e19c1d2cc7
Commit 95b6bca66d
('Add rsn_pairwise bits
to set_ieee8021x() driver_ops') modified cipher configuration to use
unconditionally wpa_pairwise | rsn_pairwise. While that works for many
cases, it does not handle the case of dynamic configuration changes over
the control interface where wpa_pairwise or rsn_pairwise values may not
get cleared when the wpa parameter is modified. Fix this inconsistency
by configuring the driver with only the bits that are valid for the
currently enabled WPA/WPA2 version(s).
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
1117 lines
30 KiB
C
1117 lines
30 KiB
C
/*
|
|
* hostapd / IEEE 802.11 Management: Beacon and Probe Request/Response
|
|
* Copyright (c) 2002-2004, Instant802 Networks, Inc.
|
|
* Copyright (c) 2005-2006, Devicescape Software, Inc.
|
|
* Copyright (c) 2008-2012, Jouni Malinen <j@w1.fi>
|
|
*
|
|
* This software may be distributed under the terms of the BSD license.
|
|
* See README for more details.
|
|
*/
|
|
|
|
#include "utils/includes.h"
|
|
|
|
#ifndef CONFIG_NATIVE_WINDOWS
|
|
|
|
#include "utils/common.h"
|
|
#include "common/ieee802_11_defs.h"
|
|
#include "common/ieee802_11_common.h"
|
|
#include "common/hw_features_common.h"
|
|
#include "wps/wps_defs.h"
|
|
#include "p2p/p2p.h"
|
|
#include "hostapd.h"
|
|
#include "ieee802_11.h"
|
|
#include "wpa_auth.h"
|
|
#include "wmm.h"
|
|
#include "ap_config.h"
|
|
#include "sta_info.h"
|
|
#include "p2p_hostapd.h"
|
|
#include "ap_drv_ops.h"
|
|
#include "beacon.h"
|
|
#include "hs20.h"
|
|
#include "dfs.h"
|
|
|
|
|
|
#ifdef NEED_AP_MLME
|
|
|
|
static u8 * hostapd_eid_rm_enabled_capab(struct hostapd_data *hapd, u8 *eid,
|
|
size_t len)
|
|
{
|
|
if (!hapd->conf->radio_measurements || len < 2 + 4)
|
|
return eid;
|
|
|
|
*eid++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
|
|
*eid++ = 5;
|
|
*eid++ = (hapd->conf->radio_measurements & BIT(0)) ?
|
|
WLAN_RRM_CAPS_NEIGHBOR_REPORT : 0x00;
|
|
*eid++ = 0x00;
|
|
*eid++ = 0x00;
|
|
*eid++ = 0x00;
|
|
*eid++ = 0x00;
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_bss_load(struct hostapd_data *hapd, u8 *eid, size_t len)
|
|
{
|
|
if (len < 2 + 5)
|
|
return eid;
|
|
|
|
#ifdef CONFIG_TESTING_OPTIONS
|
|
if (hapd->conf->bss_load_test_set) {
|
|
*eid++ = WLAN_EID_BSS_LOAD;
|
|
*eid++ = 5;
|
|
os_memcpy(eid, hapd->conf->bss_load_test, 5);
|
|
eid += 5;
|
|
return eid;
|
|
}
|
|
#endif /* CONFIG_TESTING_OPTIONS */
|
|
if (hapd->conf->bss_load_update_period) {
|
|
*eid++ = WLAN_EID_BSS_LOAD;
|
|
*eid++ = 5;
|
|
WPA_PUT_LE16(eid, hapd->num_sta);
|
|
eid += 2;
|
|
*eid++ = hapd->iface->channel_utilization;
|
|
WPA_PUT_LE16(eid, 0); /* no available admission capabity */
|
|
eid += 2;
|
|
}
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 ieee802_11_erp_info(struct hostapd_data *hapd)
|
|
{
|
|
u8 erp = 0;
|
|
|
|
if (hapd->iface->current_mode == NULL ||
|
|
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
|
|
return 0;
|
|
|
|
if (hapd->iface->olbc)
|
|
erp |= ERP_INFO_USE_PROTECTION;
|
|
if (hapd->iface->num_sta_non_erp > 0) {
|
|
erp |= ERP_INFO_NON_ERP_PRESENT |
|
|
ERP_INFO_USE_PROTECTION;
|
|
}
|
|
if (hapd->iface->num_sta_no_short_preamble > 0 ||
|
|
hapd->iconf->preamble == LONG_PREAMBLE)
|
|
erp |= ERP_INFO_BARKER_PREAMBLE_MODE;
|
|
|
|
return erp;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_ds_params(struct hostapd_data *hapd, u8 *eid)
|
|
{
|
|
*eid++ = WLAN_EID_DS_PARAMS;
|
|
*eid++ = 1;
|
|
*eid++ = hapd->iconf->channel;
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_erp_info(struct hostapd_data *hapd, u8 *eid)
|
|
{
|
|
if (hapd->iface->current_mode == NULL ||
|
|
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
|
|
return eid;
|
|
|
|
/* Set NonERP_present and use_protection bits if there
|
|
* are any associated NonERP stations. */
|
|
/* TODO: use_protection bit can be set to zero even if
|
|
* there are NonERP stations present. This optimization
|
|
* might be useful if NonERP stations are "quiet".
|
|
* See 802.11g/D6 E-1 for recommended practice.
|
|
* In addition, Non ERP present might be set, if AP detects Non ERP
|
|
* operation on other APs. */
|
|
|
|
/* Add ERP Information element */
|
|
*eid++ = WLAN_EID_ERP_INFO;
|
|
*eid++ = 1;
|
|
*eid++ = ieee802_11_erp_info(hapd);
|
|
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_pwr_constraint(struct hostapd_data *hapd, u8 *eid)
|
|
{
|
|
u8 *pos = eid;
|
|
u8 local_pwr_constraint = 0;
|
|
int dfs;
|
|
|
|
if (hapd->iface->current_mode == NULL ||
|
|
hapd->iface->current_mode->mode != HOSTAPD_MODE_IEEE80211A)
|
|
return eid;
|
|
|
|
/* Let host drivers add this IE if DFS support is offloaded */
|
|
if (hapd->iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
|
|
return eid;
|
|
|
|
/*
|
|
* There is no DFS support and power constraint was not directly
|
|
* requested by config option.
|
|
*/
|
|
if (!hapd->iconf->ieee80211h &&
|
|
hapd->iconf->local_pwr_constraint == -1)
|
|
return eid;
|
|
|
|
/* Check if DFS is required by regulatory. */
|
|
dfs = hostapd_is_dfs_required(hapd->iface);
|
|
if (dfs < 0) {
|
|
wpa_printf(MSG_WARNING, "Failed to check if DFS is required; ret=%d",
|
|
dfs);
|
|
dfs = 0;
|
|
}
|
|
|
|
if (dfs == 0 && hapd->iconf->local_pwr_constraint == -1)
|
|
return eid;
|
|
|
|
/*
|
|
* ieee80211h (DFS) is enabled so Power Constraint element shall
|
|
* be added when running on DFS channel whenever local_pwr_constraint
|
|
* is configured or not. In order to meet regulations when TPC is not
|
|
* implemented using a transmit power that is below the legal maximum
|
|
* (including any mitigation factor) should help. In this case,
|
|
* indicate 3 dB below maximum allowed transmit power.
|
|
*/
|
|
if (hapd->iconf->local_pwr_constraint == -1)
|
|
local_pwr_constraint = 3;
|
|
|
|
/*
|
|
* A STA that is not an AP shall use a transmit power less than or
|
|
* equal to the local maximum transmit power level for the channel.
|
|
* The local maximum transmit power can be calculated from the formula:
|
|
* local max TX pwr = max TX pwr - local pwr constraint
|
|
* Where max TX pwr is maximum transmit power level specified for
|
|
* channel in Country element and local pwr constraint is specified
|
|
* for channel in this Power Constraint element.
|
|
*/
|
|
|
|
/* Element ID */
|
|
*pos++ = WLAN_EID_PWR_CONSTRAINT;
|
|
/* Length */
|
|
*pos++ = 1;
|
|
/* Local Power Constraint */
|
|
if (local_pwr_constraint)
|
|
*pos++ = local_pwr_constraint;
|
|
else
|
|
*pos++ = hapd->iconf->local_pwr_constraint;
|
|
|
|
return pos;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_country_add(u8 *pos, u8 *end, int chan_spacing,
|
|
struct hostapd_channel_data *start,
|
|
struct hostapd_channel_data *prev)
|
|
{
|
|
if (end - pos < 3)
|
|
return pos;
|
|
|
|
/* first channel number */
|
|
*pos++ = start->chan;
|
|
/* number of channels */
|
|
*pos++ = (prev->chan - start->chan) / chan_spacing + 1;
|
|
/* maximum transmit power level */
|
|
*pos++ = start->max_tx_power;
|
|
|
|
return pos;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_country(struct hostapd_data *hapd, u8 *eid,
|
|
int max_len)
|
|
{
|
|
u8 *pos = eid;
|
|
u8 *end = eid + max_len;
|
|
int i;
|
|
struct hostapd_hw_modes *mode;
|
|
struct hostapd_channel_data *start, *prev;
|
|
int chan_spacing = 1;
|
|
|
|
if (!hapd->iconf->ieee80211d || max_len < 6 ||
|
|
hapd->iface->current_mode == NULL)
|
|
return eid;
|
|
|
|
*pos++ = WLAN_EID_COUNTRY;
|
|
pos++; /* length will be set later */
|
|
os_memcpy(pos, hapd->iconf->country, 3); /* e.g., 'US ' */
|
|
pos += 3;
|
|
|
|
mode = hapd->iface->current_mode;
|
|
if (mode->mode == HOSTAPD_MODE_IEEE80211A)
|
|
chan_spacing = 4;
|
|
|
|
start = prev = NULL;
|
|
for (i = 0; i < mode->num_channels; i++) {
|
|
struct hostapd_channel_data *chan = &mode->channels[i];
|
|
if (chan->flag & HOSTAPD_CHAN_DISABLED)
|
|
continue;
|
|
if (start && prev &&
|
|
prev->chan + chan_spacing == chan->chan &&
|
|
start->max_tx_power == chan->max_tx_power) {
|
|
prev = chan;
|
|
continue; /* can use same entry */
|
|
}
|
|
|
|
if (start && prev) {
|
|
pos = hostapd_eid_country_add(pos, end, chan_spacing,
|
|
start, prev);
|
|
start = NULL;
|
|
}
|
|
|
|
/* Start new group */
|
|
start = prev = chan;
|
|
}
|
|
|
|
if (start) {
|
|
pos = hostapd_eid_country_add(pos, end, chan_spacing,
|
|
start, prev);
|
|
}
|
|
|
|
if ((pos - eid) & 1) {
|
|
if (end - pos < 1)
|
|
return eid;
|
|
*pos++ = 0; /* pad for 16-bit alignment */
|
|
}
|
|
|
|
eid[1] = (pos - eid) - 2;
|
|
|
|
return pos;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_wpa(struct hostapd_data *hapd, u8 *eid, size_t len)
|
|
{
|
|
const u8 *ie;
|
|
size_t ielen;
|
|
|
|
ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &ielen);
|
|
if (ie == NULL || ielen > len)
|
|
return eid;
|
|
|
|
os_memcpy(eid, ie, ielen);
|
|
return eid + ielen;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_csa(struct hostapd_data *hapd, u8 *eid)
|
|
{
|
|
u8 chan;
|
|
|
|
if (!hapd->cs_freq_params.freq)
|
|
return eid;
|
|
|
|
if (ieee80211_freq_to_chan(hapd->cs_freq_params.freq, &chan) ==
|
|
NUM_HOSTAPD_MODES)
|
|
return eid;
|
|
|
|
*eid++ = WLAN_EID_CHANNEL_SWITCH;
|
|
*eid++ = 3;
|
|
*eid++ = hapd->cs_block_tx;
|
|
*eid++ = chan;
|
|
*eid++ = hapd->cs_count;
|
|
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_eid_secondary_channel(struct hostapd_data *hapd, u8 *eid)
|
|
{
|
|
u8 sec_ch;
|
|
|
|
if (!hapd->cs_freq_params.sec_channel_offset)
|
|
return eid;
|
|
|
|
if (hapd->cs_freq_params.sec_channel_offset == -1)
|
|
sec_ch = HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW;
|
|
else if (hapd->cs_freq_params.sec_channel_offset == 1)
|
|
sec_ch = HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE;
|
|
else
|
|
return eid;
|
|
|
|
*eid++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET;
|
|
*eid++ = 1;
|
|
*eid++ = sec_ch;
|
|
|
|
return eid;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_add_csa_elems(struct hostapd_data *hapd, u8 *pos,
|
|
u8 *start, unsigned int *csa_counter_off)
|
|
{
|
|
u8 *old_pos = pos;
|
|
|
|
if (!csa_counter_off)
|
|
return pos;
|
|
|
|
*csa_counter_off = 0;
|
|
pos = hostapd_eid_csa(hapd, pos);
|
|
|
|
if (pos != old_pos) {
|
|
/* save an offset to the counter - should be last byte */
|
|
*csa_counter_off = pos - start - 1;
|
|
pos = hostapd_eid_secondary_channel(hapd, pos);
|
|
}
|
|
|
|
return pos;
|
|
}
|
|
|
|
|
|
static u8 * hostapd_gen_probe_resp(struct hostapd_data *hapd,
|
|
const struct ieee80211_mgmt *req,
|
|
int is_p2p, size_t *resp_len)
|
|
{
|
|
struct ieee80211_mgmt *resp;
|
|
u8 *pos, *epos;
|
|
size_t buflen;
|
|
|
|
#define MAX_PROBERESP_LEN 768
|
|
buflen = MAX_PROBERESP_LEN;
|
|
#ifdef CONFIG_WPS
|
|
if (hapd->wps_probe_resp_ie)
|
|
buflen += wpabuf_len(hapd->wps_probe_resp_ie);
|
|
#endif /* CONFIG_WPS */
|
|
#ifdef CONFIG_P2P
|
|
if (hapd->p2p_probe_resp_ie)
|
|
buflen += wpabuf_len(hapd->p2p_probe_resp_ie);
|
|
#endif /* CONFIG_P2P */
|
|
if (hapd->conf->vendor_elements)
|
|
buflen += wpabuf_len(hapd->conf->vendor_elements);
|
|
if (hapd->conf->vendor_vht) {
|
|
buflen += 5 + 2 + sizeof(struct ieee80211_vht_capabilities) +
|
|
2 + sizeof(struct ieee80211_vht_operation);
|
|
}
|
|
resp = os_zalloc(buflen);
|
|
if (resp == NULL)
|
|
return NULL;
|
|
|
|
epos = ((u8 *) resp) + MAX_PROBERESP_LEN;
|
|
|
|
resp->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
|
|
WLAN_FC_STYPE_PROBE_RESP);
|
|
if (req)
|
|
os_memcpy(resp->da, req->sa, ETH_ALEN);
|
|
os_memcpy(resp->sa, hapd->own_addr, ETH_ALEN);
|
|
|
|
os_memcpy(resp->bssid, hapd->own_addr, ETH_ALEN);
|
|
resp->u.probe_resp.beacon_int =
|
|
host_to_le16(hapd->iconf->beacon_int);
|
|
|
|
/* hardware or low-level driver will setup seq_ctrl and timestamp */
|
|
resp->u.probe_resp.capab_info =
|
|
host_to_le16(hostapd_own_capab_info(hapd));
|
|
|
|
pos = resp->u.probe_resp.variable;
|
|
*pos++ = WLAN_EID_SSID;
|
|
*pos++ = hapd->conf->ssid.ssid_len;
|
|
os_memcpy(pos, hapd->conf->ssid.ssid, hapd->conf->ssid.ssid_len);
|
|
pos += hapd->conf->ssid.ssid_len;
|
|
|
|
/* Supported rates */
|
|
pos = hostapd_eid_supp_rates(hapd, pos);
|
|
|
|
/* DS Params */
|
|
pos = hostapd_eid_ds_params(hapd, pos);
|
|
|
|
pos = hostapd_eid_country(hapd, pos, epos - pos);
|
|
|
|
/* Power Constraint element */
|
|
pos = hostapd_eid_pwr_constraint(hapd, pos);
|
|
|
|
/* ERP Information element */
|
|
pos = hostapd_eid_erp_info(hapd, pos);
|
|
|
|
/* Extended supported rates */
|
|
pos = hostapd_eid_ext_supp_rates(hapd, pos);
|
|
|
|
/* RSN, MDIE, WPA */
|
|
pos = hostapd_eid_wpa(hapd, pos, epos - pos);
|
|
|
|
pos = hostapd_eid_bss_load(hapd, pos, epos - pos);
|
|
|
|
pos = hostapd_eid_rm_enabled_capab(hapd, pos, epos - pos);
|
|
|
|
#ifdef CONFIG_IEEE80211N
|
|
pos = hostapd_eid_ht_capabilities(hapd, pos);
|
|
pos = hostapd_eid_ht_operation(hapd, pos);
|
|
#endif /* CONFIG_IEEE80211N */
|
|
|
|
pos = hostapd_eid_ext_capab(hapd, pos);
|
|
|
|
pos = hostapd_eid_time_adv(hapd, pos);
|
|
pos = hostapd_eid_time_zone(hapd, pos);
|
|
|
|
pos = hostapd_eid_interworking(hapd, pos);
|
|
pos = hostapd_eid_adv_proto(hapd, pos);
|
|
pos = hostapd_eid_roaming_consortium(hapd, pos);
|
|
|
|
pos = hostapd_add_csa_elems(hapd, pos, (u8 *)resp,
|
|
&hapd->cs_c_off_proberesp);
|
|
#ifdef CONFIG_IEEE80211AC
|
|
if (hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac) {
|
|
pos = hostapd_eid_vht_capabilities(hapd, pos);
|
|
pos = hostapd_eid_vht_operation(hapd, pos);
|
|
}
|
|
if (hapd->conf->vendor_vht)
|
|
pos = hostapd_eid_vendor_vht(hapd, pos);
|
|
#endif /* CONFIG_IEEE80211AC */
|
|
|
|
/* Wi-Fi Alliance WMM */
|
|
pos = hostapd_eid_wmm(hapd, pos);
|
|
|
|
#ifdef CONFIG_WPS
|
|
if (hapd->conf->wps_state && hapd->wps_probe_resp_ie) {
|
|
os_memcpy(pos, wpabuf_head(hapd->wps_probe_resp_ie),
|
|
wpabuf_len(hapd->wps_probe_resp_ie));
|
|
pos += wpabuf_len(hapd->wps_probe_resp_ie);
|
|
}
|
|
#endif /* CONFIG_WPS */
|
|
|
|
#ifdef CONFIG_P2P
|
|
if ((hapd->conf->p2p & P2P_ENABLED) && is_p2p &&
|
|
hapd->p2p_probe_resp_ie) {
|
|
os_memcpy(pos, wpabuf_head(hapd->p2p_probe_resp_ie),
|
|
wpabuf_len(hapd->p2p_probe_resp_ie));
|
|
pos += wpabuf_len(hapd->p2p_probe_resp_ie);
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
#ifdef CONFIG_P2P_MANAGER
|
|
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
|
|
P2P_MANAGE)
|
|
pos = hostapd_eid_p2p_manage(hapd, pos);
|
|
#endif /* CONFIG_P2P_MANAGER */
|
|
|
|
#ifdef CONFIG_HS20
|
|
pos = hostapd_eid_hs20_indication(hapd, pos);
|
|
pos = hostapd_eid_osen(hapd, pos);
|
|
#endif /* CONFIG_HS20 */
|
|
|
|
if (hapd->conf->vendor_elements) {
|
|
os_memcpy(pos, wpabuf_head(hapd->conf->vendor_elements),
|
|
wpabuf_len(hapd->conf->vendor_elements));
|
|
pos += wpabuf_len(hapd->conf->vendor_elements);
|
|
}
|
|
|
|
*resp_len = pos - (u8 *) resp;
|
|
return (u8 *) resp;
|
|
}
|
|
|
|
|
|
enum ssid_match_result {
|
|
NO_SSID_MATCH,
|
|
EXACT_SSID_MATCH,
|
|
WILDCARD_SSID_MATCH
|
|
};
|
|
|
|
static enum ssid_match_result ssid_match(struct hostapd_data *hapd,
|
|
const u8 *ssid, size_t ssid_len,
|
|
const u8 *ssid_list,
|
|
size_t ssid_list_len)
|
|
{
|
|
const u8 *pos, *end;
|
|
int wildcard = 0;
|
|
|
|
if (ssid_len == 0)
|
|
wildcard = 1;
|
|
if (ssid_len == hapd->conf->ssid.ssid_len &&
|
|
os_memcmp(ssid, hapd->conf->ssid.ssid, ssid_len) == 0)
|
|
return EXACT_SSID_MATCH;
|
|
|
|
if (ssid_list == NULL)
|
|
return wildcard ? WILDCARD_SSID_MATCH : NO_SSID_MATCH;
|
|
|
|
pos = ssid_list;
|
|
end = ssid_list + ssid_list_len;
|
|
while (pos + 1 <= end) {
|
|
if (pos + 2 + pos[1] > end)
|
|
break;
|
|
if (pos[1] == 0)
|
|
wildcard = 1;
|
|
if (pos[1] == hapd->conf->ssid.ssid_len &&
|
|
os_memcmp(pos + 2, hapd->conf->ssid.ssid, pos[1]) == 0)
|
|
return EXACT_SSID_MATCH;
|
|
pos += 2 + pos[1];
|
|
}
|
|
|
|
return wildcard ? WILDCARD_SSID_MATCH : NO_SSID_MATCH;
|
|
}
|
|
|
|
|
|
void handle_probe_req(struct hostapd_data *hapd,
|
|
const struct ieee80211_mgmt *mgmt, size_t len,
|
|
int ssi_signal)
|
|
{
|
|
u8 *resp;
|
|
struct ieee802_11_elems elems;
|
|
const u8 *ie;
|
|
size_t ie_len;
|
|
size_t i, resp_len;
|
|
int noack;
|
|
enum ssid_match_result res;
|
|
|
|
ie = mgmt->u.probe_req.variable;
|
|
if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.probe_req))
|
|
return;
|
|
ie_len = len - (IEEE80211_HDRLEN + sizeof(mgmt->u.probe_req));
|
|
|
|
for (i = 0; hapd->probereq_cb && i < hapd->num_probereq_cb; i++)
|
|
if (hapd->probereq_cb[i].cb(hapd->probereq_cb[i].ctx,
|
|
mgmt->sa, mgmt->da, mgmt->bssid,
|
|
ie, ie_len, ssi_signal) > 0)
|
|
return;
|
|
|
|
if (!hapd->iconf->send_probe_response)
|
|
return;
|
|
|
|
if (ieee802_11_parse_elems(ie, ie_len, &elems, 0) == ParseFailed) {
|
|
wpa_printf(MSG_DEBUG, "Could not parse ProbeReq from " MACSTR,
|
|
MAC2STR(mgmt->sa));
|
|
return;
|
|
}
|
|
|
|
if ((!elems.ssid || !elems.supp_rates)) {
|
|
wpa_printf(MSG_DEBUG, "STA " MACSTR " sent probe request "
|
|
"without SSID or supported rates element",
|
|
MAC2STR(mgmt->sa));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* No need to reply if the Probe Request frame was sent on an adjacent
|
|
* channel. IEEE Std 802.11-2012 describes this as a requirement for an
|
|
* AP with dot11RadioMeasurementActivated set to true, but strictly
|
|
* speaking does not allow such ignoring of Probe Request frames if
|
|
* dot11RadioMeasurementActivated is false. Anyway, this can help reduce
|
|
* number of unnecessary Probe Response frames for cases where the STA
|
|
* is less likely to see them (Probe Request frame sent on a
|
|
* neighboring, but partially overlapping, channel).
|
|
*/
|
|
if (elems.ds_params &&
|
|
hapd->iface->current_mode &&
|
|
(hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G ||
|
|
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211B) &&
|
|
hapd->iconf->channel != elems.ds_params[0]) {
|
|
wpa_printf(MSG_DEBUG,
|
|
"Ignore Probe Request due to DS Params mismatch: chan=%u != ds.chan=%u",
|
|
hapd->iconf->channel, elems.ds_params[0]);
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_P2P
|
|
if (hapd->p2p && elems.wps_ie) {
|
|
struct wpabuf *wps;
|
|
wps = ieee802_11_vendor_ie_concat(ie, ie_len, WPS_DEV_OUI_WFA);
|
|
if (wps && !p2p_group_match_dev_type(hapd->p2p_group, wps)) {
|
|
wpa_printf(MSG_MSGDUMP, "P2P: Ignore Probe Request "
|
|
"due to mismatch with Requested Device "
|
|
"Type");
|
|
wpabuf_free(wps);
|
|
return;
|
|
}
|
|
wpabuf_free(wps);
|
|
}
|
|
|
|
if (hapd->p2p && elems.p2p) {
|
|
struct wpabuf *p2p;
|
|
p2p = ieee802_11_vendor_ie_concat(ie, ie_len, P2P_IE_VENDOR_TYPE);
|
|
if (p2p && !p2p_group_match_dev_id(hapd->p2p_group, p2p)) {
|
|
wpa_printf(MSG_MSGDUMP, "P2P: Ignore Probe Request "
|
|
"due to mismatch with Device ID");
|
|
wpabuf_free(p2p);
|
|
return;
|
|
}
|
|
wpabuf_free(p2p);
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
|
|
if (hapd->conf->ignore_broadcast_ssid && elems.ssid_len == 0 &&
|
|
elems.ssid_list_len == 0) {
|
|
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " for "
|
|
"broadcast SSID ignored", MAC2STR(mgmt->sa));
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_P2P
|
|
if ((hapd->conf->p2p & P2P_GROUP_OWNER) &&
|
|
elems.ssid_len == P2P_WILDCARD_SSID_LEN &&
|
|
os_memcmp(elems.ssid, P2P_WILDCARD_SSID,
|
|
P2P_WILDCARD_SSID_LEN) == 0) {
|
|
/* Process P2P Wildcard SSID like Wildcard SSID */
|
|
elems.ssid_len = 0;
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
|
|
res = ssid_match(hapd, elems.ssid, elems.ssid_len,
|
|
elems.ssid_list, elems.ssid_list_len);
|
|
if (res == NO_SSID_MATCH) {
|
|
if (!(mgmt->da[0] & 0x01)) {
|
|
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
|
|
" for foreign SSID '%s' (DA " MACSTR ")%s",
|
|
MAC2STR(mgmt->sa),
|
|
wpa_ssid_txt(elems.ssid, elems.ssid_len),
|
|
MAC2STR(mgmt->da),
|
|
elems.ssid_list ? " (SSID list)" : "");
|
|
}
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_INTERWORKING
|
|
if (hapd->conf->interworking &&
|
|
elems.interworking && elems.interworking_len >= 1) {
|
|
u8 ant = elems.interworking[0] & 0x0f;
|
|
if (ant != INTERWORKING_ANT_WILDCARD &&
|
|
ant != hapd->conf->access_network_type) {
|
|
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
|
|
" for mismatching ANT %u ignored",
|
|
MAC2STR(mgmt->sa), ant);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (hapd->conf->interworking && elems.interworking &&
|
|
(elems.interworking_len == 7 || elems.interworking_len == 9)) {
|
|
const u8 *hessid;
|
|
if (elems.interworking_len == 7)
|
|
hessid = elems.interworking + 1;
|
|
else
|
|
hessid = elems.interworking + 1 + 2;
|
|
if (!is_broadcast_ether_addr(hessid) &&
|
|
os_memcmp(hessid, hapd->conf->hessid, ETH_ALEN) != 0) {
|
|
wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR
|
|
" for mismatching HESSID " MACSTR
|
|
" ignored",
|
|
MAC2STR(mgmt->sa), MAC2STR(hessid));
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_INTERWORKING */
|
|
|
|
#ifdef CONFIG_P2P
|
|
if ((hapd->conf->p2p & P2P_GROUP_OWNER) &&
|
|
supp_rates_11b_only(&elems)) {
|
|
/* Indicates support for 11b rates only */
|
|
wpa_printf(MSG_EXCESSIVE, "P2P: Ignore Probe Request from "
|
|
MACSTR " with only 802.11b rates",
|
|
MAC2STR(mgmt->sa));
|
|
return;
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
|
|
/* TODO: verify that supp_rates contains at least one matching rate
|
|
* with AP configuration */
|
|
|
|
#ifdef CONFIG_TESTING_OPTIONS
|
|
if (hapd->iconf->ignore_probe_probability > 0.0 &&
|
|
drand48() < hapd->iconf->ignore_probe_probability) {
|
|
wpa_printf(MSG_INFO,
|
|
"TESTING: ignoring probe request from " MACSTR,
|
|
MAC2STR(mgmt->sa));
|
|
return;
|
|
}
|
|
#endif /* CONFIG_TESTING_OPTIONS */
|
|
|
|
resp = hostapd_gen_probe_resp(hapd, mgmt, elems.p2p != NULL,
|
|
&resp_len);
|
|
if (resp == NULL)
|
|
return;
|
|
|
|
/*
|
|
* If this is a broadcast probe request, apply no ack policy to avoid
|
|
* excessive retries.
|
|
*/
|
|
noack = !!(res == WILDCARD_SSID_MATCH &&
|
|
is_broadcast_ether_addr(mgmt->da));
|
|
|
|
if (hostapd_drv_send_mlme(hapd, resp, resp_len, noack) < 0)
|
|
wpa_printf(MSG_INFO, "handle_probe_req: send failed");
|
|
|
|
os_free(resp);
|
|
|
|
wpa_printf(MSG_EXCESSIVE, "STA " MACSTR " sent probe request for %s "
|
|
"SSID", MAC2STR(mgmt->sa),
|
|
elems.ssid_len == 0 ? "broadcast" : "our");
|
|
}
|
|
|
|
|
|
static u8 * hostapd_probe_resp_offloads(struct hostapd_data *hapd,
|
|
size_t *resp_len)
|
|
{
|
|
/* check probe response offloading caps and print warnings */
|
|
if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD))
|
|
return NULL;
|
|
|
|
#ifdef CONFIG_WPS
|
|
if (hapd->conf->wps_state && hapd->wps_probe_resp_ie &&
|
|
(!(hapd->iface->probe_resp_offloads &
|
|
(WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS |
|
|
WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2))))
|
|
wpa_printf(MSG_WARNING, "Device is trying to offload WPS "
|
|
"Probe Response while not supporting this");
|
|
#endif /* CONFIG_WPS */
|
|
|
|
#ifdef CONFIG_P2P
|
|
if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_probe_resp_ie &&
|
|
!(hapd->iface->probe_resp_offloads &
|
|
WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P))
|
|
wpa_printf(MSG_WARNING, "Device is trying to offload P2P "
|
|
"Probe Response while not supporting this");
|
|
#endif /* CONFIG_P2P */
|
|
|
|
if (hapd->conf->interworking &&
|
|
!(hapd->iface->probe_resp_offloads &
|
|
WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING))
|
|
wpa_printf(MSG_WARNING, "Device is trying to offload "
|
|
"Interworking Probe Response while not supporting "
|
|
"this");
|
|
|
|
/* Generate a Probe Response template for the non-P2P case */
|
|
return hostapd_gen_probe_resp(hapd, NULL, 0, resp_len);
|
|
}
|
|
|
|
#endif /* NEED_AP_MLME */
|
|
|
|
|
|
int ieee802_11_build_ap_params(struct hostapd_data *hapd,
|
|
struct wpa_driver_ap_params *params)
|
|
{
|
|
struct ieee80211_mgmt *head = NULL;
|
|
u8 *tail = NULL;
|
|
size_t head_len = 0, tail_len = 0;
|
|
u8 *resp = NULL;
|
|
size_t resp_len = 0;
|
|
#ifdef NEED_AP_MLME
|
|
u16 capab_info;
|
|
u8 *pos, *tailpos;
|
|
|
|
#define BEACON_HEAD_BUF_SIZE 256
|
|
#define BEACON_TAIL_BUF_SIZE 512
|
|
head = os_zalloc(BEACON_HEAD_BUF_SIZE);
|
|
tail_len = BEACON_TAIL_BUF_SIZE;
|
|
#ifdef CONFIG_WPS
|
|
if (hapd->conf->wps_state && hapd->wps_beacon_ie)
|
|
tail_len += wpabuf_len(hapd->wps_beacon_ie);
|
|
#endif /* CONFIG_WPS */
|
|
#ifdef CONFIG_P2P
|
|
if (hapd->p2p_beacon_ie)
|
|
tail_len += wpabuf_len(hapd->p2p_beacon_ie);
|
|
#endif /* CONFIG_P2P */
|
|
if (hapd->conf->vendor_elements)
|
|
tail_len += wpabuf_len(hapd->conf->vendor_elements);
|
|
|
|
#ifdef CONFIG_IEEE80211AC
|
|
if (hapd->conf->vendor_vht) {
|
|
tail_len += 5 + 2 + sizeof(struct ieee80211_vht_capabilities) +
|
|
2 + sizeof(struct ieee80211_vht_operation);
|
|
}
|
|
#endif /* CONFIG_IEEE80211AC */
|
|
|
|
tailpos = tail = os_malloc(tail_len);
|
|
if (head == NULL || tail == NULL) {
|
|
wpa_printf(MSG_ERROR, "Failed to set beacon data");
|
|
os_free(head);
|
|
os_free(tail);
|
|
return -1;
|
|
}
|
|
|
|
head->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
|
|
WLAN_FC_STYPE_BEACON);
|
|
head->duration = host_to_le16(0);
|
|
os_memset(head->da, 0xff, ETH_ALEN);
|
|
|
|
os_memcpy(head->sa, hapd->own_addr, ETH_ALEN);
|
|
os_memcpy(head->bssid, hapd->own_addr, ETH_ALEN);
|
|
head->u.beacon.beacon_int =
|
|
host_to_le16(hapd->iconf->beacon_int);
|
|
|
|
/* hardware or low-level driver will setup seq_ctrl and timestamp */
|
|
capab_info = hostapd_own_capab_info(hapd);
|
|
head->u.beacon.capab_info = host_to_le16(capab_info);
|
|
pos = &head->u.beacon.variable[0];
|
|
|
|
/* SSID */
|
|
*pos++ = WLAN_EID_SSID;
|
|
if (hapd->conf->ignore_broadcast_ssid == 2) {
|
|
/* clear the data, but keep the correct length of the SSID */
|
|
*pos++ = hapd->conf->ssid.ssid_len;
|
|
os_memset(pos, 0, hapd->conf->ssid.ssid_len);
|
|
pos += hapd->conf->ssid.ssid_len;
|
|
} else if (hapd->conf->ignore_broadcast_ssid) {
|
|
*pos++ = 0; /* empty SSID */
|
|
} else {
|
|
*pos++ = hapd->conf->ssid.ssid_len;
|
|
os_memcpy(pos, hapd->conf->ssid.ssid,
|
|
hapd->conf->ssid.ssid_len);
|
|
pos += hapd->conf->ssid.ssid_len;
|
|
}
|
|
|
|
/* Supported rates */
|
|
pos = hostapd_eid_supp_rates(hapd, pos);
|
|
|
|
/* DS Params */
|
|
pos = hostapd_eid_ds_params(hapd, pos);
|
|
|
|
head_len = pos - (u8 *) head;
|
|
|
|
tailpos = hostapd_eid_country(hapd, tailpos,
|
|
tail + BEACON_TAIL_BUF_SIZE - tailpos);
|
|
|
|
/* Power Constraint element */
|
|
tailpos = hostapd_eid_pwr_constraint(hapd, tailpos);
|
|
|
|
/* ERP Information element */
|
|
tailpos = hostapd_eid_erp_info(hapd, tailpos);
|
|
|
|
/* Extended supported rates */
|
|
tailpos = hostapd_eid_ext_supp_rates(hapd, tailpos);
|
|
|
|
/* RSN, MDIE, WPA */
|
|
tailpos = hostapd_eid_wpa(hapd, tailpos, tail + BEACON_TAIL_BUF_SIZE -
|
|
tailpos);
|
|
|
|
tailpos = hostapd_eid_rm_enabled_capab(hapd, tailpos,
|
|
tail + BEACON_TAIL_BUF_SIZE -
|
|
tailpos);
|
|
|
|
tailpos = hostapd_eid_bss_load(hapd, tailpos,
|
|
tail + BEACON_TAIL_BUF_SIZE - tailpos);
|
|
|
|
#ifdef CONFIG_IEEE80211N
|
|
tailpos = hostapd_eid_ht_capabilities(hapd, tailpos);
|
|
tailpos = hostapd_eid_ht_operation(hapd, tailpos);
|
|
#endif /* CONFIG_IEEE80211N */
|
|
|
|
tailpos = hostapd_eid_ext_capab(hapd, tailpos);
|
|
|
|
/*
|
|
* TODO: Time Advertisement element should only be included in some
|
|
* DTIM Beacon frames.
|
|
*/
|
|
tailpos = hostapd_eid_time_adv(hapd, tailpos);
|
|
|
|
tailpos = hostapd_eid_interworking(hapd, tailpos);
|
|
tailpos = hostapd_eid_adv_proto(hapd, tailpos);
|
|
tailpos = hostapd_eid_roaming_consortium(hapd, tailpos);
|
|
tailpos = hostapd_add_csa_elems(hapd, tailpos, tail,
|
|
&hapd->cs_c_off_beacon);
|
|
#ifdef CONFIG_IEEE80211AC
|
|
if (hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac) {
|
|
tailpos = hostapd_eid_vht_capabilities(hapd, tailpos);
|
|
tailpos = hostapd_eid_vht_operation(hapd, tailpos);
|
|
}
|
|
if (hapd->conf->vendor_vht)
|
|
tailpos = hostapd_eid_vendor_vht(hapd, tailpos);
|
|
#endif /* CONFIG_IEEE80211AC */
|
|
|
|
/* Wi-Fi Alliance WMM */
|
|
tailpos = hostapd_eid_wmm(hapd, tailpos);
|
|
|
|
#ifdef CONFIG_WPS
|
|
if (hapd->conf->wps_state && hapd->wps_beacon_ie) {
|
|
os_memcpy(tailpos, wpabuf_head(hapd->wps_beacon_ie),
|
|
wpabuf_len(hapd->wps_beacon_ie));
|
|
tailpos += wpabuf_len(hapd->wps_beacon_ie);
|
|
}
|
|
#endif /* CONFIG_WPS */
|
|
|
|
#ifdef CONFIG_P2P
|
|
if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_beacon_ie) {
|
|
os_memcpy(tailpos, wpabuf_head(hapd->p2p_beacon_ie),
|
|
wpabuf_len(hapd->p2p_beacon_ie));
|
|
tailpos += wpabuf_len(hapd->p2p_beacon_ie);
|
|
}
|
|
#endif /* CONFIG_P2P */
|
|
#ifdef CONFIG_P2P_MANAGER
|
|
if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
|
|
P2P_MANAGE)
|
|
tailpos = hostapd_eid_p2p_manage(hapd, tailpos);
|
|
#endif /* CONFIG_P2P_MANAGER */
|
|
|
|
#ifdef CONFIG_HS20
|
|
tailpos = hostapd_eid_hs20_indication(hapd, tailpos);
|
|
tailpos = hostapd_eid_osen(hapd, tailpos);
|
|
#endif /* CONFIG_HS20 */
|
|
|
|
if (hapd->conf->vendor_elements) {
|
|
os_memcpy(tailpos, wpabuf_head(hapd->conf->vendor_elements),
|
|
wpabuf_len(hapd->conf->vendor_elements));
|
|
tailpos += wpabuf_len(hapd->conf->vendor_elements);
|
|
}
|
|
|
|
tail_len = tailpos > tail ? tailpos - tail : 0;
|
|
|
|
resp = hostapd_probe_resp_offloads(hapd, &resp_len);
|
|
#endif /* NEED_AP_MLME */
|
|
|
|
os_memset(params, 0, sizeof(*params));
|
|
params->head = (u8 *) head;
|
|
params->head_len = head_len;
|
|
params->tail = tail;
|
|
params->tail_len = tail_len;
|
|
params->proberesp = resp;
|
|
params->proberesp_len = resp_len;
|
|
params->dtim_period = hapd->conf->dtim_period;
|
|
params->beacon_int = hapd->iconf->beacon_int;
|
|
params->basic_rates = hapd->iface->basic_rates;
|
|
params->ssid = hapd->conf->ssid.ssid;
|
|
params->ssid_len = hapd->conf->ssid.ssid_len;
|
|
if ((hapd->conf->wpa & (WPA_PROTO_WPA | WPA_PROTO_RSN)) ==
|
|
(WPA_PROTO_WPA | WPA_PROTO_RSN))
|
|
params->pairwise_ciphers = hapd->conf->wpa_pairwise |
|
|
hapd->conf->rsn_pairwise;
|
|
else if (hapd->conf->wpa & WPA_PROTO_RSN)
|
|
params->pairwise_ciphers = hapd->conf->rsn_pairwise;
|
|
else if (hapd->conf->wpa & WPA_PROTO_WPA)
|
|
params->pairwise_ciphers = hapd->conf->wpa_pairwise;
|
|
params->group_cipher = hapd->conf->wpa_group;
|
|
params->key_mgmt_suites = hapd->conf->wpa_key_mgmt;
|
|
params->auth_algs = hapd->conf->auth_algs;
|
|
params->wpa_version = hapd->conf->wpa;
|
|
params->privacy = hapd->conf->ssid.wep.keys_set || hapd->conf->wpa ||
|
|
(hapd->conf->ieee802_1x &&
|
|
(hapd->conf->default_wep_key_len ||
|
|
hapd->conf->individual_wep_key_len));
|
|
switch (hapd->conf->ignore_broadcast_ssid) {
|
|
case 0:
|
|
params->hide_ssid = NO_SSID_HIDING;
|
|
break;
|
|
case 1:
|
|
params->hide_ssid = HIDDEN_SSID_ZERO_LEN;
|
|
break;
|
|
case 2:
|
|
params->hide_ssid = HIDDEN_SSID_ZERO_CONTENTS;
|
|
break;
|
|
}
|
|
params->isolate = hapd->conf->isolate;
|
|
params->smps_mode = hapd->iconf->ht_capab & HT_CAP_INFO_SMPS_MASK;
|
|
#ifdef NEED_AP_MLME
|
|
params->cts_protect = !!(ieee802_11_erp_info(hapd) &
|
|
ERP_INFO_USE_PROTECTION);
|
|
params->preamble = hapd->iface->num_sta_no_short_preamble == 0 &&
|
|
hapd->iconf->preamble == SHORT_PREAMBLE;
|
|
if (hapd->iface->current_mode &&
|
|
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G)
|
|
params->short_slot_time =
|
|
hapd->iface->num_sta_no_short_slot_time > 0 ? 0 : 1;
|
|
else
|
|
params->short_slot_time = -1;
|
|
if (!hapd->iconf->ieee80211n || hapd->conf->disable_11n)
|
|
params->ht_opmode = -1;
|
|
else
|
|
params->ht_opmode = hapd->iface->ht_op_mode;
|
|
#endif /* NEED_AP_MLME */
|
|
params->interworking = hapd->conf->interworking;
|
|
if (hapd->conf->interworking &&
|
|
!is_zero_ether_addr(hapd->conf->hessid))
|
|
params->hessid = hapd->conf->hessid;
|
|
params->access_network_type = hapd->conf->access_network_type;
|
|
params->ap_max_inactivity = hapd->conf->ap_max_inactivity;
|
|
#ifdef CONFIG_P2P
|
|
params->p2p_go_ctwindow = hapd->iconf->p2p_go_ctwindow;
|
|
#endif /* CONFIG_P2P */
|
|
#ifdef CONFIG_HS20
|
|
params->disable_dgaf = hapd->conf->disable_dgaf;
|
|
if (hapd->conf->osen) {
|
|
params->privacy = 1;
|
|
params->osen = 1;
|
|
}
|
|
#endif /* CONFIG_HS20 */
|
|
return 0;
|
|
}
|
|
|
|
|
|
void ieee802_11_free_ap_params(struct wpa_driver_ap_params *params)
|
|
{
|
|
os_free(params->tail);
|
|
params->tail = NULL;
|
|
os_free(params->head);
|
|
params->head = NULL;
|
|
os_free(params->proberesp);
|
|
params->proberesp = NULL;
|
|
}
|
|
|
|
|
|
int ieee802_11_set_beacon(struct hostapd_data *hapd)
|
|
{
|
|
struct wpa_driver_ap_params params;
|
|
struct hostapd_freq_params freq;
|
|
struct hostapd_iface *iface = hapd->iface;
|
|
struct hostapd_config *iconf = iface->conf;
|
|
struct wpabuf *beacon, *proberesp, *assocresp;
|
|
int res, ret = -1;
|
|
|
|
if (hapd->csa_in_progress) {
|
|
wpa_printf(MSG_ERROR, "Cannot set beacons during CSA period");
|
|
return -1;
|
|
}
|
|
|
|
hapd->beacon_set_done = 1;
|
|
|
|
if (ieee802_11_build_ap_params(hapd, ¶ms) < 0)
|
|
return -1;
|
|
|
|
if (hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp) <
|
|
0)
|
|
goto fail;
|
|
|
|
params.beacon_ies = beacon;
|
|
params.proberesp_ies = proberesp;
|
|
params.assocresp_ies = assocresp;
|
|
params.reenable = hapd->reenable_beacon;
|
|
hapd->reenable_beacon = 0;
|
|
|
|
if (iface->current_mode &&
|
|
hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
|
|
iconf->channel, iconf->ieee80211n,
|
|
iconf->ieee80211ac,
|
|
iconf->secondary_channel,
|
|
iconf->vht_oper_chwidth,
|
|
iconf->vht_oper_centr_freq_seg0_idx,
|
|
iconf->vht_oper_centr_freq_seg1_idx,
|
|
iface->current_mode->vht_capab) == 0)
|
|
params.freq = &freq;
|
|
|
|
res = hostapd_drv_set_ap(hapd, ¶ms);
|
|
hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);
|
|
if (res)
|
|
wpa_printf(MSG_ERROR, "Failed to set beacon parameters");
|
|
else
|
|
ret = 0;
|
|
fail:
|
|
ieee802_11_free_ap_params(¶ms);
|
|
return ret;
|
|
}
|
|
|
|
|
|
int ieee802_11_set_beacons(struct hostapd_iface *iface)
|
|
{
|
|
size_t i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < iface->num_bss; i++) {
|
|
if (iface->bss[i]->started &&
|
|
ieee802_11_set_beacon(iface->bss[i]) < 0)
|
|
ret = -1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* only update beacons if started */
|
|
int ieee802_11_update_beacons(struct hostapd_iface *iface)
|
|
{
|
|
size_t i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < iface->num_bss; i++) {
|
|
if (iface->bss[i]->beacon_set_done && iface->bss[i]->started &&
|
|
ieee802_11_set_beacon(iface->bss[i]) < 0)
|
|
ret = -1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif /* CONFIG_NATIVE_WINDOWS */
|