Commit graph

4492 commits

Author SHA1 Message Date
Ashok Kumar
698c9e2021 OWE: Try another group only on association rejection with status 77
Do not change the OWE group if association is rejected for any other
reason than WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED to avoid
unnecessary latency in cases where the APs reject association, e.g., for
load balancing reasons.

Signed-off-by: Ashok Kumar <aponnaia@codeaurora.org>
2018-12-02 20:42:09 +02:00
Jouni Malinen
117f586b05 DPP: Remove unused wpas_dpp_remain_on_channel_cb()
This function was apparently never used at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
e22c23382f DPP: Apply testing configuration option to signing of own config
Previous implementation had missed this case of setting configurator
parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 00:26:21 +02:00
Jouni Malinen
8c41734e5d FT: Fix Reassociation Request IEs during FT protocol
The previous implementation ended up replacing all pending IEs prepared
for Association Request frame with the FT specific IEs (RSNE, MDE, FTE)
when going through FT protocol reassociation with the wpa_supplicant
SME. This resulted in dropping all other IEs that might have been
prepared for the association (e.g., Extended Capabilities, RM Enabled
Capabilities, Supported Operating Classes, vendor specific additions).

Fix this by replacing only the known FT specific IEs with the
appropriate values for FT protocol while maintaining other already
prepared elements.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Jouni Malinen
3d1d469195 Fix indentation level
This gets rid of smatch warnings about inconsistent indenting.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 21:28:19 +02:00
Ashok Ponnaiah
fcb3f11e4d SAE: Fix external authentication on big endian platforms
Need to handle the little endian 16-bit fields properly when building
and parsing Authentication frames.

Fixes: 5ff39c1380 ("SAE: Support external authentication offload for driver-SME cases")
Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-11-30 17:26:26 +02:00
Jouni Malinen
a00d65e79f DPP: Reject invalid no-psk/pass legacy configurator parameters
Instead of going through the configuration exchange, reject invalid
legacy configurator parameters explicitly. Previously, configuring
legacy (psk/sae) parameters without psk/pass resulted in a config object
that used a zero length passphrase. With this change, that config object
is not sent and instead, either the initialization attempts is rejected
or the incoming initialization attempt is ignored.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 17:14:49 +02:00
Cedric Izoard
18a0508a41 external-auth: Check key_mgmt when selecting SSID
When selecting SSID to start external authentication procedure also
check the key_mgmt field as several network configuration may be defined
for the same SSID/BSSID pair. The external authentication mechanism is
only available for SAE.

Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
2018-11-26 19:09:25 +02:00
Jouni Malinen
931f7ff656 DPP: Fix GAS client error case handling
The GAS client processing of the response callback for DPP did not
properly check for GAS query success. This could result in trying to
check the Advertisement Protocol information in failure cases where that
information is not available and that would have resulted in
dereferencing a NULL pointer. Fix this by checking the GAS query result
before processing with processing of the response.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:33:39 +02:00
Lubomir Rintel
d7591aab85 dbus: Expose availability of SHA384 on D-Bus
This lets us know whether we can attempt to use FT-EAP-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
eb7e747931 dbus: Expose availability of FT on D-Bus
This lets us know whether we can attempt to use FT-PSK, FT-EAP,
FT-EAP-SHA384, FT-FILS-SHA256 or FT-FILS-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Jouni Malinen
4929d556cc mesh: Add Category and Action field to maximum buffer length
Make the buf_len calculation match more closely with the following
wpa_buf*() operations. The extra room from the existing elements was
apparently sufficiently large to cover this, but better add the two
octet header explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-24 13:36:54 +02:00
Bob Copeland
25778502d5 mesh: Fix off-by-one in buf length calculation
The maximum size of a Mesh Peering Management element in the case
of an AMPE close frame is actually 24 bytes, not 23 bytes, plus the
two bytes of the IE header (IEEE Std 802.11-2016, 9.4.2.102). Found by
inspection.

The other buffer components seem to use large enough extra room in their
allocations to avoid hitting issues with the full buffer size even
without this fix.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
2018-11-24 13:30:28 +02:00
Davide Caratti
2b7f46f1c7 examples: Fix shellcheck warnings in wps-ap-cli
use 'printf' instead of 'echo -n', to suppress the following warning:

In POSIX sh, echo flags are undefined. [SC2039]

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2018-11-22 15:53:30 +02:00
Jouni Malinen
dc673aec46 HS 2.0: Generate AssocReq OSEN IE based on AP advertisement
Parse the OSEN IE from the AP to determine values used in the AssocReq
instead of using hardcoded cipher suites. This is needed to be able to
set the group cipher based on AP advertisement now that two possible
options exists for this (GTK_NOT_USED in separate OSEN BSS; CCMP or
GTK_NOT_USED in shared BSS case). Furthermore, this is a step towards
allowing other ciphers than CCMP to be used with OSEN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:07:16 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Ilan Peer
170244a1cd SME: Fix order of WPA IE in association request
In case that the protocol used for association is WPA the WPA IE was
inserted before other (non vendor specific) IEs. This is not in
accordance to the standard that states that vendor IEs should be placed
after all the non vendor IEs are placed. In addition, this would cause
the low layers to fail to properly order information elements.

To fix this, if the protocol used is WPA, store the WPA IE and reinsert
it after all the non vendor specific IEs were placed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-20 11:26:13 +03:00
Andrei Otcheretianski
ac0ac1ddfd wpa_supplicant: Fix buffer overflow in roaming_consortiums
When configuring more than 36 roaming consortiums with SET_CRED, the
stack is smashed. Fix that by correctly verifying the
num_roaming_consortiums.

Fixes: 909a948b ("HS 2.0: Add a new cred block parameter roaming_consortiums")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-14 20:47:35 +03:00
Ilan Peer
c04562e67e OWE: Improve discovery of OWE transition mode AP
An OWE AP device that supports transition mode does not transmit the
SSID of the OWE AP in its Beacon frames and in addition the OWE AP does
not reply to broadcast Probe Request frames. Thus, the scan results
matching relies only on Beacon frames from the OWE open AP which can be
missed in case the AP's frequency is actively scanned.

To improve the discovery of transition mode APs, include their SSID in
the scan command to perform an active scan for the SSIDs learned from
the open mode BSSs.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-12 19:59:26 +03:00
Jouni Malinen
a5e6270f25 OWE: Use shorter scan interval during transition mode search
Start scans more quickly if an open BSS advertising OWE transition mode
is found, but the matching OWE BSS has not yet been seen.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 19:59:26 +03:00
Sunil Dutt
91073ccaaa OWE: Attempt more scans for OWE transition SSID if expected BSS not seen
This commit introduces a threshold for OWE transition BSS selection,
which signifies the maximum number of selection attempts (scans) done
for finding OWE BSS.

This aims to do more scan attempts for OWE BSS and eventually select the
open BSS if the selection/scan attempts for OWE BSS exceed the
configured threshold.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 19:59:26 +03:00
Jouni Malinen
baf4c86379 HS 2.0: Request and process OSU Providers NAI List ANQP-element
Extend wpa_supplicant to use a separate OSU_NAI information from OSU
Providers NAI List ANQP-element instead of the OSU_NAI information from
OSU Providers list ANQP-element when connecting to the shared BSS
(Single SSID) for OSU.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:51:51 +03:00
Purushottam Kushwaha
cf94626c50 OWE: Do not try to enable PMF for non-RSN associations
Explicitly set the PMF configuration to 0 (NO_MGMT_FRAME_PROTECTION) for
non-RSN associations. This specifically helps with OWE transition mode
when the network block is configured with PMF set to required, but the
BSS selected is in open mode. There is no point to try to enable PMF for
such an association.

This fixes issues with drivers that use the NL80211_ATTR_USE_MFP
attribute to set expectations for PMF use. The combination of non-RSN
connection with claimed requirement for PMF (NL80211_MFP_REQUIRED) could
cause such drivers to reject the connection in OWE transition mode.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-04 00:26:41 +03:00
Srinivas Dasari
50b77f50e8 DPP: Flush PMKSA if an assoc reject without timeout is received
Flush the PMKSA upon receiving assoc reject event without timeout
in the event data, to avoid trying the subsequent connections
with the old PMKID. Do not flush PMKSA if assoc reject is
received with timeout as it is generated internally from the
driver without reaching the AP.

This extends commit d109aa6cac ("SAE:
Flush PMKSA if an assoc reject without timeout is received") to handle
also the DPP AKM.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-18 13:15:20 +03:00
Jouni Malinen
3ecb8a5203 ANQP: Parse and report Venue URL information
Parse the Venue URL ANQP-element payload and report it with the new
RX-VENUE-URL event messages if the query was done using PMF.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-15 05:17:49 +03:00
Jouni Malinen
075926ec71 HS 2.0: Add alternative OSU_SSID into providers info file
This adds the second SSID (the one used by the shared BSS) for OSU
connection when generating osu-providers.txt. External tools can use
that to configure multiple network profiles for OSU to cover the cases
where transition mode is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-12 02:52:50 +03:00
Beni Lev
077232f603 OCE: Add OCE capability attribute only when associating to an OCE AP
Signed-off-by: Beni Lev <beni.lev@intel.com>
2018-09-02 18:16:30 +03:00
Roee Zamir
2ac4333404 OCE: Send scan parameters when OCE_STA functionality is enabled
If the device supports OCE features and OCE is enabled, set the relevant
scan parameters and FILS Request Parameters element with Max Channel
Time.

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
2018-09-02 18:08:51 +03:00
Roee Zamir
938dd97a84 driver: Add OCE scan parameters
Add a flag to scan parameters that enables OCE scan features. If this
flag is set the device should enable the following features as defined
in the Optimized Connectivity Experience Technical Specification v1.0:
- Overwrite FILS request Max Channel Time with actual value (clause 3.8)
- Send Probe Request frame in high rate (at least 5.5 Mbps) (clause 3.12)
- Probe Request frame Transmission Deferral and Suppression (clause 3.5)
- Accept broadcast Probe Response frame (clause 3.6)

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
2018-09-02 17:53:32 +03:00
Purushottam Kushwaha
20f612d998 DPP: Set group id through DPP_AUTH_INIT or dpp_configurator_params
This enhances DPP_AUTH_INIT, DPP_CONFIGURATOR_SIGN, and SET
dpp_configurator_params to allow optional setting of the DPP groupId
string for a Connector. If the value is not set, the previously wildcard
value ("*") is used by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-30 23:34:00 +03:00
Ankita Bajaj
af835d75b7 FILS: Fix FILS connect failures after ERP key invalidation
If the RADIUS authentication server dropped the cached ERP keys for any
reason, FILS authentication attempts with ERP fails and the previous
wpa_supplicant implementation ended up trying to use the same keys for
all consecutive attempts as well. This did not allow recovery from state
mismatch between the ERP server and peer using full EAP authentication.

Address this by trying to use full (non-FILS) authentication when trying
to connect to an AP using the same ERP realm with FILS-enabled network
profile if the previous authentication attempt had failed. This allows
new ERP keys to be established and FILS authentication to be used again
for the consecutive connections.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-24 16:27:34 +03:00
Jouke Witteveen
1e1245bc8b Fix QoS Mapping ext capab bit setting
Fix the typo in using WPA_DRIVER_FLAGS_QOS_MAPPING to set the QoS Map
bit in Extended Capabilities. The previous implementation ended up
adding this bit even if the driver did not actually indicate support for
the capability.

Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
2018-08-12 16:35:31 +03:00
Jouni Malinen
ecec4878b7 Provide more details of WPA3 modes in wpa_supplicant.conf
Clarify that proto=RSN is used for WPA3 and add the WPA3-Personal name
for SAE and include OWE as a possible key_mgmt value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-01 17:55:50 +03:00
Jouni Malinen
e8cf9fc33f P2P: Use more compact debug print of common group frequencies
Print the list of frequencies on a single line instead of one line per
frequency.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 22:28:05 +03:00
Jouni Malinen
26eac0a998 P2P: Improve common group channel selection if GO needs to be moved
Prefer channels that support VHT80 (and secondarily, HT40 on the same
band) over other common group channels. If no such channel is found,
prefer any channel that uses the same band so that CSA can be used. This
improves the case where a P2P GO needs to move to another channel and
there is no other reason (e.g., preferred channel from the driver or an
already used channel from a virtual interface sharing the same radio) to
pick a specific channel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 22:28:05 +03:00
Jouni Malinen
616178a2ad P2P/AP: More detailed debug prints on HT/VHT parameter selection
This makes it easier to debug why wpa_supplicant selects particular
HT/VHT parameters for AP/P2P GO mode.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 21:40:43 +03:00
Jouni Malinen
88bf44be42 FT: Fix potential NULL pointer dereference in MDE addition
The bss variable in this function might be NULL, so make the FT MDE
addition case conditional on a BSS entry being available.

Fixes: 3dc3afe298 ("FT: Add MDE to assoc request IEs in connect params")
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
d8e8c992cd FT: Add key management value FT-EAP-SHA384 for wpa_supplicant
This allows wpa_supplicant to be configuted to use the SHA384-based FT
AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
8c2715b358 FT: Connection settings for SHA384-based AKM
Extend wpa_supplicant to allow SHA384-based FT AKM to be selected for a
connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Sven Eckelmann
20c2ea412a wpa_supplicant: Fix parsing of max_oper_chwidth
The max_oper_chwidth is parsed in wpa_config_set as INT_RANGE (see
ssid_fields). The actual parsing for INT_RANGE is done by
wpa_config_parse_int which can only store the result as full integer.

max_oper_chwidth is stored as u8 (a single byte) in wpa_ssid. This means
that on little endian systems, the least significant byte of the parsed
value are really stored in the max_oper_chwidth. But on big endian
system, the only most significant byte is stored as max_oper_chwidth.
This means that 0 is always stored because the provided range doesn't
allow any other value for systems with multi-byte-wide integers.

This also means that for common systems with 4-byte-wide integers, the
remaining 3 bytes were written after the actual member of the struct.
This should not have influenced the behavior of succeeding members
because these bytes would have been part of the padding between the
members on most systems.

Increasing its size to a full int fixes the write operations outside of
the member and allows to use the max_oper_chwidth setting on big endian
systems.

Fixes: 0f29bc68d1 ("IBSS/mesh: Add support for VHT80P80 configuration")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-05-31 16:14:28 +03:00
Felix Fietkau
8fd29a0439 mesh: Fix crash with CONFIG_TAXONOMY enabled
wpa_s->ifmsh needs to be allocated using hostapd_alloc_iface() instead
of a direct call to os_zalloc(), otherwise the linked list for station
taxonomy items remains uninitialized, leading to a crash on the first
attempt to traverse that list

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-05-31 13:06:07 +03:00
Jouni Malinen
f5a602168f HS 2.0: Allow OSEN connection to be used in an RSN BSS
This allows a single BSS/SSID to be used for both data connection and
OSU. In wpa_supplicant configuration, the current proto=OSEN
key_mgmt=OSEN combination is now allowing both the old separate OSEN
BSS/IE and the new RSN-OSEN to be used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-29 23:34:22 +03:00
Jouni Malinen
833bb2ab15 FT: Disable PMKSA caching with FT
PMKSA caching with FT is not fully functional, so disable the case for
now, so that wpa_supplicant does not end up trying to connect with a
PMKSA cache entry from another AKM. FT-EAP was already modified long
time ago to not add PMKSA cache entries itself.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-21 22:18:50 +03:00
Jouni Malinen
9be19d0b9c SAE: Add support for using the optional Password Identifier
This extends the SAE implementation in both infrastructure and mesh BSS
cases to allow an optional Password Identifier to be used. This uses the
mechanism added in P802.11REVmd/D1.0. The Password Identifier is
configured in a wpa_supplicant network profile as a new string parameter
sae_password_id. In hostapd configuration, the existing sae_password
parameter has been extended to allow the password identifier (and also a
peer MAC address) to be set. In addition, multiple sae_password entries
can now be provided to hostapd to allow multiple per-peer and
per-identifier passwords to be set.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Jouni Malinen
d6a65a83fb mesh: Register msg_ctx for hostapd/AP code
The use of hostapd code for a mesh interface did not register
hapd->msg_ctx. This needs to be done similarly to the existing cases in
wpa_supplicant AP and IBSS mode uses so that wpa_msg() calls from the
hostapd/AP code get delivered properly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:22:48 +03:00
Jouni Malinen
ffff7f7095 OWE: Mark connection failed in the unlikely no-bss-entry case
If no BSS entry can be found when processing association rejected event
from the driver for the special OWE case of unsupported
finite-cyclic-group, process the event as a connection failure instead
of just skipping the the OWE retry with another DH group.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 19:01:23 +03:00
Jouni Malinen
0cc41ee635 Move wpa_supplicant_event() EVENT_ASSOC_REJECT handling into a function
This cleans up the implementation a bit by making this functionality
easier to understand.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 18:52:17 +03:00
Srinivas Dasari
16d5c9637c OWE: Get the bss from bssid of assoc_reject to try for next group
On an assoc_reject from the BSS with the status=77, a connection attempt
with the next supported group happens. The BSS considered here is from
current_bss which may be NULL at this point of time with SME-in-driver
case. Address this by getting the BSS from the bssid obtained in
association reject indication and skip the step if no BSS entry can be
found.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Srinivas Dasari
d109aa6cac SAE: Flush PMKSA if an assoc reject without timeout is received
Flush the PMKSA upon receiving association reject event without timeout
in the event data in SME-in-driver case to avoid trying to use the old
PMKSA entry in subsequent connection attempts. Do not flush PMKSA if
association reject is received with timeout as it is generated
internally from the driver without reaching the AP. This is similar to
the SME-in-wpa_supplicant case that was already addressed within
sme_event_assoc_reject().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00