jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/tests/hwsim/test_connect_cmd.py
Jouni Malinen dafe0b6429 tests: Clean up at the end of connect_cmd_disconnect_event 
This test case used to leave the dynamically added wlan5 interface in a
state where it was still trying to reconnect to a network. This could
result in the following test cases being unable to clear the cfg80211
scan cache. Avoid this type of issues by explicitly stopping the
connection attempt and making sure that there are no scan results in the
cache at the end of connect_cmd_disconnect_event.

The following test case sequence triggered a failure due to the
remaining BSS table entry:
connect_cmd_disconnect_event connect_cmd_wep ap_hs20_random_mac_addr

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:29:32 +02:00

190 lines
7.4 KiB
Python
Raw Blame History

# cfg80211 connect command (SME in the driver/firmware)
# Copyright (c) 2013, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import logging
logger = logging.getLogger()
import time
import hwsim_utils
import hostapd
from wpasupplicant import WpaSupplicant
from p2p_utils import *
def test_connect_cmd_open(dev, apdev):
"""Open connection using cfg80211 connect command"""
params = { "ssid": "sta-connect",
"manage_p2p": "1",
"allow_cross_connection": "1" }
hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
bg_scan_period="1")
wpas.dump_monitor()
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_wep(dev, apdev):
"""WEP Open System using cfg80211 connect command"""
params = { "ssid": "sta-connect-wep", "wep_key0": '"hello"' }
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
wep_key0='"hello"')
wpas.dump_monitor()
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_wep_shared(dev, apdev):
"""WEP Shared key using cfg80211 connect command"""
params = { "ssid": "sta-connect-wep", "wep_key0": '"hello"',
"auth_algs": "2" }
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
id = wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
auth_alg="SHARED", wep_key0='"hello"')
wpas.dump_monitor()
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
wpas.remove_network(id)
wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
auth_alg="OPEN SHARED", wep_key0='"hello"')
wpas.dump_monitor()
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_p2p_management(dev, apdev):
"""Open connection using cfg80211 connect command and AP using P2P management"""
params = { "ssid": "sta-connect",
"manage_p2p": "1",
"allow_cross_connection": "0" }
hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")
wpas.dump_monitor()
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_wpa2_psk(dev, apdev):
"""WPA2-PSK connection using cfg80211 connect command"""
params = hostapd.wpa2_params(ssid="sta-connect", passphrase="12345678")
hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", psk="12345678", scan_freq="2412")
wpas.dump_monitor()
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_concurrent_grpform_while_connecting(dev, apdev):
"""Concurrent P2P group formation while connecting to an AP using cfg80211 connect command"""
logger.info("Start connection to an infrastructure AP")
hapd = hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" })
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("test-open", key_mgmt="NONE", wait_connect=False)
wpas.dump_monitor()
logger.info("Form a P2P group while connecting to an AP")
wpas.request("SET p2p_no_group_iface 0")
[i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_freq=2412,
r_dev=wpas, r_freq=2412)
check_grpform_results(i_res, r_res)
remove_group(dev[0], wpas)
wpas.dump_monitor()
logger.info("Confirm AP connection after P2P group removal")
hwsim_utils.test_connectivity(wpas, hapd)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
def test_connect_cmd_reject_assoc(dev, apdev):
"""Connection using cfg80211 connect command getting rejected"""
params = { "ssid": "sta-connect",
"require_ht": "1" }
hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
disable_ht="1", wait_connect=False)
# Reject event gets reported twice since we force connect command to be used
# with a driver that supports auth+assoc for testing purposes.
for i in range(0, 2):
ev = wpas.wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=15)
if ev is None:
raise Exception("Association rejection timed out")
if "status_code=27" not in ev:
raise Exception("Unexpected rejection status code")
wpas.request("DISCONNECT")
wpas.dump_monitor()
def test_connect_cmd_disconnect_event(dev, apdev):
"""Connection using cfg80211 connect command getting disconnected by the AP"""
params = { "ssid": "sta-connect" }
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")
if "OK" not in hapd.request("DEAUTHENTICATE " + wpas.p2p_interface_addr()):
raise Exception("DEAUTHENTICATE command failed")
ev = wpas.wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
if ev is None:
raise Exception("Disconnection event timed out")
# This event was actually based on deauthenticate event since we force
# connect command to be used with a driver that supports auth+assoc for
# testing purposes. Anyway, wait some time to allow the debug log to capture
# the following NL80211_CMD_DISCONNECT event.
time.sleep(0.1)
wpas.dump_monitor()
# Clean up to avoid causing issue for following test cases
wpas.request("REMOVE_NETWORK all")
wpas.wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=2)
wpas.flush_scan_cache()
wpas.dump_monitor()
wpas.interface_remove("wlan5")
del wpas
def test_connect_cmd_roam(dev, apdev):
"""cfg80211 connect command to trigger roam"""
params = { "ssid": "sta-connect" }
hostapd.add_ap(apdev[0]['ifname'], params)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")
wpas.dump_monitor()
hostapd.add_ap(apdev[1]['ifname'], params)
wpas.scan_for_bss(apdev[1]['bssid'], freq=2412, force_scan=True)
wpas.roam(apdev[1]['bssid'])
time.sleep(0.1)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
wpas.dump_monitor()
Reference in a new issue View git blame Copy permalink