Commit graph

451 commits

Author SHA1 Message Date
Johannes Berg
657f038102 Crypto build cleanup: remove INTERNAL_DES
In addition, rename des.c to des-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:00:44 +03:00
Johannes Berg
928a50a355 Crypto build cleanup: remove INTERNAL_SHA1
Instead of using a define and conditional building of sha1.c parts,
move the internal-SHA-1 into a separate file.
2009-07-28 20:47:04 +03:00
Johannes Berg
602606091b CONFIG_WIRELESS_EXTENSION need not be in CFLAGS 2009-07-28 20:25:19 +03:00
Johannes Berg
91382de4d1 CONFIG_WIRELESS_EXTENSION is purely internal to the Makefile 2009-07-28 14:41:33 +03:00
Johannes Berg
b2840aafaf make the build process quieter to see warnings 2009-07-28 14:37:40 +03:00
Johannes Berg
8055fb781d Clean up some more binaries in wpa_supplicant 'make clean' 2009-07-28 14:15:04 +03:00
Jon Loeliger
2e8eac2d67 Allow wpa_supplicant to use libnl-2.0
Change existing CONFIG_LIBNL20 compatibility code in
driver_nl80211.c to be used by both wpa_supplicant
and hostapd, but take care of nl_handle too now.

Propagate CONFIG_LIBNL20 out of .config file and onto
CFLAGS in the Makefile.

Use libnl-gen now too.

Signed-off-by: Jon Loeliger <jdl@bigfootnetworks.com>
---
2009-07-25 17:21:52 +03:00
Witold Sowa
137fb724b3 Set state to COMPLETE when AP mode has been initialized successfully 2009-07-25 17:01:23 +03:00
Jouni Malinen
4625a47f4b WPS: Change wpa_supplicant wps_reg to not send out M8
Since we do not currently support changing the AP settings received
from M7, there is no point in actually sending out the M8 that would
likely trigger the AP to reconfigure itself and potentially reboot.
For now, we just receive the AP settings in M7 and add a local network
configuration block based on those, but NACK the message. This makes
wps_reg work like wps_pin, but by using the AP PIN instead of a client
PIN.
2009-06-10 15:53:35 +03:00
Jouni Malinen
b14912025f Comment out unused functions if IEEE8021X_EAPOL is not defined 2009-05-29 22:35:31 +03:00
Dan Williams
cb8564b1dd dbus: add 'scanning' property
When the supplicant is connected and performs a scan, it doesn't enter
WPA_SCANNING state for various reasons.  However, external programs
still need to know that the supplicant is scanning since they may not
wish to perform certain operations during a scan (as those operations
will likely fail or yield incorrect results).  Add a 'scanning' property
and signal to the supplicant dbus interface to allow clients to
synchronize better with the supplicant when it scans.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2009-05-27 21:06:40 +03:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Jaime Soriano Pastor
e8fa6039f6 WPS methods exported over DBus
I've exported the methods wpsPbc, wpsReg and wpsPin (patch attached),
so wpa_supplicant should be able to connect with WPS using the dbus
interface. I couldn't test it well because the problem seems to be in
my wireless card, a Broadcom BCM4328. At least it seems to do the same
using both interfaces. With ndiswrapper driver the "wpsie" entry
(thanks Dan!) didn't appear, and with the Broadcom wl driver it
appears but I cannot associate using WPS.
2009-05-06 13:23:41 +03:00
Helmut Schaa
01a569e8a1 wpa_supplicant: add DBus method for changing debug parameters
Add a new DBus method "setDebugParams" which takes the parameters
debug_level, debug_timestamp and show_keys as input and updates the
internal debug variables accordingly.

To change the debug level, enable/disable timestamps and enable/disable
show_keys the following dbus-send command can be used:

dbus-send --system --dest=fi.epitest.hostap.WPASupplicant --print-reply
/fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.setDebugParams
int32:0 boolean:false boolean:false

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2009-05-06 11:54:00 +03:00
Jouni Malinen
da1fb17ca7 Add handling of SME auth/assoc timeout events
This allows wpa_supplicant to start searching for other APs (or re-try)
if the MLME times out.
2009-04-24 00:08:24 +03:00
Jouni Malinen
4bc181ecc7 Add new wpa_supplicant driver op for setting 802.1X port status
This can be used with drivers that implement PAE to control whether
normal data frames (non-EAPOL) are allowed.
2009-04-22 16:01:37 +03:00
Jouni Malinen
3ec97afe57 wpa_supplicant AP: Add preliminary support for WPS Internal Registrar
When in AP mode, wpa_supplicant is now enabling WPS (only Internal
Registrar). wpa_cli wps_pbc and wps_pin commands can be used to initiate
WPS negotiation similarly to how this is done in station mode (though,
the BSSID parameter is ignored).
2009-04-21 16:45:16 +03:00
Jouni Malinen
a8d6ffa48f wpa_supplicant AP: Add sta_set_flags 2009-04-20 16:33:13 +03:00
Jouni Malinen
db149ac949 wpa_supplicant AP: Add EAPOL frame TX and RX
This allows WPA-Personal 4-way handshake to be completed successfully.
2009-04-20 16:27:45 +03:00
Jouni Malinen
07d9a55297 wpa_supplicant AP: Update WPA/RSN configuration
Couple of additional operations are needed to make hostapd configuration
valid for WPA.
2009-04-20 16:11:08 +03:00
Jouni Malinen
c3dc92e85f Make deauthentication and disassociation consistent
This fixes an issue where the station was not marked disassociated
properly with locally requested deauthentication.
2009-04-20 11:36:47 +03:00
Jouni Malinen
83935317a7 Disconnect if 4-way handshake processing fails
There is no point in trying to continue if a 4-way handshake frame is
discarded or if PTK/GTK/IGTK configuration fails. Force the client to
disconnect in such a case to avoid confusing user by claiming the
connection was successfully completed.
2009-04-20 11:35:21 +03:00
Jouni Malinen
0f4e8b4f65 wpa_supplicant AP: add sta_add() and sta_remove() 2009-04-17 20:09:20 +03:00
Jouni Malinen
be301e56b6 wpa_supplicant AP: Fix build after hostapd driver_ops changes 2009-04-17 16:41:53 +03:00
Jouni Malinen
b615a25e4e wpa_supplicant AP: Fix hw_mode for 5 GHz channels 2009-04-12 12:10:08 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
c2220ec0b7 Fix couple of forgotten wpa_hw_modes -> hostapd_hw_modes
Some build configurations resulted in failure due to missed structure
rename.
2009-04-06 15:02:48 +03:00
Jouni Malinen
a0b2f99bd7 nl80211: Fix static WEP key configuration when using SME
Need to set WEP keys before requesting authentication in order to get
Shared Key authentication working. Previously, the WEP keys were not set
at all when using SME in wpa_supplicant.
2009-04-04 16:58:16 +03:00
Jouni Malinen
282d55908b wpa_supplicant AP: Add get_hw_feature_data
This is enough to allow open mode association to be completed with
driver_nl80211.c.
2009-04-03 19:11:22 +03:00
Jouni Malinen
6caf9ca68c Share same hw_feature definitions between hostapd and wpa_supplicant 2009-04-03 19:04:20 +03:00
Jouni Malinen
0892aaaf51 Set own MAC address in AP data structures 2009-04-03 16:53:09 +03:00
Jouni Malinen
2c2010acda Implement management frame TX for wpa_supplicant AP mode 2009-04-03 16:45:09 +03:00
Jouni Malinen
0915d02c3c wpa_supplicant AP: Add management frame RX for nl80211 2009-04-02 21:59:14 +03:00
Jouni Malinen
d2440ba01b Add Beacon configuration for wpa_supplicant AP mode 2009-04-02 16:09:48 +03:00
Jouni Malinen
efa4607800 SME: Add processing for rejected associations 2009-04-01 17:10:36 +03:00
Jouni Malinen
c0a6190815 Fix SHA-256-based KDF when using CCMP as the pairwise cipher
IEEE 802.11r KDF uses key length in the derivation and as such, the PTK
length must be specified correctly. The previous version was deriving
using 512-bit PTK regardless of the negotiated cipher suite; this works
for TKIP, but not for CCMP. Update the code to use proper PTK length
based on the pairwise cipher.

This fixed PTK derivation for both IEEE 802.11r and IEEE 802.11w (when
using AKMP that specifies SHA-256-based key derivation). The fixed
version does not interoperate with the previous versions. [Bug 307]
2009-04-01 12:04:36 +03:00
Jouni Malinen
73267b9ca4 WPS: Fix local configuration update after AP configuration
Update credential to only include a single authentication and
encryption type in case the AP configuration includes more than one
option. Without this, the credential would be rejected if the AP was
configured to allow more than one authentication type.
2009-03-30 19:00:55 +03:00
Jouni Malinen
0f2b2c1973 Add needed AP driver wrappers (most of which are still to-do) 2009-03-27 17:13:54 +02:00
Jouni Malinen
07f117edb5 Set hostapd configuration based on wpa_supplicant AP mode config 2009-03-27 16:45:47 +02:00
Jouni Malinen
d3a9822542 Add support for specifying subset of enabled frequencies to scan
A new network block parameter, scan_freq, can be used to specify subset
of frequencies to scan. This can speed up scanning process considerably
if it is known that only a small subset of channels is actually used in
the network. A union of configured frequencies for all enabled network
blocks is used in scan requests.

Currently, only driver_nl80211.c has support for this functionality.

For example, following parameter marks 2.4 GHz channels 1, 6, 11 to be
scanned: scan_freq=2412 2437 2462
2009-03-26 21:55:01 +02:00
Jouni Malinen
2d5b792d2b Add preliminary hostapd data structure initialization for AP mode
wpa_supplicant can now initialize hostapd data structures when mode=2 is
used to set up an AP. The hostapd configuration is not yet set based on
wpa_supplicant network configuration block. In addition, the glue code
for hostapd driver_ops needs number of functions that will be needed for
AP functionality.
2009-03-26 20:37:05 +02:00
Jouni Malinen
1f1b62a0f0 Move wpa_supplicant_create_ap() into ap.c 2009-03-26 16:08:17 +02:00
Jouni Malinen
c746331b52 Allow hostapd/config.h and wpa_supplicant/config_ssid.h coexist
Move the shared IEEE 802.11w enum definition into src/common/defs.h to
avoid redefinition when both configuration structures are included into
the same file.
2009-03-26 16:06:15 +02:00
Jouni Malinen
089757c6a9 Fix wpa_supplicant AP build after hostapd header file cleanup 2009-03-25 16:35:26 +02:00
Jouni Malinen
f1a4871084 Link in AP functionality from hostapd when CONFIG_AP=y
This is only allowing the code to be compiled and linked in; the actual
functionality is not yet enabled.
2009-03-25 12:23:42 +02:00
Jouni Malinen
1581b38b67 Initial step in adding simple AP mode support into wpa_supplicant
This version is adding the configuration option (mode=2) for this and
driver capability reporting to figure out whether AP mode can be used.
However, this does not actually implement any real functionality yet.
2009-03-25 11:38:47 +02:00
Jouni Malinen
36b15723ca Deprecate set_drop_unencrypted(), set_auth_alg(), and set_mode()
All these driver handlers can be implemented in associate() handler
which gets all the needed information in the parameters structure. The
old functions that provided only a single parameter will be removed
eventually to clean up the driver_ops structure, so driver wrappers
should start using the newer mechanism.
2009-03-24 20:06:02 +02:00
Sam Leffler
19b9436c0e Fix UNIX domain socket address handling to be more portable
Removing just sun_family is not portable since some systems (e.g.,
FreeBSD) include an additional sun_len field. Using offsetof should be
portable. In addition, set sun_ken for FreeBSD.
2009-03-21 22:00:27 +02:00
Jouni Malinen
7d737d6bf9 Fix FreeBSD build by not adding -ldl
Unlike Linux, FreeBSD does not use libdl.
2009-03-21 20:59:07 +02:00
Jouni Malinen
26c9d7ea24 Fix IEEE 802.11r build without CONFIG_CLIENT_MLME 2009-03-21 20:57:21 +02:00
Jouni Malinen
c9d2ffbc4c Document CONFIG_CLIENT_MLME option as specific to test driver
Since user space MLME is not used with nl80211 anymore, this option is
only of use with driver_test.
2009-03-20 22:35:19 +02:00
Jouni Malinen
c2a0407851 Add SME support (separate authentication and association)
This can be used, e.g., with mac80211-based Linux drivers with
nl80211. This allows over-the-air FT protocol to be used (IEEE
802.11r).

Since the nl80211 interface needed for this is very recent (added
today  into wireless-testing.git), driver_nl80211.c has backwards
compatibility code that uses WEXT for association if the kernel does
not support the new commands. This compatibility code can be
disabled by defining NO_WEXT_COMPAT. That code will also be removed
at  some point to clean up driver_nl80211.c.
2009-03-20 22:26:41 +02:00
Jouni Malinen
4cb0dcd92d Fix IEEE 802.11r key derivation function to match with the standard
IEEE Std 802.11r-2008, 8.5.1.5.2 starts the 'i' counter from 1, not 0.
Note: this breaks interoperability with previous versions. [Bug 303]
2009-03-19 15:46:00 +02:00
Jouni Malinen
c5aaa01562 Detach ctrl_iface monitor if the client socket is removed
No need to wait for 10 errors when using UNIX domain socket; we can
detach the client immediately on ENOENT.
2009-03-17 16:56:30 +02:00
Jouni Malinen
babfbf15cc FT: Add RIC Request generation and validation (but not processing)
This adds first part of FT resource request as part of Reassocition
Request frame (i.e., FT Protocol, not FT Resource Request Protocol).
wpa_supplicant can generate a test resource request when driver_test.c
is used with internal MLME code and hostapd can verify the FTIE MIC
properly with the included RIC Request.

The actual RIC Request IEs are not processed yet and hostapd does not
yet reply with RIC Response (nor would wpa_supplicant be able to
validate the FTIE MIC for a frame with RIC Response).
2009-03-09 20:45:17 +02:00
Jouni Malinen
58d1f6d189 Fix EAP-FAST only build to include the needed EAPOL implementation 2009-03-08 11:29:31 +02:00
Jouni Malinen
c472ef754d driver_ndis: Add PAE group address to the multicast address
This is done with wired interfaces to fix IEEE 802.1X authentication
when the authenticator uses the group address (which should be happening
with wired Ethernet authentication).

This allows wpa_supplicant to complete wired authentication successfully
on Vista with a NDIS 6 driver, but the change is likely needed for
Windows XP, too.
2009-03-07 23:10:41 +02:00
Jouni Malinen
4ef1e644eb Determiner whether driver is wired at runtime based on capabilities
Do not use just the driver name for this since driver_ndis.c supports
both wired and wireless NDIS drivers and needs to indicate the driver
type after initialization.
2009-03-07 22:05:43 +02:00
Jouni Malinen
ed843aaa33 WMM-AC: Fix hostapd processing of ADDTS Request and add test code
Calculate the estimated medium time using integer variables since there
is no real need to use floating point arithmetics here. In addition,
make sure there is no division by zero regardless of how invalid the
request from the station is. Reject invalid parameters and refuse
requests that would take most of the bandwidth by themselves.

Add test code into wpa_supplicant mlme.c to allow WMM-AC negotiation to
be tested with driver_test.
2009-03-06 20:15:00 +02:00
Jouni Malinen
5c3dd4ebbe Enable WMM support in the test MLME code
This allows driver_test to be used to test WMM negotiation.
2009-03-06 17:28:00 +02:00
Jouni Malinen
9cf548c082 Allow PN531_PATH to be overriden from .config 2009-03-06 16:25:48 +02:00
Masashi Honma
e1ee6b600b WPS: Add support for NFC out-of-band mechanism
The new file wps_nfc.c and ndef.c implements NFC device independent
operation, wps_nfc_pn531.c implements NFC device dependent operation.

This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following NFC methods can be used:
- Enrollee PIN with NFC
- Registrar PIN with NFC
- unencrypted credential with NFC

Encrypted credentials are not supported.

Enrollee side operation:

Registrar side operation:

Example configuration.
CONFIG_WPS=y
CONFIG_WPS_NFC=y
CONFIG_WPS_NFC_PN531=y

I used NFC device "NXP PN531". The NFC device access method is
confidential, so I used outer library. Please download below files from
https://www.saice-wpsnfc.bz/index.php

[WPS NFC Library]
WpsNfcLibrary/WpsNfc.h
WpsNfcLibrary/WpsNfcType.h
WpsNfcLibrary/WpsNfcVersion.h
WpsNfcLibrary/linux/libnfc_mapping_pn53x.dll
WpsNfcLibrary/linux/wpsnfc.dll

[NFC Reader/Writer Kernel Driver]
NFCKernelDriver-1.0.3/linux/kobj/sonyrw.ko

<WiFi test>
The hostapd/wpa_supplicant with this patch passed below tests on
"Wi-Fi WPS Test Plan Version 1.6".
4.2.5 Add device using NFC Method with password token
(I used SONY STA instead of NXP STA.)

4.2.6 Add device using NFC Method with configuration token

5.1.9 Add to AP using NFC Method with password token
through internal registrar
(I used SONY AP instead of NXP AP.)

5.1.10 Add to AP using NFC Method with configuration token
through internal registrar
2009-03-06 16:16:22 +02:00
Jouni Malinen
7cc1b6c900 WPS: Add a workaround for TKIP/CCMP mixed mode credentials
Many deployed APs do not handle negotiation of security parameters well
when both TKIP and CCMP (or both WPA and WPA2) are enabled. The most
common end result seems to be ending up with the least secure option..

As a workaround, check whether the AP advertises WPA2/CCMP in Beacon
frames and add those options for the credential if needed. This allows
the client to select the most secure configuration regardless of how
broken the AP's WPS implementation is as far as auth/encr type
negotiation is concerned.
2009-03-05 21:39:39 +02:00
Jouni Malinen
77ac446621 Fix MLME build after WMM renames 2009-03-05 15:56:51 +02:00
Sam Leffler
a83d9c9652 Add build option CONFIG_TERMINATE_ONLASTIF
This makes wpa_supplicant terminate automatically if the configured
interface(s) disappear.
2009-03-02 21:57:00 +02:00
Sam Leffler
daa70d49de Add support for wpa_supplicant syslog output
Enable for build: CFLAGS += -DCONFIG_DEBUG_SYSLOG in .config
Enable at runtime: -s on command line
2009-03-02 21:40:44 +02:00
Jouni Malinen
049a292f89 Fix builds that need SHA256 or mod_exp, but not TLS functions 2009-02-27 17:46:40 +02:00
Jouni Malinen
f4c617ee4c WPS UFD: Add entry to ChangeLog 2009-02-26 22:10:50 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Jouni Malinen
d5e2b2d274 WPS UFD: Use pre-configured DH keys only with OOB
The old behavior of generating new DH keys can be maintained for non-OOB
cases and only OOB (in this case, with UFD) will use the pre-configured
DH keys to allow the public key hash to be checked.
2009-02-26 22:09:35 +02:00
Jouni Malinen
7cbf51bbd8 WPS UFD: Remove oob_dev pointer from wps_context
This pointer and the especially the oob_dev->device_path does not remain
valid, so better not save it any longer than it is needed.
2009-02-26 22:07:55 +02:00
Jouni Malinen
390cd3105d WPS UFD: Make build conditional on CONFIG_WPS_UFD=y
Not all embedded devices have USB interface and it is useful to be able
to remove unneeded functionality from the binary. In addition, the
current implementation has some UNIX specific calls in it which may make
it not compile cleanly on all target systems.
2009-02-26 22:01:36 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Andriy Tkachuk
522b5b6ed3 WPS: Fix WEP key index to use 1..4 instead of 0..3
It seems that WFA WPS spec says that default key index should be 1 (not
0). I think this meas that WEP key indexes region is not from 0 to 3,
but from 1 to 4 in WPS. At least WRT610N implemented it this way.
2009-02-18 19:58:44 +02:00
Jouni Malinen
7c2849d2a0 Add BSS flags to scan results to indicate signal quality validity
These flags are used to mark which values (level, noise, qual) are
invalid (not available from the driver) and whether level is using dBm.
D-Bus interface will now only report the values that were available.
2009-02-18 13:40:38 +02:00
Andriy Tkachuk
4b195a1bc9 WPS: support WEP keys in hex characters format in received credentials
Attached patch makes wpa_supplicant support WEP keys in hex characters
format in received credentials from Registrars (tested with WRT610N).
2009-02-17 10:30:43 +02:00
Andriy Tkachuk
0632542b8b WPS: support registration with APs in WEP security mode
Attached patch fixes the issue when supplicant does not select APs in
WEP security mode for WPS registration.
2009-02-17 10:17:24 +02:00
Jouni Malinen
84992a8fb4 Updated to-do list for wpa_supplicant
No point in using time with Host AP driver optimizations anymore.
Note another race condition with 4-way handshake (and PTK config to
driver).
2009-02-16 20:50:55 +02:00
Jouni Malinen
caf3159831 Update nmake.mak to match with current files 2009-02-15 18:35:23 +02:00
Jouni Malinen
c511c8c6e0 Avoid using #ifdef inside printf string
This makes it easier to use a preprocessor macro for printf.
2009-02-15 14:35:30 +02:00
Daniel Mierswa
d94d4bafbb Improved 'make install' (use BINDIR/LIBDIR, install shared objects) 2009-02-15 14:22:50 +02:00
Daniel Mierswa
6301cc5d38 Allow the privsep driver to pass the set_country to the real driver 2009-02-15 14:13:27 +02:00
Jouni Malinen
ba2a573c5f Rename "broadcast SSID" to "wildcard SSID"
"Wildcard SSID" is the term used in IEEE Std 802.11-2007, so it is a
better name for the zero-length SSID used in Probe Request.
2009-02-14 22:21:17 +02:00
Jouni Malinen
6a1063e008 driver_nl80211: Add support for multi-SSID scan requests 2009-02-14 21:17:46 +02:00
Jouni Malinen
e76baaac0c Add support for multi-SSID scan requests
If the driver reports support for more than one SSID per scan request,
optimize scan_ssid=1 operations in ap_scan=1 mode. This speeds up
scanning whenever scan_ssid=1 is used since the broadcast SSID can be
included in every scan request and if driver supports more than two
SSIDs in the scan request, the benefits are even larger when multiple
networks have been configured with ap_scan=1.

This is also cleaning up wpa_supplicant_scan() function by moving code
around so that the SSID list is not processed unnecessarily if the
operation mode does not need this.
2009-02-14 20:59:26 +02:00
Jouni Malinen
fc2b7ed5f3 Add extended driver scan request command: driver_ops::scan2()
This can be used to provide support for scanning multiple SSIDs at a
time to optimize scan_ssid=1 operations. In addition, Probe Request IEs
will be available to scan2() (e.g., for WPS PBC scanning).
2009-02-14 17:01:32 +02:00
Jouni Malinen
362f781e1c Allow multiple driver wrappers to be specified on command line
For example, -Dnl80211,wext could be used to automatically select
between nl80211 and wext. The first driver wrapper that is able to
initialize the interface will be used.
2009-02-14 16:43:43 +02:00
Jouni Malinen
80bc75f135 New driver capability info: max number of scan SSIDs
The driver wrappers can now inform wpa_supplicant how many SSIDs can
be used in a single scan request (i.e., send multiple Probe Requests
per channel). This value is not yet used, but it can eventually be used
to allow a new scan command to specify multiple SSIDs to speed up
scan_ssid=1 operations. In addition, a warning could be printed if
scan_ssid=1 is used with a driver that does not support it
(max_scan_ssids=0).
2009-02-12 22:05:32 +02:00
Jouni Malinen
f6190d376d Removed an obsolete comment about use of external program for EAP 2009-02-11 22:35:27 +02:00
Jouni Malinen
ec1020512c wpa_gui-qt4: Add support for selecting between WEP open/shared key auth
Split the auth=none option into three: open, WEP, WEP with shared key to
allow the user specify WEP with shared key authentication. In addition,
fix static WEP key edits to be enabled only when using static WEP keys
(i.e., not for IEEE 802.1X).
2009-02-10 15:26:26 +02:00
Jouni Malinen
4225097c5a Fix test-sha256 build 2009-02-10 14:31:27 +02:00
Jouni Malinen
073ab58ff5 Fixed a copy-paste error in a function documentation 2009-02-10 11:45:17 +02:00
Helmut Schaa
c3f5b1e16d Send a dbus reply only if requested by the caller
wpa_supplicant should not send a dbus reply as response to a method call
if no reply was requested by the caller. Sending a reply even if not
requested is basically no problem but triggers dbus warnings like the
one below.

Feb  9 07:31:23 linux-gvjr dbus-daemon: Rejected send message, 2 matched
rules; type="error", sender=":1.129" (uid=0 pid=30228
comm="/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wp")
interface="(unset)" member="(unset)" error
name="fi.epitest.hostap.WPASupplicant.InvalidInterface"
requested_reply=0 destination=":1.128" (uid=0 pid=30226
comm="/usr/sbin/NetworkManager "))

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2009-02-09 19:45:06 +02:00
Jouni Malinen
53c256a476 Fix MinGW build with CONFIG_EAP_TNC=y
MinGW does not use -ldl so do not add this unconditionally.
2009-02-08 12:47:28 +02:00
Jouni Malinen
96c7c3072d Fix privsep build with CONFIG_CLIENT_MLME=y
Add wpa_supplicant_sta_free_hw_features() and wpa_supplicant_sta_rx()
for driver wrappers in wpa_priv.
2009-02-07 10:30:32 +02:00
Daniel Mierswa
716d543d5c Include wpabuf.o in wpa_priv build
If you choose to use CONFIG_PRIVSEP=y, the wpabuf functions seem to
miss. The attached patch is against trunk and should probably fix it.
2009-02-07 10:19:28 +02:00
Jouni Malinen
6dbcd00912 Removed CONFIG_EAP_WSC=dyn option
Build EAP-WSC dynamically does not make much sense and with the
dependencies to WPS code from number of places resolving this is not
trivial. It is simpler to just remove this option.
2009-02-07 10:09:49 +02:00
Pavel Roskin
4c2660c2b0 Fix building dynamic EAP peer modules
Strip directory name from the target in the pattern rule for dynamic
modules.  Remove dynamic modules on "make clean".
2009-02-07 10:05:23 +02:00
Jouni Malinen
e1c7954d5d Added CONFIG_WPS_UPNP for wpa_supplicant tests
For now, this is just an undocumented build option to make it possible
to build ../src/wps/*.o in a way that matches with hostapd needs.
2009-02-06 13:52:30 +02:00
Daniel Mierswa
b77eab282a Explicitly link against libdl when including TNC support
If you don't choose OpenSSL as TLS implementation and choose to enable
CONFIG_EAP_TNC you have to link against libdl. The OpenSSL libraries
implicitly link against them, so this might be a reason why it wasn't
noticed yet. I assume the same applies to hostapd.
2009-02-05 19:24:16 +02:00
Jouni Malinen
a7baefda28 Fixed eapol_test linking with CONFIG_IBSS_RSN=y 2009-02-05 18:20:26 +02:00
Jouni Malinen
42f1ee7d1f Fixed scan buffer increasing with WEXT
We can now handle up to 65535 byte result buffer which is the maximum
due to WEXT using 16-bit length field. Previously, this was limited to
32768 bytes in practice even through we tried with 65536 and 131072
buffers which we just truncated into 0 in the 16-bit variable.

This more or less doubles the number of BSSes we can received from scan
results.
2009-02-05 12:00:23 +02:00
Helmut Schaa
81e59f1070 Fix a segfault in wpa_supplicant_deinit
If wpa_supplicant is started with -u but the DBus service is already
registered wpa_supplicant will bail out. However, it will segfault
in wpa_supplicant_deinit because global->drv_priv wasn't allocated
yet.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2009-02-04 21:55:12 +02:00
Jouni Malinen
421b4ba50a Add CONFIG_DRIVER_NL80211 and clarify client MLME limitations
This is based on a patch from Pavel Roskin <proski@gnu.org>, but with
the WIRELESS_DEV part removed instead of moved since it does not apply
anymore. Additional note on client MLME limitations was also added.
2009-02-04 21:48:05 +02:00
Pavel Roskin
e7e9c46e55 Use better examples for MadWifi path in defconfig, clarify comments
MadWifi is unlikely to be in ../head relative to hostapd or
wpa_supplicant, as it would be inside the hostap git repository.
MadWifi sources are more likely to be in a directory called "madwifi"
and residing outside the hostap repository.  Using "madwifi" also
demonstrates that the top-level madwifi directory is needed.
2009-02-04 21:45:14 +02:00
Jouni Malinen
97642d73ee wpa_gui-qt4: Disable WPS tab in the same way as the menu item
Disable by default and only enable if the running wpa_supplicant has
support for WPS. This is based on a patch from Kel Modderman
<kel@otaku42.de>.
2009-02-01 22:02:32 +02:00
Jouni Malinen
1c5aeef0c2 Add comments on the new Broadcom driver not using driver_broadcom.c
The newer Broadcom driver ("hybrid Linux driver") supports Linux
wireless extensions and does not need (or even work) with the old
driver wrapper.
2009-01-30 21:34:40 +02:00
Jouni Malinen
3b2cf800af WPS: Lock AP Setup on multiple AP PIN validation failures
If a Registrar tries to configure the AP, but fails to validate the
device password (AP PIN), lock the AP setup after four failures. This
protects the AP PIN against brute force guessing attacks.
2009-01-23 21:57:43 +02:00
Jouni Malinen
a609915233 Allow WPS APs for PIN enrollment even without Selected Registrar
Some WPS APs do not set Selected Registrar attribute to 1 properly when
using an external Registrar. Allow such an AP to be selected for PIN
registration after couple of scan runs that do not find APs marked with
Selected Registrar = 1. This allows wpa_supplicant to iterate through
all APs that advertise WPS support without delaying connection with
implementations that set Selected Registrar = 1 properly.
2009-01-23 13:10:58 +02:00
Jouni Malinen
695e2b48e2 Documented interface for external WPS credential processing 2009-01-21 16:42:11 +02:00
Jouni Malinen
1cc84c1c6b Increased wpa_cli/hostapd_cli ping interval and made it configurable
The default interval is now 5 seconds (used to be 1 second for
interactive mode and 2 seconds for wpa_cli -a). The interval can be
changed with -G<seconds> command line option.
2009-01-20 21:12:00 +02:00
Jouni Malinen
adddffd129 Fixed MFP Association Comeback mechanism to use Timeout Interval IE
The separate Association Comeback Time IE was removed from IEEE 802.11w
and the Timeout Interval IE (from IEEE 802.11r) is used instead. The
editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but
still, the use of Timeout Interval IE is the expected mechanism.
2009-01-19 18:42:10 +02:00
Jouni Malinen
476621644c WPS: Add configurable option for processing credentials externally
The wps_cred_process option can be used to configure wpa_supplicant to
send received Credential attributes for external processing over
ctrl_iface and dbus. This allows external programs to update their
configuration when WPS is used to provision new networks.
2009-01-18 12:27:12 +02:00
Jouni Malinen
eca6e0a9a5 WPS: Provide the unparsed Credential attribute to cred_cb()
This makes it easier to pass the credential data to external programs
(e.g., Network Manager) for processing. The actual use of this data is
not yet included in hostapd/wpa_supplicant.
2009-01-17 22:17:12 +02:00
Jouni Malinen
f286077de2 WPS: Ignore credentials for unsupported authentication type
The current implementation does not support WPA/WPA2-Enterprise
credentials. Ignore any credential that is using unsupported
authentication type to avoid potential issues with partially configured
network blocks.
2009-01-17 21:45:51 +02:00
Jouni Malinen
7aab82b3fe Fixed WPS credential conversion to wpa_supplicant configuration
Must not set pairwise_cipher/group_cipher for non-WPA/WPA2 networks
since the configuration parser is going to reject such values. In
addition, should not limit group_cipher to just TKIP or TKIP|CCMP just
in case the AP is using WEP as the group cipher. Default group_cipher
value can be used for all cases.
2009-01-17 21:37:15 +02:00
Jouni Malinen
98f14041d0 IBSS RSN: Added key configuration 2009-01-17 18:14:41 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
b9a2e577b4 IBSS RSN: Set the PSK based on network configuration 2009-01-17 17:47:25 +02:00
Jouni Malinen
4691fc7bc8 IBSS RSN: Set more hardcoded RSN IEs for now
This allows 4-way handshakes to be completed successfully.
2009-01-17 17:39:57 +02:00
Jouni Malinen
3146b2b961 IBSS RSN: Added couple of required WPA supplicant callback functions 2009-01-17 17:31:21 +02:00
Jouni Malinen
8be1844071 Process received EAPOL frames in IBSS RSN code if in IBSS mode 2009-01-17 17:25:11 +02:00
Jouni Malinen
53895c3b60 Disable per-BSSID authentication for RSN IBSS
RSN IBSS uses authentication per-STA and that is initialized separately,
so there is no need to enable the per-BSS like authentication that is
used with APs.
2009-01-17 16:41:47 +02:00
Jouni Malinen
a5da9c64c9 Save and restore wpa_gui state when session manager restarts the app
This makes wpa_gui remember whether it was only in the tray when the
session was terminated and starts only in the tray if session manager
restarts it automatically.
2009-01-17 13:45:05 +02:00
Jouni Malinen
da3c6a5e2b Fixed auth_send_eapol() to use correct ctx structure 2009-01-16 01:18:11 +02:00
Jouni Malinen
d0fc6e1211 Use a hardcoded RSN IE for testing to start Authenticator
This needs to be replaced with proper RSN IE from the peer STA (e.g.,
from Probe Response).
2009-01-16 01:11:50 +02:00
Jouni Malinen
e2d492dd08 Implement EAPOL sending callbacks for IBSS RSN 2009-01-16 00:56:31 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00
Jouni Malinen
676ea3413d eapol_test: Allow generated RADIUS attributes to be replaced
Do not add the automatically generated RADIUS attributes NAS-IP-Address,
Calling-Station-Id, Framed-MTU, NAS-Port-Type, and Connect-Info if -N
option is used with the same attribute type. This allows these
attributes to be replaced without causing duplicate entries.
2009-01-13 21:33:09 +02:00
Jouni Malinen
540264a721 Removed wpa_sm dereference from pmksa_cache_list() 2009-01-13 20:22:42 +02:00
Jouni Malinen
93ea8ed034 Partial fix for test_wpa build 2009-01-13 19:37:22 +02:00
Kel Modderman
e0f6d3d9b5 wpa_gui-qt4: silence compile warning + wpsTab enable/disable
Fix compile warning by renaming gridLayout to wpsGridLayout in
wpagui.ui, it seems to be used internally.

/usr/bin/uic-qt4 eventhistory.ui -o .ui/ui_eventhistory.h
/usr/bin/uic-qt4 scanresults.ui -o .ui/ui_scanresults.h
/usr/bin/uic-qt4 wpagui.ui -o .ui/ui_wpagui.h
Warning: name gridLayout is already used
/usr/bin/uic-qt4 userdatarequest.ui -o .ui/ui_userdatarequest.h
/usr/bin/uic-qt4 networkconfig.ui -o .ui/ui_networkconfig.h

Also disable WPS tab if the running supplicant doesn't support that,
just as the WPS action menu is.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2009-01-11 21:44:07 +02:00
Jouni Malinen
76e2592190 Share the same radiotap helper implementation 2009-01-09 15:22:19 +02:00
Jouni Malinen
8383da8009 Fixed eapol_test build after RADIUS API changes (const) 2009-01-09 13:27:56 +02:00
Jouni Malinen
6f78f2fb3b Preparations for 0.6.7 release 2009-01-06 20:11:15 +02:00
Eygene Ryabinkin
dfa141b1b0 wpa_cli: Embed command usage into the wpa_cli_commands array
It is better to have command description around the command definitions:
the chances for omitting usage, forgotting to change/delete them, etc.
are smaller than for the separate usage statement. [Bug 290]

Signed-off-by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
2009-01-05 21:33:34 +02:00
Eygene Ryabinkin
40fd868c09 wpa_cli: Improve sensitive command detection for readline history
I had added flags to the every command description: just now the only
meaningful flag tells that this command has sensitive arguments and it
shouldn't be written to the disk.  I rewrote the logics for the search
for the sensitive commands: special procedure is now loops over all
commands and tries to see if command has sensitive data. [Bug 289]

Signed-off-by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
2009-01-05 21:07:54 +02:00
Eygene Ryabinkin
413653e839 wpa_cli: fix readline history cleaning
First of all, the history had not been written to the disk, since almost
all commands were cleaned up due to the error in the history cleaning:
the return value of the last os_strncasecmp() call was not compared to
zero, but was rather used as is.  So the condition was almost always
true and most commands were removed from the history.

The second problem was that the evaluation of the potentially sensitive
commands was started at the entry number 1, instead of very first entry.
2009-01-05 20:48:45 +02:00
Jouni Malinen
2c04820d80 Fixed a typo in usage help 2009-01-04 22:13:34 +02:00
Tomasz Wolniewicz
db803a3607 eapol_test: Add a universal way of adding extra RADIUS attributes
This change replaces -I and -i options (Chargeable-User-Identity) with a
new -N option that can add any RADIUS attribute into the Access-Request
messages without having to modify eapol_test for each new attribute.
2009-01-04 22:10:56 +02:00
Jouni Malinen
b39d1280a7 Silenced number of Doxygen warnings 2009-01-04 15:07:54 +02:00
Jouni Malinen
f565d71ac9 Remove wpa_gui from doxygen documentations
The *.ui.h were causing number of warnings and they do not need to be
included in documentation.
2009-01-04 14:58:47 +02:00
Jouni Malinen
f58b20ce66 Fixed IMAGE_PATH for doxygen run in root directory 2009-01-04 14:44:33 +02:00
Jouni Malinen
cd7aacbed4 Remove temporary Qt build directories from Doxygen run 2009-01-04 14:28:20 +02:00
Jouni Malinen
842e11d0bd Remove unwanted wpa_supplicant -> struct wpa_supplicant links
Replace " wpa_supplicant" with " %wpa_supplicant" except for
"struct wpa_supplicant". This makes it easier to write Doxygen comments
since there is no need to add the ugly '%' prefix to each instance of
wpa_supplicant text showing up.
2009-01-04 14:25:58 +02:00
Jouni Malinen
e857fb05df Resolve a Doxygen warning 2009-01-04 14:06:13 +02:00
Jouni Malinen
f1a3e81098 Fixed Doxygen function links
No need to use explicit @link command, but must include () after
function name (and in couple of cases, use the current function name).
2009-01-04 13:54:07 +02:00
Jouni Malinen
dcc03dbe78 Use NULL, not 0, when comparing a pointer 2009-01-03 21:01:20 +02:00