Commit graph

260 commits

Author SHA1 Message Date
Johannes Berg
283eee8eed gitignore: Clean up a bit
Now that we no longer leave build artifacts outside the build folder, we
can clean up the gitignore a bit. Also move more things to per-folder
files that we mostly had already anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-11 19:32:50 +03:00
Johannes Berg
87098d3324 build: Put archive files into build/ folder too
This is something I hadn't previously done, but there are
cases where it's needed, e.g., building 'wlantest' and then
one of the tests/fuzzing/*/ projects, they use a different
configuration (fuzzing vs. not fuzzing).

Perhaps more importantly, this gets rid of the last thing
that was dumped into the source directories, apart from
the binaries themselves.

Note that due to the use of thin archives, this required
building with absolute paths.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-11 11:16:00 +03:00
Johannes Berg
722138cd25 build: Put object files into build/ folder
Instead of building in the source tree, put most object
files into the build/ folder at the root, and put each
thing that's being built into a separate folder.

This then allows us to build hostapd and wpa_supplicant
(or other combinations) without "make clean" inbetween.

For the tests keep the objects in place for now (and to
do that, add the build rule) so that we don't have to
rewrite all of that with $(call BUILDOBJS,...) which is
just noise there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:51:39 +03:00
Johannes Berg
0430bc8267 build: Add a common-clean target
Clean up in a more common fashion as well, initially for ../src/.

Also add $(Q) to the clean target in src/

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:48:41 +03:00
Johannes Berg
a41a29192e build: Pull common fragments into a build.rules file
Some things are used by most of the binaries, pull them
into a common rule fragment that we can use properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:29 +03:00
Jouni Malinen
0482414743 wlantest: Fix EAPOL-Key Key Data padding removal
The case where a single 0xdd octet without any 0x00 octets is used as
padding was addressed incorrectly and that ended up truncating one octet
of the actual plaintext version of the Key Data value. Fix this by
removing the unnecessary change to the p pointer before calculating the
new length since p is already pointing to one past the last octet of the
full plaintext.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-09-30 00:19:53 +03:00
Brian Norris
22c06de911 wlantest: Avoid heap-overflow on unexpected data
We're doing a sort of bounds check, based on the previous loop, but only
after we've already tried to read off the end.

This squashes some ASAN errors I'm seeing when running the ap_ft hwsim
test module.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-08-22 12:45:09 +03:00
Jouni Malinen
6e47dd04ff wlantest: Fix RSNE check in FT 4-way handshake msg 3/4
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-25 13:42:08 +03:00
Jouni Malinen
b6a3bcffd7 wlantest: Validate FT elements in Reassociation Response frame
Verify that RSNE, MDE, and FTE have valid information in FT
Reassociation Response frames. In addition, decrypt GTK, IGTK, and BIGTK
from the frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-24 00:35:56 +03:00
Jouni Malinen
e10144c910 wlantest: Validate FT elements in Reassociation Request frame
Verify that RSNE, MDE, and FTE have valid information in FT
Reassociation Request frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-24 00:35:53 +03:00
Jouni Malinen
59d9994ac7 wlantest: Store PMK-R1 in STA entry
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 22:01:12 +03:00
Jouni Malinen
bfc4569f89 wlantest: Store PMK-R0 length explicitly
PMK-R0 is not of fixed length, so store its length explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 21:45:20 +03:00
Jouni Malinen
7cd17a4b5e wlantest: Handle FT over-the-DS association state update cleanly
It is expected for the STA entry on the target AP to move directly from
State 1 to State 3 when performing FT over-the-DS (i.e., FT Action
Request/Response frame exchange through the old AP followed by
Reassociation Request/Response frame exchange with the target AP).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 21:11:33 +03:00
Jouni Malinen
d73bbae492 wlantest: Do not include rt library for OS X builds
That is not needed or available by default, so simply drop it from the
build.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-05 18:53:59 +03:00
Jouni Malinen
d4c3964117 wlantest: Link without libwlantest
The ar operations with embedded libraries were not exactly portable
or strictly speaking necessary. Drop that library completely to make
this more portable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-05 18:53:59 +03:00
Jouni Malinen
c25dc978a6 wlantest: Comment out Linux packet socket from OS X build
For now, allow wlantest to be built on OS X without support for
live sniffer capturing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-05 18:53:59 +03:00
Jouni Malinen
e13f836dde wlantest: Comment out ICMP processing from OS X builds
For now, allow this to be compiled without ICMP support.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-05 18:53:59 +03:00
Jouni Malinen
e9db8b59c9 wlantest: Use BSD compatible UDP header struct
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-05 18:53:59 +03:00
Jouni Malinen
116bbf7953 wlantest: Add frame number fo replay detected messages
This makes it easier to find the relevant frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-04 00:06:59 +03:00
Jouni Malinen
c8a3565947 wlantest: Remove duplicate PN/RSC prints from replay cases
The PN and RSC are already printed in the "replay detected" debug
message so there is no point in having separate hexdumps of the same
values immediately after that.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-04 00:04:32 +03:00
Jouni Malinen
3e537313e8 wlantest: Add debug print with frame number for decryption failures
This makes it more convenient to find the frames that could not be
decrypted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-04 00:00:17 +03:00
Jouni Malinen
866c3acb8c wlantest: Do not report decryption failures for WEP keys if no keys
If no WEP keys are available, there is not going to be an attempt to
decrypt the frame, so don't claim decryption failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-03 23:56:10 +03:00
Jouni Malinen
08ac6f807d wlantest: Update PTK after rekeying even if EAPOL-Key msg 4/4 is missing
Update TPTK to PTK if a valid EAPOL-Key msg 2/4 and 3/4 are available,
but 4/4 is missing. This avoids certain cases where the new TK could be
derived, but it was not being used to try to decrypt following encrypted
frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-01 18:46:14 +03:00
Jouni Malinen
0dc58cfa95 wlantest: Do not report decryption keys when checking only zero TK
All the "Failed to decrypt frame" debug prints were confusing since
those were not supposed to be shown unless there were one or more real
TKs available. The recently added check for zero TK added these notes
for that case which is not really correct, so get rid of them.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-01 18:30:33 +03:00
Jouni Malinen
8e467e3cf4 wlantest: Check for zero TK even when the real PTK is not known
This makes it easier to analyze certain encryption issues. Also print
out an error at the default INFO debug verbosity with the frame number.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-23 17:58:43 +02:00
Alexander Wetzel
6ea7a152c6 wlantest: Basic Extended Key ID support
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-16 00:07:20 +02:00
Jouni Malinen
a8d2ca9e23 wlantest: Do not report PMF failure without BSS supporting PMF
Previously, missing CCMP protection on Robust Management frames was
reported based on the STA having indicated MFPC=1. That is not accurate
since the AP/BSS may have MFPC=0. Report this failure only if both the
AP and STA have indicated MFPC=1, i.e., when PMF has been negotiated for
the association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-14 18:20:31 +02:00
Jouni Malinen
80d4122159 wlantest: Detect and report plaintext payload in protected frames
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-14 17:36:41 +02:00
Jouni Malinen
f5f7286ba5 wlantest: Try to decrypt frame with zero TK
If none of the known PTKs have a working TK, check whether an encrypted
frame is encrypted with all zeros TK.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-28 23:18:59 +02:00
Jouni Malinen
f5849f1c7c wlantest: Add more notes about decryption into pcapng
Note the used TK/GTK and KeyID in frame notes when writing decrypted
frames to a PCAPNG file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-28 01:30:00 +02:00
Jouni Malinen
0e3e3a9ab5 wlantest: Update BSS IEs based on EAPOL-Key msg 3/4
If no Beacon or Probe Response frame has been seen in the capture, use
the IEs from EAPOL-Key msg 3/4 to set up BSS information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-28 00:51:07 +02:00
Jouni Malinen
a8a277c169 wlantest: Get STA IEs based on EAPOL-Key msg 2/4 before PTK derivation
The previous implementation tried to update STA IE information based on
EAPOL-Key msg 2/4 to be able to handle captures that do not include the
(Re)Association Request frame. This was not sufficient (OSEN was not
included) and was done too late (the parsed information is needed for
PMK-to-PTK derivation).

Move the IE update step to happen before trying to derive the PTK if no
(Re)Association Request frame has been seen.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-28 00:35:23 +02:00
Jouni Malinen
faf6894f35 wlantest: BIGTK fetching and Beacon protection validation
Fetch the BIGTK from EAPOL-Key msg 3/4 and use it to validate MME in
Beacon frames when the AP uses Beacon protection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-21 19:41:36 +02:00
Jouni Malinen
9a0edf1700 wlantest: Add PTK derivation support with SAE, OWE, DPP
wlantest build did not define build options to determine key management
values for SAE, OWE, and DPP. Add those and the needed SHA512 functions
to be able to decrypt sniffer captures with PMK available from an
external source.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-10 21:58:10 +02:00
Roy Marples
a8b00423ea BSD: Use struct ip rather than struct iphdr
As we define __FAVOR_BSD use the BSD IP header.
Compile tested on NetBSD, DragonFlyBSD, and Linux.

Signed-off-by: Roy Marples <roy@marples.name>
2020-01-02 19:17:10 +02:00
Jouni Malinen
420989085d wlantest: Ethernet interface capture
Allow option (command line argument -e) to capture Ethernet headers
instead of IEEE 802.11 so that wlantest can be used as a replacement for
tcpdump/dumpcap for capturing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 23:16:45 +02:00
Jouni Malinen
722c7d1958 wlantest: Process VLAN tagged Data frames
This allows Data frames to be fully processed for the case where VLAN
tags are used on the wireless link.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-20 23:54:05 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
c38c62ff78 wlantest: Derive PMK-R1 and PTK for FT protocol cases
Track PMK-R0/PMK-R0-Name from the initial mobility domain association
and derive PMK-R1/PTK when the station uses FT protocol. This allows
frames from additional roaming cases to be decrypted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-22 22:14:47 +03:00
Jouni Malinen
b3c43c3c24 wlantest: Allow duplicate frame processing after decryption failure
If a sniffer capture does not include FCS for each frame, but may
included frames with invalid FCS, it would be possible for wlantest to
try to decrypt the first received frame and fail (e.g., due to CCMP MIC
mismatch) because that particular frame was corrupted and then ignore
the following retry of that frame as a duplicate even if that retry has
different payload (e.g., if its reception did not show corruption).

Work around this by skipping duplicate frame detection immediately
following a decryption failure.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-12 22:27:34 +03:00
Jouni Malinen
ecacd9ccd4 DPP2: Extend wpa_pmk_to_ptk() to support extra Z.x component in context
DPP allows Diffie-Hellman exchange to be used for PFS in PTK derivation.
This requires an additional Z.x (x coordinate of the DH shared secret)
to be passed to wpa_pmk_to_ptk(). This commit adds that to the function
and updates all the callers to pass NULL,0 for that part in preparation
of the DPP specific changes to start using this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 01:31:31 +02:00
Lubomir Rintel
5644f0ce3a tests: Remove CONFIG_PEERKEY
The functionality has been removed in commit a0bf1b68c0 ('Remove all
PeerKey functionality').

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-02-25 19:48:49 +02:00
Mathy Vanhoef
dce9621880 OCV: Add wlantest support for indicating OCV
Add wlantest parsing of the OCV RSN cpability flag.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Jouni Malinen
9a33737a0b FT: FTE parsing for SHA384-based AKM
The MIC field is now a variable length field, so make the FTE parser
aware of the two different field lengths.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
994eac7e61 FT: PMK-R0 derivation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
a3e18dbb6a FT: Support variable length keys
This is a step in adding support for SHA384-based FT AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:52 +03:00
Jouni Malinen
97302b39dc wlantest: Try harder to find a STA entry with PTK for 4-address frames
Commit aab6612836 ('wlantest: Search
bss/sta entry more thoroughly for 4-address frames') allowed wlantest to
find a STA entry in this type of cases, but it was still possible for
that STA entry to be the one that has no derived PTK while the STA entry
for the other side of the link might have the derived PTK available.

Extend this BSS/STA selection mechanism to use sta->ptk_set to determine
which STA entry is more useful for decryption, i.e., select the one with
a known PTK.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-08 21:54:40 +02:00
Jouni Malinen
aab6612836 wlantest: Search bss/sta entry more thoroughly for 4-address frames
Previous design worked for the case where only one of the devices was
beaconing, but failed in one direction to find the PTK if both devices
beaconed. Fix this by checking the A1/A2 fields in both directions if
the first pick fails to find the sta entry.

In addition, select the proper rsc value (rsc_tods vs. rsc_fromds) based
on A2 (TA) value for ToDS+FromDS frames to avoid reporting incorrect
replay issues.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-15 02:12:20 +02:00
Jouni Malinen
878723b920 wlantest: Do not ignore RSN/WPA/OSEN element before full BSS info
wlantest used to ignore RSN/WPA/OSEN element in (Re)Association Request
frame if no Beacon frame had been seen from the AP before the
association exchange. This could result in not being able to derive keys
properly. Work around this by skipping that step if the BSS entry is not
yet complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:55:48 +02:00
Jouni Malinen
5420bcf477 wlantest: Remove unnecessary duplication of tk_len from STA entries
The length of the TK is available within struct wpa_ptk, so there is no
need to try to maintain it separately in wlantest.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:54:45 +02:00