Commit graph

510 commits

Author SHA1 Message Date
Avraham Stern
932267ad67 P2P: Add P2P_ASSOC_RESP to P2P vendor elements
Vendor specific IEs added to frame type P2P_ASSOC_RESP are saved in
the interface context, but as they are added as part of the P2P IEs,
they need to be saved in the global P2P context.

Fix this by directing vendor specific IEs added to P2P_ASSOC_RESP
frame type to the P2P context.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:47:41 +03:00
Ilan Peer
8bb8e6edb8 P2PS: Indicate the chosen operating frequency
On successful P2P PD, report the chosen frequency in case the local
device is going to be the P2P GO, so in can later be used to instantiate
the new P2P GO, etc.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Jouni Malinen
876e74aa5f Interworking: Fix wpa_supplicant build without CONFIG_HS20=y
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
8c4a1026b8 Interworking: Support unknown ANQP-elements in BSS table
This allows wpa_supplicant to expose internally unknown ANQP-elements in
the BSS command. For example, "ANQP_GET <BSSID> 265" can be used to
fetch the AP Geospatial Location ANQP-element and if the AP has this
information, the "BSS <BSSID>" command will include the response as
"anqp[265]=<hexdump>".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
a530fe778b Add wpa_supplicant EVENT_TEST control interface command
This testing command makes it easier to debug bursts of event message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 11:45:13 +03:00
Jouni Malinen
8db9a79d41 Reduce debug verbosity for read-only control interface commands
Commands like BSS and GET_NETWORK are used in some cases very frequently
and those can increase the amount of debug information from
wpa_supplicant without significant benefit. These were logged at the
DEBUG level (-d). Move logging of such read-only commands (i.e., no new
wpa_supplicant operation is started based on it) to EXCESSIVE level
(-ddd) which was already used for the PING command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-10 11:17:19 +03:00
Jouni Malinen
fc078be2dd Allow BSS to return information for AP that uses an invalid WSC IE
Previously, the BSS command returned an error if the WSC IE(s) in scan
results could not be parsed. This may be not ideal for all cases, to
instead of rejecting the command completely, return all other
information apart from the WPS information in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-30 00:01:48 +03:00
Jouni Malinen
137b293963 Remove unnecessary NULL check from LOG_LEVEL handler
cmd cannot be NULL here, so there is no need to check it before calling
os_strlen().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-22 00:22:12 +03:00
Jouni Malinen
dfaf11d648 P2P: Require fresh scan results for persistent group re-invocation
The P2P group is not yet operating when going through invitation
exchange for re-invocation. Previously, an old cached scan result could
be used to skip the scan immediately after the invitation exchange.
While this may result in the fastest possible connection, it does have
some issues with cases where the GO takes some time to start up. It
would also be at least theoretically possible for some of the BSS
parameters to be different, so having a fresh scan result from the new
GO instance may be desired in any case.

Add a mechanism to skip scan results that have been last updated before
a specific point in time and as the first user for this mechanism,
require chan results to be more recent than the invitation message
exchange for the P2P Client role in persistent group re-invocation case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-22 00:22:12 +03:00
Andrei Otcheretianski
b9da88d6c1 P2PS: Authorize any peer for P2PS method if interface address not known
When P2PS PD with default P2PS method is done, the peer that becomes GO
should authorize the client. However, P2PS specification doesn't require
the client to include its intended interface address in PD
Request/Response. As a result, the P2P Client's interface address may not
be known and any address may need to be authorized.

Previously, client's P2P Device Address was used for authorization,
which is not correct when a dedicated interface is used for P2P Client.
This is not resulting in a connection failure, however it causes a
significant delay (until WPS_PIN_TIME_IGNORE_SEL_REG elapses). Fix this
by authorizing the intended interface address, if known; or any address,
if not known.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-08-06 20:45:15 +03:00
Max Stepanov
93f22b4583 P2PS: Fix PD PIN event notifications
Change P2PS P2P-PROV-SHOW-PIN/P2P-PROV-ENTER-PIN event notifications
on PD Request/Response handling to meet required P2PS behavior.

The new implemented scheme:
1. For a legacy P2P provision discovery the event behavior remains
   without changes
2. P2PS PD, advertiser method: DISPLAY, autoaccept: TRUE:
   Advertiser: SHOW-PIN on PD request replied with a status SUCCESS
   Seeker: ENTER-PIN on PD response received with a status SUCCESS
3. P2PS PD, advertiser method: DISPLAY, autoaccept: FALSE:
   Advertiser: SHOW-PIN on PD request replied with a status
     INFO_CURRENTLY_UNAVAILABLE
   Seeker: ENTER-PIN on Follow-on PD request with a status
     SUCCESS_DEFERRED
4. P2PS PD, advertiser method: KEYPAD, autoaccept: TRUE/FALSE:
   Advertiser: ENTER-PIN on PD request replied with a status
     INFO_CURRENTLY_UNAVAILABLE
   Seeker: SHOW-PIN on PD response received with a status
     INFO_CURRENTLY_UNAVAILABLE

This change in behavior breaks the existing test cases
p2ps_connect_keypad_method_nonautoaccept and
p2ps_connect_display_method_nonautoaccept. Those will be fixed in a
followup commit.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 13:56:01 +03:00
Ilan Peer
85e152b646 P2P: Fix P2P_FLUSH clearing of p2p_go_avoid_freq
P2P_FLUSH command did not cleanly clear the p2p_go_avoid_freq data
structure, and left it in an inconsistent state, where the range field
was NULL but the num field was not 0. This would have resulted in an
invalid memory access in freq_range_list_includes().

Fix this.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 18:59:59 +03:00
Ilan Peer
3a8f008a24 P2P: Do not perform P2P GO CS in some cases
A P2P GO channel switch should not be triggered in all cases that
require channel list update. Specifically, a P2P GO CS should not
be triggered in case that the P2P GO state changed or in case that
that the P2P GO has just completed a CS.

To fix this, add reason code to wpas_p2p_channel_list_update() and
trigger CS flow only for the relevant cases.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 18:34:47 +03:00
Jouni Malinen
ab62f96f55 Move debug level string conversion functions to wpa_debug.c
This makes it possible to use these helper functions from hostapd as
well as the current use in wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:44:55 +03:00
Jouni Malinen
1e4f7bf5d0 Add 'GET_CAPABILITY fips' to enable runtime check for CONFIG_FIPS=y
This can be used to check whether the running wpa_supplicant version was
built with CONFIG_FIPS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Ahmad Kholaif
983422088f nl80211: Add means to query preferred channels
Extend the QCA vendor specific nl80211 interface to query the preferred
frequency list from driver and add a new wpa_cli command to query this
information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 19:46:31 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Max Stepanov
0670de74ae P2PS: Add CPT parameter to P2PS_PROVISION and P2PS_PROVISION_RESP
Add a parameter allowing to specify a value of Coordination
Protocol Transport to P2PS_PROVISION and P2PS_PROVISION_RESP commands.

Extend the p2ps_provision structure to contain cpt_priority and
cpt_mask properties and initialize them on a P2PS PD request command.

The format of the parameter:
    cpt=<cpt>[:cpt]

where <cpt> is CPT name e.g. UDP or MAC. The CPT names are listed
according to their preferences to be used for a specific P2PS session.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
e2b7fbf2fb P2PS: Add CPT parameter to P2P_SERVICE_ADD asp command
Add Coordination Transport Protocol parameter to P2P_SERVICE_ADD
asp command.

Extend p2ps_advertisement structure to contain CPT priorities
and a supported CPT bitmask.

The format of the new parameter:
    cpt=<cpt>[:<cpt>]

where <cpt> is a name of the Coordination Protocol Transport.
This implementation supports two CPT names: UDP and MAC.
The order of specified CPTs defines their priorities where
the first one has the highest priority.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Jouni Malinen
5dbd3bf915 FST: Avoid memory leak on double FST-ATTACH
Do not allow wpa_s->fst to be replaced when processing FST-ATTACH
command for an interface that has already been attached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
df4cea898c FST: Include fst/fst.h explicitly into wpa_supplicant/ctrl_iface.c
This header file is needed to get struct fst_iface_cfg and struct
fst_wpa_obj defined. While it does currently get pulled in through
ap/hostapd.h and ap/ap_config.h, a more explicit inclusion may be a
cleaner option for future.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:15:24 +03:00
Anton Nayshtut
daae49955f Add global wpa_supplicant DUP_NETWORK command
This command allows network variables to be copied from one network to
another when the networks belong to different radios. This is similar to
the per-interface DUP_NETWORK command. On the global control interface,
the command syntax is as follows:

DUP_NETWORK <src ifname> <dst ifname> <src network id> <dst network id> <variable name>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
3794af2dc1 FST: wpa_supplicant control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
55de4d4ba3 FST: wpa_supplicant [FST] flag for BSS in scan results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Jouni Malinen
66f1e078e7 DATA_TEST_TX: Avoid ubsan warning on 0x80<<24 not fitting in int
Use unsigned constant instead of signed to avoid warning with the LSB
being set in an int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
75352270fa Avoid misaligned IPv4 header accesses in DATA_TEST_* commands
The IPv4 header after the Ethernet header is not 32-bit aligned and the
previous version ended up accessing 32-bit members at misaligned
addresses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
2da525651d Add backtrace-based error path testing mechanism
The new TEST_FAIL and GET_FAIL control interface commands can be used
similarly to the earlier TEST_ALLOC_FAIL/GET_ALLOC_FAIL design. The new
version is more generic framework allowing any function to be annotated
for failure testing with the TEST_FAIL() macro. This mechanism is only
available in builds with CONFIG_WPA_TRACE_BFD=y and
CONFIG_TESTING_OPTIONS=y. For other builds, the TEST_FAIL() macro is
defined to return 0 to allow the compiler to remove the test code from
normal production builds.

As the first test site, allow os_get_random() to be marked for failing
based on call backtrace.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Stepanov, Max
a9ea609ce8 P2PS: Fix p2p_find last parameter handling
In p2p_find command line processing a loop searching for multiple
'seek=' parameters modifies cmd buffer adding '\0' terminators.
The 'freq=' parameter is handled after that and can be
lost if a 'freq=' follows 'seek=' in a command line.
Fix it by moving a handling of 'freq=' parameter to be processed
before 'seek=' handling loop.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-06-27 23:49:15 +03:00
Eliad Peller
38dcc86cb7 P2P: Consider ht/vht on P2P_GROUP_ADD command (with no params)
p2p_ctrl_group_add() takes care of various configuration options (such
as ht/vht) before calling wpas_p2p_group_add(), so use it (just like
when P2P_GROUP_ADD is called with additional params).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-06-19 15:57:16 +03:00
Eliad Peller
29292d53ee ctrl_iface: Make p2p_ctrl_group_add() more robust
Parse each parameter individually and combine all the function calls.
This will allow further patch to call it with no parameters (currently
this might result in failure).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-06-19 15:56:54 +03:00
Jouni Malinen
129b621653 P2PS: Fix P2P_FIND seek parameter parsing
Only the first seek=<service name> parameter was accepted from the
P2P_FIND command. Fix this to go through all seek parameters to
construct the list of service hash values to seek.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-18 17:27:30 +03:00
Purushottam Kushwaha
e11776a528 Combine multiple function calls to a single statement
This cleans up p2p_ctrl_group_add() to share a single call to
wpas_p2p_group_add().

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-14 11:42:29 +03:00
Jouni Malinen
e66bcedd3e Do not set own_disconnect_req flag if not connected
This fixes some issues where a disconnection event may get ignored if an
earlier operation to remove or disable a network resulted in an attempt
to disconnect event though no connection was in place.
wpa_s->current_ssid != NULL alone is not sufficient to determine that
there will be a driver event notifying completion of such disconnection
request. Set own_disconnect_req to 1 only if wpa_s->wpa_state is also
indicating that there is a connection or an attempt to complete one.

This showed up in a failure, e.g., when running the hwsim test case
scan_int followed by ap_vlan_wpa2_psk_radius_required where the latter
ended up not processing a connection failure event and getting stuck not
trying to run a new scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 15:42:57 +03:00
Krishna Vamsi
a80651d067 Add support to request a scan with specific SSIDs
Support a request to scan specific SSIDs given by user with the SCAN
command. The SSID list can be suffixed to the scan command as follows.
For example, if SSIDs "ABC" and "abc123" need to be specifically
scanned, the command should be "SCAN ssid 414243 ssid 616263313233". The
value of the SSID is passed in hexadecimal representation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-05 15:55:26 +03:00
Oren Givon
4504621f9c TDLS: Add TDLS_LINK_STATUS command to the control interface
Add the TDLS_LINK_STATUS command to the control interface. This command
shows what is the status of our current TDLS connection with the given
peer. Also, add the TDLS_LINK_STATUS command to wpa_cli.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:20:24 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
eaa8eefed1 Replace MAX_SSID_LEN with SSID_MAX_LEN
This makes source code more consistent. The use within Android driver
interface is left as-is to avoid changes in the old PNO interface
definition.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
d9d1b9527a Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
This makes the implementation easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Ben Greear
da3db6812d Fix INTERFACE_ADD parsing
This fixes a regression caused by commit
efa232f915 ('Add support for virtual
interface creation/deletion') for the case where an empty extra argument
is included.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-04-04 11:02:04 +03:00
Jithu Jance
efa232f915 Add support for virtual interface creation/deletion
Extend interface_add and interface_remove commands via an optional
argument to allow wpa_supplicant to create/delete a new virtual
interface.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2015-03-26 22:20:35 +02:00
Ben Greear
0f8385e6fa Show OSEN key management properly in scan results
Old code defaulted to WEP for an AP advertising OSEN. Show as OSEN
instead. Re-use most of the RSN parsing logic since all but the header
is the same.

Example output:

[root@ath9k-f lanforge]# ./local/bin/wpa_cli -i sta0 scan_results
bssid / frequency / signal level / flags / ssid
00:0e:8e:6f:40:49	2462	-23	[OSEN-OSEN-CCMP][ESS]	ben-138

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-03-25 16:04:03 +02:00
Avraham Stern
9bd566a33a Delay AP selection if all networks are temporarily disabled
If all networks are temporarily disabled, delay AP selection until at
least one network is enabled. Running AP selection when all networks are
disabled is useless as wpa_supplicant will not try to connect. In
addition, it will result in needless scan iterations that may delay the
connection when it is needed.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-03-22 20:53:58 +02:00
Max Stepanov
e9d280503a P2PS: Extend p2p_service_del asp to support 'all' parameter
Extend p2p_service_del asp command to support 'all' parameter to delete
all ASP service advertisements.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-03-20 15:56:59 +02:00
Neelansh Mittal
9772af66ba Interworking: Prevent scan during ANQP fetch and Interworking select
Reject external scan request while either ANQP fetch or Interworking
select is in progress. Not doing so could lead to a situation in which
Interworking automatic network selection does not get triggered because
of a new scan result event forcing the ANQP fetch cycle to be disrupted
and restarted all over again. Interworking automatic network selection
is only triggered when AQNP fetch cycle, that is, ANQP exchange with
every Interworking capable BSS in the current BSS list, is completed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-20 15:56:48 +02:00
Jouni Malinen
74fa78b281 Add AVG_BEACON_RSSI to SIGNAL_POLL output
If the driver reports separate signal strength average for Beacon
frames, report that in SIGNAL_POLL output.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:45:20 +02:00
Jouni Malinen
1772d348ea P2P: Fix interface deinit for failed group interface initialization
wpa_supplicant_deinit_iface() ends up removing all P2P groups if the
removed interface is the parent interface. This is correct behavior in
general, but this resulted in issues in the new group interface
initialization error path since wpa_s->parent was not assigned before
hitting this check. Fix this by assigning wpa_s->parent as part of
wpa_supplicant_add_iface().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:53 +02:00
Jouni Malinen
c28059091a Do not add blacklist entries based on normal disconnect request cases
There are number of cases where wpa_supplicant requests the current
connection to be disconnected before starting a new operation. Such
cases do not really indicate that there was an error in connecting or a
disconnection initiated by the AP, so do not add a temporary blacklist
entry in such sequences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 15:54:24 +02:00
Jouni Malinen
bdf0518bb9 P2P: Direct P2P_CONNECT command to proper interface
It is possible for the P2P_CONNECT control interface command to be
issued on an incorrect interface. While the upper layer component should
really use global control interface for this, make this work by
redirecting the command to the correct context if needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 11:54:39 +02:00
Jouni Malinen
9542f21f3a Clean up p2p_find command parsing and execution
There is no need to maintain three almost identical copies of the
wpas_p2p_find() call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 21:58:38 +02:00
Daisuke Niwa
fa9f381f20 P2P: Allow a specific channel to be specified in P2P_FIND
The optional freq=<MHz> can now be used with the P2P_FIND command to
specify a single channel to scan during the first round of P2P search.
For example, this can be used to replace the full initial scan with a
single channel scan of a known operation channel.

Signed-off-by: Daichi Ueura <daichi.ueura@sonymobile.com>
2015-02-28 21:52:56 +02:00