Commit graph

354 commits

Author SHA1 Message Date
Jouni Malinen
fa16028d0f Add generic infrastructure for Probe Request callbacks
Instead of calling specific Probe Request handler functions, use a
generic mechanism that allows multiple callback functions to be
registered for getting notification on receive Probe Request frames.
2009-06-12 18:13:40 +03:00
Jouni Malinen
3fed6f2504 Replace hostapd_wps_probe_req_rx() with more generic ProbeReq notifier
The driver wrappers should not need to include wps_hostapd.h, so let's
make this easier by introducing a driver callback for reporting Probe
Request frames.
2009-06-12 17:31:43 +03:00
Jouni Malinen
36c88ec814 hostapd: EAP-AKA' needs SHA256 2009-05-29 22:35:08 +03:00
Jouni Malinen
8077a80042 Fix STA flag setting for auto-authorization if 802.1X/WPA is not used
The authorized flag needs to be added to the set_flags mask to fix
the flags_or/_and values that are now used with the new nl80211
attribute.
2009-05-28 17:37:47 +03:00
Jouni Malinen
f8e96eb6fd hostapd: Require EAPOL-Key type to match with selected protocol
Previously, we would have allowed both the WPA and RSN EAPOL-Key
types to be used regardless of whether the association is using
WPA or RSN/WPA2. This shouldn't result in any significant problems
on the Authenticator side, but anyway, we should check the type and
ignore the EAPOL-Key frames that used unexpected type.
2009-05-27 09:52:24 +03:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Jouni Malinen
b63303b864 hostapd: Fix internal crypto build without TLS 2009-05-26 17:09:04 +03:00
Jouni Malinen
9f64b827c3 hostapd: Fix non-802.11w build 2009-05-26 17:08:43 +03:00
Jouni Malinen
eddd8010e6 Fix WMM and MFP STA flag setting with flags_or/flags_and
These were included correctly in total_flags, but not in
flags_or/flags_and.
2009-05-11 13:49:57 +03:00
Jouni Malinen
c4e281fd91 Drop unprotected Robust Action frames from MFP STAs
These frames are delivered through mac80211 monitor interface, so we
need to filter them out in hostapd.
2009-05-08 12:51:28 +03:00
Jouni Malinen
92305c5d9a Add more debugging details for SA Query processing 2009-05-06 19:04:01 +03:00
Jouni Malinen
24c9fcebfb Reject hostapd configuration without channel for nl80211 drivers
We could use auto-channel selection here eventually, but for now,
reject the configuration since it is not going to work correctly
(Beacon and Probe Response frames use incorrect value  in DS Params).
2009-05-06 16:07:43 +03:00
Jouni Malinen
617d155547 Add code to re-use an existing ctrl_iface socket file
Port the code from wpa_supplicant to re-use an existing ctrl_iface
socket file if the file does not seem to be in use. This allows
hostapd to recover from unclean shutdown of the control interface.
2009-05-06 11:31:45 +03:00
Jouni Malinen
1fb1a6f0bf Remove unused set_broadcast_ssid() driver op
None of the driver wrappers user this. hostapd-controlled broadcast SSID
hiding can only be used with drivers that use hostapd for handling
Beacon and Probe Request/Response frames.
2009-04-22 16:15:24 +03:00
Jouni Malinen
9351257cfb Remove the unused set_ieee80211d driver op
None of the driver wrappers use this. Only the drivers that use hostapd
for Beacon and Probe Request/Response handling can now use IEEE 802.11d
properly.
2009-04-22 16:11:22 +03:00
Jouni Malinen
f55802e8bf Move default_wep_key variable into EAPOL authenticator data
With this change, eapol_sm.c does not need to dereference main hostapd
structures anymore (i.e., hostapd.h is not needed to be included).
2009-04-22 15:27:51 +03:00
Jouni Malinen
30985b8600 Remove unused set_retry() driver op 2009-04-21 18:01:43 +03:00
Jouni Malinen
61693eaa80 hostapd: Remove unused passive scan functionality
This was not really supported by any of the included driver wrappers. If
this functionality is desired in the future, this (or something similar)
can be added with the changes needed into a driver wrapper to use the
mechanism.
2009-04-17 15:47:37 +03:00
Jouni Malinen
4b9841d34c Move more multi-BSSID processing into drv_callbacks.c
This simplifies driver wrapper operations and removes last direct
struct hostapd_data dereferences from driver_nl80211.c. In addition,
some of the TX callbacks are now fixed for secondary BSSes.
2009-04-17 13:29:29 +03:00
Jouni Malinen
412036f5f0 Provide own_addr buffer in hapd_init() parameters
This reduces number of places in driver wrapper that would need to
dereference struct hostapd_data pointer directly.
2009-04-17 11:55:51 +03:00
Jouni Malinen
731723a5bd Add own_addr as a parameter to sta_deauth() and sta_disassoc()
This fixes deauth/disassoc frames in secondary BSSes when using
multi-BSSID. In addition, it reduces need to dereference
struct hostapd_data inside driver wrappers.
2009-04-17 11:37:22 +03:00
Jouni Malinen
ad1e68e6b5 Clean up HT40 scan and share nl80211 scanning code
Instead of adding a new driver_ops for fetching neighbor BSS data (that
nl80211 driver interface had to scan during initialization), share the
same scan operations that wpa_supplicant is using. This gets rid of
duplicated scan code in driver_nl80211.c (and better yet, removes large
part of old WEXT code).

hostapd interface initialization is now completed in a callback, if
needed, i.e., he_features channel/hw_mode selection can use as much time
as needed. This can also help with radar detection in the future.
2009-04-16 16:22:40 +03:00
Jouni Malinen
b4fd6fab5b Share driver beacon configuration handlers 2009-04-09 23:44:39 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
e785c2ba3b Share same set_country driver op for hostapd and wpa_supplicant 2009-04-09 20:01:25 +03:00
Jouni Malinen
9f324b61ba Share management frame send driver op for hostapd and wpa_supplicant
The same implementation can be shared in most cases, so better share the
same driver_ops handler function.
2009-04-09 19:57:20 +03:00
Jouni Malinen
8342130269 Remove flags parameter from send_mgmt_frame() driver op
This was not documented properly and was not really used nor would it be
suitable to be used in generic way as it was implemented. It is better
to just remove the parameter since there does not seem to be any
reasonable use for it.
2009-04-09 19:42:19 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
acae30ed7b nl80211: Add bridge interfaces from secondary BSSes to ifidx list
This fixes EAPOL RX for secondary BSSes that are in a bridge that does
not match with the bridge used for the primary BSS.
2009-04-03 21:17:23 +03:00
Jouni Malinen
f82ef4d8db nl80211: Fix EAPOL frame RX for secondary BSSes
Need to figure out which BSS should process the frame based on the
source address (STA/Supplicant MAC address).
2009-04-03 21:04:25 +03:00
Jouni Malinen
6143f11705 nl80211: Remove dead code
The EAPOL packet socket is not bound to a specific ifindex, so no need
to setup the address for a bind() call that is not here anyway.
2009-04-03 20:55:19 +03:00
Jouni Malinen
c043aadc40 nl80211: Remove unuset set_privacy() and set_internal_bridge() 2009-04-03 20:44:03 +03:00
Jouni Malinen
515cf93f8c Mark STA authorized if IEEE 802.1X and WPA is not used
This fixes multi-BSS configuration with driver_nl80211.c to mark STAs
that use secondary BSSes with open/static WEP without having to make
driver_nl80211.c track 802.1X configuration for each BSS.
2009-04-03 20:40:07 +03:00
Jouni Malinen
c213cc0433 Fix some multi-BSSID configuration operations
Static WEP keys were configured only for the first BSS. In addition,
STAs were flushed only for the first BSS. These operations should be in
hostapd_setup_bss(), not setup_interface().

Remove extra call to ieee802_11_set_beacon() for the first BSS. This
should only be done from hostapd_setup_bss(), i.e., once for each BSS.
2009-04-03 20:14:39 +03:00
Jouni Malinen
6caf9ca68c Share same hw_feature definitions between hostapd and wpa_supplicant 2009-04-03 19:04:20 +03:00
Jouni Malinen
6de726abb5 Remove unused driver_ops
get_rts, get_frag, get_retry, and set_key_tx_rx_threshold were not used
anywhere, so get rid of them.
2009-04-03 11:59:08 +03:00
Jouni Malinen
a9a2cb5abb Merge wireless_event_{,de}init() into {,de}init() driver op 2009-04-03 11:51:40 +03:00
Jouni Malinen
0915d02c3c wpa_supplicant AP: Add management frame RX for nl80211 2009-04-02 21:59:14 +03:00
Jouni Malinen
f1f54cb8b1 Fix RSN parameter setting for multi-BSS case
rsn_pairwise and wpa_group were set properly only for the last BSS, but
they do need to be set for all BSSes.
2009-04-02 19:54:13 +03:00
Jouni Malinen
74f2ad326f Merge set_dtim_period() into set_beacon()
No need for a separate driver_ops handler for setting DTIM period since
this is always set at the same time with the Beacon data. Beacon
interval is still set separately since it is consider per-radio
parameter (Beacon data and DTIM period are per-BSS parameters).
2009-04-02 16:05:21 +03:00
Jouni Malinen
c0a6190815 Fix SHA-256-based KDF when using CCMP as the pairwise cipher
IEEE 802.11r KDF uses key length in the derivation and as such, the PTK
length must be specified correctly. The previous version was deriving
using 512-bit PTK regardless of the negotiated cipher suite; this works
for TKIP, but not for CCMP. Update the code to use proper PTK length
based on the pairwise cipher.

This fixed PTK derivation for both IEEE 802.11r and IEEE 802.11w (when
using AKMP that specifies SHA-256-based key derivation). The fixed
version does not interoperate with the previous versions. [Bug 307]
2009-04-01 12:04:36 +03:00
Jouni Malinen
6ce4b59342 WPS: Fix hostapd runtime WPS configuration after Enrollee run
If the AP is configured with WPS, we need to update the local WPS data
in order to provide correct credentials for Enrollees.
2009-03-30 18:48:41 +03:00
Jouni Malinen
9c6d8e1db5 Make channel number available to set_freq()
Since we have the channel number, we could as well pass it to the driver
wrapper should there be drivers that use channel number instead of
frequency.
2009-03-30 17:55:37 +03:00
Jouni Malinen
0f2b2c1973 Add needed AP driver wrappers (most of which are still to-do) 2009-03-27 17:13:54 +02:00
Jouni Malinen
c813b69546 Update driver SSID and 802.1X/WPA parameters on configuration reload
This is needed for WPS AP reconfiguration with driver wrappers that do
not use hostapd MLME.
2009-03-27 16:10:14 +02:00
Masashi Honma
871bb568d2 Fix: Loop in driver selection routine
Increment an index variable not 'i' but 'j'.

(this was broken yesterday by a cleanup change
3067ac2bb8)
2009-03-27 10:49:47 +02:00
Jouni Malinen
89111f3bbc Rename struct wpa_driver_ops to hapd_driver_ops
This avoids conflicts with the wpa_supplicant structure with the same
name.
2009-03-26 20:35:49 +02:00
Jouni Malinen
b6a7859d15 Move hostapd_init() into main.c 2009-03-26 19:23:41 +02:00
Jouni Malinen
3067ac2bb8 Get rid of couple of shadowed variable warnings 2009-03-26 19:23:02 +02:00