Commit graph

1966 commits

Author SHA1 Message Date
Jouni Malinen
fe6e56a21a tests: Suite B error cases for PMKID and MIC derivation
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:08:56 +03:00
Jouni Malinen
2ca502dc73 tests: WNM BSS transition management with various PHY types
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 20:57:32 +03:00
Jouni Malinen
803d01901b tests: DFS CAC functionality on channel 104 HT40-
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 20:30:40 +03:00
Jouni Malinen
dd73d9a843 tests: AP Channel Switch - invalid channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
0215543103 tests: Information element parsing OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
4d2c287466 tests: Information element parsing - extra coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
542c68a688 tests: QCA vendor element parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
6849b3de8f tests: Invalid VHT 80 and 80+80 MHz configuration (seg0/seg1)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
8742c81cc5 tests: HT40 co-ex scan and broken legacy/HT AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
ebd80f2d2e tests: HT40 on 5 GHz with disabled secondary channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
07a1e90487 tests: Fix FST cleanup if alloc_fail is not supported
The test cases fst_ap_start_session_oom and fst_setup_mbie_diff did not
clean up FST sessions properly in case alloc_fail failed due to missing
support for it in the build. This could result in abandoning attached
hostapd global control interface monitors and test case failures due to
the global control interface socket running out of output buffer.

Fix this by going through the cleanup steps even if alloc_fail raises
HwsimSkip exception.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
fb915d50fd tests: WNM BSS Transition Management and cfg80211 connect command
For now, this is not enforcing cfg80211 reassociation since the needed
changes do not yet exist in the upstream kernel. Once those changes are
accepted, the TODO note in the test case can be addressed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-25 12:11:59 +02:00
Jouni Malinen
b495500fb1 tests: WNM BSS Transition Management and security mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
71666dc33a tests: Allow RC4-SHA failure in ap_wpa2_eap_fast_cipher_suites
This needs to be allowed with OpenSSL 1.1.0 since the RC4-based cipher
has been disabled by default.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-21 13:12:10 +02:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Janusz Dziedzic
2fa2671573 tests: Add remotehost.py and Host class
This class allows execution of commands on a remote hosts/machine. This
is based on ssh with authorized keys, so you should be able to execute
such commands without any password:

ssh <user>@<hostname> id

By default user is root.

Support for sync and async calls is included.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:24 +02:00
Jouni Malinen
557b52bf4a tests: Add CONFIG_VLAN_NETLINK=y to hostapd build configuration
This is needed for ap_vlan_tagged_wpa2_radius_id_change to pass. The
ioctl-based vlan_add() function does not use the vlan_if_name parameter
at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 19:54:57 +02:00
Jouni Malinen
5a34d359cd tests: Secure mesh network and PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:24:29 +02:00
Jouni Malinen
865fa1e9ea tests: PMKSA cache control interface operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:06:03 +02:00
Jouni Malinen
2b5488a4e1 tests: Return result from WpaSupplicant::global_request() in all cases
The no self.global_iface case was not returning the result from the
self.request() case. While this is not really a path that is supposed to
be used, make it return the response since it is at least theoretically
possible to get here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 11:08:12 +02:00
Jouni Malinen
8c9aa2bc8d tests: wpa_supplicant AP mode - open network and HT disabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-18 16:18:32 +02:00
Jouni Malinen
6c7fed4683 tests: EAP-SIM and check fast reauth with bssid change
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-16 19:46:27 +02:00
Jouni Malinen
8b29661192 tests: Accept "user@example.com" as user identity similarly to "user"
This is needed to allow updated Interworking behavior that adds the
realm to the EAP-Response/Identity value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-11 21:06:15 +02:00
Jouni Malinen
71fd685fb8 tests: Set ocsp_stapling_response_multi in as2.conf
This keeps the as.conf and as2.conf more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-09 19:49:24 +02:00
Jouni Malinen
40ae4a2ff2 tests: Fix root_ocsp() for multi-OCSP test cases
Incorrect path and file name was used in the openssl command to generate
one of the OCSP responses. Also fix
ap_wpa2_eap_tls_intermediate_ca_ocsp_multi to expect success rather than
failure due to OCSP response. Based on the test description, this was
supposed to succeed, but apparently that root_ocsp() bug prevented this
from happening.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-09 19:48:35 +02:00
Johannes Berg
890fd60f7d tests: Add tests for HS 2.0 frame filtering
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-07 11:07:58 +02:00
Bob Copeland
fa7f9570f2 tests: Add a test for mesh gate forwarding
This test checks that mesh nodes forward frames for unknown
destinations to the mesh gates.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2016-03-07 11:05:22 +02:00
Jouni Malinen
dbd183c717 tests: D-Bus AssocStatusCode
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-06 20:54:16 +02:00
Janusz Dziedzic
c0ca24fc30 tests: Add hostapd.py helpers for various radio parameters
Add support for generating hostapd parameters for
b_only/g_only/a_only/HT20/HT40/VHT80.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
e3b36d420e tests: Add terminate support for hostapd/wpa_supplicant
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
4d48d44ca2 tests: Add HostapdGlobal.get_ctrl_iface_port()
This adds a method to get the UDP port for an interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
cb73f7e84d tests: Add UDP ctrl_iface support to hostapd.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
0fd4792b48 tests: Add UDP ctrl_iface support to wpasupplicant.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Ilan Peer
d4b521a38b tests: Handle different delays in discovery_and_interface_disabled
Test different delay intervals between the INTERFACE_DISABLED event
and the INTERFACE_ENABLED event for discovery_and_interface_disabled.

Previously, only a delay of 1 second was used, in which case the
scan results for the P2P_FIND operation were received after the
interface was enabled again, and the case the scan results were
received while the interface was disabled was not covered.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-03-03 17:10:26 +02:00
Jouni Malinen
f1e26f8965 tests: BTM Request Preferred Candidate List followed by vendor element
This goes through parsing code for a case that was interpreted
incorrectly in the past.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-03 17:10:25 +02:00
Jouni Malinen
29b508e7dc tests: WPA2-Enterprise with EAP-GPSK and PTK rekey enforced by AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-02 17:11:38 +02:00
Jouni Malinen
cd18ec3b0a tests: GAS query with another AP while associated
This is without PMF to cover the case of Public Action frame to another
AP while associated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-29 19:49:52 +02:00
Jouni Malinen
9961c70a85 tests: RADIUS Accounting interim update retry
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-29 17:43:13 +02:00
Michael Braun
186ca4736d tests: FT RRB internal delivery to non-WPA BSS
A malicious station could try to do FT-over-DS with a non WPA-enabled
BSS. When this BSS is located in the same hostapd instance, internal RRB
delivery will be used and thus the FT Action Frame will be processed by
a non-WPA enabled BSS. This processing used to crash hostapd as
hapd->wpa_auth is NULL.

This test implements such a malicious request for regression testing.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 17:45:45 +02:00
Michael Braun
a12b30f2d4 tests: RSN pre-auth and PMKSA caching with per_sta_vif
This adds new tests to verify pmksa_cache_preauth when
used with per_sta_vif and possibly vlans.

While at it it refactors the code such that the tests
  pmksa_cache_preauth
  pmksa_cache_preauth_vlan_enabled
  pmksa_cache_preauth_vlan_used
  pmksa_cache_preauth_per_sta_vif
  pmksa_cache_preauth_vlan_enabled_per_sta_vif
  pmksa_cache_preauth_vlan_used_per_sta_vif
share code where possible.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 15:43:24 +02:00
Michael Braun
78bb62b28c tests: Document tshark and python-netifaces as dependencies
tshark and python-netifaces are used by some tests.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 15:25:37 +02:00
Michael Braun
6556ddaf49 tests: Verify correct VLAN operation after reconnect
This adds a test case ap_vlan_reconnect. It connects, disconnects, and
reconnects a station in a VLAN. This tests for a regression with
wpa_group entering the FATAL_FAILURE state as the AP_VLAN interface is
removed before the group was stopped.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 15:25:33 +02:00
Michael Braun
3fdb5005f5 tests: Tagged-VLAN only change on reauthentication
Check VLAN ID change during reauthentication when using tagged-only
configuration.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-27 21:49:27 +02:00
Jouni Malinen
a6d48805f5 tests: P2PS connection with cfg80211 P2P Device
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-27 19:44:11 +02:00
Jouni Malinen
7c7fa52fe1 tests: p2p_device_nfc_invite with no separate group interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-27 19:37:19 +02:00
Jouni Malinen
cd9a0bd02f tests: P2P persistent group with cfg80211 P2P Device
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00
Jouni Malinen
ebbf660ca1 tests: P2P join-group using cfg80211 P2P Device
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00
Jouni Malinen
b17f8f1722 tests: P2P autogo using cfg80211 P2P Device
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00
Jouni Malinen
2335511463 tests: P2P group formation with driver using cfg80211 P2P Device
This extends the P2P Device testing coverage to include the newly
enabled option of using the primary interface (e.g., wlan0) for P2P
group operation instead of always forcing a separate group interface to
be created dynamically.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00