hostap/wpa_supplicant/config_ssid.h
Sunil Dutt 91073ccaaa OWE: Attempt more scans for OWE transition SSID if expected BSS not seen
This commit introduces a threshold for OWE transition BSS selection,
which signifies the maximum number of selection attempts (scans) done
for finding OWE BSS.

This aims to do more scan attempts for OWE BSS and eventually select the
open BSS if the selection/scan attempts for OWE BSS exceed the
configured threshold.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 19:59:26 +03:00

942 lines
25 KiB
C

/*
* WPA Supplicant / Network configuration structures
* Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#ifndef CONFIG_SSID_H
#define CONFIG_SSID_H
#include "common/defs.h"
#include "utils/list.h"
#include "eap_peer/eap_config.h"
#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
EAPOL_FLAG_REQUIRE_KEY_BROADCAST)
#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
#define DEFAULT_FRAGMENT_SIZE 1398
#define DEFAULT_BG_SCAN_PERIOD -1
#define DEFAULT_MESH_MAX_RETRIES 2
#define DEFAULT_MESH_RETRY_TIMEOUT 40
#define DEFAULT_MESH_CONFIRM_TIMEOUT 40
#define DEFAULT_MESH_HOLDING_TIMEOUT 40
#define DEFAULT_MESH_RSSI_THRESHOLD 1 /* no change */
#define DEFAULT_DISABLE_HT 0
#define DEFAULT_DISABLE_HT40 0
#define DEFAULT_DISABLE_SGI 0
#define DEFAULT_DISABLE_LDPC 0
#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
#define DEFAULT_AMPDU_FACTOR -1 /* no change */
#define DEFAULT_AMPDU_DENSITY -1 /* no change */
#define DEFAULT_USER_SELECTED_SIM 1
struct psk_list_entry {
struct dl_list list;
u8 addr[ETH_ALEN];
u8 psk[32];
u8 p2p;
};
/**
* struct wpa_ssid - Network configuration data
*
* This structure includes all the configuration variables for a network. This
* data is included in the per-interface configuration data as an element of
* the network list, struct wpa_config::ssid. Each network block in the
* configuration is mapped to a struct wpa_ssid instance.
*/
struct wpa_ssid {
/**
* next - Next network in global list
*
* This pointer can be used to iterate over all networks. The head of
* this list is stored in the ssid field of struct wpa_config.
*/
struct wpa_ssid *next;
/**
* pnext - Next network in per-priority list
*
* This pointer can be used to iterate over all networks in the same
* priority class. The heads of these list are stored in the pssid
* fields of struct wpa_config.
*/
struct wpa_ssid *pnext;
/**
* id - Unique id for the network
*
* This identifier is used as a unique identifier for each network
* block when using the control interface. Each network is allocated an
* id when it is being created, either when reading the configuration
* file or when a new network is added through the control interface.
*/
int id;
/**
* priority - Priority group
*
* By default, all networks will get same priority group (0). If some
* of the networks are more desirable, this field can be used to change
* the order in which wpa_supplicant goes through the networks when
* selecting a BSS. The priority groups will be iterated in decreasing
* priority (i.e., the larger the priority value, the sooner the
* network is matched against the scan results). Within each priority
* group, networks will be selected based on security policy, signal
* strength, etc.
*
* Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are
* not using this priority to select the order for scanning. Instead,
* they try the networks in the order that used in the configuration
* file.
*/
int priority;
/**
* ssid - Service set identifier (network name)
*
* This is the SSID for the network. For wireless interfaces, this is
* used to select which network will be used. If set to %NULL (or
* ssid_len=0), any SSID can be used. For wired interfaces, this must
* be set to %NULL. Note: SSID may contain any characters, even nul
* (ASCII 0) and as such, this should not be assumed to be a nul
* terminated string. ssid_len defines how many characters are valid
* and the ssid field is not guaranteed to be nul terminated.
*/
u8 *ssid;
/**
* ssid_len - Length of the SSID
*/
size_t ssid_len;
/**
* bssid - BSSID
*
* If set, this network block is used only when associating with the AP
* using the configured BSSID
*
* If this is a persistent P2P group (disabled == 2), this is the GO
* Device Address.
*/
u8 bssid[ETH_ALEN];
/**
* bssid_blacklist - List of inacceptable BSSIDs
*/
u8 *bssid_blacklist;
size_t num_bssid_blacklist;
/**
* bssid_blacklist - List of acceptable BSSIDs
*/
u8 *bssid_whitelist;
size_t num_bssid_whitelist;
/**
* bssid_set - Whether BSSID is configured for this network
*/
int bssid_set;
/**
* bssid_hint - BSSID hint
*
* If set, this is configured to the driver as a preferred initial BSSID
* while connecting to this network.
*/
u8 bssid_hint[ETH_ALEN];
/**
* bssid_hint_set - Whether BSSID hint is configured for this network
*/
int bssid_hint_set;
/**
* go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set
*/
u8 go_p2p_dev_addr[ETH_ALEN];
/**
* psk - WPA pre-shared key (256 bits)
*/
u8 psk[32];
/**
* psk_set - Whether PSK field is configured
*/
int psk_set;
/**
* passphrase - WPA ASCII passphrase
*
* If this is set, psk will be generated using the SSID and passphrase
* configured for the network. ASCII passphrase must be between 8 and
* 63 characters (inclusive).
*/
char *passphrase;
/**
* sae_password - SAE password
*
* This parameter can be used to set a password for SAE. By default, the
* passphrase value is used if this separate parameter is not used, but
* passphrase follows the WPA-PSK constraints (8..63 characters) even
* though SAE passwords do not have such constraints.
*/
char *sae_password;
/**
* sae_password_id - SAE password identifier
*
* This parameter can be used to identify a specific SAE password. If
* not included, the default SAE password is used instead.
*/
char *sae_password_id;
/**
* ext_psk - PSK/passphrase name in external storage
*
* If this is set, PSK/passphrase will be fetched from external storage
* when requesting association with the network.
*/
char *ext_psk;
/**
* mem_only_psk - Whether to keep PSK/passphrase only in memory
*
* 0 = allow psk/passphrase to be stored to the configuration file
* 1 = do not store psk/passphrase to the configuration file
*/
int mem_only_psk;
/**
* pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
*/
int pairwise_cipher;
/**
* group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_*
*/
int group_cipher;
/**
* group_mgmt_cipher - Bitfield of allowed group management ciphers
*
* This is a bitfield of WPA_CIPHER_AES_128_CMAC and WPA_CIPHER_BIP_*
* values. If 0, no constraint is used for the cipher, i.e., whatever
* the AP uses is accepted.
*/
int group_mgmt_cipher;
/**
* key_mgmt - Bitfield of allowed key management protocols
*
* WPA_KEY_MGMT_*
*/
int key_mgmt;
/**
* bg_scan_period - Background scan period in seconds, 0 to disable, or
* -1 to indicate no change to default driver configuration
*/
int bg_scan_period;
/**
* proto - Bitfield of allowed protocols, WPA_PROTO_*
*/
int proto;
/**
* auth_alg - Bitfield of allowed authentication algorithms
*
* WPA_AUTH_ALG_*
*/
int auth_alg;
/**
* scan_ssid - Scan this SSID with Probe Requests
*
* scan_ssid can be used to scan for APs using hidden SSIDs.
* Note: Many drivers do not support this. ap_mode=2 can be used with
* such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
* do support scan_ssid=1 and that should be used with them instead of
* ap_scan=2.
*/
int scan_ssid;
#ifdef IEEE8021X_EAPOL
#define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0)
#define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1)
/**
* eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*)
*/
int eapol_flags;
/**
* eap - EAP peer configuration for this network
*/
struct eap_peer_config eap;
#endif /* IEEE8021X_EAPOL */
#define NUM_WEP_KEYS 4
#define MAX_WEP_KEY_LEN 16
/**
* wep_key - WEP keys
*/
u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN];
/**
* wep_key_len - WEP key lengths
*/
size_t wep_key_len[NUM_WEP_KEYS];
/**
* wep_tx_keyidx - Default key index for TX frames using WEP
*/
int wep_tx_keyidx;
/**
* proactive_key_caching - Enable proactive key caching
*
* This field can be used to enable proactive key caching which is also
* known as opportunistic PMKSA caching for WPA2. This is disabled (0)
* by default unless default value is changed with the global okc=1
* parameter. Enable by setting this to 1.
*
* Proactive key caching is used to make supplicant assume that the APs
* are using the same PMK and generate PMKSA cache entries without
* doing RSN pre-authentication. This requires support from the AP side
* and is normally used with wireless switches that co-locate the
* authenticator.
*
* Internally, special value -1 is used to indicate that the parameter
* was not specified in the configuration (i.e., default behavior is
* followed).
*/
int proactive_key_caching;
/**
* mixed_cell - Whether mixed cells are allowed
*
* This option can be used to configure whether so called mixed cells,
* i.e., networks that use both plaintext and encryption in the same
* SSID, are allowed. This is disabled (0) by default. Enable by
* setting this to 1.
*/
int mixed_cell;
#ifdef IEEE8021X_EAPOL
/**
* leap - Number of EAP methods using LEAP
*
* This field should be set to 1 if LEAP is enabled. This is used to
* select IEEE 802.11 authentication algorithm.
*/
int leap;
/**
* non_leap - Number of EAP methods not using LEAP
*
* This field should be set to >0 if any EAP method other than LEAP is
* enabled. This is used to select IEEE 802.11 authentication
* algorithm.
*/
int non_leap;
/**
* eap_workaround - EAP workarounds enabled
*
* wpa_supplicant supports number of "EAP workarounds" to work around
* interoperability issues with incorrectly behaving authentication
* servers. This is recommended to be enabled by default because some
* of the issues are present in large number of authentication servers.
*
* Strict EAP conformance mode can be configured by disabling
* workarounds with eap_workaround = 0.
*/
unsigned int eap_workaround;
#endif /* IEEE8021X_EAPOL */
/**
* mode - IEEE 802.11 operation mode (Infrastucture/IBSS)
*
* 0 = infrastructure (Managed) mode, i.e., associate with an AP.
*
* 1 = IBSS (ad-hoc, peer-to-peer)
*
* 2 = AP (access point)
*
* 3 = P2P Group Owner (can be set in the configuration file)
*
* 4 = P2P Group Formation (used internally; not in configuration
* files)
*
* 5 = Mesh
*
* Note: IBSS can only be used with key_mgmt NONE (plaintext and static
* WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
* (fixed group key TKIP/CCMP) is available for backwards compatibility,
* but its use is deprecated. WPA-None requires following network block
* options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or
* CCMP, but not both), and psk must also be set (either directly or
* using ASCII passphrase).
*/
enum wpas_mode {
WPAS_MODE_INFRA = 0,
WPAS_MODE_IBSS = 1,
WPAS_MODE_AP = 2,
WPAS_MODE_P2P_GO = 3,
WPAS_MODE_P2P_GROUP_FORMATION = 4,
WPAS_MODE_MESH = 5,
} mode;
/**
* pbss - Whether to use PBSS. Relevant to DMG networks only.
* 0 = do not use PBSS
* 1 = use PBSS
* 2 = don't care (not allowed in AP mode)
* Used together with mode configuration. When mode is AP, it
* means to start a PCP instead of a regular AP. When mode is INFRA it
* means connect to a PCP instead of AP. In this mode you can also
* specify 2 (don't care) meaning connect to either AP or PCP.
* P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
*/
int pbss;
/**
* disabled - Whether this network is currently disabled
*
* 0 = this network can be used (default).
* 1 = this network block is disabled (can be enabled through
* ctrl_iface, e.g., with wpa_cli or wpa_gui).
* 2 = this network block includes parameters for a persistent P2P
* group (can be used with P2P ctrl_iface commands)
*/
int disabled;
/**
* disabled_for_connect - Whether this network was temporarily disabled
*
* This flag is used to reenable all the temporarily disabled networks
* after either the success or failure of a WPS connection.
*/
int disabled_for_connect;
/**
* id_str - Network identifier string for external scripts
*
* This value is passed to external ctrl_iface monitors in
* WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR
* environment variable for action scripts.
*/
char *id_str;
#ifdef CONFIG_IEEE80211W
/**
* ieee80211w - Whether management frame protection is enabled
*
* This value is used to configure policy for management frame
* protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
* This is disabled by default unless the default value has been changed
* with the global pmf=1/2 parameter.
*
* Internally, special value 3 is used to indicate that the parameter
* was not specified in the configuration (i.e., default behavior is
* followed).
*/
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */
/**
* frequency - Channel frequency in megahertz (MHz) for IBSS
*
* This value is used to configure the initial channel for IBSS (adhoc)
* networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in
* the infrastructure mode. In addition, this value is only used by the
* station that creates the IBSS. If an IBSS network with the
* configured SSID is already present, the frequency of the network
* will be used instead of this configured value.
*/
int frequency;
/**
* fixed_freq - Use fixed frequency for IBSS
*/
int fixed_freq;
#ifdef CONFIG_ACS
/**
* ACS - Automatic Channel Selection for AP mode
*
* If present, it will be handled together with frequency.
* frequency will be used to determine hardware mode only, when it is
* used for both hardware mode and channel when used alone. This will
* force the channel to be set to 0, thus enabling ACS.
*/
int acs;
#endif /* CONFIG_ACS */
/**
* mesh_basic_rates - BSS Basic rate set for mesh network
*
*/
int *mesh_basic_rates;
/**
* Mesh network plink parameters
*/
int dot11MeshMaxRetries;
int dot11MeshRetryTimeout; /* msec */
int dot11MeshConfirmTimeout; /* msec */
int dot11MeshHoldingTimeout; /* msec */
int ht;
int ht40;
int vht;
int max_oper_chwidth;
unsigned int vht_center_freq1;
unsigned int vht_center_freq2;
/**
* wpa_ptk_rekey - Maximum lifetime for PTK in seconds
*
* This value can be used to enforce rekeying of PTK to mitigate some
* attacks against TKIP deficiencies.
*/
int wpa_ptk_rekey;
/**
* group_rekey - Group rekeying time in seconds
*
* This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime
* parameter when operating in Authenticator role in IBSS.
*/
int group_rekey;
/**
* scan_freq - Array of frequencies to scan or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
* megahertz (MHz) to include in scan requests when searching for this
* network. This can be used to speed up scanning when the network is
* known to not use all possible channels.
*/
int *scan_freq;
/**
* bgscan - Background scan and roaming parameters or %NULL if none
*
* This is an optional set of parameters for background scanning and
* roaming within a network (ESS) in following format:
* <bgscan module name>:<module parameters>
*/
char *bgscan;
/**
* ignore_broadcast_ssid - Hide SSID in AP mode
*
* Send empty SSID in beacons and ignore probe request frames that do
* not specify full SSID, i.e., require stations to know SSID.
* default: disabled (0)
* 1 = send empty (length=0) SSID in beacon and ignore probe request
* for broadcast SSID
* 2 = clear SSID (ASCII 0), but keep the original length (this may be
* required with some clients that do not support empty SSID) and
* ignore probe requests for broadcast SSID
*/
int ignore_broadcast_ssid;
/**
* freq_list - Array of allowed frequencies or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
* megahertz (MHz) to allow for selecting the BSS. If set, scan results
* that do not match any of the specified frequencies are not
* considered when selecting a BSS.
*/
int *freq_list;
/**
* p2p_client_list - List of P2P Clients in a persistent group (GO)
*
* This is a list of P2P Clients (P2P Device Address) that have joined
* the persistent group. This is maintained on the GO for persistent
* group entries (disabled == 2).
*/
u8 *p2p_client_list;
/**
* num_p2p_clients - Number of entries in p2p_client_list
*/
size_t num_p2p_clients;
#ifndef P2P_MAX_STORED_CLIENTS
#define P2P_MAX_STORED_CLIENTS 100
#endif /* P2P_MAX_STORED_CLIENTS */
/**
* psk_list - Per-client PSKs (struct psk_list_entry)
*/
struct dl_list psk_list;
/**
* p2p_group - Network generated as a P2P group (used internally)
*/
int p2p_group;
/**
* p2p_persistent_group - Whether this is a persistent group
*/
int p2p_persistent_group;
/**
* temporary - Whether this network is temporary and not to be saved
*/
int temporary;
/**
* export_keys - Whether keys may be exported
*
* This attribute will be set when keys are determined through
* WPS or similar so that they may be exported.
*/
int export_keys;
#ifdef CONFIG_HT_OVERRIDES
/**
* disable_ht - Disable HT (IEEE 802.11n) for this network
*
* By default, use it if it is available, but this can be configured
* to 1 to have it disabled.
*/
int disable_ht;
/**
* disable_ht40 - Disable HT40 for this network
*
* By default, use it if it is available, but this can be configured
* to 1 to have it disabled.
*/
int disable_ht40;
/**
* disable_sgi - Disable SGI (Short Guard Interval) for this network
*
* By default, use it if it is available, but this can be configured
* to 1 to have it disabled.
*/
int disable_sgi;
/**
* disable_ldpc - Disable LDPC for this network
*
* By default, use it if it is available, but this can be configured
* to 1 to have it disabled.
*/
int disable_ldpc;
/**
* ht40_intolerant - Indicate 40 MHz intolerant for this network
*/
int ht40_intolerant;
/**
* disable_max_amsdu - Disable MAX A-MSDU
*
* A-MDSU will be 3839 bytes when disabled, or 7935
* when enabled (assuming it is otherwise supported)
* -1 (default) means do not apply any settings to the kernel.
*/
int disable_max_amsdu;
/**
* ampdu_factor - Maximum A-MPDU Length Exponent
*
* Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
*/
int ampdu_factor;
/**
* ampdu_density - Minimum A-MPDU Start Spacing
*
* Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
*/
int ampdu_density;
/**
* ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000...
*
* By default (empty string): Use whatever the OS has configured.
*/
char *ht_mcs;
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
/**
* disable_vht - Disable VHT (IEEE 802.11ac) for this network
*
* By default, use it if it is available, but this can be configured
* to 1 to have it disabled.
*/
int disable_vht;
/**
* vht_capa - VHT capabilities to use
*/
unsigned int vht_capa;
/**
* vht_capa_mask - mask for VHT capabilities
*/
unsigned int vht_capa_mask;
int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2,
vht_rx_mcs_nss_3, vht_rx_mcs_nss_4,
vht_rx_mcs_nss_5, vht_rx_mcs_nss_6,
vht_rx_mcs_nss_7, vht_rx_mcs_nss_8;
int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2,
vht_tx_mcs_nss_3, vht_tx_mcs_nss_4,
vht_tx_mcs_nss_5, vht_tx_mcs_nss_6,
vht_tx_mcs_nss_7, vht_tx_mcs_nss_8;
#endif /* CONFIG_VHT_OVERRIDES */
/**
* ap_max_inactivity - Timeout in seconds to detect STA's inactivity
*
* This timeout value is used in AP mode to clean up inactive stations.
* By default: 300 seconds.
*/
int ap_max_inactivity;
/**
* dtim_period - DTIM period in Beacon intervals
* By default: 2
*/
int dtim_period;
/**
* beacon_int - Beacon interval (default: 100 TU)
*/
int beacon_int;
/**
* auth_failures - Number of consecutive authentication failures
*/
unsigned int auth_failures;
/**
* disabled_until - Network block disabled until this time if non-zero
*/
struct os_reltime disabled_until;
/**
* parent_cred - Pointer to parent wpa_cred entry
*
* This pointer can be used to delete temporary networks when a wpa_cred
* that was used to create them is removed. This pointer should not be
* dereferences since it may not be updated in all cases.
*/
void *parent_cred;
#ifdef CONFIG_MACSEC
/**
* macsec_policy - Determines the policy for MACsec secure session
*
* 0: MACsec not in use (default)
* 1: MACsec enabled - Should secure, accept key server's advice to
* determine whether to use a secure session or not.
*/
int macsec_policy;
/**
* macsec_integ_only - Determines how MACsec are transmitted
*
* This setting applies only when MACsec is in use, i.e.,
* - macsec_policy is enabled
* - the key server has decided to enable MACsec
*
* 0: Encrypt traffic (default)
* 1: Integrity only
*/
int macsec_integ_only;
/**
* macsec_port - MACsec port (in SCI)
*
* Port component of the SCI.
*
* Range: 1-65534 (default: 1)
*/
int macsec_port;
/**
* mka_priority - Priority of MKA Actor
*
* Range: 0-255 (default: 255)
*/
int mka_priority;
/**
* mka_ckn - MKA pre-shared CKN
*/
#define MACSEC_CKN_LEN 32
u8 mka_ckn[MACSEC_CKN_LEN];
/**
* mka_cak - MKA pre-shared CAK
*/
#define MACSEC_CAK_LEN 16
u8 mka_cak[MACSEC_CAK_LEN];
#define MKA_PSK_SET_CKN BIT(0)
#define MKA_PSK_SET_CAK BIT(1)
#define MKA_PSK_SET (MKA_PSK_SET_CKN | MKA_PSK_SET_CAK)
/**
* mka_psk_set - Whether mka_ckn and mka_cak are set
*/
u8 mka_psk_set;
#endif /* CONFIG_MACSEC */
#ifdef CONFIG_HS20
int update_identifier;
/**
* roaming_consortium_selection - Roaming Consortium Selection
*
* The matching Roaming Consortium OI that was used to generate this
* network profile.
*/
u8 *roaming_consortium_selection;
/**
* roaming_consortium_selection_len - roaming_consortium_selection len
*/
size_t roaming_consortium_selection_len;
#endif /* CONFIG_HS20 */
unsigned int wps_run;
/**
* mac_addr - MAC address policy
*
* 0 = use permanent MAC address
* 1 = use random MAC address for each ESS connection
* 2 = like 1, but maintain OUI (with local admin bit set)
*
* Internally, special value -1 is used to indicate that the parameter
* was not specified in the configuration (i.e., default behavior is
* followed).
*/
int mac_addr;
/**
* no_auto_peer - Do not automatically peer with compatible mesh peers
*
* When unset, the reception of a beacon from a another mesh peer in
* this MBSS will trigger a peering attempt.
*/
int no_auto_peer;
/**
* mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
*
* -255..-1 = threshold value in dBm
* 0 = not using RSSI threshold
* 1 = do not change driver default
*/
int mesh_rssi_threshold;
/**
* wps_disabled - WPS disabled in AP mode
*
* 0 = WPS enabled and configured (default)
* 1 = WPS disabled
*/
int wps_disabled;
/**
* fils_dh_group - FILS DH Group
*
* 0 = PFS disabled with FILS shared key authentication
* 1-65535 DH Group to use for FILS PFS
*/
int fils_dh_group;
/**
* dpp_connector - DPP Connector (signedConnector as string)
*/
char *dpp_connector;
/**
* dpp_netaccesskey - DPP netAccessKey (own private key)
*/
u8 *dpp_netaccesskey;
/**
* dpp_netaccesskey_len - DPP netAccessKey length in octets
*/
size_t dpp_netaccesskey_len;
/**
* net_access_key_expiry - DPP netAccessKey expiry in UNIX time stamp
*
* 0 indicates no expiration.
*/
unsigned int dpp_netaccesskey_expiry;
/**
* dpp_csign - C-sign-key (Configurator public key)
*/
u8 *dpp_csign;
/**
* dpp_csign_len - C-sign-key length in octets
*/
size_t dpp_csign_len;
/**
* owe_group - OWE DH Group
*
* 0 = use default (19) first and then try all supported groups one by
* one if AP rejects the selected group
* 1-65535 DH Group to use for OWE
*
* Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
* currently supported.
*/
int owe_group;
/**
* owe_only - OWE-only mode (disable transition mode)
*
* 0 = enable transition mode (allow connection to either OWE or open
* BSS)
* 1 = disable transition mode (allow connection only with OWE)
*/
int owe_only;
/**
* owe_transition_bss_select_count - OWE transition BSS select count
*
* This is an internally used variable (i.e., not used in external
* configuration) to track the number of selection attempts done for
* OWE BSS in transition mode. This allows fallback to an open BSS if
* the selection attempts for OWE BSS exceed the configured threshold.
*/
int owe_transition_bss_select_count;
};
#endif /* CONFIG_SSID_H */