Commit graph

9671 commits

Author SHA1 Message Date
Jouni Malinen
8493fe3457 eapol_test: Add an example controller script for RADIUS testing
This new script can be used as an example of load testing for RADIUS
authentication servers. It can control multiple eapol_test processes
over the control interface to run EAP-TLS authentication. As an example,
the following commands would run eight instances of eapol_test
concurrently:

for i in 0 1 2 3 4 5 6 7; do
    ./eapol_test -T /tmp/eapol_test -i $i > eapol_test.log$i &
done

time ./eapol_test.py --ctrl /tmp/eapol_test --num 8 --iter 100
0: PASS 100
1: PASS 100
2: PASS 100
3: PASS 100
4: PASS 100
5: PASS 100
6: PASS 100
7: PASS 100

real	0m0.339s

time ./eapol_test.py --ctrl /tmp/eapol_test --num 8 --iter 100 --no-fast-reauth
0: PASS 100
1: PASS 100
2: PASS 100
3: PASS 100
4: PASS 100
5: PASS 100
6: PASS 100
7: PASS 100

real	0m1.876s

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-22 00:22:09 +03:00
Jouni Malinen
048d084d45 eapol_test: Add a new operation mode for control interface use
The -T<ctrl_iface> command line argument can now be used to start
eapol_test in mode where the configuration file is not needed and the
authentication operations are started through the control interface.
Network profile is also managed through the control interface in this
case. This can be used to provide more control for scripted RADIUS
authentication server testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-21 00:48:29 +03:00
Jouni Malinen
3b3677b3bc eapol_test: Allow interface name to be specified
The new -i<ifname> command line argument can be used to specify the name
of the interface to use. This is mainly to allow unique control
interface names to be defined without having to use multiple
directories.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-20 23:13:33 +03:00
Jouni Malinen
4c3ae1c0d1 tests: More WPS ER HTTP protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-19 01:36:48 +03:00
Jouni Malinen
0dae8c9974 tests: Skip TLS OCSP stapling test cases with BoringSSL builds
BoringSSL removed the OpenSSL API used to implement OCSP stapling
support.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 20:21:44 +03:00
Jouni Malinen
87c59a1e5a tests: Allow AES-WRAP-192 test cases to be commented out with BoringSSL
BoringSSL does not support 192-bit AES, so these parts of the
wpa_supplicant module tests would fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 20:21:44 +03:00
Jouni Malinen
5f2e454790 tests: Allow group 25 to fail in ap_wpa2_eap_pwd_groups with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full ap_wpa2_eap_pwd_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:52:38 +03:00
Jouni Malinen
db036ed53d tests: Use group 26 instead of 25 in sae_oom_wpas with BoringSSL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:46:56 +03:00
Jouni Malinen
a68d17929b tests: Allow group 25 to fail in sae_groups if running with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full sae_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:43:23 +03:00
Jouni Malinen
355a5c8ec5 OpenSSL: Reject OCSP-required configuration if no OCSP support
This is needed at least with BoringSSL to avoid accepting OCSP-required
configuration with a TLS library that does not support OCSP stapling.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 02:24:06 +03:00
Jouni Malinen
c07e7b43e9 BoringSSL: Fix PKCS12_parse() segfault when used without password
Unlike OpenSSL PKCS12_parse(), the BoringSSL version seems to require
the password pointer to be non-NULL even if no password is present. Map
passwrd == NULL to passwd = "" to avoid a NULL pointer dereference
within BoringSSL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 02:06:02 +03:00
Jouni Malinen
a89beee589 OpenSSL: Handshake completion and resumption state into debug log
This new debug log entry makes it more convenient to check how TLS
handshake was completed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 01:56:05 +03:00
Jouni Malinen
a7803b0caf BoringSSL: Fix session resumption
BoringSSL commit 533ef7304d9b48aad38805f1997031a0a034d7fe ('Remove
SSL_clear calls in handshake functions.') triggered a regression for
EAP-TLS/TTLS/PEAP session resumption in wpa_supplicant due to the
removed SSL_clear() call in ssl3_connect() going away and wpa_supplicant
not calling SSL_clear() after SSL_shutdown(). Fix this by adding the
SSL_clear() call into wpa_supplicant after SSL_shutdown() when preparing
the ssl instance for another connection.

While OpenSSL is still call SSL_clear() in ssl3_connect(), it looks to
be safe to add this call to wpa_supplicant unconditionally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 01:56:05 +03:00
Jouni Malinen
0f56057c64 BoringSSL: Make SSL_set_ssl_method() conditional on EAP-FAST
This function does not seem to be available in BoringSSL. Since it is
needed for EAP-FAST (which is not currently working with BoringSSL),
address this by commenting out the EAP-FAST specific step from builds
that do not include EAP-FAST support.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 01:56:05 +03:00
Jouni Malinen
226cdea6ca BoringSSL: Comment out SSL_build_cert_chain() call
It looks like BoringSSL does include that function even though it claims
support for OPENSSL_VERSION_NUMBER where this is available (1.0.2). For
now, comment out that call to fix build.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 01:56:04 +03:00
Jouni Malinen
812f28b79c BoringSSL: Allow internal AES key wrap to be used with "OpenSSL" build
It looks like BoringSSL has removed the AES_wrap_key(), AES_unwrap_key()
API. This broke wpa_supplicant/hostapd build since those functions from
OpenSSL were used to replace the internal AES key wrap implementation.
Add a new build configuration option
(CONFIG_OPENSSL_INTERNAL_AES_WRAP=y) to allow the internal
implementation to be used with CONFIG_OPENSSL=y build to allow build
against the latest BoringSSL version.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 01:56:02 +03:00
Jouni Malinen
c965ae034a tests: WPS ER protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
35d403096e Set NORMAL_SCAN_REQ on SELECT_NETWORK/ENABLE_NETWORK
wpa_s->scan_req needs to be set in these cases to get correct scanning
behavior. This is mainly needed for starting of AP mode operation
immediately in ap_scan=2 case.

This fixes an issue that was found with mac80211_hwsim test cases in the
following sequence: dbus_autoscan dbus_ap_scan_2_ap_mode_scan

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
035efb2c43 tests: Trigger failure on exceptions in the dbus_p2p_autogo thread
This makes the test case more robust in reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
9c3380d776 Remove duplicated sta_authorized_cb call
Commit 6959145b86 ('FST: Integration into
hostapd') introduced this duplicated call due to an incorrect merge
conflict resolution in ap_sta_set_authorized(). An earlier commit
61fc90483f ('P2P: Handle improper WPS
termination on GO during group formation') had moved this call to an
earlier location in the function and there is no point in re-introducing
another copy of the call at the end of the function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
df1d01cfed tests: WPS and non-WPS AP in single hostapd process
This is a regression test case for WPS_AP_PIN triggered hostapd segfault
when a non-WPS interface was enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 23:14:44 +03:00
Jouni Malinen
e1938ba934 WPS: Fix multi-interface WPS operations in hostapd
Couple of the for-each-interface loops used incorrect return value when
skipping over non-WPS interfaces. This could result in skipping some WPS
interfaces in the loop and returning error. Setting AP PIN did not check
for WPS being enabled at all and trigger a NULL pointer dereference if
non-WPS interface was enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 23:14:44 +03:00
Jouni Malinen
a8fd08f7fc tests: Fix FST tests to remove hostapd instance
These test cases added a new radio for the non-FST AP and while they
removed the radio itself, they did not remove the hostapd instance for
that radio. Remove that to avoid leaving behind invalid instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 22:42:55 +03:00
Jouni Malinen
5c267d718d tests: Fix WPS HTTP test case exceptions
resp.status is an integer, not a string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 21:26:01 +03:00
Jouni Malinen
56906d06c7 WPS ER: Fix SSDP CACHE-CONTROL line parser
Incorrect number of bytes was skipped from the beginning of the line
which resulted in the loop skipping spaces doing nothing. However, the
following operation was simply looking for the max-age parameter with
os_strstr(), so this did not have any effect on functionality. Fix the
number of bytes to skip and remove the unneeded loop to skip spaces.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-15 22:24:15 +03:00
Jouni Malinen
6e9220160c tests: P2P group formation response during p2p_find
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-15 00:15:57 +03:00
Andrei Otcheretianski
d494ca0be4 P2PS: Consider WPS P2PS method when joining a group
If P2PS PD concludes to use default P2PS method wpas_p2p_scan_res_join()
ignores this value and tries to perform a redundant legacy PD.
Fix this by considering WPS_P2PS method too.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-14 23:56:12 +03:00
Mike Gilbert
cda3a40fce systemd: Order wpa_supplicant before network.target
Ordering the units before network.target causes them to be stopped
after network.target on shutdown. This ensures that any network
filesystems will be unmounted before wpa_supplicant is killed.

Adding Wants=network.target ensures that network.target will be included
in the active dependency graph. This is typical of units which are
involved in networking setup functions.

Signed-off-by: Mike Gilbert <floppym@gentoo.org>
2015-08-14 23:16:14 +03:00
Jouni Malinen
6b86872a7c tests: Control interface output buffer limit
This verifies wpa_supplicant behavior in number of cases where the
external program opening a control interface socket does not behave
properly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-14 21:21:00 +03:00
Jouni Malinen
2e95cfc188 Add debug prints for wpa_supplicant ctrl_iface socket send operations
This makes it easier to track the output queue state on a control
interface socket and determine what could be causing issues with running
out of space in the buffer.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-14 21:18:43 +03:00
Kanchanapally, Vidyullatha
ac8757cc35 Android: Use more flexible userid when launching browser popup
It was possible for the Hotspot 2.0 case of OSU user interaction to fail
with wpadebug browser due to permission denial in the "start" command
("java.lang.SecurityException: Permission Denial: startActivity asks to
run as user -2 but is calling from user 0; this requires
android.permission.INTERACT_ACROSS_USERS_FULL"). Avoid this by using
more flexible USER_CURRENT_OR_SELF (-3) value with the --user argument.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 21:14:01 +03:00
Mahesh A Saptasagar
0d0f7ecbb1 Do not stop ongoing PNO sched_scan on association/disconnection
PNO was stopped by the wpa_supplicant during the connection attempts or
while handling disassociation indication. External entities, mainly, the
Android Wi-Fi framework, does not expects PNO to be stopped by other
modules. Hence, do not stop the sched_scan in these scenarios if it is
triggered externally for PNO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 21:10:16 +03:00
Jouni Malinen
76de2b6708 tests: Scan and TSF updates from Beacon/Probe Response frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 21:06:23 +03:00
Srinivas Dasari
75055a538b nl80211: Use beacon TSF if it is newer than Probe Response TSF
cfg80211 sends TSF information with the attribute NL80211_BSS_BEACON_TSF
if the scan results include information from Beacon frame. Probe
Response frame information is included in NL80211_BSS_TSF. If the device
receives only Beacon frames, NL80211_BSS_TSF might not carry updated
TSF, which results an older TSF being used in wpa_supplicant. Fetch both
possible TSF values (if available) and choose the latest TSF for the BSS
entry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 20:58:05 +03:00
Jouni Malinen
708ec753bc tests: ap_scan=2 AP mode operation and scan failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:48:55 +03:00
Jouni Malinen
0a34b62be9 Do not allow ap_scan=2 scan processing to stop AP mode operation
wpa_supplicant_assoc_try() would result in the currently operating AP to
get stopped if wpa_supplicant_scan() ends up getting triggered without
MANUAL_SCAN_REQ while operating an AP. With ap_scan=2, this could
resulted in unintentional stopping of AP mode operations, so check
explicitly for that case and skip the wpa_supplicant_assoc_try() call if
needed to avoid this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:46:38 +03:00
Jouni Malinen
1fbff0b5c4 D-Bus: Set last_scan_req to MANUAL_SCAN_REQ on Scan() trigger paths
The D-Bus Scan() handler was setting wpa_s->scan_req = MANUAL_SCAN_REQ
on the code path that used wpa_supplicant_req_scan(). However, it did
not do anything similar for the cases where
wpa_supplicant_trigger_scan() is called directly. This could result in
unexpected wpa_s->last_scan_req value and incorrect behavior especially
when using ap_scan=2 and running a scan while operating in AP mode. Fix
this by explicitly setting wpa_s->last_scan_req = MANUAL_SCAN_REQ when
using wpa_supplicant_trigger_scan() from the Scan() handler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:44:31 +03:00
Ahmad Kholaif
fbcddaed9a P2P: Support driver preferred freq list for invitation case
When using P2P invitation to re-invoke a persistent P2P group without
specifying the operating channel, query the driver for the preferred
frequency list, and use it to select the operating channel of the group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-11 19:04:45 +03:00
Jouni Malinen
de2a7b796d OpenSSL: Use connection certificate chain with PKCS#12 extra certs
When using OpenSSL 1.0.2 or newer, this replaces the older
SSL_CTX_add_extra_chain_cert() design with SSL_add1_chain_cert() to keep
the extra chain certificates out from SSL_CTX and specific to each
connection. In addition, build and rearrange extra certificates with
SSL_build_cert_chain() to avoid incorrect certificates and incorrect
order of certificates in the TLS handshake.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:27:03 +03:00
Jouni Malinen
0d2c0e6776 OpenSSL: Fix PKCS#12 extra certificate handling
Previously, the possible extra certificate(s) from a PKCS#12 file was
added once for each authentication attempt. This resulted in OpenSSL
concatenating the certificates multiple time (add one copy for each try
during the wpa_supplicant process lifetime). Fix this by clearing the
extra chain certificates before adding new ones when using OpenSSL 1.0.1
or newer that include the needed function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:27:00 +03:00
Jouni Malinen
6da3b745f1 tests: Try users2.pkcs12 twice to add coverage
This allows manual verification of extra PKCS#12 certificate processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:10:15 +03:00
Jouni Malinen
f59b946e39 tests: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK
ap_open_sta_enable_disable verifies that DISABLE_NETWORK that is issued
while connect/sme-connect radio work is pending is effective, i.e.,
prevents connection to disabled network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:49 +03:00
Hu Wang
6108536d7d Drop connection attempt if network is disabled before radio work starts
With the radio work design, it is possible for a network entry to get
disabled (e.g., DISABLE_NETWORK <id>) during the time the connect or
sme-connect radio work waits to start. Previously, only the validity of
the BSS entry and BSSID/SSID was verified when starting the actual
connection step. Add call to wpas_network_disabled() to those checks to
catch the case where the network profile is disabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:19 +03:00
Ahmad Kholaif
8e84921efe P2P: Support driver preferred freq list for Autonomous GO case
When starting an autonomous GO without specifying the operating channel,
query the driver for the preferred frequency list, and use it to select
the operating channel of the GO (if supported).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 21:27:42 +03:00
Ilan Peer
7a2e562396 tests: Properly pass the num of channels to start.sh
The number of channels was not properly passed from the
run-all.sh script to the start.sh script. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-10 21:10:56 +03:00
Jouni Malinen
492f007ec5 tests: Various wpa_supplicant ctrl_iface OOM cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 23:52:43 +03:00
Amit Khatri
6995536fa4 Fix a typo in enum wpa_states comment
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-08-08 23:48:33 +03:00
Jouni Malinen
5a145a55a1 tests: Verify FAIL-BUSY return on SCAN during gas_comeback_delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:52:29 +03:00
Jouni Malinen
ecafa0cf47 tests: RSN element protocol testing for STA side
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:04:07 +03:00
Jouni Malinen
3bc25adbbc Fix PMKID addition to RSN element when RSN Capabilities are not present
This code path could not be hit with the RSNE generated by hostapd or
wpa_supplicant, but it is now possible to reach when using
own_ie_override test functionality. The RSNE and IE buffer length were
not updated correct in case wpa_insert_pmkid() had to add the RSN
Capabilities field.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 19:21:38 +03:00