Commit graph

2212 commits

Author SHA1 Message Date
Arend van Spriel
4ed8d954dd TDLS: Tear down TDLS using wpas_drv_tlds_oper() if not external
When the device indicates to take care of TDLS operations the TDLS
setup is done calling wpas_drv_tdls_oper(). This patch does a similar
thing for the teardown. This fixes failure of teardown:

"TDLS: Could not find peer <mac> for link Teardown"

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-07-20 17:52:32 +03:00
Chengyi Zhao
831770bffe Cancel delayed scheduled scan when wpa_supplicant cleans up
Because a delayed scheduled scan will access the members of struct
wpa_supplicant which is freed and this can result in a crash,
wpa_supplicant needs to cancel delayed scheduled scan during cleanups.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-07-20 17:47:02 +03:00
Michal Kazior
c8ebeda406 wpa_supplicant: Add support for VHT BSS membership selector
This allows wpa_supplicant to associate to an AP that has VHT BSS
membership selector set to indicate VHT support is required for the BSS.

Without the patch it was impossible to connect to, e.g., hostapd-based
AP that has require_vht=1. wpa_supplicant was complaining with:
  hardware does not support required rate 63.0 Mbps

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:28:42 +03:00
Jouni Malinen
1075b29571 P2P: Report group formation failure on error to start GO mode
There is no need to wait for the 15 second group formation timeout
before indicating P2P group formation failure if GO mode cannot be
started successfully for some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:46 +03:00
Jouni Malinen
b62b29ea87 Do not block on ctrl_iface monitor events
It looks like some of the global control interface cases ended up
blocking in sendmsg() when trying to send an event. Since this can block
all wpa_supplicant processing for multiple seconds, this is very
undesirable. Avoid this by requesting sendmsg() to return an error
rather than waiting for the message to be sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:29 +03:00
Jouni Malinen
0b9d3b22c8 Interworking: Relax 3GPP info PLMN matching for MNC
3GPP TS 24.232 Annex A.3 allows network operator to advertise only two
digits of MNC even if MNC has three digits. Allow such matches in
network selection. In addition, allow three digit matches of MNC even if
MNC length was assumed to be two to avoid missing networks if MNC length
cannot be determined reliably. Remove the '-' separator from simulated
SIM/USIM cases to allow the new matching rules to work.

Fix the PLMN List information element parsing loop to use the length of
the PLMN List instead of the length of the full 3GPP Cellular Info to
avoid unexpected matches should a new element ever be added by 3GPP.

Finally, add more debug prints from PLMN matching to make the logs
easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 16:53:05 +03:00
Junli Zhao
c7a67a7719 WPS: Disconnect when removing existing WPS network block
wpas_clear_wps() was just clearing the current wpa_s->current_ssid
pointer when removing a WPS network block which with the device was
associated. This could leave the association up even though the network
block had already been removed. Prevent this by explicitly disconnecting
from the network instead of such clearing current_ssid.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 12:09:18 +03:00
Jouni Malinen
7e7610d788 EAP-EKE: Add peer implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Tomasz Bursztyka
06aeff5f8f dbus: Register the AutoScan method call at the right place
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2013-07-01 19:11:34 +03:00
Jouni Malinen
78f79fe5fc P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
Adding a new wpa_supplicant control interface for the dedicated
P2P_DEVICE would be quite confusing for programs that manage P2P
operations. Remove this control interface and require the global control
interface to be used since it will provide consistent interface for both
the new dedicated P2P_DEVICE (non-netdev) and old style P2P management
through a netdev.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
1c42b42f6c P2P: Fix TDLS and l2_packet init without P2P Device interface
Commit c68f6200a7 made these calls
conditional on !p2p_mgmt, but forced p2p_mgmt=1 for cases where the
driver does not use the dedicated P2P Device. Fix this by making the
!p2p_mgmt condition apply only if the driver does indicate use of a
dedicated P2P Device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:02:25 +03:00
Jouni Malinen
9e6a321815 Fix non-P2P build after the P2P_DEVICE changes
Commit c68f6200a7 added a call to a
function that exists only for P2P builds. Fix that with #ifdef
CONFIG_P2P.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 13:19:59 +03:00
Arend van Spriel
2e5ba4b6d1 P2P: Derive group interface name bit more sensibly
The interface name for the P2P group interface is derived from the
P2P management interface. When the P2P management interface is a
P2P Device interface, i.e., p2p-dev-wlanX, the name for the group
interface is abbreviated to p2p-X (X being group index). When the
P2P management interface starts with p2p-dev- use its postfix
instead. So P2P management interface p2p-dev-wlan3 results in group
interface name p2p-wlan3-0.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Arend van Spriel
c68f6200a7 P2P: Create P2P Device interface if supported
If the capability flag of the driver indicates a dedicated P2P Device is
supported, a P2P Device interface is created.

Create the P2P Device in main interface creation loop when the added
interface flags support and P2P supplicant is not yet initialized
avoiding recursion of add_interface.

Do not register l2_packet for P2P Device interface (both for EAPOL and
for TDLS).

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Arend van Spriel
bb4028f165 P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
Setting p2p_no_group_iface means 'use P2P management interface as P2P
connection interface' because it attempts to change the interface type.
The P2P_DEVICE is a dedicated interface and can not be changed. As such
ignore the configuration option.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Jouni Malinen
080585c01a Add support for OCSP stapling to validate server certificate
When using OpenSSL with TLS-based EAP methods, wpa_supplicant can now be
configured to use OCSP stapling (TLS certificate status request) with
ocsp=1 network block parameter. ocsp=2 can be used to require valid OCSP
response before connection is allowed to continue.

hostapd as EAP server can be configured to return cached OCSP response
using the new ocsp_stapling_response parameter and an external mechanism
for updating the response data (e.g., "openssl ocsp ..." command).

This allows wpa_supplicant to verify that the server certificate has not
been revoked as part of the EAP-TLS/PEAP/TTLS/FAST handshake before
actual data connection has been established (i.e., when a CRL could not
be fetched even if a distribution point were specified).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 01:01:15 +03:00
Arend van Spriel
72950ed240 P2P: Remove a call to wpas_p2p_deinit_global()
In wpa_supplicant_deinit(), the function wpas_p2p_deinit_global()
was called. Remove it as it will be called from wpas_deinit_iface()
upon removal of the P2P management interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:56:28 +03:00
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Andrei Otcheretianski
9578329874 Add AVG_RSSI report in signal_poll
Add AVG_RSSI report to the signal_poll command if it is reported by
the kernel.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:01:05 +03:00
Andrei Otcheretianski
2cc8d8f4e8 Add bandwidth and center freq info to signal_poll
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:00:46 +03:00
Alexander Bondar
1e0e943e19 Remove 802.11b rates only in case of P2P group operation
11b rates removal have had impact on SoftAP functionality in
wpa_supplicant. This patch verifies that only in case of P2P group
operation 11b rates will be eliminated. Refer also to commit
4c2c302893.

Signed-hostap: Alexander Bondar <alexander.bondar@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:28:33 +03:00
Jouni Malinen
ec7b97ab00 Interworking: Add support for using eap_proxy offload
Fetch IMSI through eap_proxy for Interworking network selection if
needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 18:42:17 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Jouni Malinen
5d5c4ee5e0 Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:56 +03:00
Jouni Malinen
9aaa6955a8 Remove compiler warnings if TDLS is enabled without WPA2
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:12 +03:00
Bharat Bhushan
1aef400bf0 IBSS RSN: Implement disconnect() callback using sta_deauth()
This allows driver wrappers to implement disconnection of IBSS peers in
cases operations, e.g., GTK update, fail.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 13:07:17 +03:00
Wei-Jen Lin
4abc0424ef P2P: Automatic channel selection at re-invocation of persistent GO
If the driver wrapper supports best operation channel indication, the
p2p_group_add command can now use special values (freq=2 and freq=5) to
indicate that the re-invoked persistent GO is to be started on the
specified band.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-05 02:06:29 +03:00
Jouni Malinen
e78aaca0da Stop TKIP countermeasures on FLUSH command
This is needed to get wpa_supplicant into clean state during testing if
a test case triggers countermeasures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 16:02:58 +03:00
Jouni Malinen
376204934d wpa_cli: Support tab completion with ifname= prefix
Enable tab completion for the cases where ifname= prefix is used in
interactive mode by skipping over that prefix before running through the
per-command completion routines. The ifname= prefix itself is also
covered by adding the possible interface names to the command list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:35:02 +03:00
Jouni Malinen
13b11ba702 wpa_cli: Allow IFNAME= prefix to be used
Strip out the IFNAME=<ifname> prefix from commands before parsing them
through the normal processing and then add the prefix back to the
beginning of the actual control interface command to make per-interface
commands work through the global control interface without having to use
the 'raw' command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:04:17 +03:00
Jouni Malinen
ae8535b6e1 WNM: Make ESS Disassoc Imminent event more convenient to use
Define a proper event prefix and include additional information to allow
ESS Dissassociation Imminent event to be used in a wpa_cli action
script.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:51:03 +03:00
Jouni Malinen
6df634faf9 WNM: Do not reject ESS Disassoc Imminent
This indication is not expected to include candidates, so do not reject
it based on that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:55 +03:00
Jouni Malinen
7b53acd395 WNM: Use defines for BSS Trans Mgmt field values
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:39 +03:00
Jouni Malinen
dad153d16b Try to use fast-associate on ENABLE_NETWORK
This makes ENABLE_NETWORK behave similarily to SELECT_NETWORK by
allowing a scan to be skipped if recent scan results are available.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Jouni Malinen
b06800170a Fix already-associated detection with driver-based BSS selection
wpa_s->pending_bssid is all zeros during connection attempt when
driver-based BSS selection is used. Take this into account when
determining whether new scan results should trigger a connection based
on wpa_s->current_ssid, i.e., a connection attempt with the selected
network instead of selected BSS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Sean Lin
72728c6fa8 P2P: Relax channel forcing for invitation processing with MCC support
When STA interface is connected and P2P interface gets invited in a
different channel from previous P2P group, the invitiation would fail
because of no common channel found. Fix this by using different logic
when device support multi channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:29:46 +03:00
Jouni Malinen
f65f539d9a GAS: Reduce query timeout to two seconds
The five second timeout for GAS queries is excessive and can result in
long waits in cases where APs are either misconfigured or frames are
lost.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:34 +03:00
Jouni Malinen
7a56af545a GAS: Assign new dialog token even if previous one is free
This makes the design more robust against unexpected duplicates since
each new GAS exchange gets a different dialog token compared to the
previous one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:16 +03:00
Jouni Malinen
9e1ecab1c5 GAS: Ignore replays if previous frag_id without dropping GAS session
It looks like it may be possible for an older GAS response to get retransmitted
even after the first copy has been processed. While this should not really come
up all the way to wpa_supplicant due to sequence number being same (i.e.,
duplicate detection should from the frame), some cases have been observed where
this did cause issues. Drop such a frame silently without dropping the ongoing
GAS session to allow a frame with the next frag_id to be processed after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:08:47 +03:00
Jouni Malinen
fa7ae9501b Add test code for fetching the last configured GTK
This can be useful for some test cases, so allow wpa_supplicant to be
built with special test functionality to expose the current (last
configured) GTK. This is disabled by default and can be enabled by
adding following line into .config:
CFLAGS += -DCONFIG_TESTING_GET_GTK

The GTK can then be fetched with "wpa_cli get gtk".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:00:56 +03:00
Jouni Malinen
576bce9c86 P2P: Direct global ctrl_iface commands automatically for P2P
The P2P management operations like P2P_FIND and P2P_CONNECT are not
really specific to any network interface. These are P2P Device level
operations that are in more global device context. Allow those to be
sent through the global control interface without IFNAME parameter.

For now, these commands are directed within wpa_supplicant to the
network interface that initialized the global P2P context. This may
change in the future if a special context is added for P2P operations.
Anyway, such changes can now be done internally within wpa_supplicant
without affecting this global control interface design from external
view point.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:41:08 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
92c4465b75 P2P: Mark P2P events global (not specific to interface)
This removes the "IFNAME=<ifname> " prefix from P2P events that are
received through the global control interface since these events are not
really specific to any network interface, but the full device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:59:51 +03:00
Jouni Malinen
ed496f131f P2P: Clean up debug prints
Replace direct wpa_msg() calls with p2p_dbg(), p2p_info(), and p2p_err()
calls that use a new debug_print() callback to handle actual debug
printing outside the P2P module.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:47:36 +03:00
Jouni Malinen
710ae9ac1f P2P: Move p2p_find stopped event message into p2p_supplicant.c
This removes wpa_ctrl.h dependency from src/p2p/* and makes the P2P
events more consistent, i.e., everything that is aimed for upper layer
processing from the wpa_supplicant control interfaces is generated in
p2p_supplicant.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 16:06:40 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
214e428b42 Allow global ctrl_iface monitors
The ATTACH/DETACH mechanism to request event messages from
wpa_supplicant can now be used through the global control interface,
too. This results in events from all interfaces being delivered through
a single monitor socket. "IFNAME=<ifname> " prefix is used on events
that are specific to an interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:07:28 +03:00
Dmitry Shmidt
89c7ac570b wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-05-18 12:21:44 +03:00
Jouni Malinen
faf9a8585d Add band option (2.4 vs. 5) for filtering scans
This can be used to implement filtering of channels for scan and based
on that, for connection, purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-18 12:17:10 +03:00
Jouni Malinen
b83b1b2da8 Android: Clarify keystore include directories
This updates hostapd to build using the new keystore header file
location and adds a note that the old frameworks/base/cmds/keystore can
be removed at some point in the future when old Android releases do not
need to be supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 12:03:35 +03:00