# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.


# Uncomment following two lines and fix the paths if you have installed OpenSSL
# or GnuTLS in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib

# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos

# Example configuration for various cross-compilation platforms

#### sveasoft (e.g., for Linksys WRT54G) ######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
###############################################################################

#### openwrt (e.g., for Linksys WRT54G) #######################################
#CC=mipsel-uclibc-gcc
#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
#CFLAGS += -Os
#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
#	-I../WRT54GS/release/src/include
#LIBS = -lssl
###############################################################################


# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y

# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless

# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
#CFLAGS += -I../madwifi/wpa

# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y

# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y

# Driver interface for Atmel driver
CONFIG_DRIVER_ATMEL=y

# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include

# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y

# Driver interface for Ralink driver
#CONFIG_DRIVER_RALINK=y

# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y

# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib

# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# By default, driver_ndis uses WinPcap for low-level operations. This can be
# replaced with the following option which replaces WinPcap calls with NDISUIO.
# However, this requires that WZC is disabled (net stop wzcsvc) before starting
# wpa_supplicant.
# CONFIG_USE_NDISUIO=y

# Driver interface for development testing
#CONFIG_DRIVER_TEST=y

# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y

# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y

# EAP-MD5
CONFIG_EAP_MD5=y

# EAP-MSCHAPv2
CONFIG_EAP_MSCHAPV2=y

# EAP-TLS
CONFIG_EAP_TLS=y

# EAL-PEAP
CONFIG_EAP_PEAP=y

# EAP-TTLS
CONFIG_EAP_TTLS=y

# EAP-FAST
# Note: Default OpenSSL package does not include support for all the
# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
# to add the needed functions.
#CONFIG_EAP_FAST=y

# EAP-GTC
CONFIG_EAP_GTC=y

# EAP-OTP
CONFIG_EAP_OTP=y

# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y

# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y

# EAP-PAX
#CONFIG_EAP_PAX=y

# LEAP
CONFIG_EAP_LEAP=y

# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y

# EAP-SAKE
#CONFIG_EAP_SAKE=y

# EAP-GPSK
#CONFIG_EAP_GPSK=y
# Include support for optional SHA256 cipher suite in EAP-GPSK
#CONFIG_EAP_GPSK_SHA256=y

# EAP-TNC and related Trusted Network Connect support (experimental)
#CONFIG_EAP_TNC=y

# EAP-IKEv2
#CONFIG_EAP_IKEV2=y

# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y

# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y

# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y

# Development testing
#CONFIG_EAPOL_TEST=y

# Select control interface backend for external programs, e.g, wpa_cli:
# unix = UNIX domain sockets (default for Linux/*BSD)
# udp = UDP sockets using localhost (127.0.0.1)
# named_pipe = Windows Named Pipe (default for Windows)
# y = use default (backwards compatibility)
# If this option is commented out, control interface is not included in the
# build.
CONFIG_CTRL_IFACE=y

# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y

# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y

# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y

# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
# save about 1 kB in code size when building only WPA-Personal (no EAP support)
# or 6 kB if building for WPA-Enterprise.
#CONFIG_NO_WPA2=y

# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
# This option can be used to reduce code size by removing support for
# converting ASCII passphrases into PSK. If this functionality is removed, the
# PSK can only be configured as the 64-octet hexstring (e.g., from
# wpa_passphrase). This saves about 0.5 kB in code size.
#CONFIG_NO_WPA_PASSPHRASE=y

# Remove AES extra functions. This can be used to reduce code size by about
# 1.5 kB by removing extra AES modes that are not needed for commonly used
# client configurations (they are needed for some EAP types).
#CONFIG_NO_AES_EXTRAS=y

# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y

# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
#	path is given on command line, not here; this option is just used to
#	select the backend that allows configuration files to be used)
# winreg = Windows registry (see win_example.reg for an example)
CONFIG_BACKEND=file

# Remove configuration write functionality (i.e., to allow the configuration
# file to be updated based on runtime configuration changes). The runtime
# configuration can still be changed, the changes are just not going to be
# persistent over restarts. This option can be used to reduce code size by
# about 3.5 kB.
#CONFIG_NO_CONFIG_WRITE=y

# Remove support for configuration blobs to reduce code size by about 1.5 kB.
#CONFIG_NO_CONFIG_BLOBS=y

# Select program entry point implementation:
# main = UNIX/POSIX like main() function (default)
# main_winsvc = Windows service (read parameters from registry)
# main_none = Very basic example (development use only)
#CONFIG_MAIN=main

# Select wrapper for operatins system and C library specific functions
# unix = UNIX/POSIX like systems (default)
# win32 = Windows systems
# none = Empty template
#CONFIG_OS=unix

# Select event loop implementation
# eloop = select() loop (default)
# eloop_win = Windows events and WaitForMultipleObject() loop
# eloop_none = Empty template
#CONFIG_ELOOP=eloop

# Select layer 2 packet implementation
# linux = Linux packet socket (default)
# pcap = libpcap/libdnet/WinPcap
# freebsd = FreeBSD libpcap
# winpcap = WinPcap with receive thread
# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
# none = Empty template
#CONFIG_L2_PACKET=linux

# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
CONFIG_PEERKEY=y

# IEEE 802.11w (management frame protection)
# This version is an experimental implementation based on IEEE 802.11w/D1.0
# draft and is subject to change since the standard has not yet been finalized.
# Driver support is also needed for IEEE 802.11w.
#CONFIG_IEEE80211W=y

# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
# internal = Internal TLSv1 implementation (experimental)
# none = Empty template
#CONFIG_TLS=openssl

# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
# even though the core GnuTLS library is released under LGPL, this extra
# library uses GPL and as such, the terms of GPL apply to the combination
# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
# apply for distribution of the resulting binary.
#CONFIG_GNUTLS_EXTRA=y

# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
# and drawbacks of this option.
#CONFIG_INTERNAL_LIBTOMMATH=y
#ifndef CONFIG_INTERNAL_LIBTOMMATH
#LTM_PATH=/usr/src/libtommath-0.39
#CFLAGS += -I$(LTM_PATH)
#LIBS += -L$(LTM_PATH)
#LIBS_p += -L$(LTM_PATH)
#endif
# At the cost of about 4 kB of additional binary size, the internal LibTomMath
# can be configured to include faster routines for exptmod, sqr, and div to
# speed up DH and RSA calculation considerably
#CONFIG_INTERNAL_LIBTOMMATH_FAST=y

# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
# This is only for Windows builds and requires WMI-related header files and
# WbemUuid.Lib from Platform SDK even when building with MinGW.
#CONFIG_NDIS_EVENTS_INTEGRATED=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"

# Add support for DBus control interface
#CONFIG_CTRL_IFACE_DBUS=y

# Add support for loading EAP methods dynamically as shared libraries.
# When this option is enabled, each EAP method can be either included
# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
# be loaded in the beginning of the wpa_supplicant configuration file
# (see load_dynamic_eap parameter in the example file) before being used in
# the network blocks.
#
# Note that some shared parts of EAP methods are included in the main program
# and in order to be able to use dynamic EAP methods using these parts, the
# main program must have been build with the EAP method enabled (=y or =dyn).
# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
# unless at least one of them was included in the main build to force inclusion
# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
# in the main build to be able to load these methods dynamically.
#
# Please also note that using dynamic libraries will increase the total binary
# size. Thus, it may not be the best option for targets that have limited
# amount of memory/flash.
#CONFIG_DYNAMIC_EAP_METHODS=y

# Include client MLME (management frame processing).
# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
# into user space.
#CONFIG_CLIENT_MLME=y
# Currently, driver_devicescape.c build requires some additional parameters
# to be able to include some of the kernel header files. Following lines can
# be used to set these (WIRELESS_DEV must point to the root directory of the
# wireless-dev.git tree).
#WIRELESS_DEV=/usr/src/wireless-dev
#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211

# IEEE Std 802.11r-2008 (Fast BSS Transition)
#CONFIG_IEEE80211R=y

# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
#CONFIG_DEBUG_FILE=y

# Enable privilege separation (see README 'Privilege separation' for details)
#CONFIG_PRIVSEP=y