jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/tests/hwsim/test_scan.py
Jouni Malinen ac069a31de tests: Make scan_bss_expiration_count more robust with UML 
Test case sequence "persistent_group_channel scan_bss_expiration_count"
was failing with UML when using time travel. This seemed to be because
there was no explicit wait to confirm that the AP has been fully
disabled before running the next scan. Work around this by verifying
that hostapd has terminated the BSS and waiting a bit after that before
proceeding.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-01 15:44:22 +03:00

1889 lines
74 KiB
Python
Raw Blame History

# Scanning tests
# Copyright (c) 2013-2016, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
from remotehost import remote_compatible
import binascii
import time
import logging
logger = logging.getLogger()
import os
import struct
import subprocess
import hostapd
from wpasupplicant import WpaSupplicant
from utils import HwsimSkip, fail_test, alloc_fail, wait_fail_trigger, parse_ie
from utils import clear_regdom_dev
from tshark import run_tshark
from test_ap_csa import switch_channel, wait_channel_switch, csa_supported
def check_scan(dev, params, other_started=False, test_busy=False):
if not other_started:
dev.dump_monitor()
id = dev.request("SCAN " + params)
if "FAIL" in id:
raise Exception("Failed to start scan")
id = int(id)
if test_busy:
if "FAIL-BUSY" not in dev.request("SCAN"):
raise Exception("SCAN command while already scanning not rejected")
if other_started:
ev = dev.wait_event(["CTRL-EVENT-SCAN-STARTED"])
if ev is None:
raise Exception("Other scan did not start")
if "id=" + str(id) in ev:
raise Exception("Own scan id unexpectedly included in start event")
ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Other scan did not complete")
if "id=" + str(id) in ev:
raise Exception("Own scan id unexpectedly included in completed event")
ev = dev.wait_event(["CTRL-EVENT-SCAN-STARTED"])
if ev is None:
raise Exception("Scan did not start")
if "id=" + str(id) not in ev:
raise Exception("Scan id not included in start event")
if test_busy:
if "FAIL-BUSY" not in dev.request("SCAN"):
raise Exception("SCAN command while already scanning not rejected")
ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
if "id=" + str(id) not in ev:
raise Exception("Scan id not included in completed event")
def check_scan_retry(dev, params, bssid):
for i in range(0, 5):
check_scan(dev, "freq=2412-2462,5180 use_id=1")
if int(dev.get_bss(bssid)['age']) <= 1:
return
raise Exception("Unexpectedly old BSS entry")
@remote_compatible
def test_scan(dev, apdev):
"""Control interface behavior on scan parameters"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
logger.info("Full scan")
check_scan(dev[0], "use_id=1", test_busy=True)
logger.info("Limited channel scan")
check_scan_retry(dev[0], "freq=2412-2462,5180 use_id=1", bssid)
# wait long enough to allow next scans to be verified not to find the AP
time.sleep(2)
logger.info("Passive single-channel scan")
check_scan(dev[0], "freq=2457 passive=1 use_id=1")
logger.info("Active single-channel scan")
check_scan(dev[0], "freq=2452 passive=0 use_id=1")
if int(dev[0].get_bss(bssid)['age']) < 2:
raise Exception("Unexpectedly updated BSS entry")
logger.info("Active single-channel scan on AP's operating channel")
check_scan_retry(dev[0], "freq=2412 passive=0 use_id=1", bssid)
@remote_compatible
def test_scan_tsf(dev, apdev):
"""Scan and TSF updates from Beacon/Probe Response frames"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan",
'beacon_int': "100"})
bssid = apdev[0]['bssid']
tsf = []
for passive in [1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1]:
check_scan(dev[0], "freq=2412 passive=%d use_id=1" % passive)
bss = dev[0].get_bss(bssid)
if bss:
tsf.append(int(bss['tsf']))
logger.info("TSF: " + bss['tsf'])
if tsf[-3] <= tsf[-4]:
# For now, only write this in the log without failing the test case
# since mac80211_hwsim does not yet update the Timestamp field in
# Probe Response frames.
logger.info("Probe Response did not update TSF")
#raise Exception("Probe Response did not update TSF")
if tsf[-1] <= tsf[-3]:
raise Exception("Beacon did not update TSF")
if 0 in tsf:
raise Exception("0 TSF reported")
@remote_compatible
def test_scan_only(dev, apdev):
"""Control interface behavior on scan parameters with type=only"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
logger.info("Full scan")
check_scan(dev[0], "type=only use_id=1")
logger.info("Limited channel scan")
check_scan_retry(dev[0], "type=only freq=2412-2462,5180 use_id=1", bssid)
# wait long enough to allow next scans to be verified not to find the AP
time.sleep(2)
logger.info("Passive single-channel scan")
check_scan(dev[0], "type=only freq=2457 passive=1 use_id=1")
logger.info("Active single-channel scan")
check_scan(dev[0], "type=only freq=2452 passive=0 use_id=1")
if int(dev[0].get_bss(bssid)['age']) < 2:
raise Exception("Unexpectedly updated BSS entry")
logger.info("Active single-channel scan on AP's operating channel")
check_scan_retry(dev[0], "type=only freq=2412 passive=0 use_id=1", bssid)
@remote_compatible
def test_scan_external_trigger(dev, apdev):
"""Avoid operations during externally triggered scan"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger'])
check_scan(dev[0], "use_id=1", other_started=True)
def test_scan_bss_expiration_count(dev, apdev):
"""BSS entry expiration based on scan results without match"""
if "FAIL" not in dev[0].request("BSS_EXPIRE_COUNT 0"):
raise Exception("Invalid BSS_EXPIRE_COUNT accepted")
if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 2"):
raise Exception("BSS_EXPIRE_COUNT failed")
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
dev[0].scan(freq="2412", only_new=True)
if bssid not in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS not found in initial scan")
hapd.request("DISABLE")
# Try to give enough time for hostapd to have stopped mac80211 from
# beaconing before checking a new scan. This is needed with UML time travel
# testing.
hapd.ping()
time.sleep(0.2)
dev[0].scan(freq="2412", only_new=True)
if bssid not in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS not found in first scan without match")
dev[0].scan(freq="2412", only_new=True)
if bssid in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS found after two scans without match")
@remote_compatible
def test_scan_bss_expiration_age(dev, apdev):
"""BSS entry expiration based on age"""
try:
if "FAIL" not in dev[0].request("BSS_EXPIRE_AGE COUNT 9"):
raise Exception("Invalid BSS_EXPIRE_AGE accepted")
if "OK" not in dev[0].request("BSS_EXPIRE_AGE 10"):
raise Exception("BSS_EXPIRE_AGE failed")
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
# Allow couple more retries to avoid reporting errors during heavy load
for i in range(5):
dev[0].scan(freq="2412")
if bssid in dev[0].request("SCAN_RESULTS"):
break
if bssid not in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS not found in initial scan")
hapd.request("DISABLE")
logger.info("Waiting for BSS entry to expire")
time.sleep(7)
if bssid not in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS expired too quickly")
ev = dev[0].wait_event(["CTRL-EVENT-BSS-REMOVED"], timeout=15)
if ev is None:
raise Exception("BSS entry expiration timed out")
if bssid in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS not removed after expiration time")
finally:
dev[0].request("BSS_EXPIRE_AGE 180")
@remote_compatible
def test_scan_filter(dev, apdev):
"""Filter scan results based on SSID"""
try:
if "OK" not in dev[0].request("SET filter_ssids 1"):
raise Exception("SET failed")
id = dev[0].connect("test-scan", key_mgmt="NONE", only_add_network=True)
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
hostapd.add_ap(apdev[1], {"ssid": "test-scan2"})
bssid2 = apdev[1]['bssid']
dev[0].scan(freq="2412", only_new=True)
if bssid not in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS not found in scan results")
if bssid2 in dev[0].request("SCAN_RESULTS"):
raise Exception("Unexpected BSS found in scan results")
dev[0].set_network_quoted(id, "ssid", "")
dev[0].scan(freq="2412")
id2 = dev[0].connect("test", key_mgmt="NONE", only_add_network=True)
dev[0].scan(freq="2412")
finally:
dev[0].request("SET filter_ssids 0")
@remote_compatible
def test_scan_int(dev, apdev):
"""scan interval configuration"""
try:
if "FAIL" not in dev[0].request("SCAN_INTERVAL -1"):
raise Exception("Accepted invalid scan interval")
if "OK" not in dev[0].request("SCAN_INTERVAL 1"):
raise Exception("Failed to set scan interval")
dev[0].connect("not-used", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
times = {}
for i in range(0, 3):
logger.info("Waiting for scan to start")
start = os.times()[4]
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5)
if ev is None:
raise Exception("did not start a scan")
stop = os.times()[4]
times[i] = stop - start
logger.info("Waiting for scan to complete")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 10)
if ev is None:
raise Exception("did not complete a scan")
logger.info("times=" + str(times))
if times[0] > 1 or times[1] < 0.5 or times[1] > 1.5 or times[2] < 0.5 or times[2] > 1.5:
raise Exception("Unexpected scan timing: " + str(times))
finally:
dev[0].request("SCAN_INTERVAL 5")
def test_scan_bss_operations(dev, apdev):
"""Control interface behavior on BSS parameters"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
hostapd.add_ap(apdev[1], {"ssid": "test2-scan"})
bssid2 = apdev[1]['bssid']
dev[0].scan(freq="2412")
dev[0].scan(freq="2412")
dev[0].scan(freq="2412")
id1 = dev[0].request("BSS FIRST MASK=0x1").splitlines()[0].split('=')[1]
id2 = dev[0].request("BSS LAST MASK=0x1").splitlines()[0].split('=')[1]
res = dev[0].request("BSS RANGE=ALL MASK=0x20001")
if "id=" + id1 not in res:
raise Exception("Missing BSS " + id1)
if "id=" + id2 not in res:
raise Exception("Missing BSS " + id2)
if "====" not in res:
raise Exception("Missing delim")
if "####" not in res:
raise Exception("Missing end")
res = dev[0].request("BSS RANGE=ALL MASK=0")
if "id=" + id1 not in res:
raise Exception("Missing BSS " + id1)
if "id=" + id2 not in res:
raise Exception("Missing BSS " + id2)
if "====" in res:
raise Exception("Unexpected delim")
if "####" in res:
raise Exception("Unexpected end delim")
res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines()
if len(res) != 2:
raise Exception("Unexpected result: " + str(res))
res = dev[0].request("BSS FIRST MASK=0x1")
if "id=" + id1 not in res:
raise Exception("Unexpected result: " + res)
res = dev[0].request("BSS LAST MASK=0x1")
if "id=" + id2 not in res:
raise Exception("Unexpected result: " + res)
res = dev[0].request("BSS ID-" + id1 + " MASK=0x1")
if "id=" + id1 not in res:
raise Exception("Unexpected result: " + res)
res = dev[0].request("BSS NEXT-" + id1 + " MASK=0x1")
if "id=" + id2 not in res:
raise Exception("Unexpected result: " + res)
res = dev[0].request("BSS NEXT-" + id2 + " MASK=0x1")
if "id=" in res:
raise Exception("Unexpected result: " + res)
if len(dev[0].request("BSS RANGE=" + id2 + " MASK=0x1").splitlines()) != 0:
raise Exception("Unexpected RANGE=1 result")
if len(dev[0].request("BSS RANGE=" + id1 + "- MASK=0x1").splitlines()) != 2:
raise Exception("Unexpected RANGE=0- result")
if len(dev[0].request("BSS RANGE=-" + id2 + " MASK=0x1").splitlines()) != 2:
raise Exception("Unexpected RANGE=-1 result")
if len(dev[0].request("BSS RANGE=" + id1 + "-" + id2 + " MASK=0x1").splitlines()) != 2:
raise Exception("Unexpected RANGE=0-1 result")
if len(dev[0].request("BSS RANGE=" + id2 + "-" + id2 + " MASK=0x1").splitlines()) != 1:
raise Exception("Unexpected RANGE=1-1 result")
if len(dev[0].request("BSS RANGE=" + str(int(id2) + 1) + "-" + str(int(id2) + 10) + " MASK=0x1").splitlines()) != 0:
raise Exception("Unexpected RANGE=2-10 result")
if len(dev[0].request("BSS RANGE=0-" + str(int(id2) + 10) + " MASK=0x1").splitlines()) != 2:
raise Exception("Unexpected RANGE=0-10 result")
if len(dev[0].request("BSS RANGE=" + id1 + "-" + id1 + " MASK=0x1").splitlines()) != 1:
raise Exception("Unexpected RANGE=0-0 result")
res = dev[0].request("BSS p2p_dev_addr=FOO")
if "FAIL" in res or "id=" in res:
raise Exception("Unexpected result: " + res)
res = dev[0].request("BSS p2p_dev_addr=00:11:22:33:44:55")
if "FAIL" in res or "id=" in res:
raise Exception("Unexpected result: " + res)
dev[0].request("BSS_FLUSH 1000")
res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines()
if len(res) != 2:
raise Exception("Unexpected result after BSS_FLUSH 1000")
dev[0].request("BSS_FLUSH 0")
res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines()
if len(res) != 0:
raise Exception("Unexpected result after BSS_FLUSH 0")
@remote_compatible
def test_scan_and_interface_disabled(dev, apdev):
"""Scan operation when interface gets disabled"""
try:
dev[0].request("SCAN")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"])
if ev is None:
raise Exception("Scan did not start")
dev[0].request("DRIVER_EVENT INTERFACE_DISABLED")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=7)
if ev is not None:
raise Exception("Scan completed unexpectedly")
# verify that scan is rejected
if "FAIL" not in dev[0].request("SCAN"):
raise Exception("New scan request was accepted unexpectedly")
dev[0].request("DRIVER_EVENT INTERFACE_ENABLED")
dev[0].scan(freq="2412")
finally:
dev[0].request("DRIVER_EVENT INTERFACE_ENABLED")
@remote_compatible
def test_scan_for_auth(dev, apdev):
"""cfg80211 workaround with scan-for-auth"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
# Block sme-connect radio work with an external radio work item, so that
# SELECT_NETWORK can decide to use fast associate without a new scan while
# cfg80211 still has the matching BSS entry, but the actual connection is
# not yet started.
id = dev[0].request("RADIO_WORK add block-work")
ev = dev[0].wait_event(["EXT-RADIO-WORK-START"])
if ev is None:
raise Exception("Timeout while waiting radio work to start")
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
dev[0].dump_monitor()
# Clear cfg80211 BSS table.
res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger',
'freq', '2457', 'flush'])
if res != 0:
raise HwsimSkip("iw scan trigger flush not supported")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
if ev is None:
raise Exception("External flush scan timed out")
# Release blocking radio work to allow connection to go through with the
# cfg80211 BSS entry missing.
dev[0].request("RADIO_WORK done " + id)
dev[0].wait_connected(timeout=15)
@remote_compatible
def test_scan_for_auth_fail(dev, apdev):
"""cfg80211 workaround with scan-for-auth failing"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
# Block sme-connect radio work with an external radio work item, so that
# SELECT_NETWORK can decide to use fast associate without a new scan while
# cfg80211 still has the matching BSS entry, but the actual connection is
# not yet started.
id = dev[0].request("RADIO_WORK add block-work")
ev = dev[0].wait_event(["EXT-RADIO-WORK-START"])
if ev is None:
raise Exception("Timeout while waiting radio work to start")
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
dev[0].dump_monitor()
hapd.disable()
# Clear cfg80211 BSS table.
res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger',
'freq', '2457', 'flush'])
if res != 0:
raise HwsimSkip("iw scan trigger flush not supported")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
if ev is None:
raise Exception("External flush scan timed out")
# Release blocking radio work to allow connection to go through with the
# cfg80211 BSS entry missing.
dev[0].request("RADIO_WORK done " + id)
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS",
"CTRL-EVENT-CONNECTED"], 15)
if ev is None:
raise Exception("Scan event missing")
if "CTRL-EVENT-CONNECTED" in ev:
raise Exception("Unexpected connection")
dev[0].request("DISCONNECT")
@remote_compatible
def test_scan_for_auth_wep(dev, apdev):
"""cfg80211 scan-for-auth workaround with WEP keys"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0],
{"ssid": "wep", "wep_key0": '"abcde"',
"auth_algs": "2"})
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
# Block sme-connect radio work with an external radio work item, so that
# SELECT_NETWORK can decide to use fast associate without a new scan while
# cfg80211 still has the matching BSS entry, but the actual connection is
# not yet started.
id = dev[0].request("RADIO_WORK add block-work")
ev = dev[0].wait_event(["EXT-RADIO-WORK-START"])
if ev is None:
raise Exception("Timeout while waiting radio work to start")
dev[0].connect("wep", key_mgmt="NONE", wep_key0='"abcde"',
auth_alg="SHARED", scan_freq="2412", wait_connect=False)
dev[0].dump_monitor()
# Clear cfg80211 BSS table.
res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger',
'freq', '2457', 'flush'])
if res != 0:
raise HwsimSkip("iw scan trigger flush not supported")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5)
if ev is None:
raise Exception("External flush scan timed out")
# Release blocking radio work to allow connection to go through with the
# cfg80211 BSS entry missing.
dev[0].request("RADIO_WORK done " + id)
dev[0].wait_connected(timeout=15)
@remote_compatible
def test_scan_hidden(dev, apdev):
"""Control interface behavior on scan parameters"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan",
"ignore_broadcast_ssid": "1"})
bssid = apdev[0]['bssid']
check_scan(dev[0], "freq=2412 use_id=1")
if "test-scan" in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS unexpectedly found in initial scan")
id1 = dev[0].connect("foo", key_mgmt="NONE", scan_ssid="1",
only_add_network=True)
id2 = dev[0].connect("test-scan", key_mgmt="NONE", scan_ssid="1",
only_add_network=True)
id3 = dev[0].connect("bar", key_mgmt="NONE", only_add_network=True)
check_scan(dev[0], "freq=2412 use_id=1")
if "test-scan" in dev[0].request("SCAN_RESULTS"):
raise Exception("BSS unexpectedly found in scan")
# Allow multiple attempts to be more robust under heavy CPU load that can
# result in Probe Response frames getting sent only after the station has
# already stopped waiting for the response on the channel.
found = False
for i in range(10):
check_scan(dev[0], "scan_id=%d,%d,%d freq=2412 use_id=1" % (id1, id2, id3))
if "test-scan" in dev[0].request("SCAN_RESULTS"):
found = True
break
if not found:
raise Exception("BSS not found in scan")
if "FAIL" not in dev[0].request("SCAN scan_id=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17"):
raise Exception("Too many scan_id values accepted")
# Duplicate SSID removal
check_scan(dev[0], "scan_id=%d,%d,%d freq=2412 use_id=1" % (id1, id1, id2))
dev[0].request("REMOVE_NETWORK all")
hapd.disable()
dev[0].flush_scan_cache(freq=2432)
dev[0].flush_scan_cache()
def test_scan_and_bss_entry_removed(dev, apdev):
"""Last scan result and connect work processing on BSS entry update"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "open",
"eap_server": "1",
"wps_state": "2"})
bssid = apdev[0]['bssid']
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
# Add a BSS entry
dev[0].scan_for_bss(bssid, freq="2412")
wpas.scan_for_bss(bssid, freq="2412")
# Start a connect radio work with a blocking entry preventing this from
# proceeding; this stores a pointer to the selected BSS entry.
id = dev[0].request("RADIO_WORK add block-work")
w_id = wpas.request("RADIO_WORK add block-work")
dev[0].wait_event(["EXT-RADIO-WORK-START"], timeout=1)
wpas.wait_event(["EXT-RADIO-WORK-START"], timeout=1)
nid = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
w_nid = wpas.connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
time.sleep(0.1)
# Remove the BSS entry
dev[0].request("BSS_FLUSH 0")
wpas.request("BSS_FLUSH 0")
# Allow the connect radio work to continue. The bss entry stored in the
# pending connect work is now stale. This will result in the connection
# attempt failing since the BSS entry does not exist.
dev[0].request("RADIO_WORK done " + id)
wpas.request("RADIO_WORK done " + w_id)
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected connection")
dev[0].remove_network(nid)
ev = wpas.wait_event(["CTRL-EVENT-CONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected connection")
wpas.remove_network(w_nid)
time.sleep(0.5)
dev[0].request("BSS_FLUSH 0")
wpas.request("BSS_FLUSH 0")
# Add a BSS entry
dev[0].scan_for_bss(bssid, freq="2412")
wpas.scan_for_bss(bssid, freq="2412")
# Start a connect radio work with a blocking entry preventing this from
# proceeding; this stores a pointer to the selected BSS entry.
id = dev[0].request("RADIO_WORK add block-work")
w_id = wpas.request("RADIO_WORK add block-work")
dev[0].wait_event(["EXT-RADIO-WORK-START"], timeout=1)
wpas.wait_event(["EXT-RADIO-WORK-START"], timeout=1)
# Schedule a connection based on the current BSS entry.
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
wpas.connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
# Update scan results with results that have longer set of IEs so that new
# memory needs to be allocated for the BSS entry.
hapd.request("WPS_PBC")
time.sleep(0.1)
subprocess.call(['iw', dev[0].ifname, 'scan', 'trigger', 'freq', '2412'])
subprocess.call(['iw', wpas.ifname, 'scan', 'trigger', 'freq', '2412'])
time.sleep(0.1)
# Allow the connect radio work to continue. The bss entry stored in the
# pending connect work becomes stale during the scan and it must have been
# updated for the connection to work.
dev[0].request("RADIO_WORK done " + id)
wpas.request("RADIO_WORK done " + w_id)
dev[0].wait_connected(timeout=15, error="No connection (sme-connect)")
wpas.wait_connected(timeout=15, error="No connection (connect)")
dev[0].request("DISCONNECT")
wpas.request("DISCONNECT")
dev[0].flush_scan_cache()
wpas.flush_scan_cache()
@remote_compatible
def test_scan_reqs_with_non_scan_radio_work(dev, apdev):
"""SCAN commands while non-scan radio_work is in progress"""
id = dev[0].request("RADIO_WORK add test-work-a")
ev = dev[0].wait_event(["EXT-RADIO-WORK-START"])
if ev is None:
raise Exception("Timeout while waiting radio work to start")
if "OK" not in dev[0].request("SCAN"):
raise Exception("SCAN failed")
if "FAIL-BUSY" not in dev[0].request("SCAN"):
raise Exception("SCAN accepted while one is already pending")
if "FAIL-BUSY" not in dev[0].request("SCAN"):
raise Exception("SCAN accepted while one is already pending")
res = dev[0].request("RADIO_WORK show").splitlines()
count = 0
for l in res:
if "scan" in l:
count += 1
if count != 1:
logger.info(res)
raise Exception("Unexpected number of scan radio work items")
dev[0].dump_monitor()
dev[0].request("RADIO_WORK done " + id)
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5)
if ev is None:
raise Exception("Scan did not start")
if "FAIL-BUSY" not in dev[0].request("SCAN"):
raise Exception("SCAN accepted while one is already in progress")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
if ev is None:
raise Exception("Scan did not complete")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=0.2)
if ev is not None:
raise Exception("Unexpected scan started")
def test_scan_setband(dev, apdev):
"""Band selection for scan operations"""
try:
hapd = None
hapd2 = None
params = {"ssid": "test-setband",
"hw_mode": "a",
"channel": "36",
"country_code": "US"}
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
params = {"ssid": "test-setband",
"hw_mode": "g",
"channel": "1"}
hapd2 = hostapd.add_ap(apdev[1], params)
bssid2 = apdev[1]['bssid']
if "FAIL" not in dev[0].request("SET setband FOO"):
raise Exception("Invalid set setband accepted")
if "OK" not in dev[0].request("SET setband AUTO"):
raise Exception("Failed to set setband")
if "OK" not in dev[1].request("SET setband 5G"):
raise Exception("Failed to set setband")
if "OK" not in dev[2].request("SET setband 2G"):
raise Exception("Failed to set setband")
# Allow a retry to avoid reporting errors during heavy load
for j in range(5):
for i in range(3):
dev[i].request("SCAN only_new=1")
for i in range(3):
ev = dev[i].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 15)
if ev is None:
raise Exception("Scan timed out")
res0 = dev[0].request("SCAN_RESULTS")
res1 = dev[1].request("SCAN_RESULTS")
res2 = dev[2].request("SCAN_RESULTS")
if bssid in res0 and bssid2 in res0 and bssid in res1 and bssid2 in res2:
break
res = dev[0].request("SCAN_RESULTS")
if bssid not in res or bssid2 not in res:
raise Exception("Missing scan result(0)")
res = dev[1].request("SCAN_RESULTS")
if bssid not in res:
raise Exception("Missing scan result(1)")
if bssid2 in res:
raise Exception("Unexpected scan result(1)")
res = dev[2].request("SCAN_RESULTS")
if bssid2 not in res:
raise Exception("Missing scan result(2)")
if bssid in res:
raise Exception("Unexpected scan result(2)")
finally:
if hapd:
hapd.request("DISABLE")
if hapd2:
hapd2.request("DISABLE")
subprocess.call(['iw', 'reg', 'set', '00'])
for i in range(3):
dev[i].request("SET setband AUTO")
dev[i].flush_scan_cache()
@remote_compatible
def test_scan_hidden_many(dev, apdev):
"""scan_ssid=1 with large number of profile with hidden SSID"""
try:
_test_scan_hidden_many(dev, apdev)
finally:
dev[0].flush_scan_cache(freq=2432)
dev[0].flush_scan_cache()
dev[0].request("SCAN_INTERVAL 5")
def _test_scan_hidden_many(dev, apdev):
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan-ssid",
"ignore_broadcast_ssid": "1"})
bssid = apdev[0]['bssid']
dev[0].request("SCAN_INTERVAL 1")
for i in range(5):
id = dev[0].add_network()
dev[0].set_network_quoted(id, "ssid", "foo")
dev[0].set_network(id, "key_mgmt", "NONE")
dev[0].set_network(id, "disabled", "0")
dev[0].set_network(id, "scan_freq", "2412")
dev[0].set_network(id, "scan_ssid", "1")
dev[0].set_network_quoted(id, "ssid", "test-scan-ssid")
dev[0].set_network(id, "key_mgmt", "NONE")
dev[0].set_network(id, "disabled", "0")
dev[0].set_network(id, "scan_freq", "2412")
dev[0].set_network(id, "scan_ssid", "1")
for i in range(5):
id = dev[0].add_network()
dev[0].set_network_quoted(id, "ssid", "foo")
dev[0].set_network(id, "key_mgmt", "NONE")
dev[0].set_network(id, "disabled", "0")
dev[0].set_network(id, "scan_freq", "2412")
dev[0].set_network(id, "scan_ssid", "1")
dev[0].request("REASSOCIATE")
dev[0].wait_connected(timeout=30)
dev[0].request("REMOVE_NETWORK all")
hapd.disable()
def test_scan_random_mac(dev, apdev, params):
"""Random MAC address in scans"""
try:
_test_scan_random_mac(dev, apdev, params)
finally:
dev[0].request("MAC_RAND_SCAN all enable=0")
def _test_scan_random_mac(dev, apdev, params):
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
tests = ["",
"addr=foo",
"mask=foo",
"enable=1",
"all enable=1 mask=00:11:22:33:44:55",
"all enable=1 addr=00:11:22:33:44:55",
"all enable=1 addr=01:11:22:33:44:55 mask=ff:ff:ff:ff:ff:ff",
"all enable=1 addr=00:11:22:33:44:55 mask=fe:ff:ff:ff:ff:ff",
"enable=2 scan sched pno all",
"pno enable=1",
"all enable=2",
"foo"]
for args in tests:
if "FAIL" not in dev[0].request("MAC_RAND_SCAN " + args):
raise Exception("Invalid MAC_RAND_SCAN accepted: " + args)
if dev[0].get_driver_status_field('capa.mac_addr_rand_scan_supported') != '1':
raise HwsimSkip("Driver does not support random MAC address for scanning")
tests = ["all enable=1",
"all enable=1 addr=f2:11:22:33:44:55 mask=ff:ff:ff:ff:ff:ff",
"all enable=1 addr=f2:11:33:00:00:00 mask=ff:ff:ff:00:00:00"]
for args in tests:
dev[0].request("MAC_RAND_SCAN " + args)
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
"wlan.fc.type_subtype == 4", ["wlan.ta"])
if out is not None:
addr = out.splitlines()
logger.info("Probe Request frames seen from: " + str(addr))
if dev[0].own_addr() in addr:
raise Exception("Real address used to transmit Probe Request frame")
if "f2:11:22:33:44:55" not in addr:
raise Exception("Fully configured random address not seen")
found = False
for a in addr:
if a.startswith('f2:11:33'):
found = True
break
if not found:
raise Exception("Fixed OUI random address not seen")
def test_scan_random_mac_connected(dev, apdev, params):
"""Random MAC address in scans while connected"""
try:
_test_scan_random_mac_connected(dev, apdev, params)
finally:
dev[0].request("MAC_RAND_SCAN all enable=0")
def _test_scan_random_mac_connected(dev, apdev, params):
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
if dev[0].get_driver_status_field('capa.mac_addr_rand_scan_supported') != '1':
raise HwsimSkip("Driver does not support random MAC address for scanning")
dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412")
hostapd.add_ap(apdev[1], {"ssid": "test-scan-2", "channel": "11"})
bssid1 = apdev[1]['bssid']
# Verify that scanning can be completed while connected even if that means
# disabling use of random MAC address.
dev[0].request("MAC_RAND_SCAN all enable=1")
dev[0].scan_for_bss(bssid1, freq=2462, force_scan=True)
@remote_compatible
def test_scan_trigger_failure(dev, apdev):
"""Scan trigger to the driver failing"""
if dev[0].get_status_field('wpa_state') == "SCANNING":
raise Exception("wpa_state was already SCANNING")
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
if "OK" not in dev[0].request("SET test_failure 1"):
raise Exception("Failed to set test_failure")
if "OK" not in dev[0].request("SCAN"):
raise Exception("SCAN command failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10)
if ev is None:
raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event")
if "retry=1" in ev:
raise Exception("Unexpected scan retry indicated")
if dev[0].get_status_field('wpa_state') == "SCANNING":
raise Exception("wpa_state SCANNING not cleared")
id = dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].select_network(id)
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10)
if ev is None:
raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event")
if "retry=1" not in ev:
raise Exception("No scan retry indicated for connection")
if dev[0].get_status_field('wpa_state') == "SCANNING":
raise Exception("wpa_state SCANNING not cleared")
dev[0].request("SET test_failure 0")
dev[0].wait_connected()
dev[0].request("SET test_failure 1")
if "OK" not in dev[0].request("SCAN"):
raise Exception("SCAN command failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10)
if ev is None:
raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event")
if "retry=1" in ev:
raise Exception("Unexpected scan retry indicated")
if dev[0].get_status_field('wpa_state') != "COMPLETED":
raise Exception("wpa_state COMPLETED not restored")
dev[0].request("SET test_failure 0")
@remote_compatible
def test_scan_specify_ssid(dev, apdev):
"""Control interface behavior on scan SSID parameter"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-hidden",
"ignore_broadcast_ssid": "1"})
bssid = apdev[0]['bssid']
check_scan(dev[0], "freq=2412 use_id=1 ssid 414243")
bss = dev[0].get_bss(bssid)
if bss is not None and bss['ssid'] == 'test-hidden':
raise Exception("BSS entry for hidden AP present unexpectedly")
# Allow couple more retries to avoid reporting errors during heavy load
for i in range(5):
check_scan(dev[0], "freq=2412 ssid 414243 ssid 746573742d68696464656e ssid 616263313233 use_id=1")
bss = dev[0].get_bss(bssid)
if bss and 'test-hidden' in dev[0].request("SCAN_RESULTS"):
break
if bss is None:
raise Exception("BSS entry for hidden AP not found")
if 'test-hidden' not in dev[0].request("SCAN_RESULTS"):
raise Exception("Expected SSID not included in the scan results")
hapd.disable()
dev[0].flush_scan_cache(freq=2432)
dev[0].flush_scan_cache()
if "FAIL" not in dev[0].request("SCAN ssid foo"):
raise Exception("Invalid SCAN command accepted")
@remote_compatible
def test_scan_ap_scan_2_ap_mode(dev, apdev):
"""AP_SCAN 2 AP mode and scan()"""
try:
_test_scan_ap_scan_2_ap_mode(dev, apdev)
finally:
dev[0].request("AP_SCAN 1")
def _test_scan_ap_scan_2_ap_mode(dev, apdev):
if "OK" not in dev[0].request("AP_SCAN 2"):
raise Exception("Failed to set AP_SCAN 2")
id = dev[0].add_network()
dev[0].set_network(id, "mode", "2")
dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
dev[0].set_network(id, "key_mgmt", "NONE")
dev[0].set_network(id, "frequency", "2412")
dev[0].set_network(id, "scan_freq", "2412")
dev[0].set_network(id, "disabled", "0")
dev[0].select_network(id)
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=5)
if ev is None:
raise Exception("AP failed to start")
with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"):
if "OK" not in dev[0].request("SCAN freq=2412"):
raise Exception("SCAN command failed unexpectedly")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED",
"AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("CTRL-EVENT-SCAN-FAILED not seen")
if "AP-DISABLED" in ev:
raise Exception("Unexpected AP-DISABLED event")
if "retry=1" in ev:
# Wait for the retry to scan happen
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED",
"AP-DISABLED"], timeout=5)
if ev is None:
raise Exception("CTRL-EVENT-SCAN-FAILED not seen - retry")
if "AP-DISABLED" in ev:
raise Exception("Unexpected AP-DISABLED event - retry")
dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq="2412")
dev[1].request("DISCONNECT")
dev[1].wait_disconnected()
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
def test_scan_bss_expiration_on_ssid_change(dev, apdev):
"""BSS entry expiration when AP changes SSID"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
hapd.request("DISABLE")
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 3"):
raise Exception("BSS_EXPIRE_COUNT failed")
dev[0].scan(freq="2412")
dev[0].scan(freq="2412")
if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 2"):
raise Exception("BSS_EXPIRE_COUNT failed")
res = dev[0].request("SCAN_RESULTS")
if "test-scan" not in res:
raise Exception("The first SSID not in scan results")
if "open" not in res:
raise Exception("The second SSID not in scan results")
dev[0].connect("open", key_mgmt="NONE")
dev[0].request("BSS_FLUSH 0")
res = dev[0].request("SCAN_RESULTS")
if "test-scan" in res:
raise Exception("The BSS entry with the old SSID was not removed")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
def test_scan_dfs(dev, apdev, params):
"""Scan on DFS channels"""
try:
_test_scan_dfs(dev, apdev, params)
finally:
clear_regdom_dev(dev)
def _test_scan_dfs(dev, apdev, params):
subprocess.call(['iw', 'reg', 'set', 'US'])
for i in range(2):
for j in range(5):
ev = dev[i].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=5)
if ev is None:
raise Exception("No regdom change event")
if "alpha2=US" in ev:
break
dev[i].dump_monitor()
if "OK" not in dev[0].request("SCAN"):
raise Exception("SCAN command failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
if "OK" not in dev[0].request("SCAN freq=2412,5180,5260,5500,5600,5745"):
raise Exception("SCAN command failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
"wlan.fc.type_subtype == 4", ["radiotap.channel.freq"])
if out is not None:
freq = out.splitlines()
freq = [int(f) for f in freq]
freq = list(set(freq))
freq.sort()
logger.info("Active scan seen on channels: " + str(freq))
for f in freq:
if (f >= 5260 and f <= 5320) or (f >= 5500 and f <= 5700):
raise Exception("Active scan on DFS channel: %d" % f)
if f in [2467, 2472]:
raise Exception("Active scan on US-disallowed channel: %d" % f)
@remote_compatible
def test_scan_abort(dev, apdev):
"""Aborting a full scan"""
dev[0].request("SCAN")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"])
if ev is None:
raise Exception("Scan did not start")
if "OK" not in dev[0].request("ABORT_SCAN"):
raise Exception("ABORT_SCAN command failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=2)
if ev is None:
raise Exception("Scan did not terminate")
@remote_compatible
def test_scan_abort_on_connect(dev, apdev):
"""Aborting a full scan on connection request"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
dev[0].dump_monitor()
dev[0].request("SCAN")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"])
if ev is None:
raise Exception("Scan did not start")
dev[0].connect("test-scan", key_mgmt="NONE")
@remote_compatible
def test_scan_ext(dev, apdev):
"""Custom IE in Probe Request frame"""
hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
bssid = apdev[0]['bssid']
try:
if "OK" not in dev[0].request("VENDOR_ELEM_ADD 14 dd050011223300"):
raise Exception("VENDOR_ELEM_ADD failed")
check_scan(dev[0], "freq=2412 use_id=1")
finally:
dev[0].request("VENDOR_ELEM_REMOVE 14 *")
def test_scan_fail(dev, apdev):
"""Scan failures"""
with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"):
dev[0].request("DISCONNECT")
if "OK" not in dev[0].request("SCAN freq=2412"):
raise Exception("SCAN failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5)
if ev is None:
raise Exception("Did not see scan failure event")
dev[0].dump_monitor()
for i in range(1, 5):
with alloc_fail(dev[0], i,
"wpa_scan_clone_params;wpa_supplicant_trigger_scan"):
if "OK" not in dev[0].request("SCAN ssid 112233 freq=2412"):
raise Exception("SCAN failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5)
if ev is None:
raise Exception("Did not see scan failure event")
dev[0].dump_monitor()
with alloc_fail(dev[0], 1, "radio_add_work;wpa_supplicant_trigger_scan"):
if "OK" not in dev[0].request("SCAN freq=2412"):
raise Exception("SCAN failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5)
if ev is None:
raise Exception("Did not see scan failure event")
dev[0].dump_monitor()
try:
if "OK" not in dev[0].request("SET filter_ssids 1"):
raise Exception("SET failed")
id = dev[0].connect("test-scan", key_mgmt="NONE", only_add_network=True)
with alloc_fail(dev[0], 1, "wpa_supplicant_build_filter_ssids"):
# While the filter list cannot be created due to memory allocation
# failure, this scan is expected to be completed without SSID
# filtering.
if "OK" not in dev[0].request("SCAN freq=2412"):
raise Exception("SCAN failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
dev[0].remove_network(id)
finally:
dev[0].request("SET filter_ssids 0")
dev[0].dump_monitor()
with alloc_fail(dev[0], 1, "nl80211_get_scan_results"):
if "OK" not in dev[0].request("SCAN freq=2412"):
raise Exception("SCAN failed")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5)
if ev is None:
raise Exception("Did not see scan started event")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].dump_monitor()
try:
if "OK" not in dev[0].request("SET setband 2G"):
raise Exception("SET setband failed")
with alloc_fail(dev[0], 1, "=wpa_setband_scan_freqs_list"):
# While the frequency list cannot be created due to memory
# allocation failure, this scan is expected to be completed without
# frequency filtering.
if "OK" not in dev[0].request("SCAN"):
raise Exception("SCAN failed")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("ABORT_SCAN")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
finally:
dev[0].request("SET setband AUTO")
dev[0].dump_monitor()
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5")
wpas.request("SET preassoc_mac_addr 1")
with fail_test(wpas, 1, "nl80211_set_mac_addr;wpas_trigger_scan_cb"):
if "OK" not in wpas.request("SCAN freq=2412"):
raise Exception("SCAN failed")
ev = wpas.wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5)
if ev is None:
raise Exception("Did not see scan failure event")
wpas.request("SET preassoc_mac_addr 0")
wpas.dump_monitor()
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
with alloc_fail(dev[0], 1, "wpa_bss_add"):
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
def test_scan_fail_type_only(dev, apdev):
"""Scan failures for TYPE=ONLY"""
with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"):
dev[0].request("SCAN TYPE=ONLY freq=2417")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5)
if ev is None:
raise Exception("Scan trigger failure not reported")
# Verify that scan_only_handler() does not get left set as the
# wpa_s->scan_res_handler in failure case.
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
@remote_compatible
def test_scan_freq_list(dev, apdev):
"""Scan with SET freq_list and scan_cur_freq"""
try:
if "OK" not in dev[0].request("SET freq_list 2412 2417"):
raise Exception("SET freq_list failed")
check_scan(dev[0], "use_id=1")
finally:
dev[0].request("SET freq_list ")
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412")
try:
if "OK" not in dev[0].request("SET scan_cur_freq 1"):
raise Exception("SET scan_cur_freq failed")
check_scan(dev[0], "use_id=1")
finally:
dev[0].request("SET scan_cur_freq 0")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
def test_scan_bss_limit(dev, apdev):
"""Scan and wpa_supplicant BSS entry limit"""
try:
_test_scan_bss_limit(dev, apdev)
finally:
dev[0].request("SET bss_max_count 200")
pass
def _test_scan_bss_limit(dev, apdev):
# Trigger 'Increasing the MAX BSS count to 2 because all BSSes are in use.
# We should normally not get here!' message by limiting the maximum BSS
# count to one so that the second AP would not fit in the BSS list and the
# first AP cannot be removed from the list since it is still in use.
dev[0].request("SET bss_max_count 1")
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412")
hapd2 = hostapd.add_ap(apdev[1], {"ssid": "test-scan-2",
"channel": "6"})
dev[0].scan_for_bss(apdev[1]['bssid'], freq=2437, force_scan=True)
def run_scan(dev, bssid, exp_freq):
for i in range(5):
dev.request("SCAN freq=2412,2437,2462")
ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"])
if ev is None:
raise Exception("Scan did not complete")
bss = dev.get_bss(bssid)
freq = int(bss['freq']) if bss else 0
if freq == exp_freq:
break
if freq != exp_freq:
raise Exception("BSS entry shows incorrect frequency: %d != %d" % (freq, exp_freq))
def test_scan_chan_switch(dev, apdev):
"""Scanning and AP changing channels"""
# This test verifies that wpa_supplicant updates its local BSS table based
# on the correct cfg80211 scan entry in cases where the cfg80211 BSS table
# has multiple (one for each frequency) BSS entries for the same BSS.
csa_supported(dev[0])
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan", "channel": "1"})
csa_supported(hapd)
bssid = hapd.own_addr()
logger.info("AP channel switch while not connected")
run_scan(dev[0], bssid, 2412)
dev[0].dump_monitor()
switch_channel(hapd, 1, 2437)
run_scan(dev[0], bssid, 2437)
dev[0].dump_monitor()
switch_channel(hapd, 1, 2462)
run_scan(dev[0], bssid, 2462)
dev[0].dump_monitor()
logger.info("AP channel switch while connected")
dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412 2437 2462")
run_scan(dev[0], bssid, 2462)
dev[0].dump_monitor()
switch_channel(hapd, 2, 2437)
wait_channel_switch(dev[0], 2437)
dev[0].dump_monitor()
run_scan(dev[0], bssid, 2437)
dev[0].dump_monitor()
switch_channel(hapd, 2, 2412)
wait_channel_switch(dev[0], 2412)
dev[0].dump_monitor()
run_scan(dev[0], bssid, 2412)
dev[0].dump_monitor()
def test_scan_new_only(dev, apdev):
"""Scan and only_new=1 multiple times"""
try:
_test_scan_new_only(dev, apdev)
finally:
dev[0].set("ignore_old_scan_res", "0")
def _test_scan_new_only(dev, apdev):
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
dev[0].set("ignore_old_scan_res", "1")
# Get the BSS added to cfg80211 BSS list
bssid = hapd.own_addr()
dev[0].scan_for_bss(bssid, freq=2412)
bss = dev[0].get_bss(bssid)
idx1 = bss['update_idx']
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
bss = dev[0].get_bss(bssid)
idx2 = bss['update_idx']
if int(idx2) <= int(idx1):
raise Exception("Scan result update_idx did not increase")
# Disable AP to ensure there are no new scan results after this.
hapd.disable()
# Try to scan multiple times to verify that old scan results do not get
# accepted as new.
for i in range(10):
dev[0].scan(freq=2412)
bss = dev[0].get_bss(bssid)
if bss:
idx = bss['update_idx']
if int(idx) > int(idx2):
raise Exception("Unexpected update_idx increase")
def test_scan_flush(dev, apdev):
"""Ongoing scan and FLUSH"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"})
dev[0].dump_monitor()
dev[0].request("SCAN TYPE=ONLY freq=2412-2472 passive=1")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=10)
if ev is None:
raise Exception("Scan did not start")
time.sleep(0.1)
dev[0].request("FLUSH")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS",
"CTRL-EVENT-SCAN-FAILED",
"CTRL-EVENT-BSS-ADDED"], timeout=10)
if ev is None:
raise Exception("Scan did not complete")
if "CTRL-EVENT-BSS-ADDED" in ev:
raise Exception("Unexpected BSS entry addition after FLUSH")
def test_scan_ies(dev, apdev):
"""Scan and both Beacon and Probe Response frame IEs"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan",
"beacon_int": "20"})
bssid = hapd.own_addr()
dev[0].dump_monitor()
for i in range(10):
dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15)
if ev is None:
raise Exception("Scan did not complete")
if dev[0].get_bss(bssid):
break
for i in range(10):
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
bss = dev[0].get_bss(bssid)
if 'beacon_ie' in bss:
if bss['ie'] != bss['beacon_ie']:
break
if not bss or 'beacon_ie' not in bss:
raise Exception("beacon_ie not present")
ie = parse_ie(bss['ie'])
logger.info("ie: " + str(list(ie.keys())))
beacon_ie = parse_ie(bss['beacon_ie'])
logger.info("beacon_ie: " + str(list(ie.keys())))
if bss['ie'] == bss['beacon_ie']:
raise Exception("Both ie and beacon_ie show same data")
def test_scan_parsing(dev, apdev):
"""Scan result parsing"""
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES START"):
raise Exception("DRIVER_EVENT SCAN_RES START failed")
if "FAIL" not in dev[0].request("DRIVER_EVENT SCAN_RES foo "):
raise Exception("Invalid DRIVER_EVENT SCAN_RES accepted")
tests = ["",
"flags=ffffffff",
"bssid=02:03:04:05:06:07",
"freq=1234",
"beacon_int=102",
"caps=1234",
"qual=10",
"noise=10",
"level=10",
"tsf=1122334455667788",
"age=123",
"est_throughput=100",
"snr=10",
"parent_tsf=1122334455667788",
"tsf_bssid=02:03:04:05:06:07",
"ie=00",
"beacon_ie=00",
# Too long SSID
"bssid=02:ff:00:00:00:01 ie=0033" + 33*'FF',
# All parameters
"flags=ffffffff bssid=02:ff:00:00:00:02 freq=1234 beacon_int=102 caps=1234 qual=10 noise=10 level=10 tsf=1122334455667788 age=123456 est_throughput=100 snr=10 parent_tsf=1122334455667788 tsf_bssid=02:03:04:05:06:07 ie=000474657374 beacon_ie=000474657374",
# Beacon IEs truncated
"bssid=02:ff:00:00:00:03 ie=0000 beacon_ie=0003ffff",
# Probe Response IEs truncated
"bssid=02:ff:00:00:00:04 ie=00000101 beacon_ie=0000",
# DMG (invalid caps)
"bssid=02:ff:00:00:00:05 freq=58320 ie=0003646d67",
# DMG (IBSS)
"bssid=02:ff:00:00:00:06 freq=60480 caps=0001 ie=0003646d67",
# DMG (PBSS)
"bssid=02:ff:00:00:00:07 freq=62640 caps=0002 ie=0003646d67",
# DMG (AP)
"bssid=02:ff:00:00:00:08 freq=64800 caps=0003 ie=0003646d67",
# Test BSS for updates
"bssid=02:ff:00:00:00:09 freq=2412 caps=0011 level=1 ie=0003757064010182",
# Minimal BSS data
"bssid=02:ff:00:00:00:00 ie=0000"]
for t in tests:
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES BSS " + t):
raise Exception("DRIVER_EVENT SCAN_RES BSS failed")
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES END"):
raise Exception("DRIVER_EVENT SCAN_RES END failed")
res = dev[0].request("SCAN_RESULTS")
logger.info("SCAN_RESULTS:\n" + res)
bss = []
res = dev[0].request("BSS FIRST")
if "FAIL" in res:
raise Exception("BSS FIRST failed")
while "\nbssid=" in res:
logger.info("BSS output:\n" + res)
bssid = None
id = None
for val in res.splitlines():
if val.startswith("id="):
id = val.split('=')[1]
if val.startswith("bssid="):
bssid = val.split('=')[1]
if bssid is None or id is None:
raise Exception("Missing id or bssid line")
bss.append(bssid)
res = dev[0].request("BSS NEXT-" + id)
logger.info("Discovered BSSs: " + str(bss))
invalid_bss = ["02:03:04:05:06:07", "02:ff:00:00:00:01"]
valid_bss = ["02:ff:00:00:00:00", "02:ff:00:00:00:02",
"02:ff:00:00:00:03", "02:ff:00:00:00:04",
"02:ff:00:00:00:05", "02:ff:00:00:00:06",
"02:ff:00:00:00:07", "02:ff:00:00:00:08",
"02:ff:00:00:00:09"]
for bssid in invalid_bss:
if bssid in bss:
raise Exception("Invalid BSS included: " + bssid)
for bssid in valid_bss:
if bssid not in bss:
raise Exception("Valid BSS missing: " + bssid)
logger.info("Update BSS parameters")
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES START"):
raise Exception("DRIVER_EVENT SCAN_RES START failed")
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES BSS bssid=02:ff:00:00:00:09 freq=2412 caps=0002 level=2 ie=000375706401028204"):
raise Exception("DRIVER_EVENT SCAN_RES BSS failed")
if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES END"):
raise Exception("DRIVER_EVENT SCAN_RES END failed")
res = dev[0].request("BSS 02:ff:00:00:00:09")
logger.info("Updated BSS:\n" + res)
def test_scan_specific_bssid(dev, apdev):
"""Scan for a specific BSSID"""
dev[0].flush_scan_cache()
hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan",
"beacon_int": "1000"})
bssid = hapd.own_addr()
time.sleep(0.1)
dev[0].request("SCAN TYPE=ONLY freq=2412 bssid=02:ff:ff:ff:ff:ff")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
if ev is None:
raise Exception("Scan did not complete")
bss1 = dev[0].get_bss(bssid)
for i in range(10):
dev[0].request("SCAN TYPE=ONLY freq=2412 bssid=" + bssid)
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
if ev is None:
raise Exception("Scan did not complete")
bss2 = dev[0].get_bss(bssid)
if bss2:
break
if not bss2:
raise Exception("Did not find BSS")
if bss1 and 'beacon_ie' in bss1 and 'ie' in bss1 and bss1['beacon_ie'] != bss1['ie']:
raise Exception("First scan for unknown BSSID returned unexpected response")
if bss2 and 'beacon_ie' in bss2 and 'ie' in bss2 and bss2['beacon_ie'] == bss2['ie']:
raise Exception("Second scan did find Probe Response frame")
def test_scan_probe_req_events(dev, apdev):
"""Probe Request frame RX events from hostapd"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "open"})
hapd2 = hostapd.Hostapd(apdev[0]['ifname'])
if "OK" not in hapd2.mon.request("ATTACH probe_rx_events=1"):
raise Exception("Failed to register for events")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
ev = hapd2.wait_event(["RX-PROBE-REQUEST"], timeout=5)
if ev is None:
raise Exception("RX-PROBE-REQUEST not reported")
if "sa=" + dev[0].own_addr() not in ev:
raise Exception("Unexpected event parameters: " + ev)
ev = hapd.wait_event(["RX-PROBE-REQUEST"], timeout=0.1)
if ev is not None:
raise Exception("Unexpected RX-PROBE-REQUEST")
if "OK" not in hapd2.mon.request("ATTACH probe_rx_events=0"):
raise Exception("Failed to update event registration")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
ev = hapd2.wait_event(["RX-PROBE-REQUEST"], timeout=0.5)
if ev is not None:
raise Exception("Unexpected RX-PROBE-REQUEST")
tests = ["probe_rx_events", "probe_rx_events=-1", "probe_rx_events=2"]
for val in tests:
if "FAIL" not in hapd2.mon.request("ATTACH " + val):
raise Exception("Invalid ATTACH command accepted")
def elem_capab(capab):
# Nontransmitted BSSID Capability element (83 = 0x53)
return struct.pack('<BBH', 83, 2, capab)
def elem_ssid(ssid):
# SSID element
return struct.pack('BB', 0, len(ssid)) + ssid.encode()
def elem_bssid_index(index):
# Multiple BSSID-index element (85 = 0x55)
return struct.pack('BBB', 85, 1, index)
def elem_multibssid(profiles, max_bssid_indic):
# TODO: add support for fragmenting over multiple Multiple BSSID elements
if 1 + len(profiles) > 255:
raise Exception("Too long Multiple BSSID element")
elem = struct.pack('BBB', 71, 1 + len(profiles), max_bssid_indic) + profiles
return binascii.hexlify(elem).decode()
def run_scans(dev, check):
for i in range(2):
dev.request("SCAN TYPE=ONLY freq=2412")
ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
if ev is None:
raise Exception("Scan did not complete")
# TODO: Check IEs
for (bssid, ssid, capab) in check:
bss = dev.get_bss(bssid)
if bss is None:
raise Exception("AP " + bssid + " missing from scan results")
logger.info("AP " + bssid + ": " + str(bss))
if bss['ssid'] != ssid:
raise Exception("Unexpected AP " + bssid + " SSID")
if int(bss['capabilities'], 16) != capab:
raise Exception("Unexpected AP " + bssid + " capabilities")
def check_multibss_sta_capa(dev):
res = dev.get_capability("multibss")
if res is None or 'MULTIBSS-STA' not in res:
raise HwsimSkip("Multi-BSS STA functionality not supported")
def test_scan_multi_bssid(dev, apdev):
"""Scan and Multiple BSSID element"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
params = {"ssid": "test-scan"}
# Max BSSID Indicator 0 (max 1 BSSID) and no subelements
params['vendor_elements'] = elem_multibssid(b'', 0)
hostapd.add_ap(apdev[0], params)
params = {"ssid": "test-scan"}
elems = elem_capab(0x0401) + elem_ssid("1") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
params['vendor_elements'] = elem_multibssid(profile1, 1)
hostapd.add_ap(apdev[1], params)
bssid0 = apdev[0]['bssid']
bssid1 = apdev[1]['bssid']
check = [(bssid0, 'test-scan', 0x401),
(bssid1, 'test-scan', 0x401),
(bssid1[0:16] + '1', '1', 0x401)]
run_scans(dev[0], check)
def test_scan_multi_bssid_2(dev, apdev):
"""Scan and Multiple BSSID element (2)"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
params = {"ssid": "transmitted"}
# Duplicated entry for the transmitted BSS (not a normal use case)
elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1)
profile2 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted_2") + elem_bssid_index(2)
profile3 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2 + profile3
params['vendor_elements'] = elem_multibssid(profiles, 4)
hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
check = [(bssid, 'transmitted', 0x401),
(bssid[0:16] + '1', 'nontransmitted', 0x1),
(bssid[0:16] + '2', 'nontransmitted_2', 0x1)]
run_scans(dev[0], check)
def test_scan_multi_bssid_3(dev, apdev):
"""Scan and Multiple BSSID element (3)"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
params = {"ssid": "transmitted"}
# Duplicated nontransmitted BSS (not a normal use case)
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1)
profile2 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2
params['vendor_elements'] = elem_multibssid(profiles, 2)
hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
check = [(bssid, 'transmitted', 0x401),
(bssid[0:16] + '1', 'nontransmitted', 0x1)]
run_scans(dev[0], check)
def test_scan_multi_bssid_4(dev, apdev):
"""Scan and Multiple BSSID element (3)"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
# Transmitted BSSID is not the first one in the block
bssid = apdev[0]['bssid']
hapd = None
try:
params = {"ssid": "transmitted",
"bssid": bssid[0:16] + '1'}
elems = elem_capab(1) + elem_ssid("1") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("2") + elem_bssid_index(2)
profile2 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("3") + elem_bssid_index(3)
profile3 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2 + profile3
params['vendor_elements'] = elem_multibssid(profiles, 2)
hapd = hostapd.add_ap(apdev[0], params)
check = [(bssid[0:16] + '1', 'transmitted', 0x401),
(bssid[0:16] + '2', '1', 0x1),
(bssid[0:16] + '3', '2', 0x1),
(bssid[0:16] + '0', '3', 0x1)]
run_scans(dev[0], check)
finally:
if hapd:
hapd.disable()
hapd.set('bssid', bssid)
hapd.enable()
def test_scan_multi_bssid_check_ie(dev, apdev):
"""Scan and check if nontransmitting BSS inherits IE from transmitting BSS"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
params = {"ssid": "transmitted"}
# Duplicated entry for the transmitted BSS (not a normal use case)
elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1)
profile2 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2
params['vendor_elements'] = elem_multibssid(profiles, 2)
hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
for i in range(10):
dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15)
if ev is None:
raise Exception("Scan did not complete")
if dev[0].get_bss(bssid):
break
for i in range(10):
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
bss = dev[0].get_bss(bssid)
if 'beacon_ie' in bss:
break
trans_bss = dev[0].get_bss(bssid)
if trans_bss is None:
raise Exception("AP " + bssid + " missing from scan results")
if not trans_bss or 'beacon_ie' not in trans_bss:
raise Exception("beacon_ie not present in trans_bss")
beacon_ie = parse_ie(trans_bss['beacon_ie'])
logger.info("trans_bss beacon_ie: " + str(list(beacon_ie.keys())))
bssid = bssid[0:16] + '1'
nontrans_bss1 = dev[0].get_bss(bssid)
if nontrans_bss1 is None:
raise Exception("AP " + bssid + " missing from scan results")
if not trans_bss or 'beacon_ie' not in nontrans_bss1:
raise Exception("beacon_ie not present in nontrans_bss1")
nontx_beacon_ie = parse_ie(nontrans_bss1['beacon_ie'])
logger.info("nontrans_bss1 beacon_ie: " + str(list(nontx_beacon_ie.keys())))
if 71 in list(beacon_ie.keys()):
ie_list = list(beacon_ie.keys())
ie_list.remove(71)
nontx_ie_list = list(nontx_beacon_ie.keys())
try:
nontx_ie_list.remove(85)
except ValueError:
pass
if sorted(ie_list) != sorted(nontx_ie_list):
raise Exception("check IE failed")
def elem_fms1():
# this FMS IE has 1 FMS counter
fms_counters = struct.pack('B', 0x39)
fms_ids = struct.pack('B', 0x01)
return struct.pack('BBB', 86, 3, 1) + fms_counters + fms_ids
def elem_fms2():
# this FMS IE has 2 FMS counters
fms_counters = struct.pack('BB', 0x29, 0x32)
fms_ids = struct.pack('BB', 0x01, 0x02)
return struct.pack('BBB', 86, 5, 2) + fms_counters + fms_ids
def test_scan_multi_bssid_fms(dev, apdev):
"""Non-transmitting BSS has different FMS IE from transmitting BSS"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
params = {"ssid": "transmitted"}
# construct transmitting BSS Beacon with FMS IE
elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0) + elem_fms1()
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) + elem_fms2()
profile2 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2
params['vendor_elements'] = elem_multibssid(profiles, 2) + binascii.hexlify(elem_fms1()).decode()
hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
for i in range(10):
dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15)
if ev is None:
raise Exception("Scan did not complete")
if dev[0].get_bss(bssid):
break
for i in range(10):
dev[0].scan_for_bss(bssid, freq=2412, force_scan=True)
bss = dev[0].get_bss(bssid)
if 'beacon_ie' in bss:
break
trans_bss = dev[0].get_bss(bssid)
if trans_bss is None:
raise Exception("AP " + bssid + " missing from scan results")
if not trans_bss or 'beacon_ie' not in trans_bss:
raise Exception("beacon_ie not present in trans_bss")
beacon_ie = parse_ie(trans_bss['beacon_ie'])
trans_bss_fms = beacon_ie[86]
logger.info("trans_bss fms ie: " + binascii.hexlify(trans_bss_fms).decode())
bssid = bssid[0:16] + '1'
nontrans_bss1 = dev[0].get_bss(bssid)
if nontrans_bss1 is None:
raise Exception("AP " + bssid + " missing from scan results")
if not nontrans_bss1 or 'beacon_ie' not in nontrans_bss1:
raise Exception("beacon_ie not present in nontrans_bss1")
nontrans_beacon_ie = parse_ie(nontrans_bss1['beacon_ie'])
nontrans_bss_fms = nontrans_beacon_ie[86]
logger.info("nontrans_bss fms ie: " + binascii.hexlify(nontrans_bss_fms).decode())
if binascii.hexlify(trans_bss_fms) == binascii.hexlify(nontrans_bss_fms):
raise Exception("Nontrans BSS has the same FMS IE as trans BSS")
def test_scan_multiple_mbssid_ie(dev, apdev):
"""Transmitting BSS has 2 MBSSID IE"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
bssid = apdev[0]['bssid']
logger.info("bssid: " + bssid)
hapd = None
# construct 2 MBSSID IEs, each MBSSID IE contains 1 profile
params = {"ssid": "transmitted",
"bssid": bssid}
elems = elem_capab(1) + elem_ssid("1") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(2) + elem_ssid("2") + elem_bssid_index(2)
profile2 = struct.pack('BB', 0, len(elems)) + elems
params['vendor_elements'] = elem_multibssid(profile1, 2) + elem_multibssid(profile2, 2)
hapd = hostapd.add_ap(apdev[0], params)
check = [(bssid, 'transmitted', 0x401),
(bssid[0:16] + '1', '1', 0x1),
(bssid[0:16] + '2', '2', 0x2)]
run_scans(dev[0], check)
def test_scan_mbssid_hidden_ssid(dev, apdev):
"""Non-transmitting BSS has hidden SSID"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
bssid = apdev[0]['bssid']
logger.info("bssid: " + bssid)
hapd = None
# construct 2 MBSSID IEs, each MBSSID IE contains 1 profile
params = {"ssid": "transmitted",
"bssid": bssid}
elems = elem_capab(1) + elem_ssid("") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(2) + elem_ssid("2") + elem_bssid_index(2)
profile2 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2
params['vendor_elements'] = elem_multibssid(profiles, 2)
hapd = hostapd.add_ap(apdev[0], params)
check = [(bssid, 'transmitted', 0x401),
(bssid[0:16] + '1', '', 0x1),
(bssid[0:16] + '2', '2', 0x2)]
run_scans(dev[0], check)
def test_connect_mbssid_open_1(dev, apdev):
"""Connect to transmitting and nontransmitting BSS in open mode"""
check_multibss_sta_capa(dev[0])
dev[0].flush_scan_cache()
bssid = apdev[0]['bssid']
params = {"ssid": "transmitted"}
elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1)
profile1 = struct.pack('BB', 0, len(elems)) + elems
elems = elem_capab(1) + elem_ssid("nontransmitted_2") + elem_bssid_index(2)
profile2 = struct.pack('BB', 0, len(elems)) + elems
profiles = profile1 + profile2
params['vendor_elements'] = elem_multibssid(profiles, 4)
hostapd.add_ap(apdev[0], params)
dev[0].connect("transmitted", key_mgmt="NONE", scan_freq="2412")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
dev[0].dump_monitor()
dev[0].connect("nontransmitted", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=10)
if ev is None:
raise Exception("Connection attempt to nontransmitted BSS not started")
if "02:00:00:00:03:01 (SSID='nontransmitted'" not in ev:
raise Exception("Unexpected authentication target")
# hostapd does not yet support Multiple-BSSID, so only verify that STA is
# able to start connection attempt.
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
dev[0].connect("nontransmitted_2", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=10)
if ev is None:
raise Exception("Connection attempt to nontransmitted BSS not started")
if "02:00:00:00:03:02 (SSID='nontransmitted_2'" not in ev:
raise Exception("Unexpected authentication target")
# hostapd does not yet support Multiple-BSSID, so only verify that STA is
# able to start connection attempt.
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
Reference in a new issue View git blame Copy permalink