hostap/tests/hwsim/start.sh
Jouni Malinen b0839232fa tests: Enable wpa_supplicant D-Bus support for hwsim tests
This allows automated testing of the wpa_supplicant D-Bus interface. The
instance controlling wlan0 registers with D-Bus if dbus-daemon was
started successfully. This is only used in VM testing, i.e., not when
run-tests.sh is used on the host system with D-Bus running for normal
system purposes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00

180 lines
4.8 KiB
Bash
Executable file

#!/bin/sh
DIR="$( cd "$( dirname "$0" )" && pwd )"
WPAS=$DIR/../../wpa_supplicant/wpa_supplicant
WPACLI=$DIR/../../wpa_supplicant/wpa_cli
HAPD=$DIR/../../hostapd/hostapd
HAPD_AS=$DIR/../../hostapd/hostapd
HAPDCLI=$DIR/../../hostapd/hostapd_cli
WLANTEST=$DIR/../../wlantest/wlantest
HLR_AUC_GW=$DIR/../../hostapd/hlr_auc_gw
DATE="$(date +%s)"
if [ -z "$LOGDIR" ] ; then
LOGDIR="$DIR/logs/$DATE"
mkdir -p $LOGDIR
else
if [ -e $LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant ]; then
WPAS=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant
WPACLI=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_cli
# extra code coverage
$WPAS > /dev/null 2>&1
$WPAS -efoo -Ifoo -mfoo -ofoo -Ofoo -pfoo -Pfoo -h > /dev/null 2>&1
$WPAS -bfoo -B -Cfoo -q -W -N -L > /dev/null 2>&1
$WPAS -T -v > /dev/null 2>&1
$WPAS -u -z > /dev/null 2>&1
fi
if [ -e $LOGDIR/alt-hostapd/hostapd/hostapd ]; then
HAPD=$LOGDIR/alt-hostapd/hostapd/hostapd
HAPDCLI=$LOGDIR/alt-hostapd/hostapd/hostapd_cli
# extra code coverage
$HAPD > /dev/null 2>&1
$HAPD -v > /dev/null 2>&1
$HAPD -B -efoo -Pfoo -T -bfoo -h > /dev/null 2>&1
$HAPD -ufoo > /dev/null 2>&1
$HAPD -u00:11:22:33:44:55 > /dev/null 2>&1
$HAPD -gfoo > /dev/null 2>&1
$HAPD -Gfoo-not-exists > /dev/null 2>&1
$HAPD -z > /dev/null 2>&1
fi
if [ -e $LOGDIR/alt-hostapd-as/hostapd/hostapd ]; then
HAPD_AS=$LOGDIR/alt-hostapd-as/hostapd/hostapd
fi
if [ -e $LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw ]; then
HLR_AUC_GW=$LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw
# extra code coverage
$HLR_AUC_GW > /dev/null 2>&1
$HLR_AUC_GW -Dfoo -i7 -sfoo -h > /dev/null 2>&1
$HLR_AUC_GW -i100 > /dev/null 2>&1
$HLR_AUC_GW -z > /dev/null 2>&1
fi
fi
if test -w "$DIR/logs" ; then
rm -rf $DIR/logs/current
ln -sf $DATE $DIR/logs/current
fi
if groups | tr ' ' "\n" | grep -q ^admin$; then
GROUP=admin
else
GROUP=adm
fi
for i in 0 1 2; do
sed "s/ GROUP=.*$/ GROUP=$GROUP/" "$DIR/p2p$i.conf" > "$LOGDIR/p2p$i.conf"
done
sed "s/group=admin/group=$GROUP/" "$DIR/auth_serv/as.conf" > "$LOGDIR/as.conf"
sed "s/group=admin/group=$GROUP/;s%LOGDIR%$LOGDIR%" "$DIR/auth_serv/as2.conf" > "$LOGDIR/as2.conf"
if [ "$1" = "valgrind" ]; then
VALGRIND=y
VALGRIND_WPAS="valgrind --log-file=$LOGDIR/valgrind-wlan%d"
VALGRIND_HAPD="valgrind --log-file=$LOGDIR/valgrind-hostapd"
chmod -f a+rx $WPAS
chmod -f a+rx $HAPD
chmod -f a+rx $HAPD_AS
HAPD_AS="valgrind --log-file=$LOGDIR/valgrind-auth-serv $HAPD_AS"
shift
else
unset VALGRIND
VALGRIND_WPAS=
VALGRIND_HAPD=
fi
if [ "$1" = "trace" ]; then
TRACE="T"
shift
else
TRACE=""
fi
$DIR/stop.sh
TMP=$1
if [ x${TMP%=[0-9]*} = "xchannels" ]; then
NUM_CH=${TMP#channels=}
shift
else
NUM_CH=1
fi
test -f /proc/modules && sudo modprobe mac80211_hwsim radios=6 channels=$NUM_CH support_p2p_device=0
sudo ifconfig hwsim0 up
sudo $WLANTEST -i hwsim0 -n $LOGDIR/hwsim0.pcapng -c -dt -L $LOGDIR/hwsim0 &
for i in 0 1 2; do
DBUSARG=""
if [ $i = "0" -a -r /var/run/dbus/pid -a -r /var/run/dbus/hwsim-test ]; then
if $WPAS | grep -q -- -u; then
DBUSARG="-u"
fi
fi
sudo $(printf -- "$VALGRIND_WPAS" $i) $WPAS -g /tmp/wpas-wlan$i -G$GROUP -Dnl80211 -iwlan$i -c $LOGDIR/p2p$i.conf \
-ddKt$TRACE -f $LOGDIR/log$i $DBUSARG &
done
sudo $(printf -- "$VALGRIND_WPAS" 5) $WPAS -g /tmp/wpas-wlan5 -G$GROUP \
-ddKt$TRACE -f $LOGDIR/log5 &
sudo $VALGRIND_HAPD $HAPD -ddKt$TRACE -g /var/run/hostapd-global -G $GROUP -ddKt -f $LOGDIR/hostapd &
if [ -x $HLR_AUC_GW ]; then
cp $DIR/auth_serv/hlr_auc_gw.milenage_db $LOGDIR/hlr_auc_gw.milenage_db
sudo $HLR_AUC_GW -u -m $LOGDIR/hlr_auc_gw.milenage_db -g $DIR/auth_serv/hlr_auc_gw.gsm > $LOGDIR/hlr_auc_gw &
fi
touch $LOGDIR/hostapd.db
sudo $HAPD_AS -ddKt $LOGDIR/as.conf $LOGDIR/as2.conf > $LOGDIR/auth_serv &
# wait for programs to be fully initialized
for i in 0 1 2 3 4 5 6 7 8 9; do
if [ -e /tmp/wpas-wlan0 ]; then
break
fi
sleep 0.05
done
for i in 0 1 2; do
for j in `seq 1 10`; do
if $WPACLI -g /tmp/wpas-wlan$i ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to /tmp/wpas-wlan$i"
exit 1
fi
sleep 1
done
done
for j in `seq 1 10`; do
if $WPACLI -g /var/run/hostapd-global ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to /var/run/hostapd-global"
exit 1
fi
sleep 1
done
for j in `seq 1 10`; do
if $HAPDCLI -i as ping | grep -q PONG; then
break
fi
if [ $j = "10" ]; then
echo "Could not connect to hostapd-as-RADIUS-server"
exit 1
fi
sleep 1
done
if [ $USER = "0" -o $USER = "root" ]; then
exit 0
fi
sleep 0.75
sudo chown -f $USER $LOGDIR/hwsim0.pcapng $LOGDIR/hwsim0 $LOGDIR/log* $LOGDIR/hostapd
if [ "x$VALGRIND" = "xy" ]; then
sudo chown -f $USER $LOGDIR/*valgrind*
fi
exit 0