Commit graph

69 commits

Author SHA1 Message Date
Paul Stewart
dd7fec1f29 wpa_supplicant: Report EAP connection progress to DBus
Send an "EAP" signal via the new DBus interface under various
conditions during EAP authentication:

  - During method selection (ACK and NAK)
  - During certificate verification
  - While sending and receiving TLS alert messages
  - EAP success and failure messages

This provides DBus callers a number of new tools:

  - The ability to probe an AP for available EAP methods
    (given an identity).
  - The ability to identify why the remote certificate was
    not verified.
  - The ability to identify why the remote peer refused
    a TLS connection.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 21:10:01 +03:00
Jouni Malinen
1f0cc27eb9 Remove unused variable if CONFIG_P2P=y is not used
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-28 18:31:01 +03:00
Nirav Shah
cca0060f1e P2P: Cleanup P2PDevice D-Bus interface for hostap-1 release
This patch cleans up the P2PDevice D-Bus interface for the hostap-1
release. A spelling error is corrected and P2PDeviceProperties is
renamed to clarify that this data is configuration data and not the
total collection of Properties for the P2PDevice interface.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-04-14 20:52:59 +03:00
Johannes Berg
2d43d37ff2 DBus: Add ability to report probe requests
Some applications require knowing about probe requests to identify
devices. This can be the case in AP mode to see the devices before they
connect, or even in P2P mode when operating as a P2P device to identify
non-P2P peers (P2P peers are identified via PeerFound signals).

As there are typically a lot of probe requests, require that an
interested application subscribes to this signal so the bus isn't always
flooded with these notifications. The notifications in DBus are then
unicast only to that application.

A small test script is also included.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 21:14:48 +03:00
Mukesh Agrawal
c6e86b63d2 Create DBus getter/setter for ScanInterval
Enable control of wpa_s->scan_interval via D-Bus. This parameter
controls the delay between successive scans for a suitable AP.

Also, update dbus.doxygen with ScanInterval, and some other
parameters that were undocumented.

Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 18:05:22 +03:00
Nirav Shah
024d018b55 Clean up: Replace standard lib methods with os.h ones
Some of the standard lib functions being used directly are redefined in
src/utils/os.h thus providing an abstraction. Change code to use os_*
functions instead of directly using the lib functions.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
2012-03-31 21:13:53 +03:00
Todd Previte
7d39d9c9cc dbus: Make P2P group properties accessible individually
Group properties are now accessible individually. The function to retrieve
the dictionary containing the group properties is removed in favor of the
individual functions. The group member properties are removed as well as
they erroneously retrieved the group properties via the old function.

Signed-hostap: Todd Previte <toddx.a.previte@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-03-05 17:25:08 +02:00
Reinette Chatre
ca29842700 dbus: revert changes to some peer properties
Commit 3f6e50ac28 made it possible to access
P2P peer properties using the org.freedesktop.DBus.Properties interface.

While maintaining the original intent of that patch we make two changes
to it here:

First, 3f6e50ac28 changed the type used to
represent the WPS vendor extension data from bytes to a string. In
addition to the type change the way in which the vendor extension data
was provided to the function creating the string was incorrect and would
not present the correct vendor extension data even in string format.

Revert the type change made in 3f6e50ac28
and present the WPS vendor extension data as an array of an array of
bytes as it was before.

Second, 3f6e50ac28 changes the secondary
device types representation from an array of an array of bytes to an
array of bytes. Revert that change to make secondary device types
accessible via an array of an array of bytes again.

Signed-hostap: Reinette Chatre <reinette.chatre@intel.com>
intended-for: hostap-1
2012-02-25 10:50:13 +02:00
Flávio Ceolin
3f6e50ac28 dbus: Make the P2P peer's properties accessible separately
Since there is the method org.freedesktop.DBus.Properties.GetAll that
returns all properties from a specific interface, it makes more sense to
separate the properties to make it possible to get only a single
property using the method org.freedesktop.DBus.Properties.Get as well.

Signed-hostap: Flávio Ceolin <flavio.ceolin@profusion.mobi>
2012-02-11 11:36:50 +02:00
Paul Stewart
a4bbb6066d dbus: Create DBus getter/setter for FastReauth
Provide a means over DBus to set the conf->fast_reauth
property, which controls whether TLS session resumption
should be attempted for EAP-TLS 802.1X networks.

Signed-off-by: Paul Stewart <pstew@chromium.org>
2012-01-28 11:21:37 +02:00
Jouni Malinen
b3bcc0f519 P2P: Replace p2p_get_peer_info with p2p_peer_known when applicable
p2p_get_peer_info() was used in multiple places just to check whether a
specific peer is known. This was not the designed use for the function,
so introduce a simpler function for that purpose to make it obvious that
the p2p_get_peer_info() function is actually used only in ctrl_iface.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-22 21:04:41 +02:00
Reinette Chatre
e5a359cf7e P2P: Make GO negotiation peer and group information available over D-Bus
The GO negotiation response is very cryptic at the moment. For a success
message we only know on which interface the negotiation succeeded, not
which peer. For a failure we know the interface also and a status code
(number).

It will be very useful for clients to know upon receipt of such a message
which peer the negotiation occurred with.

Now that the peer information is available and the API is changed
already, the function composing the D-Bus message might as well include
all GO negotiation information. This is done with a dict to make things
easier on clients if this result information changes down the line.

Signed-hostap: Reinette Chatre <reinette.chatre@intel.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-18 16:52:33 +02:00
Jouni Malinen
a17539ebcd Remove unnecessary include file inclusion
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 22:13:04 +02:00
Dan Williams
e9c3c1afed Implement control request replies for the D-Bus interface
Add a D-Bus mechanism for clients to respond to the NetworkRequest
signal.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Dan Williams
a9022616ae dbus: Implement EAP SM control request signals
Add a D-Bus signal for EAP SM requests. This signal is emitted on the
Interface object so that clients only have to listen to one object for
requests rather than to all network objects. This signal is analogous
to the socket control interface's CTRL-REQ- request.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Daniel Drake
4483f23e15 dbus: Raise PropertiesChanged on org.freedesktop.DBus.Properties
wpa_supplicant dbus objects are currently difficult to use with
GDBusProxy. This is because they do not follow the dbus standard in
emitting the PropertiesChanged signal on the standard D-Bus properties
interface, so GDBusProxy stores stale property values.

Fix this by raising PropertiesChanged on the standard interface.
For backwards compatibility, the existing custom PropertiesChanged
signals are not removed; I anticipate them being removed in a future
major release.

See
http://lists.freedesktop.org/archives/dbus/2011-August/014593.html
for more info.

Signed-off-by: Daniel Drake <dsd@laptop.org>
2011-10-29 19:26:33 +03:00
Grant Erickson
80267c9cec dbus: Removed unused local variable
Signed-off-by: Grant Erickson <marathon96@gmail.com>
2011-10-23 12:36:04 +03:00
Jouni Malinen
86c6626c5b Remove unnecessary wpa_s == NULL validation
wpa_s cannot be NULL here (it is already dereferenced above and
all the callers pass a valid pointer anyway).
2011-10-16 13:16:21 +03:00
Reinette Chatre
97a8cbb88d D-Bus/P2P: Treat PIN as string
wpa_supplicant returns the PIN in reply to the connect method. Treating
this value as an integer runs the risk of not returning the correct
value if the first digit(s) happens to be a zero(es). To return the
correct PIN it needs to be returned as a string.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Angie Chinchilla <angie.v.chinchilla@intel.com>
2011-09-22 01:17:09 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
3320666494 dbus: Remove separate access variable from properties
The read, write, read-write permissions can be figured out from
getter/setter function pointers, so there is no need for maintaining
that information separately.
2011-08-07 11:16:05 +03:00
Dan Williams
6aeeb6fa21 dbus: clean up new D-Bus interface getters and setters
A number of fixes/improvements here:

1) Remove casting of getter/setter function types which allows
us to change the prototypes in the future and not have hard-to-find
runtime segfaults

2) Instead of having the getters create a fake reply message which
then gets its arguments copied into the real reply message, and is
then disposed, just pass message iters around and have them add
their arguments to the message itself

3) For setters, just pass in the message iter positioned at the
start of the argument list, instead of each setter having to skip
over the standard interface+property name

4) Convert error handling to use DBusError and return the error
back down through the call stacks to the function that will
actually send the error back to the caller, instead of having a
fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then
needs to have the error extracted from it.

But most of all, this fixes various segfaults (like rh #725517
and #678625) which were caused by some functions deep down in the
getter callpaths wanting a source DBusMessage* when the getters were
used for two things: signals (which don't have a source DBusMessage)
and methods (which will have a source DBusMessage that's being
replied to).  This duality made the code fragile when handling
errors like invalid IEs over the air.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 21:25:39 +03:00
Michael Chang
ade74830b4 Add dbus signal for information about server certification
In general, this patch attemps to extend commit
00468b4650 with dbus support.

This can be used by dbus client to implement subject match text
entry with preset value probed from server. This preset value, if
user accepts it, is remembered and passed to subject_match config
for any future authentication.

Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 12:22:32 +03:00
Jayant Sane
b05fe0e557 DBus/P2P: Adding decl for PersistentGroupRemoved signal
Minor - for completeness sake.

Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-07-04 20:24:45 +03:00
Jouni Malinen
7a2b53b4ef Fix D-Bus build without CONFIG_P2P=y 2011-06-27 21:23:22 +03:00
Jayant Sane
3734552f15 P2P: Add WpsFailed signal in P2P D-Bus
Signal is triggered if an error occurs during WPS provisioning phase.

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 11:47:04 +03:00
Jayant Sane
2855070673 P2P: More complete persistent group management over D-Bus
Extend commit c2762e410f to allow
applications to manage (add/remove) persistent groups and accepted
network object paths while invoking a persistent group.
2011-06-24 11:20:19 +03:00
Jayant Sane
c2762e410f P2P: Update D-Bus network object semantics during group formation
Do not emit network objects during P2P group formation since such
network objects can confuse certain apps. Instead, a persistent group
object is created to allow apps to keep track of persistent groups.
Persistent group objects only represent the info needed to recreate the
group.

Also fixes a minor bug in the handling of persistent group objects
during WPS operations.

Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 21:25:13 +03:00
Jouni Malinen
83fa07226d DBus: Fix some typos on comments 2011-06-12 15:09:32 -07:00
Johannes Berg
9abafccc0d DBus: Add support for P2P primitives
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 15:08:19 -07:00
Sam Leffler
9768da202b dbus: Add support to get/set the country code
Add an Interface.Country property and support to get/set the value.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
2011-04-05 01:24:26 +03:00
Sam Leffler
78633c3709 wpa_supplicant: Parameterize BSS table expiration age + count
Replace compile-time BSS cache expiration age and scan count by config
parameters that can be set via wpa_cli and the new D-Bus API. The latter
is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 12:40:59 +02:00
Sam Leffler
7c49fdd0bd dbus: Add RemoveAllNetworks to the new D-Bus API
This adds a new command to the interface to remove all configured
netblocks. Without this it's necessary to query properties on the
interface and explicitly remove each netblock.
2011-03-20 12:12:12 +02:00
Sam Leffler
2b65b30da8 dbus: Add D-Bus methods to flush the BSS cache
Add an "Interface.FlushBSS" method to the new D-Bus API and a "flush"
method to the old API. Both take an age parameter that is a threshold
(in seconds) for selecting entries to evict. Setting this parameter
to zero flushes all entries from the cache.

This mechanism is useful for a connection manager to clear state at
startup and on resume (where the age parameter may be used to hold
onto recent/valid data).
2011-03-20 12:02:33 +02:00
Paul Stewart
5bbf9f1086 Add DBus state change notification for AuthMode property
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:54:59 +02:00
Paul Stewart
ba6f267f64 dbus: Add D-Bus method for current authentication mode
Chooses between EAP and non-EAP authentication modes and
uses the appropriate method to retrieve the name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:56 +02:00
Dan Williams
1e6288df6b dbus: Emit property changed events when adding/removing BSSes
The supplicant was not emitting property changed events when the BSSs
property changed.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2010-12-17 15:56:01 +02:00
Jouni Malinen
7cc5995845 Skip D-Bus signals if the dbus_path is not yet set
This avoids an invalid D-Bus call during interface initialization.
The wpa_state change can happen before the D-Bus interface is set up,
so we must be preparted to handle this early event signal. In theory,
it should be possible to reorder initialization code to make sure
D-Bus signals are ready, but that would likely require quite a bit of
code restructuring, so it looks like a safer option for now is to just
skip the early event.
2010-05-23 20:23:11 +03:00
Witold Sowa
7899e2f42d dbus: Change WPA/RSNIE byte array props to dicts
Expose RSN and WPA properties for BSS objects containing information
about key management and cipher suites. Get rid of WPA/RSN/WPSIE
byte array properties and add IEs byte array property with all IE data
instead.
2010-01-16 16:37:37 +02:00
Witold Sowa
8e5568f874 dbus: Change BSS, Network and some errors interface names
Remove ".Interface" part from BSS and Network objects and some
error names.
2010-01-09 11:41:09 +02:00
Jouni Malinen
c91278a5b4 dbus: Do not try to unregister not-yet-registered network object 2010-01-06 21:31:13 +02:00
Witold Sowa
158c6c7467 dbus: Add BSS property change notifications 2010-01-06 20:03:01 +02:00
Jouni Malinen
6c195cd507 dbus: Fix prop_changed_flags allocation to count properties correctly
There was an extra semicolon that broke the calculation of registered
properties and resulted in obj_desc->prop_changed_flags not being
allocated long enough for all the flags.
2010-01-06 11:55:21 +02:00
Witold Sowa
abd7a4e353 dbus: Aggregate PropertiesChanged signals
Instead of sending PropertiesChanged signals for each changed
property separately, mark properties as changed and send aggregated
PropertiesChanged signals for each interface in each object.
Aggregated PropertiesChanged signal is sent
- for all object after responding on DBus call
- for specified object after manual call to
  wpa_dbus_flush_object_changed_properties() function
- for each object separately after short timeout (currently 5 ms)
  which starts when first property in object is marked changed
2010-01-04 17:15:57 +02:00
Witold Sowa
75d328af50 dbus: Change BSS property MaxRate to Rates
Instead of exposing maximum BSS bit rate, expose sorted array
of all supported rates.
2010-01-04 16:52:30 +02:00
Marcel Holtmann
27f43d8de5 dbus: Replace StateChanged with PropertiesChanged signal
The actual supplicant state is exposed via a property on the interface
object. So having a separate signal StateChanged for notifying about
changes is a bad idea. The standard PropertiesChanged signal should be
used for this.

The advantage of StateChanged signal was that it includes the previous
state, but not even NetworkManager is making use of this. And tracking
the old state via the property and this signal is easily possible anyway.
2010-01-04 16:33:44 +02:00
Marcel Holtmann
a2753c285f dbus: Use simple strings for debug level
Instead of using some magic integer values that really only mean
something to WPA internal code, just use simple strings. Possible
values are "msgdump", "debug", "info", "warning" and "error" which
map directly to WPA debugging support.
2010-01-04 16:22:26 +02:00
Jouni Malinen
2f1a90188c dbus: Use free_dbus_object_desc() consistently to free object descriptor 2010-01-03 01:01:56 +02:00
Jouni Malinen
e90bd80cf5 dbus: Remove duplication of object methods/signals/properties
There is no need to duplicate the method/signal/property arrays that
were registered for objects. The registration was using static arrays
on methods/signals/properties in all places and we can as well use
those throughout without having to allocate memory and copy all the
entries for every object. This reduces number of allocations and
amount of unnecessary code quite a bit.
2010-01-03 00:52:30 +02:00
Jouni Malinen
3e87bd5478 dbus: Use stack for temporary object path
This is small enough buffer to not require more complex dynamic
allocation for temporary use.
2010-01-02 17:17:00 +02:00