jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/hostapd/ChangeLog
Jouni Malinen 2100a768bf Fixed WPA/RSN IE validation to verify the proto (WPA vs. WPA2) is enabled 
Previous version could have allowed a broken client to complete WPA (or
WPA2) authentication even if the selected proto was not enabled in hostapd
configuration.
2008-10-15 06:34:39 +03:00

511 lines
26 KiB
Text
Raw Blame History

ChangeLog for hostapd
????-??-?? - v0.6.5
* added support for SHA-256 as X.509 certificate digest when using the
internal X.509/TLSv1 implementation
* fixed EAP-FAST PAC-Opaque padding (0.6.4 broke this for some peer
identity lengths)
* fixed internal TLSv1 implementation for abbreviated handshake (used
by EAP-FAST server)
* added support for setting VLAN ID for STAs based on local MAC ACL
(accept_mac_file) as an alternative for RADIUS server-based
configuration
* updated management frame protection to use IEEE 802.11w/D6.0
(adds a new association ping to protect against unauthenticated
authenticate or (re)associate request frames dropping association)
* added support for using SHA256-based stronger key derivation for WPA2
(IEEE 802.11w)
* added new "driver wrapper" for RADIUS-only configuration
(driver=none in hostapd.conf; CONFIG_DRIVER_NONE=y in .config)
* fixed WPA/RSN IE validation to verify that the proto (WPA vs. WPA2)
is enabled in configuration
2008-08-10 - v0.6.4
* added peer identity into EAP-FAST PAC-Opaque and skip Phase 2
Identity Request if identity is already known
* added support for EAP Sequences in EAP-FAST Phase 2
* added support for EAP-TNC (Trusted Network Connect)
(this version implements the EAP-TNC method and EAP-TTLS/EAP-FAST
changes needed to run two methods in sequence (IF-T) and the IF-IMV
and IF-TNCCS interfaces from TNCS)
* added support for optional cryptobinding with PEAPv0
* added fragmentation support for EAP-TNC
* added support for fragmenting EAP-TTLS/PEAP/FAST Phase 2 (tunneled)
data
* added support for opportunistic key caching (OKC)
2008-02-22 - v0.6.3
* fixed Reassociation Response callback processing when using internal
MLME (driver_{hostap,nl80211,test}.c)
* updated FT support to use the latest draft, IEEE 802.11r/D9.0
* copy optional Proxy-State attributes into RADIUS response when acting
as a RADIUS authentication server
* fixed EAPOL state machine to handle a case in which no response is
received from the RADIUS authentication server; previous version
could have triggered a crash in some cases after a timeout
* fixed EAP-SIM/AKA realm processing to allow decorated usernames to
be used
* added a workaround for EAP-SIM/AKA peers that include incorrect null
termination in the username
* fixed EAP-SIM/AKA protected result indication to include AT_COUNTER
attribute in notification messages only when using fast
reauthentication
* fixed EAP-SIM Start response processing for fast reauthentication
case
* added support for pending EAP processing in EAP-{PEAP,TTLS,FAST}
phase 2 to allow EAP-SIM and EAP-AKA to be used as the Phase 2 method
2008-01-01 - v0.6.2
* fixed EAP-SIM and EAP-AKA message parser to validate attribute
lengths properly to avoid potential crash caused by invalid messages
* added data structure for storing allocated buffers (struct wpabuf);
this does not affect hostapd usage, but many of the APIs changed
and various interfaces (e.g., EAP) is not compatible with old
versions
* added support for protecting EAP-AKA/Identity messages with
AT_CHECKCODE (optional feature in RFC 4187)
* added support for protected result indication with AT_RESULT_IND for
EAP-SIM and EAP-AKA (eap_sim_aka_result_ind=1)
* added support for configuring EAP-TTLS phase 2 non-EAP methods in
EAP server configuration; previously all four were enabled for every
phase 2 user, now all four are disabled by default and need to be
enabled with new method names TTLS-PAP, TTLS-CHAP, TTLS-MSCHAP,
TTLS-MSCHAPV2
* removed old debug printing mechanism and the related 'debug'
parameter in the configuration file; debug verbosity is now set with
-d (or -dd) command line arguments
* added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt);
only shared key/password authentication is supported in this version
2007-11-24 - v0.6.1
* added experimental, integrated TLSv1 server implementation with the
needed X.509/ASN.1/RSA/bignum processing (this can be enabled by
setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in
.config); this can be useful, e.g., if the target system does not
have a suitable TLS library and a minimal code size is required
* added support for EAP-FAST server method to the integrated EAP
server
* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
draft (draft-ietf-emu-eap-gpsk-07.txt)
* added a new configuration parameter, rsn_pairwise, to allow different
pairwise cipher suites to be enabled for WPA and RSN/WPA2
(note: if wpa_pairwise differs from rsn_pairwise, the driver will
either need to support this or will have to use the WPA/RSN IEs from
hostapd; currently, the included madwifi and bsd driver interfaces do
not have support for this)
* updated FT support to use the latest draft, IEEE 802.11r/D8.0
2007-05-28 - v0.6.0
* added experimental IEEE 802.11r/D6.0 support
* updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48
* updated EAP-PSK to use the IANA-allocated EAP type 47
* fixed EAP-PSK bit ordering of the Flags field
* fixed configuration reloading (SIGHUP) to re-initialize WPA PSKs
by reading wpa_psk_file [Bug 181]
* fixed EAP-TTLS AVP parser processing for too short AVP lengths
* fixed IPv6 connection to RADIUS accounting server
* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
draft (draft-ietf-emu-eap-gpsk-04.txt)
* hlr_auc_gw: read GSM triplet file into memory and rotate through the
entries instead of only using the same three triplets every time
(this does not work properly with tests using multiple clients, but
provides bit better triplet data for testing a single client; anyway,
if a better quality triplets are needed, GSM-Milenage should be used
instead of hardcoded triplet file)
* fixed EAP-MSCHAPv2 server to use a space between S and M parameters
in Success Request [Bug 203]
* added support for sending EAP-AKA Notifications in error cases
* updated to use IEEE 802.11w/D2.0 for management frame protection
(still experimental)
* RADIUS server: added support for processing duplicate messages
(retransmissions from RADIUS client) by replying with the previous
reply
2006-11-24 - v0.5.6
* added support for configuring and controlling multiple BSSes per
radio interface (bss=<ifname> in hostapd.conf); this is only
available with Devicescape and test driver interfaces
* fixed PMKSA cache update in the end of successful RSN
pre-authentication
* added support for dynamic VLAN configuration (i.e., selecting VLAN-ID
for each STA based on RADIUS Access-Accept attributes); this requires
VLAN support from the kernel driver/802.11 stack and this is
currently only available with Devicescape and test driver interfaces
* driver_madwifi: fixed configuration of unencrypted modes (plaintext
and IEEE 802.1X without WEP)
* removed STAKey handshake since PeerKey handshake has replaced it in
IEEE 802.11ma and there are no known deployments of STAKey
* updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
draft (draft-ietf-emu-eap-gpsk-01.txt)
* added preliminary implementation of IEEE 802.11w/D1.0 (management
frame protection)
(Note: this requires driver support to work properly.)
(Note2: IEEE 802.11w is an unapproved draft and subject to change.)
* hlr_auc_gw: added support for GSM-Milenage (for EAP-SIM)
* hlr_auc_gw: added support for reading per-IMSI Milenage keys and
parameters from a text file to make it possible to implement proper
GSM/UMTS authentication server for multiple SIM/USIM cards using
EAP-SIM/EAP-AKA
* fixed session timeout processing with drivers that do not use
ieee802_11.c (e.g., madwifi)
2006-08-27 - v0.5.5
* added 'hostapd_cli new_sta <addr>' command for adding a new STA into
hostapd (e.g., to initialize wired network authentication based on an
external signal)
* fixed hostapd to add PMKID KDE into 4-Way Handshake Message 1 when
using WPA2 even if PMKSA caching is not used
* added -P<pid file> argument for hostapd to write the current process
id into a file
* added support for RADIUS Authentication Server MIB (RFC 2619)
2006-06-20 - v0.5.4
* fixed nt_password_hash build [Bug 144]
* added PeerKey handshake implementation for IEEE 802.11e
direct link setup (DLS) to replace STAKey handshake
* added support for EAP Generalized Pre-Shared Key (EAP-GPSK,
draft-clancy-emu-eap-shared-secret-00.txt)
* fixed a segmentation fault when RSN pre-authentication was completed
successfully [Bug 152]
2006-04-27 - v0.5.3
* do not build nt_password_hash and hlr_auc_gw by default to avoid
requiring a TLS library for a successful build; these programs can be
build with 'make nt_password_hash' and 'make hlr_auc_gw'
* added a new configuration option, eapol_version, that can be used to
set EAPOL version to 1 (default is 2) to work around broken client
implementations that drop EAPOL frames which use version number 2
[Bug 89]
* added support for EAP-SAKE (no EAP method number allocated yet, so
this is using the same experimental type 255 as EAP-PSK)
* fixed EAP-MSCHAPv2 message length validation
2006-03-19 - v0.5.2
* fixed stdarg use in hostapd_logger(): if both stdout and syslog
logging was enabled, hostapd could trigger a segmentation fault in
vsyslog on some CPU -- C library combinations
* moved HLR/AuC gateway implementation for EAP-SIM/AKA into an external
program to make it easier to use for implementing real SS7 gateway;
eap_sim_db is not anymore used as a file name for GSM authentication
triplets; instead, it is path to UNIX domain socket that will be used
to communicate with the external gateway program (e.g., hlr_auc_gw)
* added example HLR/AuC gateway implementation, hlr_auc_gw, that uses
local information (GSM authentication triplets from a text file and
hardcoded AKA authentication data); this can be used to test EAP-SIM
and EAP-AKA
* added Milenage algorithm (example 3GPP AKA algorithm) to hlr_auc_gw
to make it possible to test EAP-AKA with real USIM cards (this is
disabled by default; define AKA_USE_MILENAGE when building hlr_auc_gw
to enable this)
* driver_madwifi: added support for getting station RSN IE from
madwifi-ng svn r1453 and newer; this fixes RSN that was apparently
broken with earlier change (r1357) in the driver
* changed EAP method registration to use a dynamic list of methods
instead of a static list generated at build time
* fixed WPA message 3/4 not to encrypt Key Data field (WPA IE)
[Bug 125]
* added ap_max_inactivity configuration parameter
2006-01-29 - v0.5.1
* driver_test: added better support for multiple APs and STAs by using
a directory with sockets that include MAC address for each device in
the name (test_socket=DIR:/tmp/test)
* added support for EAP expanded type (vendor specific EAP methods)
2005-12-18 - v0.5.0 (beginning of 0.5.x development releases)
* added experimental STAKey handshake implementation for IEEE 802.11e
direct link setup (DLS); note: this is disabled by default in both
build and runtime configuration (can be enabled with CONFIG_STAKEY=y
and stakey=1)
* added support for EAP methods to use callbacks to external programs
by buffering a pending request and processing it after the EAP method
is ready to continue
* improved EAP-SIM database interface to allow external request to GSM
HLR/AuC without blocking hostapd process
* added support for using EAP-SIM pseudonyms and fast re-authentication
* added support for EAP-AKA in the integrated EAP authenticator
* added support for matching EAP identity prefixes (e.g., "1"*) in EAP
user database to allow EAP-SIM/AKA selection without extra roundtrip
for EAP-Nak negotiation
* added support for storing EAP user password as NtPasswordHash instead
of plaintext password when using MSCHAP or MSCHAPv2 for
authentication (hash:<16-octet hex value>); added nt_password_hash
tool for hashing password to generate NtPasswordHash
2005-11-20 - v0.4.7 (beginning of 0.4.x stable releases)
* driver_wired: fixed EAPOL sending to optionally use PAE group address
as the destination instead of supplicant MAC address; this is
disabled by default, but should be enabled with use_pae_group_addr=1
in configuration file if the wired interface is used by only one
device at the time (common switch configuration)
* driver_madwifi: configure driver to use TKIP countermeasures in order
to get correct behavior (IEEE 802.11 association failing; previously,
association succeeded, but hostpad forced disassociation immediately)
* driver_madwifi: added support for madwifi-ng
2005-10-27 - v0.4.6
* added support for replacing user identity from EAP with RADIUS
User-Name attribute from Access-Accept message, if that is included,
for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get
tunneled identity into accounting messages when the RADIUS server
does not support better way of doing this with Class attribute)
* driver_madwifi: fixed EAPOL packet receive for configuration where
ath# is part of a bridge interface
* added a configuration file and log analyzer script for logwatch
* fixed EAPOL state machine step function to process all state
transitions before processing new events; this resolves a race
condition in which EAPOL-Start message could trigger hostapd to send
two EAP-Response/Identity frames to the authentication server
2005-09-25 - v0.4.5
* added client CA list to the TLS certificate request in order to make
it easier for the client to select which certificate to use
* added experimental support for EAP-PSK
* added support for WE-19 (hostap, madwifi)
2005-08-21 - v0.4.4
* fixed build without CONFIG_RSN_PREAUTH
* fixed FreeBSD build
2005-06-26 - v0.4.3
* fixed PMKSA caching to copy User-Name and Class attributes so that
RADIUS accounting gets correct information
* start RADIUS accounting only after successful completion of WPA
4-Way Handshake if WPA-PSK is used
* fixed PMKSA caching for the case where STA (re)associates without
first disassociating
2005-06-12 - v0.4.2
* EAP-PAX is now registered as EAP type 46
* fixed EAP-PAX MAC calculation
* fixed EAP-PAX CK and ICK key derivation
* renamed eap_authenticator configuration variable to eap_server to
better match with RFC 3748 (EAP) terminology
* driver_test: added support for testing hostapd with wpa_supplicant
by using test driver interface without any kernel drivers or network
cards
2005-05-22 - v0.4.1
* fixed RADIUS server initialization when only auth or acct server
is configured and the other one is left empty
* driver_madwifi: added support for RADIUS accounting
* driver_madwifi: added preliminary support for compiling against 'BSD'
branch of madwifi CVS tree
* driver_madwifi: fixed pairwise key removal to allow WPA reauth
without disassociation
* added support for reading additional certificates from PKCS#12 files
and adding them to the certificate chain
* fixed RADIUS Class attribute processing to only use Access-Accept
packets to update Class; previously, other RADIUS authentication
packets could have cleared Class attribute
* added support for more than one Class attribute in RADIUS packets
* added support for verifying certificate revocation list (CRL) when
using integrated EAP authenticator for EAP-TLS; new hostapd.conf
options 'check_crl'; CRL must be included in the ca_cert file for now
2005-04-25 - v0.4.0 (beginning of 0.4.x development releases)
* added support for including network information into
EAP-Request/Identity message (ASCII-0 (nul) in eap_message)
(e.g., to implement draft-adrange-eap-network-discovery-07.txt)
* fixed a bug which caused some RSN pre-authentication cases to use
freed memory and potentially crash hostapd
* fixed private key loading for cases where passphrase is not set
* added support for sending TLS alerts and aborting authentication
when receiving a TLS alert
* fixed WPA2 to add PMKSA cache entry when using integrated EAP
authenticator
* fixed PMKSA caching (EAP authentication was not skipped correctly
with the new state machine changes from IEEE 802.1X draft)
* added support for RADIUS over IPv6; own_ip_addr, auth_server_addr,
and acct_server_addr can now be IPv6 addresses (CONFIG_IPV6=y needs
to be added to .config to include IPv6 support); for RADIUS server,
radius_server_ipv6=1 needs to be set in hostapd.conf and addresses
in RADIUS clients file can then use IPv6 format
* added experimental support for EAP-PAX
* replaced hostapd control interface library (hostapd_ctrl.[ch]) with
the same implementation that wpa_supplicant is using (wpa_ctrl.[ch])
2005-02-12 - v0.3.7 (beginning of 0.3.x stable releases)
2005-01-23 - v0.3.5
* added support for configuring a forced PEAP version based on the
Phase 1 identity
* fixed PEAPv1 to use tunneled EAP-Success/Failure instead of EAP-TLV
to terminate authentication
* fixed EAP identifier duplicate processing with the new IEEE 802.1X
draft
* clear accounting data in the driver when starting a new accounting
session
* driver_madwifi: filter wireless events based on ifindex to allow more
than one network interface to be used
* fixed WPA message 2/4 processing not to cancel timeout for TimeoutEvt
setting if the packet does not pass MIC verification (e.g., due to
incorrect PSK); previously, message 1/4 was not tried again if an
invalid message 2/4 was received
* fixed reconfiguration of RADIUS client retransmission timer when
adding a new message to the pending list; previously, timer was not
updated at this point and if there was a pending message with long
time for the next retry, the new message needed to wait that long for
its first retry, too
2005-01-09 - v0.3.4
* added support for configuring multiple allowed EAP types for Phase 2
authentication (EAP-PEAP, EAP-TTLS)
* fixed EAPOL-Start processing to trigger WPA reauthentication
(previously, only EAPOL authentication was done)
2005-01-02 - v0.3.3
* added support for EAP-PEAP in the integrated EAP authenticator
* added support for EAP-GTC in the integrated EAP authenticator
* added support for configuring list of EAP methods for Phase 1 so that
the integrated EAP authenticator can, e.g., use the wildcard entry
for EAP-TLS and EAP-PEAP
* added support for EAP-TTLS in the integrated EAP authenticator
* added support for EAP-SIM in the integrated EAP authenticator
* added support for using hostapd as a RADIUS authentication server
with the integrated EAP authenticator taking care of EAP
authentication (new hostapd.conf options: radius_server_clients and
radius_server_auth_port); this is not included in default build; use
CONFIG_RADIUS_SERVER=y in .config to include
2004-12-19 - v0.3.2
* removed 'daemonize' configuration file option since it has not really
been used at all for more than year
* driver_madwifi: fixed group key setup and added get_ssid method
* added support for EAP-MSCHAPv2 in the integrated EAP authenticator
2004-12-12 - v0.3.1
* added support for integrated EAP-TLS authentication (new hostapd.conf
variables: ca_cert, server_cert, private_key, private_key_passwd);
this enabled dynamic keying (WPA2/WPA/IEEE 802.1X/WEP) without
external RADIUS server
* added support for reading PKCS#12 (PFX) files (as a replacement for
PEM/DER) to get certificate and private key (CONFIG_PKCS12)
2004-12-05 - v0.3.0 (beginning of 0.3.x development releases)
* added support for Acct-{Input,Output}-Gigawords
* added support for Event-Timestamp (in RADIUS Accounting-Requests)
* added support for RADIUS Authentication Client MIB (RFC2618)
* added support for RADIUS Accounting Client MIB (RFC2620)
* made EAP re-authentication period configurable (eap_reauth_period)
* fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication
* fixed EAPOL state machine to stop if STA is removed during
eapol_sm_step(); this fixes at least one segfault triggering bug with
IEEE 802.11i pre-authentication
* added support for multiple WPA pre-shared keys (e.g., one for each
client MAC address or keys shared by a group of clients);
new hostapd.conf field wpa_psk_file for setting path to a text file
containing PSKs, see hostapd.wpa_psk for an example
* added support for multiple driver interfaces to allow hostapd to be
used with other drivers
* added wired authenticator driver interface (driver=wired in
hostapd.conf, see wired.conf for example configuration)
* added madwifi driver interface (driver=madwifi in hostapd.conf, see
madwifi.conf for example configuration; Note: include files from
madwifi project is needed for building and a configuration file,
.config, needs to be created in hostapd directory with
CONFIG_DRIVER_MADWIFI=y to include this driver interface in hostapd
build)
* fixed an alignment issue that could cause SHA-1 to fail on some
platforms (e.g., Intel ixp425 with a compiler that does not 32-bit
align variables)
* fixed RADIUS reconnection after an error in sending interim
accounting packets
* added hostapd control interface for external programs and an example
CLI, hostapd_cli (like wpa_cli for wpa_supplicant)
* started adding dot11, dot1x, radius MIBs ('hostapd_cli mib',
'hostapd_cli sta <addr>')
* finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV (now d11)
* added support for strict GTK rekeying (wpa_strict_rekey in
hostapd.conf)
* updated IAPP to use UDP port 3517 and multicast address 224.0.1.178
(instead of broadcast) for IAPP ADD-notify (moved from draft 3 to
IEEE 802.11F-2003)
* added Prism54 driver interface (driver=prism54 in hostapd.conf;
note: .config needs to be created in hostapd directory with
CONFIG_DRIVER_PRISM54=y to include this driver interface in hostapd
build)
* dual-licensed hostapd (GPLv2 and BSD licenses)
* fixed RADIUS accounting to generate a new session id for cases where
a station reassociates without first being complete deauthenticated
* fixed STA disassociation handler to mark next timeout state to
deauthenticate the station, i.e., skip long wait for inactivity poll
and extra disassociation, if the STA disassociates without
deauthenticating
* added integrated EAP authenticator that can be used instead of
external RADIUS authentication server; currently, only EAP-MD5 is
supported, so this cannot yet be used for key distribution; the EAP
method interface is generic, though, so adding new EAP methods should
be straightforward; new hostapd.conf variables: 'eap_authenticator'
and 'eap_user_file'; this obsoletes "minimal authentication server"
('minimal_eap' in hostapd.conf) which is now removed
* added support for FreeBSD and driver interface for the BSD net80211
layer (driver=bsd in hostapd.conf and CONFIG_DRIVER_BSD=y in
.config); please note that some of the required kernel mods have not
yet been committed
2004-07-17 - v0.2.4 (beginning of 0.2.x stable releases)
* fixed some accounting cases where Accounting-Start was sent when
IEEE 802.1X port was being deauthorized
2004-06-20 - v0.2.3
* modified RADIUS client to re-connect the socket in case of certain
error codes that are generated when a network interface state is
changes (e.g., when IP address changes or the interface is set UP)
* fixed couple of cases where EAPOL state for a station was freed
twice causing a segfault for hostapd
* fixed couple of bugs in processing WPA deauthentication (freed data
was used)
2004-05-31 - v0.2.2
* fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM)
* fixed group rekeying to send zero TSC in EAPOL-Key messages to fix
cases where STAs dropped multicast frames as replay attacks
* added support for copying RADIUS Attribute 'Class' from
authentication messages into accounting messages
* send canned EAP failure if RADIUS server sends Access-Reject without
EAP message (previously, Supplicant was not notified in this case)
* fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK (i.e., do
not start EAPOL state machines if the STA selected to use WPA-PSK)
2004-05-06 - v0.2.1
* added WPA and IEEE 802.11i/RSN (WPA2) Authenticator functionality
- based on IEEE 802.11i/D10.0 but modified to interoperate with WPA
(i.e., IEEE 802.11i/D3.0)
- supports WPA-only, RSN-only, and mixed WPA/RSN mode
- both WPA-PSK and WPA-RADIUS/EAP are supported
- PMKSA caching and pre-authentication
- new hostapd.conf variables: wpa, wpa_psk, wpa_passphrase,
wpa_key_mgmt, wpa_pairwise, wpa_group_rekey, wpa_gmk_rekey,
rsn_preauth, rsn_preauth_interfaces
* fixed interim accounting to remove any pending accounting messages
to the STA before sending a new one
2004-02-15 - v0.2.0
* added support for Acct-Interim-Interval:
- draft-ietf-radius-acct-interim-01.txt
- use Acct-Interim-Interval attribute from Access-Accept if local
'radius_acct_interim_interval' is not set
- allow different update intervals for each STA
* fixed event loop to call signal handlers only after returning from
the real signal handler
* reset sta->timeout_next after successful association to make sure
that the previously registered inactivity timer will not remove the
STA immediately (e.g., if STA deauthenticates and re-associates
before the timer is triggered).
* added new hostapd.conf variable, nas_identifier, that can be used to
add an optional RADIUS Attribute, NAS-Identifier, into authentication
and accounting messages
* added support for Accounting-On and Accounting-Off messages
* fixed accounting session handling to send Accounting-Start only once
per session and not to send Accounting-Stop if the session was not
initialized properly
* fixed Accounting-Stop statistics in cases where the message was
previously sent after the kernel entry for the STA (and/or IEEE
802.1X data) was removed
Note:
Older changes up to and including v0.1.0 are included in the ChangeLog
of the Host AP driver.
Reference in a new issue View git blame Copy permalink