Commit graph

323 commits

Author SHA1 Message Date
Ankita Bajaj
da8570f4c9 Allow non-PCS 6 GHz channels to be excluded from ACS
Add support to exclude non-PSC 6 GHz channels from the input frequency
list to ACS. The new acs_exclude_6ghz_non_psc=1 parameter can be used by
6 GHz only APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:23:13 +02:00
Ankita Bajaj
59bb72642a Allow ACS channel list to be configured as frequencies (in MHz)
The channel numbers are duplicated between 2.4 GHz / 5 GHz bands and 6
GHz band. Hence, add support to configure a list of frequencies to ACS
(freqlist) instead of a list of channel numbers (chanlist). Also, both 5
GHz and 6 GHz channels are referred by HOSTAPD_MODE_IEEE80211A. The 6
GHz channels alone can be configured by using both mode and frequency
list.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:19:52 +02:00
Jouni Malinen
f2c4b44b40 SAE H2E: RSNXE override in EAPOL-Key msg 3/4
This new hostapd configuration parameter rsnxe_override_eapol=<hexdump>
can be used to override RSNXE value in EAPOL-Key msg 3/4 for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 17:32:17 +02:00
Liangwei Dong
a5b2faa714 AP: Add op_class config item to specify 6 GHz channels uniquely
Add hostapd config option "op_class" for fixed channel selection along
with existing "channel" option. "op_class" and "channel" config options
together can specify channels across 2.4 GHz, 5 GHz, and 6 GHz bands
uniquely.

Signed-off-by: Liangwei Dong <liangwei@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a36e13a7cd SAE: Add sae_pwe configuration parameter for hostapd
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
f7fe055224 SAE: Allow AP behavior for SAE Confirm to be configured
hostapd is by default waiting STA to send SAE Confirm before sending the
SAE Confirm. This can now be configured with sae_confirm_immediate=1
resulting in hostapd sending out SAE Confirm immediately after sending
SAE Commit.

These are the two different message sequences:

sae_confirm_immediate=0
STA->AP: SAE Commit
AP->STA: SAE Commit
STA->AP: SAE Confirm
AP->STA: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

sae_confirm_immediate=1
STA->AP: SAE Commit
AP->STA: SAE Commit
AP->STA: SAE Confirm
STA->AP: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:38:26 +03:00
Alexei Avshalom Lazar
5c5ff22efc hostapd: Add EDMG channel configuration parameters
Add two new configuration parameters for hostapd:
enable_edmg: Enable EDMG capability for AP mode in the 60 GHz band
edmg_channel: Configure channel bonding for AP mode in the 60 GHz band

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:46:29 +03:00
Jouni Malinen
5a5639b068 DPP: Allow name and mudurl to be configured for Config Request
The new hostapd and wpa_supplicant configuration parameters dpp_name and
dpp_mud_url can now be used to set a specific name and MUD URL for the
Enrollee to use in the Configuration Request. dpp_name replaces the
previously hardcoded "Test" string (which is still the default if an
explicit configuration entry is not included). dpp_mud_url can
optionally be used to add a MUD URL to describe the Enrollee device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00
Jouni Malinen
018edec9b2 Remove IAPP functionality from hostapd
IEEE Std 802.11F-2003 was withdrawn in 2006 and as such it has not been
maintained nor is there any expectation of the withdrawn trial-use
recommended practice to be maintained in the future. Furthermore,
implementation of IAPP in hostapd was not complete, i.e., only parts of
the recommended practice were included. The main item of some real use
long time ago was the Layer 2 Update frame to update bridges when a STA
roams within an ESS, but that functionality has, in practice, been moved
to kernel drivers to provide better integration with the networking
stack.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-11 13:11:03 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
8d76e0ad7b EAP server: Configurable maximum number of authentication message rounds
Allow the previously hardcoded maximum numbers of EAP message rounds to
be configured in hostapd EAP server. This can be used, e.g., to increase
the default limits if very large X.509 certificates are used for EAP
authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
e54cfbb56a EAP-TEAP server: Allow a specific Identity-Type to be requested/required
The new hostapd configuration parameter eap_teap_id can be used to
configure the expected behavior for used identity type.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00
Jouni Malinen
76ddfae6eb EAP-TEAP server: Testing mechanism for Result TLV in a separate message
The new eap_teap_separate_result=1 hostapd configuration parameter can
be used to test TEAP exchange where the Intermediate-Result TLV and
Crypto-Binding TLV are send in one message exchange while the Result TLV
exchange in done after that in a separate message exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
6bb11c7a40 EAP-SIM/AKA server: Allow pseudonym/fast reauth to be disabled
The new hostapd configuration option eap_sim_id can now be used to
disable use of pseudonym and/or fast reauthentication with EAP-SIM,
EAP-AKA, and EAP-AKA'.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-01 10:36:11 +03:00
Terry Burton
f4111ff3d1 Extra RADIUS request attributes from SQLite
Add an SQLite table for defining per station MAC address version of
radius_auth_req_attr/radius_acct_req_attr information. Create the
necessary table and index where this doesn't exist. Select attributes
from the table keyed by station MAC address and request type (auth or
acct), parse and apply to a RADIUS message.

Add radius_req_attr_sqlite hostapd config option for SQLite database
file. Open/close RADIUS attribute database for a lifetime of a BSS and
invoke functions to add extra attributes during RADIUS auth and
accounting request generation.

Signed-off-by: Terry Burton <tez@terryburton.co.uk>
2019-07-30 19:58:09 +03:00
Terry Burton
74707def8f Move hostapd_parse_radius_attr() into ap_config.c
We will want to parse RADIUS attributes in config file format when
retrieving them from an SQLite database.

Signed-off-by: Terry Burton <tez@terryburton.co.uk>
2019-07-30 19:42:48 +03:00
Jouni Malinen
e2722bf81d OpenSSL: Allow two server certificates/keys to be configured on server
hostapd EAP server can now be configured with two separate server
certificates/keys to enable parallel operations using both RSA and ECC
public keys. The server will pick which one to use based on the client
preferences for the cipher suite (in the TLS ClientHello message). It
should be noted that number of deployed EAP peer implementations do not
filter out the cipher suite list based on their local configuration and
as such, configuration of alternative types of certificates on the
server may result in interoperability issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-07-12 18:13:10 +03:00
Jouni Malinen
0ed57c5ea8 EAP-TEAP server and peer implementation (RFC 7170)
This adds support for a new EAP method: EAP-TEAP (Tunnel Extensible
Authentication Protocol). This should be considered experimental since
RFC 7170 has number of conflicting statements and missing details to
allow unambiguous interpretation. As such, there may be interoperability
issues with other implementations and this version should not be
deployed for production purposes until those unclear areas are resolved.

This does not yet support use of NewSessionTicket message to deliver a
new PAC (either in the server or peer implementation). In other words,
only the in-tunnel distribution of PAC-Opaque is supported for now. Use
of the NewSessionTicket mechanism would require TLS library support to
allow arbitrary data to be specified as the contents of the message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-07-09 16:56:02 +03:00
leiwei
29c832d0ea macsec: Add configuration parameters for hostapd
Signed-off-by: leiwei <leiwei@codeaurora.org>
2019-06-03 20:27:44 +03:00
John Crispin
4f3f33804a HE: Make the basic NSS/MCS configurable
Add a config option to allow setting a custom Basic NSS/MCS set. As a
default we use single stream HE-MCS 0-7.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:45:04 +03:00
John Crispin
05b28306f5 HE: Add HE channel management configuration options
These are symmetric with the VHT ones.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:30:05 +03:00
John Crispin
ad5224dd43 HE: Fix typo srp -> spr in hostapd configuration parameters
The initial commit used srp instead of spr for the spatial reuse
configuration prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-05 00:59:18 +03:00
Toke Høiland-Jørgensen
ef7217518b hostapd: Add airtime policy configuration support
This adds support to hostapd for configuring airtime policy settings for
stations as they connect to the access point. This is the userspace
component of the airtime policy enforcement system PoliFi described in
this paper: https://arxiv.org/abs/1902.03439

The Linux kernel part has been merged into mac80211 for the 5.1 dev
cycle.

The configuration mechanism has three modes: Static, dynamic and limit.
In static mode, weights can be set in the configuration file for
individual MAC addresses, which will be applied when the configured
stations connect.

In dynamic mode, weights are instead set per BSS, which will be scaled
by the number of active stations on that BSS, achieving the desired
aggregate weighing between the configured BSSes. Limit mode works like
dynamic mode, except that any BSS *not* marked as 'limited' is allowed
to exceed its configured share if a per-station fairness share would
assign more airtime to that BSS. See the paper for details on these
modes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 14:57:43 +03:00
John Crispin
2ec71488b5 HE: Add Spatial Reuse Parameter Set element to the Beacon frames
SPR allows us to detect OBSS overlaps and allows us to do adaptive CCA
thresholds. For this to work the AP needs to broadcast the element
first.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-04-25 12:15:36 +03:00
Jouni Malinen
e00f780e2b DPP2: hostapd as TCP Relay
The new hostapd configuration parameter dpp_controller can now be used
with the following subparameter values: ipaddr=<IP address>
pkhash=<hexdump>. This adds a new Controller into the configuration
(i.e., more than one can be configured) and all incoming DPP exchanges
that match the specified Controller public key hash are relayed to the
particular Controller.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Brendan Jackman
bbed23aee6 hostapd: Reduce minimum beacon interval from 15 to 10 TUs
Very short beacon intervals can be useful for certain scenarios such
as minimising association time on PBSSs. Linux supports a minimum of
10[1] so let's reduce the minimum to match that.

[1] https://elixir.bootlin.com/linux/latest/ident/cfg80211_validate_beacon_int

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2019-04-06 17:05:09 +03:00
Jared Bents
841205a1ce OpenSSL: Add 'check_cert_subject' support for TLS server
This patch added 'check_cert_subject' support to match the value of
every field against the DN of the subject in the client certificate. If
the values do not match, the certificate verification will fail and will
reject the user.

This option allows hostapd to match every individual field in the right
order, also allow '*' character as a wildcard (e.g OU=Development*).

Note: hostapd will match string up to 'wildcard' against the DN of the
subject in the client certificate for every individual field.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-11 14:09:45 +02:00
Jouni Malinen
fc30f99b34 WPS: Allow AP SAE configuration to be added automatically for PSK
The new hostapd configuration parameter wps_cred_add_sae=1 can be used
to request hostapd to add SAE configuration whenever WPS is used to
configure the AP to use WPA2-PSK and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and PMF enabled for PSK
and required for SAE associations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:43 +02:00
Davina Lu
66819b07b5 hostapd: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the WPS Registrar offers a
different set of credentials (backhaul credentials instead of fronthaul
credentials) when the Multi-AP subelement is present in the WFA vendor
extension element of the WSC M1 message.

Add new configuration options to specify the backhaul credentials for
the hostapd internal registrar: multi_ap_backhaul_ssid,
multi_ap_backhaul_wpa_psk, multi_ap_backhaul_wpa_passphrase. These are
only relevant for a fronthaul SSID, i.e., where multi_ap is set to 2 or
3. When these options are set, pass the backhaul credentials instead of
the normal credentials when the Multi-AP subelement is present.

Ignore the Multi-AP subelement if the backhaul config options are not
set. Note that for an SSID which is fronthaul and backhaul at the same
time (i.e., multi_ap == 3), this results in the correct credentials
being sent anyway.

The security to be used for the backaul BSS is fixed to WPA2PSK. The
Multi-AP Specification only allows Open and WPA2PSK networks to be
configured. Although not stated explicitly, the backhaul link is
intended to be always encrypted, hence WPA2PSK.

To build the credentials, the credential-building code is essentially
copied and simplified. Indeed, the backhaul credentials are always
WPA2PSK and never use per-device PSK. All the options set for the
fronthaul BSS WPS are simply ignored.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Jouni Malinen
b0e91e3877 SAE: VLAN assignment based on SAE Password Identifier
The new sae_password parameter [|vlanid=<VLAN ID>] can now be used to
assign stations to a specific VLAN based on which SAE Password
Identifier they use. This is similar to the WPA2-Enterprise case where
the RADIUS server can assign stations to different VLANs and the
WPA2-Personal case where vlanid parameter in wpa_psk_file is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 17:24:23 +02:00
Jouni Malinen
fe468b0714 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
When I replaced the POS() function with ffs() when applying relevant
parts from the original patch, this ended up breaking the frame
construction since the POS() function was supposed to count the bit
offset for the mask with 0 being the LSB instead of 1 returned by ffs().
Furthermore, ffs() is not available in all C libraries (e.g., not
directly exposed by strings.h on Android), so better not depend on that
or compiler builtins for this since there is no need for this to be as
fast as possible in configuration parsing.

Fix this with a simple function to determine the number of bits the
value needs to be shifted left to align with the mask.

Fixes: 11ce7a1bc3 ("HE: Add MU EDCA Parameter Set element (AP)")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-12 01:23:30 +02:00
Jared Bents
159a7fbdea crl_reload_interval: Add CRL reloading support
This patch adds a new flag 'crl_reload_interval' to reload CRL
periodically. This can be used to reload ca_cert file and the included
CRL information on every new TLS session if difference between the last
reload and the current time in seconds is greater than
crl_reload_interval.

This reloading is used for cases where check_crl is 1 or 2 and the CRL
is included in the ca_file.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
2019-01-27 18:45:07 +02:00
Ian Archer
9758b08bcf hostapd: Add support for setting pbss option from config file
There is currently no support for setting hostapd_bss_config.pbss from a
config file, i.e., it was used only based on automatic logic in
wpa_supplicant. This patch adds a key naturally called "pbss" which can
be used to set it.

Cc: Antony King <antony.king@bluwirelesstechnology.com>
Signed-off-by: Brendan Jackman <brendan.jackman@bluwirelesstechnology.com>
2019-01-21 12:35:59 +02:00
Siva Mullati
11ce7a1bc3 HE: Add MU EDCA Parameter Set element (AP)
Add support for configuring parameters for the MU EDCA Parameter Set
element per IEEE P802.11ax/D3.0.

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
2019-01-08 17:22:43 +02:00
Jouni Malinen
cc9c4feccc OpenSSL: Allow systemwide policies to be overridden
Some distributions (e.g., Debian) have started introducting systemwide
OpenSSL policies to disable older protocol versions and ciphers
throughout all programs using OpenSSL. This can result in significant
number of interoperability issues with deployed EAP implementations.

Allow explicit wpa_supplicant (EAP peer) and hostapd (EAP server)
parameters to be used to request systemwide policies to be overridden if
older versions are needed to be able to interoperate with devices that
cannot be updated to support the newer protocol versions or keys. The
default behavior is not changed here, i.e., the systemwide policies will
be followed if no explicit override configuration is used. The overrides
should be used only if really needed since they can result in reduced
security.

In wpa_supplicant, tls_disable_tlsv1_?=0 value in the phase1 network
profile parameter can be used to explicitly enable TLS versions that are
disabled in the systemwide configuration. For example,
phase1="tls_disable_tlsv1_0=0 tls_disable_tlsv1_1=0" would request TLS
v1.0 and TLS v1.1 to be enabled even if the systemwide policy enforces
TLS v1.2 as the minimum version. Similarly, openssl_ciphers parameter
can be used to override systemwide policy, e.g., with
openssl_ciphers="DEFAULT@SECLEVEL=1" to drop from security level 2 to 1
in Debian to allow shorter keys to be used.

In hostapd, tls_flags parameter can be used to configure similar
options. E.g., tls_flags=[ENABLE-TLSv1.0][ENABLE-TLSv1.1]

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 17:14:26 +02:00
Beni Lev
076f1ea1d9 OCE: Add RSSI based association rejection support (AP)
An AP might reject a STA association request due to low RSSI. In such
case, the AP informs the STA the desired RSSI improvement and a retry
timeout. The STA might retry to associate even if the RSSI hasn't
improved if the retry timeout expired.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2019-01-01 18:18:50 +02:00
Sam Voss
dd5d325b0a hostapd: Add configuration option check_crl_strict
Add the ability to ignore time-based CRL errors from OpenSSL by
specifying a new configuration parameter, check_crl_strict=0.

This causes the following:

- This setting does nothing when CRL checking is not enabled.

- When CRL is enabled, "strict mode" will cause CRL time errors to not
  be ignored and will continue behaving as it currently does.

- When CRL is enabled, disabling strict mode will cause CRL time
  errors to be ignored and will allow connections.

By default, check_crl_strict is set to 1, or strict mode, to keep
current functionality.

Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
2018-12-31 12:51:51 +02:00
Hristo Venev
d01203cafc hostapd: Add openssl_ecdh_curves configuration parameter
This makes it possible to use ECDSA certificates with EAP-TLS/TTLS/etc.
It should be noted that when using Suite B, different mechanism is used
to specify the allowed ECDH curves and this new parameter must not be
used in such cases.

Signed-off-by: Hristo Venev <hristo@venev.name>
2018-12-30 17:27:34 +02:00
Felix Fietkau
4d663233e6 hostapd: Support for overriding the bridge name per VLAN via vlan_file
This makes it easier to integrate dynamic VLANs in custom network
configurations. The bridge name is added after the interface name in the
vlan_file line, also separated by whitespace.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-21 12:02:57 +02:00
Venkateswara Naralasetty
9c06f0f6ae hostapd: Add Multi-AP protocol support
The purpose of Multi-AP specification is to enable inter-operability
across Wi-Fi access points (APs) from different vendors.

This patch introduces one new configuration parameter 'multi_ap' to
enable Multi-AP functionality and to configure the BSS as a backhaul
and/or fronthaul BSS.

Advertise vendor specific Multi-AP capabilities in (Re)Association
Response frame, if Multi-AP functionality is enabled through the
configuration parameter.

A backhaul AP must support receiving both 3addr and 4addr frames from a
backhaul STA, so create a VLAN for it just like is done for WDS, i.e.,
by calling hostapd_set_wds_sta(). Since Multi-AP requires WPA2 (never
WEP), we can safely call hostapd_set_wds_encryption() as well and we can
reuse the entire WDS condition.

To parse the Multi-AP Extension subelement, we use get_ie(): even though
that function is meant for parsing IEs, it works for subelements.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 01:04:14 +02:00
Mathy Vanhoef
9c55fdb023 OCV: Add hostapd config parameter
Add hostapd.conf parameter ocv to disable or enable Operating Channel
Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Jouni Malinen
7bd8c76a4f HS 2.0 server: RADIUS server support for SIM provisioning
This adds support for hostapd-as-RADIUS-authentication-server to request
subscription remediation for SIM-based credentials. The new hostapd.conf
parameter hs20_sim_provisioning_url is used to set the URL prefix for
the remediation server for SIM provisioning. The random
hotspot2dot0-mobile-identifier-hash value will be added to the end of
this URL prefix and the same value is stored in a new SQLite database
table sim_provisioning for the subscription server implementation to
use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-15 18:01:38 +02:00
Jouni Malinen
6ae04d7b34 HS 2.0: Allow Hotspot 2.0 release number to be configured
The new hostapd configuration parameter hs20_release can be used to
configure the AP to advertise a specific Hotspot 2.0 release number
instead of the latest supported release. This is mainly for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:54 +02:00
Jouni Malinen
678d8410af Move send_probe_response parameter to BSS specific items
This can be more convenient for testing Multiple BSSID functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 15:03:11 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Jouni Malinen
cad810a98f HS 2.0: OSU Provider NAI List advertisement
Extend hostapd to allow the new OSU Provider NAI List ANQP-element to be
advertised in addition to the previously used OSU Providers list
ANQP-element. The new osu_nai2 configurator parameter option is used to
specify the OSU_NAI value for the shared BSS (Single SSID) case while
osu_nai remains to be used for the separate OSU BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:49:42 +03:00
Hai Shalom
560e30bf3b Parse sae_password option when CONFIG_SAE is enabled
Call to parse_sae_password was incorrectly depending
on CONFIG_TESTING_OPTIONS and CONFIG_SAE. Should
depend only on the latter.

Fixes: 2377c1caef ("SAE: Allow SAE password to be configured separately (AP)")
Signed-off-by: Hai Shalom <haishalom@google.com>
2018-09-02 12:30:37 +03:00
Sathishkumar Muruganandam
47abe29aa9 hostapd: SET ht_capab support for disabling 40 MHz bandwidth
'hostapd_cli SET ht_capab' only checked for [HT40+] or [HT40-] or both
to be present. Based on the offset + or -, secondary_channel is updated
but HT20/VHT20 mode can be brought up only from config file and can't be
done using the SET command when the current HT mode is HT40+ or HT40-.

When managing AP+STA mode from userspace doing hostapd_cli: "disable ->
set channel, ht_capab -> enable" sequence, channel switch from
HT40/VHT40 to HT20/VHT20 was not possible with this SET ht_capab
limitation.

Cover this additional case by resetting secondary_channel to 0 for
HT20/VHT20 when ht_capab has neither [HT40+] nor [HT40-] present.

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-08-21 19:04:44 +03:00
Jouni Malinen
c6f2eceb8b FT: Add key management value FT-EAP-SHA384 for hostapd
This allows hostapd to be configuted to use the SHA384-based FT AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
8d660a4bac HS 2.0: Allow OSEN connection to be enabled in an RSN BSS
This allows a single BSS/SSID to be used for both data connection and
OSU. Instead of hostapd configuration osen=1, wpa_key_mgmt=OSEN (or more
likely, wpa_key_mgmt=WPA-EAP OSEN) is used to enable this new option.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-29 23:34:22 +03:00