# -*- coding: utf-8 -*- # WPA2-Enterprise tests # Copyright (c) 2013-2015, Jouni Malinen # # This software may be distributed under the terms of the BSD license. # See README for more details. import base64 import binascii import time import subprocess import logging logger = logging.getLogger() import os import hwsim_utils import hostapd from utils import HwsimSkip, alloc_fail from test_ap_psk import check_mib, find_wpas_process, read_process_memory, verify_not_present, get_key_locations def check_hlr_auc_gw_support(): if not os.path.exists("/tmp/hlr_auc_gw.sock"): raise HwsimSkip("No hlr_auc_gw available") def check_eap_capa(dev, method): res = dev.get_capability("eap") if method not in res: raise HwsimSkip("EAP method %s not supported in the build" % method) def check_subject_match_support(dev): tls = dev.request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("subject_match not supported with this TLS library: " + tls) def check_altsubject_match_support(dev): tls = dev.request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("altsubject_match not supported with this TLS library: " + tls) def check_domain_match_full(dev): tls = dev.request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("domain_suffix_match requires full match with this TLS library: " + tls) def check_cert_probe_support(dev): tls = dev.request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("Certificate probing not supported with this TLS library: " + tls) def read_pem(fname): with open(fname, "r") as f: lines = f.readlines() copy = False cert = "" for l in lines: if "-----END" in l: break if copy: cert = cert + l if "-----BEGIN" in l: copy = True return base64.b64decode(cert) def eap_connect(dev, ap, method, identity, sha256=False, expect_failure=False, local_error_report=False, **kwargs): hapd = hostapd.Hostapd(ap['ifname']) id = dev.connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256", eap=method, identity=identity, wait_connect=False, scan_freq="2412", ieee80211w="1", **kwargs) eap_check_auth(dev, method, True, sha256=sha256, expect_failure=expect_failure, local_error_report=local_error_report) if expect_failure: return id ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5) if ev is None: raise Exception("No connection event received from hostapd") return id def eap_check_auth(dev, method, initial, rsn=True, sha256=False, expect_failure=False, local_error_report=False): ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev.wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if method not in ev: raise Exception("Unexpected EAP method") if expect_failure: ev = dev.wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("EAP failure timed out") ev = dev.wait_disconnected(timeout=10) if not local_error_report: if "reason=23" not in ev: raise Exception("Proper reason code for disconnection not reported") return ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10) if ev is None: raise Exception("EAP success timed out") if initial: ev = dev.wait_event(["CTRL-EVENT-CONNECTED"], timeout=10) else: ev = dev.wait_event(["WPA: Key negotiation completed"], timeout=10) if ev is None: raise Exception("Association with the AP timed out") status = dev.get_status() if status["wpa_state"] != "COMPLETED": raise Exception("Connection not completed") if status["suppPortStatus"] != "Authorized": raise Exception("Port not authorized") if method not in status["selectedMethod"]: raise Exception("Incorrect EAP method status") if sha256: e = "WPA2-EAP-SHA256" elif rsn: e = "WPA2/IEEE 802.1X/EAP" else: e = "WPA/IEEE 802.1X/EAP" if status["key_mgmt"] != e: raise Exception("Unexpected key_mgmt status: " + status["key_mgmt"]) return status def eap_reauth(dev, method, rsn=True, sha256=False, expect_failure=False): dev.request("REAUTHENTICATE") return eap_check_auth(dev, method, False, rsn=rsn, sha256=sha256, expect_failure=expect_failure) def test_ap_wpa2_eap_sim(dev, apdev): """WPA2-Enterprise connection using EAP-SIM""" check_hlr_auc_gw_support() params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "SIM") eap_connect(dev[1], apdev[0], "SIM", "1232010000000001", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") eap_connect(dev[2], apdev[0], "SIM", "1232010000000002", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", expect_failure=True) logger.info("Negative test with incorrect key") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", expect_failure=True) logger.info("Invalid GSM-Milenage key") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a", expect_failure=True) logger.info("Invalid GSM-Milenage key(2)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581", expect_failure=True) logger.info("Invalid GSM-Milenage key(3)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q", expect_failure=True) logger.info("Invalid GSM-Milenage key(4)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581", expect_failure=True) logger.info("Missing key configuration") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", expect_failure=True) def test_ap_wpa2_eap_sim_sql(dev, apdev, params): """WPA2-Enterprise connection using EAP-SIM (SQL)""" check_hlr_auc_gw_support() try: import sqlite3 except ImportError: raise HwsimSkip("No sqlite3 module available") con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db")) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "1814" hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") logger.info("SIM fast re-authentication") eap_reauth(dev[0], "SIM") logger.info("SIM full auth with pseudonym") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='1232010000000000'") eap_reauth(dev[0], "SIM") logger.info("SIM full auth with permanent identity") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='1232010000000000'") cur.execute("DELETE FROM pseudonyms WHERE permanent='1232010000000000'") eap_reauth(dev[0], "SIM") logger.info("SIM reauth with mismatching MK") with con: cur = con.cursor() cur.execute("UPDATE reauth SET mk='0000000000000000000000000000000000000000' WHERE permanent='1232010000000000'") eap_reauth(dev[0], "SIM", expect_failure=True) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='1232010000000000'") eap_reauth(dev[0], "SIM") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='1232010000000000'") logger.info("SIM reauth with mismatching counter") eap_reauth(dev[0], "SIM") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='1232010000000000'") logger.info("SIM reauth with max reauth count reached") eap_reauth(dev[0], "SIM") def test_ap_wpa2_eap_sim_config(dev, apdev): """EAP-SIM configuration options""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM", identity="1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", phase1="sim_min_num_chal=1", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 18 (SIM)"], timeout=10) if ev is None: raise Exception("No EAP error message seen") dev[0].request("REMOVE_NETWORK all") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM", identity="1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", phase1="sim_min_num_chal=4", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 18 (SIM)"], timeout=10) if ev is None: raise Exception("No EAP error message seen (2)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", phase1="sim_min_num_chal=2") eap_connect(dev[1], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", anonymous_identity="345678") def test_ap_wpa2_eap_sim_ext(dev, apdev): """WPA2-Enterprise connection using EAP-SIM and external GSM auth""" try: _test_ap_wpa2_eap_sim_ext(dev, apdev) finally: dev[0].request("SET external_sim 0") def _test_ap_wpa2_eap_sim_ext(dev, apdev): check_hlr_auc_gw_support() params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET external_sim 1") id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP", identity="1232010000000000", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=15) if ev is None: raise Exception("Network connected timed out") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # IK:CK:RES resp = "00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344" # This will fail during processing, but the ctrl_iface command succeeds dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:" + resp) ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:q"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:34"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:q"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:00112233"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "GSM-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during GSM auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:0011223344556677:00112233:q"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") def test_ap_wpa2_eap_aka(dev, apdev): """WPA2-Enterprise connection using EAP-AKA""" check_hlr_auc_gw_support() params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "AKA") logger.info("Negative test with incorrect key") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", expect_failure=True) logger.info("Invalid Milenage key") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a", expect_failure=True) logger.info("Invalid Milenage key(2)") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581:000000000123", expect_failure=True) logger.info("Invalid Milenage key(3)") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q:000000000123", expect_failure=True) logger.info("Invalid Milenage key(4)") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:00000000012q", expect_failure=True) logger.info("Invalid Milenage key(5)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581q000000000123", expect_failure=True) logger.info("Invalid Milenage key(6)") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581q000000000123", expect_failure=True) logger.info("Missing key configuration") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", expect_failure=True) def test_ap_wpa2_eap_aka_sql(dev, apdev, params): """WPA2-Enterprise connection using EAP-AKA (SQL)""" check_hlr_auc_gw_support() try: import sqlite3 except ImportError: raise HwsimSkip("No sqlite3 module available") con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db")) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "1814" hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") logger.info("AKA fast re-authentication") eap_reauth(dev[0], "AKA") logger.info("AKA full auth with pseudonym") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='0232010000000000'") eap_reauth(dev[0], "AKA") logger.info("AKA full auth with permanent identity") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='0232010000000000'") cur.execute("DELETE FROM pseudonyms WHERE permanent='0232010000000000'") eap_reauth(dev[0], "AKA") logger.info("AKA reauth with mismatching MK") with con: cur = con.cursor() cur.execute("UPDATE reauth SET mk='0000000000000000000000000000000000000000' WHERE permanent='0232010000000000'") eap_reauth(dev[0], "AKA", expect_failure=True) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='0232010000000000'") eap_reauth(dev[0], "AKA") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='0232010000000000'") logger.info("AKA reauth with mismatching counter") eap_reauth(dev[0], "AKA") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='0232010000000000'") logger.info("AKA reauth with max reauth count reached") eap_reauth(dev[0], "AKA") def test_ap_wpa2_eap_aka_config(dev, apdev): """EAP-AKA configuration options""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", anonymous_identity="2345678") def test_ap_wpa2_eap_aka_ext(dev, apdev): """WPA2-Enterprise connection using EAP-AKA and external UMTS auth""" try: _test_ap_wpa2_eap_aka_ext(dev, apdev) finally: dev[0].request("SET external_sim 0") def _test_ap_wpa2_eap_aka_ext(dev, apdev): check_hlr_auc_gw_support() params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET external_sim 1") id = dev[0].connect("test-wpa2-eap", eap="AKA", key_mgmt="WPA-EAP", identity="0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=15) if ev is None: raise Exception("Network connected timed out") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # IK:CK:RES resp = "00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344" # This will fail during processing, but the ctrl_iface command succeeds dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp) ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:" + resp): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTS:112233445566778899aabbccddee"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTS:12"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:34"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:00112233445566778899aabbccddeeff.00112233445566778899aabbccddeeff:0011223344"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddee:0011223344"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff.0011223344"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff0011223344"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15) if ev is None: raise Exception("Wait for external SIM processing request timed out") p = ev.split(':', 2) if p[1] != "UMTS-AUTH": raise Exception("Unexpected CTRL-REQ-SIM type") rid = p[0].split('-')[3] # This will fail during UMTS auth validation if "OK" not in dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:001122334q"): raise Exception("CTRL-RSP-SIM failed") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15) if ev is None: raise Exception("EAP failure not reported") dev[0].request("DISCONNECT") dev[0].wait_disconnected() def test_ap_wpa2_eap_aka_prime(dev, apdev): """WPA2-Enterprise connection using EAP-AKA'""" check_hlr_auc_gw_support() params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "AKA'") logger.info("EAP-AKA' bidding protection when EAP-AKA enabled as well") dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="AKA' AKA", identity="6555444333222111@both", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123", wait_connect=False, scan_freq="2412") dev[1].wait_connected(timeout=15) logger.info("Negative test with incorrect key") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="ff22250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123", expect_failure=True) def test_ap_wpa2_eap_aka_prime_sql(dev, apdev, params): """WPA2-Enterprise connection using EAP-AKA' (SQL)""" check_hlr_auc_gw_support() try: import sqlite3 except ImportError: raise HwsimSkip("No sqlite3 module available") con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db")) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['auth_server_port'] = "1814" hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") logger.info("AKA' fast re-authentication") eap_reauth(dev[0], "AKA'") logger.info("AKA' full auth with pseudonym") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='6555444333222111'") eap_reauth(dev[0], "AKA'") logger.info("AKA' full auth with permanent identity") with con: cur = con.cursor() cur.execute("DELETE FROM reauth WHERE permanent='6555444333222111'") cur.execute("DELETE FROM pseudonyms WHERE permanent='6555444333222111'") eap_reauth(dev[0], "AKA'") logger.info("AKA' reauth with mismatching k_aut") with con: cur = con.cursor() cur.execute("UPDATE reauth SET k_aut='0000000000000000000000000000000000000000000000000000000000000000' WHERE permanent='6555444333222111'") eap_reauth(dev[0], "AKA'", expect_failure=True) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='6555444333222111'") eap_reauth(dev[0], "AKA'") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='10' WHERE permanent='6555444333222111'") logger.info("AKA' reauth with mismatching counter") eap_reauth(dev[0], "AKA'") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") with con: cur = con.cursor() cur.execute("UPDATE reauth SET counter='1001' WHERE permanent='6555444333222111'") logger.info("AKA' reauth with max reauth count reached") eap_reauth(dev[0], "AKA'") def test_ap_wpa2_eap_ttls_pap(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) key_mgmt = hapd.get_config()['key_mgmt'] if key_mgmt.split(' ')[0] != "WPA-EAP": raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt) eap_connect(dev[0], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-1"), ("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-1") ]) def test_ap_wpa2_eap_ttls_pap_subject_match(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP and (alt)subject_match""" check_subject_match_support(dev[0]) check_altsubject_match_support(dev[0]) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP", subject_match="/C=FI/O=w1.fi/CN=server.w1.fi", altsubject_match="EMAIL:noone@example.com;DNS:server.w1.fi;URI:http://example.com/") eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_pap_incorrect_password(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP - incorrect password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="wrong", ca_cert="auth_serv/ca.pem", phase2="auth=PAP", expect_failure=True) eap_connect(dev[1], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP", expect_failure=True) def test_ap_wpa2_eap_ttls_chap(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "chap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.der", phase2="auth=CHAP") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_chap_altsubject_match(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP""" check_altsubject_match_support(dev[0]) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "chap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.der", phase2="auth=CHAP", altsubject_match="EMAIL:noone@example.com;URI:http://example.com/;DNS:server.w1.fi") eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_chap_incorrect_password(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP - incorrect password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "chap user", anonymous_identity="ttls", password="wrong", ca_cert="auth_serv/ca.pem", phase2="auth=CHAP", expect_failure=True) eap_connect(dev[1], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=CHAP", expect_failure=True) def test_ap_wpa2_eap_ttls_mschap(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAP""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "mschap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", domain_suffix_match="server.w1.fi") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "TTLS", "mschap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", fragment_size="200") def test_ap_wpa2_eap_ttls_mschap_incorrect_password(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP - incorrect password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "mschap user", anonymous_identity="ttls", password="wrong", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", expect_failure=True) eap_connect(dev[1], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", expect_failure=True) eap_connect(dev[2], apdev[0], "TTLS", "no such user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", expect_failure=True) def test_ap_wpa2_eap_ttls_mschapv2(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) hapd = hostapd.Hostapd(apdev[0]['ifname']) eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", domain_suffix_match="server.w1.fi") hwsim_utils.test_connectivity(dev[0], hapd) sta1 = hapd.get_sta(dev[0].p2p_interface_addr()) eapol1 = hapd.get_sta(dev[0].p2p_interface_addr(), info="eapol") eap_reauth(dev[0], "TTLS") sta2 = hapd.get_sta(dev[0].p2p_interface_addr()) eapol2 = hapd.get_sta(dev[0].p2p_interface_addr(), info="eapol") if int(sta2['dot1xAuthEapolFramesRx']) <= int(sta1['dot1xAuthEapolFramesRx']): raise Exception("dot1xAuthEapolFramesRx did not increase") if int(eapol2['authAuthEapStartsWhileAuthenticated']) < 1: raise Exception("authAuthEapStartsWhileAuthenticated did not increase") if int(eapol2['backendAuthSuccesses']) <= int(eapol1['backendAuthSuccesses']): raise Exception("backendAuthSuccesses did not increase") logger.info("Password as hash value") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") def test_ap_wpa2_eap_ttls_mschapv2_suffix_match(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2""" check_domain_match_full(dev[0]) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) hapd = hostapd.Hostapd(apdev[0]['ifname']) eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", domain_suffix_match="w1.fi") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_mschapv2_domain_match(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 (domain_match)""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) hapd = hostapd.Hostapd(apdev[0]['ifname']) eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", domain_match="Server.w1.fi") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_mschapv2_incorrect_password(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 - incorrect password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password1", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", expect_failure=True) eap_connect(dev[1], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", expect_failure=True) def test_ap_wpa2_eap_ttls_mschapv2_utf8(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 and UTF-8 password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) hapd = hostapd.Hostapd(apdev[0]['ifname']) eap_connect(dev[0], apdev[0], "TTLS", "utf8-user-hash", anonymous_identity="ttls", password="secret-åäö-€-password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") eap_connect(dev[1], apdev[0], "TTLS", "utf8-user", anonymous_identity="ttls", password_hex="hash:bd5844fad2489992da7fe8c5a01559cf", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") def test_ap_wpa2_eap_ttls_eap_gtc(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-GTC""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=GTC") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_eap_md5(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-MD5""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=MD5") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") def test_ap_wpa2_eap_ttls_eap_md5_incorrect_password(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - incorrect password""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="wrong", ca_cert="auth_serv/ca.pem", phase2="autheap=MD5", expect_failure=True) def test_ap_wpa2_eap_ttls_eap_md5_server_oom(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - server OOM""" params = int_eap_server_params() hapd = hostapd.add_ap(apdev[0]['ifname'], params) with alloc_fail(hapd, 1, "eap_md5_init"): eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=MD5", expect_failure=True) dev[0].request("REMOVE_NETWORK all") with alloc_fail(hapd, 1, "eap_md5_buildReq"): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256", eap="TTLS", identity="user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=MD5", wait_connect=False, scan_freq="2412") # This would eventually time out, but we can stop after having reached # the allocation failure. for i in range(20): time.sleep(0.1) if hapd.request("GET_ALLOC_FAIL").startswith('0'): break def test_ap_wpa2_eap_ttls_eap_mschapv2(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "TTLS") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "TTLS", "user", anonymous_identity="ttls", password="password1", ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2", expect_failure=True) def test_ap_wpa2_eap_ttls_eap_aka(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/EAP-AKA""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "0232010000000000", anonymous_identity="0232010000000000@ttls", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", ca_cert="auth_serv/ca.pem", phase2="autheap=AKA") def test_ap_wpa2_eap_peap_eap_aka(dev, apdev): """WPA2-Enterprise connection using EAP-PEAP/EAP-AKA""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PEAP", "0232010000000000", anonymous_identity="0232010000000000@peap", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", ca_cert="auth_serv/ca.pem", phase2="auth=AKA") def test_ap_wpa2_eap_fast_eap_aka(dev, apdev): """WPA2-Enterprise connection using EAP-FAST/EAP-AKA""" check_eap_capa(dev[0], "FAST") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "FAST", "0232010000000000", anonymous_identity="0232010000000000@fast", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth_aka", ca_cert="auth_serv/ca.pem", phase2="auth=AKA") def test_ap_wpa2_eap_peap_eap_mschapv2(dev, apdev): """WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PEAP", "user", anonymous_identity="peap", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "PEAP") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PEAP", "user", anonymous_identity="peap", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", fragment_size="200") logger.info("Password as hash value") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PEAP", "user", anonymous_identity="peap", password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PEAP", "user", anonymous_identity="peap", password="password1", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", expect_failure=True) def test_ap_wpa2_eap_peap_crypto_binding(dev, apdev): """WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and crypto binding""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PEAP", "user", password="password", ca_cert="auth_serv/ca.pem", phase1="peapver=0 crypto_binding=2", phase2="auth=MSCHAPV2") hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "PEAP") eap_connect(dev[1], apdev[0], "PEAP", "user", password="password", ca_cert="auth_serv/ca.pem", phase1="peapver=0 crypto_binding=1", phase2="auth=MSCHAPV2") eap_connect(dev[2], apdev[0], "PEAP", "user", password="password", ca_cert="auth_serv/ca.pem", phase1="peapver=0 crypto_binding=0", phase2="auth=MSCHAPV2") def test_ap_wpa2_eap_peap_params(dev, apdev): """WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and various parameters""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PEAP", "user", anonymous_identity="peap", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="peapver=0 peaplabel=1", expect_failure=True) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[1], apdev[0], "PEAP", "user", password="password", ca_cert="auth_serv/ca.pem", phase1="peap_outer_success=1", phase2="auth=MSCHAPV2") eap_connect(dev[2], apdev[0], "PEAP", "user", password="password", ca_cert="auth_serv/ca.pem", phase1="peap_outer_success=2", phase2="auth=MSCHAPV2") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PEAP", identity="user", anonymous_identity="peap", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="peapver=1 peaplabel=1", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=15) if ev is None: raise Exception("No EAP success seen") ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=1) if ev is not None: raise Exception("Unexpected connection") def test_ap_wpa2_eap_peap_eap_tls(dev, apdev): """WPA2-Enterprise connection using EAP-PEAP/EAP-TLS""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PEAP", "cert user", ca_cert="auth_serv/ca.pem", phase2="auth=TLS", ca_cert2="auth_serv/ca.pem", client_cert2="auth_serv/user.pem", private_key2="auth_serv/user.key") eap_reauth(dev[0], "PEAP") def test_ap_wpa2_eap_tls(dev, apdev): """WPA2-Enterprise connection using EAP-TLS""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem", client_cert="auth_serv/user.pem", private_key="auth_serv/user.key") eap_reauth(dev[0], "TLS") def test_ap_wpa2_eap_tls_blob(dev, apdev): """WPA2-Enterprise connection using EAP-TLS and config blobs""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) cert = read_pem("auth_serv/ca.pem") if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")): raise Exception("Could not set cacert blob") cert = read_pem("auth_serv/user.pem") if "OK" not in dev[0].request("SET blob usercert " + cert.encode("hex")): raise Exception("Could not set usercert blob") key = read_pem("auth_serv/user.rsa-key") if "OK" not in dev[0].request("SET blob userkey " + key.encode("hex")): raise Exception("Could not set cacert blob") eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert", client_cert="blob://usercert", private_key="blob://userkey") def test_ap_wpa2_eap_tls_pkcs12(dev, apdev): """WPA2-Enterprise connection using EAP-TLS and PKCS#12""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever") dev[0].request("REMOVE_NETWORK all") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-REQ-PASSPHRASE"]) if ev is None: raise Exception("Request for private key passphrase timed out") id = ev.split(':')[0].split('-')[-1] dev[0].request("CTRL-RSP-PASSPHRASE-" + id + ":whatever") dev[0].wait_connected(timeout=10) def test_ap_wpa2_eap_tls_pkcs12_blob(dev, apdev): """WPA2-Enterprise connection using EAP-TLS and PKCS#12 from configuration blob""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) cert = read_pem("auth_serv/ca.pem") if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")): raise Exception("Could not set cacert blob") with open("auth_serv/user.pkcs12", "rb") as f: if "OK" not in dev[0].request("SET blob pkcs12 " + f.read().encode("hex")): raise Exception("Could not set pkcs12 blob") eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert", private_key="blob://pkcs12", private_key_passwd="whatever") def test_ap_wpa2_eap_tls_neg_incorrect_trust_root(dev, apdev): """WPA2-Enterprise negative test - incorrect trust root""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) cert = read_pem("auth_serv/ca-incorrect.pem") if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")): raise Exception("Could not set cacert blob") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="blob://cacert", wait_connect=False, scan_freq="2412") dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca-incorrect.pem", wait_connect=False, scan_freq="2412") for dev in (dev[0], dev[1]): ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev.wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if "TTLS" not in ev: raise Exception("Unexpected EAP method") ev = dev.wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR", "CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev: raise Exception("TLS certificate error not reported") ev = dev.wait_event(["CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(2) timed out") if "CTRL-EVENT-EAP-FAILURE" not in ev: raise Exception("EAP failure not reported") ev = dev.wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(3) timed out") if "CTRL-EVENT-DISCONNECTED" not in ev: raise Exception("Disconnection not reported") ev = dev.wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10) if ev is None: raise Exception("Network block disabling not reported") def test_ap_wpa2_eap_tls_diff_ca_trust(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", anonymous_identity="ttls", password="password", phase2="auth=PAP", ca_cert="auth_serv/ca.pem", wait_connect=True, scan_freq="2412") id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", anonymous_identity="ttls", password="password", phase2="auth=PAP", ca_cert="auth_serv/ca-incorrect.pem", only_add_network=True, scan_freq="2412") dev[0].request("DISCONNECT") dev[0].dump_monitor() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15) if ev is None: raise Exception("EAP-TTLS not re-started") ev = dev[0].wait_disconnected(timeout=15) if "reason=23" not in ev: raise Exception("Proper reason code for disconnection not reported") def test_ap_wpa2_eap_tls_diff_ca_trust2(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", anonymous_identity="ttls", password="password", phase2="auth=PAP", wait_connect=True, scan_freq="2412") id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", anonymous_identity="ttls", password="password", phase2="auth=PAP", ca_cert="auth_serv/ca-incorrect.pem", only_add_network=True, scan_freq="2412") dev[0].request("DISCONNECT") dev[0].dump_monitor() dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15) if ev is None: raise Exception("EAP-TTLS not re-started") ev = dev[0].wait_disconnected(timeout=15) if "reason=23" not in ev: raise Exception("Proper reason code for disconnection not reported") def test_ap_wpa2_eap_tls_diff_ca_trust3(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", anonymous_identity="ttls", password="password", phase2="auth=PAP", ca_cert="auth_serv/ca.pem", wait_connect=True, scan_freq="2412") dev[0].request("DISCONNECT") dev[0].dump_monitor() dev[0].set_network_quoted(id, "ca_cert", "auth_serv/ca-incorrect.pem") dev[0].select_network(id, freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21"], timeout=15) if ev is None: raise Exception("EAP-TTLS not re-started") ev = dev[0].wait_disconnected(timeout=15) if "reason=23" not in ev: raise Exception("Proper reason code for disconnection not reported") def test_ap_wpa2_eap_tls_neg_suffix_match(dev, apdev): """WPA2-Enterprise negative test - domain suffix mismatch""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca.pem", domain_suffix_match="incorrect.example.com", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if "TTLS" not in ev: raise Exception("Unexpected EAP method") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR", "CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev: raise Exception("TLS certificate error not reported") if "Domain suffix mismatch" not in ev: raise Exception("Domain suffix mismatch not reported") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(2) timed out") if "CTRL-EVENT-EAP-FAILURE" not in ev: raise Exception("EAP failure not reported") ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(3) timed out") if "CTRL-EVENT-DISCONNECTED" not in ev: raise Exception("Disconnection not reported") ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10) if ev is None: raise Exception("Network block disabling not reported") def test_ap_wpa2_eap_tls_neg_domain_match(dev, apdev): """WPA2-Enterprise negative test - domain mismatch""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca.pem", domain_match="w1.fi", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if "TTLS" not in ev: raise Exception("Unexpected EAP method") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR", "CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev: raise Exception("TLS certificate error not reported") if "Domain mismatch" not in ev: raise Exception("Domain mismatch not reported") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(2) timed out") if "CTRL-EVENT-EAP-FAILURE" not in ev: raise Exception("EAP failure not reported") ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(3) timed out") if "CTRL-EVENT-DISCONNECTED" not in ev: raise Exception("Disconnection not reported") ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10) if ev is None: raise Exception("Network block disabling not reported") def test_ap_wpa2_eap_tls_neg_subject_match(dev, apdev): """WPA2-Enterprise negative test - subject mismatch""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca.pem", subject_match="/C=FI/O=w1.fi/CN=example.com", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD", "EAP: Failed to initialize EAP method"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if "EAP: Failed to initialize EAP method" in ev: tls = dev[0].request("GET tls_library") if tls.startswith("OpenSSL"): raise Exception("Failed to select EAP method") logger.info("subject_match not supported - connection failed, so test succeeded") return if "TTLS" not in ev: raise Exception("Unexpected EAP method") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR", "CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev: raise Exception("TLS certificate error not reported") if "Subject mismatch" not in ev: raise Exception("Subject mismatch not reported") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(2) timed out") if "CTRL-EVENT-EAP-FAILURE" not in ev: raise Exception("EAP failure not reported") ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(3) timed out") if "CTRL-EVENT-DISCONNECTED" not in ev: raise Exception("Disconnection not reported") ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10) if ev is None: raise Exception("Network block disabling not reported") def test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev): """WPA2-Enterprise negative test - altsubject mismatch""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) tests = [ "incorrect.example.com", "DNS:incorrect.example.com", "DNS:w1.fi", "DNS:erver.w1.fi" ] for match in tests: _test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev, match) def _test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev, match): dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca.pem", altsubject_match=match, wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD", "EAP: Failed to initialize EAP method"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") if "EAP: Failed to initialize EAP method" in ev: tls = dev[0].request("GET tls_library") if tls.startswith("OpenSSL"): raise Exception("Failed to select EAP method") logger.info("altsubject_match not supported - connection failed, so test succeeded") return if "TTLS" not in ev: raise Exception("Unexpected EAP method") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR", "CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "CTRL-EVENT-EAP-TLS-CERT-ERROR" not in ev: raise Exception("TLS certificate error not reported") if "AltSubject mismatch" not in ev: raise Exception("altsubject mismatch not reported") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS", "CTRL-EVENT-EAP-FAILURE", "CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(2) timed out") if "CTRL-EVENT-EAP-FAILURE" not in ev: raise Exception("EAP failure not reported") ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-DISCONNECTED"], timeout=10) if ev is None: raise Exception("EAP result(3) timed out") if "CTRL-EVENT-DISCONNECTED" not in ev: raise Exception("Disconnection not reported") ev = dev[0].wait_event(["CTRL-EVENT-SSID-TEMP-DISABLED"], timeout=10) if ev is None: raise Exception("Network block disabling not reported") dev[0].request("REMOVE_NETWORK all") def test_ap_wpa2_eap_unauth_tls(dev, apdev): """WPA2-Enterprise connection using UNAUTH-TLS""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "UNAUTH-TLS", "unauth-tls", ca_cert="auth_serv/ca.pem") eap_reauth(dev[0], "UNAUTH-TLS") def test_ap_wpa2_eap_ttls_server_cert_hash(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS and server certificate hash""" check_cert_probe_support(dev[0]) srv_cert_hash = "1477c9cd88391609444b83eca45c4f9f324e3051c5c31fc233ac6aede30ce7cd" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="probe", ca_cert="probe://", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-PEER-CERT depth=0"], timeout=10) if ev is None: raise Exception("No peer server certificate event seen") if "hash=" + srv_cert_hash not in ev: raise Exception("Expected server certificate hash not reported") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "Server certificate chain probe" not in ev: raise Exception("Server certificate probe not reported") dev[0].wait_disconnected(timeout=10) dev[0].request("REMOVE_NETWORK all") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"], timeout=10) if ev is None: raise Exception("EAP result timed out") if "Server certificate mismatch" not in ev: raise Exception("Server certificate mismatch not reported") dev[0].wait_disconnected(timeout=10) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", ca_cert="hash://server/sha256/" + srv_cert_hash, phase2="auth=MSCHAPV2") def test_ap_wpa2_eap_ttls_server_cert_hash_invalid(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS and server certificate hash (invalid config)""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="hash://server/md5/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a", wait_connect=False, scan_freq="2412") dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca", wait_connect=False, scan_freq="2412") dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="DOMAIN\mschapv2 user", anonymous_identity="ttls", password="password", phase2="auth=MSCHAPV2", ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6Q", wait_connect=False, scan_freq="2412") for i in range(0, 3): ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[i].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 21 (TTLS)"], timeout=5) if ev is None: raise Exception("Did not report EAP method initialization failure") def test_ap_wpa2_eap_pwd(dev, apdev): """WPA2-Enterprise connection using EAP-pwd""" check_eap_capa(dev[0], "PWD") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password") eap_reauth(dev[0], "PWD") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[1], apdev[0], "PWD", "pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com", password="secret password", fragment_size="90") logger.info("Negative test with incorrect password") eap_connect(dev[2], apdev[0], "PWD", "pwd user", password="secret-password", expect_failure=True, local_error_report=True) eap_connect(dev[0], apdev[0], "PWD", "pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com", password="secret password", fragment_size="31") def test_ap_wpa2_eap_pwd_groups(dev, apdev): """WPA2-Enterprise connection using various EAP-pwd groups""" check_eap_capa(dev[0], "PWD") params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP", "rsn_pairwise": "CCMP", "ieee8021x": "1", "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" } for i in [ 19, 20, 21, 25, 26 ]: params['pwd_group'] = str(i) hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password") def test_ap_wpa2_eap_pwd_invalid_group(dev, apdev): """WPA2-Enterprise connection using invalid EAP-pwd group""" check_eap_capa(dev[0], "PWD") params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP", "rsn_pairwise": "CCMP", "ieee8021x": "1", "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" } params['pwd_group'] = "0" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PWD", identity="pwd user", password="secret password", scan_freq="2412", wait_connect=False) ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_pwd_as_frag(dev, apdev): """WPA2-Enterprise connection using EAP-pwd with server fragmentation""" check_eap_capa(dev[0], "PWD") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP", "rsn_pairwise": "CCMP", "ieee8021x": "1", "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf", "pwd_group": "19", "fragment_size": "40" } hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password") def test_ap_wpa2_eap_gpsk(dev, apdev): """WPA2-Enterprise connection using EAP-GPSK""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) id = eap_connect(dev[0], apdev[0], "GPSK", "gpsk user", password="abcdefghijklmnop0123456789abcdef") eap_reauth(dev[0], "GPSK") logger.info("Test forced algorithm selection") for phase1 in [ "cipher=1", "cipher=2" ]: dev[0].set_network_quoted(id, "phase1", phase1) ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10) if ev is None: raise Exception("EAP success timed out") dev[0].wait_connected(timeout=10) logger.info("Test failed algorithm negotiation") dev[0].set_network_quoted(id, "phase1", "cipher=9") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10) if ev is None: raise Exception("EAP failure timed out") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "GPSK", "gpsk user", password="ffcdefghijklmnop0123456789abcdef", expect_failure=True) def test_ap_wpa2_eap_sake(dev, apdev): """WPA2-Enterprise connection using EAP-SAKE""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "SAKE", "sake user", password_hex="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef") eap_reauth(dev[0], "SAKE") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "SAKE", "sake user", password_hex="ff23456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef", expect_failure=True) def test_ap_wpa2_eap_eke(dev, apdev): """WPA2-Enterprise connection using EAP-EKE""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) id = eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello") eap_reauth(dev[0], "EKE") logger.info("Test forced algorithm selection") for phase1 in [ "dhgroup=5 encr=1 prf=2 mac=2", "dhgroup=4 encr=1 prf=2 mac=2", "dhgroup=3 encr=1 prf=2 mac=2", "dhgroup=3 encr=1 prf=1 mac=1" ]: dev[0].set_network_quoted(id, "phase1", phase1) ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10) if ev is None: raise Exception("EAP success timed out") dev[0].wait_connected(timeout=10) logger.info("Test failed algorithm negotiation") dev[0].set_network_quoted(id, "phase1", "dhgroup=9 encr=9 prf=9 mac=9") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10) if ev is None: raise Exception("EAP failure timed out") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello1", expect_failure=True) def test_ap_wpa2_eap_ikev2(dev, apdev): """WPA2-Enterprise connection using EAP-IKEv2""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user", password="ike password") eap_reauth(dev[0], "IKEV2") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user", password="ike password", fragment_size="50") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user", password="ike-password", expect_failure=True) def test_ap_wpa2_eap_ikev2_as_frag(dev, apdev): """WPA2-Enterprise connection using EAP-IKEv2 with server fragmentation""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP", "rsn_pairwise": "CCMP", "ieee8021x": "1", "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf", "fragment_size": "50" } hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user", password="ike password") eap_reauth(dev[0], "IKEV2") def test_ap_wpa2_eap_pax(dev, apdev): """WPA2-Enterprise connection using EAP-PAX""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", password_hex="0123456789abcdef0123456789abcdef") eap_reauth(dev[0], "PAX") logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", password_hex="ff23456789abcdef0123456789abcdef", expect_failure=True) def test_ap_wpa2_eap_psk(dev, apdev): """WPA2-Enterprise connection using EAP-PSK""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params["wpa_key_mgmt"] = "WPA-EAP-SHA256" params["ieee80211w"] = "2" hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com", password_hex="0123456789abcdef0123456789abcdef", sha256=True) eap_reauth(dev[0], "PSK", sha256=True) check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-5"), ("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-5") ]) bss = dev[0].get_bss(apdev[0]['bssid']) if 'flags' not in bss: raise Exception("Could not get BSS flags from BSS table") if "[WPA2-EAP-SHA256-CCMP]" not in bss['flags']: raise Exception("Unexpected BSS flags: " + bss['flags']) logger.info("Negative test with incorrect password") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com", password_hex="ff23456789abcdef0123456789abcdef", sha256=True, expect_failure=True) def test_ap_wpa_eap_peap_eap_mschapv2(dev, apdev): """WPA-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2""" params = hostapd.wpa_eap_params(ssid="test-wpa-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="PEAP", identity="user", password="password", phase2="auth=MSCHAPV2", ca_cert="auth_serv/ca.pem", wait_connect=False, scan_freq="2412") eap_check_auth(dev[0], "PEAP", True, rsn=False) hwsim_utils.test_connectivity(dev[0], hapd) eap_reauth(dev[0], "PEAP", rsn=False) check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-50-f2-1"), ("dot11RSNAAuthenticationSuiteSelected", "00-50-f2-1") ]) def test_ap_wpa2_eap_interactive(dev, apdev): """WPA2-Enterprise connection using interactive identity/password entry""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) hapd = hostapd.Hostapd(apdev[0]['ifname']) tests = [ ("Connection with dynamic TTLS/MSCHAPv2 password entry", "TTLS", "ttls", "DOMAIN\mschapv2 user", "auth=MSCHAPV2", None, "password"), ("Connection with dynamic TTLS/MSCHAPv2 identity and password entry", "TTLS", "ttls", None, "auth=MSCHAPV2", "DOMAIN\mschapv2 user", "password"), ("Connection with dynamic TTLS/EAP-MSCHAPv2 password entry", "TTLS", "ttls", "user", "autheap=MSCHAPV2", None, "password"), ("Connection with dynamic TTLS/EAP-MD5 password entry", "TTLS", "ttls", "user", "autheap=MD5", None, "password"), ("Connection with dynamic PEAP/EAP-MSCHAPv2 password entry", "PEAP", None, "user", "auth=MSCHAPV2", None, "password"), ("Connection with dynamic PEAP/EAP-GTC password entry", "PEAP", None, "user", "auth=GTC", None, "password") ] for [desc,eap,anon,identity,phase2,req_id,req_pw] in tests: logger.info(desc) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap=eap, anonymous_identity=anon, identity=identity, ca_cert="auth_serv/ca.pem", phase2=phase2, wait_connect=False, scan_freq="2412") if req_id: ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"]) if ev is None: raise Exception("Request for identity timed out") id = ev.split(':')[0].split('-')[-1] dev[0].request("CTRL-RSP-IDENTITY-" + id + ":" + req_id) ev = dev[0].wait_event(["CTRL-REQ-PASSWORD","CTRL-REQ-OTP"]) if ev is None: raise Exception("Request for password timed out") id = ev.split(':')[0].split('-')[-1] type = "OTP" if "CTRL-REQ-OTP" in ev else "PASSWORD" dev[0].request("CTRL-RSP-" + type + "-" + id + ":" + req_pw) dev[0].wait_connected(timeout=10) dev[0].request("REMOVE_NETWORK all") def test_ap_wpa2_eap_vendor_test(dev, apdev): """WPA2-Enterprise connection using EAP vendor test""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "VENDOR-TEST", "vendor-test") eap_reauth(dev[0], "VENDOR-TEST") def test_ap_wpa2_eap_fast_mschapv2_unauth_prov(dev, apdev): """WPA2-Enterprise connection using EAP-FAST/MSCHAPv2 and unauthenticated provisioning""" check_eap_capa(dev[0], "FAST") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="fast_provisioning=1", pac_file="blob://fast_pac") hwsim_utils.test_connectivity(dev[0], hapd) res = eap_reauth(dev[0], "FAST") if res['tls_session_reused'] != '1': raise Exception("EAP-FAST could not use PAC session ticket") def test_ap_wpa2_eap_fast_pac_file(dev, apdev, params): """WPA2-Enterprise connection using EAP-FAST/MSCHAPv2 and PAC file""" check_eap_capa(dev[0], "FAST") pac_file = os.path.join(params['logdir'], "fast.pac") pac_file2 = os.path.join(params['logdir'], "fast-bin.pac") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) try: eap_connect(dev[0], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="fast_provisioning=1", pac_file=pac_file) with open(pac_file, "r") as f: data = f.read() if "wpa_supplicant EAP-FAST PAC file - version 1" not in data: raise Exception("PAC file header missing") if "PAC-Key=" not in data: raise Exception("PAC-Key missing from PAC file") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", pac_file=pac_file) eap_connect(dev[1], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="fast_provisioning=1 fast_pac_format=binary", pac_file=pac_file2) dev[1].request("REMOVE_NETWORK all") eap_connect(dev[1], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="fast_pac_format=binary", pac_file=pac_file2) finally: subprocess.call(['sudo', 'rm', pac_file]) subprocess.call(['sudo', 'rm', pac_file2]) def test_ap_wpa2_eap_fast_binary_pac(dev, apdev): """WPA2-Enterprise connection using EAP-FAST and binary PAC format""" check_eap_capa(dev[0], "FAST") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", phase1="fast_provisioning=1 fast_max_pac_list_len=1 fast_pac_format=binary", pac_file="blob://fast_pac_bin") res = eap_reauth(dev[0], "FAST") if res['tls_session_reused'] != '1': raise Exception("EAP-FAST could not use PAC session ticket") def test_ap_wpa2_eap_fast_missing_pac_config(dev, apdev): """WPA2-Enterprise connection using EAP-FAST and missing PAC config""" check_eap_capa(dev[0], "FAST") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST", identity="user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", pac_file="blob://fast_pac_not_in_use", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") dev[0].request("REMOVE_NETWORK all") dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST", identity="user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_fast_gtc_auth_prov(dev, apdev): """WPA2-Enterprise connection using EAP-FAST/GTC and authenticated provisioning""" check_eap_capa(dev[0], "FAST") params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "FAST", "user", anonymous_identity="FAST", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=GTC", phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth") hwsim_utils.test_connectivity(dev[0], hapd) res = eap_reauth(dev[0], "FAST") if res['tls_session_reused'] != '1': raise Exception("EAP-FAST could not use PAC session ticket") def test_ap_wpa2_eap_tls_ocsp(dev, apdev): """WPA2-Enterprise connection using EAP-TLS and verifying OCSP""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", ocsp=2) def int_eap_server_params(): params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP", "rsn_pairwise": "CCMP", "ieee8021x": "1", "eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf", "ca_cert": "auth_serv/ca.pem", "server_cert": "auth_serv/server.pem", "private_key": "auth_serv/server.key" } return params def test_ap_wpa2_eap_tls_ocsp_invalid(dev, apdev): """WPA2-Enterprise connection using EAP-TLS and invalid OCSP response""" params = int_eap_server_params() params["ocsp_stapling_response"] = "auth_serv/ocsp-server-cache.der-invalid" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", ocsp=2, wait_connect=False, scan_freq="2412") count = 0 while True: ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"]) if ev is None: raise Exception("Timeout on EAP status") if 'bad certificate status response' in ev: break count = count + 1 if count > 10: raise Exception("Unexpected number of EAP status messages") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_ttls_ocsp_revoked(dev, apdev, params): """WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked""" ocsp = os.path.join(params['logdir'], "ocsp-server-cache-revoked.der") if not os.path.exists(ocsp): raise HwsimSkip("No OCSP response available") params = int_eap_server_params() params["ocsp_stapling_response"] = ocsp hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", ca_cert="auth_serv/ca.pem", anonymous_identity="ttls", password="password", phase2="auth=PAP", ocsp=2, wait_connect=False, scan_freq="2412") count = 0 while True: ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"]) if ev is None: raise Exception("Timeout on EAP status") if 'bad certificate status response' in ev: break if 'certificate revoked' in ev: break count = count + 1 if count > 10: raise Exception("Unexpected number of EAP status messages") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_ttls_ocsp_unknown(dev, apdev, params): """WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked""" ocsp = os.path.join(params['logdir'], "ocsp-server-cache-unknown.der") if not os.path.exists(ocsp): raise HwsimSkip("No OCSP response available") params = int_eap_server_params() params["ocsp_stapling_response"] = ocsp hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", ca_cert="auth_serv/ca.pem", anonymous_identity="ttls", password="password", phase2="auth=PAP", ocsp=2, wait_connect=False, scan_freq="2412") count = 0 while True: ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"]) if ev is None: raise Exception("Timeout on EAP status") if 'bad certificate status response' in ev: break count = count + 1 if count > 10: raise Exception("Unexpected number of EAP status messages") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_ttls_optional_ocsp_unknown(dev, apdev, params): """WPA2-Enterprise connection using EAP-TTLS and OCSP status revoked""" ocsp = os.path.join(params['logdir'], "ocsp-server-cache-unknown.der") if not os.path.exists(ocsp): raise HwsimSkip("No OCSP response available") params = int_eap_server_params() params["ocsp_stapling_response"] = ocsp hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="pap user", ca_cert="auth_serv/ca.pem", anonymous_identity="ttls", password="password", phase2="auth=PAP", ocsp=1, scan_freq="2412") def test_ap_wpa2_eap_tls_domain_suffix_match_cn_full(dev, apdev): """WPA2-Enterprise using EAP-TLS and domain suffix match (CN)""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-no-dnsname.pem" params["private_key"] = "auth_serv/server-no-dnsname.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_suffix_match="server3.w1.fi", scan_freq="2412") def test_ap_wpa2_eap_tls_domain_match_cn(dev, apdev): """WPA2-Enterprise using EAP-TLS and domainmatch (CN)""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-no-dnsname.pem" params["private_key"] = "auth_serv/server-no-dnsname.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_match="server3.w1.fi", scan_freq="2412") def test_ap_wpa2_eap_tls_domain_suffix_match_cn(dev, apdev): """WPA2-Enterprise using EAP-TLS and domain suffix match (CN)""" check_domain_match_full(dev[0]) params = int_eap_server_params() params["server_cert"] = "auth_serv/server-no-dnsname.pem" params["private_key"] = "auth_serv/server-no-dnsname.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_suffix_match="w1.fi", scan_freq="2412") def test_ap_wpa2_eap_tls_domain_suffix_mismatch_cn(dev, apdev): """WPA2-Enterprise using EAP-TLS and domain suffix mismatch (CN)""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-no-dnsname.pem" params["private_key"] = "auth_serv/server-no-dnsname.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_suffix_match="example.com", wait_connect=False, scan_freq="2412") dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_suffix_match="erver3.w1.fi", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") ev = dev[1].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report (2)") def test_ap_wpa2_eap_tls_domain_mismatch_cn(dev, apdev): """WPA2-Enterprise using EAP-TLS and domain mismatch (CN)""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-no-dnsname.pem" params["private_key"] = "auth_serv/server-no-dnsname.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_match="example.com", wait_connect=False, scan_freq="2412") dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS", identity="tls user", ca_cert="auth_serv/ca.pem", private_key="auth_serv/user.pkcs12", private_key_passwd="whatever", domain_match="w1.fi", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") ev = dev[1].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report (2)") def test_ap_wpa2_eap_ttls_expired_cert(dev, apdev): """WPA2-Enterprise using EAP-TTLS and expired certificate""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-expired.pem" params["private_key"] = "auth_serv/server-expired.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="mschap user", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"]) if ev is None: raise Exception("Timeout on EAP certificate error report") if "reason=4" not in ev or "certificate has expired" not in ev: raise Exception("Unexpected failure reason: " + ev) ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_ttls_ignore_expired_cert(dev, apdev): """WPA2-Enterprise using EAP-TTLS and ignore certificate expiration""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-expired.pem" params["private_key"] = "auth_serv/server-expired.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="mschap user", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", phase1="tls_disable_time_checks=1", scan_freq="2412") def test_ap_wpa2_eap_ttls_server_cert_eku_client(dev, apdev): """WPA2-Enterprise using EAP-TTLS and server cert with client EKU""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-eku-client.pem" params["private_key"] = "auth_serv/server-eku-client.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="mschap user", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", wait_connect=False, scan_freq="2412") ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("Timeout on EAP failure report") def test_ap_wpa2_eap_ttls_server_cert_eku_client_server(dev, apdev): """WPA2-Enterprise using EAP-TTLS and server cert with client and server EKU""" params = int_eap_server_params() params["server_cert"] = "auth_serv/server-eku-client-server.pem" params["private_key"] = "auth_serv/server-eku-client-server.key" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="mschap user", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", scan_freq="2412") def test_ap_wpa2_eap_ttls_server_pkcs12(dev, apdev): """WPA2-Enterprise using EAP-TTLS and server PKCS#12 file""" params = int_eap_server_params() del params["server_cert"] params["private_key"] = "auth_serv/server.pkcs12" hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="mschap user", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", scan_freq="2412") def test_ap_wpa2_eap_ttls_dh_params(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "chap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.der", phase2="auth=CHAP", dh_file="auth_serv/dh.conf") def test_ap_wpa2_eap_ttls_dh_params_blob(dev, apdev): """WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params from blob""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dh = read_pem("auth_serv/dh.conf") if "OK" not in dev[0].request("SET blob dhparams " + dh.encode("hex")): raise Exception("Could not set dhparams blob") eap_connect(dev[0], apdev[0], "TTLS", "chap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.der", phase2="auth=CHAP", dh_file="blob://dhparams") def test_ap_wpa2_eap_reauth(dev, apdev): """WPA2-Enterprise and Authenticator forcing reauthentication""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['eap_reauth_period'] = '2' hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", password_hex="0123456789abcdef0123456789abcdef") logger.info("Wait for reauthentication") ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Timeout on reauthentication") ev = dev[0].wait_event(["CTRL-EVENT-EAP-SUCCESS"], timeout=10) if ev is None: raise Exception("Timeout on reauthentication") for i in range(0, 20): state = dev[0].get_status_field("wpa_state") if state == "COMPLETED": break time.sleep(0.1) if state != "COMPLETED": raise Exception("Reauthentication did not complete") def test_ap_wpa2_eap_request_identity_message(dev, apdev): """Optional displayable message in EAP Request-Identity""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['eap_message'] = 'hello\\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com' hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", password_hex="0123456789abcdef0123456789abcdef") def test_ap_wpa2_eap_sim_aka_result_ind(dev, apdev): """WPA2-Enterprise using EAP-SIM/AKA and protected result indication""" check_hlr_auc_gw_support() params = int_eap_server_params() params['eap_sim_db'] = "unix:/tmp/hlr_auc_gw.sock" params['eap_sim_aka_result_ind'] = "1" hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581", phase1="result_ind=1") eap_reauth(dev[0], "SIM") eap_connect(dev[1], apdev[0], "SIM", "1232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581") dev[0].request("REMOVE_NETWORK all") dev[1].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123", phase1="result_ind=1") eap_reauth(dev[0], "AKA") eap_connect(dev[1], apdev[0], "AKA", "0232010000000000", password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123") dev[0].request("REMOVE_NETWORK all") dev[1].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123", phase1="result_ind=1") eap_reauth(dev[0], "AKA'") eap_connect(dev[1], apdev[0], "AKA'", "6555444333222111", password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123") def test_ap_wpa2_eap_too_many_roundtrips(dev, apdev): """WPA2-Enterprise connection resulting in too many EAP roundtrips""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256", eap="TTLS", identity="mschap user", wait_connect=False, scan_freq="2412", ieee80211w="1", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP", fragment_size="10") ev = dev[0].wait_event(["EAP: more than"], timeout=20) if ev is None: raise Exception("EAP roundtrip limit not reached") def test_ap_wpa2_eap_expanded_nak(dev, apdev): """WPA2-Enterprise connection with EAP resulting in expanded NAK""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256", eap="PSK", identity="vendor-test", password_hex="ff23456789abcdef0123456789abcdef", wait_connect=False) found = False for i in range(0, 5): ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") if "refuse proposed method" in ev: found = True break if not found: raise Exception("Unexpected EAP status: " + ev) ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"]) if ev is None: raise Exception("EAP failure timed out") def test_ap_wpa2_eap_sql(dev, apdev, params): """WPA2-Enterprise connection using SQLite for user DB""" try: import sqlite3 except ImportError: raise HwsimSkip("No sqlite3 module available") dbfile = os.path.join(params['logdir'], "eap-user.db") try: os.remove(dbfile) except: pass con = sqlite3.connect(dbfile) with con: cur = con.cursor() cur.execute("CREATE TABLE users(identity TEXT PRIMARY KEY, methods TEXT, password TEXT, remediation TEXT, phase2 INTEGER)") cur.execute("CREATE TABLE wildcards(identity TEXT PRIMARY KEY, methods TEXT)") cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-pap','TTLS-PAP','password',1)") cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-chap','TTLS-CHAP','password',1)") cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-mschap','TTLS-MSCHAP','password',1)") cur.execute("INSERT INTO users(identity,methods,password,phase2) VALUES ('user-mschapv2','TTLS-MSCHAPV2','password',1)") cur.execute("INSERT INTO wildcards(identity,methods) VALUES ('','TTLS,TLS')") cur.execute("CREATE TABLE authlog(timestamp TEXT, session TEXT, nas_ip TEXT, username TEXT, note TEXT)") try: params = int_eap_server_params() params["eap_user_file"] = "sqlite:" + dbfile hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "user-mschapv2", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2") dev[0].request("REMOVE_NETWORK all") eap_connect(dev[1], apdev[0], "TTLS", "user-mschap", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP") dev[1].request("REMOVE_NETWORK all") eap_connect(dev[0], apdev[0], "TTLS", "user-chap", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=CHAP") eap_connect(dev[1], apdev[0], "TTLS", "user-pap", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") finally: os.remove(dbfile) def test_ap_wpa2_eap_non_ascii_identity(dev, apdev): """WPA2-Enterprise connection attempt using non-ASCII identity""" params = int_eap_server_params() hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="\x80", password="password", wait_connect=False) dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="a\x80", password="password", wait_connect=False) for i in range(0, 2): ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") def test_ap_wpa2_eap_non_ascii_identity2(dev, apdev): """WPA2-Enterprise connection attempt using non-ASCII identity""" params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="\x80", password="password", wait_connect=False) dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS", identity="a\x80", password="password", wait_connect=False) for i in range(0, 2): ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10) if ev is None: raise Exception("Association and EAP start timed out") ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10) if ev is None: raise Exception("EAP method selection timed out") def test_openssl_cipher_suite_config_wpas(dev, apdev): """OpenSSL cipher suite configuration on wpa_supplicant""" tls = dev[0].request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("TLS library is not OpenSSL: " + tls) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], params) eap_connect(dev[0], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", openssl_ciphers="AES128", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") eap_connect(dev[1], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", openssl_ciphers="EXPORT", ca_cert="auth_serv/ca.pem", phase2="auth=PAP", expect_failure=True) def test_openssl_cipher_suite_config_hapd(dev, apdev): """OpenSSL cipher suite configuration on hostapd""" tls = dev[0].request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("wpa_supplicant TLS library is not OpenSSL: " + tls) params = int_eap_server_params() params['openssl_ciphers'] = "AES256" hapd = hostapd.add_ap(apdev[0]['ifname'], params) tls = hapd.request("GET tls_library") if not tls.startswith("OpenSSL"): raise HwsimSkip("hostapd TLS library is not OpenSSL: " + tls) eap_connect(dev[0], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") eap_connect(dev[1], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", openssl_ciphers="AES128", ca_cert="auth_serv/ca.pem", phase2="auth=PAP", expect_failure=True) eap_connect(dev[2], apdev[0], "TTLS", "pap user", anonymous_identity="ttls", password="password", openssl_ciphers="HIGH:!ADH", ca_cert="auth_serv/ca.pem", phase2="auth=PAP") def test_wpa2_eap_ttls_pap_key_lifetime_in_memory(dev, apdev, params): """Key lifetime in memory with WPA2-Enterprise using EAP-TTLS/PAP""" p = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") hapd = hostapd.add_ap(apdev[0]['ifname'], p) password = "63d2d21ac3c09ed567ee004a34490f1d16e7fa5835edf17ddba70a63f1a90a25" pid = find_wpas_process(dev[0]) id = eap_connect(dev[0], apdev[0], "TTLS", "pap-secret", anonymous_identity="ttls", password=password, ca_cert="auth_serv/ca.pem", phase2="auth=PAP") time.sleep(0.1) buf = read_process_memory(pid, password) dev[0].request("DISCONNECT") dev[0].wait_disconnected() dev[0].relog() msk = None emsk = None pmk = None ptk = None gtk = None with open(os.path.join(params['logdir'], 'log0'), 'r') as f: for l in f.readlines(): if "EAP-TTLS: Derived key - hexdump" in l: val = l.strip().split(':')[3].replace(' ', '') msk = binascii.unhexlify(val) if "EAP-TTLS: Derived EMSK - hexdump" in l: val = l.strip().split(':')[3].replace(' ', '') emsk = binascii.unhexlify(val) if "WPA: PMK - hexdump" in l: val = l.strip().split(':')[3].replace(' ', '') pmk = binascii.unhexlify(val) if "WPA: PTK - hexdump" in l: val = l.strip().split(':')[3].replace(' ', '') ptk = binascii.unhexlify(val) if "WPA: Group Key - hexdump" in l: val = l.strip().split(':')[3].replace(' ', '') gtk = binascii.unhexlify(val) if not msk or not emsk or not pmk or not ptk or not gtk: raise Exception("Could not find keys from debug log") if len(gtk) != 16: raise Exception("Unexpected GTK length") kck = ptk[0:16] kek = ptk[16:32] tk = ptk[32:48] fname = os.path.join(params['logdir'], 'wpa2_eap_ttls_pap_key_lifetime_in_memory.memctx-') logger.info("Checking keys in memory while associated") get_key_locations(buf, password, "Password") get_key_locations(buf, pmk, "PMK") get_key_locations(buf, msk, "MSK") get_key_locations(buf, emsk, "EMSK") if password not in buf: raise HwsimSkip("Password not found while associated") if pmk not in buf: raise HwsimSkip("PMK not found while associated") if kck not in buf: raise Exception("KCK not found while associated") if kek not in buf: raise Exception("KEK not found while associated") if tk in buf: raise Exception("TK found from memory") if gtk in buf: raise Exception("GTK found from memory") logger.info("Checking keys in memory after disassociation") buf = read_process_memory(pid, password) # Note: Password is still present in network configuration # Note: PMK is in PMKSA cache and EAP fast re-auth data get_key_locations(buf, password, "Password") get_key_locations(buf, pmk, "PMK") get_key_locations(buf, msk, "MSK") get_key_locations(buf, emsk, "EMSK") verify_not_present(buf, kck, fname, "KCK") verify_not_present(buf, kek, fname, "KEK") verify_not_present(buf, tk, fname, "TK") verify_not_present(buf, gtk, fname, "GTK") dev[0].request("PMKSA_FLUSH") dev[0].set_network_quoted(id, "identity", "foo") logger.info("Checking keys in memory after PMKSA cache and EAP fast reauth flush") buf = read_process_memory(pid, password) get_key_locations(buf, password, "Password") get_key_locations(buf, pmk, "PMK") get_key_locations(buf, msk, "MSK") get_key_locations(buf, emsk, "EMSK") verify_not_present(buf, pmk, fname, "PMK") dev[0].request("REMOVE_NETWORK all") logger.info("Checking keys in memory after network profile removal") buf = read_process_memory(pid, password) get_key_locations(buf, password, "Password") get_key_locations(buf, pmk, "PMK") get_key_locations(buf, msk, "MSK") get_key_locations(buf, emsk, "EMSK") verify_not_present(buf, password, fname, "password") verify_not_present(buf, pmk, fname, "PMK") verify_not_present(buf, kck, fname, "KCK") verify_not_present(buf, kek, fname, "KEK") verify_not_present(buf, tk, fname, "TK") verify_not_present(buf, gtk, fname, "GTK") verify_not_present(buf, msk, fname, "MSK") verify_not_present(buf, emsk, fname, "EMSK")