# Scanning tests # Copyright (c) 2013-2016, Jouni Malinen # # This software may be distributed under the terms of the BSD license. # See README for more details. from remotehost import remote_compatible import binascii import time import logging logger = logging.getLogger() import os import struct import subprocess import hostapd from wpasupplicant import WpaSupplicant from utils import HwsimSkip, fail_test, alloc_fail, wait_fail_trigger, parse_ie from tshark import run_tshark from test_ap_csa import switch_channel, wait_channel_switch, csa_supported def check_scan(dev, params, other_started=False, test_busy=False): if not other_started: dev.dump_monitor() id = dev.request("SCAN " + params) if "FAIL" in id: raise Exception("Failed to start scan") id = int(id) if test_busy: if "FAIL-BUSY" not in dev.request("SCAN"): raise Exception("SCAN command while already scanning not rejected") if other_started: ev = dev.wait_event(["CTRL-EVENT-SCAN-STARTED"]) if ev is None: raise Exception("Other scan did not start") if "id=" + str(id) in ev: raise Exception("Own scan id unexpectedly included in start event") ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Other scan did not complete") if "id=" + str(id) in ev: raise Exception("Own scan id unexpectedly included in completed event") ev = dev.wait_event(["CTRL-EVENT-SCAN-STARTED"]) if ev is None: raise Exception("Scan did not start") if "id=" + str(id) not in ev: raise Exception("Scan id not included in start event") if test_busy: if "FAIL-BUSY" not in dev.request("SCAN"): raise Exception("SCAN command while already scanning not rejected") ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") if "id=" + str(id) not in ev: raise Exception("Scan id not included in completed event") def check_scan_retry(dev, params, bssid): for i in range(0, 5): check_scan(dev, "freq=2412-2462,5180 use_id=1") if int(dev.get_bss(bssid)['age']) <= 1: return raise Exception("Unexpectedly old BSS entry") @remote_compatible def test_scan(dev, apdev): """Control interface behavior on scan parameters""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] logger.info("Full scan") check_scan(dev[0], "use_id=1", test_busy=True) logger.info("Limited channel scan") check_scan_retry(dev[0], "freq=2412-2462,5180 use_id=1", bssid) # wait long enough to allow next scans to be verified not to find the AP time.sleep(2) logger.info("Passive single-channel scan") check_scan(dev[0], "freq=2457 passive=1 use_id=1") logger.info("Active single-channel scan") check_scan(dev[0], "freq=2452 passive=0 use_id=1") if int(dev[0].get_bss(bssid)['age']) < 2: raise Exception("Unexpectedly updated BSS entry") logger.info("Active single-channel scan on AP's operating channel") check_scan_retry(dev[0], "freq=2412 passive=0 use_id=1", bssid) @remote_compatible def test_scan_tsf(dev, apdev): """Scan and TSF updates from Beacon/Probe Response frames""" hostapd.add_ap(apdev[0], {"ssid": "test-scan", 'beacon_int': "100"}) bssid = apdev[0]['bssid'] tsf = [] for passive in [1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1]: check_scan(dev[0], "freq=2412 passive=%d use_id=1" % passive) bss = dev[0].get_bss(bssid) if bss: tsf.append(int(bss['tsf'])) logger.info("TSF: " + bss['tsf']) if tsf[-3] <= tsf[-4]: # For now, only write this in the log without failing the test case # since mac80211_hwsim does not yet update the Timestamp field in # Probe Response frames. logger.info("Probe Response did not update TSF") #raise Exception("Probe Response did not update TSF") if tsf[-1] <= tsf[-3]: raise Exception("Beacon did not update TSF") if 0 in tsf: raise Exception("0 TSF reported") @remote_compatible def test_scan_only(dev, apdev): """Control interface behavior on scan parameters with type=only""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] logger.info("Full scan") check_scan(dev[0], "type=only use_id=1") logger.info("Limited channel scan") check_scan_retry(dev[0], "type=only freq=2412-2462,5180 use_id=1", bssid) # wait long enough to allow next scans to be verified not to find the AP time.sleep(2) logger.info("Passive single-channel scan") check_scan(dev[0], "type=only freq=2457 passive=1 use_id=1") logger.info("Active single-channel scan") check_scan(dev[0], "type=only freq=2452 passive=0 use_id=1") if int(dev[0].get_bss(bssid)['age']) < 2: raise Exception("Unexpectedly updated BSS entry") logger.info("Active single-channel scan on AP's operating channel") check_scan_retry(dev[0], "type=only freq=2412 passive=0 use_id=1", bssid) @remote_compatible def test_scan_external_trigger(dev, apdev): """Avoid operations during externally triggered scan""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger']) check_scan(dev[0], "use_id=1", other_started=True) def test_scan_bss_expiration_count(dev, apdev): """BSS entry expiration based on scan results without match""" if "FAIL" not in dev[0].request("BSS_EXPIRE_COUNT 0"): raise Exception("Invalid BSS_EXPIRE_COUNT accepted") if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 2"): raise Exception("BSS_EXPIRE_COUNT failed") hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] dev[0].scan(freq="2412", only_new=True) if bssid not in dev[0].request("SCAN_RESULTS"): raise Exception("BSS not found in initial scan") hapd.request("DISABLE") dev[0].scan(freq="2412", only_new=True) if bssid not in dev[0].request("SCAN_RESULTS"): raise Exception("BSS not found in first scan without match") dev[0].scan(freq="2412", only_new=True) if bssid in dev[0].request("SCAN_RESULTS"): raise Exception("BSS found after two scans without match") @remote_compatible def test_scan_bss_expiration_age(dev, apdev): """BSS entry expiration based on age""" try: if "FAIL" not in dev[0].request("BSS_EXPIRE_AGE COUNT 9"): raise Exception("Invalid BSS_EXPIRE_AGE accepted") if "OK" not in dev[0].request("BSS_EXPIRE_AGE 10"): raise Exception("BSS_EXPIRE_AGE failed") hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] # Allow couple more retries to avoid reporting errors during heavy load for i in range(5): dev[0].scan(freq="2412") if bssid in dev[0].request("SCAN_RESULTS"): break if bssid not in dev[0].request("SCAN_RESULTS"): raise Exception("BSS not found in initial scan") hapd.request("DISABLE") logger.info("Waiting for BSS entry to expire") time.sleep(7) if bssid not in dev[0].request("SCAN_RESULTS"): raise Exception("BSS expired too quickly") ev = dev[0].wait_event(["CTRL-EVENT-BSS-REMOVED"], timeout=15) if ev is None: raise Exception("BSS entry expiration timed out") if bssid in dev[0].request("SCAN_RESULTS"): raise Exception("BSS not removed after expiration time") finally: dev[0].request("BSS_EXPIRE_AGE 180") @remote_compatible def test_scan_filter(dev, apdev): """Filter scan results based on SSID""" try: if "OK" not in dev[0].request("SET filter_ssids 1"): raise Exception("SET failed") id = dev[0].connect("test-scan", key_mgmt="NONE", only_add_network=True) hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] hostapd.add_ap(apdev[1], {"ssid": "test-scan2"}) bssid2 = apdev[1]['bssid'] dev[0].scan(freq="2412", only_new=True) if bssid not in dev[0].request("SCAN_RESULTS"): raise Exception("BSS not found in scan results") if bssid2 in dev[0].request("SCAN_RESULTS"): raise Exception("Unexpected BSS found in scan results") dev[0].set_network_quoted(id, "ssid", "") dev[0].scan(freq="2412") id2 = dev[0].connect("test", key_mgmt="NONE", only_add_network=True) dev[0].scan(freq="2412") finally: dev[0].request("SET filter_ssids 0") @remote_compatible def test_scan_int(dev, apdev): """scan interval configuration""" try: if "FAIL" not in dev[0].request("SCAN_INTERVAL -1"): raise Exception("Accepted invalid scan interval") if "OK" not in dev[0].request("SCAN_INTERVAL 1"): raise Exception("Failed to set scan interval") dev[0].connect("not-used", key_mgmt="NONE", scan_freq="2412", wait_connect=False) times = {} for i in range(0, 3): logger.info("Waiting for scan to start") start = os.times()[4] ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5) if ev is None: raise Exception("did not start a scan") stop = os.times()[4] times[i] = stop - start logger.info("Waiting for scan to complete") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 10) if ev is None: raise Exception("did not complete a scan") logger.info("times=" + str(times)) if times[0] > 1 or times[1] < 0.5 or times[1] > 1.5 or times[2] < 0.5 or times[2] > 1.5: raise Exception("Unexpected scan timing: " + str(times)) finally: dev[0].request("SCAN_INTERVAL 5") def test_scan_bss_operations(dev, apdev): """Control interface behavior on BSS parameters""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] hostapd.add_ap(apdev[1], {"ssid": "test2-scan"}) bssid2 = apdev[1]['bssid'] dev[0].scan(freq="2412") dev[0].scan(freq="2412") dev[0].scan(freq="2412") id1 = dev[0].request("BSS FIRST MASK=0x1").splitlines()[0].split('=')[1] id2 = dev[0].request("BSS LAST MASK=0x1").splitlines()[0].split('=')[1] res = dev[0].request("BSS RANGE=ALL MASK=0x20001") if "id=" + id1 not in res: raise Exception("Missing BSS " + id1) if "id=" + id2 not in res: raise Exception("Missing BSS " + id2) if "====" not in res: raise Exception("Missing delim") if "####" not in res: raise Exception("Missing end") res = dev[0].request("BSS RANGE=ALL MASK=0") if "id=" + id1 not in res: raise Exception("Missing BSS " + id1) if "id=" + id2 not in res: raise Exception("Missing BSS " + id2) if "====" in res: raise Exception("Unexpected delim") if "####" in res: raise Exception("Unexpected end delim") res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines() if len(res) != 2: raise Exception("Unexpected result: " + str(res)) res = dev[0].request("BSS FIRST MASK=0x1") if "id=" + id1 not in res: raise Exception("Unexpected result: " + res) res = dev[0].request("BSS LAST MASK=0x1") if "id=" + id2 not in res: raise Exception("Unexpected result: " + res) res = dev[0].request("BSS ID-" + id1 + " MASK=0x1") if "id=" + id1 not in res: raise Exception("Unexpected result: " + res) res = dev[0].request("BSS NEXT-" + id1 + " MASK=0x1") if "id=" + id2 not in res: raise Exception("Unexpected result: " + res) res = dev[0].request("BSS NEXT-" + id2 + " MASK=0x1") if "id=" in res: raise Exception("Unexpected result: " + res) if len(dev[0].request("BSS RANGE=" + id2 + " MASK=0x1").splitlines()) != 0: raise Exception("Unexpected RANGE=1 result") if len(dev[0].request("BSS RANGE=" + id1 + "- MASK=0x1").splitlines()) != 2: raise Exception("Unexpected RANGE=0- result") if len(dev[0].request("BSS RANGE=-" + id2 + " MASK=0x1").splitlines()) != 2: raise Exception("Unexpected RANGE=-1 result") if len(dev[0].request("BSS RANGE=" + id1 + "-" + id2 + " MASK=0x1").splitlines()) != 2: raise Exception("Unexpected RANGE=0-1 result") if len(dev[0].request("BSS RANGE=" + id2 + "-" + id2 + " MASK=0x1").splitlines()) != 1: raise Exception("Unexpected RANGE=1-1 result") if len(dev[0].request("BSS RANGE=" + str(int(id2) + 1) + "-" + str(int(id2) + 10) + " MASK=0x1").splitlines()) != 0: raise Exception("Unexpected RANGE=2-10 result") if len(dev[0].request("BSS RANGE=0-" + str(int(id2) + 10) + " MASK=0x1").splitlines()) != 2: raise Exception("Unexpected RANGE=0-10 result") if len(dev[0].request("BSS RANGE=" + id1 + "-" + id1 + " MASK=0x1").splitlines()) != 1: raise Exception("Unexpected RANGE=0-0 result") res = dev[0].request("BSS p2p_dev_addr=FOO") if "FAIL" in res or "id=" in res: raise Exception("Unexpected result: " + res) res = dev[0].request("BSS p2p_dev_addr=00:11:22:33:44:55") if "FAIL" in res or "id=" in res: raise Exception("Unexpected result: " + res) dev[0].request("BSS_FLUSH 1000") res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines() if len(res) != 2: raise Exception("Unexpected result after BSS_FLUSH 1000") dev[0].request("BSS_FLUSH 0") res = dev[0].request("BSS RANGE=ALL MASK=0x1").splitlines() if len(res) != 0: raise Exception("Unexpected result after BSS_FLUSH 0") @remote_compatible def test_scan_and_interface_disabled(dev, apdev): """Scan operation when interface gets disabled""" try: dev[0].request("SCAN") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"]) if ev is None: raise Exception("Scan did not start") dev[0].request("DRIVER_EVENT INTERFACE_DISABLED") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=7) if ev is not None: raise Exception("Scan completed unexpectedly") # verify that scan is rejected if "FAIL" not in dev[0].request("SCAN"): raise Exception("New scan request was accepted unexpectedly") dev[0].request("DRIVER_EVENT INTERFACE_ENABLED") dev[0].scan(freq="2412") finally: dev[0].request("DRIVER_EVENT INTERFACE_ENABLED") @remote_compatible def test_scan_for_auth(dev, apdev): """cfg80211 workaround with scan-for-auth""" hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") # Block sme-connect radio work with an external radio work item, so that # SELECT_NETWORK can decide to use fast associate without a new scan while # cfg80211 still has the matching BSS entry, but the actual connection is # not yet started. id = dev[0].request("RADIO_WORK add block-work") ev = dev[0].wait_event(["EXT-RADIO-WORK-START"]) if ev is None: raise Exception("Timeout while waiting radio work to start") dev[0].connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) dev[0].dump_monitor() # Clear cfg80211 BSS table. res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger', 'freq', '2457', 'flush']) if res != 0: raise HwsimSkip("iw scan trigger flush not supported") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5) if ev is None: raise Exception("External flush scan timed out") # Release blocking radio work to allow connection to go through with the # cfg80211 BSS entry missing. dev[0].request("RADIO_WORK done " + id) dev[0].wait_connected(timeout=15) @remote_compatible def test_scan_for_auth_fail(dev, apdev): """cfg80211 workaround with scan-for-auth failing""" hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") # Block sme-connect radio work with an external radio work item, so that # SELECT_NETWORK can decide to use fast associate without a new scan while # cfg80211 still has the matching BSS entry, but the actual connection is # not yet started. id = dev[0].request("RADIO_WORK add block-work") ev = dev[0].wait_event(["EXT-RADIO-WORK-START"]) if ev is None: raise Exception("Timeout while waiting radio work to start") dev[0].connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) dev[0].dump_monitor() hapd.disable() # Clear cfg80211 BSS table. res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger', 'freq', '2457', 'flush']) if res != 0: raise HwsimSkip("iw scan trigger flush not supported") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5) if ev is None: raise Exception("External flush scan timed out") # Release blocking radio work to allow connection to go through with the # cfg80211 BSS entry missing. dev[0].request("RADIO_WORK done " + id) ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS", "CTRL-EVENT-CONNECTED"], 15) if ev is None: raise Exception("Scan event missing") if "CTRL-EVENT-CONNECTED" in ev: raise Exception("Unexpected connection") dev[0].request("DISCONNECT") @remote_compatible def test_scan_for_auth_wep(dev, apdev): """cfg80211 scan-for-auth workaround with WEP keys""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "wep", "wep_key0": '"abcde"', "auth_algs": "2"}) dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") # Block sme-connect radio work with an external radio work item, so that # SELECT_NETWORK can decide to use fast associate without a new scan while # cfg80211 still has the matching BSS entry, but the actual connection is # not yet started. id = dev[0].request("RADIO_WORK add block-work") ev = dev[0].wait_event(["EXT-RADIO-WORK-START"]) if ev is None: raise Exception("Timeout while waiting radio work to start") dev[0].connect("wep", key_mgmt="NONE", wep_key0='"abcde"', auth_alg="SHARED", scan_freq="2412", wait_connect=False) dev[0].dump_monitor() # Clear cfg80211 BSS table. res, data = dev[0].cmd_execute(['iw', dev[0].ifname, 'scan', 'trigger', 'freq', '2457', 'flush']) if res != 0: raise HwsimSkip("iw scan trigger flush not supported") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 5) if ev is None: raise Exception("External flush scan timed out") # Release blocking radio work to allow connection to go through with the # cfg80211 BSS entry missing. dev[0].request("RADIO_WORK done " + id) dev[0].wait_connected(timeout=15) @remote_compatible def test_scan_hidden(dev, apdev): """Control interface behavior on scan parameters""" hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan", "ignore_broadcast_ssid": "1"}) bssid = apdev[0]['bssid'] check_scan(dev[0], "freq=2412 use_id=1") if "test-scan" in dev[0].request("SCAN_RESULTS"): raise Exception("BSS unexpectedly found in initial scan") id1 = dev[0].connect("foo", key_mgmt="NONE", scan_ssid="1", only_add_network=True) id2 = dev[0].connect("test-scan", key_mgmt="NONE", scan_ssid="1", only_add_network=True) id3 = dev[0].connect("bar", key_mgmt="NONE", only_add_network=True) check_scan(dev[0], "freq=2412 use_id=1") if "test-scan" in dev[0].request("SCAN_RESULTS"): raise Exception("BSS unexpectedly found in scan") # Allow multiple attempts to be more robust under heavy CPU load that can # result in Probe Response frames getting sent only after the station has # already stopped waiting for the response on the channel. found = False for i in range(10): check_scan(dev[0], "scan_id=%d,%d,%d freq=2412 use_id=1" % (id1, id2, id3)) if "test-scan" in dev[0].request("SCAN_RESULTS"): found = True break if not found: raise Exception("BSS not found in scan") if "FAIL" not in dev[0].request("SCAN scan_id=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17"): raise Exception("Too many scan_id values accepted") # Duplicate SSID removal check_scan(dev[0], "scan_id=%d,%d,%d freq=2412 use_id=1" % (id1, id1, id2)) dev[0].request("REMOVE_NETWORK all") hapd.disable() dev[0].flush_scan_cache(freq=2432) dev[0].flush_scan_cache() def test_scan_and_bss_entry_removed(dev, apdev): """Last scan result and connect work processing on BSS entry update""" hapd = hostapd.add_ap(apdev[0], {"ssid": "open", "eap_server": "1", "wps_state": "2"}) bssid = apdev[0]['bssid'] wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") # Add a BSS entry dev[0].scan_for_bss(bssid, freq="2412") wpas.scan_for_bss(bssid, freq="2412") # Start a connect radio work with a blocking entry preventing this from # proceeding; this stores a pointer to the selected BSS entry. id = dev[0].request("RADIO_WORK add block-work") w_id = wpas.request("RADIO_WORK add block-work") dev[0].wait_event(["EXT-RADIO-WORK-START"], timeout=1) wpas.wait_event(["EXT-RADIO-WORK-START"], timeout=1) nid = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) w_nid = wpas.connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) time.sleep(0.1) # Remove the BSS entry dev[0].request("BSS_FLUSH 0") wpas.request("BSS_FLUSH 0") # Allow the connect radio work to continue. The bss entry stored in the # pending connect work is now stale. This will result in the connection # attempt failing since the BSS entry does not exist. dev[0].request("RADIO_WORK done " + id) wpas.request("RADIO_WORK done " + w_id) ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1) if ev is not None: raise Exception("Unexpected connection") dev[0].remove_network(nid) ev = wpas.wait_event(["CTRL-EVENT-CONNECTED"], timeout=1) if ev is not None: raise Exception("Unexpected connection") wpas.remove_network(w_nid) time.sleep(0.5) dev[0].request("BSS_FLUSH 0") wpas.request("BSS_FLUSH 0") # Add a BSS entry dev[0].scan_for_bss(bssid, freq="2412") wpas.scan_for_bss(bssid, freq="2412") # Start a connect radio work with a blocking entry preventing this from # proceeding; this stores a pointer to the selected BSS entry. id = dev[0].request("RADIO_WORK add block-work") w_id = wpas.request("RADIO_WORK add block-work") dev[0].wait_event(["EXT-RADIO-WORK-START"], timeout=1) wpas.wait_event(["EXT-RADIO-WORK-START"], timeout=1) # Schedule a connection based on the current BSS entry. dev[0].connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) wpas.connect("open", key_mgmt="NONE", scan_freq="2412", wait_connect=False) # Update scan results with results that have longer set of IEs so that new # memory needs to be allocated for the BSS entry. hapd.request("WPS_PBC") time.sleep(0.1) subprocess.call(['iw', dev[0].ifname, 'scan', 'trigger', 'freq', '2412']) subprocess.call(['iw', wpas.ifname, 'scan', 'trigger', 'freq', '2412']) time.sleep(0.1) # Allow the connect radio work to continue. The bss entry stored in the # pending connect work becomes stale during the scan and it must have been # updated for the connection to work. dev[0].request("RADIO_WORK done " + id) wpas.request("RADIO_WORK done " + w_id) dev[0].wait_connected(timeout=15, error="No connection (sme-connect)") wpas.wait_connected(timeout=15, error="No connection (connect)") dev[0].request("DISCONNECT") wpas.request("DISCONNECT") dev[0].flush_scan_cache() wpas.flush_scan_cache() @remote_compatible def test_scan_reqs_with_non_scan_radio_work(dev, apdev): """SCAN commands while non-scan radio_work is in progress""" id = dev[0].request("RADIO_WORK add test-work-a") ev = dev[0].wait_event(["EXT-RADIO-WORK-START"]) if ev is None: raise Exception("Timeout while waiting radio work to start") if "OK" not in dev[0].request("SCAN"): raise Exception("SCAN failed") if "FAIL-BUSY" not in dev[0].request("SCAN"): raise Exception("SCAN accepted while one is already pending") if "FAIL-BUSY" not in dev[0].request("SCAN"): raise Exception("SCAN accepted while one is already pending") res = dev[0].request("RADIO_WORK show").splitlines() count = 0 for l in res: if "scan" in l: count += 1 if count != 1: logger.info(res) raise Exception("Unexpected number of scan radio work items") dev[0].dump_monitor() dev[0].request("RADIO_WORK done " + id) ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5) if ev is None: raise Exception("Scan did not start") if "FAIL-BUSY" not in dev[0].request("SCAN"): raise Exception("SCAN accepted while one is already in progress") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10) if ev is None: raise Exception("Scan did not complete") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=0.2) if ev is not None: raise Exception("Unexpected scan started") def test_scan_setband(dev, apdev): """Band selection for scan operations""" try: hapd = None hapd2 = None params = {"ssid": "test-setband", "hw_mode": "a", "channel": "36", "country_code": "US"} hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] params = {"ssid": "test-setband", "hw_mode": "g", "channel": "1"} hapd2 = hostapd.add_ap(apdev[1], params) bssid2 = apdev[1]['bssid'] if "FAIL" not in dev[0].request("SET setband FOO"): raise Exception("Invalid set setband accepted") if "OK" not in dev[0].request("SET setband AUTO"): raise Exception("Failed to set setband") if "OK" not in dev[1].request("SET setband 5G"): raise Exception("Failed to set setband") if "OK" not in dev[2].request("SET setband 2G"): raise Exception("Failed to set setband") # Allow a retry to avoid reporting errors during heavy load for j in range(5): for i in range(3): dev[i].request("SCAN only_new=1") for i in range(3): ev = dev[i].wait_event(["CTRL-EVENT-SCAN-RESULTS"], 15) if ev is None: raise Exception("Scan timed out") res0 = dev[0].request("SCAN_RESULTS") res1 = dev[1].request("SCAN_RESULTS") res2 = dev[2].request("SCAN_RESULTS") if bssid in res0 and bssid2 in res0 and bssid in res1 and bssid2 in res2: break res = dev[0].request("SCAN_RESULTS") if bssid not in res or bssid2 not in res: raise Exception("Missing scan result(0)") res = dev[1].request("SCAN_RESULTS") if bssid not in res: raise Exception("Missing scan result(1)") if bssid2 in res: raise Exception("Unexpected scan result(1)") res = dev[2].request("SCAN_RESULTS") if bssid2 not in res: raise Exception("Missing scan result(2)") if bssid in res: raise Exception("Unexpected scan result(2)") finally: if hapd: hapd.request("DISABLE") if hapd2: hapd2.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) for i in range(3): dev[i].request("SET setband AUTO") dev[i].flush_scan_cache() @remote_compatible def test_scan_hidden_many(dev, apdev): """scan_ssid=1 with large number of profile with hidden SSID""" try: _test_scan_hidden_many(dev, apdev) finally: dev[0].flush_scan_cache(freq=2432) dev[0].flush_scan_cache() dev[0].request("SCAN_INTERVAL 5") def _test_scan_hidden_many(dev, apdev): hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan-ssid", "ignore_broadcast_ssid": "1"}) bssid = apdev[0]['bssid'] dev[0].request("SCAN_INTERVAL 1") for i in range(5): id = dev[0].add_network() dev[0].set_network_quoted(id, "ssid", "foo") dev[0].set_network(id, "key_mgmt", "NONE") dev[0].set_network(id, "disabled", "0") dev[0].set_network(id, "scan_freq", "2412") dev[0].set_network(id, "scan_ssid", "1") dev[0].set_network_quoted(id, "ssid", "test-scan-ssid") dev[0].set_network(id, "key_mgmt", "NONE") dev[0].set_network(id, "disabled", "0") dev[0].set_network(id, "scan_freq", "2412") dev[0].set_network(id, "scan_ssid", "1") for i in range(5): id = dev[0].add_network() dev[0].set_network_quoted(id, "ssid", "foo") dev[0].set_network(id, "key_mgmt", "NONE") dev[0].set_network(id, "disabled", "0") dev[0].set_network(id, "scan_freq", "2412") dev[0].set_network(id, "scan_ssid", "1") dev[0].request("REASSOCIATE") dev[0].wait_connected(timeout=30) dev[0].request("REMOVE_NETWORK all") hapd.disable() def test_scan_random_mac(dev, apdev, params): """Random MAC address in scans""" try: _test_scan_random_mac(dev, apdev, params) finally: dev[0].request("MAC_RAND_SCAN all enable=0") def _test_scan_random_mac(dev, apdev, params): hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] tests = ["", "addr=foo", "mask=foo", "enable=1", "all enable=1 mask=00:11:22:33:44:55", "all enable=1 addr=00:11:22:33:44:55", "all enable=1 addr=01:11:22:33:44:55 mask=ff:ff:ff:ff:ff:ff", "all enable=1 addr=00:11:22:33:44:55 mask=fe:ff:ff:ff:ff:ff", "enable=2 scan sched pno all", "pno enable=1", "all enable=2", "foo"] for args in tests: if "FAIL" not in dev[0].request("MAC_RAND_SCAN " + args): raise Exception("Invalid MAC_RAND_SCAN accepted: " + args) if dev[0].get_driver_status_field('capa.mac_addr_rand_scan_supported') != '1': raise HwsimSkip("Driver does not support random MAC address for scanning") tests = ["all enable=1", "all enable=1 addr=f2:11:22:33:44:55 mask=ff:ff:ff:ff:ff:ff", "all enable=1 addr=f2:11:33:00:00:00 mask=ff:ff:ff:00:00:00"] for args in tests: dev[0].request("MAC_RAND_SCAN " + args) dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"), "wlan.fc.type_subtype == 4", ["wlan.ta"]) if out is not None: addr = out.splitlines() logger.info("Probe Request frames seen from: " + str(addr)) if dev[0].own_addr() in addr: raise Exception("Real address used to transmit Probe Request frame") if "f2:11:22:33:44:55" not in addr: raise Exception("Fully configured random address not seen") found = False for a in addr: if a.startswith('f2:11:33'): found = True break if not found: raise Exception("Fixed OUI random address not seen") def test_scan_random_mac_connected(dev, apdev, params): """Random MAC address in scans while connected""" try: _test_scan_random_mac_connected(dev, apdev, params) finally: dev[0].request("MAC_RAND_SCAN all enable=0") def _test_scan_random_mac_connected(dev, apdev, params): hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] if dev[0].get_driver_status_field('capa.mac_addr_rand_scan_supported') != '1': raise HwsimSkip("Driver does not support random MAC address for scanning") dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412") hostapd.add_ap(apdev[1], {"ssid": "test-scan-2", "channel": "11"}) bssid1 = apdev[1]['bssid'] # Verify that scanning can be completed while connected even if that means # disabling use of random MAC address. dev[0].request("MAC_RAND_SCAN all enable=1") dev[0].scan_for_bss(bssid1, freq=2462, force_scan=True) @remote_compatible def test_scan_trigger_failure(dev, apdev): """Scan trigger to the driver failing""" if dev[0].get_status_field('wpa_state') == "SCANNING": raise Exception("wpa_state was already SCANNING") hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] if "OK" not in dev[0].request("SET test_failure 1"): raise Exception("Failed to set test_failure") if "OK" not in dev[0].request("SCAN"): raise Exception("SCAN command failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10) if ev is None: raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event") if "retry=1" in ev: raise Exception("Unexpected scan retry indicated") if dev[0].get_status_field('wpa_state') == "SCANNING": raise Exception("wpa_state SCANNING not cleared") id = dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412", only_add_network=True) dev[0].select_network(id) ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10) if ev is None: raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event") if "retry=1" not in ev: raise Exception("No scan retry indicated for connection") if dev[0].get_status_field('wpa_state') == "SCANNING": raise Exception("wpa_state SCANNING not cleared") dev[0].request("SET test_failure 0") dev[0].wait_connected() dev[0].request("SET test_failure 1") if "OK" not in dev[0].request("SCAN"): raise Exception("SCAN command failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=10) if ev is None: raise Exception("Did not receive CTRL-EVENT-SCAN-FAILED event") if "retry=1" in ev: raise Exception("Unexpected scan retry indicated") if dev[0].get_status_field('wpa_state') != "COMPLETED": raise Exception("wpa_state COMPLETED not restored") dev[0].request("SET test_failure 0") @remote_compatible def test_scan_specify_ssid(dev, apdev): """Control interface behavior on scan SSID parameter""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-hidden", "ignore_broadcast_ssid": "1"}) bssid = apdev[0]['bssid'] check_scan(dev[0], "freq=2412 use_id=1 ssid 414243") bss = dev[0].get_bss(bssid) if bss is not None and bss['ssid'] == 'test-hidden': raise Exception("BSS entry for hidden AP present unexpectedly") # Allow couple more retries to avoid reporting errors during heavy load for i in range(5): check_scan(dev[0], "freq=2412 ssid 414243 ssid 746573742d68696464656e ssid 616263313233 use_id=1") bss = dev[0].get_bss(bssid) if bss and 'test-hidden' in dev[0].request("SCAN_RESULTS"): break if bss is None: raise Exception("BSS entry for hidden AP not found") if 'test-hidden' not in dev[0].request("SCAN_RESULTS"): raise Exception("Expected SSID not included in the scan results") hapd.disable() dev[0].flush_scan_cache(freq=2432) dev[0].flush_scan_cache() if "FAIL" not in dev[0].request("SCAN ssid foo"): raise Exception("Invalid SCAN command accepted") @remote_compatible def test_scan_ap_scan_2_ap_mode(dev, apdev): """AP_SCAN 2 AP mode and scan()""" try: _test_scan_ap_scan_2_ap_mode(dev, apdev) finally: dev[0].request("AP_SCAN 1") def _test_scan_ap_scan_2_ap_mode(dev, apdev): if "OK" not in dev[0].request("AP_SCAN 2"): raise Exception("Failed to set AP_SCAN 2") id = dev[0].add_network() dev[0].set_network(id, "mode", "2") dev[0].set_network_quoted(id, "ssid", "wpas-ap-open") dev[0].set_network(id, "key_mgmt", "NONE") dev[0].set_network(id, "frequency", "2412") dev[0].set_network(id, "scan_freq", "2412") dev[0].set_network(id, "disabled", "0") dev[0].select_network(id) ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=5) if ev is None: raise Exception("AP failed to start") with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"): if "OK" not in dev[0].request("SCAN freq=2412"): raise Exception("SCAN command failed unexpectedly") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED", "AP-DISABLED"], timeout=5) if ev is None: raise Exception("CTRL-EVENT-SCAN-FAILED not seen") if "AP-DISABLED" in ev: raise Exception("Unexpected AP-DISABLED event") if "retry=1" in ev: # Wait for the retry to scan happen ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED", "AP-DISABLED"], timeout=5) if ev is None: raise Exception("CTRL-EVENT-SCAN-FAILED not seen - retry") if "AP-DISABLED" in ev: raise Exception("Unexpected AP-DISABLED event - retry") dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq="2412") dev[1].request("DISCONNECT") dev[1].wait_disconnected() dev[0].request("DISCONNECT") dev[0].wait_disconnected() def test_scan_bss_expiration_on_ssid_change(dev, apdev): """BSS entry expiration when AP changes SSID""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") hapd.request("DISABLE") hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 3"): raise Exception("BSS_EXPIRE_COUNT failed") dev[0].scan(freq="2412") dev[0].scan(freq="2412") if "OK" not in dev[0].request("BSS_EXPIRE_COUNT 2"): raise Exception("BSS_EXPIRE_COUNT failed") res = dev[0].request("SCAN_RESULTS") if "test-scan" not in res: raise Exception("The first SSID not in scan results") if "open" not in res: raise Exception("The second SSID not in scan results") dev[0].connect("open", key_mgmt="NONE") dev[0].request("BSS_FLUSH 0") res = dev[0].request("SCAN_RESULTS") if "test-scan" in res: raise Exception("The BSS entry with the old SSID was not removed") dev[0].request("DISCONNECT") dev[0].wait_disconnected() def test_scan_dfs(dev, apdev, params): """Scan on DFS channels""" try: _test_scan_dfs(dev, apdev, params) finally: subprocess.call(['iw', 'reg', 'set', '00']) time.sleep(0.1) def _test_scan_dfs(dev, apdev, params): subprocess.call(['iw', 'reg', 'set', 'US']) for i in range(2): for j in range(5): ev = dev[i].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=5) if ev is None: raise Exception("No regdom change event") if "alpha2=US" in ev: break dev[i].dump_monitor() if "OK" not in dev[0].request("SCAN"): raise Exception("SCAN command failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") if "OK" not in dev[0].request("SCAN freq=2412,5180,5260,5500,5600,5745"): raise Exception("SCAN command failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"), "wlan.fc.type_subtype == 4", ["radiotap.channel.freq"]) if out is not None: freq = out.splitlines() freq = [int(f) for f in freq] freq = list(set(freq)) freq.sort() logger.info("Active scan seen on channels: " + str(freq)) for f in freq: if (f >= 5260 and f <= 5320) or (f >= 5500 and f <= 5700): raise Exception("Active scan on DFS channel: %d" % f) if f in [2467, 2472]: raise Exception("Active scan on US-disallowed channel: %d" % f) @remote_compatible def test_scan_abort(dev, apdev): """Aborting a full scan""" dev[0].request("SCAN") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"]) if ev is None: raise Exception("Scan did not start") if "OK" not in dev[0].request("ABORT_SCAN"): raise Exception("ABORT_SCAN command failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=2) if ev is None: raise Exception("Scan did not terminate") @remote_compatible def test_scan_abort_on_connect(dev, apdev): """Aborting a full scan on connection request""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") dev[0].dump_monitor() dev[0].request("SCAN") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"]) if ev is None: raise Exception("Scan did not start") dev[0].connect("test-scan", key_mgmt="NONE") @remote_compatible def test_scan_ext(dev, apdev): """Custom IE in Probe Request frame""" hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) bssid = apdev[0]['bssid'] try: if "OK" not in dev[0].request("VENDOR_ELEM_ADD 14 dd050011223300"): raise Exception("VENDOR_ELEM_ADD failed") check_scan(dev[0], "freq=2412 use_id=1") finally: dev[0].request("VENDOR_ELEM_REMOVE 14 *") def test_scan_fail(dev, apdev): """Scan failures""" with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"): dev[0].request("DISCONNECT") if "OK" not in dev[0].request("SCAN freq=2412"): raise Exception("SCAN failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5) if ev is None: raise Exception("Did not see scan failure event") dev[0].dump_monitor() for i in range(1, 5): with alloc_fail(dev[0], i, "wpa_scan_clone_params;wpa_supplicant_trigger_scan"): if "OK" not in dev[0].request("SCAN ssid 112233 freq=2412"): raise Exception("SCAN failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5) if ev is None: raise Exception("Did not see scan failure event") dev[0].dump_monitor() with alloc_fail(dev[0], 1, "radio_add_work;wpa_supplicant_trigger_scan"): if "OK" not in dev[0].request("SCAN freq=2412"): raise Exception("SCAN failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5) if ev is None: raise Exception("Did not see scan failure event") dev[0].dump_monitor() try: if "OK" not in dev[0].request("SET filter_ssids 1"): raise Exception("SET failed") id = dev[0].connect("test-scan", key_mgmt="NONE", only_add_network=True) with alloc_fail(dev[0], 1, "wpa_supplicant_build_filter_ssids"): # While the filter list cannot be created due to memory allocation # failure, this scan is expected to be completed without SSID # filtering. if "OK" not in dev[0].request("SCAN freq=2412"): raise Exception("SCAN failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") dev[0].remove_network(id) finally: dev[0].request("SET filter_ssids 0") dev[0].dump_monitor() with alloc_fail(dev[0], 1, "nl80211_get_scan_results"): if "OK" not in dev[0].request("SCAN freq=2412"): raise Exception("SCAN failed") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5) if ev is None: raise Exception("Did not see scan started event") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") dev[0].dump_monitor() try: if "OK" not in dev[0].request("SET setband 2G"): raise Exception("SET setband failed") with alloc_fail(dev[0], 1, "=wpa_setband_scan_freqs_list"): # While the frequency list cannot be created due to memory # allocation failure, this scan is expected to be completed without # frequency filtering. if "OK" not in dev[0].request("SCAN"): raise Exception("SCAN failed") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") dev[0].request("ABORT_SCAN") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") finally: dev[0].request("SET setband AUTO") dev[0].dump_monitor() wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') wpas.interface_add("wlan5") wpas.request("SET preassoc_mac_addr 1") with fail_test(wpas, 1, "nl80211_set_mac_addr;wpas_trigger_scan_cb"): if "OK" not in wpas.request("SCAN freq=2412"): raise Exception("SCAN failed") ev = wpas.wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5) if ev is None: raise Exception("Did not see scan failure event") wpas.request("SET preassoc_mac_addr 0") wpas.dump_monitor() hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) with alloc_fail(dev[0], 1, "wpa_bss_add"): dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412") def test_scan_fail_type_only(dev, apdev): """Scan failures for TYPE=ONLY""" with fail_test(dev[0], 1, "wpa_driver_nl80211_scan"): dev[0].request("SCAN TYPE=ONLY freq=2417") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-FAILED"], timeout=5) if ev is None: raise Exception("Scan trigger failure not reported") # Verify that scan_only_handler() does not get left set as the # wpa_s->scan_res_handler in failure case. hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) dev[0].connect("open", key_mgmt="NONE", scan_freq="2412") @remote_compatible def test_scan_freq_list(dev, apdev): """Scan with SET freq_list and scan_cur_freq""" try: if "OK" not in dev[0].request("SET freq_list 2412 2417"): raise Exception("SET freq_list failed") check_scan(dev[0], "use_id=1") finally: dev[0].request("SET freq_list ") hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412") try: if "OK" not in dev[0].request("SET scan_cur_freq 1"): raise Exception("SET scan_cur_freq failed") check_scan(dev[0], "use_id=1") finally: dev[0].request("SET scan_cur_freq 0") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() def test_scan_bss_limit(dev, apdev): """Scan and wpa_supplicant BSS entry limit""" try: _test_scan_bss_limit(dev, apdev) finally: dev[0].request("SET bss_max_count 200") pass def _test_scan_bss_limit(dev, apdev): # Trigger 'Increasing the MAX BSS count to 2 because all BSSes are in use. # We should normally not get here!' message by limiting the maximum BSS # count to one so that the second AP would not fit in the BSS list and the # first AP cannot be removed from the list since it is still in use. dev[0].request("SET bss_max_count 1") hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412") hapd2 = hostapd.add_ap(apdev[1], {"ssid": "test-scan-2", "channel": "6"}) dev[0].scan_for_bss(apdev[1]['bssid'], freq=2437, force_scan=True) def run_scan(dev, bssid, exp_freq): for i in range(5): dev.request("SCAN freq=2412,2437,2462") ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"]) if ev is None: raise Exception("Scan did not complete") bss = dev.get_bss(bssid) freq = int(bss['freq']) if bss else 0 if freq == exp_freq: break if freq != exp_freq: raise Exception("BSS entry shows incorrect frequency: %d != %d" % (freq, exp_freq)) def test_scan_chan_switch(dev, apdev): """Scanning and AP changing channels""" # This test verifies that wpa_supplicant updates its local BSS table based # on the correct cfg80211 scan entry in cases where the cfg80211 BSS table # has multiple (one for each frequency) BSS entries for the same BSS. csa_supported(dev[0]) hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan", "channel": "1"}) csa_supported(hapd) bssid = hapd.own_addr() logger.info("AP channel switch while not connected") run_scan(dev[0], bssid, 2412) dev[0].dump_monitor() switch_channel(hapd, 1, 2437) run_scan(dev[0], bssid, 2437) dev[0].dump_monitor() switch_channel(hapd, 1, 2462) run_scan(dev[0], bssid, 2462) dev[0].dump_monitor() logger.info("AP channel switch while connected") dev[0].connect("test-scan", key_mgmt="NONE", scan_freq="2412 2437 2462") run_scan(dev[0], bssid, 2462) dev[0].dump_monitor() switch_channel(hapd, 2, 2437) wait_channel_switch(dev[0], 2437) dev[0].dump_monitor() run_scan(dev[0], bssid, 2437) dev[0].dump_monitor() switch_channel(hapd, 2, 2412) wait_channel_switch(dev[0], 2412) dev[0].dump_monitor() run_scan(dev[0], bssid, 2412) dev[0].dump_monitor() def test_scan_new_only(dev, apdev): """Scan and only_new=1 multiple times""" try: _test_scan_new_only(dev, apdev) finally: dev[0].set("ignore_old_scan_res", "0") def _test_scan_new_only(dev, apdev): dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) dev[0].set("ignore_old_scan_res", "1") # Get the BSS added to cfg80211 BSS list bssid = hapd.own_addr() dev[0].scan_for_bss(bssid, freq=2412) bss = dev[0].get_bss(bssid) idx1 = bss['update_idx'] dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) bss = dev[0].get_bss(bssid) idx2 = bss['update_idx'] if int(idx2) <= int(idx1): raise Exception("Scan result update_idx did not increase") # Disable AP to ensure there are no new scan results after this. hapd.disable() # Try to scan multiple times to verify that old scan results do not get # accepted as new. for i in range(10): dev[0].scan(freq=2412) bss = dev[0].get_bss(bssid) if bss: idx = bss['update_idx'] if int(idx) > int(idx2): raise Exception("Unexpected update_idx increase") def test_scan_flush(dev, apdev): """Ongoing scan and FLUSH""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan"}) dev[0].dump_monitor() dev[0].request("SCAN TYPE=ONLY freq=2412-2472 passive=1") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=10) if ev is None: raise Exception("Scan did not start") time.sleep(0.1) dev[0].request("FLUSH") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS", "CTRL-EVENT-SCAN-FAILED", "CTRL-EVENT-BSS-ADDED"], timeout=10) if ev is None: raise Exception("Scan did not complete") if "CTRL-EVENT-BSS-ADDED" in ev: raise Exception("Unexpected BSS entry addition after FLUSH") def test_scan_ies(dev, apdev): """Scan and both Beacon and Probe Response frame IEs""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan", "beacon_int": "20"}) bssid = hapd.own_addr() dev[0].dump_monitor() for i in range(10): dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15) if ev is None: raise Exception("Scan did not complete") if dev[0].get_bss(bssid): break for i in range(10): dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) bss = dev[0].get_bss(bssid) if 'beacon_ie' in bss: if bss['ie'] != bss['beacon_ie']: break if not bss or 'beacon_ie' not in bss: raise Exception("beacon_ie not present") ie = parse_ie(bss['ie']) logger.info("ie: " + str(list(ie.keys()))) beacon_ie = parse_ie(bss['beacon_ie']) logger.info("beacon_ie: " + str(list(ie.keys()))) if bss['ie'] == bss['beacon_ie']: raise Exception("Both ie and beacon_ie show same data") def test_scan_parsing(dev, apdev): """Scan result parsing""" if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES START"): raise Exception("DRIVER_EVENT SCAN_RES START failed") if "FAIL" not in dev[0].request("DRIVER_EVENT SCAN_RES foo "): raise Exception("Invalid DRIVER_EVENT SCAN_RES accepted") tests = ["", "flags=ffffffff", "bssid=02:03:04:05:06:07", "freq=1234", "beacon_int=102", "caps=1234", "qual=10", "noise=10", "level=10", "tsf=1122334455667788", "age=123", "est_throughput=100", "snr=10", "parent_tsf=1122334455667788", "tsf_bssid=02:03:04:05:06:07", "ie=00", "beacon_ie=00", # Too long SSID "bssid=02:ff:00:00:00:01 ie=0033" + 33*'FF', # All parameters "flags=ffffffff bssid=02:ff:00:00:00:02 freq=1234 beacon_int=102 caps=1234 qual=10 noise=10 level=10 tsf=1122334455667788 age=123456 est_throughput=100 snr=10 parent_tsf=1122334455667788 tsf_bssid=02:03:04:05:06:07 ie=000474657374 beacon_ie=000474657374", # Beacon IEs truncated "bssid=02:ff:00:00:00:03 ie=0000 beacon_ie=0003ffff", # Probe Response IEs truncated "bssid=02:ff:00:00:00:04 ie=00000101 beacon_ie=0000", # DMG (invalid caps) "bssid=02:ff:00:00:00:05 freq=58320 ie=0003646d67", # DMG (IBSS) "bssid=02:ff:00:00:00:06 freq=60480 caps=0001 ie=0003646d67", # DMG (PBSS) "bssid=02:ff:00:00:00:07 freq=62640 caps=0002 ie=0003646d67", # DMG (AP) "bssid=02:ff:00:00:00:08 freq=64800 caps=0003 ie=0003646d67", # Test BSS for updates "bssid=02:ff:00:00:00:09 freq=2412 caps=0011 level=1 ie=0003757064010182", # Minimal BSS data "bssid=02:ff:00:00:00:00 ie=0000"] for t in tests: if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES BSS " + t): raise Exception("DRIVER_EVENT SCAN_RES BSS failed") if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES END"): raise Exception("DRIVER_EVENT SCAN_RES END failed") res = dev[0].request("SCAN_RESULTS") logger.info("SCAN_RESULTS:\n" + res) bss = [] res = dev[0].request("BSS FIRST") if "FAIL" in res: raise Exception("BSS FIRST failed") while "\nbssid=" in res: logger.info("BSS output:\n" + res) bssid = None id = None for val in res.splitlines(): if val.startswith("id="): id = val.split('=')[1] if val.startswith("bssid="): bssid = val.split('=')[1] if bssid is None or id is None: raise Exception("Missing id or bssid line") bss.append(bssid) res = dev[0].request("BSS NEXT-" + id) logger.info("Discovered BSSs: " + str(bss)) invalid_bss = ["02:03:04:05:06:07", "02:ff:00:00:00:01"] valid_bss = ["02:ff:00:00:00:00", "02:ff:00:00:00:02", "02:ff:00:00:00:03", "02:ff:00:00:00:04", "02:ff:00:00:00:05", "02:ff:00:00:00:06", "02:ff:00:00:00:07", "02:ff:00:00:00:08", "02:ff:00:00:00:09"] for bssid in invalid_bss: if bssid in bss: raise Exception("Invalid BSS included: " + bssid) for bssid in valid_bss: if bssid not in bss: raise Exception("Valid BSS missing: " + bssid) logger.info("Update BSS parameters") if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES START"): raise Exception("DRIVER_EVENT SCAN_RES START failed") if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES BSS bssid=02:ff:00:00:00:09 freq=2412 caps=0002 level=2 ie=000375706401028204"): raise Exception("DRIVER_EVENT SCAN_RES BSS failed") if "OK" not in dev[0].request("DRIVER_EVENT SCAN_RES END"): raise Exception("DRIVER_EVENT SCAN_RES END failed") res = dev[0].request("BSS 02:ff:00:00:00:09") logger.info("Updated BSS:\n" + res) def test_scan_specific_bssid(dev, apdev): """Scan for a specific BSSID""" dev[0].flush_scan_cache() hapd = hostapd.add_ap(apdev[0], {"ssid": "test-scan", "beacon_int": "1000"}) bssid = hapd.own_addr() time.sleep(0.1) dev[0].request("SCAN TYPE=ONLY freq=2412 bssid=02:ff:ff:ff:ff:ff") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10) if ev is None: raise Exception("Scan did not complete") bss1 = dev[0].get_bss(bssid) for i in range(10): dev[0].request("SCAN TYPE=ONLY freq=2412 bssid=" + bssid) ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10) if ev is None: raise Exception("Scan did not complete") bss2 = dev[0].get_bss(bssid) if bss2: break if not bss2: raise Exception("Did not find BSS") if bss1 and 'beacon_ie' in bss1 and 'ie' in bss1 and bss1['beacon_ie'] != bss1['ie']: raise Exception("First scan for unknown BSSID returned unexpected response") if bss2 and 'beacon_ie' in bss2 and 'ie' in bss2 and bss2['beacon_ie'] == bss2['ie']: raise Exception("Second scan did find Probe Response frame") def test_scan_probe_req_events(dev, apdev): """Probe Request frame RX events from hostapd""" hapd = hostapd.add_ap(apdev[0], {"ssid": "open"}) hapd2 = hostapd.Hostapd(apdev[0]['ifname']) if "OK" not in hapd2.mon.request("ATTACH probe_rx_events=1"): raise Exception("Failed to register for events") dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True) ev = hapd2.wait_event(["RX-PROBE-REQUEST"], timeout=5) if ev is None: raise Exception("RX-PROBE-REQUEST not reported") if "sa=" + dev[0].own_addr() not in ev: raise Exception("Unexpected event parameters: " + ev) ev = hapd.wait_event(["RX-PROBE-REQUEST"], timeout=0.1) if ev is not None: raise Exception("Unexpected RX-PROBE-REQUEST") if "OK" not in hapd2.mon.request("ATTACH probe_rx_events=0"): raise Exception("Failed to update event registration") dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True) ev = hapd2.wait_event(["RX-PROBE-REQUEST"], timeout=0.5) if ev is not None: raise Exception("Unexpected RX-PROBE-REQUEST") tests = ["probe_rx_events", "probe_rx_events=-1", "probe_rx_events=2"] for val in tests: if "FAIL" not in hapd2.mon.request("ATTACH " + val): raise Exception("Invalid ATTACH command accepted") def elem_capab(capab): # Nontransmitted BSSID Capability element (83 = 0x53) return struct.pack(' 255: raise Exception("Too long Multiple BSSID element") elem = struct.pack('BBB', 71, 1 + len(profiles), max_bssid_indic) + profiles return binascii.hexlify(elem).decode() def run_scans(dev, check): for i in range(2): dev.request("SCAN TYPE=ONLY freq=2412") ev = dev.wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10) if ev is None: raise Exception("Scan did not complete") # TODO: Check IEs for (bssid, ssid, capab) in check: bss = dev.get_bss(bssid) if bss is None: raise Exception("AP " + bssid + " missing from scan results") logger.info("AP " + bssid + ": " + str(bss)) if bss['ssid'] != ssid: raise Exception("Unexpected AP " + bssid + " SSID") if int(bss['capabilities'], 16) != capab: raise Exception("Unexpected AP " + bssid + " capabilities") def check_multibss_sta_capa(dev): res = dev.get_capability("multibss") if res is None or 'MULTIBSS-STA' not in res: raise HwsimSkip("Multi-BSS STA functionality not supported") def test_scan_multi_bssid(dev, apdev): """Scan and Multiple BSSID element""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() params = {"ssid": "test-scan"} # Max BSSID Indicator 0 (max 1 BSSID) and no subelements params['vendor_elements'] = elem_multibssid(b'', 0) hostapd.add_ap(apdev[0], params) params = {"ssid": "test-scan"} elems = elem_capab(0x0401) + elem_ssid("1") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems params['vendor_elements'] = elem_multibssid(profile1, 1) hostapd.add_ap(apdev[1], params) bssid0 = apdev[0]['bssid'] bssid1 = apdev[1]['bssid'] check = [(bssid0, 'test-scan', 0x401), (bssid1, 'test-scan', 0x401), (bssid1[0:16] + '1', '1', 0x401)] run_scans(dev[0], check) def test_scan_multi_bssid_2(dev, apdev): """Scan and Multiple BSSID element (2)""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() params = {"ssid": "transmitted"} # Duplicated entry for the transmitted BSS (not a normal use case) elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) profile2 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted_2") + elem_bssid_index(2) profile3 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 + profile3 params['vendor_elements'] = elem_multibssid(profiles, 4) hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] check = [(bssid, 'transmitted', 0x401), (bssid[0:16] + '1', 'nontransmitted', 0x1), (bssid[0:16] + '2', 'nontransmitted_2', 0x1)] run_scans(dev[0], check) def test_scan_multi_bssid_3(dev, apdev): """Scan and Multiple BSSID element (3)""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() params = {"ssid": "transmitted"} # Duplicated nontransmitted BSS (not a normal use case) elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) profile2 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 params['vendor_elements'] = elem_multibssid(profiles, 2) hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] check = [(bssid, 'transmitted', 0x401), (bssid[0:16] + '1', 'nontransmitted', 0x1)] run_scans(dev[0], check) def test_scan_multi_bssid_4(dev, apdev): """Scan and Multiple BSSID element (3)""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() # Transmitted BSSID is not the first one in the block bssid = apdev[0]['bssid'] hapd = None try: params = {"ssid": "transmitted", "bssid": bssid[0:16] + '1'} elems = elem_capab(1) + elem_ssid("1") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("2") + elem_bssid_index(2) profile2 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("3") + elem_bssid_index(3) profile3 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 + profile3 params['vendor_elements'] = elem_multibssid(profiles, 2) hapd = hostapd.add_ap(apdev[0], params) check = [(bssid[0:16] + '1', 'transmitted', 0x401), (bssid[0:16] + '2', '1', 0x1), (bssid[0:16] + '3', '2', 0x1), (bssid[0:16] + '0', '3', 0x1)] run_scans(dev[0], check) finally: if hapd: hapd.disable() hapd.set('bssid', bssid) hapd.enable() def test_scan_multi_bssid_check_ie(dev, apdev): """Scan and check if nontransmitting BSS inherits IE from transmitting BSS""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() params = {"ssid": "transmitted"} # Duplicated entry for the transmitted BSS (not a normal use case) elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) profile2 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 params['vendor_elements'] = elem_multibssid(profiles, 2) hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] for i in range(10): dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15) if ev is None: raise Exception("Scan did not complete") if dev[0].get_bss(bssid): break for i in range(10): dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) bss = dev[0].get_bss(bssid) if 'beacon_ie' in bss: break trans_bss = dev[0].get_bss(bssid) if trans_bss is None: raise Exception("AP " + bssid + " missing from scan results") if not trans_bss or 'beacon_ie' not in trans_bss: raise Exception("beacon_ie not present in trans_bss") beacon_ie = parse_ie(trans_bss['beacon_ie']) logger.info("trans_bss beacon_ie: " + str(list(beacon_ie.keys()))) bssid = bssid[0:16] + '1' nontrans_bss1 = dev[0].get_bss(bssid) if nontrans_bss1 is None: raise Exception("AP " + bssid + " missing from scan results") if not trans_bss or 'beacon_ie' not in nontrans_bss1: raise Exception("beacon_ie not present in nontrans_bss1") nontx_beacon_ie = parse_ie(nontrans_bss1['beacon_ie']) logger.info("nontrans_bss1 beacon_ie: " + str(list(nontx_beacon_ie.keys()))) if 71 in list(beacon_ie.keys()): ie_list = list(beacon_ie.keys()) ie_list.remove(71) nontx_ie_list = list(nontx_beacon_ie.keys()) try: nontx_ie_list.remove(85) except ValueError: pass if sorted(ie_list) != sorted(nontx_ie_list): raise Exception("check IE failed") def elem_fms1(): # this FMS IE has 1 FMS counter fms_counters = struct.pack('B', 0x39) fms_ids = struct.pack('B', 0x01) return struct.pack('BBB', 86, 3, 1) + fms_counters + fms_ids def elem_fms2(): # this FMS IE has 2 FMS counters fms_counters = struct.pack('BB', 0x29, 0x32) fms_ids = struct.pack('BB', 0x01, 0x02) return struct.pack('BBB', 86, 5, 2) + fms_counters + fms_ids def test_scan_multi_bssid_fms(dev, apdev): """Non-transmitting BSS has different FMS IE from transmitting BSS""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() params = {"ssid": "transmitted"} # construct transmitting BSS Beacon with FMS IE elems = elem_capab(1) + elem_ssid("transmitted") + elem_bssid_index(0) + elem_fms1() profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) + elem_fms2() profile2 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 params['vendor_elements'] = elem_multibssid(profiles, 2) + binascii.hexlify(elem_fms1()).decode() hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] for i in range(10): dev[0].request("SCAN TYPE=ONLY freq=2412 passive=1") ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15) if ev is None: raise Exception("Scan did not complete") if dev[0].get_bss(bssid): break for i in range(10): dev[0].scan_for_bss(bssid, freq=2412, force_scan=True) bss = dev[0].get_bss(bssid) if 'beacon_ie' in bss: break trans_bss = dev[0].get_bss(bssid) if trans_bss is None: raise Exception("AP " + bssid + " missing from scan results") if not trans_bss or 'beacon_ie' not in trans_bss: raise Exception("beacon_ie not present in trans_bss") beacon_ie = parse_ie(trans_bss['beacon_ie']) trans_bss_fms = beacon_ie[86] logger.info("trans_bss fms ie: " + binascii.hexlify(trans_bss_fms).decode()) bssid = bssid[0:16] + '1' nontrans_bss1 = dev[0].get_bss(bssid) if nontrans_bss1 is None: raise Exception("AP " + bssid + " missing from scan results") if not nontrans_bss1 or 'beacon_ie' not in nontrans_bss1: raise Exception("beacon_ie not present in nontrans_bss1") nontrans_beacon_ie = parse_ie(nontrans_bss1['beacon_ie']) nontrans_bss_fms = nontrans_beacon_ie[86] logger.info("nontrans_bss fms ie: " + binascii.hexlify(nontrans_bss_fms).decode()) if binascii.hexlify(trans_bss_fms) == binascii.hexlify(nontrans_bss_fms): raise Exception("Nontrans BSS has the same FMS IE as trans BSS") def test_scan_multiple_mbssid_ie(dev, apdev): """Transmitting BSS has 2 MBSSID IE""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() bssid = apdev[0]['bssid'] logger.info("bssid: " + bssid) hapd = None # construct 2 MBSSID IEs, each MBSSID IE contains 1 profile params = {"ssid": "transmitted", "bssid": bssid} elems = elem_capab(1) + elem_ssid("1") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(2) + elem_ssid("2") + elem_bssid_index(2) profile2 = struct.pack('BB', 0, len(elems)) + elems params['vendor_elements'] = elem_multibssid(profile1, 2) + elem_multibssid(profile2, 2) hapd = hostapd.add_ap(apdev[0], params) check = [(bssid, 'transmitted', 0x401), (bssid[0:16] + '1', '1', 0x1), (bssid[0:16] + '2', '2', 0x2)] run_scans(dev[0], check) def test_scan_mbssid_hidden_ssid(dev, apdev): """Non-transmitting BSS has hidden SSID""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() bssid = apdev[0]['bssid'] logger.info("bssid: " + bssid) hapd = None # construct 2 MBSSID IEs, each MBSSID IE contains 1 profile params = {"ssid": "transmitted", "bssid": bssid} elems = elem_capab(1) + elem_ssid("") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(2) + elem_ssid("2") + elem_bssid_index(2) profile2 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 params['vendor_elements'] = elem_multibssid(profiles, 2) hapd = hostapd.add_ap(apdev[0], params) check = [(bssid, 'transmitted', 0x401), (bssid[0:16] + '1', '', 0x1), (bssid[0:16] + '2', '2', 0x2)] run_scans(dev[0], check) def test_connect_mbssid_open_1(dev, apdev): """Connect to transmitting and nontransmitting BSS in open mode""" check_multibss_sta_capa(dev[0]) dev[0].flush_scan_cache() bssid = apdev[0]['bssid'] params = {"ssid": "transmitted"} elems = elem_capab(1) + elem_ssid("nontransmitted") + elem_bssid_index(1) profile1 = struct.pack('BB', 0, len(elems)) + elems elems = elem_capab(1) + elem_ssid("nontransmitted_2") + elem_bssid_index(2) profile2 = struct.pack('BB', 0, len(elems)) + elems profiles = profile1 + profile2 params['vendor_elements'] = elem_multibssid(profiles, 4) hostapd.add_ap(apdev[0], params) dev[0].connect("transmitted", key_mgmt="NONE", scan_freq="2412") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() dev[0].dump_monitor() dev[0].connect("nontransmitted", key_mgmt="NONE", scan_freq="2412", wait_connect=False) ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=10) if ev is None: raise Exception("Connection attempt to nontransmitted BSS not started") if "02:00:00:00:03:01 (SSID='nontransmitted'" not in ev: raise Exception("Unexpected authentication target") # hostapd does not yet support Multiple-BSSID, so only verify that STA is # able to start connection attempt. dev[0].request("REMOVE_NETWORK all") dev[0].dump_monitor() dev[0].connect("nontransmitted_2", key_mgmt="NONE", scan_freq="2412", wait_connect=False) ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=10) if ev is None: raise Exception("Connection attempt to nontransmitted BSS not started") if "02:00:00:00:03:02 (SSID='nontransmitted_2'" not in ev: raise Exception("Unexpected authentication target") # hostapd does not yet support Multiple-BSSID, so only verify that STA is # able to start connection attempt. dev[0].request("REMOVE_NETWORK all") dev[0].dump_monitor()