hostap/tests/hwsim/test_erp.py
Jouni Malinen acc9a635c8 tests: EAP Re-authentication Protocol (ERP)
This tests RP EAP-Initiate/Re-auth-Start transmission, ERP key
derivation, and EAP-Initiate/Re-auth + EAP-Finish/Re-auth exchange and
rMSK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-04 12:16:29 +02:00

191 lines
8.5 KiB
Python

# EAP Re-authentication Protocol (ERP) tests
# Copyright (c) 2014, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import logging
logger = logging.getLogger()
import hostapd
from test_ap_eap import int_eap_server_params
def test_erp_initiate_reauth_start(dev, apdev):
"""Authenticator sending EAP-Initiate/Re-auth-Start, but ERP disabled on peer"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PAX", identity="pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
scan_freq="2412")
def test_erp_enabled_on_server(dev, apdev):
"""ERP enabled on internal EAP server, but disabled on peer"""
params = int_eap_server_params()
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
params['eap_server_erp'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PAX", identity="pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
scan_freq="2412")
def test_erp(dev, apdev):
"""ERP enabled on server and peer"""
capab = dev[0].get_capability("erp")
if not capab or 'ERP' not in capab:
return "skip"
params = int_eap_server_params()
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
params['eap_server_erp'] = '1'
params['disable_pmksa_caching'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PSK", identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
erp="1", scan_freq="2412")
for i in range(3):
dev[0].request("DISCONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=15)
if ev is None:
raise Exception("Disconnection timed out")
dev[0].request("RECONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
if ev is None:
raise Exception("EAP success timed out")
if "EAP re-authentication completed successfully" not in ev:
raise Exception("Did not use ERP")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15)
if ev is None:
raise Exception("Reconnection timed out")
def start_erp_as(apdev):
params = { "ssid": "as", "beacon_int": "2000",
"radius_server_clients": "auth_serv/radius_clients.conf",
"radius_server_auth_port": '18128',
"eap_server": "1",
"eap_user_file": "auth_serv/eap_user.conf",
"ca_cert": "auth_serv/ca.pem",
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key",
"eap_sim_db": "unix:/tmp/hlr_auc_gw.sock",
"dh_file": "auth_serv/dh.conf",
"pac_opaque_encr_key": "000102030405060708090a0b0c0d0e0f",
"eap_fast_a_id": "101112131415161718191a1b1c1d1e1f",
"eap_fast_a_id_info": "test server",
"eap_server_erp": "1",
"erp_domain": "example.com" }
hostapd.add_ap(apdev['ifname'], params)
def test_erp_radius(dev, apdev):
"""ERP enabled on RADIUS server and peer"""
capab = dev[0].get_capability("erp")
if not capab or 'ERP' not in capab:
return "skip"
start_erp_as(apdev[1])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
params['disable_pmksa_caching'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PSK", identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
erp="1", scan_freq="2412")
for i in range(3):
dev[0].request("DISCONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=15)
if ev is None:
raise Exception("Disconnection timed out")
dev[0].request("RECONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
if ev is None:
raise Exception("EAP success timed out")
if "EAP re-authentication completed successfully" not in ev:
raise Exception("Did not use ERP")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15)
if ev is None:
raise Exception("Reconnection timed out")
def erp_test(dev, hapd, **kwargs):
hapd.dump_monitor()
dev.dump_monitor()
dev.request("ERP_FLUSH")
id = dev.connect("test-wpa2-eap", key_mgmt="WPA-EAP", erp="1",
scan_freq="2412", **kwargs)
dev.request("DISCONNECT")
ev = dev.wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=15)
if ev is None:
raise Exception("Disconnection timed out")
hapd.dump_monitor()
dev.request("RECONNECT")
ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15)
if ev is None:
raise Exception("EAP success timed out")
if "EAP re-authentication completed successfully" not in ev:
raise Exception("Did not use ERP")
ev = dev.wait_event(["CTRL-EVENT-CONNECTED"], timeout=15)
if ev is None:
raise Exception("Reconnection timed out")
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if ev is None:
raise Exception("No connection event received from hostapd")
dev.request("DISCONNECT")
def test_erp_radius_eap_methods(dev, apdev):
"""ERP enabled on RADIUS server and peer"""
capab = dev[0].get_capability("erp")
if not capab or 'ERP' not in capab:
return "skip"
start_erp_as(apdev[1])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
params['disable_pmksa_caching'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
erp_test(dev[0], hapd, eap="AKA", identity="0232010000000000@example.com",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
erp_test(dev[0], hapd, eap="AKA'", identity="6555444333222111@example.com",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
# TODO: EKE getSession
#erp_test(dev[0], hapd, eap="EKE", identity="erp-eke@example.com",
# password="hello")
erp_test(dev[0], hapd, eap="FAST", identity="erp-fast@example.com",
password="password", ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth_erp")
erp_test(dev[0], hapd, eap="GPSK", identity="erp-gpsk@example.com",
password="abcdefghijklmnop0123456789abcdef")
erp_test(dev[0], hapd, eap="PAX", identity="erp-pax@example.com",
password_hex="0123456789abcdef0123456789abcdef")
# TODO: PEAP (EMSK)
#erp_test(dev[0], hapd, eap="PEAP", identity="erp-peap@example.com",
# password="password", ca_cert="auth_serv/ca.pem",
# phase2="auth=MSCHAPV2")
erp_test(dev[0], hapd, eap="PSK", identity="erp-psk@example.com",
password_hex="0123456789abcdef0123456789abcdef")
erp_test(dev[0], hapd, eap="PWD", identity="erp-pwd@example.com",
password="secret password")
erp_test(dev[0], hapd, eap="SAKE", identity="erp-sake@example.com",
password_hex="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef")
erp_test(dev[0], hapd, eap="SIM", identity="1232010000000000@example.com",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
erp_test(dev[0], hapd, eap="TLS", identity="erp-tls@example.com",
ca_cert="auth_serv/ca.pem", client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
erp_test(dev[0], hapd, eap="TTLS", identity="erp-ttls@example.com",
password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP")