Commit graph

21 commits

Author SHA1 Message Date
Jouni Malinen
4fb26cee95 tests: Remove ap_ht40_csa and ap_ht40_csa3 workarounds
The issue in mac80211 was identified and proposed fix is now available,
so remove the workaround here and start reporting failures from
unexpected disconnection during CSA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 14:01:16 +02:00
Jouni Malinen
85b60adddd tests: Make ap_ht40_csa and ap_ht40_csa3 less likely to fail
It looks like cfg80211 can trigger disconnection even without disabling
HT, so the same issue may be hit with both of the channel switches in
these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 23:19:48 +03:00
Jouni Malinen
99e5f0e616 tests: Channel switch with HT40
ap_ht40_csa and ap_ht40_csa3 seem to show a cfg80211/mac80211 issue
where a CSA from HT40+ to HT40- channel results in HT getting disabled
due to cfg80211_chandef_compatible() check on c1->width == c2->width
claiming that the new channel is not compatible. For now, comment out
the FAIL case for these known issues to avoid constant failure for cases
that are not wpa_supplicant/hostapd issues. Once the kernel side design
has been reviewed, these error cases can be enabled here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 12:09:02 +03:00
Jouni Malinen
d00184df7c tests: Verify HT40 coex scan with 20 MHz legacy BSS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-16 01:23:29 +03:00
Jouni Malinen
0878241778 tests: Clear cfg80211 scan results before HT coex tests
This is needed to avoid incorrect failures based on neighboring BSSes
from earlier test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 23:01:10 +03:00
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
c674eb0dc3 tests: Remove [PSMP] parameter
This is not used anymore.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 22:05:02 +03:00
Jouni Malinen
6acecce1fe tests: hostapd configuration parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 18:07:05 +03:00
Jouni Malinen
9645dbe9b2 tests: OLBC state clearing on timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 16:35:54 +02:00
Jouni Malinen
ec36fff79f tests: HT OLBC detection on 5 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 16:28:00 +02:00
Jouni Malinen
fdc02e4caf tests: Require HT/VHT as BSS membership selector in Supp Rates
These are similar to the previous cases, but with supported rate set
limited to allow the BSS membership selector to fit into that element
instead of Ext Supp Rates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 10:39:32 +02:00
Jouni Malinen
0df965e975 tests: Extend OBSS scan coverage
Include another BSS in the scan results and run a test with a 40 MHz
intolerant neighboring BSS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-23 23:57:38 +02:00
Jouni Malinen
145f35bf30 tests: Verify HT/VHT required rejection
Previously, only the case of STA supporting HT/VHT was tested. Now both
cases are verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:49:12 +02:00
Jouni Malinen
7af87019ec tests: More HT40 co-ex scan cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-15 19:04:31 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
787136b040 tests require_ht=1
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
23bd3c5b67 tests: OLBC AP detection
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
084316bfd6 tests: HT40 OBSS scan and 20/40 MHz co-ex report
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
629dbdd36a tests: Wait for AP-ENABLED
It takes some time for hostapd to complete AP startup. In some cases,
this could potentially result in station starting a scan before the AP
is beaconing or ready to reply to probes. To avoid such race conditions,
wait for AP-ENABLED before going ahead with the test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
1b3926ef73 tests: Add a test case for HT40 co-ex scan
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00