79e3f08d3c
Add support for missing 6 GHz operating classes as defined in IEEE P802.11ax/D7.0. This is needed to avoid OCV failures on the 6 GHz band when the channel width is larger than 20 MHz. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
516 lines
13 KiB
C
516 lines
13 KiB
C
/*
|
|
* Operating classes
|
|
* Copyright(c) 2015 Intel Deutschland GmbH
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* This software may be distributed under the terms of the BSD license.
|
|
* See README for more details.
|
|
*/
|
|
|
|
#include "utils/includes.h"
|
|
|
|
#include "utils/common.h"
|
|
#include "common/ieee802_11_common.h"
|
|
#include "wpa_supplicant_i.h"
|
|
#include "bss.h"
|
|
|
|
|
|
static enum chan_allowed allow_channel(struct hostapd_hw_modes *mode,
|
|
u8 op_class, u8 chan,
|
|
unsigned int *flags)
|
|
{
|
|
int i;
|
|
int is_6ghz = op_class >= 131 && op_class <= 136;
|
|
|
|
for (i = 0; i < mode->num_channels; i++) {
|
|
int chan_is_6ghz;
|
|
|
|
chan_is_6ghz = mode->channels[i].freq >= 5935 &&
|
|
mode->channels[i].freq <= 7115;
|
|
if (is_6ghz == chan_is_6ghz && mode->channels[i].chan == chan)
|
|
break;
|
|
}
|
|
|
|
if (i == mode->num_channels ||
|
|
(mode->channels[i].flag & HOSTAPD_CHAN_DISABLED))
|
|
return NOT_ALLOWED;
|
|
|
|
if (flags)
|
|
*flags = mode->channels[i].flag;
|
|
|
|
if (mode->channels[i].flag & HOSTAPD_CHAN_NO_IR)
|
|
return NO_IR;
|
|
|
|
return ALLOWED;
|
|
}
|
|
|
|
|
|
static int get_center_80mhz(struct hostapd_hw_modes *mode, u8 channel,
|
|
const u8 *center_channels, size_t num_chan)
|
|
{
|
|
size_t i;
|
|
|
|
if (mode->mode != HOSTAPD_MODE_IEEE80211A)
|
|
return 0;
|
|
|
|
for (i = 0; i < num_chan; i++) {
|
|
/*
|
|
* In 80 MHz, the bandwidth "spans" 12 channels (e.g., 36-48),
|
|
* so the center channel is 6 channels away from the start/end.
|
|
*/
|
|
if (channel >= center_channels[i] - 6 &&
|
|
channel <= center_channels[i] + 6)
|
|
return center_channels[i];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static enum chan_allowed verify_80mhz(struct hostapd_hw_modes *mode,
|
|
u8 op_class, u8 channel)
|
|
{
|
|
u8 center_chan;
|
|
unsigned int i;
|
|
unsigned int no_ir = 0;
|
|
const u8 *center_channels;
|
|
size_t num_chan;
|
|
const u8 center_channels_5ghz[] = { 42, 58, 106, 122, 138, 155 };
|
|
const u8 center_channels_6ghz[] = { 7, 23, 39, 55, 71, 87, 103, 119,
|
|
135, 151, 167, 183, 199, 215 };
|
|
|
|
if (is_6ghz_op_class(op_class)) {
|
|
center_channels = center_channels_6ghz;
|
|
num_chan = ARRAY_SIZE(center_channels_6ghz);
|
|
} else {
|
|
center_channels = center_channels_5ghz;
|
|
num_chan = ARRAY_SIZE(center_channels_5ghz);
|
|
}
|
|
|
|
center_chan = get_center_80mhz(mode, channel, center_channels,
|
|
num_chan);
|
|
if (!center_chan)
|
|
return NOT_ALLOWED;
|
|
|
|
/* check all the channels are available */
|
|
for (i = 0; i < 4; i++) {
|
|
unsigned int flags;
|
|
u8 adj_chan = center_chan - 6 + i * 4;
|
|
|
|
if (allow_channel(mode, op_class, adj_chan, &flags) ==
|
|
NOT_ALLOWED)
|
|
return NOT_ALLOWED;
|
|
|
|
if ((i == 0 && !(flags & HOSTAPD_CHAN_VHT_10_70)) ||
|
|
(i == 1 && !(flags & HOSTAPD_CHAN_VHT_30_50)) ||
|
|
(i == 2 && !(flags & HOSTAPD_CHAN_VHT_50_30)) ||
|
|
(i == 3 && !(flags & HOSTAPD_CHAN_VHT_70_10)))
|
|
return NOT_ALLOWED;
|
|
|
|
if (flags & HOSTAPD_CHAN_NO_IR)
|
|
no_ir = 1;
|
|
}
|
|
|
|
if (no_ir)
|
|
return NO_IR;
|
|
|
|
return ALLOWED;
|
|
}
|
|
|
|
|
|
static int get_center_160mhz(struct hostapd_hw_modes *mode, u8 channel,
|
|
const u8 *center_channels, size_t num_chan)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (mode->mode != HOSTAPD_MODE_IEEE80211A)
|
|
return 0;
|
|
|
|
for (i = 0; i < num_chan; i++) {
|
|
/*
|
|
* In 160 MHz, the bandwidth "spans" 28 channels (e.g., 36-64),
|
|
* so the center channel is 14 channels away from the start/end.
|
|
*/
|
|
if (channel >= center_channels[i] - 14 &&
|
|
channel <= center_channels[i] + 14)
|
|
return center_channels[i];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static enum chan_allowed verify_160mhz(struct hostapd_hw_modes *mode,
|
|
u8 op_class, u8 channel)
|
|
{
|
|
u8 center_chan;
|
|
unsigned int i;
|
|
unsigned int no_ir = 0;
|
|
const u8 *center_channels;
|
|
size_t num_chan;
|
|
const u8 center_channels_5ghz[] = { 50, 114 };
|
|
const u8 center_channels_6ghz[] = { 15, 47, 79, 111, 143, 175, 207 };
|
|
|
|
if (is_6ghz_op_class(op_class)) {
|
|
center_channels = center_channels_6ghz;
|
|
num_chan = ARRAY_SIZE(center_channels_6ghz);
|
|
} else {
|
|
center_channels = center_channels_5ghz;
|
|
num_chan = ARRAY_SIZE(center_channels_5ghz);
|
|
}
|
|
|
|
center_chan = get_center_160mhz(mode, channel, center_channels,
|
|
num_chan);
|
|
if (!center_chan)
|
|
return NOT_ALLOWED;
|
|
|
|
/* Check all the channels are available */
|
|
for (i = 0; i < 8; i++) {
|
|
unsigned int flags;
|
|
u8 adj_chan = center_chan - 14 + i * 4;
|
|
|
|
if (allow_channel(mode, op_class, adj_chan, &flags) ==
|
|
NOT_ALLOWED)
|
|
return NOT_ALLOWED;
|
|
|
|
if ((i == 0 && !(flags & HOSTAPD_CHAN_VHT_10_150)) ||
|
|
(i == 1 && !(flags & HOSTAPD_CHAN_VHT_30_130)) ||
|
|
(i == 2 && !(flags & HOSTAPD_CHAN_VHT_50_110)) ||
|
|
(i == 3 && !(flags & HOSTAPD_CHAN_VHT_70_90)) ||
|
|
(i == 4 && !(flags & HOSTAPD_CHAN_VHT_90_70)) ||
|
|
(i == 5 && !(flags & HOSTAPD_CHAN_VHT_110_50)) ||
|
|
(i == 6 && !(flags & HOSTAPD_CHAN_VHT_130_30)) ||
|
|
(i == 7 && !(flags & HOSTAPD_CHAN_VHT_150_10)))
|
|
return NOT_ALLOWED;
|
|
|
|
if (flags & HOSTAPD_CHAN_NO_IR)
|
|
no_ir = 1;
|
|
}
|
|
|
|
if (no_ir)
|
|
return NO_IR;
|
|
|
|
return ALLOWED;
|
|
}
|
|
|
|
|
|
enum chan_allowed verify_channel(struct hostapd_hw_modes *mode, u8 op_class,
|
|
u8 channel, u8 bw)
|
|
{
|
|
unsigned int flag = 0;
|
|
enum chan_allowed res, res2;
|
|
|
|
res2 = res = allow_channel(mode, op_class, channel, &flag);
|
|
if (bw == BW40MINUS || (bw == BW40 && (((channel - 1) / 4) % 2))) {
|
|
if (!(flag & HOSTAPD_CHAN_HT40MINUS))
|
|
return NOT_ALLOWED;
|
|
res2 = allow_channel(mode, op_class, channel - 4, NULL);
|
|
} else if (bw == BW40PLUS ||
|
|
(bw == BW40 && !(((channel - 1) / 4) % 2))) {
|
|
if (!(flag & HOSTAPD_CHAN_HT40PLUS))
|
|
return NOT_ALLOWED;
|
|
res2 = allow_channel(mode, op_class, channel + 4, NULL);
|
|
} else if (bw == BW80) {
|
|
/*
|
|
* channel is a center channel and as such, not necessarily a
|
|
* valid 20 MHz channels. Override earlier allow_channel()
|
|
* result and use only the 80 MHz specific version.
|
|
*/
|
|
res2 = res = verify_80mhz(mode, op_class, channel);
|
|
} else if (bw == BW160) {
|
|
/*
|
|
* channel is a center channel and as such, not necessarily a
|
|
* valid 20 MHz channels. Override earlier allow_channel()
|
|
* result and use only the 160 MHz specific version.
|
|
*/
|
|
res2 = res = verify_160mhz(mode, op_class, channel);
|
|
} else if (bw == BW80P80) {
|
|
/*
|
|
* channel is a center channel and as such, not necessarily a
|
|
* valid 20 MHz channels. Override earlier allow_channel()
|
|
* result and use only the 80 MHz specific version.
|
|
*/
|
|
res2 = res = verify_80mhz(mode, op_class, channel);
|
|
}
|
|
|
|
if (res == NOT_ALLOWED || res2 == NOT_ALLOWED)
|
|
return NOT_ALLOWED;
|
|
|
|
if (res == NO_IR || res2 == NO_IR)
|
|
return NO_IR;
|
|
|
|
return ALLOWED;
|
|
}
|
|
|
|
|
|
static int wpas_op_class_supported(struct wpa_supplicant *wpa_s,
|
|
struct wpa_ssid *ssid,
|
|
const struct oper_class_map *op_class)
|
|
{
|
|
int chan;
|
|
size_t i;
|
|
struct hostapd_hw_modes *mode;
|
|
int found;
|
|
int z;
|
|
int freq2 = 0;
|
|
int freq5 = 0;
|
|
|
|
mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, op_class->mode,
|
|
is_6ghz_op_class(op_class->op_class));
|
|
if (!mode)
|
|
return 0;
|
|
|
|
/* If we are configured to disable certain things, take that into
|
|
* account here. */
|
|
if (ssid && ssid->freq_list && ssid->freq_list[0]) {
|
|
for (z = 0; ; z++) {
|
|
int f = ssid->freq_list[z];
|
|
|
|
if (f == 0)
|
|
break; /* end of list */
|
|
if (f > 4000 && f < 6000)
|
|
freq5 = 1;
|
|
else if (f > 2400 && f < 2500)
|
|
freq2 = 1;
|
|
}
|
|
} else {
|
|
/* No frequencies specified, can use anything hardware supports.
|
|
*/
|
|
freq2 = freq5 = 1;
|
|
}
|
|
|
|
if (op_class->op_class >= 115 && op_class->op_class <= 130 && !freq5)
|
|
return 0;
|
|
if (op_class->op_class >= 81 && op_class->op_class <= 84 && !freq2)
|
|
return 0;
|
|
|
|
#ifdef CONFIG_HT_OVERRIDES
|
|
if (ssid && ssid->disable_ht) {
|
|
switch (op_class->op_class) {
|
|
case 83:
|
|
case 84:
|
|
case 104:
|
|
case 105:
|
|
case 116:
|
|
case 117:
|
|
case 119:
|
|
case 120:
|
|
case 122:
|
|
case 123:
|
|
case 126:
|
|
case 127:
|
|
case 128:
|
|
case 129:
|
|
case 130:
|
|
/* Disable >= 40 MHz channels if HT is disabled */
|
|
return 0;
|
|
}
|
|
}
|
|
#endif /* CONFIG_HT_OVERRIDES */
|
|
|
|
#ifdef CONFIG_VHT_OVERRIDES
|
|
if (ssid && ssid->disable_vht) {
|
|
if (op_class->op_class >= 128 && op_class->op_class <= 130) {
|
|
/* Disable >= 80 MHz channels if VHT is disabled */
|
|
return 0;
|
|
}
|
|
}
|
|
#endif /* CONFIG_VHT_OVERRIDES */
|
|
|
|
if (op_class->op_class == 128) {
|
|
u8 channels[] = { 42, 58, 106, 122, 138, 155 };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(channels); i++) {
|
|
if (verify_channel(mode, op_class->op_class,
|
|
channels[i], op_class->bw) !=
|
|
NOT_ALLOWED)
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (op_class->op_class == 129) {
|
|
/* Check if either 160 MHz channels is allowed */
|
|
return verify_channel(mode, op_class->op_class, 50,
|
|
op_class->bw) != NOT_ALLOWED ||
|
|
verify_channel(mode, op_class->op_class, 114,
|
|
op_class->bw) != NOT_ALLOWED;
|
|
}
|
|
|
|
if (op_class->op_class == 130) {
|
|
/* Need at least two non-contiguous 80 MHz segments */
|
|
found = 0;
|
|
|
|
if (verify_channel(mode, op_class->op_class, 42,
|
|
op_class->bw) != NOT_ALLOWED ||
|
|
verify_channel(mode, op_class->op_class, 58,
|
|
op_class->bw) != NOT_ALLOWED)
|
|
found++;
|
|
if (verify_channel(mode, op_class->op_class, 106,
|
|
op_class->bw) != NOT_ALLOWED ||
|
|
verify_channel(mode, op_class->op_class, 122,
|
|
op_class->bw) != NOT_ALLOWED ||
|
|
verify_channel(mode, op_class->op_class, 138,
|
|
op_class->bw) != NOT_ALLOWED)
|
|
found++;
|
|
if (verify_channel(mode, op_class->op_class, 106,
|
|
op_class->bw) != NOT_ALLOWED &&
|
|
verify_channel(mode, op_class->op_class, 138,
|
|
op_class->bw) != NOT_ALLOWED)
|
|
found++;
|
|
if (verify_channel(mode, op_class->op_class, 155,
|
|
op_class->bw) != NOT_ALLOWED)
|
|
found++;
|
|
|
|
if (found >= 2)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (op_class->op_class == 135) {
|
|
/* Need at least two 80 MHz segments which do not fall under the
|
|
* same 160 MHz segment to support 80+80 in 6 GHz.
|
|
*/
|
|
int first_seg = 0;
|
|
int curr_seg = 0;
|
|
|
|
for (chan = op_class->min_chan; chan <= op_class->max_chan;
|
|
chan += op_class->inc) {
|
|
curr_seg++;
|
|
if (verify_channel(mode, op_class->op_class, chan,
|
|
op_class->bw) != NOT_ALLOWED) {
|
|
if (!first_seg) {
|
|
first_seg = curr_seg;
|
|
continue;
|
|
}
|
|
|
|
/* Supported if at least two non-consecutive 80
|
|
* MHz segments allowed.
|
|
*/
|
|
if ((curr_seg - first_seg) > 1)
|
|
return 1;
|
|
|
|
/* Supported even if the 80 MHz segments are
|
|
* consecutive when they do not fall under the
|
|
* same 160 MHz segment.
|
|
*/
|
|
if ((first_seg % 2) == 0)
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
found = 0;
|
|
for (chan = op_class->min_chan; chan <= op_class->max_chan;
|
|
chan += op_class->inc) {
|
|
if (verify_channel(mode, op_class->op_class, chan,
|
|
op_class->bw) != NOT_ALLOWED) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
|
|
static int wpas_sta_secondary_channel_offset(struct wpa_bss *bss, u8 *current,
|
|
u8 *channel)
|
|
{
|
|
|
|
u8 *ies, phy_type;
|
|
size_t ies_len;
|
|
|
|
if (!bss)
|
|
return -1;
|
|
ies = (u8 *) (bss + 1);
|
|
ies_len = bss->ie_len ? bss->ie_len : bss->beacon_ie_len;
|
|
return wpas_get_op_chan_phy(bss->freq, ies, ies_len, current,
|
|
channel, &phy_type);
|
|
}
|
|
|
|
|
|
size_t wpas_supp_op_class_ie(struct wpa_supplicant *wpa_s,
|
|
struct wpa_ssid *ssid,
|
|
struct wpa_bss *bss, u8 *pos, size_t len)
|
|
{
|
|
struct wpabuf *buf;
|
|
u8 op, current, chan;
|
|
u8 *ie_len;
|
|
size_t res;
|
|
|
|
/*
|
|
* Determine the current operating class correct mode based on
|
|
* advertised BSS capabilities, if available. Fall back to a less
|
|
* accurate guess based on frequency if the needed IEs are not available
|
|
* or used.
|
|
*/
|
|
if (wpas_sta_secondary_channel_offset(bss, ¤t, &chan) < 0 &&
|
|
ieee80211_freq_to_channel_ext(bss->freq, 0, CHANWIDTH_USE_HT,
|
|
¤t, &chan) == NUM_HOSTAPD_MODES)
|
|
return 0;
|
|
|
|
/*
|
|
* Need 3 bytes for EID, length, and current operating class, plus
|
|
* 1 byte for every other supported operating class.
|
|
*/
|
|
buf = wpabuf_alloc(global_op_class_size + 3);
|
|
if (!buf)
|
|
return 0;
|
|
|
|
wpabuf_put_u8(buf, WLAN_EID_SUPPORTED_OPERATING_CLASSES);
|
|
/* Will set the length later, putting a placeholder */
|
|
ie_len = wpabuf_put(buf, 1);
|
|
wpabuf_put_u8(buf, current);
|
|
|
|
for (op = 0; global_op_class[op].op_class; op++) {
|
|
if (wpas_op_class_supported(wpa_s, ssid, &global_op_class[op]))
|
|
wpabuf_put_u8(buf, global_op_class[op].op_class);
|
|
}
|
|
|
|
*ie_len = wpabuf_len(buf) - 2;
|
|
if (*ie_len < 2) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"No supported operating classes IE to add");
|
|
res = 0;
|
|
} else if (wpabuf_len(buf) > len) {
|
|
wpa_printf(MSG_ERROR,
|
|
"Supported operating classes IE exceeds maximum buffer length");
|
|
res = 0;
|
|
} else {
|
|
os_memcpy(pos, wpabuf_head(buf), wpabuf_len(buf));
|
|
res = wpabuf_len(buf);
|
|
wpa_hexdump_buf(MSG_DEBUG,
|
|
"Added supported operating classes IE", buf);
|
|
}
|
|
|
|
wpabuf_free(buf);
|
|
return res;
|
|
}
|
|
|
|
|
|
int * wpas_supp_op_classes(struct wpa_supplicant *wpa_s)
|
|
{
|
|
int op;
|
|
unsigned int pos, max_num = 0;
|
|
int *classes;
|
|
|
|
for (op = 0; global_op_class[op].op_class; op++)
|
|
max_num++;
|
|
classes = os_zalloc((max_num + 1) * sizeof(int));
|
|
if (!classes)
|
|
return NULL;
|
|
|
|
for (op = 0, pos = 0; global_op_class[op].op_class; op++) {
|
|
if (wpas_op_class_supported(wpa_s, NULL, &global_op_class[op]))
|
|
classes[pos++] = global_op_class[op].op_class;
|
|
}
|
|
|
|
return classes;
|
|
}
|