major>1</major>
|
|
<minor>0</minor>
|
|
</specVersion>
|
|
<device>
|
|
</device>
|
|
</root>
|
|
'''
|
|
hdr = 'HTTP/1.1 200 OK\r\n' + \
|
|
'Content-Type: text/xml; charset="utf-8"\r\n' + \
|
|
'Server: Unspecified, UPnP/1.0, Unspecified\r\n' + \
|
|
'Connection: close\r\n' + \
|
|
'Content-Length: ' + str(len(payload)) + '\r\n' + \
|
|
'Date: Sat, 15 Aug 2015 18:55:08 GMT\r\n\r\n'
|
|
self.wfile.write((hdr + payload).encode())
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_no_device, no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_upnp_info_invalid_udn_uuid(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - Invalid UDN UUID"""
|
|
class WPSAPHTTPServer_invalid_udn_uuid(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(udn='uuid:foo'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_invalid_udn_uuid)
|
|
|
|
def test_ap_wps_er_http_proto_no_control_url(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - no controlURL"""
|
|
class WPSAPHTTPServer_no_control_url(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(controlURL=None))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_no_control_url,
|
|
no_event_url=True)
|
|
|
|
def test_ap_wps_er_http_proto_control_url_dns(dev, apdev):
|
|
"""WPS ER HTTP protocol testing - DNS name in controlURL"""
|
|
class WPSAPHTTPServer_control_url_dns(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(controlURL='http://example.com/wps_control'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_control_url_dns,
|
|
no_event_url=True)
|
|
|
|
def test_ap_wps_http_timeout(dev, apdev):
|
|
"""WPS AP/ER and HTTP timeout"""
|
|
try:
|
|
_test_ap_wps_http_timeout(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_http_timeout(dev, apdev):
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
url = urlparse(location)
|
|
addr = (url.hostname, url.port)
|
|
logger.debug("Open HTTP connection to hostapd, but do not complete request")
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
|
|
socket.IPPROTO_TCP)
|
|
sock.connect(addr)
|
|
sock.send(b"G")
|
|
|
|
class DummyServer(StreamRequestHandler):
|
|
def handle(self):
|
|
logger.debug("DummyServer - start 31 sec wait")
|
|
time.sleep(31)
|
|
logger.debug("DummyServer - wait done")
|
|
|
|
logger.debug("Start WPS ER")
|
|
server, sock2 = wps_er_start(dev[0], DummyServer, max_age=40,
|
|
wait_m_search=True)
|
|
|
|
logger.debug("Start server to accept, but not complete, HTTP connection from WPS ER")
|
|
# This will wait for 31 seconds..
|
|
server.handle_request()
|
|
|
|
logger.debug("Complete HTTP connection with hostapd (that should have already closed the connection)")
|
|
try:
|
|
sock.send("ET / HTTP/1.1\r\n\r\n")
|
|
res = sock.recv(100)
|
|
sock.close()
|
|
except:
|
|
pass
|
|
|
|
def test_ap_wps_er_url_parse(dev, apdev):
|
|
"""WPS ER and URL parsing special cases"""
|
|
try:
|
|
_test_ap_wps_er_url_parse(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_url_parse(dev, apdev):
|
|
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
|
|
sock.settimeout(1)
|
|
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
|
sock.bind(("239.255.255.250", 1900))
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
(msg, addr) = sock.recvfrom(1000)
|
|
msg = msg.decode()
|
|
logger.debug("Received SSDP message from %s: %s" % (str(addr), msg))
|
|
if "M-SEARCH" not in msg:
|
|
raise Exception("Not an M-SEARCH")
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:http://127.0.0.1\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"], timeout=2)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:http://127.0.0.1/:foo\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"], timeout=2)
|
|
sock.sendto(b"HTTP/1.1 200 OK\r\nST: urn:schemas-wifialliance-org:device:WFADevice:1\r\nlocation:http://255.255.255.255:0/foo.xml\r\ncache-control:max-age=1\r\n\r\n", addr)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-REMOVE"], timeout=2)
|
|
|
|
sock.close()
|
|
|
|
def test_ap_wps_er_link_update(dev, apdev):
|
|
"""WPS ER and link update special cases"""
|
|
class WPSAPHTTPServer_link_update(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(gen_upnp_info(controlURL='/wps_control'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_link_update)
|
|
|
|
class WPSAPHTTPServer_link_update2(WPSAPHTTPServer):
|
|
def handle_others(self, data):
|
|
if "GET / " in data:
|
|
self.wfile.write(gen_upnp_info(controlURL='/wps_control'))
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_link_update2,
|
|
location_url='http://127.0.0.1:12345')
|
|
|
|
def test_ap_wps_er_http_client(dev, apdev):
|
|
"""WPS ER and HTTP client special cases"""
|
|
with alloc_fail(dev[0], 1, "http_link_update"):
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer)
|
|
|
|
with alloc_fail(dev[0], 1, "wpabuf_alloc;http_client_url"):
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer, no_event_url=True)
|
|
|
|
with alloc_fail(dev[0], 1, "httpread_create;http_client_tx_ready"):
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer, no_event_url=True)
|
|
|
|
class WPSAPHTTPServer_req_as_resp(WPSAPHTTPServer):
|
|
def handle_upnp_info(self):
|
|
self.wfile.write(b"GET / HTTP/1.1\r\n\r\n")
|
|
run_wps_er_proto_test(dev[0], WPSAPHTTPServer_req_as_resp,
|
|
no_event_url=True)
|
|
|
|
def test_ap_wps_init_oom(dev, apdev):
|
|
"""wps_init OOM cases"""
|
|
ssid = "test-wps"
|
|
appin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"ap_pin": appin}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = dev[0].wps_read_pin()
|
|
|
|
with alloc_fail(hapd, 1, "wps_init"):
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
with alloc_fail(dev[0], 2, "wps_init"):
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
with alloc_fail(dev[0], 2, "wps_init"):
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PBC %s" % (apdev[0]['bssid']))
|
|
ev = hapd.wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
dev[0].dump_monitor()
|
|
new_ssid = "wps-new-ssid"
|
|
new_passphrase = "1234567890"
|
|
with alloc_fail(dev[0], 3, "wps_init"):
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK", "CCMP",
|
|
new_passphrase, no_wait=True)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
|
|
dev[0].flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_invalid_assoc_req_elem(dev, apdev):
|
|
"""WPS and invalid IE in Association Request frame"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = "12345670"
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
try:
|
|
dev[0].request("VENDOR_ELEM_ADD 13 dd050050f20410")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
for i in range(5):
|
|
ev = hapd.wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=10)
|
|
if ev and "vendor=14122" in ev:
|
|
break
|
|
if ev is None or "vendor=14122" not in ev:
|
|
raise Exception("EAP-WSC not started")
|
|
dev[0].request("WPS_CANCEL")
|
|
finally:
|
|
dev[0].request("VENDOR_ELEM_REMOVE 13 *")
|
|
|
|
def test_ap_wps_pbc_pin_mismatch(dev, apdev):
|
|
"""WPS PBC/PIN mismatch"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
hapd.request("SET wps_version_number 0x10")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
hapd.request("WPS_PBC")
|
|
pin = dev[0].wps_read_pin()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
|
|
if ev is None:
|
|
raise Exception("Scan did not complete")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
hapd.request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_ie_invalid(dev, apdev):
|
|
"""WPS PIN attempt with AP that has invalid WSC IE"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"vendor_elements": "dd050050f20410"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = {'ssid': "another", "vendor_elements": "dd050050f20410"}
|
|
hostapd.add_ap(apdev[1], params)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
pin = dev[0].wps_read_pin()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
|
|
if ev is None:
|
|
raise Exception("Scan did not complete")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_scan_prio_order(dev, apdev):
|
|
"""WPS scan priority ordering"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = {'ssid': "another", "vendor_elements": "dd050050f20410"}
|
|
hostapd.add_ap(apdev[1], params)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
pin = dev[0].wps_read_pin()
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
|
|
if ev is None:
|
|
raise Exception("Scan did not complete")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
def test_ap_wps_probe_req_ie_oom(dev, apdev):
|
|
"""WPS ProbeReq IE OOM"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
with alloc_fail(dev[0], 1, "wps_build_probe_req_ie"):
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Association not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
|
|
with alloc_fail(dev[0], 1, "wps_ie_encapsulate"):
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Association not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
hapd.disable()
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
time.sleep(0.2)
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_assoc_req_ie_oom(dev, apdev):
|
|
"""WPS AssocReq IE OOM"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
with alloc_fail(dev[0], 1, "wps_build_assoc_req_ie"):
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Association not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
def test_ap_wps_assoc_resp_ie_oom(dev, apdev):
|
|
"""WPS AssocResp IE OOM"""
|
|
ssid = "test-wps"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
with alloc_fail(hapd, 1, "wps_build_assoc_resp_ie"):
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
ev = hapd.wait_event(["AP-STA-CONNECTED"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Association not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_bss_info_errors(dev, apdev):
|
|
"""WPS BSS info errors"""
|
|
params = {"ssid": "1",
|
|
"vendor_elements": "dd0e0050f20410440001ff101100010a"}
|
|
hostapd.add_ap(apdev[0], params)
|
|
params = {'ssid': "2", "vendor_elements": "dd050050f20410"}
|
|
hostapd.add_ap(apdev[1], params)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
logger.info("BSS: " + str(bss))
|
|
if "wps_state" in bss:
|
|
raise Exception("Unexpected wps_state in BSS info")
|
|
if 'wps_device_name' not in bss:
|
|
raise Exception("No wps_device_name in BSS info")
|
|
if bss['wps_device_name'] != '_':
|
|
raise Exception("Unexpected wps_device_name value")
|
|
bss = dev[0].get_bss(apdev[1]['bssid'])
|
|
logger.info("BSS: " + str(bss))
|
|
|
|
with alloc_fail(dev[0], 1, "=wps_attr_text"):
|
|
bss = dev[0].get_bss(apdev[0]['bssid'])
|
|
logger.info("BSS(OOM): " + str(bss))
|
|
|
|
def wps_run_pbc_fail_ap(apdev, dev, hapd):
|
|
hapd.request("WPS_PBC")
|
|
dev.scan_for_bss(apdev['bssid'], freq="2412")
|
|
dev.request("WPS_PBC " + apdev['bssid'])
|
|
ev = dev.wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev.request("WPS_CANCEL")
|
|
dev.wait_disconnected()
|
|
for i in range(5):
|
|
try:
|
|
dev.flush_scan_cache()
|
|
break
|
|
except Exception as e:
|
|
if str(e).startswith("Failed to trigger scan"):
|
|
# Try again
|
|
time.sleep(1)
|
|
else:
|
|
raise
|
|
|
|
def wps_run_pbc_fail(apdev, dev):
|
|
hapd = wps_start_ap(apdev)
|
|
wps_run_pbc_fail_ap(apdev, dev, hapd)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_pk_oom(dev, apdev):
|
|
"""WPS and public key OOM"""
|
|
with alloc_fail(dev[0], 1, "wps_build_public_key"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_pk_oom_ap(dev, apdev):
|
|
"""WPS and public key OOM on AP"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
with alloc_fail(hapd, 1, "wps_build_public_key"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_encr_oom_ap(dev, apdev):
|
|
"""WPS and encrypted settings decryption OOM on AP"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
with alloc_fail(hapd, 1, "wps_decrypt_encr_settings"):
|
|
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " " + pin)
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No WPS-FAIL reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_encr_no_random_ap(dev, apdev):
|
|
"""WPS and no random data available for encryption on AP"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
with fail_test(hapd, 1, "os_get_random;wps_build_encr_settings"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_e_hash_no_random_sta(dev, apdev):
|
|
"""WPS and no random data available for e-hash on STA"""
|
|
with fail_test(dev[0], 1, "os_get_random;wps_build_e_hash"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m1_no_random(dev, apdev):
|
|
"""WPS and no random for M1 on STA"""
|
|
with fail_test(dev[0], 1, "os_get_random;wps_build_m1"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m1_oom(dev, apdev):
|
|
"""WPS and OOM for M1 on STA"""
|
|
with alloc_fail(dev[0], 1, "wps_build_m1"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m3_oom(dev, apdev):
|
|
"""WPS and OOM for M3 on STA"""
|
|
with alloc_fail(dev[0], 1, "wps_build_m3"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m5_oom(dev, apdev):
|
|
"""WPS and OOM for M5 on STA"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
for i in range(1, 3):
|
|
with alloc_fail(dev[0], i, "wps_build_m5"):
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m5_no_random(dev, apdev):
|
|
"""WPS and no random for M5 on STA"""
|
|
with fail_test(dev[0], 1,
|
|
"os_get_random;wps_build_encr_settings;wps_build_m5"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m7_oom(dev, apdev):
|
|
"""WPS and OOM for M7 on STA"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
for i in range(1, 3):
|
|
with alloc_fail(dev[0], i, "wps_build_m7"):
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_m7_no_random(dev, apdev):
|
|
"""WPS and no random for M7 on STA"""
|
|
with fail_test(dev[0], 1,
|
|
"os_get_random;wps_build_encr_settings;wps_build_m7"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_wsc_done_oom(dev, apdev):
|
|
"""WPS and OOM for WSC_Done on STA"""
|
|
with alloc_fail(dev[0], 1, "wps_build_wsc_done"):
|
|
wps_run_pbc_fail(apdev[0], dev[0])
|
|
|
|
def test_ap_wps_random_psk_fail(dev, apdev):
|
|
"""WPS and no random for PSK on AP"""
|
|
ssid = "test-wps"
|
|
pskfile = "/tmp/ap_wps_per_enrollee_psk.psk_file"
|
|
appin = "12345670"
|
|
try:
|
|
os.remove(pskfile)
|
|
except:
|
|
pass
|
|
|
|
try:
|
|
with open(pskfile, "w") as f:
|
|
f.write("# WPA PSKs\n")
|
|
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa": "2", "wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": "CCMP", "ap_pin": appin,
|
|
"wpa_psk_file": pskfile}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
with fail_test(hapd, 1, "os_get_random;wps_build_cred_network_key"):
|
|
dev[0].request("WPS_REG " + apdev[0]['bssid'] + " " + appin)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("No EAP failure reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
|
|
with fail_test(hapd, 1, "os_get_random;wps_build_cred"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
|
|
with alloc_fail(hapd, 1, "wps_build_cred"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
|
|
with alloc_fail(hapd, 2, "wps_build_cred"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
finally:
|
|
os.remove(pskfile)
|
|
|
|
def wps_ext_eap_identity_req(dev, hapd, bssid):
|
|
logger.debug("EAP-Identity/Request")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from hostapd")
|
|
res = dev.request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to wpa_supplicant failed")
|
|
|
|
def wps_ext_eap_identity_resp(hapd, dev, addr):
|
|
ev = dev.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
|
|
res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX to hostapd failed")
|
|
|
|
def wps_ext_eap_wsc(dst, src, src_addr, msg):
|
|
logger.debug(msg)
|
|
ev = src.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
res = dst.request("EAPOL_RX " + src_addr + " " + ev.split(' ')[2])
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
|
|
def wps_start_ext(apdev, dev, pbc=False, pin=None):
|
|
addr = dev.own_addr()
|
|
bssid = apdev['bssid']
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
hapd = hostapd.add_ap(apdev, params)
|
|
|
|
if pbc:
|
|
hapd.request("WPS_PBC")
|
|
else:
|
|
if pin is None:
|
|
pin = dev.wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev.scan_for_bss(bssid, freq="2412")
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev.request("SET ext_eapol_frame_io 1")
|
|
|
|
if pbc:
|
|
dev.request("WPS_PBC " + bssid)
|
|
else:
|
|
dev.request("WPS_PIN " + bssid + " " + pin)
|
|
return addr, bssid, hapd
|
|
|
|
def wps_auth_corrupt(dst, src, addr):
|
|
ev = src.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
src.request("SET ext_eapol_frame_io 0")
|
|
dst.request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[-24:-16] != '10050008':
|
|
raise Exception("Could not find Authenticator attribute")
|
|
# Corrupt Authenticator value
|
|
msg = msg[:-1] + '%x' % ((int(msg[-1], 16) + 1) % 16)
|
|
res = dst.request("EAPOL_RX " + addr + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
|
|
def wps_fail_finish(hapd, dev, fail_str):
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL not indicated")
|
|
if fail_str not in ev:
|
|
raise Exception("Unexpected WPS-FAIL value: " + ev)
|
|
dev.request("WPS_CANCEL")
|
|
dev.wait_disconnected()
|
|
|
|
def wps_auth_corrupt_from_ap(dev, hapd, bssid, fail_str):
|
|
wps_auth_corrupt(dev, hapd, bssid)
|
|
wps_fail_finish(hapd, dev, fail_str)
|
|
|
|
def wps_auth_corrupt_to_ap(dev, hapd, addr, fail_str):
|
|
wps_auth_corrupt(hapd, dev, addr)
|
|
wps_fail_finish(hapd, dev, fail_str)
|
|
|
|
def test_ap_wps_authenticator_mismatch_m2(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M2"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
wps_auth_corrupt_from_ap(dev[0], hapd, bssid, "msg=5")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m3(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M3"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
logger.debug("M3")
|
|
wps_auth_corrupt_to_ap(dev[0], hapd, addr, "msg=7")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m4(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M4"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M3")
|
|
logger.debug("M4")
|
|
wps_auth_corrupt_from_ap(dev[0], hapd, bssid, "msg=8")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m5(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M5"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M3")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M4")
|
|
logger.debug("M5")
|
|
wps_auth_corrupt_to_ap(dev[0], hapd, addr, "msg=9")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m6(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M6"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M3")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M4")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M5")
|
|
logger.debug("M6")
|
|
wps_auth_corrupt_from_ap(dev[0], hapd, bssid, "msg=10")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m7(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M7"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M3")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M4")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M5")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M6")
|
|
logger.debug("M7")
|
|
wps_auth_corrupt_to_ap(dev[0], hapd, addr, "msg=11")
|
|
|
|
def test_ap_wps_authenticator_mismatch_m8(dev, apdev):
|
|
"""WPS and Authenticator attribute mismatch in M8"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M3")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M4")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M5")
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "M6")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M7")
|
|
logger.debug("M8")
|
|
wps_auth_corrupt_from_ap(dev[0], hapd, bssid, "msg=12")
|
|
|
|
def test_ap_wps_authenticator_missing_m2(dev, apdev):
|
|
"""WPS and Authenticator attribute missing from M2"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[-24:-16] != '10050008':
|
|
raise Exception("Could not find Authenticator attribute")
|
|
# Remove Authenticator value
|
|
msg = msg[:-24]
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 12)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
wps_fail_finish(hapd, dev[0], "msg=5")
|
|
|
|
def test_ap_wps_m2_dev_passwd_id_p2p(dev, apdev):
|
|
"""WPS and M2 with different Device Password ID (P2P)"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[722:730] != '10120002':
|
|
raise Exception("Could not find Device Password ID attribute")
|
|
# Replace Device Password ID value. This will fail Authenticator check, but
|
|
# allows the code path in wps_process_dev_pw_id() to be checked from debug
|
|
# log.
|
|
msg = msg[0:730] + "0005" + msg[734:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
wps_fail_finish(hapd, dev[0], "msg=5")
|
|
|
|
def test_ap_wps_m2_dev_passwd_id_change_pin_to_pbc(dev, apdev):
|
|
"""WPS and M2 with different Device Password ID (PIN to PBC)"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[722:730] != '10120002':
|
|
raise Exception("Could not find Device Password ID attribute")
|
|
# Replace Device Password ID value (PIN --> PBC). This will be rejected.
|
|
msg = msg[0:730] + "0004" + msg[734:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
wps_fail_finish(hapd, dev[0], "msg=5")
|
|
|
|
def test_ap_wps_m2_dev_passwd_id_change_pbc_to_pin(dev, apdev):
|
|
"""WPS and M2 with different Device Password ID (PBC to PIN)"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[722:730] != '10120002':
|
|
raise Exception("Could not find Device Password ID attribute")
|
|
# Replace Device Password ID value. This will fail Authenticator check, but
|
|
# allows the code path in wps_process_dev_pw_id() to be checked from debug
|
|
# log.
|
|
msg = msg[0:730] + "0000" + msg[734:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
wps_fail_finish(hapd, dev[0], "msg=5")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_missing_dev_passwd_id(dev, apdev):
|
|
"""WPS and M2 without Device Password ID"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[722:730] != '10120002':
|
|
raise Exception("Could not find Device Password ID attribute")
|
|
# Remove Device Password ID value. This will fail Authenticator check, but
|
|
# allows the code path in wps_process_dev_pw_id() to be checked from debug
|
|
# log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 6)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:722] + msg[734:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
wps_fail_finish(hapd, dev[0], "msg=5")
|
|
|
|
def test_ap_wps_m2_missing_registrar_nonce(dev, apdev):
|
|
"""WPS and M2 without Registrar Nonce"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[96:104] != '10390010':
|
|
raise Exception("Could not find Registrar Nonce attribute")
|
|
# Remove Registrar Nonce. This will fail Authenticator check, but
|
|
# allows the code path in wps_process_registrar_nonce() to be checked from
|
|
# the debug log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 20)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:96] + msg[136:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_missing_enrollee_nonce(dev, apdev):
|
|
"""WPS and M2 without Enrollee Nonce"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[56:64] != '101a0010':
|
|
raise Exception("Could not find enrollee Nonce attribute")
|
|
# Remove Enrollee Nonce. This will fail Authenticator check, but
|
|
# allows the code path in wps_process_enrollee_nonce() to be checked from
|
|
# the debug log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 20)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:56] + msg[96:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_missing_uuid_r(dev, apdev):
|
|
"""WPS and M2 without UUID-R"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[136:144] != '10480010':
|
|
raise Exception("Could not find enrollee Nonce attribute")
|
|
# Remove UUID-R. This will fail Authenticator check, but allows the code
|
|
# path in wps_process_uuid_r() to be checked from the debug log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 20)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:136] + msg[176:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_invalid(dev, apdev):
|
|
"""WPS and M2 parsing failure"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[136:144] != '10480010':
|
|
raise Exception("Could not find enrollee Nonce attribute")
|
|
# Remove UUID-R. This will fail Authenticator check, but allows the code
|
|
# path in wps_process_uuid_r() to be checked from the debug log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 1)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:-2]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_missing_msg_type(dev, apdev):
|
|
"""WPS and M2 without Message Type"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[46:54] != '10220001':
|
|
raise Exception("Could not find Message Type attribute")
|
|
# Remove Message Type. This will fail Authenticator check, but allows the
|
|
# code path in wps_process_wsc_msg() to be checked from the debug log.
|
|
mlen = "%04x" % (int(msg[4:8], 16) - 5)
|
|
msg = msg[0:4] + mlen + msg[8:12] + mlen + msg[16:46] + msg[56:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_unknown_msg_type(dev, apdev):
|
|
"""WPS and M2 but unknown Message Type"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[46:54] != '10220001':
|
|
raise Exception("Could not find Message Type attribute")
|
|
# Replace Message Type value. This will be rejected.
|
|
msg = msg[0:54] + "00" + msg[56:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECT"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Disconnect event not seen")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_unknown_opcode(dev, apdev):
|
|
"""WPS and M2 but unknown opcode"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
# Replace opcode. This will be discarded in EAP-WSC processing.
|
|
msg = msg[0:32] + "00" + msg[34:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_unknown_opcode2(dev, apdev):
|
|
"""WPS and M2 but unknown opcode (WSC_Start)"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
# Replace opcode. This will be discarded in EAP-WSC processing.
|
|
msg = msg[0:32] + "01" + msg[34:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_m2_unknown_opcode3(dev, apdev):
|
|
"""WPS and M2 but unknown opcode (WSC_Done)"""
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev[0], addr, "M1")
|
|
logger.debug("M2")
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
# Replace opcode. This will be discarded in WPS Enrollee processing.
|
|
msg = msg[0:32] + "05" + msg[34:]
|
|
res = dev[0].request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def wps_m2_but_other(dev, apdev, title, msgtype):
|
|
addr, bssid, hapd = wps_start_ext(apdev, dev)
|
|
wps_ext_eap_identity_req(dev, hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev, addr)
|
|
wps_ext_eap_wsc(dev, hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev, addr, "M1")
|
|
logger.debug(title)
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev.request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[46:54] != '10220001':
|
|
raise Exception("Could not find Message Type attribute")
|
|
# Replace Message Type value. This will be rejected.
|
|
msg = msg[0:54] + msgtype + msg[56:]
|
|
res = dev.request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = dev.wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL event not seen")
|
|
dev.request("WPS_CANCEL")
|
|
dev.wait_disconnected()
|
|
|
|
def wps_m4_but_other(dev, apdev, title, msgtype):
|
|
addr, bssid, hapd = wps_start_ext(apdev, dev)
|
|
wps_ext_eap_identity_req(dev, hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev, addr)
|
|
wps_ext_eap_wsc(dev, hapd, bssid, "EAP-WSC/Start")
|
|
wps_ext_eap_wsc(hapd, dev, addr, "M1")
|
|
wps_ext_eap_wsc(dev, hapd, bssid, "M2")
|
|
wps_ext_eap_wsc(hapd, dev, addr, "M3")
|
|
logger.debug(title)
|
|
ev = hapd.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev.request("SET ext_eapol_frame_io 0")
|
|
msg = ev.split(' ')[2]
|
|
if msg[46:54] != '10220001':
|
|
raise Exception("Could not find Message Type attribute")
|
|
# Replace Message Type value. This will be rejected.
|
|
msg = msg[0:54] + msgtype + msg[56:]
|
|
res = dev.request("EAPOL_RX " + bssid + " " + msg)
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL event not seen")
|
|
dev.request("WPS_CANCEL")
|
|
dev.wait_disconnected()
|
|
|
|
def test_ap_wps_m2_msg_type_m4(dev, apdev):
|
|
"""WPS and M2 but Message Type M4"""
|
|
wps_m2_but_other(dev[0], apdev[0], "M2/M4", "08")
|
|
|
|
def test_ap_wps_m2_msg_type_m6(dev, apdev):
|
|
"""WPS and M2 but Message Type M6"""
|
|
wps_m2_but_other(dev[0], apdev[0], "M2/M6", "0a")
|
|
|
|
def test_ap_wps_m2_msg_type_m8(dev, apdev):
|
|
"""WPS and M2 but Message Type M8"""
|
|
wps_m2_but_other(dev[0], apdev[0], "M2/M8", "0c")
|
|
|
|
def test_ap_wps_m4_msg_type_m2(dev, apdev):
|
|
"""WPS and M4 but Message Type M2"""
|
|
wps_m4_but_other(dev[0], apdev[0], "M4/M2", "05")
|
|
|
|
def test_ap_wps_m4_msg_type_m2d(dev, apdev):
|
|
"""WPS and M4 but Message Type M2D"""
|
|
wps_m4_but_other(dev[0], apdev[0], "M4/M2D", "06")
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_config_methods(dev, apdev):
|
|
"""WPS configuration method parsing"""
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"config_methods": "ethernet display ext_nfc_token int_nfc_token physical_display physical_push_button"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"config_methods": "display push_button"}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
|
|
def test_ap_wps_set_selected_registrar_proto(dev, apdev):
|
|
"""WPS UPnP SetSelectedRegistrar protocol testing"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
urls = upnp_get_urls(location)
|
|
eventurl = urlparse(urls['event_sub_url'])
|
|
ctrlurl = urlparse(urls['control_url'])
|
|
url = urlparse(location)
|
|
conn = HTTPConnection(url.netloc)
|
|
|
|
class WPSERHTTPServer(StreamRequestHandler):
|
|
def handle(self):
|
|
data = self.rfile.readline().strip()
|
|
logger.debug(data)
|
|
self.wfile.write(gen_wps_event())
|
|
|
|
server = MyTCPServer(("127.0.0.1", 12345), WPSERHTTPServer)
|
|
server.timeout = 1
|
|
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
sid = resp.getheader("sid")
|
|
logger.debug("Subscription SID " + sid)
|
|
server.handle_request()
|
|
|
|
tests = [(500, "10"),
|
|
(200, "104a000110" + "1041000101" + "101200020000" +
|
|
"105300023148" +
|
|
"1049002c00372a0001200124111111111111222222222222333333333333444444444444555555555555666666666666" +
|
|
"10480010362db47ba53a519188fb5458b986b2e4"),
|
|
(200, "104a000110" + "1041000100" + "101200020000" +
|
|
"105300020000"),
|
|
(200, "104a000110" + "1041000100"),
|
|
(200, "104a000110")]
|
|
for status, test in tests:
|
|
tlvs = binascii.unhexlify(test)
|
|
newmsg = base64.b64encode(tlvs).decode()
|
|
msg = '<?xml version="1.0"?>\n'
|
|
msg += '<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'
|
|
msg += '<s:Body>'
|
|
msg += '<u:SetSelectedRegistrar xmlns:u="urn:schemas-wifialliance-org:service:WFAWLANConfig:1">'
|
|
msg += '<NewMessage>'
|
|
msg += newmsg
|
|
msg += "</NewMessage></u:SetSelectedRegistrar></s:Body></s:Envelope>"
|
|
headers = {"Content-type": 'text/xml; charset="utf-8"'}
|
|
headers["SOAPAction"] = '"urn:schemas-wifialliance-org:service:WFAWLANConfig:1#%s"' % "SetSelectedRegistrar"
|
|
conn.request("POST", ctrlurl.path, msg, headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != status:
|
|
raise Exception("Unexpected HTTP response: %d (expected %d)" % (resp.status, status))
|
|
|
|
def test_ap_wps_adv_oom(dev, apdev):
|
|
"""WPS AP and advertisement OOM"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
with alloc_fail(hapd, 1, "=msearchreply_state_machine_start"):
|
|
ssdp_send_msearch("urn:schemas-wifialliance-org:service:WFAWLANConfig:1",
|
|
no_recv=True)
|
|
time.sleep(0.2)
|
|
|
|
with alloc_fail(hapd, 1, "eloop_register_timeout;msearchreply_state_machine_start"):
|
|
ssdp_send_msearch("urn:schemas-wifialliance-org:service:WFAWLANConfig:1",
|
|
no_recv=True)
|
|
time.sleep(0.2)
|
|
|
|
with alloc_fail(hapd, 1,
|
|
"next_advertisement;advertisement_state_machine_stop"):
|
|
hapd.disable()
|
|
|
|
with alloc_fail(hapd, 1, "ssdp_listener_start"):
|
|
if "FAIL" not in hapd.request("ENABLE"):
|
|
raise Exception("ENABLE succeeded during OOM")
|
|
|
|
def test_wps_config_methods(dev):
|
|
"""WPS config method update"""
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
if "OK" not in wpas.request("SET config_methods display label"):
|
|
raise Exception("Failed to set config_methods")
|
|
if wpas.request("GET config_methods").strip() != "display label":
|
|
raise Exception("config_methods were not updated")
|
|
if "OK" not in wpas.request("SET config_methods "):
|
|
raise Exception("Failed to clear config_methods")
|
|
if wpas.request("GET config_methods").strip() != "":
|
|
raise Exception("config_methods were not cleared")
|
|
|
|
WPS_VENDOR_ID_WFA = 14122
|
|
WPS_VENDOR_TYPE = 1
|
|
|
|
# EAP-WSC Op-Code values
|
|
WSC_Start = 0x01
|
|
WSC_ACK = 0x02
|
|
WSC_NACK = 0x03
|
|
WSC_MSG = 0x04
|
|
WSC_Done = 0x05
|
|
WSC_FRAG_ACK = 0x06
|
|
|
|
ATTR_AP_CHANNEL = 0x1001
|
|
ATTR_ASSOC_STATE = 0x1002
|
|
ATTR_AUTH_TYPE = 0x1003
|
|
ATTR_AUTH_TYPE_FLAGS = 0x1004
|
|
ATTR_AUTHENTICATOR = 0x1005
|
|
ATTR_CONFIG_METHODS = 0x1008
|
|
ATTR_CONFIG_ERROR = 0x1009
|
|
ATTR_CONFIRM_URL4 = 0x100a
|
|
ATTR_CONFIRM_URL6 = 0x100b
|
|
ATTR_CONN_TYPE = 0x100c
|
|
ATTR_CONN_TYPE_FLAGS = 0x100d
|
|
ATTR_CRED = 0x100e
|
|
ATTR_ENCR_TYPE = 0x100f
|
|
ATTR_ENCR_TYPE_FLAGS = 0x1010
|
|
ATTR_DEV_NAME = 0x1011
|
|
ATTR_DEV_PASSWORD_ID = 0x1012
|
|
ATTR_E_HASH1 = 0x1014
|
|
ATTR_E_HASH2 = 0x1015
|
|
ATTR_E_SNONCE1 = 0x1016
|
|
ATTR_E_SNONCE2 = 0x1017
|
|
ATTR_ENCR_SETTINGS = 0x1018
|
|
ATTR_ENROLLEE_NONCE = 0x101a
|
|
ATTR_FEATURE_ID = 0x101b
|
|
ATTR_IDENTITY = 0x101c
|
|
ATTR_IDENTITY_PROOF = 0x101d
|
|
ATTR_KEY_WRAP_AUTH = 0x101e
|
|
ATTR_KEY_ID = 0x101f
|
|
ATTR_MAC_ADDR = 0x1020
|
|
ATTR_MANUFACTURER = 0x1021
|
|
ATTR_MSG_TYPE = 0x1022
|
|
ATTR_MODEL_NAME = 0x1023
|
|
ATTR_MODEL_NUMBER = 0x1024
|
|
ATTR_NETWORK_INDEX = 0x1026
|
|
ATTR_NETWORK_KEY = 0x1027
|
|
ATTR_NETWORK_KEY_INDEX = 0x1028
|
|
ATTR_NEW_DEVICE_NAME = 0x1029
|
|
ATTR_NEW_PASSWORD = 0x102a
|
|
ATTR_OOB_DEVICE_PASSWORD = 0x102c
|
|
ATTR_OS_VERSION = 0x102d
|
|
ATTR_POWER_LEVEL = 0x102f
|
|
ATTR_PSK_CURRENT = 0x1030
|
|
ATTR_PSK_MAX = 0x1031
|
|
ATTR_PUBLIC_KEY = 0x1032
|
|
ATTR_RADIO_ENABLE = 0x1033
|
|
ATTR_REBOOT = 0x1034
|
|
ATTR_REGISTRAR_CURRENT = 0x1035
|
|
ATTR_REGISTRAR_ESTABLISHED = 0x1036
|
|
ATTR_REGISTRAR_LIST = 0x1037
|
|
ATTR_REGISTRAR_MAX = 0x1038
|
|
ATTR_REGISTRAR_NONCE = 0x1039
|
|
ATTR_REQUEST_TYPE = 0x103a
|
|
ATTR_RESPONSE_TYPE = 0x103b
|
|
ATTR_RF_BANDS = 0x103c
|
|
ATTR_R_HASH1 = 0x103d
|
|
ATTR_R_HASH2 = 0x103e
|
|
ATTR_R_SNONCE1 = 0x103f
|
|
ATTR_R_SNONCE2 = 0x1040
|
|
ATTR_SELECTED_REGISTRAR = 0x1041
|
|
ATTR_SERIAL_NUMBER = 0x1042
|
|
ATTR_WPS_STATE = 0x1044
|
|
ATTR_SSID = 0x1045
|
|
ATTR_TOTAL_NETWORKS = 0x1046
|
|
ATTR_UUID_E = 0x1047
|
|
ATTR_UUID_R = 0x1048
|
|
ATTR_VENDOR_EXT = 0x1049
|
|
ATTR_VERSION = 0x104a
|
|
ATTR_X509_CERT_REQ = 0x104b
|
|
ATTR_X509_CERT = 0x104c
|
|
ATTR_EAP_IDENTITY = 0x104d
|
|
ATTR_MSG_COUNTER = 0x104e
|
|
ATTR_PUBKEY_HASH = 0x104f
|
|
ATTR_REKEY_KEY = 0x1050
|
|
ATTR_KEY_LIFETIME = 0x1051
|
|
ATTR_PERMITTED_CFG_METHODS = 0x1052
|
|
ATTR_SELECTED_REGISTRAR_CONFIG_METHODS = 0x1053
|
|
ATTR_PRIMARY_DEV_TYPE = 0x1054
|
|
ATTR_SECONDARY_DEV_TYPE_LIST = 0x1055
|
|
ATTR_PORTABLE_DEV = 0x1056
|
|
ATTR_AP_SETUP_LOCKED = 0x1057
|
|
ATTR_APPLICATION_EXT = 0x1058
|
|
ATTR_EAP_TYPE = 0x1059
|
|
ATTR_IV = 0x1060
|
|
ATTR_KEY_PROVIDED_AUTO = 0x1061
|
|
ATTR_802_1X_ENABLED = 0x1062
|
|
ATTR_APPSESSIONKEY = 0x1063
|
|
ATTR_WEPTRANSMITKEY = 0x1064
|
|
ATTR_REQUESTED_DEV_TYPE = 0x106a
|
|
|
|
# Message Type
|
|
WPS_Beacon = 0x01
|
|
WPS_ProbeRequest = 0x02
|
|
WPS_ProbeResponse = 0x03
|
|
WPS_M1 = 0x04
|
|
WPS_M2 = 0x05
|
|
WPS_M2D = 0x06
|
|
WPS_M3 = 0x07
|
|
WPS_M4 = 0x08
|
|
WPS_M5 = 0x09
|
|
WPS_M6 = 0x0a
|
|
WPS_M7 = 0x0b
|
|
WPS_M8 = 0x0c
|
|
WPS_WSC_ACK = 0x0d
|
|
WPS_WSC_NACK = 0x0e
|
|
WPS_WSC_DONE = 0x0f
|
|
|
|
def get_wsc_msg(dev):
|
|
ev = dev.wait_event(["EAPOL-TX"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAPOL-TX")
|
|
data = binascii.unhexlify(ev.split(' ')[2])
|
|
msg = {}
|
|
|
|
# Parse EAPOL header
|
|
if len(data) < 4:
|
|
raise Exception("No room for EAPOL header")
|
|
version, type, length = struct.unpack('>BBH', data[0:4])
|
|
msg['eapol_version'] = version
|
|
msg['eapol_type'] = type
|
|
msg['eapol_length'] = length
|
|
data = data[4:]
|
|
if length != len(data):
|
|
raise Exception("EAPOL header length mismatch (%d != %d)" % (length, len(data)))
|
|
if type != 0:
|
|
raise Exception("Unexpected EAPOL header type: %d" % type)
|
|
|
|
# Parse EAP header
|
|
if len(data) < 4:
|
|
raise Exception("No room for EAP header")
|
|
code, identifier, length = struct.unpack('>BBH', data[0:4])
|
|
msg['eap_code'] = code
|
|
msg['eap_identifier'] = identifier
|
|
msg['eap_length'] = length
|
|
data = data[4:]
|
|
if msg['eapol_length'] != msg['eap_length']:
|
|
raise Exception("EAP header length mismatch (%d != %d)" % (msg['eapol_length'], length))
|
|
|
|
# Parse EAP expanded header
|
|
if len(data) < 1:
|
|
raise Exception("No EAP type included")
|
|
msg['eap_type'], = struct.unpack('B', data[0:1])
|
|
data = data[1:]
|
|
|
|
if msg['eap_type'] == 254:
|
|
if len(data) < 3 + 4:
|
|
raise Exception("Truncated EAP expanded header")
|
|
msg['eap_vendor_id'], msg['eap_vendor_type'] = struct.unpack('>LL', b'\x00' + data[0:7])
|
|
data = data[7:]
|
|
else:
|
|
raise Exception("Unexpected EAP type")
|
|
|
|
if msg['eap_vendor_id'] != WPS_VENDOR_ID_WFA:
|
|
raise Exception("Unexpected Vendor-Id")
|
|
if msg['eap_vendor_type'] != WPS_VENDOR_TYPE:
|
|
raise Exception("Unexpected Vendor-Type")
|
|
|
|
# Parse EAP-WSC header
|
|
if len(data) < 2:
|
|
raise Exception("Truncated EAP-WSC header")
|
|
msg['wsc_opcode'], msg['wsc_flags'] = struct.unpack('BB', data[0:2])
|
|
data = data[2:]
|
|
|
|
# Parse WSC attributes
|
|
msg['raw_attrs'] = data
|
|
attrs = {}
|
|
while len(data) > 0:
|
|
if len(data) < 4:
|
|
raise Exception("Truncated attribute header")
|
|
attr, length = struct.unpack('>HH', data[0:4])
|
|
data = data[4:]
|
|
if length > len(data):
|
|
raise Exception("Truncated attribute 0x%04x" % attr)
|
|
attrs[attr] = data[0:length]
|
|
data = data[length:]
|
|
msg['wsc_attrs'] = attrs
|
|
|
|
if ATTR_MSG_TYPE in attrs:
|
|
msg['wsc_msg_type'], = struct.unpack('B', attrs[ATTR_MSG_TYPE])
|
|
|
|
return msg
|
|
|
|
def recv_wsc_msg(dev, opcode, msg_type):
|
|
msg = get_wsc_msg(dev)
|
|
if msg['wsc_opcode'] != opcode or msg['wsc_msg_type'] != msg_type:
|
|
raise Exception("Unexpected Op-Code/MsgType")
|
|
return msg, msg['wsc_attrs'], msg['raw_attrs']
|
|
|
|
def build_wsc_attr(attr, payload):
|
|
_payload = payload if type(payload) == bytes else payload.encode()
|
|
return struct.pack('>HH', attr, len(_payload)) + _payload
|
|
|
|
def build_attr_msg_type(msg_type):
|
|
return build_wsc_attr(ATTR_MSG_TYPE, struct.pack('B', msg_type))
|
|
|
|
def build_eap_wsc(eap_code, eap_id, payload, opcode=WSC_MSG):
|
|
length = 4 + 8 + 2 + len(payload)
|
|
# EAPOL header
|
|
msg = struct.pack('>BBH', 2, 0, length)
|
|
# EAP header
|
|
msg += struct.pack('>BBH', eap_code, eap_id, length)
|
|
# EAP expanded header for EAP-WSC
|
|
msg += struct.pack('B', 254)
|
|
msg += struct.pack('>L', WPS_VENDOR_ID_WFA)[1:4]
|
|
msg += struct.pack('>L', WPS_VENDOR_TYPE)
|
|
# EAP-WSC header
|
|
msg += struct.pack('BB', opcode, 0)
|
|
# WSC attributes
|
|
msg += payload
|
|
return msg
|
|
|
|
def build_eap_success(eap_id):
|
|
length = 4
|
|
# EAPOL header
|
|
msg = struct.pack('>BBH', 2, 0, length)
|
|
# EAP header
|
|
msg += struct.pack('>BBH', 3, eap_id, length)
|
|
return msg
|
|
|
|
def build_eap_failure(eap_id):
|
|
length = 4
|
|
# EAPOL header
|
|
msg = struct.pack('>BBH', 2, 0, length)
|
|
# EAP header
|
|
msg += struct.pack('>BBH', 4, eap_id, length)
|
|
return msg
|
|
|
|
def send_wsc_msg(dev, src, msg):
|
|
res = dev.request("EAPOL_RX " + src + " " + binascii.hexlify(msg).decode())
|
|
if "OK" not in res:
|
|
raise Exception("EAPOL_RX failed")
|
|
|
|
group_5_prime = 0xFFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3DC2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F83655D23DCA3AD961C62F356208552BB9ED529077096966D670C354E4ABC9804F1746C08CA237327FFFFFFFFFFFFFFFF
|
|
group_5_generator = 2
|
|
|
|
def wsc_kdf(key, label, bits):
|
|
result = b''
|
|
i = 1
|
|
while len(result) * 8 < bits:
|
|
data = struct.pack('>L', i) + label.encode() + struct.pack('>L', bits)
|
|
m = hmac.new(key, data, hashlib.sha256)
|
|
result += m.digest()
|
|
i += 1
|
|
return result[0:bits // 8]
|
|
|
|
def wsc_keys(kdk):
|
|
keys = wsc_kdf(kdk, "Wi-Fi Easy and Secure Key Derivation", 640)
|
|
authkey = keys[0:32]
|
|
keywrapkey = keys[32:48]
|
|
emsk = keys[48:80]
|
|
return authkey, keywrapkey, emsk
|
|
|
|
def wsc_dev_pw_half_psk(authkey, dev_pw):
|
|
m = hmac.new(authkey, dev_pw.encode(), hashlib.sha256)
|
|
return m.digest()[0:16]
|
|
|
|
def wsc_dev_pw_psk(authkey, dev_pw):
|
|
dev_pw_1 = dev_pw[0:len(dev_pw) // 2]
|
|
dev_pw_2 = dev_pw[len(dev_pw) // 2:]
|
|
psk1 = wsc_dev_pw_half_psk(authkey, dev_pw_1)
|
|
psk2 = wsc_dev_pw_half_psk(authkey, dev_pw_2)
|
|
return psk1, psk2
|
|
|
|
def build_attr_authenticator(authkey, prev_msg, curr_msg):
|
|
m = hmac.new(authkey, prev_msg + curr_msg, hashlib.sha256)
|
|
auth = m.digest()[0:8]
|
|
return build_wsc_attr(ATTR_AUTHENTICATOR, auth)
|
|
|
|
def build_attr_encr_settings(authkey, keywrapkey, data):
|
|
m = hmac.new(authkey, data, hashlib.sha256)
|
|
kwa = m.digest()[0:8]
|
|
data += build_wsc_attr(ATTR_KEY_WRAP_AUTH, kwa)
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = pad_len * struct.pack('B', pad_len)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
return build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
|
|
def decrypt_attr_encr_settings(authkey, keywrapkey, data):
|
|
if len(data) < 32 or len(data) % 16 != 0:
|
|
raise Exception("Unexpected Encrypted Settings length: %d" % len(data))
|
|
iv = data[0:16]
|
|
encr = data[16:]
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
decrypted = aes.decrypt(encr)
|
|
pad_len, = struct.unpack('B', decrypted[-1:])
|
|
if pad_len > len(decrypted):
|
|
raise Exception("Invalid padding in Encrypted Settings")
|
|
for i in range(-pad_len, -1):
|
|
if decrypted[i] != decrypted[-1]:
|
|
raise Exception("Invalid PS value in Encrypted Settings")
|
|
|
|
decrypted = decrypted[0:len(decrypted) - pad_len]
|
|
if len(decrypted) < 12:
|
|
raise Exception("Truncated Encrypted Settings plaintext")
|
|
kwa = decrypted[-12:]
|
|
attr, length = struct.unpack(">HH", kwa[0:4])
|
|
if attr != ATTR_KEY_WRAP_AUTH or length != 8:
|
|
raise Exception("Invalid KWA header")
|
|
kwa = kwa[4:]
|
|
decrypted = decrypted[0:len(decrypted) - 12]
|
|
|
|
m = hmac.new(authkey, decrypted, hashlib.sha256)
|
|
calc_kwa = m.digest()[0:8]
|
|
if kwa != calc_kwa:
|
|
raise Exception("KWA mismatch")
|
|
|
|
return decrypted
|
|
|
|
def zeropad_str(val, pad_len):
|
|
while len(val) < pad_len * 2:
|
|
val = '0' + val
|
|
return val
|
|
|
|
def wsc_dh_init():
|
|
# For now, use a hardcoded private key. In theory, this is supposed to be
|
|
# randomly selected.
|
|
own_private = 0x123456789
|
|
own_public = pow(group_5_generator, own_private, group_5_prime)
|
|
pk = binascii.unhexlify(zeropad_str(format(own_public, '02x'), 192))
|
|
return own_private, pk
|
|
|
|
def wsc_dh_kdf(peer_pk, own_private, mac_addr, e_nonce, r_nonce):
|
|
peer_public = int(binascii.hexlify(peer_pk), 16)
|
|
if peer_public < 2 or peer_public >= group_5_prime:
|
|
raise Exception("Invalid peer public key")
|
|
if pow(peer_public, (group_5_prime - 1) // 2, group_5_prime) != 1:
|
|
raise Exception("Unexpected Legendre symbol for peer public key")
|
|
|
|
shared_secret = pow(peer_public, own_private, group_5_prime)
|
|
ss = zeropad_str(format(shared_secret, "02x"), 192)
|
|
logger.debug("DH shared secret: " + ss)
|
|
|
|
dhkey = hashlib.sha256(binascii.unhexlify(ss)).digest()
|
|
logger.debug("DHKey: " + binascii.hexlify(dhkey).decode())
|
|
|
|
m = hmac.new(dhkey, e_nonce + mac_addr + r_nonce, hashlib.sha256)
|
|
kdk = m.digest()
|
|
logger.debug("KDK: " + binascii.hexlify(kdk).decode())
|
|
authkey, keywrapkey, emsk = wsc_keys(kdk)
|
|
logger.debug("AuthKey: " + binascii.hexlify(authkey).decode())
|
|
logger.debug("KeyWrapKey: " + binascii.hexlify(keywrapkey).decode())
|
|
logger.debug("EMSK: " + binascii.hexlify(emsk).decode())
|
|
return authkey, keywrapkey
|
|
|
|
def wsc_dev_pw_hash(authkey, dev_pw, e_pk, r_pk):
|
|
psk1, psk2 = wsc_dev_pw_psk(authkey, dev_pw)
|
|
logger.debug("PSK1: " + binascii.hexlify(psk1).decode())
|
|
logger.debug("PSK2: " + binascii.hexlify(psk2).decode())
|
|
|
|
# Note: Secret values are supposed to be random, but hardcoded values are
|
|
# fine for testing.
|
|
s1 = 16*b'\x77'
|
|
m = hmac.new(authkey, s1 + psk1 + e_pk + r_pk, hashlib.sha256)
|
|
hash1 = m.digest()
|
|
logger.debug("Hash1: " + binascii.hexlify(hash1).decode())
|
|
|
|
s2 = 16*b'\x88'
|
|
m = hmac.new(authkey, s2 + psk2 + e_pk + r_pk, hashlib.sha256)
|
|
hash2 = m.digest()
|
|
logger.debug("Hash2: " + binascii.hexlify(hash2).decode())
|
|
return s1, s2, hash1, hash2
|
|
|
|
def build_m1(eap_id, uuid_e, mac_addr, e_nonce, e_pk,
|
|
manufacturer='', model_name='', config_methods='\x00\x00'):
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M1)
|
|
attrs += build_wsc_attr(ATTR_UUID_E, uuid_e)
|
|
attrs += build_wsc_attr(ATTR_MAC_ADDR, mac_addr)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_PUBLIC_KEY, e_pk)
|
|
attrs += build_wsc_attr(ATTR_AUTH_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_ENCR_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONN_TYPE_FLAGS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_METHODS, config_methods)
|
|
attrs += build_wsc_attr(ATTR_WPS_STATE, '\x00')
|
|
attrs += build_wsc_attr(ATTR_MANUFACTURER, manufacturer)
|
|
attrs += build_wsc_attr(ATTR_MODEL_NAME, model_name)
|
|
attrs += build_wsc_attr(ATTR_MODEL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_SERIAL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_PRIMARY_DEV_TYPE, 8*'\x00')
|
|
attrs += build_wsc_attr(ATTR_DEV_NAME, '')
|
|
attrs += build_wsc_attr(ATTR_RF_BANDS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_ASSOC_STATE, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_DEV_PASSWORD_ID, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_ERROR, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_OS_VERSION, '\x00\x00\x00\x00')
|
|
m1 = build_eap_wsc(2, eap_id, attrs)
|
|
return m1, attrs
|
|
|
|
def build_m2(authkey, m1, eap_id, e_nonce, r_nonce, uuid_r, r_pk,
|
|
dev_pw_id='\x00\x00', eap_code=1):
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M2)
|
|
if e_nonce:
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
if r_nonce:
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_UUID_R, uuid_r)
|
|
if r_pk:
|
|
attrs += build_wsc_attr(ATTR_PUBLIC_KEY, r_pk)
|
|
attrs += build_wsc_attr(ATTR_AUTH_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_ENCR_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONN_TYPE_FLAGS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_METHODS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_MANUFACTURER, '')
|
|
attrs += build_wsc_attr(ATTR_MODEL_NAME, '')
|
|
attrs += build_wsc_attr(ATTR_MODEL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_SERIAL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_PRIMARY_DEV_TYPE, 8*'\x00')
|
|
attrs += build_wsc_attr(ATTR_DEV_NAME, '')
|
|
attrs += build_wsc_attr(ATTR_RF_BANDS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_ASSOC_STATE, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_ERROR, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_DEV_PASSWORD_ID, dev_pw_id)
|
|
attrs += build_wsc_attr(ATTR_OS_VERSION, '\x00\x00\x00\x00')
|
|
attrs += build_attr_authenticator(authkey, m1, attrs)
|
|
m2 = build_eap_wsc(eap_code, eap_id, attrs)
|
|
return m2, attrs
|
|
|
|
def build_m2d(m1, eap_id, e_nonce, r_nonce, uuid_r, dev_pw_id=None, eap_code=1):
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M2D)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_UUID_R, uuid_r)
|
|
attrs += build_wsc_attr(ATTR_AUTH_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_ENCR_TYPE_FLAGS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONN_TYPE_FLAGS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_METHODS, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_MANUFACTURER, '')
|
|
attrs += build_wsc_attr(ATTR_MODEL_NAME, '')
|
|
#attrs += build_wsc_attr(ATTR_MODEL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_SERIAL_NUMBER, '')
|
|
attrs += build_wsc_attr(ATTR_PRIMARY_DEV_TYPE, 8*'\x00')
|
|
attrs += build_wsc_attr(ATTR_DEV_NAME, '')
|
|
attrs += build_wsc_attr(ATTR_RF_BANDS, '\x00')
|
|
attrs += build_wsc_attr(ATTR_ASSOC_STATE, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_CONFIG_ERROR, '\x00\x00')
|
|
attrs += build_wsc_attr(ATTR_OS_VERSION, '\x00\x00\x00\x00')
|
|
if dev_pw_id:
|
|
attrs += build_wsc_attr(ATTR_DEV_PASSWORD_ID, dev_pw_id)
|
|
m2d = build_eap_wsc(eap_code, eap_id, attrs)
|
|
return m2d, attrs
|
|
|
|
def build_ack(eap_id, e_nonce, r_nonce, msg_type=WPS_WSC_ACK, eap_code=1):
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
if msg_type is not None:
|
|
attrs += build_attr_msg_type(msg_type)
|
|
if e_nonce:
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
if r_nonce:
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
msg = build_eap_wsc(eap_code, eap_id, attrs, opcode=WSC_ACK)
|
|
return msg, attrs
|
|
|
|
def build_nack(eap_id, e_nonce, r_nonce, config_error='\x00\x00',
|
|
msg_type=WPS_WSC_NACK, eap_code=1):
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
if msg_type is not None:
|
|
attrs += build_attr_msg_type(msg_type)
|
|
if e_nonce:
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
if r_nonce:
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
if config_error:
|
|
attrs += build_wsc_attr(ATTR_CONFIG_ERROR, config_error)
|
|
msg = build_eap_wsc(eap_code, eap_id, attrs, opcode=WSC_NACK)
|
|
return msg, attrs
|
|
|
|
def test_wps_ext(dev, apdev):
|
|
"""WPS against external implementation"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
wsc_start_id = msg['eap_identifier']
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m2_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, e_nonce,
|
|
m2_attrs[ATTR_REGISTRAR_NONCE])
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk,
|
|
m2_attrs[ATTR_PUBLIC_KEY])
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE,
|
|
m2_attrs[ATTR_REGISTRAR_NONCE])
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE,
|
|
m2_attrs[ATTR_REGISTRAR_NONCE])
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
logger.debug("Receive M6 from AP")
|
|
msg, m6_attrs, raw_m6_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M6)
|
|
|
|
logger.debug("Send M7 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE,
|
|
m2_attrs[ATTR_REGISTRAR_NONCE])
|
|
data = build_wsc_attr(ATTR_E_SNONCE2, e_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m6_attrs, attrs)
|
|
m7 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
raw_m7_attrs = attrs
|
|
send_wsc_msg(hapd, addr, m7)
|
|
|
|
logger.debug("Receive M8 from AP")
|
|
msg, m8_attrs, raw_m8_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M8)
|
|
m8_cred = decrypt_attr_encr_settings(authkey, keywrapkey,
|
|
m8_attrs[ATTR_ENCR_SETTINGS])
|
|
logger.debug("M8 Credential: " + binascii.hexlify(m8_cred).decode())
|
|
|
|
logger.debug("Prepare WSC_Done")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_WSC_DONE)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE,
|
|
m2_attrs[ATTR_REGISTRAR_NONCE])
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
# Do not send WSC_Done yet to allow exchangw with STA complete before the
|
|
# AP disconnects.
|
|
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
|
|
eap_id = wsc_start_id
|
|
logger.debug("Send WSC/Start to STA")
|
|
wsc_start = build_eap_wsc(1, eap_id, b'', opcode=WSC_Start)
|
|
send_wsc_msg(dev[0], bssid, wsc_start)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
raw_m4_attrs = attrs
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 from STA")
|
|
msg, m5_attrs, raw_m5_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M5)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m5_attrs, attrs)
|
|
raw_m6_attrs = attrs
|
|
m6 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m6)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M7 from STA")
|
|
msg, m7_attrs, raw_m7_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M7)
|
|
|
|
logger.debug("Send M8 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M8)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, m8_cred)
|
|
attrs += build_attr_authenticator(authkey, raw_m7_attrs, attrs)
|
|
raw_m8_attrs = attrs
|
|
m8 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m8)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
ev = dev[0].wait_event(["WPS-CRED-RECEIVED"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("wpa_supplicant did not report credential")
|
|
|
|
logger.debug("Receive WSC_Done from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_Done or msg['wsc_msg_type'] != WPS_WSC_DONE:
|
|
raise Exception("Unexpected Op-Code/MsgType for WSC_Done")
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
send_wsc_msg(hapd, addr, wsc_done)
|
|
|
|
ev = hapd.wait_event(["WPS-REG-SUCCESS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("hostapd did not report WPS success")
|
|
|
|
dev[0].wait_connected()
|
|
|
|
def wps_start_kwa(dev, apdev):
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
|
|
return r_s1, keywrapkey, authkey, raw_m3_attrs, eap_id, bssid, attrs
|
|
|
|
def wps_stop_kwa(dev, bssid, attrs, authkey, raw_m3_attrs, eap_id):
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_kwa_proto_no_kwa(dev, apdev):
|
|
"""WPS and KWA error: No KWA attribute"""
|
|
r_s1, keywrapkey, authkey, raw_m3_attrs, eap_id, bssid, attrs = wps_start_kwa(dev, apdev)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
# Encrypted Settings without KWA
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = pad_len * struct.pack('B', pad_len)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
attrs += build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
wps_stop_kwa(dev, bssid, attrs, authkey, raw_m3_attrs, eap_id)
|
|
|
|
def test_wps_ext_kwa_proto_data_after_kwa(dev, apdev):
|
|
"""WPS and KWA error: Data after KWA"""
|
|
r_s1, keywrapkey, authkey, raw_m3_attrs, eap_id, bssid, attrs = wps_start_kwa(dev, apdev)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
# Encrypted Settings and data after KWA
|
|
m = hmac.new(authkey, data, hashlib.sha256)
|
|
kwa = m.digest()[0:8]
|
|
data += build_wsc_attr(ATTR_KEY_WRAP_AUTH, kwa)
|
|
data += build_wsc_attr(ATTR_VENDOR_EXT, "1234567890")
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = pad_len * struct.pack('B', pad_len)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
attrs += build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
wps_stop_kwa(dev, bssid, attrs, authkey, raw_m3_attrs, eap_id)
|
|
|
|
def test_wps_ext_kwa_proto_kwa_mismatch(dev, apdev):
|
|
"""WPS and KWA error: KWA mismatch"""
|
|
r_s1, keywrapkey, authkey, raw_m3_attrs, eap_id, bssid, attrs = wps_start_kwa(dev, apdev)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
# Encrypted Settings and KWA with incorrect value
|
|
data += build_wsc_attr(ATTR_KEY_WRAP_AUTH, 8*'\x00')
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = pad_len * struct.pack('B', pad_len)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
attrs += build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
wps_stop_kwa(dev, bssid, attrs, authkey, raw_m3_attrs, eap_id)
|
|
|
|
def wps_run_cred_proto(dev, apdev, m8_cred, connect=False, no_connect=False):
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
raw_m4_attrs = attrs
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 from STA")
|
|
msg, m5_attrs, raw_m5_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M5)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m5_attrs, attrs)
|
|
raw_m6_attrs = attrs
|
|
m6 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m6)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M7 from STA")
|
|
msg, m7_attrs, raw_m7_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M7)
|
|
|
|
logger.debug("Send M8 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M8)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, m8_cred)
|
|
attrs += build_attr_authenticator(authkey, raw_m7_attrs, attrs)
|
|
raw_m8_attrs = attrs
|
|
m8 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m8)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
if no_connect:
|
|
logger.debug("Receive WSC_Done from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_Done or msg['wsc_msg_type'] != WPS_WSC_DONE:
|
|
raise Exception("Unexpected Op-Code/MsgType for WSC_Done")
|
|
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
|
|
dev[0].wait_disconnected()
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
elif connect:
|
|
logger.debug("Receive WSC_Done from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_Done or msg['wsc_msg_type'] != WPS_WSC_DONE:
|
|
raise Exception("Unexpected Op-Code/MsgType for WSC_Done")
|
|
|
|
hapd.request("SET ext_eapol_frame_io 0")
|
|
dev[0].request("SET ext_eapol_frame_io 0")
|
|
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
|
|
dev[0].wait_connected()
|
|
else:
|
|
# Verify STA NACK's the credential
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def build_cred(nw_idx='\x01', ssid='test-wps-conf', auth_type='\x00\x20',
|
|
encr_type='\x00\x08', nw_key="12345678",
|
|
mac_addr='\x00\x00\x00\x00\x00\x00'):
|
|
attrs = b''
|
|
if nw_idx is not None:
|
|
attrs += build_wsc_attr(ATTR_NETWORK_INDEX, nw_idx)
|
|
if ssid is not None:
|
|
attrs += build_wsc_attr(ATTR_SSID, ssid)
|
|
if auth_type is not None:
|
|
attrs += build_wsc_attr(ATTR_AUTH_TYPE, auth_type)
|
|
if encr_type is not None:
|
|
attrs += build_wsc_attr(ATTR_ENCR_TYPE, encr_type)
|
|
if nw_key is not None:
|
|
attrs += build_wsc_attr(ATTR_NETWORK_KEY, nw_key)
|
|
if mac_addr is not None:
|
|
attrs += build_wsc_attr(ATTR_MAC_ADDR, mac_addr)
|
|
return build_wsc_attr(ATTR_CRED, attrs)
|
|
|
|
def test_wps_ext_cred_proto_success(dev, apdev):
|
|
"""WPS and Credential: success"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr)
|
|
wps_run_cred_proto(dev, apdev, m8_cred, connect=True)
|
|
|
|
def test_wps_ext_cred_proto_mac_addr_mismatch(dev, apdev):
|
|
"""WPS and Credential: MAC Address mismatch"""
|
|
m8_cred = build_cred()
|
|
wps_run_cred_proto(dev, apdev, m8_cred, connect=True)
|
|
|
|
def test_wps_ext_cred_proto_zero_padding(dev, apdev):
|
|
"""WPS and Credential: zeropadded attributes"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, ssid='test-wps-conf\x00',
|
|
nw_key="12345678\x00")
|
|
wps_run_cred_proto(dev, apdev, m8_cred, connect=True)
|
|
|
|
def test_wps_ext_cred_proto_ssid_missing(dev, apdev):
|
|
"""WPS and Credential: SSID missing"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, ssid=None)
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_ssid_zero_len(dev, apdev):
|
|
"""WPS and Credential: Zero-length SSID"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, ssid="")
|
|
wps_run_cred_proto(dev, apdev, m8_cred, no_connect=True)
|
|
|
|
def test_wps_ext_cred_proto_auth_type_missing(dev, apdev):
|
|
"""WPS and Credential: Auth Type missing"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, auth_type=None)
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_encr_type_missing(dev, apdev):
|
|
"""WPS and Credential: Encr Type missing"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, encr_type=None)
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_network_key_missing(dev, apdev):
|
|
"""WPS and Credential: Network Key missing"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, nw_key=None)
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_network_key_missing_open(dev, apdev):
|
|
"""WPS and Credential: Network Key missing (open)"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, auth_type='\x00\x01',
|
|
encr_type='\x00\x01', nw_key=None, ssid="foo")
|
|
wps_run_cred_proto(dev, apdev, m8_cred, no_connect=True)
|
|
|
|
def test_wps_ext_cred_proto_mac_addr_missing(dev, apdev):
|
|
"""WPS and Credential: MAC Address missing"""
|
|
m8_cred = build_cred(mac_addr=None)
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_invalid_encr_type(dev, apdev):
|
|
"""WPS and Credential: Invalid Encr Type"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = build_cred(mac_addr=mac_addr, encr_type='\x00\x00')
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_cred_proto_missing_cred(dev, apdev):
|
|
"""WPS and Credential: Missing Credential"""
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
m8_cred = b''
|
|
wps_run_cred_proto(dev, apdev, m8_cred)
|
|
|
|
def test_wps_ext_proto_m2_no_public_key(dev, apdev):
|
|
"""WPS and no Public Key in M2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, None)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
# Verify STA NACK's the credential
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m2_invalid_public_key(dev, apdev):
|
|
"""WPS and invalid Public Key in M2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, 192*b'\xff')
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
# Verify STA NACK's the credential
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m2_public_key_oom(dev, apdev):
|
|
"""WPS and Public Key OOM in M2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
with alloc_fail(dev[0], 1, "wpabuf_alloc_copy;wps_process_pubkey"):
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
# Verify STA NACK's the credential
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_nack_m3(dev, apdev):
|
|
"""WPS and NACK M3"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, config_error='\x01\x23')
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Failure not reported")
|
|
if "msg=7 config_error=291" not in ev:
|
|
raise Exception("Unexpected failure reason: " + ev)
|
|
|
|
def test_wps_ext_proto_nack_m5(dev, apdev):
|
|
"""WPS and NACK M5"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
raw_m4_attrs = attrs
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 from STA")
|
|
msg, m5_attrs, raw_m5_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M5)
|
|
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, config_error='\x01\x24')
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Failure not reported")
|
|
if "msg=9 config_error=292" not in ev:
|
|
raise Exception("Unexpected failure reason: " + ev)
|
|
|
|
def wps_nack_m3(dev, apdev):
|
|
pin = "00000000"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pbc=True)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk, dev_pw_id='\x00\x04')
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
return eap_id, m1_attrs[ATTR_ENROLLEE_NONCE], r_nonce, bssid
|
|
|
|
def test_wps_ext_proto_nack_m3_no_config_error(dev, apdev):
|
|
"""WPS and NACK M3 missing Config Error"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, e_nonce, r_nonce, config_error=None)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_no_e_nonce(dev, apdev):
|
|
"""WPS and NACK M3 missing E-Nonce"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, None, r_nonce)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_e_nonce_mismatch(dev, apdev):
|
|
"""WPS and NACK M3 E-Nonce mismatch"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, 16*'\x00', r_nonce)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_no_r_nonce(dev, apdev):
|
|
"""WPS and NACK M3 missing R-Nonce"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, e_nonce, None)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_r_nonce_mismatch(dev, apdev):
|
|
"""WPS and NACK M3 R-Nonce mismatch"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, e_nonce, 16*'\x00')
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_no_msg_type(dev, apdev):
|
|
"""WPS and NACK M3 no Message Type"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, e_nonce, r_nonce, msg_type=None)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_invalid_msg_type(dev, apdev):
|
|
"""WPS and NACK M3 invalid Message Type"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_nack(eap_id, e_nonce, r_nonce, msg_type=123)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_nack_m3_invalid_attr(dev, apdev):
|
|
"""WPS and NACK M3 invalid attribute"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
attrs = b'\x10\x10\x00'
|
|
msg = build_eap_wsc(1, eap_id, attrs, opcode=WSC_NACK)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_no_e_nonce(dev, apdev):
|
|
"""WPS and ACK M3 missing E-Nonce"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, None, r_nonce)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_e_nonce_mismatch(dev, apdev):
|
|
"""WPS and ACK M3 E-Nonce mismatch"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, 16*'\x00', r_nonce)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_no_r_nonce(dev, apdev):
|
|
"""WPS and ACK M3 missing R-Nonce"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, e_nonce, None)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_r_nonce_mismatch(dev, apdev):
|
|
"""WPS and ACK M3 R-Nonce mismatch"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, e_nonce, 16*'\x00')
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_no_msg_type(dev, apdev):
|
|
"""WPS and ACK M3 no Message Type"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, e_nonce, r_nonce, msg_type=None)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_invalid_msg_type(dev, apdev):
|
|
"""WPS and ACK M3 invalid Message Type"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send NACK to STA")
|
|
msg, attrs = build_ack(eap_id, e_nonce, r_nonce, msg_type=123)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3_invalid_attr(dev, apdev):
|
|
"""WPS and ACK M3 invalid attribute"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send ACK to STA")
|
|
attrs = b'\x10\x10\x00'
|
|
msg = build_eap_wsc(1, eap_id, attrs, opcode=WSC_ACK)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_wps_ext_proto_ack_m3(dev, apdev):
|
|
"""WPS and ACK M3"""
|
|
eap_id, e_nonce, r_nonce, bssid = wps_nack_m3(dev, apdev)
|
|
logger.debug("Send ACK to STA")
|
|
msg, attrs = build_ack(eap_id, e_nonce, r_nonce)
|
|
send_wsc_msg(dev[0], bssid, msg)
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def wps_to_m3_helper(dev, apdev):
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
wps_ext_eap_wsc(dev[0], hapd, bssid, "EAP-WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Receive M1 from STA")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M1)
|
|
eap_id = (msg['eap_identifier'] + 1) % 256
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(m1_attrs[ATTR_PUBLIC_KEY], own_private,
|
|
mac_addr, m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, pin,
|
|
m1_attrs[ATTR_PUBLIC_KEY],
|
|
e_pk)
|
|
|
|
logger.debug("Send M2 to STA")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, eap_id,
|
|
m1_attrs[ATTR_ENROLLEE_NONCE],
|
|
r_nonce, uuid_r, e_pk)
|
|
send_wsc_msg(dev[0], bssid, m2)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M3 from STA")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M3)
|
|
return eap_id, m1_attrs, r_nonce, bssid, r_hash1, r_hash2, r_s1, r_s2, raw_m3_attrs, authkey, keywrapkey
|
|
|
|
def wps_to_m3(dev, apdev):
|
|
eap_id, m1_attrs, r_nonce, bssid, r_hash1, r_hash2, r_s1, r_s2, raw_m3_attrs, authkey, keywrapkey = wps_to_m3_helper(dev, apdev)
|
|
return eap_id, m1_attrs[ATTR_ENROLLEE_NONCE], r_nonce, bssid, r_hash1, r_hash2, r_s1, raw_m3_attrs, authkey, keywrapkey
|
|
|
|
def wps_to_m5(dev, apdev):
|
|
eap_id, m1_attrs, r_nonce, bssid, r_hash1, r_hash2, r_s1, r_s2, raw_m3_attrs, authkey, keywrapkey = wps_to_m3_helper(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, m1_attrs[ATTR_ENROLLEE_NONCE])
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
raw_m4_attrs = attrs
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 from STA")
|
|
msg, m5_attrs, raw_m5_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M5)
|
|
|
|
return eap_id, m1_attrs[ATTR_ENROLLEE_NONCE], r_nonce, bssid, r_hash1, r_hash2, r_s2, raw_m5_attrs, authkey, keywrapkey
|
|
|
|
def test_wps_ext_proto_m4_missing_r_hash1(dev, apdev):
|
|
"""WPS and no R-Hash1 in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
#attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m4_missing_r_hash2(dev, apdev):
|
|
"""WPS and no R-Hash2 in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
#attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m4_missing_r_snonce1(dev, apdev):
|
|
"""WPS and no R-SNonce1 in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
#data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
data = b''
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m4_invalid_pad_string(dev, apdev):
|
|
"""WPS and invalid pad string in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
|
|
m = hmac.new(authkey, data, hashlib.sha256)
|
|
kwa = m.digest()[0:8]
|
|
data += build_wsc_attr(ATTR_KEY_WRAP_AUTH, kwa)
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = (pad_len - 1) * struct.pack('B', pad_len) + struct.pack('B', pad_len - 1)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
attrs += build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m4_invalid_pad_value(dev, apdev):
|
|
"""WPS and invalid pad value in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
|
|
m = hmac.new(authkey, data, hashlib.sha256)
|
|
kwa = m.digest()[0:8]
|
|
data += build_wsc_attr(ATTR_KEY_WRAP_AUTH, kwa)
|
|
iv = 16*b'\x99'
|
|
aes = AES.new(keywrapkey, AES.MODE_CBC, iv)
|
|
pad_len = 16 - len(data) % 16
|
|
ps = (pad_len - 1) * struct.pack('B', pad_len) + struct.pack('B', 255)
|
|
data += ps
|
|
wrapped = aes.encrypt(data)
|
|
attrs += build_wsc_attr(ATTR_ENCR_SETTINGS, iv + wrapped)
|
|
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m4_no_encr_settings(dev, apdev):
|
|
"""WPS and no Encr Settings in M4"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s1, m3, authkey, keywrapkey = wps_to_m3(dev, apdev)
|
|
|
|
logger.debug("Send M4 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
attrs += build_attr_authenticator(authkey, m3, attrs)
|
|
m4 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m4)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M5 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m6_missing_r_snonce2(dev, apdev):
|
|
"""WPS and no R-SNonce2 in M6"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s2, m5, authkey, keywrapkey = wps_to_m5(dev, apdev)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
#data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
data = b''
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m5, attrs)
|
|
m6 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m6)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M7 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m6_no_encr_settings(dev, apdev):
|
|
"""WPS and no Encr Settings in M6"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s2, m5, authkey, keywrapkey = wps_to_m5(dev, apdev)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
#attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m5, attrs)
|
|
m6 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m6)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M7 (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_proto_m8_no_encr_settings(dev, apdev):
|
|
"""WPS and no Encr Settings in M6"""
|
|
eap_id, e_nonce, r_nonce, bssid, r_hash1, r_hash2, r_s2, m5, authkey, keywrapkey = wps_to_m5(dev, apdev)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, m5, attrs)
|
|
raw_m6_attrs = attrs
|
|
m6 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m6)
|
|
eap_id = (eap_id + 1) % 256
|
|
|
|
logger.debug("Receive M7 from STA")
|
|
msg, m7_attrs, raw_m7_attrs = recv_wsc_msg(dev[0], WSC_MSG, WPS_M7)
|
|
|
|
logger.debug("Send M8 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M8)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
#attrs += build_attr_encr_settings(authkey, keywrapkey, m8_cred)
|
|
attrs += build_attr_authenticator(authkey, raw_m7_attrs, attrs)
|
|
raw_m8_attrs = attrs
|
|
m8 = build_eap_wsc(1, eap_id, attrs)
|
|
send_wsc_msg(dev[0], bssid, m8)
|
|
|
|
logger.debug("Receive WSC_Done (NACK) from STA")
|
|
msg = get_wsc_msg(dev[0])
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_Nack")
|
|
|
|
dev[0].request("WPS_CANCEL")
|
|
send_wsc_msg(dev[0], bssid, build_eap_failure(eap_id))
|
|
dev[0].wait_disconnected()
|
|
|
|
def wps_start_ext_reg(apdev, dev):
|
|
addr = dev.own_addr()
|
|
bssid = apdev['bssid']
|
|
ssid = "test-wps-conf"
|
|
appin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"ap_pin": appin}
|
|
hapd = hostapd.add_ap(apdev, params)
|
|
|
|
dev.scan_for_bss(bssid, freq="2412")
|
|
hapd.request("SET ext_eapol_frame_io 1")
|
|
dev.request("SET ext_eapol_frame_io 1")
|
|
|
|
dev.request("WPS_REG " + bssid + " " + appin)
|
|
|
|
return addr, bssid, hapd
|
|
|
|
def wps_run_ap_settings_proto(dev, apdev, ap_settings, success):
|
|
addr, bssid, hapd = wps_start_ext_reg(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive M1 from AP")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M1)
|
|
mac_addr = m1_attrs[ATTR_MAC_ADDR]
|
|
e_nonce = m1_attrs[ATTR_ENROLLEE_NONCE]
|
|
e_pk = m1_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
appin = '12345670'
|
|
uuid_r = 16*b'\x33'
|
|
r_nonce = 16*b'\x44'
|
|
own_private, r_pk = wsc_dh_init()
|
|
authkey, keywrapkey = wsc_dh_kdf(e_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
r_s1, r_s2, r_hash1, r_hash2 = wsc_dev_pw_hash(authkey, appin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M2 to AP")
|
|
m2, raw_m2_attrs = build_m2(authkey, raw_m1_attrs, msg['eap_identifier'],
|
|
e_nonce, r_nonce, uuid_r, r_pk, eap_code=2)
|
|
send_wsc_msg(hapd, addr, m2)
|
|
|
|
logger.debug("Receive M3 from AP")
|
|
msg, m3_attrs, raw_m3_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M3)
|
|
|
|
logger.debug("Send M4 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M4)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_R_HASH1, r_hash1)
|
|
attrs += build_wsc_attr(ATTR_R_HASH2, r_hash2)
|
|
data = build_wsc_attr(ATTR_R_SNONCE1, r_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m3_attrs, attrs)
|
|
raw_m4_attrs = attrs
|
|
m4 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m4)
|
|
|
|
logger.debug("Receive M5 from AP")
|
|
msg, m5_attrs, raw_m5_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M5)
|
|
|
|
logger.debug("Send M6 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M6)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
data = build_wsc_attr(ATTR_R_SNONCE2, r_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m5_attrs, attrs)
|
|
raw_m6_attrs = attrs
|
|
m6 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m6)
|
|
|
|
logger.debug("Receive M7 from AP")
|
|
msg, m7_attrs, raw_m7_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M7)
|
|
|
|
logger.debug("Send M8 to STA")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M8)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
if ap_settings:
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, ap_settings)
|
|
attrs += build_attr_authenticator(authkey, raw_m7_attrs, attrs)
|
|
raw_m8_attrs = attrs
|
|
m8 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m8)
|
|
|
|
if success:
|
|
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("New AP settings not reported")
|
|
logger.debug("Receive WSC_Done from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Done:
|
|
raise Exception("Unexpected message - expected WSC_Done")
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
ack, attrs = build_ack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
eap_code=2)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
dev[0].wait_disconnected()
|
|
else:
|
|
ev = hapd.wait_event(["WPS-FAIL"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("WPS failure not reported")
|
|
logger.debug("Receive WSC_NACK from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_NACK")
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
eap_code=2)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_wps_ext_ap_settings_success(dev, apdev):
|
|
"""WPS and AP Settings: success"""
|
|
ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
|
|
ap_settings += build_wsc_attr(ATTR_SSID, "test")
|
|
ap_settings += build_wsc_attr(ATTR_AUTH_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_ENCR_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_NETWORK_KEY, '')
|
|
ap_settings += build_wsc_attr(ATTR_MAC_ADDR, binascii.unhexlify(apdev[0]['bssid'].replace(':', '')))
|
|
wps_run_ap_settings_proto(dev, apdev, ap_settings, True)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_ap_settings_missing(dev, apdev):
|
|
"""WPS and AP Settings: missing"""
|
|
wps_run_ap_settings_proto(dev, apdev, None, False)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_ap_settings_mac_addr_mismatch(dev, apdev):
|
|
"""WPS and AP Settings: MAC Address mismatch"""
|
|
ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
|
|
ap_settings += build_wsc_attr(ATTR_SSID, "test")
|
|
ap_settings += build_wsc_attr(ATTR_AUTH_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_ENCR_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_NETWORK_KEY, '')
|
|
ap_settings += build_wsc_attr(ATTR_MAC_ADDR, '\x00\x00\x00\x00\x00\x00')
|
|
wps_run_ap_settings_proto(dev, apdev, ap_settings, True)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_ap_settings_mac_addr_missing(dev, apdev):
|
|
"""WPS and AP Settings: missing MAC Address"""
|
|
ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
|
|
ap_settings += build_wsc_attr(ATTR_SSID, "test")
|
|
ap_settings += build_wsc_attr(ATTR_AUTH_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_ENCR_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_NETWORK_KEY, '')
|
|
wps_run_ap_settings_proto(dev, apdev, ap_settings, False)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_ap_settings_reject_encr_type(dev, apdev):
|
|
"""WPS and AP Settings: reject Encr Type"""
|
|
ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
|
|
ap_settings += build_wsc_attr(ATTR_SSID, "test")
|
|
ap_settings += build_wsc_attr(ATTR_AUTH_TYPE, '\x00\x01')
|
|
ap_settings += build_wsc_attr(ATTR_ENCR_TYPE, '\x00\x00')
|
|
ap_settings += build_wsc_attr(ATTR_NETWORK_KEY, '')
|
|
ap_settings += build_wsc_attr(ATTR_MAC_ADDR, binascii.unhexlify(apdev[0]['bssid'].replace(':', '')))
|
|
wps_run_ap_settings_proto(dev, apdev, ap_settings, False)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_ap_settings_m2d(dev, apdev):
|
|
"""WPS and AP Settings: M2D"""
|
|
addr, bssid, hapd = wps_start_ext_reg(apdev[0], dev[0])
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive M1 from AP")
|
|
msg, m1_attrs, raw_m1_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M1)
|
|
e_nonce = m1_attrs[ATTR_ENROLLEE_NONCE]
|
|
|
|
r_nonce = 16*'\x44'
|
|
uuid_r = 16*'\x33'
|
|
|
|
logger.debug("Send M2D to AP")
|
|
m2d, raw_m2d_attrs = build_m2d(raw_m1_attrs, msg['eap_identifier'],
|
|
e_nonce, r_nonce, uuid_r,
|
|
dev_pw_id='\x00\x00', eap_code=2)
|
|
send_wsc_msg(hapd, addr, m2d)
|
|
|
|
ev = hapd.wait_event(["WPS-M2D"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("M2D not reported")
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
def wps_wait_ap_nack(hapd, dev, e_nonce, r_nonce):
|
|
logger.debug("Receive WSC_NACK from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_NACK:
|
|
raise Exception("Unexpected message - expected WSC_NACK")
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
eap_code=2)
|
|
send_wsc_msg(hapd, dev.own_addr(), nack)
|
|
dev.wait_disconnected()
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_missing_e_hash1(dev, apdev):
|
|
"""WPS proto: M3 missing E-Hash1"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
#attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_missing_e_hash2(dev, apdev):
|
|
"""WPS proto: M3 missing E-Hash2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
#attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m5_missing_e_snonce1(dev, apdev):
|
|
"""WPS proto: M5 missing E-SNonce1"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
#data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
data = b''
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m5_e_snonce1_mismatch(dev, apdev):
|
|
"""WPS proto: M5 E-SNonce1 mismatch"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, 16*'\x00')
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
def test_wps_ext_m7_missing_e_snonce2(dev, apdev):
|
|
"""WPS proto: M7 missing E-SNonce2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
logger.debug("Receive M6 from AP")
|
|
msg, m6_attrs, raw_m6_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M6)
|
|
|
|
logger.debug("Send M7 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
#data = build_wsc_attr(ATTR_E_SNONCE2, e_s2)
|
|
data = b''
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m6_attrs, attrs)
|
|
m7 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
raw_m7_attrs = attrs
|
|
send_wsc_msg(hapd, addr, m7)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m7_e_snonce2_mismatch(dev, apdev):
|
|
"""WPS proto: M7 E-SNonce2 mismatch"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
logger.debug("Receive M6 from AP")
|
|
msg, m6_attrs, raw_m6_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M6)
|
|
|
|
logger.debug("Send M7 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE2, 16*'\x00')
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m6_attrs, attrs)
|
|
m7 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
raw_m7_attrs = attrs
|
|
send_wsc_msg(hapd, addr, m7)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m1_pubkey_oom(dev, apdev):
|
|
"""WPS proto: M1 PubKey OOM"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*'\x11'
|
|
e_nonce = 16*'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
with alloc_fail(hapd, 1, "wpabuf_alloc_copy;wps_process_pubkey"):
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
def wps_wait_eap_failure(hapd, dev):
|
|
ev = hapd.wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("EAP-Failure not reported")
|
|
dev.wait_disconnected()
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_m1(dev, apdev):
|
|
"""WPS proto: M3 replaced with M1"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3(M1) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M1)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m5_m3(dev, apdev):
|
|
"""WPS proto: M5 replaced with M3"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5(M3) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_m2(dev, apdev):
|
|
"""WPS proto: M3 replaced with M2"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3(M2) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M2)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_m5(dev, apdev):
|
|
"""WPS proto: M3 replaced with M5"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3(M5) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_m7(dev, apdev):
|
|
"""WPS proto: M3 replaced with M7"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3(M7) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m3_done(dev, apdev):
|
|
"""WPS proto: M3 replaced with WSC_Done"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3(WSC_Done) to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_WSC_DONE)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_nack_invalid(dev, apdev):
|
|
"""WPS proto: M2 followed by invalid NACK"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
attrs = b'\x10\x00\x00'
|
|
nack = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_NACK)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_nack_no_msg_type(dev, apdev):
|
|
"""WPS proto: M2 followed by NACK without Msg Type"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
msg_type=None, eap_code=2)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_nack_invalid_msg_type(dev, apdev):
|
|
"""WPS proto: M2 followed by NACK with invalid Msg Type"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
msg_type=WPS_WSC_ACK, eap_code=2)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_nack_e_nonce_mismatch(dev, apdev):
|
|
"""WPS proto: M2 followed by NACK with e-nonce mismatch"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], 16*b'\x00', r_nonce,
|
|
eap_code=2)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_nack_no_config_error(dev, apdev):
|
|
"""WPS proto: M2 followed by NACK without Config Error"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_NACK to AP")
|
|
nack, attrs = build_nack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
config_error=None, eap_code=2)
|
|
send_wsc_msg(hapd, addr, nack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_ack_invalid(dev, apdev):
|
|
"""WPS proto: M2 followed by invalid ACK"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
attrs = b'\x10\x00\x00'
|
|
ack = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_ACK)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_ack(dev, apdev):
|
|
"""WPS proto: M2 followed by ACK"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
ack, attrs = build_ack(msg['eap_identifier'], e_nonce, r_nonce, eap_code=2)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_ack_no_msg_type(dev, apdev):
|
|
"""WPS proto: M2 followed by ACK missing Msg Type"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
ack, attrs = build_ack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
msg_type=None, eap_code=2)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_ack_invalid_msg_type(dev, apdev):
|
|
"""WPS proto: M2 followed by ACK with invalid Msg Type"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
ack, attrs = build_ack(msg['eap_identifier'], e_nonce, r_nonce,
|
|
msg_type=WPS_WSC_NACK, eap_code=2)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m2_ack_e_nonce_mismatch(dev, apdev):
|
|
"""WPS proto: M2 followed by ACK with e-nonce mismatch"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send WSC_ACK to AP")
|
|
ack, attrs = build_ack(msg['eap_identifier'], 16*b'\x00', r_nonce,
|
|
eap_code=2)
|
|
send_wsc_msg(hapd, addr, ack)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m1_invalid(dev, apdev):
|
|
"""WPS proto: M1 failing parsing"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
logger.debug("Send M1 to AP")
|
|
attrs = b'\x10\x00\x00'
|
|
m1 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
def test_wps_ext_m1_missing_msg_type(dev, apdev):
|
|
"""WPS proto: M1 missing Msg Type"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
logger.debug("Send M1 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
m1 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], 16*b'\x00', 16*b'\x00')
|
|
|
|
def wps_ext_wsc_done(dev, apdev):
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
logger.debug("Receive M6 from AP")
|
|
msg, m6_attrs, raw_m6_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M6)
|
|
|
|
logger.debug("Send M7 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE2, e_s2)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m6_attrs, attrs)
|
|
m7 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
raw_m7_attrs = attrs
|
|
send_wsc_msg(hapd, addr, m7)
|
|
|
|
logger.debug("Receive M8 from AP")
|
|
msg, m8_attrs, raw_m8_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M8)
|
|
return hapd, msg, e_nonce, r_nonce
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_wsc_done_invalid(dev, apdev):
|
|
"""WPS proto: invalid WSC_Done"""
|
|
hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
attrs = b'\x10\x00\x00'
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, dev[0].own_addr(), wsc_done)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_wsc_done_no_msg_type(dev, apdev):
|
|
"""WPS proto: invalid WSC_Done"""
|
|
hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
#attrs += build_attr_msg_type(WPS_WSC_DONE)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, dev[0].own_addr(), wsc_done)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_wsc_done_wrong_msg_type(dev, apdev):
|
|
"""WPS proto: WSC_Done with wrong Msg Type"""
|
|
hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_WSC_ACK)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, dev[0].own_addr(), wsc_done)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_wsc_done_no_e_nonce(dev, apdev):
|
|
"""WPS proto: WSC_Done without e_nonce"""
|
|
hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_WSC_DONE)
|
|
#attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, dev[0].own_addr(), wsc_done)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
def test_wps_ext_wsc_done_no_r_nonce(dev, apdev):
|
|
"""WPS proto: WSC_Done without r_nonce"""
|
|
hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
|
|
|
|
logger.debug("Send WSC_Done to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_WSC_DONE)
|
|
attrs += build_wsc_attr(ATTR_ENROLLEE_NONCE, e_nonce)
|
|
#attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
wsc_done = build_eap_wsc(2, msg['eap_identifier'], attrs, opcode=WSC_Done)
|
|
send_wsc_msg(hapd, dev[0].own_addr(), wsc_done)
|
|
|
|
wps_wait_eap_failure(hapd, dev[0])
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m7_no_encr_settings(dev, apdev):
|
|
"""WPS proto: M7 without Encr Settings"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk)
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
r_nonce = m2_attrs[ATTR_REGISTRAR_NONCE]
|
|
r_pk = m2_attrs[ATTR_PUBLIC_KEY]
|
|
|
|
authkey, keywrapkey = wsc_dh_kdf(r_pk, own_private, mac_addr, e_nonce,
|
|
r_nonce)
|
|
e_s1, e_s2, e_hash1, e_hash2 = wsc_dev_pw_hash(authkey, pin, e_pk, r_pk)
|
|
|
|
logger.debug("Send M3 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M3)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
attrs += build_wsc_attr(ATTR_E_HASH1, e_hash1)
|
|
attrs += build_wsc_attr(ATTR_E_HASH2, e_hash2)
|
|
attrs += build_attr_authenticator(authkey, raw_m2_attrs, attrs)
|
|
raw_m3_attrs = attrs
|
|
m3 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m3)
|
|
|
|
logger.debug("Receive M4 from AP")
|
|
msg, m4_attrs, raw_m4_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M4)
|
|
|
|
logger.debug("Send M5 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M5)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
data = build_wsc_attr(ATTR_E_SNONCE1, e_s1)
|
|
attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m4_attrs, attrs)
|
|
raw_m5_attrs = attrs
|
|
m5 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
send_wsc_msg(hapd, addr, m5)
|
|
|
|
logger.debug("Receive M6 from AP")
|
|
msg, m6_attrs, raw_m6_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M6)
|
|
|
|
logger.debug("Send M7 to AP")
|
|
attrs = build_wsc_attr(ATTR_VERSION, '\x10')
|
|
attrs += build_attr_msg_type(WPS_M7)
|
|
attrs += build_wsc_attr(ATTR_REGISTRAR_NONCE, r_nonce)
|
|
#data = build_wsc_attr(ATTR_E_SNONCE2, e_s2)
|
|
#attrs += build_attr_encr_settings(authkey, keywrapkey, data)
|
|
attrs += build_attr_authenticator(authkey, raw_m6_attrs, attrs)
|
|
m7 = build_eap_wsc(2, msg['eap_identifier'], attrs)
|
|
raw_m7_attrs = attrs
|
|
send_wsc_msg(hapd, addr, m7)
|
|
|
|
wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
|
|
|
|
@remote_compatible
|
|
def test_wps_ext_m1_workaround(dev, apdev):
|
|
"""WPS proto: M1 Manufacturer/Model workaround"""
|
|
pin = "12345670"
|
|
addr, bssid, hapd = wps_start_ext(apdev[0], dev[0], pin=pin)
|
|
wps_ext_eap_identity_req(dev[0], hapd, bssid)
|
|
wps_ext_eap_identity_resp(hapd, dev[0], addr)
|
|
|
|
logger.debug("Receive WSC/Start from AP")
|
|
msg = get_wsc_msg(hapd)
|
|
if msg['wsc_opcode'] != WSC_Start:
|
|
raise Exception("Unexpected Op-Code for WSC/Start")
|
|
|
|
mac_addr = binascii.unhexlify(dev[0].own_addr().replace(':', ''))
|
|
uuid_e = 16*b'\x11'
|
|
e_nonce = 16*b'\x22'
|
|
own_private, e_pk = wsc_dh_init()
|
|
|
|
logger.debug("Send M1 to AP")
|
|
m1, raw_m1_attrs = build_m1(msg['eap_identifier'], uuid_e, mac_addr,
|
|
e_nonce, e_pk, manufacturer='Apple TEST',
|
|
model_name='AirPort', config_methods=b'\xff\xff')
|
|
send_wsc_msg(hapd, addr, m1)
|
|
|
|
logger.debug("Receive M2 from AP")
|
|
msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_disable_enable(dev, apdev):
|
|
"""WPS and DISABLE/ENABLE AP"""
|
|
hapd = wps_start_ap(apdev[0])
|
|
hapd.disable()
|
|
hapd.enable()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
|
|
def test_ap_wps_upnp_web_oom(dev, apdev, params):
|
|
"""hostapd WPS UPnP web OOM"""
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
hapd = add_ssdp_ap(apdev[0], ap_uuid)
|
|
|
|
location = ssdp_get_location(ap_uuid)
|
|
url = urlparse(location)
|
|
urls = upnp_get_urls(location)
|
|
eventurl = urlparse(urls['event_sub_url'])
|
|
ctrlurl = urlparse(urls['control_url'])
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
with alloc_fail(hapd, 1, "web_connection_parse_get"):
|
|
conn.request("GET", "/wps_device.xml")
|
|
try:
|
|
resp = conn.getresponse()
|
|
except:
|
|
pass
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("GET", "/unknown")
|
|
resp = conn.getresponse()
|
|
if resp.status != 404:
|
|
raise Exception("Unexpected HTTP result for unknown URL: %d" + resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "web_connection_parse_get"):
|
|
conn.request("GET", "/unknown")
|
|
try:
|
|
resp = conn.getresponse()
|
|
print(resp.status)
|
|
except:
|
|
pass
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("GET", "/wps_device.xml")
|
|
resp = conn.getresponse()
|
|
if resp.status != 200:
|
|
raise Exception("GET /wps_device.xml failed")
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
if resp.status != 200:
|
|
raise Exception("GetDeviceInfo failed")
|
|
|
|
with alloc_fail(hapd, 1, "web_process_get_device_info"):
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
if resp.status != 500:
|
|
raise Exception("Internal error not reported from GetDeviceInfo OOM")
|
|
|
|
with alloc_fail(hapd, 1, "wps_build_m1;web_process_get_device_info"):
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
if resp.status != 500:
|
|
raise Exception("Internal error not reported from GetDeviceInfo OOM")
|
|
|
|
with alloc_fail(hapd, 1, "wpabuf_alloc;web_connection_send_reply"):
|
|
conn = HTTPConnection(url.netloc)
|
|
try:
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
except:
|
|
pass
|
|
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "GetDeviceInfo")
|
|
if resp.status != 200:
|
|
raise Exception("GetDeviceInfo failed")
|
|
|
|
# No NewWLANEventType in PutWLANResponse NewMessage
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse", newmsg="foo")
|
|
if resp.status != 600:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
# No NewWLANEventMAC in PutWLANResponse NewMessage
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse",
|
|
newmsg="foo", neweventtype="1")
|
|
if resp.status != 600:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
# Invalid NewWLANEventMAC in PutWLANResponse NewMessage
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse",
|
|
newmsg="foo", neweventtype="1",
|
|
neweventmac="foo")
|
|
if resp.status != 600:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
# Workaround for NewWLANEventMAC in PutWLANResponse NewMessage
|
|
# Ignored unexpected PutWLANResponse WLANEventType 1
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse",
|
|
newmsg="foo", neweventtype="1",
|
|
neweventmac="00.11.22.33.44.55")
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
# PutWLANResponse NewMessage with invalid EAP message
|
|
conn = HTTPConnection(url.netloc)
|
|
resp = upnp_soap_action(conn, ctrlurl.path, "PutWLANResponse",
|
|
newmsg="foo", neweventtype="2",
|
|
neweventmac="00:11:22:33:44:55")
|
|
if resp.status != 200:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "web_connection_parse_subscribe"):
|
|
conn = HTTPConnection(url.netloc)
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except:
|
|
pass
|
|
|
|
with alloc_fail(hapd, 1, "dup_binstr;web_connection_parse_subscribe"):
|
|
conn = HTTPConnection(url.netloc)
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("SUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
resp = conn.getresponse()
|
|
if resp.status != 500:
|
|
raise Exception("Unexpected HTTP response: %d" % resp.status)
|
|
|
|
with alloc_fail(hapd, 1, "wpabuf_alloc;web_connection_parse_unsubscribe"):
|
|
conn = HTTPConnection(url.netloc)
|
|
headers = {"callback": '<http://127.0.0.1:12345/event>',
|
|
"NT": "upnp:event",
|
|
"timeout": "Second-1234"}
|
|
conn.request("UNSUBSCRIBE", eventurl.path, "\r\n\r\n", headers)
|
|
try:
|
|
resp = conn.getresponse()
|
|
except:
|
|
pass
|
|
|
|
with alloc_fail(hapd, 1, "web_connection_unimplemented"):
|
|
conn = HTTPConnection(url.netloc)
|
|
conn.request("HEAD", "/wps_device.xml")
|
|
try:
|
|
resp = conn.getresponse()
|
|
except:
|
|
pass
|
|
|
|
def test_ap_wps_frag_ack_oom(dev, apdev):
|
|
"""WPS and fragment ack OOM"""
|
|
dev[0].request("SET wps_fragment_size 50")
|
|
hapd = wps_start_ap(apdev[0])
|
|
with alloc_fail(hapd, 1, "eap_wsc_build_frag_ack"):
|
|
wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
|
|
|
|
def wait_scan_stopped(dev):
|
|
dev.request("ABORT_SCAN")
|
|
for i in range(50):
|
|
res = dev.get_driver_status_field("scan_state")
|
|
if "SCAN_STARTED" not in res and "SCAN_REQUESTED" not in res:
|
|
break
|
|
logger.debug("Waiting for scan to complete")
|
|
time.sleep(0.1)
|
|
|
|
@remote_compatible
|
|
def test_ap_wps_eap_wsc_errors(dev, apdev):
|
|
"""WPS and EAP-WSC error cases"""
|
|
ssid = "test-wps-conf-pin"
|
|
appin = "12345670"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"fragment_size": "300", "ap_pin": appin}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].wps_reg(bssid, appin + " new_ssid=a", "new ssid", "WPA2PSK", "CCMP",
|
|
"new passphrase", no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL not reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].wps_reg(bssid, appin, "new ssid", "FOO", "CCMP",
|
|
"new passphrase", no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL not reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].wps_reg(bssid, appin, "new ssid", "WPA2PSK", "FOO",
|
|
"new passphrase", no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL not reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].wps_reg(bssid, appin + "new_key=a", "new ssid", "WPA2PSK", "CCMP",
|
|
"new passphrase", no_wait=True)
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL not reported")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
tests = ["eap_wsc_init",
|
|
"eap_msg_alloc;eap_wsc_build_msg",
|
|
"wpabuf_alloc;eap_wsc_process_fragment"]
|
|
for func in tests:
|
|
with alloc_fail(dev[0], 1, func):
|
|
dev[0].request("WPS_PIN %s %s" % (bssid, pin))
|
|
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
tests = [(1, "wps_decrypt_encr_settings"),
|
|
(2, "hmac_sha256;wps_derive_psk")]
|
|
for count, func in tests:
|
|
hapd.request("WPS_PIN any " + pin)
|
|
with fail_test(dev[0], count, func):
|
|
dev[0].request("WPS_PIN %s %s" % (bssid, pin))
|
|
wait_fail_trigger(dev[0], "GET_FAIL")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
with alloc_fail(dev[0], 1, "eap_msg_alloc;eap_sm_build_expanded_nak"):
|
|
dev[0].wps_reg(bssid, appin + " new_ssid=a", "new ssid", "WPA2PSK",
|
|
"CCMP", "new passphrase", no_wait=True)
|
|
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
|
|
dev[0].request("WPS_CANCEL")
|
|
dev[0].wait_disconnected()
|
|
wait_scan_stopped(dev[0])
|
|
dev[0].dump_monitor()
|
|
|
|
def test_ap_wps_eap_wsc(dev, apdev):
|
|
"""WPS and EAP-WSC in network profile"""
|
|
params = int_eap_server_params()
|
|
params["wps_state"] = "2"
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = apdev[0]['bssid']
|
|
|
|
logger.info("Unexpected identity")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-unexpected",
|
|
wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("No phase1 parameter")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("No PIN/PBC in phase1")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
phase1="foo", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("Invalid pkhash in phase1")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
phase1="foo pkhash=q pbc=1", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("Zero fragment_size")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
fragment_size="0", phase1="pin=12345670", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["WPS-M2D"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No M2D seen")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("Missing new_auth")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
phase1="pin=12345670 new_ssid=aa", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("Missing new_encr")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
phase1="pin=12345670 new_auth=WPA2PSK new_ssid=aa", wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
logger.info("Missing new_key")
|
|
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", scan_freq="2412",
|
|
eap="WSC", identity="WFA-SimpleConfig-Enrollee-1-0",
|
|
phase1="pin=12345670 new_auth=WPA2PSK new_ssid=aa new_encr=CCMP",
|
|
wait_connect=False)
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("Timeout on EAP method start")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
|
|
if ev is None:
|
|
raise Exception("No EAP-Failure seen")
|
|
dev[0].request("REMOVE_NETWORK all")
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_ap_wps_and_bss_limit(dev, apdev):
|
|
"""WPS and wpa_supplicant BSS entry limit"""
|
|
try:
|
|
_test_ap_wps_and_bss_limit(dev, apdev)
|
|
finally:
|
|
dev[0].request("SET bss_max_count 200")
|
|
pass
|
|
|
|
def _test_ap_wps_and_bss_limit(dev, apdev):
|
|
params = {"ssid": "test-wps", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
params = {"ssid": "test-wps-2", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "1234567890", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
|
|
id = dev[1].add_network()
|
|
dev[1].set_network(id, "mode", "2")
|
|
dev[1].set_network_quoted(id, "ssid", "wpas-ap-no-wps")
|
|
dev[1].set_network_quoted(id, "psk", "12345678")
|
|
dev[1].set_network(id, "frequency", "2462")
|
|
dev[1].set_network(id, "scan_freq", "2462")
|
|
dev[1].set_network(id, "wps_disabled", "1")
|
|
dev[1].select_network(id)
|
|
|
|
id = dev[2].add_network()
|
|
dev[2].set_network(id, "mode", "2")
|
|
dev[2].set_network_quoted(id, "ssid", "wpas-ap")
|
|
dev[2].set_network_quoted(id, "psk", "12345678")
|
|
dev[2].set_network(id, "frequency", "2437")
|
|
dev[2].set_network(id, "scan_freq", "2437")
|
|
dev[2].select_network(id)
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
id = wpas.add_network()
|
|
wpas.set_network(id, "mode", "2")
|
|
wpas.set_network_quoted(id, "ssid", "wpas-ap")
|
|
wpas.set_network_quoted(id, "psk", "12345678")
|
|
wpas.set_network(id, "frequency", "2437")
|
|
wpas.set_network(id, "scan_freq", "2437")
|
|
wpas.select_network(id)
|
|
|
|
dev[1].wait_connected()
|
|
dev[2].wait_connected()
|
|
wpas.wait_connected()
|
|
wpas.request("WPS_PIN any 12345670")
|
|
|
|
hapd.request("WPS_PBC")
|
|
hapd2.request("WPS_PBC")
|
|
|
|
dev[0].request("SET bss_max_count 1")
|
|
|
|
id = dev[0].add_network()
|
|
dev[0].set_network_quoted(id, "ssid", "testing")
|
|
|
|
id = dev[0].add_network()
|
|
dev[0].set_network_quoted(id, "ssid", "testing")
|
|
dev[0].set_network(id, "key_mgmt", "WPS")
|
|
|
|
dev[0].request("WPS_PBC")
|
|
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
|
|
dev[0].request("WPS_CANCEL")
|
|
|
|
id = dev[0].add_network()
|
|
dev[0].set_network_quoted(id, "ssid", "testing")
|
|
dev[0].set_network(id, "key_mgmt", "WPS")
|
|
|
|
dev[0].scan(freq="2412")
|
|
|
|
def test_ap_wps_pbc_2ap(dev, apdev):
|
|
"""WPS PBC with two APs advertising same SSID"""
|
|
params = {"ssid": "wps", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
params = {"ssid": "wps", "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "123456789", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_independent": "1"}
|
|
hapd2 = hostapd.add_ap(apdev[1], params)
|
|
hapd.request("WPS_PBC")
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
|
|
wpas.dump_monitor()
|
|
wpas.flush_scan_cache()
|
|
|
|
wpas.scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
wpas.scan_for_bss(apdev[1]['bssid'], freq="2412")
|
|
wpas.request("WPS_PBC")
|
|
wpas.wait_connected()
|
|
wpas.request("DISCONNECT")
|
|
hapd.request("DISABLE")
|
|
hapd2.request("DISABLE")
|
|
wpas.flush_scan_cache()
|
|
|
|
def test_ap_wps_er_enrollee_to_conf_ap(dev, apdev):
|
|
"""WPS ER enrolling a new device to a configured AP"""
|
|
try:
|
|
_test_ap_wps_er_enrollee_to_conf_ap(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_enrollee_to_conf_ap(dev, apdev):
|
|
ssid = "wps-er-enrollee-to-conf-ap"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
id = dev[0].connect(ssid, psk="12345678", scan_freq="2412")
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
pin = dev[2].wps_read_pin()
|
|
addr2 = dev[2].own_addr()
|
|
dev[0].dump_monitor()
|
|
dev[2].scan_for_bss(bssid, freq=2412)
|
|
dev[2].dump_monitor()
|
|
dev[2].request("WPS_PIN %s %s" % (bssid, pin))
|
|
|
|
for i in range(3):
|
|
ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Enrollee not seen")
|
|
if addr2 in ev:
|
|
break
|
|
if addr2 not in ev:
|
|
raise Exception("Unexpected Enrollee MAC address")
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].request("WPS_ER_SET_CONFIG " + ap_uuid + " " + str(id))
|
|
dev[0].request("WPS_ER_PIN " + addr2 + " " + pin + " " + addr2)
|
|
dev[2].wait_connected(timeout=30)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
def test_ap_wps_er_enrollee_to_conf_ap2(dev, apdev):
|
|
"""WPS ER enrolling a new device to a configured AP (2)"""
|
|
try:
|
|
_test_ap_wps_er_enrollee_to_conf_ap2(dev, apdev)
|
|
finally:
|
|
dev[0].request("WPS_ER_STOP")
|
|
|
|
def _test_ap_wps_er_enrollee_to_conf_ap2(dev, apdev):
|
|
ssid = "wps-er-enrollee-to-conf-ap"
|
|
ap_pin = "12345670"
|
|
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"device_name": "Wireless AP", "manufacturer": "Company",
|
|
"model_name": "WAP", "model_number": "123",
|
|
"serial_number": "12345", "device_type": "6-0050F204-1",
|
|
"os_version": "01020300",
|
|
"config_methods": "label push_button",
|
|
"ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
|
|
id = dev[0].connect(ssid, psk="12345678", scan_freq="2412")
|
|
dev[0].dump_monitor()
|
|
|
|
dev[0].request("WPS_ER_START ifname=lo")
|
|
ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP discovery timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not found")
|
|
|
|
dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin)
|
|
ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("AP learn timed out")
|
|
if ap_uuid not in ev:
|
|
raise Exception("Expected AP UUID not in settings")
|
|
ev = dev[0].wait_event(["WPS-FAIL"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS-FAIL after AP learn timed out")
|
|
time.sleep(0.1)
|
|
|
|
pin = dev[1].wps_read_pin()
|
|
addr1 = dev[1].own_addr()
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_ER_PIN any " + pin)
|
|
time.sleep(0.1)
|
|
dev[1].scan_for_bss(bssid, freq=2412)
|
|
dev[1].request("WPS_PIN any %s" % pin)
|
|
ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=30)
|
|
if ev is None:
|
|
raise Exception("Enrollee did not report success")
|
|
dev[1].wait_connected(timeout=15)
|
|
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS ER did not report success")
|
|
|
|
def test_ap_wps_ignore_broadcast_ssid(dev, apdev):
|
|
"""WPS AP trying to ignore broadcast SSID"""
|
|
ssid = "test-wps"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"ignore_broadcast_ssid": "1"})
|
|
if "FAIL" not in hapd.request("WPS_PBC"):
|
|
raise Exception("WPS unexpectedly enabled")
|
|
|
|
def test_ap_wps_wep(dev, apdev):
|
|
"""WPS AP trying to enable WEP"""
|
|
check_wep_capa(dev[0])
|
|
ssid = "test-wps"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"ieee80211n": "0", "wep_key0": '"hello"'})
|
|
if "FAIL" not in hapd.request("WPS_PBC"):
|
|
raise Exception("WPS unexpectedly enabled")
|
|
|
|
def test_ap_wps_tkip(dev, apdev):
|
|
"""WPS AP trying to enable TKIP"""
|
|
ssid = "test-wps"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"ieee80211n": "0", "wpa": '1',
|
|
"wpa_key_mgmt": "WPA-PSK",
|
|
"wpa_passphrase": "12345678"})
|
|
if "FAIL" not in hapd.request("WPS_PBC"):
|
|
raise Exception("WPS unexpectedly enabled")
|
|
|
|
def test_ap_wps_conf_dummy_cred(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP using dummy cred"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
hapd.request("WPS_PIN any 12345670")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].dump_monitor()
|
|
try:
|
|
hapd.set("wps_testing_dummy_cred", "1")
|
|
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
|
|
for i in range(1, 3):
|
|
ev = dev[0].wait_event(["WPS-CRED-RECEIVED"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("WPS credential %d not received" % i)
|
|
dev[0].wait_connected(timeout=30)
|
|
finally:
|
|
hapd.set("wps_testing_dummy_cred", "0")
|
|
|
|
def test_ap_wps_rf_bands(dev, apdev):
|
|
"""WPS and wps_rf_bands configuration"""
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"wps_rf_bands": "ag"}
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(bssid, freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + bssid)
|
|
dev[0].wait_connected(timeout=30)
|
|
bss = dev[0].get_bss(bssid)
|
|
logger.info("BSS: " + str(bss))
|
|
if "103c000103" not in bss['ie']:
|
|
raise Exception("RF Bands attribute with expected values not found")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
hapd.set("wps_rf_bands", "ad")
|
|
hapd.set("wps_rf_bands", "a")
|
|
hapd.set("wps_rf_bands", "g")
|
|
hapd.set("wps_rf_bands", "b")
|
|
hapd.set("wps_rf_bands", "ga")
|
|
hapd.disable()
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_pbc_in_m1(dev, apdev):
|
|
"""WPS and pbc_in_m1"""
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
|
|
"config_methods": "virtual_push_button virtual_display",
|
|
"pbc_in_m1": "1"}
|
|
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
bssid = hapd.own_addr()
|
|
hapd.request("WPS_PBC")
|
|
dev[0].scan_for_bss(bssid, freq="2412")
|
|
dev[0].dump_monitor()
|
|
dev[0].request("WPS_PBC " + bssid)
|
|
dev[0].wait_connected(timeout=30)
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
hapd.disable()
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
|
|
def test_ap_wps_pbc_mac_addr_change(dev, apdev, params):
|
|
"""WPS M1 with MAC address change"""
|
|
skip_without_tkip(dev[0])
|
|
ssid = "test-wps-mac-addr-change"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1"})
|
|
hapd.request("WPS_PBC")
|
|
if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"):
|
|
raise Exception("PBC status not shown correctly")
|
|
dev[0].flush_scan_cache()
|
|
|
|
test_addr = '02:11:22:33:44:55'
|
|
addr = dev[0].get_status_field("address")
|
|
if addr == test_addr:
|
|
raise Exception("Unexpected initial MAC address")
|
|
|
|
try:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'down'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'address',
|
|
test_addr])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'up'])
|
|
addr1 = dev[0].get_status_field("address")
|
|
if addr1 != test_addr:
|
|
raise Exception("Failed to change MAC address")
|
|
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['wpa_state'] != 'COMPLETED' or \
|
|
status['bssid'] != apdev[0]['bssid']:
|
|
raise Exception("Not fully connected")
|
|
|
|
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
|
|
"wps.message_type == 0x04",
|
|
display=["wps.mac_address"])
|
|
res = out.splitlines()
|
|
|
|
if len(res) < 1:
|
|
raise Exception("No M1 message with MAC address found")
|
|
if res[0] != addr1:
|
|
raise Exception("Wrong M1 MAC address")
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
hapd.disable()
|
|
dev[0].dump_monitor()
|
|
dev[0].flush_scan_cache()
|
|
finally:
|
|
# Restore MAC address
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'down'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'address',
|
|
addr])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', dev[0].ifname, 'up'])
|
|
|
|
def test_ap_wps_pin_start_failure(dev, apdev):
|
|
"""WPS_PIN start failure"""
|
|
with alloc_fail(dev[0], 1, "wpas_wps_start_dev_pw"):
|
|
if "FAIL" not in dev[0].request("WPS_PIN any 12345670"):
|
|
raise Exception("WPS_PIN not rejected during OOM")
|
|
with alloc_fail(dev[0], 1, "wpas_wps_start_dev_pw"):
|
|
if "FAIL" not in dev[0].request("WPS_PIN any"):
|
|
raise Exception("WPS_PIN not rejected during OOM")
|
|
|
|
def test_ap_wps_ap_pin_failure(dev, apdev):
|
|
"""WPS_AP_PIN failure"""
|
|
id = dev[0].add_network()
|
|
dev[0].set_network(id, "mode", "2")
|
|
dev[0].set_network_quoted(id, "ssid", "wpas-ap-wps")
|
|
dev[0].set_network_quoted(id, "psk", "1234567890")
|
|
dev[0].set_network(id, "frequency", "2412")
|
|
dev[0].set_network(id, "scan_freq", "2412")
|
|
dev[0].select_network(id)
|
|
dev[0].wait_connected()
|
|
|
|
with fail_test(dev[0], 1,
|
|
"os_get_random;wpa_supplicant_ctrl_iface_wps_ap_pin"):
|
|
if "FAIL" not in dev[0].request("WPS_AP_PIN random"):
|
|
raise Exception("WPS_AP_PIN random accepted")
|
|
with alloc_fail(dev[0], 1, "wpas_wps_ap_pin_set"):
|
|
if "FAIL" not in dev[0].request("WPS_AP_PIN set 12345670"):
|
|
raise Exception("WPS_AP_PIN set accepted")
|
|
|
|
dev[0].request("DISCONNECT")
|
|
dev[0].wait_disconnected()
|
|
|
|
def test_ap_wps_random_uuid(dev, apdev, params):
|
|
"""WPS and random UUID on Enrollee"""
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
|
|
config = os.path.join(params['logdir'], 'ap_wps_random_uuid.conf')
|
|
with open(config, "w") as f:
|
|
f.write("auto_uuid=1\n")
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
|
|
uuid = []
|
|
for i in range(3):
|
|
wpas.interface_add("wlan5", config=config)
|
|
|
|
wpas.scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
wpas.dump_monitor()
|
|
wpas.request("WPS_PBC " + apdev[0]['bssid'])
|
|
|
|
ev = hapd.wait_event(["WPS-ENROLLEE-SEEN"], timeout=10)
|
|
if ev is None:
|
|
raise Exception("Enrollee not seen")
|
|
uuid.append(ev.split(' ')[2])
|
|
wpas.request("WPS_CANCEL")
|
|
wpas.dump_monitor()
|
|
|
|
wpas.interface_remove("wlan5")
|
|
|
|
hapd.dump_monitor()
|
|
|
|
logger.info("Seen UUIDs: " + str(uuid))
|
|
if uuid[0] == uuid[1] or uuid[0] == uuid[2] or uuid[1] == uuid[2]:
|
|
raise Exception("Same UUID used multiple times")
|
|
|
|
def test_ap_wps_conf_pin_gcmp_128(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP using GCMP-128"""
|
|
run_ap_wps_conf_pin_cipher(dev, apdev, "GCMP")
|
|
|
|
def test_ap_wps_conf_pin_gcmp_256(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP using GCMP-256"""
|
|
run_ap_wps_conf_pin_cipher(dev, apdev, "GCMP-256")
|
|
|
|
def test_ap_wps_conf_pin_ccmp_256(dev, apdev):
|
|
"""WPS PIN provisioning with configured AP using CCMP-256"""
|
|
run_ap_wps_conf_pin_cipher(dev, apdev, "CCMP-256")
|
|
|
|
def run_ap_wps_conf_pin_cipher(dev, apdev, cipher):
|
|
if cipher not in dev[0].get_capability("pairwise"):
|
|
raise HwsimSkip("Cipher %s not supported" % cipher)
|
|
ssid = "test-wps-conf-pin"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK",
|
|
"rsn_pairwise": cipher})
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=15)
|
|
|
|
def test_ap_wps_and_sae(dev, apdev):
|
|
"""Initial AP configuration with first WPS Enrollee and adding SAE"""
|
|
skip_without_tkip(dev[0])
|
|
skip_without_tkip(dev[1])
|
|
try:
|
|
run_ap_wps_and_sae(dev, apdev)
|
|
finally:
|
|
dev[0].set("wps_cred_add_sae", "0")
|
|
|
|
def run_ap_wps_and_sae(dev, apdev):
|
|
check_sae_capab(dev[0])
|
|
ssid = "test-wps-sae"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "1",
|
|
"wps_cred_add_sae": "1"})
|
|
logger.info("WPS provisioning step")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
|
|
dev[0].set("wps_cred_add_sae", "1")
|
|
dev[0].request("SET sae_groups ")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " " + pin)
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['key_mgmt'] != "SAE":
|
|
raise Exception("SAE not used")
|
|
if 'pmf' not in status or status['pmf'] != "1":
|
|
raise Exception("PMF not enabled")
|
|
|
|
pin = dev[1].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[1].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
|
|
dev[1].request("WPS_PIN " + apdev[0]['bssid'] + " " + pin)
|
|
dev[1].wait_connected(timeout=30)
|
|
status = dev[1].get_status()
|
|
if status['key_mgmt'] != "WPA2-PSK":
|
|
raise Exception("WPA2-PSK not used")
|
|
if 'pmf' in status:
|
|
raise Exception("PMF enabled")
|
|
|
|
def test_ap_wps_conf_and_sae(dev, apdev):
|
|
"""WPS PBC provisioning with configured AP using PSK+SAE"""
|
|
try:
|
|
run_ap_wps_conf_and_sae(dev, apdev)
|
|
finally:
|
|
dev[0].set("wps_cred_add_sae", "0")
|
|
|
|
def run_ap_wps_conf_and_sae(dev, apdev):
|
|
check_sae_capab(dev[0])
|
|
ssid = "test-wps-conf-sae"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"ieee80211w": "1", "sae_require_mfp": "1",
|
|
"wpa_key_mgmt": "WPA-PSK SAE",
|
|
"rsn_pairwise": "CCMP"})
|
|
|
|
dev[0].set("wps_cred_add_sae", "1")
|
|
dev[0].request("SET sae_groups ")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " " + pin)
|
|
dev[0].wait_connected(timeout=30)
|
|
status = dev[0].get_status()
|
|
if status['key_mgmt'] != "SAE":
|
|
raise Exception("SAE not used")
|
|
if 'pmf' not in status or status['pmf'] != "1":
|
|
raise Exception("PMF not enabled")
|
|
|
|
dev[1].connect(ssid, psk="12345678", scan_freq="2412", proto="WPA2",
|
|
key_mgmt="WPA-PSK", ieee80211w="0")
|
|
|
|
def test_ap_wps_reg_config_and_sae(dev, apdev):
|
|
"""WPS registrar configuring an AP using AP PIN and using PSK+SAE"""
|
|
try:
|
|
run_ap_wps_reg_config_and_sae(dev, apdev)
|
|
finally:
|
|
dev[0].set("wps_cred_add_sae", "0")
|
|
|
|
def run_ap_wps_reg_config_and_sae(dev, apdev):
|
|
check_sae_capab(dev[0])
|
|
ssid = "test-wps-init-ap-pin-sae"
|
|
appin = "12345670"
|
|
hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"ap_pin": appin, "wps_cred_add_sae": "1"})
|
|
logger.info("WPS configuration step")
|
|
dev[0].flush_scan_cache()
|
|
dev[0].set("wps_cred_add_sae", "1")
|
|
dev[0].request("SET sae_groups ")
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
|
|
dev[0].dump_monitor()
|
|
new_ssid = "wps-new-ssid"
|
|
new_passphrase = "1234567890"
|
|
dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK", "CCMP",
|
|
new_passphrase)
|
|
status = dev[0].get_status()
|
|
if status['key_mgmt'] != "SAE":
|
|
raise Exception("SAE not used")
|
|
if 'pmf' not in status or status['pmf'] != "1":
|
|
raise Exception("PMF not enabled")
|
|
|
|
dev[1].connect(new_ssid, psk=new_passphrase, scan_freq="2412", proto="WPA2",
|
|
key_mgmt="WPA-PSK", ieee80211w="0")
|
|
|
|
def test_ap_wps_appl_ext(dev, apdev):
|
|
"""WPS Application Extension attribute"""
|
|
ssid = "test-wps-conf"
|
|
params = {"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wps_application_ext": 16*"11" + 5*"ee",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
pin = dev[0].wps_read_pin()
|
|
hapd.request("WPS_PIN any " + pin)
|
|
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
|
|
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
|
|
dev[0].wait_connected(timeout=30)
|
|
|
|
def test_ap_wps_pbc_ap_timeout(dev, apdev, params):
|
|
"""WPS PBC timeout on AP [long]"""
|
|
if not params['long']:
|
|
raise HwsimSkip("Skip test case with long duration due to --long not specified")
|
|
run_ap_wps_ap_timeout(dev, apdev, "WPS_PBC")
|
|
|
|
def test_ap_wps_pin_ap_timeout(dev, apdev, params):
|
|
"""WPS PIN timeout on AP [long]"""
|
|
if not params['long']:
|
|
raise HwsimSkip("Skip test case with long duration due to --long not specified")
|
|
run_ap_wps_ap_timeout(dev, apdev, "WPS_PIN any 12345670 10")
|
|
|
|
def run_ap_wps_ap_timeout(dev, apdev, cmd):
|
|
ssid = "test-wps-conf"
|
|
hapd = hostapd.add_ap(apdev[0],
|
|
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
|
|
"wpa_passphrase": "12345678", "wpa": "2",
|
|
"wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
|
|
bssid = hapd.own_addr()
|
|
hapd.request(cmd)
|
|
time.sleep(1)
|
|
dev[0].scan_for_bss(bssid, freq="2412")
|
|
bss = dev[0].get_bss(bssid)
|
|
logger.info("BSS during active Registrar: " + str(bss))
|
|
if not bss['ie'].endswith("0106ffffffffffff"):
|
|
raise Exception("Authorized MAC not included")
|
|
ev = hapd.wait_event(["WPS-TIMEOUT"], timeout=130)
|
|
if ev is None and "PBC" in cmd:
|
|
raise Exception("WPS-TIMEOUT not reported")
|
|
time.sleep(5)
|
|
dev[0].flush_scan_cache()
|
|
dev[0].scan_for_bss(bssid, freq="2412", force_scan=True)
|
|
bss = dev[0].get_bss(bssid)
|
|
logger.info("BSS after timeout: " + str(bss))
|
|
if bss['ie'].endswith("0106ffffffffffff"):
|
|
raise Exception("Authorized MAC not removed")
|