hostap/src/ap/beacon.c
Jouni Malinen 0e8a96a911 Get rid of struct hostapd_driver_ops abstraction
This is not needed anymore and just makes things more difficult
to understand, so move the remaining function pointers to direct
function calls and get rid of the struct hostapd_driver_ops.
2010-11-24 16:50:06 +02:00

529 lines
14 KiB
C

/*
* hostapd / IEEE 802.11 Management: Beacon and Probe Request/Response
* Copyright (c) 2002-2004, Instant802 Networks, Inc.
* Copyright (c) 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2008-2009, Jouni Malinen <j@w1.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Alternatively, this software may be distributed under the terms of BSD
* license.
*
* See README and COPYING for more details.
*/
#include "utils/includes.h"
#ifndef CONFIG_NATIVE_WINDOWS
#include "utils/common.h"
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"
#include "drivers/driver.h"
#include "wps/wps_defs.h"
#include "p2p/p2p.h"
#include "hostapd.h"
#include "ieee802_11.h"
#include "wpa_auth.h"
#include "wmm.h"
#include "ap_config.h"
#include "sta_info.h"
#include "p2p_hostapd.h"
#include "ap_drv_ops.h"
#include "beacon.h"
static u8 ieee802_11_erp_info(struct hostapd_data *hapd)
{
u8 erp = 0;
if (hapd->iface->current_mode == NULL ||
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return 0;
switch (hapd->iconf->cts_protection_type) {
case CTS_PROTECTION_FORCE_ENABLED:
erp |= ERP_INFO_NON_ERP_PRESENT | ERP_INFO_USE_PROTECTION;
break;
case CTS_PROTECTION_FORCE_DISABLED:
erp = 0;
break;
case CTS_PROTECTION_AUTOMATIC:
if (hapd->iface->olbc)
erp |= ERP_INFO_USE_PROTECTION;
/* continue */
case CTS_PROTECTION_AUTOMATIC_NO_OLBC:
if (hapd->iface->num_sta_non_erp > 0) {
erp |= ERP_INFO_NON_ERP_PRESENT |
ERP_INFO_USE_PROTECTION;
}
break;
}
if (hapd->iface->num_sta_no_short_preamble > 0 ||
hapd->iconf->preamble == LONG_PREAMBLE)
erp |= ERP_INFO_BARKER_PREAMBLE_MODE;
return erp;
}
static u8 * hostapd_eid_ds_params(struct hostapd_data *hapd, u8 *eid)
{
*eid++ = WLAN_EID_DS_PARAMS;
*eid++ = 1;
*eid++ = hapd->iconf->channel;
return eid;
}
static u8 * hostapd_eid_erp_info(struct hostapd_data *hapd, u8 *eid)
{
if (hapd->iface->current_mode == NULL ||
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return eid;
/* Set NonERP_present and use_protection bits if there
* are any associated NonERP stations. */
/* TODO: use_protection bit can be set to zero even if
* there are NonERP stations present. This optimization
* might be useful if NonERP stations are "quiet".
* See 802.11g/D6 E-1 for recommended practice.
* In addition, Non ERP present might be set, if AP detects Non ERP
* operation on other APs. */
/* Add ERP Information element */
*eid++ = WLAN_EID_ERP_INFO;
*eid++ = 1;
*eid++ = ieee802_11_erp_info(hapd);
return eid;
}
static u8 * hostapd_eid_country_add(u8 *pos, u8 *end, int chan_spacing,
struct hostapd_channel_data *start,
struct hostapd_channel_data *prev)
{
if (end - pos < 3)
return pos;
/* first channel number */
*pos++ = start->chan;
/* number of channels */
*pos++ = (prev->chan - start->chan) / chan_spacing + 1;
/* maximum transmit power level */
*pos++ = start->max_tx_power;
return pos;
}
static u8 * hostapd_eid_country(struct hostapd_data *hapd, u8 *eid,
int max_len)
{
u8 *pos = eid;
u8 *end = eid + max_len;
int i;
struct hostapd_hw_modes *mode;
struct hostapd_channel_data *start, *prev;
int chan_spacing = 1;
if (!hapd->iconf->ieee80211d || max_len < 6 ||
hapd->iface->current_mode == NULL)
return eid;
*pos++ = WLAN_EID_COUNTRY;
pos++; /* length will be set later */
os_memcpy(pos, hapd->iconf->country, 3); /* e.g., 'US ' */
pos += 3;
mode = hapd->iface->current_mode;
if (mode->mode == HOSTAPD_MODE_IEEE80211A)
chan_spacing = 4;
start = prev = NULL;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *chan = &mode->channels[i];
if (chan->flag & HOSTAPD_CHAN_DISABLED)
continue;
if (start && prev &&
prev->chan + chan_spacing == chan->chan &&
start->max_tx_power == chan->max_tx_power) {
prev = chan;
continue; /* can use same entry */
}
if (start) {
pos = hostapd_eid_country_add(pos, end, chan_spacing,
start, prev);
start = NULL;
}
/* Start new group */
start = prev = chan;
}
if (start) {
pos = hostapd_eid_country_add(pos, end, chan_spacing,
start, prev);
}
if ((pos - eid) & 1) {
if (end - pos < 1)
return eid;
*pos++ = 0; /* pad for 16-bit alignment */
}
eid[1] = (pos - eid) - 2;
return pos;
}
static u8 * hostapd_eid_wpa(struct hostapd_data *hapd, u8 *eid, size_t len,
struct sta_info *sta)
{
const u8 *ie;
size_t ielen;
ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &ielen);
if (ie == NULL || ielen > len)
return eid;
os_memcpy(eid, ie, ielen);
return eid + ielen;
}
void handle_probe_req(struct hostapd_data *hapd,
const struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_mgmt *resp;
struct ieee802_11_elems elems;
char *ssid;
u8 *pos, *epos;
const u8 *ie;
size_t ssid_len, ie_len;
struct sta_info *sta = NULL;
size_t buflen;
size_t i;
ie = mgmt->u.probe_req.variable;
ie_len = len - (IEEE80211_HDRLEN + sizeof(mgmt->u.probe_req));
for (i = 0; hapd->probereq_cb && i < hapd->num_probereq_cb; i++)
if (hapd->probereq_cb[i].cb(hapd->probereq_cb[i].ctx,
mgmt->sa, ie, ie_len) > 0)
return;
if (!hapd->iconf->send_probe_response)
return;
if (ieee802_11_parse_elems(ie, ie_len, &elems, 0) == ParseFailed) {
wpa_printf(MSG_DEBUG, "Could not parse ProbeReq from " MACSTR,
MAC2STR(mgmt->sa));
return;
}
ssid = NULL;
ssid_len = 0;
if ((!elems.ssid || !elems.supp_rates)) {
wpa_printf(MSG_DEBUG, "STA " MACSTR " sent probe request "
"without SSID or supported rates element",
MAC2STR(mgmt->sa));
return;
}
#ifdef CONFIG_P2P
if (hapd->p2p && elems.wps_ie) {
struct wpabuf *wps;
wps = ieee802_11_vendor_ie_concat(ie, ie_len, WPS_DEV_OUI_WFA);
if (wps && !p2p_group_match_dev_type(hapd->p2p_group, wps)) {
wpa_printf(MSG_MSGDUMP, "P2P: Ignore Probe Request "
"due to mismatch with Requested Device "
"Type");
wpabuf_free(wps);
return;
}
wpabuf_free(wps);
}
#endif /* CONFIG_P2P */
if (hapd->conf->ignore_broadcast_ssid && elems.ssid_len == 0) {
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " for "
"broadcast SSID ignored", MAC2STR(mgmt->sa));
return;
}
sta = ap_get_sta(hapd, mgmt->sa);
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_GROUP_OWNER) &&
elems.ssid_len == P2P_WILDCARD_SSID_LEN &&
os_memcmp(elems.ssid, P2P_WILDCARD_SSID,
P2P_WILDCARD_SSID_LEN) == 0) {
/* Process P2P Wildcard SSID like Wildcard SSID */
elems.ssid_len = 0;
}
#endif /* CONFIG_P2P */
if (elems.ssid_len == 0 ||
(elems.ssid_len == hapd->conf->ssid.ssid_len &&
os_memcmp(elems.ssid, hapd->conf->ssid.ssid, elems.ssid_len) ==
0)) {
ssid = hapd->conf->ssid.ssid;
ssid_len = hapd->conf->ssid.ssid_len;
if (sta)
sta->ssid_probe = &hapd->conf->ssid;
}
if (!ssid) {
if (!(mgmt->da[0] & 0x01)) {
char ssid_txt[33];
ieee802_11_print_ssid(ssid_txt, elems.ssid,
elems.ssid_len);
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
" for foreign SSID '%s' (DA " MACSTR ")",
MAC2STR(mgmt->sa), ssid_txt,
MAC2STR(mgmt->da));
}
return;
}
/* TODO: verify that supp_rates contains at least one matching rate
* with AP configuration */
#define MAX_PROBERESP_LEN 768
buflen = MAX_PROBERESP_LEN;
#ifdef CONFIG_WPS
if (hapd->wps_probe_resp_ie)
buflen += wpabuf_len(hapd->wps_probe_resp_ie);
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if (hapd->p2p_probe_resp_ie)
buflen += wpabuf_len(hapd->p2p_probe_resp_ie);
#endif /* CONFIG_P2P */
resp = os_zalloc(buflen);
if (resp == NULL)
return;
epos = ((u8 *) resp) + MAX_PROBERESP_LEN;
resp->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_PROBE_RESP);
os_memcpy(resp->da, mgmt->sa, ETH_ALEN);
os_memcpy(resp->sa, hapd->own_addr, ETH_ALEN);
os_memcpy(resp->bssid, hapd->own_addr, ETH_ALEN);
resp->u.probe_resp.beacon_int =
host_to_le16(hapd->iconf->beacon_int);
/* hardware or low-level driver will setup seq_ctrl and timestamp */
resp->u.probe_resp.capab_info =
host_to_le16(hostapd_own_capab_info(hapd, sta, 1));
pos = resp->u.probe_resp.variable;
*pos++ = WLAN_EID_SSID;
*pos++ = ssid_len;
os_memcpy(pos, ssid, ssid_len);
pos += ssid_len;
/* Supported rates */
pos = hostapd_eid_supp_rates(hapd, pos);
/* DS Params */
pos = hostapd_eid_ds_params(hapd, pos);
pos = hostapd_eid_country(hapd, pos, epos - pos);
/* ERP Information element */
pos = hostapd_eid_erp_info(hapd, pos);
/* Extended supported rates */
pos = hostapd_eid_ext_supp_rates(hapd, pos);
/* RSN, MDIE, WPA */
pos = hostapd_eid_wpa(hapd, pos, epos - pos, sta);
#ifdef CONFIG_IEEE80211N
pos = hostapd_eid_ht_capabilities(hapd, pos);
pos = hostapd_eid_ht_operation(hapd, pos);
#endif /* CONFIG_IEEE80211N */
/* Wi-Fi Alliance WMM */
pos = hostapd_eid_wmm(hapd, pos);
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_probe_resp_ie) {
os_memcpy(pos, wpabuf_head(hapd->wps_probe_resp_ie),
wpabuf_len(hapd->wps_probe_resp_ie));
pos += wpabuf_len(hapd->wps_probe_resp_ie);
}
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_ENABLED) && elems.p2p &&
hapd->p2p_probe_resp_ie) {
os_memcpy(pos, wpabuf_head(hapd->p2p_probe_resp_ie),
wpabuf_len(hapd->p2p_probe_resp_ie));
pos += wpabuf_len(hapd->p2p_probe_resp_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_P2P_MANAGER
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
P2P_MANAGE)
pos = hostapd_eid_p2p_manage(hapd, pos);
#endif /* CONFIG_P2P_MANAGER */
if (hostapd_drv_send_mlme(hapd, resp, pos - (u8 *) resp) < 0)
perror("handle_probe_req: send");
os_free(resp);
wpa_printf(MSG_EXCESSIVE, "STA " MACSTR " sent probe request for %s "
"SSID", MAC2STR(mgmt->sa),
elems.ssid_len == 0 ? "broadcast" : "our");
}
void ieee802_11_set_beacon(struct hostapd_data *hapd)
{
struct ieee80211_mgmt *head;
u8 *pos, *tail, *tailpos;
u16 capab_info;
size_t head_len, tail_len;
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & (P2P_ENABLED | P2P_GROUP_OWNER)) == P2P_ENABLED)
goto no_beacon;
#endif /* CONFIG_P2P */
#define BEACON_HEAD_BUF_SIZE 256
#define BEACON_TAIL_BUF_SIZE 512
head = os_zalloc(BEACON_HEAD_BUF_SIZE);
tail_len = BEACON_TAIL_BUF_SIZE;
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_beacon_ie)
tail_len += wpabuf_len(hapd->wps_beacon_ie);
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if (hapd->p2p_beacon_ie)
tail_len += wpabuf_len(hapd->p2p_beacon_ie);
#endif /* CONFIG_P2P */
tailpos = tail = os_malloc(tail_len);
if (head == NULL || tail == NULL) {
wpa_printf(MSG_ERROR, "Failed to set beacon data");
os_free(head);
os_free(tail);
return;
}
head->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_BEACON);
head->duration = host_to_le16(0);
os_memset(head->da, 0xff, ETH_ALEN);
os_memcpy(head->sa, hapd->own_addr, ETH_ALEN);
os_memcpy(head->bssid, hapd->own_addr, ETH_ALEN);
head->u.beacon.beacon_int =
host_to_le16(hapd->iconf->beacon_int);
/* hardware or low-level driver will setup seq_ctrl and timestamp */
capab_info = hostapd_own_capab_info(hapd, NULL, 0);
head->u.beacon.capab_info = host_to_le16(capab_info);
pos = &head->u.beacon.variable[0];
/* SSID */
*pos++ = WLAN_EID_SSID;
if (hapd->conf->ignore_broadcast_ssid == 2) {
/* clear the data, but keep the correct length of the SSID */
*pos++ = hapd->conf->ssid.ssid_len;
os_memset(pos, 0, hapd->conf->ssid.ssid_len);
pos += hapd->conf->ssid.ssid_len;
} else if (hapd->conf->ignore_broadcast_ssid) {
*pos++ = 0; /* empty SSID */
} else {
*pos++ = hapd->conf->ssid.ssid_len;
os_memcpy(pos, hapd->conf->ssid.ssid,
hapd->conf->ssid.ssid_len);
pos += hapd->conf->ssid.ssid_len;
}
/* Supported rates */
pos = hostapd_eid_supp_rates(hapd, pos);
/* DS Params */
pos = hostapd_eid_ds_params(hapd, pos);
head_len = pos - (u8 *) head;
tailpos = hostapd_eid_country(hapd, tailpos,
tail + BEACON_TAIL_BUF_SIZE - tailpos);
/* ERP Information element */
tailpos = hostapd_eid_erp_info(hapd, tailpos);
/* Extended supported rates */
tailpos = hostapd_eid_ext_supp_rates(hapd, tailpos);
/* RSN, MDIE, WPA */
tailpos = hostapd_eid_wpa(hapd, tailpos, tail + BEACON_TAIL_BUF_SIZE -
tailpos, NULL);
#ifdef CONFIG_IEEE80211N
tailpos = hostapd_eid_ht_capabilities(hapd, tailpos);
tailpos = hostapd_eid_ht_operation(hapd, tailpos);
#endif /* CONFIG_IEEE80211N */
/* Wi-Fi Alliance WMM */
tailpos = hostapd_eid_wmm(hapd, tailpos);
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && hapd->wps_beacon_ie) {
os_memcpy(tailpos, wpabuf_head(hapd->wps_beacon_ie),
wpabuf_len(hapd->wps_beacon_ie));
tailpos += wpabuf_len(hapd->wps_beacon_ie);
}
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_beacon_ie) {
os_memcpy(tailpos, wpabuf_head(hapd->p2p_beacon_ie),
wpabuf_len(hapd->p2p_beacon_ie));
tailpos += wpabuf_len(hapd->p2p_beacon_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_P2P_MANAGER
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
P2P_MANAGE)
tailpos = hostapd_eid_p2p_manage(hapd, tailpos);
#endif /* CONFIG_P2P_MANAGER */
tail_len = tailpos > tail ? tailpos - tail : 0;
if (hostapd_drv_set_beacon(hapd, (u8 *) head, head_len,
tail, tail_len, hapd->conf->dtim_period,
hapd->iconf->beacon_int))
wpa_printf(MSG_ERROR, "Failed to set beacon head/tail or DTIM "
"period");
os_free(tail);
os_free(head);
#ifdef CONFIG_P2P
no_beacon:
#endif /* CONFIG_P2P */
hostapd_set_bss_params(hapd, !!(ieee802_11_erp_info(hapd) &
ERP_INFO_USE_PROTECTION));
}
void ieee802_11_set_beacons(struct hostapd_iface *iface)
{
size_t i;
for (i = 0; i < iface->num_bss; i++)
ieee802_11_set_beacon(iface->bss[i]);
}
#endif /* CONFIG_NATIVE_WINDOWS */