938c6e7b3d
When going through 4-way handshake, the station side reports CTRL-EVENT-CONNECTED after having sent out EAPOL-Key msg 4/4. The AP side reports AP-STA-CONNECT after having completed processing of this frame. Especially when using UML with time travel, it is possible for the connectivity test to be started before the AP side has configured the pairwise TK if the test is triggered based on CTRL-EVENT-CONNECTED instead of AP-STA-CONNECT. Add explicit wait for AP-STA-CONNECT in some of these cases to reduce likelihood of reporting failures for test cases that are actually behaving as expected. This shows up with "dev1->dev2 unicast data delivery failed" in the test log. Do the same before requesting reauthentication from the station side since that has a similar issue with the EAPOL-Start frame getting encrypted before the AP is ready for it. Signed-off-by: Jouni Malinen <j@w1.fi>
281 lines
11 KiB
Python
281 lines
11 KiB
Python
# Dynamic wpa_supplicant interface
|
|
# Copyright (c) 2013, Jouni Malinen <j@w1.fi>
|
|
#
|
|
# This software may be distributed under the terms of the BSD license.
|
|
# See README for more details.
|
|
|
|
import logging
|
|
logger = logging.getLogger()
|
|
import subprocess
|
|
import time
|
|
|
|
import hwsim_utils
|
|
import hostapd
|
|
from wpasupplicant import WpaSupplicant
|
|
|
|
def test_sta_dynamic(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hostapd.add_ap(apdev[0], params)
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
|
|
wpas.connect("sta-dynamic", psk="12345678", scan_freq="2412")
|
|
|
|
def test_sta_ap_scan_0(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface with AP_SCAN 0 connection"""
|
|
hostapd.add_ap(apdev[0], {"ssid": "test"})
|
|
bssid = apdev[0]['bssid']
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
|
|
if "OK" not in wpas.request("AP_SCAN 0"):
|
|
raise Exception("Failed to set AP_SCAN 2")
|
|
|
|
id = wpas.connect("", key_mgmt="NONE", bssid=bssid,
|
|
only_add_network=True)
|
|
wpas.request("ENABLE_NETWORK " + str(id) + " no-connect")
|
|
wpas.request("SCAN")
|
|
time.sleep(0.5)
|
|
subprocess.call(['iw', wpas.ifname, 'connect', 'test', '2412'])
|
|
wpas.wait_connected(timeout=10)
|
|
wpas.request("SCAN")
|
|
wpas.wait_connected(timeout=5)
|
|
|
|
def test_sta_ap_scan_2(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface with AP_SCAN 2 connection"""
|
|
hostapd.add_ap(apdev[0], {"ssid": "test"})
|
|
bssid = apdev[0]['bssid']
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
|
|
if "FAIL" not in wpas.request("AP_SCAN -1"):
|
|
raise Exception("Invalid AP_SCAN -1 accepted")
|
|
if "FAIL" not in wpas.request("AP_SCAN 3"):
|
|
raise Exception("Invalid AP_SCAN 3 accepted")
|
|
if "OK" not in wpas.request("AP_SCAN 2"):
|
|
raise Exception("Failed to set AP_SCAN 2")
|
|
|
|
id = wpas.connect("", key_mgmt="NONE", bssid=bssid,
|
|
only_add_network=True)
|
|
wpas.request("ENABLE_NETWORK " + str(id) + " no-connect")
|
|
subprocess.call(['iw', wpas.ifname, 'scan', 'trigger', 'freq', '2412'])
|
|
time.sleep(1)
|
|
subprocess.call(['iw', wpas.ifname, 'connect', 'test', '2412'])
|
|
wpas.wait_connected(timeout=10)
|
|
|
|
wpas.request("SET disallow_aps bssid " + bssid)
|
|
wpas.wait_disconnected(timeout=10)
|
|
|
|
subprocess.call(['iw', wpas.ifname, 'connect', 'test', '2412'])
|
|
ev = wpas.wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
|
|
if ev is not None:
|
|
raise Exception("Unexpected connection reported")
|
|
|
|
def test_sta_ap_scan_2b(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface with AP_SCAN 2 operation"""
|
|
hapd = hostapd.add_ap(apdev[0], {"ssid": "test"})
|
|
bssid = apdev[0]['bssid']
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
|
|
|
|
if "OK" not in wpas.request("AP_SCAN 2"):
|
|
raise Exception("Failed to set AP_SCAN 2")
|
|
|
|
id = wpas.connect("test", key_mgmt="NONE", bssid=bssid)
|
|
wpas.request("DISCONNECT")
|
|
wpas.set_network(id, "disabled", "1")
|
|
id2 = wpas.add_network()
|
|
wpas.set_network_quoted(id2, "ssid", "test2")
|
|
wpas.set_network(id2, "key_mgmt", "NONE")
|
|
wpas.set_network(id2, "disabled", "0")
|
|
wpas.request("REASSOCIATE")
|
|
ev = wpas.wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Association rejection not reported")
|
|
hapd.disable()
|
|
wpas.set_network(id, "disabled", "0")
|
|
wpas.set_network(id2, "disabled", "1")
|
|
for i in range(3):
|
|
ev = wpas.wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=15)
|
|
if ev is None:
|
|
raise Exception("Association rejection not reported")
|
|
wpas.request("DISCONNECT")
|
|
|
|
def test_sta_dynamic_down_up(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface down/up"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
wpas.connect("sta-dynamic", psk="12345678", scan_freq="2412")
|
|
hapd.wait_sta()
|
|
hwsim_utils.test_connectivity(wpas, hapd)
|
|
subprocess.call(['ifconfig', wpas.ifname, 'down'])
|
|
wpas.wait_disconnected(timeout=10)
|
|
if wpas.get_status_field("wpa_state") != "INTERFACE_DISABLED":
|
|
raise Exception("Unexpected wpa_state")
|
|
subprocess.call(['ifconfig', wpas.ifname, 'up'])
|
|
wpas.wait_connected(timeout=15, error="Reconnection not reported")
|
|
hapd.wait_sta()
|
|
hwsim_utils.test_connectivity(wpas, hapd)
|
|
|
|
def test_sta_dynamic_ext_mac_addr_change(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface with external MAC address change"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
logger.info("Create a dynamic wpa_supplicant interface and connect")
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
wpas.connect("sta-dynamic", psk="12345678", scan_freq="2412")
|
|
hapd.wait_sta()
|
|
hwsim_utils.test_connectivity(wpas, hapd)
|
|
subprocess.call(['ifconfig', wpas.ifname, 'down'])
|
|
wpas.wait_disconnected(timeout=10)
|
|
if wpas.get_status_field("wpa_state") != "INTERFACE_DISABLED":
|
|
raise Exception("Unexpected wpa_state")
|
|
prev_addr = wpas.p2p_interface_addr()
|
|
new_addr = '02:11:22:33:44:55'
|
|
try:
|
|
subprocess.call(['ip', 'link', 'set', 'dev', wpas.ifname,
|
|
'address', new_addr])
|
|
subprocess.call(['ifconfig', wpas.ifname, 'up'])
|
|
wpas.wait_connected(timeout=15, error="Reconnection not reported")
|
|
if wpas.get_driver_status_field('addr') != new_addr:
|
|
raise Exception("Address change not reported")
|
|
hapd.wait_sta()
|
|
hwsim_utils.test_connectivity(wpas, hapd)
|
|
sta = hapd.get_sta(new_addr)
|
|
if sta['addr'] != new_addr:
|
|
raise Exception("STA association with new address not found")
|
|
finally:
|
|
subprocess.call(['ifconfig', wpas.ifname, 'down'])
|
|
subprocess.call(['ip', 'link', 'set', 'dev', wpas.ifname,
|
|
'address', prev_addr])
|
|
subprocess.call(['ifconfig', wpas.ifname, 'up'])
|
|
|
|
def test_sta_dynamic_random_mac_addr(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface and random MAC address"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
addr0 = wpas.get_driver_status_field("addr")
|
|
wpas.request("SET preassoc_mac_addr 1")
|
|
wpas.request("SET rand_addr_lifetime 0")
|
|
|
|
id = wpas.connect("sta-dynamic", psk="12345678", mac_addr="1",
|
|
scan_freq="2412")
|
|
addr1 = wpas.get_driver_status_field("addr")
|
|
|
|
if addr0 == addr1:
|
|
raise Exception("Random MAC address not used")
|
|
|
|
sta = hapd.get_sta(addr0)
|
|
if sta['addr'] != "FAIL":
|
|
raise Exception("Unexpected STA association with permanent address")
|
|
sta = hapd.get_sta(addr1)
|
|
if sta['addr'] != addr1:
|
|
raise Exception("STA association with random address not found")
|
|
|
|
wpas.request("DISCONNECT")
|
|
wpas.connect_network(id)
|
|
addr2 = wpas.get_driver_status_field("addr")
|
|
if addr1 != addr2:
|
|
raise Exception("Random MAC address changed unexpectedly")
|
|
|
|
wpas.remove_network(id)
|
|
id = wpas.connect("sta-dynamic", psk="12345678", mac_addr="1",
|
|
scan_freq="2412")
|
|
addr2 = wpas.get_driver_status_field("addr")
|
|
if addr1 == addr2:
|
|
raise Exception("Random MAC address did not change")
|
|
|
|
def test_sta_dynamic_random_mac_addr_keep_oui(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface and random MAC address (keep OUI)"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
addr0 = wpas.get_driver_status_field("addr")
|
|
wpas.request("SET preassoc_mac_addr 2")
|
|
wpas.request("SET rand_addr_lifetime 0")
|
|
|
|
id = wpas.connect("sta-dynamic", psk="12345678", mac_addr="2",
|
|
scan_freq="2412")
|
|
addr1 = wpas.get_driver_status_field("addr")
|
|
|
|
if addr0 == addr1:
|
|
raise Exception("Random MAC address not used")
|
|
if addr1[3:8] != addr0[3:8]:
|
|
raise Exception("OUI was not kept")
|
|
|
|
sta = hapd.get_sta(addr0)
|
|
if sta['addr'] != "FAIL":
|
|
raise Exception("Unexpected STA association with permanent address")
|
|
sta = hapd.get_sta(addr1)
|
|
if sta['addr'] != addr1:
|
|
raise Exception("STA association with random address not found")
|
|
|
|
wpas.request("DISCONNECT")
|
|
wpas.connect_network(id)
|
|
addr2 = wpas.get_driver_status_field("addr")
|
|
if addr1 != addr2:
|
|
raise Exception("Random MAC address changed unexpectedly")
|
|
|
|
wpas.remove_network(id)
|
|
id = wpas.connect("sta-dynamic", psk="12345678", mac_addr="2",
|
|
scan_freq="2412")
|
|
addr2 = wpas.get_driver_status_field("addr")
|
|
if addr1 == addr2:
|
|
raise Exception("Random MAC address did not change")
|
|
if addr2[3:8] != addr0[3:8]:
|
|
raise Exception("OUI was not kept")
|
|
|
|
def test_sta_dynamic_random_mac_addr_scan(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface and random MAC address for scan"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
addr0 = wpas.get_driver_status_field("addr")
|
|
wpas.request("SET preassoc_mac_addr 1")
|
|
wpas.request("SET rand_addr_lifetime 0")
|
|
|
|
id = wpas.connect("sta-dynamic", psk="12345678", scan_freq="2412")
|
|
addr1 = wpas.get_driver_status_field("addr")
|
|
|
|
if addr0 != addr1:
|
|
raise Exception("Random MAC address used unexpectedly")
|
|
|
|
def test_sta_dynamic_random_mac_addr_scan_keep_oui(dev, apdev):
|
|
"""Dynamically added wpa_supplicant interface and random MAC address for scan (keep OUI)"""
|
|
params = hostapd.wpa2_params(ssid="sta-dynamic", passphrase="12345678")
|
|
hapd = hostapd.add_ap(apdev[0], params)
|
|
|
|
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
|
|
wpas.interface_add("wlan5")
|
|
addr0 = wpas.get_driver_status_field("addr")
|
|
wpas.request("SET preassoc_mac_addr 2")
|
|
wpas.request("SET rand_addr_lifetime 0")
|
|
|
|
id = wpas.connect("sta-dynamic", psk="12345678", scan_freq="2412")
|
|
addr1 = wpas.get_driver_status_field("addr")
|
|
|
|
if addr0 != addr1:
|
|
raise Exception("Random MAC address used unexpectedly")
|