# hostapd authentication server tests # Copyright (c) 2017, Jouni Malinen # # This software may be distributed under the terms of the BSD license. # See README for more details. import hostapd from utils import alloc_fail, fail_test, wait_fail_trigger def authsrv_params(): params = {"ssid": "as", "beacon_int": "2000", "radius_server_clients": "auth_serv/radius_clients.conf", "radius_server_auth_port": '18128', "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf", "eap_sim_db": "unix:/tmp/hlr_auc_gw.sock", "ca_cert": "auth_serv/ca.pem", "server_cert": "auth_serv/server.pem", "private_key": "auth_serv/server.key", "eap_message": "hello"} return params def test_authsrv_oom(dev, apdev): """Authentication server OOM""" params = authsrv_params() authsrv = hostapd.add_ap(apdev[1], params) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "18128" hapd = hostapd.add_ap(apdev[0], params) dev[0].scan_for_bss(hapd.own_addr(), 2412) with alloc_fail(authsrv, 1, "hostapd_radius_get_eap_user"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10) if ev is None: raise Exception("EAP failure not reported") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() with alloc_fail(authsrv, 1, "srv_log"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", scan_freq="2412") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() with alloc_fail(authsrv, 1, "radius_server_new_session"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") dev[0].wait_disconnected() dev[0].request("REMOVE_NETWORK all") dev[0].dump_monitor() for count in range(1, 3): with alloc_fail(authsrv, count, "=radius_server_get_new_session"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") dev[0].wait_disconnected() dev[0].request("REMOVE_NETWORK all") dev[0].dump_monitor() with alloc_fail(authsrv, 1, "eap_server_sm_init"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") dev[0].wait_disconnected() dev[0].request("REMOVE_NETWORK all") dev[0].dump_monitor() tests = ["radius_server_encapsulate_eap", "radius_server_receive_auth"] for t in tests: with alloc_fail(authsrv, 1, t): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") wait_fail_trigger(authsrv, "GET_ALLOC_FAIL") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() tests = ["radius_msg_add_attr;radius_server_encapsulate_eap", "radius_msg_add_eap;radius_server_encapsulate_eap", "radius_msg_finish_srv;radius_server_encapsulate_eap"] for t in tests: with fail_test(authsrv, 1, t): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") wait_fail_trigger(authsrv, "GET_FAIL") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() with alloc_fail(authsrv, 1, "radius_server_get_new_session"): with fail_test(authsrv, 1, "radius_msg_add_eap;radius_server_reject"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") wait_fail_trigger(authsrv, "GET_FAIL") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() with alloc_fail(authsrv, 1, "radius_server_get_new_session"): with fail_test(authsrv, 1, "radius_msg_finish_srv;radius_server_reject"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") wait_fail_trigger(authsrv, "GET_FAIL") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() authsrv.disable() with alloc_fail(authsrv, 1, "radius_server_init;hostapd_setup_radius_srv"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") with alloc_fail(authsrv, 2, "radius_server_init;hostapd_setup_radius_srv"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") with alloc_fail(authsrv, 3, "radius_server_init;hostapd_setup_radius_srv"): authsrv.request("ENABLE") # This is actually allowed to continue even though memory allocation # fails. authsrv.disable() for count in range(1, 4): with alloc_fail(authsrv, count, "radius_server_read_clients;radius_server_init;hostapd_setup_radius_srv"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") with alloc_fail(authsrv, 1, "eloop_sock_table_add_sock;radius_server_init;hostapd_setup_radius_srv"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") with alloc_fail(authsrv, 1, "tls_init;authsrv_init"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") for count in range(1, 3): with alloc_fail(authsrv, count, "eap_sim_db_init;authsrv_init"): if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded during OOM") def test_authsrv_errors_1(dev, apdev): """Authentication server errors (1)""" params = authsrv_params() params["eap_user_file"] = "sqlite:auth_serv/does-not-exist/does-not-exist" authsrv = hostapd.add_ap(apdev[1], params, no_enable=True) if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded with invalid SQLite EAP user file") def test_authsrv_errors_2(dev, apdev): """Authentication server errors (2)""" params = authsrv_params() params["radius_server_clients"] = "auth_serv/does-not-exist" authsrv = hostapd.add_ap(apdev[1], params, no_enable=True) if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded with invalid RADIUS client file") def test_authsrv_errors_3(dev, apdev): """Authentication server errors (3)""" params = authsrv_params() params["eap_sim_db"] = "unix:/tmp/hlr_auc_gw.sock db=auth_serv/does-not-exist/does-not-exist" authsrv = hostapd.add_ap(apdev[1], params, no_enable=True) if "FAIL" not in authsrv.request("ENABLE"): raise Exception("ENABLE succeeded with invalid RADIUS client file") def test_authsrv_testing_options(dev, apdev): """Authentication server and testing options""" params = authsrv_params() authsrv = hostapd.add_ap(apdev[1], params) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "18128" hapd = hostapd.add_ap(apdev[0], params) dev[0].scan_for_bss(hapd.own_addr(), 2412) # The first two would be fine to run with any server build; the rest are # actually supposed to fail, but they don't fail when using a server build # that does not support the TLS protocol tests. tests = ["foo@test-unknown", "foo@test-tls-unknown", "foo@test-tls-1", "foo@test-tls-2", "foo@test-tls-3", "foo@test-tls-4", "foo@test-tls-5", "foo@test-tls-6", "foo@test-tls-7", "foo@test-tls-8"] for t in tests: dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity=t, password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", scan_freq="2412") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() def test_authsrv_unknown_user(dev, apdev): """Authentication server and unknown user""" params = authsrv_params() params["eap_user_file"] = "auth_serv/eap_user_vlan.conf" authsrv = hostapd.add_ap(apdev[1], params) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "18128" hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") dev[0].wait_disconnected() dev[0].request("REMOVE_NETWORK all") def test_authsrv_unknown_client(dev, apdev): """Authentication server and unknown user""" params = authsrv_params() params["radius_server_clients"] = "auth_serv/radius_clients_none.conf" authsrv = hostapd.add_ap(apdev[1], params) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "18128" hapd = hostapd.add_ap(apdev[0], params) # RADIUS SRV: Unknown client 127.0.0.1 - packet ignored dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("EAP not started") dev[0].request("REMOVE_NETWORK all")