Commit graph

80 commits

Author SHA1 Message Date
Jouni Malinen
243dcc4ae4 tests: Add a helper function for clearing scan cache
This makes it more convenient and consistent to clear the cached scan
results from cfg80211 and wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 12:20:53 +02:00
Jouni Malinen
3c086180c1 tests: Make ap_wps_reg_config_tkip failure log more helpful
The "Not fully connected" report did not clearly identify what went
wrong, so make this more verbose in hope of being able to determine what
happened should this test case fail again.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 20:33:35 +02:00
Jouni Malinen
9ed53f5edf tests: Increase WPS connection timeout to make tests more robust
It was possible to hit the 10 second timeout in some test cases under
heavy load (e.g., with large number of VMs running tests in parallel).
These timeouts are not really indicating any real error, so make them
less likely to show up in reports by increasing the connection timeout
to 30 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 20:30:07 +02:00
Jouni Malinen
1531402ee4 tests: WPS with ap_scan=2
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-27 20:19:45 +02:00
Jouni Malinen
72a8e30b96 tests: Allow GCMP to be added into ap_wps_mixed_cred network profile
This is needed in preparation for WPS AES being mapped to enabling both
CCMP and GCMP if the driver supports both ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-27 16:52:10 +02:00
Jouni Malinen
3f08d1cde8 tests: WPS PBC triggered based on hostapd event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:58:04 +03:00
Jouni Malinen
e5a79e3f93 tests: WPS while connected
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 11:03:48 +03:00
Jouni Malinen
321c7f6034 tests: Make ap_wps_er_add_enrollee more robust under load
The scan for WPS-AUTH validation may miss a Probe Response frame if the
hostapd process gets blocked under load, e.g., when testing with
parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:17:17 +03:00
Jouni Malinen
a0fd2ae643 tests: WPS mixed-WPA/WPA2 credential merging
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-29 20:25:18 +03:00
Jouni Malinen
d352c407e3 tests: Verify that WPS operation report failure if WPS is disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-16 00:58:48 +03:00
Jouni Malinen
84a4084177 tests: Make WPS test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
6257f9c0da tests: WPS PIN provisioning with configured WPS v1.0 AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
0bde923c40 tests: Make ap_wps_init_2ap_pin/pbc more robust
It is possible for the scan to miss a Probe Response frame especially
under heavy load, so try again to avoid reporting invalid failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
befd671c9c tests: Make ap_wps_er_add_enrollee check a bit more robust
It is possible for the final step of the test case to fail under load
(e.g., when using parallel-vm.sh with large number of VMs), so run
through additional scan iterations if the WPS-AUTH flag does not get
removed immediately.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
cf3f0ec81c tests: Work around invalid ap_wps_ie_fragmentation failures
This can fail if Probe Response frame is missed and Beacon frame was
used to fill in the BSS entry. This can happen, e.g., during heavy load
every now and then and is not really an error, so try to workaround by
runnign another scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-14 00:53:27 +03:00
Jouni Malinen
6e12eaa449 tests: Additional WPS ctrl_iface coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:51 +03:00
Jouni Malinen
2f35bc649b tests: ctrl_iface invalid MAC address
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:51 +03:00
Jouni Malinen
df58939cec tests: WPS_CHECK_PIN with invalid PIN length
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
acd9b45a2c tests: Verify random WPS PIN generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
daad14ccd4 tests: WPS operations on channel 14 and on 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 13:49:05 +03:00
Jouni Malinen
9602b355f8 tests: WPS fragmentation when using PIN and WPS_REG
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 13:18:55 +03:00
Jouni Malinen
91f3cf6996 tests: Add option for running test cases that take a long time
run-tests.py now takes an optional --long parameter that can be used to
enable running of test cases that take a long time (multiple minutes).
By default, such test cases are skipped to avoid making the normal test
run take excessive amounts of time.

As an initial long test case, verify WPS PBC walk time expiration (two
minutes).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 13:11:32 +03:00
Jouni Malinen
f19d87f1ee tests: WPS cred event for external use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 12:31:45 +03:00
Jouni Malinen
b90188335a tests: WPS operation with other networks already configured
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 12:31:45 +03:00
Jouni Malinen
33c9b8d8ac tests: WPS AP PIN unlocked on timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 23:38:39 +02:00
Jouni Malinen
56887c3581 tests: WPS configuration file update
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 21:12:06 +02:00
Jouni Malinen
373cce553b tests: WPS and per-station PSK with non-writeable PSK file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:19:17 +02:00
Jouni Malinen
d7a68ad6b9 tests: Print BSS data on ap_wps_ie_fragmention error case
This makes it easier to debug what failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
ac786d67fe tests: WPS_CHECK_PIN error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
0489e8809d tests: WPS Enrollee PIN expiration on AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
c1cec68b93 tests: WPS AP PIN unlocking
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-15 19:04:31 +02:00
Jouni Malinen
4b727c5c26 tests: WPS AP configuration using external settings management
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-15 19:04:31 +02:00
Jouni Malinen
e8518757c9 tests: WPS PIN request file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-15 19:04:31 +02:00
Jouni Malinen
375afd7cf8 tests: WPS reconfiguration to open network
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 22:56:07 +02:00
Jouni Malinen
2035b17033 tests: Per-station PSK with WPS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 18:22:25 +02:00
Jouni Malinen
11d78bb1ee tests: WPS 2.0 rejection of WEP credential
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-05 12:40:54 +02:00
Jouni Malinen
180cd73dc8 tests: Optimize ap_wps_init_through_wps_config
Wait a bit between WPS_CONFIG command and the first scan. This can avoid
an extra five second wait due to having to scan again if the initial
scan operations happens to be quick enough to happen before the AP has
updated its configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 18:01:32 +02:00
Jouni Malinen
47c549fd8e tests: WPS UPnP operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-24 13:56:43 +02:00
Jouni Malinen
44ff0400b4 tests: WPS UPnP SSDP testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-24 13:56:42 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
1f020f5eb6 tests: Verify functionality with WPS 1.0 ER
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
11e7eeba8e tests: Verify WPS AP does not activate PBC during overlap
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
11c26f1b4a tests: Verify WPS ER behavior on selecting a single Enrollee
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
dccafedb9a tests: Include vendor extension in WPS M1
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:37:13 +02:00
Jouni Malinen
1013a57654 tests: WPS AP using fragmented WPS IE
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:22:45 +02:00
Jouni Malinen
9ba1fcb056 tests: WPS 2.0 AP rejecting WEP configuration
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:08:26 +02:00
Jouni Malinen
8697cbc0f8 tests: Make ap_wps_er_add_enrollee less likely to fail
WPS-ER-AP-REMOVE event from the ER is sent before HTTP UNSUBSCRIBE has
been completed. As such, it was possible for the following scan
validation step to be started before the AP has had a chance to react to
the ER status change. Makes this less likely to fail by waiting 200 ms
before starting the last scan.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 15:20:30 +02:00
Jouni Malinen
8674c02244 tests: Allow multiple Enrollee events in ap_wps_er_add_enrollee_pbc
It was possible for the AP to report two enrollees in this test case
(i.e., both the expected wlan1 device and also the ER device on wlan0).
The previous test script would fail if the wlan0 device is reported
first. Fix this by allowed the expected target to be found in either the
first or the second WPS-ER-ENROLLEE-ADD event.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
ad36d27d6a tests: Remove ignore_old_scan_res workaround
Now that wpa_supplicant requests the driver (cfg80211) to clear its scan
cache automatically after each BSS_FLUSH/FLUSH command, the previously
used ignore_old_scan_res workaround should not be needed for the hwsim
test cases anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:59:59 +02:00
Jouni Malinen
75b25ece93 tests: Verify GET_CONFIG ctrl_iface command on hostapd
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 22:15:36 +02:00