hostap/wpa_supplicant/sme.c
Ilan Peer d0df643735 wpa_supplicant: Call frequency conflict handling during auth
Previously, the frequency conflict was handled only during the
association flow. However, some drivers, e.g., mac80211 based
drivers, will fail an authentication request in case that there
are no available channels for use (as they might be used by
other interfaces), and thus the frequency conflict resolution
is never called.

Fix this by calling frequency conflict resolution during
authentication (SME-in-wpa_supplicant) as well.

In addition, get the shared radio frequency from the wpa_s context in
both the SME-in-driver and SME-in-wpa_supplicant cases and not from the
driver.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-04-24 12:15:32 +03:00

1401 lines
40 KiB
C

/*
* wpa_supplicant - SME
* Copyright (c) 2009-2014, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "includes.h"
#include "common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"
#include "eapol_supp/eapol_supp_sm.h"
#include "common/wpa_common.h"
#include "common/sae.h"
#include "rsn_supp/wpa.h"
#include "rsn_supp/pmksa_cache.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "wpas_glue.h"
#include "wps_supplicant.h"
#include "p2p_supplicant.h"
#include "notify.h"
#include "bss.h"
#include "scan.h"
#include "sme.h"
#include "hs20_supplicant.h"
#define SME_AUTH_TIMEOUT 5
#define SME_ASSOC_TIMEOUT 5
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx);
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx);
static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx);
#ifdef CONFIG_IEEE80211W
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_SAE
static int index_within_array(const int *array, int idx)
{
int i;
for (i = 0; i < idx; i++) {
if (array[i] <= 0)
return 0;
}
return 1;
}
static int sme_set_sae_group(struct wpa_supplicant *wpa_s)
{
int *groups = wpa_s->conf->sae_groups;
int default_groups[] = { 19, 20, 21, 25, 26, 0 };
if (!groups || groups[0] <= 0)
groups = default_groups;
/* Configuration may have changed, so validate current index */
if (!index_within_array(groups, wpa_s->sme.sae_group_index))
return -1;
for (;;) {
int group = groups[wpa_s->sme.sae_group_index];
if (group < 0)
break;
if (sae_set_group(&wpa_s->sme.sae, group) == 0) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected SAE group %d",
wpa_s->sme.sae.group);
return 0;
}
wpa_s->sme.sae_group_index++;
}
return -1;
}
static struct wpabuf * sme_auth_build_sae_commit(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
const u8 *bssid)
{
struct wpabuf *buf;
size_t len;
if (ssid->passphrase == NULL) {
wpa_printf(MSG_DEBUG, "SAE: No password available");
return NULL;
}
if (sme_set_sae_group(wpa_s) < 0) {
wpa_printf(MSG_DEBUG, "SAE: Failed to select group");
return NULL;
}
if (sae_prepare_commit(wpa_s->own_addr, bssid,
(u8 *) ssid->passphrase,
os_strlen(ssid->passphrase),
&wpa_s->sme.sae) < 0) {
wpa_printf(MSG_DEBUG, "SAE: Could not pick PWE");
return NULL;
}
len = wpa_s->sme.sae_token ? wpabuf_len(wpa_s->sme.sae_token) : 0;
buf = wpabuf_alloc(4 + SAE_COMMIT_MAX_LEN + len);
if (buf == NULL)
return NULL;
wpabuf_put_le16(buf, 1); /* Transaction seq# */
wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
sae_write_commit(&wpa_s->sme.sae, buf, wpa_s->sme.sae_token);
return buf;
}
static struct wpabuf * sme_auth_build_sae_confirm(struct wpa_supplicant *wpa_s)
{
struct wpabuf *buf;
buf = wpabuf_alloc(4 + SAE_CONFIRM_MAX_LEN);
if (buf == NULL)
return NULL;
wpabuf_put_le16(buf, 2); /* Transaction seq# */
wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
sae_write_confirm(&wpa_s->sme.sae, buf);
return buf;
}
#endif /* CONFIG_SAE */
static void sme_send_authentication(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss, struct wpa_ssid *ssid,
int start)
{
struct wpa_driver_auth_params params;
struct wpa_ssid *old_ssid;
#ifdef CONFIG_IEEE80211R
const u8 *ie;
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_IEEE80211R
const u8 *md = NULL;
#endif /* CONFIG_IEEE80211R */
int i, bssid_changed;
struct wpabuf *resp = NULL;
u8 ext_capab[10];
int ext_capab_len;
if (bss == NULL) {
wpa_msg(wpa_s, MSG_ERROR, "SME: No scan result available for "
"the network");
wpas_connect_work_done(wpa_s);
return;
}
wpa_s->current_bss = bss;
os_memset(&params, 0, sizeof(params));
wpa_s->reassociate = 0;
params.freq = bss->freq;
params.bssid = bss->bssid;
params.ssid = bss->ssid;
params.ssid_len = bss->ssid_len;
params.p2p = ssid->p2p_group;
if (wpa_s->sme.ssid_len != params.ssid_len ||
os_memcmp(wpa_s->sme.ssid, params.ssid, params.ssid_len) != 0)
wpa_s->sme.prev_bssid_set = 0;
wpa_s->sme.freq = params.freq;
os_memcpy(wpa_s->sme.ssid, params.ssid, params.ssid_len);
wpa_s->sme.ssid_len = params.ssid_len;
params.auth_alg = WPA_AUTH_ALG_OPEN;
#ifdef IEEE8021X_EAPOL
if (ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) {
if (ssid->leap) {
if (ssid->non_leap == 0)
params.auth_alg = WPA_AUTH_ALG_LEAP;
else
params.auth_alg |= WPA_AUTH_ALG_LEAP;
}
}
#endif /* IEEE8021X_EAPOL */
wpa_dbg(wpa_s, MSG_DEBUG, "Automatic auth_alg selection: 0x%x",
params.auth_alg);
if (ssid->auth_alg) {
params.auth_alg = ssid->auth_alg;
wpa_dbg(wpa_s, MSG_DEBUG, "Overriding auth_alg selection: "
"0x%x", params.auth_alg);
}
#ifdef CONFIG_SAE
if (wpa_key_mgmt_sae(ssid->key_mgmt)) {
const u8 *rsn;
struct wpa_ie_data ied;
rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
if (rsn &&
wpa_parse_wpa_ie(rsn, 2 + rsn[1], &ied) == 0) {
if (wpa_key_mgmt_sae(ied.key_mgmt)) {
wpa_dbg(wpa_s, MSG_DEBUG, "Using SAE auth_alg");
params.auth_alg = WPA_AUTH_ALG_SAE;
}
}
}
#endif /* CONFIG_SAE */
for (i = 0; i < NUM_WEP_KEYS; i++) {
if (ssid->wep_key_len[i])
params.wep_key[i] = ssid->wep_key[i];
params.wep_key_len[i] = ssid->wep_key_len[i];
}
params.wep_tx_keyidx = ssid->wep_tx_keyidx;
bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
os_memset(wpa_s->bssid, 0, ETH_ALEN);
os_memcpy(wpa_s->pending_bssid, bss->bssid, ETH_ALEN);
if (bssid_changed)
wpas_notify_bssid_changed(wpa_s);
if ((wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE) ||
wpa_bss_get_ie(bss, WLAN_EID_RSN)) &&
wpa_key_mgmt_wpa(ssid->key_mgmt)) {
int try_opportunistic;
try_opportunistic = (ssid->proactive_key_caching < 0 ?
wpa_s->conf->okc :
ssid->proactive_key_caching) &&
(ssid->proto & WPA_PROTO_RSN);
if (pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid,
wpa_s->current_ssid,
try_opportunistic) == 0)
eapol_sm_notify_pmkid_attempt(wpa_s->eapol, 1);
wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
if (wpa_supplicant_set_suites(wpa_s, bss, ssid,
wpa_s->sme.assoc_req_ie,
&wpa_s->sme.assoc_req_ie_len)) {
wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
"key management and encryption suites");
wpas_connect_work_done(wpa_s);
return;
}
} else if ((ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) &&
wpa_key_mgmt_wpa_ieee8021x(ssid->key_mgmt)) {
/*
* Both WPA and non-WPA IEEE 802.1X enabled in configuration -
* use non-WPA since the scan results did not indicate that the
* AP is using WPA or WPA2.
*/
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
wpa_s->sme.assoc_req_ie_len = 0;
} else if (wpa_key_mgmt_wpa_any(ssid->key_mgmt)) {
wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
if (wpa_supplicant_set_suites(wpa_s, NULL, ssid,
wpa_s->sme.assoc_req_ie,
&wpa_s->sme.assoc_req_ie_len)) {
wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
"key management and encryption suites (no "
"scan results)");
wpas_connect_work_done(wpa_s);
return;
}
#ifdef CONFIG_WPS
} else if (ssid->key_mgmt & WPA_KEY_MGMT_WPS) {
struct wpabuf *wps_ie;
wps_ie = wps_build_assoc_req_ie(wpas_wps_get_req_type(ssid));
if (wps_ie && wpabuf_len(wps_ie) <=
sizeof(wpa_s->sme.assoc_req_ie)) {
wpa_s->sme.assoc_req_ie_len = wpabuf_len(wps_ie);
os_memcpy(wpa_s->sme.assoc_req_ie, wpabuf_head(wps_ie),
wpa_s->sme.assoc_req_ie_len);
} else
wpa_s->sme.assoc_req_ie_len = 0;
wpabuf_free(wps_ie);
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
#endif /* CONFIG_WPS */
} else {
wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
wpa_s->sme.assoc_req_ie_len = 0;
}
#ifdef CONFIG_IEEE80211R
ie = wpa_bss_get_ie(bss, WLAN_EID_MOBILITY_DOMAIN);
if (ie && ie[1] >= MOBILITY_DOMAIN_ID_LEN)
md = ie + 2;
wpa_sm_set_ft_params(wpa_s->wpa, ie, ie ? 2 + ie[1] : 0);
if (md) {
/* Prepare for the next transition */
wpa_ft_prepare_auth_request(wpa_s->wpa, ie);
}
if (md && wpa_key_mgmt_ft(ssid->key_mgmt)) {
if (wpa_s->sme.assoc_req_ie_len + 5 <
sizeof(wpa_s->sme.assoc_req_ie)) {
struct rsn_mdie *mdie;
u8 *pos = wpa_s->sme.assoc_req_ie +
wpa_s->sme.assoc_req_ie_len;
*pos++ = WLAN_EID_MOBILITY_DOMAIN;
*pos++ = sizeof(*mdie);
mdie = (struct rsn_mdie *) pos;
os_memcpy(mdie->mobility_domain, md,
MOBILITY_DOMAIN_ID_LEN);
mdie->ft_capab = md[MOBILITY_DOMAIN_ID_LEN];
wpa_s->sme.assoc_req_ie_len += 5;
}
if (wpa_s->sme.ft_used &&
os_memcmp(md, wpa_s->sme.mobility_domain, 2) == 0 &&
wpa_sm_has_ptk(wpa_s->wpa)) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying to use FT "
"over-the-air");
params.auth_alg = WPA_AUTH_ALG_FT;
params.ie = wpa_s->sme.ft_ies;
params.ie_len = wpa_s->sme.ft_ies_len;
}
}
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_IEEE80211W
wpa_s->sme.mfp = ssid->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT ?
wpa_s->conf->pmf : ssid->ieee80211w;
if (wpa_s->sme.mfp != NO_MGMT_FRAME_PROTECTION) {
const u8 *rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
struct wpa_ie_data _ie;
if (rsn && wpa_parse_wpa_ie(rsn, 2 + rsn[1], &_ie) == 0 &&
_ie.capabilities &
(WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR)) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected AP supports "
"MFP: require MFP");
wpa_s->sme.mfp = MGMT_FRAME_PROTECTION_REQUIRED;
}
}
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_P2P
if (wpa_s->global->p2p) {
u8 *pos;
size_t len;
int res;
pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
len = sizeof(wpa_s->sme.assoc_req_ie) -
wpa_s->sme.assoc_req_ie_len;
res = wpas_p2p_assoc_req_ie(wpa_s, bss, pos, len,
ssid->p2p_group);
if (res >= 0)
wpa_s->sme.assoc_req_ie_len += res;
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_HS20
if (is_hs20_network(wpa_s, ssid, bss)) {
struct wpabuf *hs20;
hs20 = wpabuf_alloc(20);
if (hs20) {
int pps_mo_id = hs20_get_pps_mo_id(wpa_s, ssid);
wpas_hs20_add_indication(hs20, pps_mo_id);
os_memcpy(wpa_s->sme.assoc_req_ie +
wpa_s->sme.assoc_req_ie_len,
wpabuf_head(hs20), wpabuf_len(hs20));
wpa_s->sme.assoc_req_ie_len += wpabuf_len(hs20);
wpabuf_free(hs20);
}
}
#endif /* CONFIG_HS20 */
ext_capab_len = wpas_build_ext_capab(wpa_s, ext_capab);
if (ext_capab_len > 0) {
u8 *pos = wpa_s->sme.assoc_req_ie;
if (wpa_s->sme.assoc_req_ie_len > 0 && pos[0] == WLAN_EID_RSN)
pos += 2 + pos[1];
os_memmove(pos + ext_capab_len, pos,
wpa_s->sme.assoc_req_ie_len -
(pos - wpa_s->sme.assoc_req_ie));
wpa_s->sme.assoc_req_ie_len += ext_capab_len;
os_memcpy(pos, ext_capab, ext_capab_len);
}
#ifdef CONFIG_SAE
if (params.auth_alg == WPA_AUTH_ALG_SAE) {
if (start)
resp = sme_auth_build_sae_commit(wpa_s, ssid,
bss->bssid);
else
resp = sme_auth_build_sae_confirm(wpa_s);
if (resp == NULL) {
wpas_connect_work_done(wpa_s);
return;
}
params.sae_data = wpabuf_head(resp);
params.sae_data_len = wpabuf_len(resp);
wpa_s->sme.sae.state = start ? SAE_COMMITTED : SAE_CONFIRMED;
}
#endif /* CONFIG_SAE */
wpa_supplicant_cancel_sched_scan(wpa_s);
wpa_supplicant_cancel_scan(wpa_s);
wpa_msg(wpa_s, MSG_INFO, "SME: Trying to authenticate with " MACSTR
" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
wpa_ssid_txt(params.ssid, params.ssid_len), params.freq);
wpa_clear_keys(wpa_s, bss->bssid);
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
old_ssid = wpa_s->current_ssid;
wpa_s->current_ssid = ssid;
wpa_supplicant_rsn_supp_set_config(wpa_s, wpa_s->current_ssid);
wpa_supplicant_initiate_eapol(wpa_s);
if (old_ssid != wpa_s->current_ssid)
wpas_notify_network_changed(wpa_s);
#ifdef CONFIG_P2P
/*
* If multi-channel concurrency is not supported, check for any
* frequency conflict. In case of any frequency conflict, remove the
* least prioritized connection.
*/
if (wpa_s->num_multichan_concurrent < 2) {
int freq, num;
num = get_shared_radio_freqs(wpa_s, &freq, 1);
if (num > 0 && freq > 0 && freq != params.freq) {
wpa_printf(MSG_DEBUG,
"Conflicting frequency found (%d != %d)",
freq, params.freq);
if (wpas_p2p_handle_frequency_conflicts(wpa_s,
params.freq,
ssid) < 0) {
wpas_connection_failed(wpa_s, bss->bssid);
wpa_supplicant_mark_disassoc(wpa_s);
wpabuf_free(resp);
wpas_connect_work_done(wpa_s);
return;
}
}
}
#endif /* CONFIG_P2P */
wpa_s->sme.auth_alg = params.auth_alg;
if (wpa_drv_authenticate(wpa_s, &params) < 0) {
wpa_msg(wpa_s, MSG_INFO, "SME: Authentication request to the "
"driver failed");
wpas_connection_failed(wpa_s, bss->bssid);
wpa_supplicant_mark_disassoc(wpa_s);
wpabuf_free(resp);
wpas_connect_work_done(wpa_s);
return;
}
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
NULL);
/*
* Association will be started based on the authentication event from
* the driver.
*/
wpabuf_free(resp);
}
static void sme_auth_start_cb(struct wpa_radio_work *work, int deinit)
{
struct wpa_connect_work *cwork = work->ctx;
struct wpa_supplicant *wpa_s = work->wpa_s;
if (deinit) {
if (work->started)
wpa_s->connect_work = NULL;
wpas_connect_work_free(cwork);
return;
}
wpa_s->connect_work = work;
if (!wpas_valid_bss_ssid(wpa_s, cwork->bss, cwork->ssid)) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: BSS/SSID entry for authentication not valid anymore - drop connection attempt");
wpas_connect_work_done(wpa_s);
return;
}
sme_send_authentication(wpa_s, cwork->bss, cwork->ssid, 1);
}
void sme_authenticate(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss, struct wpa_ssid *ssid)
{
struct wpa_connect_work *cwork;
if (bss == NULL || ssid == NULL)
return;
if (wpa_s->connect_work) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reject sme_authenticate() call since connect_work exist");
return;
}
if (radio_work_pending(wpa_s, "sme-connect")) {
/*
* The previous sme-connect work might no longer be valid due to
* the fact that the BSS list was updated. In addition, it makes
* sense to adhere to the 'newer' decision.
*/
wpa_dbg(wpa_s, MSG_DEBUG,
"SME: Remove previous pending sme-connect");
radio_remove_works(wpa_s, "sme-connect", 0);
}
cwork = os_zalloc(sizeof(*cwork));
if (cwork == NULL)
return;
cwork->bss = bss;
cwork->ssid = ssid;
cwork->sme = 1;
#ifdef CONFIG_SAE
wpa_s->sme.sae.state = SAE_NOTHING;
wpa_s->sme.sae.send_confirm = 0;
wpa_s->sme.sae_group_index = 0;
#endif /* CONFIG_SAE */
if (radio_add_work(wpa_s, bss->freq, "sme-connect", 1,
sme_auth_start_cb, cwork) < 0)
wpas_connect_work_free(cwork);
}
#ifdef CONFIG_SAE
static int sme_sae_auth(struct wpa_supplicant *wpa_s, u16 auth_transaction,
u16 status_code, const u8 *data, size_t len)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE authentication transaction %u "
"status code %u", auth_transaction, status_code);
if (auth_transaction == 1 &&
status_code == WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ &&
wpa_s->sme.sae.state == SAE_COMMITTED &&
wpa_s->current_bss && wpa_s->current_ssid) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE anti-clogging token "
"requested");
wpabuf_free(wpa_s->sme.sae_token);
wpa_s->sme.sae_token = wpabuf_alloc_copy(data, len);
sme_send_authentication(wpa_s, wpa_s->current_bss,
wpa_s->current_ssid, 1);
return 0;
}
if (auth_transaction == 1 &&
status_code == WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED &&
wpa_s->sme.sae.state == SAE_COMMITTED &&
wpa_s->current_bss && wpa_s->current_ssid) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE group not supported");
wpa_s->sme.sae_group_index++;
if (sme_set_sae_group(wpa_s) < 0)
return -1; /* no other groups enabled */
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Try next enabled SAE group");
sme_send_authentication(wpa_s, wpa_s->current_bss,
wpa_s->current_ssid, 1);
return 0;
}
if (status_code != WLAN_STATUS_SUCCESS)
return -1;
if (auth_transaction == 1) {
int *groups = wpa_s->conf->sae_groups;
wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE commit");
if (wpa_s->current_bss == NULL ||
wpa_s->current_ssid == NULL)
return -1;
if (wpa_s->sme.sae.state != SAE_COMMITTED)
return -1;
if (groups && groups[0] <= 0)
groups = NULL;
if (sae_parse_commit(&wpa_s->sme.sae, data, len, NULL, NULL,
groups) != WLAN_STATUS_SUCCESS)
return -1;
if (sae_process_commit(&wpa_s->sme.sae) < 0) {
wpa_printf(MSG_DEBUG, "SAE: Failed to process peer "
"commit");
return -1;
}
wpabuf_free(wpa_s->sme.sae_token);
wpa_s->sme.sae_token = NULL;
sme_send_authentication(wpa_s, wpa_s->current_bss,
wpa_s->current_ssid, 0);
return 0;
} else if (auth_transaction == 2) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE confirm");
if (wpa_s->sme.sae.state != SAE_CONFIRMED)
return -1;
if (sae_check_confirm(&wpa_s->sme.sae, data, len) < 0)
return -1;
wpa_s->sme.sae.state = SAE_ACCEPTED;
sae_clear_temp_data(&wpa_s->sme.sae);
return 1;
}
return -1;
}
#endif /* CONFIG_SAE */
void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data)
{
struct wpa_ssid *ssid = wpa_s->current_ssid;
if (ssid == NULL) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
"when network is not selected");
return;
}
if (wpa_s->wpa_state != WPA_AUTHENTICATING) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
"when not in authenticating state");
return;
}
if (os_memcmp(wpa_s->pending_bssid, data->auth.peer, ETH_ALEN) != 0) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication with "
"unexpected peer " MACSTR,
MAC2STR(data->auth.peer));
return;
}
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication response: peer=" MACSTR
" auth_type=%d auth_transaction=%d status_code=%d",
MAC2STR(data->auth.peer), data->auth.auth_type,
data->auth.auth_transaction, data->auth.status_code);
wpa_hexdump(MSG_MSGDUMP, "SME: Authentication response IEs",
data->auth.ies, data->auth.ies_len);
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
#ifdef CONFIG_SAE
if (data->auth.auth_type == WLAN_AUTH_SAE) {
int res;
res = sme_sae_auth(wpa_s, data->auth.auth_transaction,
data->auth.status_code, data->auth.ies,
data->auth.ies_len);
if (res < 0) {
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
}
if (res != 1)
return;
wpa_printf(MSG_DEBUG, "SME: SAE completed - setting PMK for "
"4-way handshake");
wpa_sm_set_pmk(wpa_s->wpa, wpa_s->sme.sae.pmk, PMK_LEN);
}
#endif /* CONFIG_SAE */
if (data->auth.status_code != WLAN_STATUS_SUCCESS) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication failed (status "
"code %d)", data->auth.status_code);
if (data->auth.status_code !=
WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG ||
wpa_s->sme.auth_alg == data->auth.auth_type ||
wpa_s->current_ssid->auth_alg == WPA_AUTH_ALG_LEAP) {
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
return;
}
wpas_connect_work_done(wpa_s);
switch (data->auth.auth_type) {
case WLAN_AUTH_OPEN:
wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_SHARED;
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying SHARED auth");
wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
wpa_s->current_ssid);
return;
case WLAN_AUTH_SHARED_KEY:
wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_LEAP;
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying LEAP auth");
wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
wpa_s->current_ssid);
return;
default:
return;
}
}
#ifdef CONFIG_IEEE80211R
if (data->auth.auth_type == WLAN_AUTH_FT) {
union wpa_event_data edata;
os_memset(&edata, 0, sizeof(edata));
edata.ft_ies.ies = data->auth.ies;
edata.ft_ies.ies_len = data->auth.ies_len;
os_memcpy(edata.ft_ies.target_ap, data->auth.peer, ETH_ALEN);
wpa_supplicant_event(wpa_s, EVENT_FT_RESPONSE, &edata);
}
#endif /* CONFIG_IEEE80211R */
sme_associate(wpa_s, ssid->mode, data->auth.peer,
data->auth.auth_type);
}
void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
const u8 *bssid, u16 auth_type)
{
struct wpa_driver_associate_params params;
struct ieee802_11_elems elems;
#ifdef CONFIG_HT_OVERRIDES
struct ieee80211_ht_capabilities htcaps;
struct ieee80211_ht_capabilities htcaps_mask;
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
struct ieee80211_vht_capabilities vhtcaps;
struct ieee80211_vht_capabilities vhtcaps_mask;
#endif /* CONFIG_VHT_OVERRIDES */
os_memset(&params, 0, sizeof(params));
params.bssid = bssid;
params.ssid = wpa_s->sme.ssid;
params.ssid_len = wpa_s->sme.ssid_len;
params.freq = wpa_s->sme.freq;
params.bg_scan_period = wpa_s->current_ssid ?
wpa_s->current_ssid->bg_scan_period : -1;
params.wpa_ie = wpa_s->sme.assoc_req_ie_len ?
wpa_s->sme.assoc_req_ie : NULL;
params.wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
params.pairwise_suite = wpa_s->pairwise_cipher;
params.group_suite = wpa_s->group_cipher;
params.key_mgmt_suite = wpa_s->key_mgmt;
params.wpa_proto = wpa_s->wpa_proto;
#ifdef CONFIG_HT_OVERRIDES
os_memset(&htcaps, 0, sizeof(htcaps));
os_memset(&htcaps_mask, 0, sizeof(htcaps_mask));
params.htcaps = (u8 *) &htcaps;
params.htcaps_mask = (u8 *) &htcaps_mask;
wpa_supplicant_apply_ht_overrides(wpa_s, wpa_s->current_ssid, &params);
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
os_memset(&vhtcaps, 0, sizeof(vhtcaps));
os_memset(&vhtcaps_mask, 0, sizeof(vhtcaps_mask));
params.vhtcaps = &vhtcaps;
params.vhtcaps_mask = &vhtcaps_mask;
wpa_supplicant_apply_vht_overrides(wpa_s, wpa_s->current_ssid, &params);
#endif /* CONFIG_VHT_OVERRIDES */
#ifdef CONFIG_IEEE80211R
if (auth_type == WLAN_AUTH_FT && wpa_s->sme.ft_ies) {
params.wpa_ie = wpa_s->sme.ft_ies;
params.wpa_ie_len = wpa_s->sme.ft_ies_len;
}
#endif /* CONFIG_IEEE80211R */
params.mode = mode;
params.mgmt_frame_protection = wpa_s->sme.mfp;
if (wpa_s->sme.prev_bssid_set)
params.prev_bssid = wpa_s->sme.prev_bssid;
wpa_msg(wpa_s, MSG_INFO, "Trying to associate with " MACSTR
" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
params.ssid ? wpa_ssid_txt(params.ssid, params.ssid_len) : "",
params.freq);
wpa_supplicant_set_state(wpa_s, WPA_ASSOCIATING);
if (params.wpa_ie == NULL ||
ieee802_11_parse_elems(params.wpa_ie, params.wpa_ie_len, &elems, 0)
< 0) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Could not parse own IEs?!");
os_memset(&elems, 0, sizeof(elems));
}
if (elems.rsn_ie) {
params.wpa_proto = WPA_PROTO_RSN;
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.rsn_ie - 2,
elems.rsn_ie_len + 2);
} else if (elems.wpa_ie) {
params.wpa_proto = WPA_PROTO_WPA;
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.wpa_ie - 2,
elems.wpa_ie_len + 2);
} else if (elems.osen) {
params.wpa_proto = WPA_PROTO_OSEN;
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.osen - 2,
elems.osen_len + 2);
} else
wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
if (wpa_s->current_ssid && wpa_s->current_ssid->p2p_group)
params.p2p = 1;
if (wpa_s->parent->set_sta_uapsd)
params.uapsd = wpa_s->parent->sta_uapsd;
else
params.uapsd = -1;
if (wpa_drv_associate(wpa_s, &params) < 0) {
wpa_msg(wpa_s, MSG_INFO, "SME: Association request to the "
"driver failed");
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
return;
}
eloop_register_timeout(SME_ASSOC_TIMEOUT, 0, sme_assoc_timer, wpa_s,
NULL);
}
int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
const u8 *ies, size_t ies_len)
{
if (md == NULL || ies == NULL) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Remove mobility domain");
os_free(wpa_s->sme.ft_ies);
wpa_s->sme.ft_ies = NULL;
wpa_s->sme.ft_ies_len = 0;
wpa_s->sme.ft_used = 0;
return 0;
}
os_memcpy(wpa_s->sme.mobility_domain, md, MOBILITY_DOMAIN_ID_LEN);
wpa_hexdump(MSG_DEBUG, "SME: FT IEs", ies, ies_len);
os_free(wpa_s->sme.ft_ies);
wpa_s->sme.ft_ies = os_malloc(ies_len);
if (wpa_s->sme.ft_ies == NULL)
return -1;
os_memcpy(wpa_s->sme.ft_ies, ies, ies_len);
wpa_s->sme.ft_ies_len = ies_len;
return 0;
}
static void sme_deauth(struct wpa_supplicant *wpa_s)
{
int bssid_changed;
bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
if (wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
WLAN_REASON_DEAUTH_LEAVING) < 0) {
wpa_msg(wpa_s, MSG_INFO, "SME: Deauth request to the driver "
"failed");
}
wpa_s->sme.prev_bssid_set = 0;
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
os_memset(wpa_s->bssid, 0, ETH_ALEN);
os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
if (bssid_changed)
wpas_notify_bssid_changed(wpa_s);
}
void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
"status code %d", MAC2STR(wpa_s->pending_bssid),
data->assoc_reject.status_code);
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
/*
* For now, unconditionally terminate the previous authentication. In
* theory, this should not be needed, but mac80211 gets quite confused
* if the authentication is left pending.. Some roaming cases might
* benefit from using the previous authentication, so this could be
* optimized in the future.
*/
sme_deauth(wpa_s);
}
void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication timed out");
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_mark_disassoc(wpa_s);
}
void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association timed out");
wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
wpa_supplicant_mark_disassoc(wpa_s);
}
void sme_event_disassoc(struct wpa_supplicant *wpa_s,
struct disassoc_info *info)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Disassociation event received");
if (wpa_s->sme.prev_bssid_set) {
/*
* cfg80211/mac80211 can get into somewhat confused state if
* the AP only disassociates us and leaves us in authenticated
* state. For now, force the state to be cleared to avoid
* confusing errors if we try to associate with the AP again.
*/
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Deauthenticate to clear "
"driver state");
wpa_drv_deauthenticate(wpa_s, wpa_s->sme.prev_bssid,
WLAN_REASON_DEAUTH_LEAVING);
}
}
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
if (wpa_s->wpa_state == WPA_AUTHENTICATING) {
wpa_msg(wpa_s, MSG_DEBUG, "SME: Authentication timeout");
sme_deauth(wpa_s);
}
}
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
if (wpa_s->wpa_state == WPA_ASSOCIATING) {
wpa_msg(wpa_s, MSG_DEBUG, "SME: Association timeout");
sme_deauth(wpa_s);
}
}
void sme_state_changed(struct wpa_supplicant *wpa_s)
{
/* Make sure timers are cleaned up appropriately. */
if (wpa_s->wpa_state != WPA_ASSOCIATING)
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
if (wpa_s->wpa_state != WPA_AUTHENTICATING)
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
}
void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
const u8 *prev_pending_bssid)
{
/*
* mac80211-workaround to force deauth on failed auth cmd,
* requires us to remain in authenticating state to allow the
* second authentication attempt to be continued properly.
*/
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
"to proceed after disconnection event");
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);
/*
* Re-arm authentication timer in case auth fails for whatever reason.
*/
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
NULL);
}
void sme_deinit(struct wpa_supplicant *wpa_s)
{
os_free(wpa_s->sme.ft_ies);
wpa_s->sme.ft_ies = NULL;
wpa_s->sme.ft_ies_len = 0;
#ifdef CONFIG_IEEE80211W
sme_stop_sa_query(wpa_s);
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_SAE
wpabuf_free(wpa_s->sme.sae_token);
wpa_s->sme.sae_token = NULL;
sae_clear_data(&wpa_s->sme.sae);
#endif /* CONFIG_SAE */
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
}
static void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
const u8 *chan_list, u8 num_channels,
u8 num_intol)
{
struct ieee80211_2040_bss_coex_ie *bc_ie;
struct ieee80211_2040_intol_chan_report *ic_report;
struct wpabuf *buf;
wpa_printf(MSG_DEBUG, "SME: Send 20/40 BSS Coexistence to " MACSTR
" (num_channels=%u num_intol=%u)",
MAC2STR(wpa_s->bssid), num_channels, num_intol);
wpa_hexdump(MSG_DEBUG, "SME: 20/40 BSS Intolerant Channels",
chan_list, num_channels);
buf = wpabuf_alloc(2 + /* action.category + action_code */
sizeof(struct ieee80211_2040_bss_coex_ie) +
sizeof(struct ieee80211_2040_intol_chan_report) +
num_channels);
if (buf == NULL)
return;
wpabuf_put_u8(buf, WLAN_ACTION_PUBLIC);
wpabuf_put_u8(buf, WLAN_PA_20_40_BSS_COEX);
bc_ie = wpabuf_put(buf, sizeof(*bc_ie));
bc_ie->element_id = WLAN_EID_20_40_BSS_COEXISTENCE;
bc_ie->length = 1;
if (num_intol)
bc_ie->coex_param |= WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ;
if (num_channels > 0) {
ic_report = wpabuf_put(buf, sizeof(*ic_report));
ic_report->element_id = WLAN_EID_20_40_BSS_INTOLERANT;
ic_report->length = num_channels + 1;
ic_report->op_class = 0;
os_memcpy(wpabuf_put(buf, num_channels), chan_list,
num_channels);
}
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
wpa_s->own_addr, wpa_s->bssid,
wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
wpa_msg(wpa_s, MSG_INFO,
"SME: Failed to send 20/40 BSS Coexistence frame");
}
wpabuf_free(buf);
}
int sme_proc_obss_scan(struct wpa_supplicant *wpa_s)
{
struct wpa_bss *bss;
const u8 *ie;
u16 ht_cap;
u8 chan_list[P2P_MAX_CHANNELS], channel;
u8 num_channels = 0, num_intol = 0, i;
if (!wpa_s->sme.sched_obss_scan)
return 0;
wpa_s->sme.sched_obss_scan = 0;
if (!wpa_s->current_bss || wpa_s->wpa_state != WPA_COMPLETED)
return 1;
/*
* Check whether AP uses regulatory triplet or channel triplet in
* country info. Right now the operating class of the BSS channel
* width trigger event is "unknown" (IEEE Std 802.11-2012 10.15.12),
* based on the assumption that operating class triplet is not used in
* beacon frame. If the First Channel Number/Operating Extension
* Identifier octet has a positive integer value of 201 or greater,
* then its operating class triplet.
*
* TODO: If Supported Operating Classes element is present in beacon
* frame, have to lookup operating class in Annex E and fill them in
* 2040 coex frame.
*/
ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_COUNTRY);
if (ie && (ie[1] >= 6) && (ie[5] >= 201))
return 1;
os_memset(chan_list, 0, sizeof(chan_list));
dl_list_for_each(bss, &wpa_s->bss, struct wpa_bss, list) {
/* Skip other band bss */
enum hostapd_hw_mode mode;
mode = ieee80211_freq_to_chan(bss->freq, &channel);
if (mode != HOSTAPD_MODE_IEEE80211G &&
mode != HOSTAPD_MODE_IEEE80211B)
continue;
ie = wpa_bss_get_ie(bss, WLAN_EID_HT_CAP);
ht_cap = (ie && (ie[1] == 26)) ? WPA_GET_LE16(ie + 2) : 0;
wpa_printf(MSG_DEBUG, "SME OBSS scan BSS " MACSTR
" freq=%u chan=%u ht_cap=0x%x",
MAC2STR(bss->bssid), bss->freq, channel, ht_cap);
if (!ht_cap || (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)) {
if (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)
num_intol++;
/* Check whether the channel is already considered */
for (i = 0; i < num_channels; i++) {
if (channel == chan_list[i])
break;
}
if (i != num_channels)
continue;
chan_list[num_channels++] = channel;
}
}
sme_send_2040_bss_coex(wpa_s, chan_list, num_channels, num_intol);
return 1;
}
static struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
u16 num_modes,
enum hostapd_hw_mode mode)
{
u16 i;
for (i = 0; i < num_modes; i++) {
if (modes[i].mode == mode)
return &modes[i];
}
return NULL;
}
static void wpa_setband_scan_freqs_list(struct wpa_supplicant *wpa_s,
enum hostapd_hw_mode band,
struct wpa_driver_scan_params *params)
{
/* Include only supported channels for the specified band */
struct hostapd_hw_modes *mode;
int count, i;
mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band);
if (mode == NULL) {
/* No channels supported in this band - use empty list */
params->freqs = os_zalloc(sizeof(int));
return;
}
params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
if (params->freqs == NULL)
return;
for (count = 0, i = 0; i < mode->num_channels; i++) {
if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
continue;
params->freqs[count++] = mode->channels[i].freq;
}
}
static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
struct wpa_driver_scan_params params;
if (!wpa_s->current_bss) {
wpa_printf(MSG_DEBUG, "SME OBSS: Ignore scan request");
return;
}
os_memset(&params, 0, sizeof(params));
wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, &params);
wpa_printf(MSG_DEBUG, "SME OBSS: Request an OBSS scan");
if (wpa_supplicant_trigger_scan(wpa_s, &params))
wpa_printf(MSG_DEBUG, "SME OBSS: Failed to trigger scan");
else
wpa_s->sme.sched_obss_scan = 1;
os_free(params.freqs);
eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
sme_obss_scan_timeout, wpa_s, NULL);
}
void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
{
const u8 *ie;
struct wpa_bss *bss = wpa_s->current_bss;
struct wpa_ssid *ssid = wpa_s->current_ssid;
struct hostapd_hw_modes *hw_mode = NULL;
int i;
eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
wpa_s->sme.sched_obss_scan = 0;
if (!enable)
return;
/*
* Schedule OBSS scan if driver is using station SME in wpa_supplicant
* or it expects OBSS scan to be performed by wpa_supplicant.
*/
if (!((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) ||
(wpa_s->drv_flags & WPA_DRIVER_FLAGS_OBSS_SCAN)) ||
ssid == NULL || ssid->mode != IEEE80211_MODE_INFRA)
return;
if (!wpa_s->hw.modes)
return;
/* only HT caps in 11g mode are relevant */
for (i = 0; i < wpa_s->hw.num_modes; i++) {
hw_mode = &wpa_s->hw.modes[i];
if (hw_mode->mode == HOSTAPD_MODE_IEEE80211G)
break;
}
/* Driver does not support HT40 for 11g or doesn't have 11g. */
if (i == wpa_s->hw.num_modes || !hw_mode ||
!(hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
return;
if (bss == NULL || bss->freq < 2400 || bss->freq > 2500)
return; /* Not associated on 2.4 GHz band */
/* Check whether AP supports HT40 */
ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_CAP);
if (!ie || ie[1] < 2 ||
!(WPA_GET_LE16(ie + 2) & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
return; /* AP does not support HT40 */
ie = wpa_bss_get_ie(wpa_s->current_bss,
WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS);
if (!ie || ie[1] < 14)
return; /* AP does not request OBSS scans */
wpa_s->sme.obss_scan_int = WPA_GET_LE16(ie + 6);
if (wpa_s->sme.obss_scan_int < 10) {
wpa_printf(MSG_DEBUG, "SME: Invalid OBSS Scan Interval %u "
"replaced with the minimum 10 sec",
wpa_s->sme.obss_scan_int);
wpa_s->sme.obss_scan_int = 10;
}
wpa_printf(MSG_DEBUG, "SME: OBSS Scan Interval %u sec",
wpa_s->sme.obss_scan_int);
eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
sme_obss_scan_timeout, wpa_s, NULL);
}
#ifdef CONFIG_IEEE80211W
static const unsigned int sa_query_max_timeout = 1000;
static const unsigned int sa_query_retry_timeout = 201;
static int sme_check_sa_query_timeout(struct wpa_supplicant *wpa_s)
{
u32 tu;
struct os_reltime now, passed;
os_get_reltime(&now);
os_reltime_sub(&now, &wpa_s->sme.sa_query_start, &passed);
tu = (passed.sec * 1000000 + passed.usec) / 1024;
if (sa_query_max_timeout < tu) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: SA Query timed out");
sme_stop_sa_query(wpa_s);
wpa_supplicant_deauthenticate(
wpa_s, WLAN_REASON_PREV_AUTH_NOT_VALID);
return 1;
}
return 0;
}
static void sme_send_sa_query_req(struct wpa_supplicant *wpa_s,
const u8 *trans_id)
{
u8 req[2 + WLAN_SA_QUERY_TR_ID_LEN];
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Sending SA Query Request to "
MACSTR, MAC2STR(wpa_s->bssid));
wpa_hexdump(MSG_DEBUG, "SME: SA Query Transaction ID",
trans_id, WLAN_SA_QUERY_TR_ID_LEN);
req[0] = WLAN_ACTION_SA_QUERY;
req[1] = WLAN_SA_QUERY_REQUEST;
os_memcpy(req + 2, trans_id, WLAN_SA_QUERY_TR_ID_LEN);
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
wpa_s->own_addr, wpa_s->bssid,
req, sizeof(req), 0) < 0)
wpa_msg(wpa_s, MSG_INFO, "SME: Failed to send SA Query "
"Request");
}
static void sme_sa_query_timer(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
unsigned int timeout, sec, usec;
u8 *trans_id, *nbuf;
if (wpa_s->sme.sa_query_count > 0 &&
sme_check_sa_query_timeout(wpa_s))
return;
nbuf = os_realloc_array(wpa_s->sme.sa_query_trans_id,
wpa_s->sme.sa_query_count + 1,
WLAN_SA_QUERY_TR_ID_LEN);
if (nbuf == NULL)
return;
if (wpa_s->sme.sa_query_count == 0) {
/* Starting a new SA Query procedure */
os_get_reltime(&wpa_s->sme.sa_query_start);
}
trans_id = nbuf + wpa_s->sme.sa_query_count * WLAN_SA_QUERY_TR_ID_LEN;
wpa_s->sme.sa_query_trans_id = nbuf;
wpa_s->sme.sa_query_count++;
os_get_random(trans_id, WLAN_SA_QUERY_TR_ID_LEN);
timeout = sa_query_retry_timeout;
sec = ((timeout / 1000) * 1024) / 1000;
usec = (timeout % 1000) * 1024;
eloop_register_timeout(sec, usec, sme_sa_query_timer, wpa_s, NULL);
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association SA Query attempt %d",
wpa_s->sme.sa_query_count);
sme_send_sa_query_req(wpa_s, trans_id);
}
static void sme_start_sa_query(struct wpa_supplicant *wpa_s)
{
sme_sa_query_timer(wpa_s, NULL);
}
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s)
{
eloop_cancel_timeout(sme_sa_query_timer, wpa_s, NULL);
os_free(wpa_s->sme.sa_query_trans_id);
wpa_s->sme.sa_query_trans_id = NULL;
wpa_s->sme.sa_query_count = 0;
}
void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
const u8 *da, u16 reason_code)
{
struct wpa_ssid *ssid;
if (wpa_s->wpa_state != WPA_COMPLETED)
return;
ssid = wpa_s->current_ssid;
if (ssid == NULL ||
(ssid->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT ?
wpa_s->conf->pmf : ssid->ieee80211w) == NO_MGMT_FRAME_PROTECTION)
return;
if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
return;
if (reason_code != WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA &&
reason_code != WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA)
return;
if (wpa_s->sme.sa_query_count > 0)
return;
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Unprotected disconnect dropped - "
"possible AP/STA state mismatch - trigger SA Query");
sme_start_sa_query(wpa_s);
}
void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *sa,
const u8 *data, size_t len)
{
int i;
if (wpa_s->sme.sa_query_trans_id == NULL ||
len < 1 + WLAN_SA_QUERY_TR_ID_LEN ||
data[0] != WLAN_SA_QUERY_RESPONSE)
return;
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Received SA Query response from "
MACSTR " (trans_id %02x%02x)", MAC2STR(sa), data[1], data[2]);
if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
return;
for (i = 0; i < wpa_s->sme.sa_query_count; i++) {
if (os_memcmp(wpa_s->sme.sa_query_trans_id +
i * WLAN_SA_QUERY_TR_ID_LEN,
data + 1, WLAN_SA_QUERY_TR_ID_LEN) == 0)
break;
}
if (i >= wpa_s->sme.sa_query_count) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: No matching SA Query "
"transaction identifier found");
return;
}
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reply to pending SA Query received "
"from " MACSTR, MAC2STR(sa));
sme_stop_sa_query(wpa_s);
}
#endif /* CONFIG_IEEE80211W */