Commit graph

485 commits

Author SHA1 Message Date
Max Stepanov
f94e4c20e4 P2PS: Send follow-on PD response only if status is 12
When a follow-on PD request is received, peer should not send a
follow-on PD response except the case when the PD request status value
is 12 (Success: accepted by user). Previously, the wpa_supplicant
implementation behaved differently sending the follow-on PD Response on
any follow-on PD Request.

Fix the issue by adding the following changes:

1. Don't send PD Response if the follow-on PD Request status is
   different than 12 (seeker side).
2. Don't wait for the follow-on PD Response if the follow-on PD
   Request was sent with the status different than 12 (advertiser
   side).
3. If the follow-on PD Request was sent with the status different
   than 12 use the follow-on PD Request ACK as PD completion event
   (advertiser side).
4. Notify ASP about the PD completion by sending P2PS-PROV-DONE with
   the PD Request status (advertiser side).

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
a3de16768b P2P: Cancel extended listen on p2p_flush()
It is expected that p2p_flush() should stop any ongoing p2p operation.
However, this was not the case with extended listen which was not
cancelled on p2p_flush() flows. Fix this, by cancelling the extended
listen in p2p_flush().

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Ilan Peer
c6d7965d25 P2P: Fix the calculation of group common freqs
Previously, the calculation allowed for the same frequency to appear
several times in the result.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-09-25 21:05:42 +03:00
Purushottam Kushwaha
658665551c P2PS: Remove redundant check in for loop
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-08-28 00:22:49 +03:00
Ahmad Kholaif
fbcddaed9a P2P: Support driver preferred freq list for invitation case
When using P2P invitation to re-invoke a persistent P2P group without
specifying the operating channel, query the driver for the preferred
frequency list, and use it to select the operating channel of the group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-11 19:04:45 +03:00
Jouni Malinen
2a098e3668 P2PS: Clean up intended interface address passing to p2ps_prov_complete
Use NULL to indicate if the address is not available instead of fixed
00:00:00:00:00:00. wpas_p2ps_prov_complete() already had code for
converting NULL to that all zeros address for event messages.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:45:15 +03:00
Max Stepanov
93f22b4583 P2PS: Fix PD PIN event notifications
Change P2PS P2P-PROV-SHOW-PIN/P2P-PROV-ENTER-PIN event notifications
on PD Request/Response handling to meet required P2PS behavior.

The new implemented scheme:
1. For a legacy P2P provision discovery the event behavior remains
   without changes
2. P2PS PD, advertiser method: DISPLAY, autoaccept: TRUE:
   Advertiser: SHOW-PIN on PD request replied with a status SUCCESS
   Seeker: ENTER-PIN on PD response received with a status SUCCESS
3. P2PS PD, advertiser method: DISPLAY, autoaccept: FALSE:
   Advertiser: SHOW-PIN on PD request replied with a status
     INFO_CURRENTLY_UNAVAILABLE
   Seeker: ENTER-PIN on Follow-on PD request with a status
     SUCCESS_DEFERRED
4. P2PS PD, advertiser method: KEYPAD, autoaccept: TRUE/FALSE:
   Advertiser: ENTER-PIN on PD request replied with a status
     INFO_CURRENTLY_UNAVAILABLE
   Seeker: SHOW-PIN on PD response received with a status
     INFO_CURRENTLY_UNAVAILABLE

This change in behavior breaks the existing test cases
p2ps_connect_keypad_method_nonautoaccept and
p2ps_connect_display_method_nonautoaccept. Those will be fixed in a
followup commit.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 13:56:01 +03:00
Ilan Peer
5e1f480500 P2P: Add a function to compute the group common freqs
Add a function to compute the group common frequencies, and
use it to update the group_common_frequencies as part of the
channel switch flows.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 00:18:51 +03:00
Andrei Otcheretianski
793ea13e2b Share freq-to-channel conversion function
Add ieee80211_freq_to_channel_ext() conversion function into
ieee802_11_common.c. This function converts freq to channel and
additionally computes operating class, based on provided HT and VHT
parameters.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-08-03 23:55:46 +03:00
Jouni Malinen
3b86d77bae P2P: Silence bogus compiler warnings
It looks like the compiler version used in Android 5.0 warns about
potentially uninitialized oper_freq variable in these debug messages.
That is not really valid since this code path can be reached only if
found != 0 and in such a case, oper_freq is set. Anyway, it seems better
to avoid compiler warnings, so add an unnecessary initialization for
oper_freq for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-01 21:08:11 +03:00
Ahmad Kholaif
6cc364946c P2P: Process preferred frequency list as part of GO Neg Req/Resp
When processing a GO Negotiation Request and Response, if local driver
supports the preferred channel list extension, then:

- Check if peer's preference for operating channel is already included
  in our preferred channel list and if so, take the oper_channel as is.

- If peer's preference for operating channel is not in local device's
  preferred channel list and peer device has provided its preferred
  frequency list in the GO Negotiation Request/Response, then find a
  channel that is common for both preferred channel lists and use it
  for oper_channel.

- If peer's preference for operating channel is not in local device's
  preferred channel list and peer device doesn't use preferred channel
  list extension, i.e., no preferred channel list in GO Negotiation
  Request/Response, then look for a channel that is common for local
  device's preferred channel list and peer's list of supported channels
  and use it for oper_channel.

- In case no common channel is found, use the peer's preference for
  oper_channel as is.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:39 +03:00
Ahmad Kholaif
fc71f7d99d P2P: Expose driver preferred frequency list fetch to P2P
This adds a callback function that can be used from the P2P module to
request the current preferred list of operating channels from the
driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Ahmad Kholaif
0ef54bd30e P2P: Do not omit known operating channel preference from GO Neg Resp
Add an extra condition to omit operating channel preference when
building GO Negotiation Response. If the local device supports the
preferred frequency list extension, then when sending a GO Negotiation
Response frame, advertise the preferred operating channel unless local
device is assuming the P2P Client role and has an empty preferred
frequency list, in which case local device can omit its preference for
the operating channel.

This change helps make use of the preferred frequency list and the
calculated best channel for both negotiating parties of the P2P
connection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Ahmad Kholaif
def8f7035d P2P: Parse preferred frequency list extension
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Ahmad Kholaif
b841cf2fa6 P2P: Add preferred frequency list extension to GO Neg Req
When sending a GO Negotiation Request, advertise the preferred frequency
list in a new vendor specific IE. This can be used to extend the
standard P2P behavior where a single preferred channel can be advertised
by allowing a priority list of channels to be indicated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Ahmad Kholaif
370017d968 P2P: Use preferred frequency list from the local driver
If the driver supports the preferred frequency list extension, use this
information from the driver when no explicitly configured preference
list (p2p_pref_chan) is present for P2P operating channel selection.
This commit adds this for GO Negotiation and Invitation use cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Max Stepanov
88f3d7c980 P2PS: Add feature capability to PD events
Report the feature capability on P2PS-PROV-START and P2PS-PROV-DONE
ctrl-iface events. A feature capability value is specified as
'feature_cap=<hex>' event parameter, where <val> is a hexadecimal
string of feature capability bytes in a PD Response frame.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
c3ddf2c798 P2PS: Add CPT handling on PD request and response
On PD Request/follow-on PD Request preparation set a feature capability
CPT value of PD context.

On PD Request processing use a request CPT and service advertisement
CPT priority list to select a feature capability CPT of PD Response.

On follow-on PD Request processing use a request CPT and a CPT priority
list in PD context to select a CPT value of follow on PD Response.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
0670de74ae P2PS: Add CPT parameter to P2PS_PROVISION and P2PS_PROVISION_RESP
Add a parameter allowing to specify a value of Coordination
Protocol Transport to P2PS_PROVISION and P2PS_PROVISION_RESP commands.

Extend the p2ps_provision structure to contain cpt_priority and
cpt_mask properties and initialize them on a P2PS PD request command.

The format of the parameter:
    cpt=<cpt>[:cpt]

where <cpt> is CPT name e.g. UDP or MAC. The CPT names are listed
according to their preferences to be used for a specific P2PS session.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
e2b7fbf2fb P2PS: Add CPT parameter to P2P_SERVICE_ADD asp command
Add Coordination Transport Protocol parameter to P2P_SERVICE_ADD
asp command.

Extend p2ps_advertisement structure to contain CPT priorities
and a supported CPT bitmask.

The format of the new parameter:
    cpt=<cpt>[:<cpt>]

where <cpt> is a name of the Coordination Protocol Transport.
This implementation supports two CPT names: UDP and MAC.
The order of specified CPTs defines their priorities where
the first one has the highest priority.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Jouni Malinen
8c0d0ff22e Use a single cleanup timer per wpa_supplicant process
Previously, one timeout per process (by default every 30 seconds) was
used P2P peer expiration and another per-interface timeout (every 10
seconds) was used to expire BSS entries. Merge these to a single
per-process timeout that triggers every 10 seconds to minimize number of
process wakeups due to periodic operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-20 13:28:12 +03:00
Jouni Malinen
85b563f7a4 P2P: Clear p2p->ssid_set on flush
It was possible for the previously set SSID to remain in place between
test cases (e.g., in sequence "p2ps_connect_adv_go_persistent
p2p_set_ssid_postfix") and the P2P SSID postfix not getting used
properly. Make this less likely to occur by clearing the old SSID in
p2p_flush().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 20:32:13 +03:00
Andrei Otcheretianski
b843a8b8a6 P2PS: Save intended interface address after P2PS PD
One possible outcome of the P2PS PD is P2P GO/P2P Client. In this case,
one peer becomes a P2P GO and the P2P Client joins it. Since multiple
GOs may run simultaneously on the same P2P Device, the P2P Client should
join using the intended interface address.

To be able to find the device by the intended interface address, save it
during the PD.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:59:44 +03:00
Andrei Otcheretianski
5cc6ec0f68 P2PS: Set intended interface address correctly for new group
If a device may be an explicit GO, it adds the GO details in the PD
Request. First, we try to reuse an active GO. If it is not present, we
try to reuse a non-active persistent group. In the latter case, if a
dedicated P2P interface is needed, the intended address should be that
of the pending interface. However, the wpas_get_go_info() provided the
ssid->bssid address, which is the address of the P2P device. This might
result in an incorrect intended interface attribute in the PD Request in
case a separate group interface is used.

Fix this by setting group_iface variable to true only if a dedicated
interface should be used and set the attribute accordingly.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:57:07 +03:00
Andrei Otcheretianski
1f14e2bf92 P2PS: Add PD Response validation
Validate the PD Response frame contents more thoroughly when it is used
for P2PS.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:52:38 +03:00
Andrei Otcheretianski
1f1a08b4cc P2PS: Add intended iface address during PD for persistent group
When persistent group is used and the peer is GO in this group,
intended interface attribute should be added to PD request/response.
Not doing so violates the spec.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:41:19 +03:00
Andrei Otcheretianski
223ccebfa3 P2PS: Save wps_prov_info on the responder side
When device A sends PD response to device B, device A should save
wps_prov_info for device B. Not doing so would result in a redundant and
incorrect PD flow, e.g., when upon PROV-DISC-DONE event device B starts
a GO and device A should join it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:26:07 +03:00
Andrei Otcheretianski
2fc866d1bc P2PS: Validate WPS config methods more accurately in PD Request
In case of a P2PS PD, allow keypad, display, and P2PS WPS config
methods. For a legacy PD, allow keypad, display, and pushbutton methods.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:24:01 +03:00
Max Stepanov
ea210b9f8a P2P: Refactor p2p_process_prov_disc_resp() function
Add 'else if' to P2PS status verification to prevent a redundant
condition checking. The first 'if' condition is true only if
  status == P2P_SC_SUCCESS || status == P2P_SC_SUCCESS_DEFERRED.
while the second condition checks:
  status != P2P_SC_SUCCESS &&
  status != P2P_SC_FAIL_INFO_CURRENTLY_UNAVAILABLE &&
  status != P2P_SC_SUCCESS_DEFERRED
Thus, the two conditions are mutually exclusive and 'else if' can be
used if this case.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:21:44 +03:00
Max Stepanov
20f4c3d76b P2P: Delete redundant comparison in p2p_process_prov_disc_resp()
Delete redundant comparison of msg.wps_config_methods with
dev->req_config_methods in p2p_process_prov_disc_resp() since it's
already done early in this function. Also, the second comparison
doesn't make too much sense: it can happen after a possible
p2p_reset_pending_pd() call setting dev->req_config_methods to 0.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 20:20:43 +03:00
Max Stepanov
82d6113502 P2PS: Fix adv_id and adv_mac params of P2P-PROV-DISC-FAILURE
When wpa_supplicant receives a PD Response with reject status it
generated P2P-PROV-DISC-FAILURE event without adv_id and adv_mac
parameters. Fix this by adding these parameters to the
wpas_prov_disc_fail() function call.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-07 19:40:49 +03:00
Stepanov, Max
8c43ef8449 P2PS: Fix attribute addition in p2p_buf_add_service_instance()
Fix a condition when Advertised Service Info Attribute is added to
a probe response in p2p_buf_add_service_instance(). The issue is
that a 'found' value is increased even if 'test' and 'adv->hash' hashes
are different. As result 'found' may have a non-zero value when an
attribute data length is 0. In this cause an empty attribute is about to
be added. Fixing it by eliminating 'found' and checking 'total_len'
containing a real number of bytes added to Advertised Service Info
Attribute.

This fixes an issue from commit 50a9efe713
('P2PS: Fix Probe Response frame building in error cases').

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-06-27 23:54:10 +03:00
Jouni Malinen
a406244395 P2PS: Do not reply to ProbeReq on another channel when starting Listen
It was possible for the P2PS Probe Response frame to go out on the
channel on which a Probe Request frame was reported even when we are
just about to start Listen mode on another channel. This could result in
the peer device using incorrect channel for us. Fix this by skipping the
response in this special case while waiting for Listen mode to start.

This showed up as a hwsim test failure with test sequence "gas_fragment
p2ps_connect_display_method_nonautoaccept" in cases where the dev[0]
Listen channel was not same as the AP operating frequency in the GAS
test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 17:10:19 +03:00
Jouni Malinen
c5ca73d1f7 P2P: Use offsetof() instead of local implementation
The construction used here to figure out the offset of variable length
IEs in Probe Request frames was a bit odd looking and resulted in a
warning from a static analyzer, so replace it with more standard use of
offsetof().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 18:30:11 +03:00
Ben Rosenfeld
6b5147af53 P2P: Fix memory leak in p2p_process_nfc_connection_handover()
p2p_process_nfc_connection_handover() allocates msg memory in the parser
and might return before memory is released if the received message is
not valid.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 01:23:24 +03:00
Jouni Malinen
50a9efe713 P2PS: Fix Probe Response frame building in error cases
org.wi-fi.wfds service is not a replacement for non-WFA service matches.
Do not try to replace the results with that if there is not sufficient
room for the response. Instead, reply with all the matching services
that fit into the message. org.wi-fi.wfds is the first entry in the list
(if matching request/service is present), so it won't get overridden by
other services.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
509f269bbd P2PS: Fix org.wi-fi.wfds matching when building the response
The service hash for org.wi-fi.wfds is supposed to match only if the
device has a WFA defined org.wi-fi.wfds.* service. Verify that before
adding org.wi-fi.wfds to the response.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
5fa5f84324 P2PS: Add more debug prints for service info building
This makes the debug log much more helpful for figuring out results from
service hash matching.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
fdde3db6b8 P2PS: Remove unnecessary service hash filtering from p2p_reply_probe()
Probe Response building is already doing service matching and there is
no need to do this in both places, so simplify the p2p_reply_probe()
implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 18:14:04 +03:00
Jouni Malinen
f2e0eecf09 P2PS: Do not ignore other hashes if org.wi-fi.wfds hash is included
When doing initial processing of Probe Request frame service hashes, the
previous implementation dropped all other hash values if a hash for
org.wi-fi.wfds was included. This is not correct, since that is not a
full wildcard of all services (it only matches WFA defined
org.wi-fi.wfds.* services).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 17:27:31 +03:00
Jouni Malinen
ebdc32f350 P2PS: Fix service hash matching for org.wi-fi.wfds
This "wildcard" match is for WFA specified org.wi-fi.wfds.* services,
not for all services. Verify that there is a really matching service
being advertised instead of assuming this "wildcard" matches if any
services are advertised.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 17:27:31 +03:00
Jouni Malinen
24533f7e81 P2PS: Fix p2p_find handling to allow "wildcard" with other hash values
The org.wi-fi.wfds "wildcard" is not a full wildcard of all service
names and as such, it must not remove other service name hash values
from the Probe Request frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 17:27:31 +03:00
Jouni Malinen
f33a31b06c P2PS: Verify service name length in P2P_FIND command
p2ps_gen_hash() has a limit on service names based on the temporary
buffer from stack. Verify that the service name from the local P2P_FIND
command is short enough to fix into that buffer.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 17:27:30 +03:00
Max Stepanov
83e520e473 P2PS: Add a wildcard with other advertised service info
Quoting P2PS specification: "If multiple Service Hash values are
included in the Probe Request frame, then the ASP shall find a match for
each Service Hash, and it shall send a Probe Response frame with the
information listed in this section for all matched Service Hashes." This
commit changes handling of wildcard hash matching by adding a
wildcard 'org.wi-fi.wfds' info together with the other hash matches.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-18 15:06:54 +03:00
Max Stepanov
c5d3cadbfb P2PS: Re-factor p2p_buf_add_service_instance function
Add auxiliary functions to write a single advertised service info record
into a wpabuf and to find P2PS wildcard hash in a received hash
attribute. Re-factor p2p_buf_add_service_instance() function to allow
adding new wildcard types in future commits.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-18 15:06:48 +03:00
Max Stepanov
e12c4004e4 P2PS: Refactor p2p_data::query_hash and p2p_data::query_count use
Avoid using p2p_data::query_hash for both Probe Request frame processing
and for hashes specified by p2p_find. It's resolved by use of local
query_hash and query_count variables in p2p_reply_probe().

Since p2p_data::query_hash is used only for seek hash values rename
p2p_data::query_hash to p2ps_seek_hash.

Delete p2p_data::query_count since it's not needed anymore.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-15 17:30:01 +03:00
Sunil Dutt
4839da4d4f P2P: Add vendor elements into Invitation Response frames
Commit 86bd36f0d5 ('Add generic mechanism
for adding vendor elements into frames') introduced a mechanism to add
vendor elements into various frames, but missed the addition to the
Invitation Response frame. This commit addresses the same.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-15 14:16:30 +03:00
Max Stepanov
886f583dd7 P2PS: Delete p2ps_svc_found from struct p2p_data
This variable is used locally only in the p2p_reply_probe() function.
The value of this variable is valid only in the context of the single
Probe Request message handling and doesn't make much sense in p2p
context.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Max Stepanov
3f048aa8d2 P2PS: Add a function to free a PD context
Free a PD context with a function encapsulating both os_free() call and
setting a PD context pointer to NULL.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
8f52409972 P2P: Prefer direct Probe Response frames over GO's client list
A P2P Client may be discoverable and reply to Probe Request frames,
while at the same time the P2P GO would also be discoverable and include
the P2P Client information in the P2P Group Info attribute of the Probe
Response frames.

If a seeker constantly hears the Probe Response frames from a P2P Client
and then from the GO, but handles them in the opposite order (due to
scan results ordering), the more valuable Probe Response frame from the
P2P Client will be ignored. Fix this by defining a threshold (1 second)
during which the direct Probe Response frame will be preferred over the
information acquired from the GO and will not be considered as old.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
4e8817f7f0 P2P: Use more precise device timestamping for group clients
When adding group clients to the P2P peer list, use the driver provided
BSS entry timestamp instead of the current time. Otherwise, the time
comparison which is made in p2p_add_device() doesn't make sense.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Andrei Otcheretianski
0799b3f899 P2P: Specify frequency when sending Probe Response frame
If the RX frequency of the Probe Request frame is known, specify it when
sending the Probe Response frame. This is needed when the Probe Request
frame is received on another virtual interface, for example, when a GO
or P2PS client are discoverable on the group operating channel.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Max Stepanov
5143e7ee6e P2P: Fix return value of p2p_reply_probe() and p2p_probe_req_rx()
Return P2P_PREQ_PROCESSED instead of P2P_PREQ_NOT_PROCESSED on
a successful Probe Request frame handling in p2p_reply_probe().

Verify a return value of p2p_reply_probe() in p2p_probe_req_rx()
and continue a pending invitation/connection flow only if the
Probe Request frame is from an expected P2P peer.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Max Stepanov
734ddf6125 P2P: Add rx_freq parameter to Probe Request frame handler
In some cases, Probe Request frames can be received by a peer not only
on a listen channel. In this case an additional rx_freq parameter
explitly contains a Probe Request frame RX frequency. In case rx_freq is
set to 0, a Probe Request frame RX channel is assumed to be our own
listen channel (p2p->cfg->channel).

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Amr BEN ABDESSALEM
0c9fb14ec4 P2P: Add Operating class 125 for P2P supported channels
Add operating class 125 (channels 149..169) to the list of P2P supported
channels. This allows the 5 GHz channels 161 and 169 to be used for P2P
GO when those channels are allowed for AP mode in the current regulatory
domain.

Signed-off-by: Amr BEN ABDESSALEM <amrx.ben.abdessalem@intel.com>
2015-06-12 20:39:49 +03:00
MAYANK HAARIT
aa2b12562b P2P: Add GO Intent of connecting device in GO Negotiation Request event
Add GO Intent information of connecting device in GO Negotiation Request
event which will help applications to decide its own GO intent value in
advance and can avoid failure cases when both devices use GO Intent 15
depending on application requirement.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-06 18:16:39 +03:00
Ilan Peer
9b05135aa4 P2P: Fix association with an AP/P2P GO that is not a P2P manager
Do not add a P2P IE when a station interface is trying to associate
to an AP or P2P GO that publishes a P2P IE but does not include
a P2P manageability attribute.

This addresses an interoperability issue that was reported in
https://bugzilla.kernel.org/show_bug.cgi?id=96471, where a P2P GO
rejects association from a station interface without a specified
reason.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-07 21:00:22 +03:00
Jouni Malinen
6b94f71dcd WPS: Truncate variable length string attributes to maximum length
This enforces variable length strings Manufacturer, Model Name, Model
Number, and Serial Number to be within the maximum length defined in the
WSC specification. While none of the existing users for these within
hostapd/wpa_supplicant had problems with longer strings, it is good to
ensure the strings are not longer to avoid potential issues at higher
layer components.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:12 +03:00
Jouni Malinen
f87c99c787 Simplify DSSS Parameter Set element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the only allowed element length is one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
a65d7495b5 tests: Add p2p-fuzzer
This program can be used to run fuzzing tests for areas related to P2P
message parsing and processing. p2p-fuzzer allows data files to be used
to inject Probe Response and Action frames for processing by the P2P
module.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:19 +03:00
Jouni Malinen
632931c3ce P2P: Use WPS_SEC_DEV_TYPE_MAX_LEN in P2P array definition
This makes it more obvious that the wps_parse_msg() bounds checking is
used to verify that there is sufficient space in the P2P buffer for the
secondary device types.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:19 +03:00
Jouni Malinen
0f5acfba06 Use common is_ctrl_char() helper function
This modifies couple of code segments that replaced control characters
in strings with '_' to use a common helper function.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:19 +03:00
Jouni Malinen
d9d1b9527a Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
This makes the implementation easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
cc6f24380c Add WPS_DEV_NAME_MAX_LEN define and use it when comparing length
This make code easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
dd3d8578d0 P2PS: Check for maximum SSID length in Persistent Group Info
While none of the current users of msg.persistent_ssid{,_len} would have
issues with too long SSID value, it is safer to enforce bounds checking
on the SSID while parsing the attribute to avoid any potential issues in
the future.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
9ed4eee345 P2P: Validate SSID element length before copying it (CVE-2015-1863)
This fixes a possible memcpy overflow for P2P dev->oper_ssid in
p2p_add_device(). The length provided by the peer device (0..255 bytes)
was used without proper bounds checking and that could have resulted in
arbitrary data of up to 223 bytes being written beyond the end of the
dev->oper_ssid[] array (of which about 150 bytes would be beyond the
heap allocation) when processing a corrupted management frame for P2P
peer discovery purposes.

This could result in corrupted state in heap, unexpected program
behavior due to corrupted P2P peer device information, denial of service
due to process crash, exposure of memory contents during GO Negotiation,
and potentially arbitrary code execution.

Thanks to Google security team for reporting this issue and smart
hardware research group of Alibaba security team for discovering it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Max Stepanov
c40a8918ec P2PS: Delete ASP advertisements on wpas_p2p_service_flush
Delete all ASP serice advertisement on wpas_p2p_service_flush similarly
to Bonjour and UPnP services.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
de7c06ee17 P2P: Continue find in GO-Neg-Resp-fail status corner cases
It was possible for the GO Negotiation Response (failure) TX status to
be processed at a point where there is no P2P timeout to continue
search. Avoid stopping the ongoing search operation by explicitly
restarting it from this callback.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Daisuke Niwa
fa9f381f20 P2P: Allow a specific channel to be specified in P2P_FIND
The optional freq=<MHz> can now be used with the P2P_FIND command to
specify a single channel to scan during the first round of P2P search.
For example, this can be used to replace the full initial scan with a
single channel scan of a known operation channel.

Signed-off-by: Daichi Ueura <daichi.ueura@sonymobile.com>
2015-02-28 21:52:56 +02:00
Daichi Ueura
eb78a8d5e3 P2P: Restore P2P_SCAN_SPECIFIC
This reverts commit 3df2f4fe99 ('P2P:
Remove unused P2P_SCAN_SPECIFIC') with a modification to fit the current
code base.

Signed-off-by: Daichi Ueura <daichi.ueura@sonymobile.com>
2015-02-28 21:41:38 +02:00
Jouni Malinen
0d2f324d67 P2P: Fix send_action_in_progress clearing in corner cases
It is possible for an Action frame TX operation to be stopped in a way
that results in the TX status callback function not being called. This
could happen, e.g., when P2P_STOP_FIND was issued while waiting for PD
Response TX status. This specific case ended in leaving
p2p->send_action_in_progress set to 1 and that ending up stopping a
future TX operation when p2p_send_action_cb() gets called with
p2p->pending_action_state == P2P_NO_PENDING_ACTION.

This could result in reception of a fragmented service discovery
response failing due to the GAS sequence getting stopped when receiving
TX callback for the first GAS comeback request. That sequence could be
hit in mac80211_hwsim tests when p2p_listen_and_offchannel_tx was
followed by p2p_service_discovery_fragmentation (even after a long time
since this was on dev1 and there could be even 10 minutes between these
test cases).

Fix this issue by clearing send_action_in_progress whenever stopping
pending P2P operation with p2p_stop_find (or P2P_FLUSH for that matter).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 00:41:27 +02:00
Krishna Vamsi
2c0efd9e49 P2P: Fix stopping on search after SD callback
If p2p_find_timeout triggers after starting SD but before getting TX
status for send action, unwanted search could get triggered again when
TX status arrives though p2p_find_timeout moved the state to P2P_IDLE by
then. p2p_continue_find() would then move the state to P2P_SEARCH again.
Do not trigger the find operation from this context if state is
P2P_IDLE to avoid this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-04 20:46:47 +02:00
Jouni Malinen
abe96d0605 P2P: Clean up Listen channel optimization debug prints
Do not claim to change the Listen channel in a debug message when
previously configured channel prevents this. In addition, fix a typo in
another related debug print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:13:35 +02:00
Krishna Vamsi
ae2dd835be P2PS: Allow PD retry in SEARCH and LISTEN_ONLY also
p2p_timeout_prov_disc_req is getting triggered in P2P_IDLE,
P2P_SEARCH and P2P_LISTEN_ONLY states. Retry logic should not be
limited to only P2P_IDLE state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
0cf12b322d P2PS: Send P2P_FIND_STOPPED event during P2P SD also
During service discovery if P2P_FIND times out, P2P_FIND_STOPPED event
is sent to upper layers to allow follow up P2P_FIND commands. This needs
to be done also in case an SD was in progress during the find operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
9e96e46456 P2PS: PD Response processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
ab8ee776b9 P2PS: Provision Discovery fail event
This extends P2P-PROV-DISC-FAILURE with adv_id and deferred_session_resp
in P2PS cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
1300cc8e8f P2PS: PD Request processing and PD Response building
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
5fefce2747 P2PS: Callback to send P2PS provisioning events
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
9a58e521ac P2PS: Callback to create pending group after sending PD Response
This introduces a P2P module callback function that will be used to
create the pending P2PS group after sending PD Response and receiving
ACK status for it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
895d94def9 P2PS: Callback to remove stale persistent groups
When the peer device is trying to form a new group despite having
old persistent group with same roles, remove the stale persistent
group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
6d9085145c P2PS: Process P2PS provisioning commands
This extends wpas_p2p_prov_disc() implementation to accept P2PS
parameters. None of the callers are yet using this functionality; the
following commit introduces a user.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
369678ad14 P2PS: Add P2PS attributes into PD Request if requested
This adds a data structure for storing P2PS PD information and code to
add the related attributes into PD Request. The actual operation to
trigger this behavior will be added in a separate commit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
59fec34d9c P2PS: Allow p2p_build_ssid() to use pre-set SSID
This is needed to allow P2PS PD to prepare SSID for the group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Krishna Vamsi
6df08d0341 P2PS: Logic to parse GAS requests for ASP services
Add support to parse received GAS requests for ASP services and
prepare GAS responses accordingly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Brian Gix
095b3c4069 P2PS: Add Application Service Info to device found events
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Brian Gix
4660e73213 P2PS: Add Advertised Service Info into Probe Response frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Krishna Vamsi
9e7321eea4 P2PS: Parse Probe Request frames for matching ASP hashes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Krishna Vamsi
ae9d45f329 P2PS: Extend add/del services logic to support ASP
In addition, add a new P2P_SERVICE_REP command that can be used to
replace existing ASP advertisements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Brian Gix
ea8e033e92 P2P: Allow p2p_get_group_num_members() to be called with NULL
This make it easier to use wpa_s->p2p_group without having to check
whether there is a group initialized on this wpa_s instance.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 16:55:45 +02:00
Brian Gix
4f88fc0464 P2PS: WPS changes needed for P2PS default PIN
This provides additional WPS definitions and rules for negotiating use
of P2PS default PIN configuration method.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 16:55:45 +02:00
Brian Gix
1a94b0adcc P2PS: Add service hash to Probe Request frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 16:55:45 +02:00
Brian Gix
5177509657 P2PS: Add option to specify seek strings into P2P_FIND
P2PS seek strings can now be specified in the P2P_FIND control interface
command with one or more optional "seek=<str>" parameters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 16:55:43 +02:00
Krishna Vamsi
5f18501f46 P2PS: Helper functions to build new P2P attributes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 14:09:19 +02:00
Brian Gix
60d11488ff P2PS: Add parsing of new P2P attributes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 14:09:19 +02:00
Jouni Malinen
c5e154c037 P2P: Add P2P state into p2p_send_action_cb() debug entry
This makes it easier to debug issues related to ongoing P2P operations
getting stopped due to Action frame exchanges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 14:09:18 +02:00
Ola Olsson
bff162ac76 P2P: Fix NULL pointer dereference with SD query cancellation
A NULL pointer crash was caused by commit
7139cf4a4f ('P2P: Decrement
sd_pending_bcast_queries when sd returns'). p2p->sd_query can be cleared
to NULL whenever a query is cancelled, even in case the request had
already been transmitted. As such, need to be prepared for the query not
remaining when processing TX status callback for the frame.

Crashes on 2ee98 in following code
2ee90:       f7fc f8b6       bl      2b000 <p2p_dbg>
2ee94:       e02c            b.n     2eef0 <p2p_send_action_cb+0x348>
2ee96:       6c25            ldr     r5, [r4, #64]   ; 0x40
2ee98:       68ee            ldr     r6, [r5, #12]
2ee9a:       b166            cbz     r6, 2eeb6 <p2p_send_action_cb+0x30e>

Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com>
2015-01-22 15:49:37 +02:00
Sunil Dutt
36b5c3335a P2P: Check Invitation Response dialog token match for resend case
Commit ac330cfd87 ('P2P: Reinvite with
social operation channel if no common channels') introduced a mechamisn
to reinvite a peer during a persistent group reinvocation from a GO with
a different operating channel proposal. This mechanism can fail if the
inviting device (GO) ends up getting a retransmitted, duplicated
Invitation Response frame processed second time while waiting for the
response to the retried Invitation Request (using one of the social
channels as the operating channel). IEEE 802.11 duplicate frame
detection mechanisms are supposed to prevent this type of sequence, but
not all drivers support those rules properly for pre-association frames,
including P2P Public Action frames.

Work around this issue by checking that the dialog token in the
Invitation Response frame matches the one from the last Invitation
Request if the special invitation retry mechanism is used. This is safer
to do now than to enable dialog token matching for all invitation cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 16:26:47 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a6306bcc92 P2P: Split p2p_channels_union() into two functions
The separate p2p_channels_union_inplace() makes the function easier for
static analyzers to see that the result buffer is always initialized.
(CID 74494)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:16:32 +02:00