Commit graph

263 commits

Author SHA1 Message Date
Jouni Malinen
e105110f40 tests: Use a helper function for DPP_CONFIGURATOR_ADD/REMOVE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
5725b3e355 tests: Use a helper function for DPP_AUTH_INIT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
6d196e5928 tests: Helper functions for DPP PKEX initiator and responder
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 20:57:58 +02:00
Jouni Malinen
7e0091007c tests: Use helper function for DPP_LISTEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 18:19:58 +02:00
Jouni Malinen
e01a492caa tests: Helper function for DISCONNECT + ABORT_SCAN + wait
Use a helper function to perform this common sequence to disconnect and
stop any possibly started reconnection attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 17:58:33 +02:00
Jouni Malinen
3a88b7e6e9 tests: Split event wait in grpform_cred_ready_timeout
The long wait for the monitor socket events resulted in another socket
running out of TX buffer space. Split the wait into smaller segments and
clear the other socket in each iteration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 16:08:53 +02:00
Jouni Malinen
b21540e682 tests: Close wpa_supplicant control interface more robustly
Some of the test cases left behind attached control interface monitor
sockets that could result in hitting the wpa_supplicant socket TX queue
limit. Try to be a bit more careful about detaching and closing the
sockets to avoid this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 16:08:30 +02:00
Jouni Malinen
4d916a7f3e tests: Fix dump_monitor() without monitor attached
Do not try to dump pending event messages if the monitor socket has not
been attached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 12:22:23 +02:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
043a29ecc4 tests: Clear pending monitor events before starting scan
The wait_event() call for scan completion could have processed a
previously received event from a prior scan instead of the newly started
one. This could result in flush_scan_cache() assuming there are still
results in the cache even though the scan request to clear the cache had
not even be started yet.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 13:51:55 +02:00
Jouni Malinen
a8b8da1132 tests: Python coding style cleanup (pylint3 unneeded-not)
Use more readable "foo not in bar" construction for the couple of places
that did "not foo in bar".

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 11:34:32 +02:00
Jouni Malinen
64766a7783 tests: Make TDLS test case scan clearing more robust
There was a race condition on starting the flush_scan_cache() operations
if a scan happened to be in progress when the test case ended since the
ABORT_SCAN success case did not wait for the pending scan operation to
be completed. Wait for the scan completion event in addition to the
disconnection event if the ABORT_SCAN command is accepted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 23:33:21 +02:00
Jouni Malinen
f4f17e9aa1 tests: check_cert_subject
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-11 14:09:45 +02:00
Jouni Malinen
a5387062e5 tests: Use a helper function for DPP_BOOTSTRAP_GEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 18:13:10 +02:00
Jouni Malinen
0422d06b54 tests: Use a helper function for DPP_QR_CODE commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 16:55:54 +02:00
Masashi Honma
54c58f29c0 tests: Replace str.encode('hex') with binascii.hexlify() for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:34 +02:00
Jouni Malinen
45b0b88f80 tests: Decode command execution output to a str for python3
Need to convert from bytes to str to allow the following string
operations to work with python3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-02 12:51:13 +02:00
Johannes Berg
a2674fd902 tests: wpasupplicant: Refactor code duplication in wait_global_event()
This code is identical to the wait_event() code, except for the
mon/global_mon instance. Create a _wait_event() function that
encapsulates this, and use it for both.

While at it, fix the bug in wait_global_event() where in the case
of not having a global_mon it always returns None.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01 23:02:43 +02:00
Masashi Honma
35d8c2545e tests: Use python3 compatible dict operation
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f dict -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:53:05 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
63a7683b2d tests: Split ap_ft_oom into separate test cases
ap_ft_oom seemed to depend on undesired wpa_supplicant behavior of
trying to do FT protocol even without being ready for reassociation.
This is going to be fixed in wpa_supplicant which would make this test
case fail, so split it into separate test cases for each failure item to
be able to avoid incorrect test failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 23:22:04 +02:00
Jouni Malinen
04e17e5024 tests: Verify that roaming attempts do not get rejected
The previous roam() and roam_over_ds() checks would have ignored failing
association rejection if a consecutive attempt to connect succeeds
within the initial time limit. This can miss incorrect behavior, so
check explicitly for association rejection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 20:27:40 +02:00
Jouni Malinen
ebf25480bb tests: Fix P2P-GROUP-STARTED event parsing for persistent groups
Do not set the 'ip_addr' value from the "[PERSISTENT]" flag.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 11:44:48 +02:00
Sergey Matyukevich
721d8558bc tests: Allow overriding HT STBC capabilities
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2018-12-23 17:25:11 +02:00
Jouni Malinen
99bc57d0d1 tests: Fix mbo_supp_oper_classes after cfg80211 change
The Linux kernel commit 113f3aaa81bd ("cfg80211: Prevent regulatory
restore during STA disconnect in concurrent interfaces") broke the
regulatory clearing attempt in this test case since
cfg80211_is_all_idle() is now returning false due to the AP interface
being up and that results in the Country IE -based regulatory
information not getting cleared back to defaults.

Work around this by stopping the AP interface first so that when the
station interface receives the disconnection, there are no other active
interfaces in the system. In addition, wait for REGDOM event for the
Country IE hint after association to avoid disconnection before the
regulatory events have been fully processed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-22 16:13:14 +02:00
Jouni Malinen
7488e0ade6 tests: Multi-AP association
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-20 12:43:43 +02:00
Mathy Vanhoef
6734ba0c00 tests: OCI validation in the 4-way and group key handshakes (OCV)
Perform detailed tests with OCV enabled, for both the 4-way and group
key handshakes. These tests include establishing a working connection
with OCV enabled, assuring that a STA without OCV enabled can still
connect to a STA with OCV enabled (and vice versa), verifying that
invalid OCI elements get silently ignored, verifying that missing OCI
elements are reported, and so on.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:42:23 +02:00
Jouni Malinen
0a3742950e tests: Extend eap_proto_aka_prime to cover additional AT_KDF cases
Verify that EAP-AKA' client rejects Challenge with an appended AT_KDF
and a modified AT_KDF value during KDF negotiation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-02 15:36:24 +03:00
Jouni Malinen
9a0ae89d62 tests: SAE with Password Identifier
This verifies SAE Password Identifier functionality in both the
infrastructure and mesh BSS cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Jouni Malinen
ad5704631a tests: roaming_consortium_selection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-18 01:12:23 +03:00
Jouni Malinen
ce952ebda0 tests: Hotspot 2.0 connection based on roaming_consortiums match
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:56 +03:00
Jouni Malinen
606ef7d328 tests: SAE with sae_password
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-11 23:24:19 +03:00
Jouni Malinen
8acde197c2 tests: OWE DH groups
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-08 17:12:35 +03:00
Jouni Malinen
61a56c1480 Add group_mgmt network parameter for PMF cipher selection
The new wpa_supplicant network parameter group_mgmt can be used to
specify which group management ciphers (AES-128-CMAC, BIP-GMAC-128,
BIP-GMAC-256, BIP-CMAC-256) are allowed for the network. If not
specified, the current behavior is maintained (i.e., follow what the AP
advertises). The parameter can list multiple space separate ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 17:40:02 +03:00
Jouni Malinen
d350084da8 tests: DPP bootstrapping, authentication, and configuration exchanges
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:59 +03:00
Jouni Malinen
3ed72148b0 tests: cfg80211 connect command with bssid_hint
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-12 00:33:06 +03:00
Jouni Malinen
1c243e402b tests: FILS SK with PFS
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 23:23:09 +02:00
Jouni Malinen
6bb32582df tests: Extend PMKSA output parser to handle FILS Cache Identifier
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:51:48 +02:00
Jouni Malinen
c0dd37f5f8 tests: AP with Probe Response frame sending from hostapd disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-29 12:42:49 +02:00
Jouni Malinen
bb5d761c2e tests: Do not attach wpa_supplicant monitor interface unnecessarily
There is no need to attach the monitor interface was events when issuing
only a single INTERFACES command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 13:56:15 +02:00
Jouni Malinen
10f312d4a6 tests: Use longer timeout in p2p_go_neg_auth_result()
It is possible for the P2P-GROUP-STARTED event to get delayed more than
one second especially when the GO Negotiation responder becomes the P2P
Client and the system is heavily loaded. Increase the default timeout
for the expected success case from 1 to 5 seconds to avoid failing test
cases that would have succeeded if given a bit more time to complete the
exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 12:45:37 +02:00
Jouni Malinen
79124c7ba1 tests: Scan and only_new=1 multiple times
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-10 17:04:08 +02:00
Jouni Malinen
dff690b859 tests: Random MAC address in scans while connected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 22:52:39 +02:00
Jonathan Afek
c7ca843d05 tests: Increase timeout for remote tests
Some operations take longer time on real hardware than on hwsim. This
commit increases two timeouts so that the tests will pass on real
hardware, too.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:12:35 +03:00
Jonathan Afek
67a0d4f94e tests: Increase connection timeouts for remote tests
Use increased timeouts for connect and disconnect since these operations
take a longer time on real harware than they do on hwsim.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:09:36 +03:00
Jouni Malinen
604f559ae4 tests: Hotspot 2.0 and failures during profile configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
e9f2d54f44 tests: Use shell in local cmd_execute() only if needed
The generic cmd_execute() function was introduced in a manner that
converted the argument array to a string and used shell to run the
command unconditionally. This is not really desirable, so move back to
using the command array by default and use the single command string
with a shell only when really needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 21:10:35 +03:00
Jonathan Afek
7fd9fbc27d tests: Add functions to execute shell commands on interface host
Add the feature to execute shell commands on each wpa_supplicant/hostapd
interface host. When executing remote tests the interfaces are not all
on a single host so when executing shell commands the test needs to
execute the command on the host which the interface relevant for the
command is on. This patch enables tests to execute the command on the
relevant host.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-19 23:48:07 +03:00