Commit graph

2935 commits

Author SHA1 Message Date
Jouni Malinen
e7ba4e2c74 wlantest: Add counters for AP deauth/disassoc while asleep/awake
These can be used to check whether the STA is in power save mode
and because of that, is not seeing disconnection notifications.
2011-01-07 16:52:56 +02:00
Jouni Malinen
7e7a57ae3f wlantest: Track station PS state 2011-01-07 15:54:58 +02:00
Jouni Malinen
01b397dd94 wlantest: Add more details for replay debug messages
These make it easier to find the frame in question when looking at
the capture in Wireshark.
2011-01-07 14:17:08 +02:00
Jouni Malinen
6c6ad81f9c WPS: Make WPS-AP-AVAILABLE* events a bit more consistent
The BSS table entries may be in more or less random order and it is
better to show the most likely WPS configuration method in a way that is
somewhat more consistent instead of just showing the method of the first
BSS entry found in the table.
2011-01-05 11:49:03 +02:00
Jouni Malinen
62a0255c1f wlantest: Skip frames inserted by wlantest when reading pcap file
This makes debug output clearer when re-reading a file that has
previously been processed and decrypted by wlantest.
2011-01-05 10:41:51 +02:00
Jouni Malinen
fb8f5fc6fd wlantest: Count number of STA ACK'ed Deauth/Disassoc frames 2011-01-03 19:28:40 +02:00
Jouni Malinen
1da4da6f76 wlantest: Add ping_ok_first_assoc STA counter
This can be used to verify whether ping goes through between
clearing of the STA counters and the first (re)association.
2011-01-03 16:54:14 +02:00
Jouni Malinen
df83fb7d00 Fix wpa_supplicant_ssid_bss_match() handler for non-WPA
The proto configuration may be left to non-zero when moving from one
configuration to another. To avoid misidentifying a network
configuration as enabling WPA, check key_mgmt field, too.
2010-12-30 18:27:33 +02:00
Shan Palanisamy
dcc8bf7808 atheros: Rename "madwifi_" prefix to "atheros_" 2010-12-30 16:14:28 +02:00
Yi Zhu
23763c6516 bsd: Fix receive buffer alignment issue
wpa_supplicant seems to crash from time to time on a NetBSD 4.0 MIPS
platform. The root cause turned out to be a MIPS alignment issue.

In my wpa_supplicant crash case, in function
wpa_driver_bsd_event_receive (from driver_bsd.c), the buf[2048] address
is started from i.e. 0x7fffd546, which is not 4 bytes aligned. Later
when it is casted to (struct if_msghdr *), and rtm->rtm_flags is used.
rtm->rtm_flags is "int" type, but its address is not 4 bytes aligned.
This is because the start address of rtm is not 4 bytes aligned.
Unfortunately in NetBSD MIPS kernel (unlike Linux MIPS kernel emulates
unaligned access in its exception handler), the default behavior is to
generate a memory fault to the application that accesses unaligned
memory address. Thus comes the early mentioned wpa_supplicant crash. An
interesting note is when I'm using the wpa_supplicant version 0.4.9, I
never saw this problem. Maybe the stack layout is different. But I
didn't look into details.

I used below patch to resolve this problem. Now it runs correctly for at
least several hours. But you might have a better fix (maybe we can use
malloc/free so that it is at least cache line aligned?). I'm also not
sure if other drivers should have the same problem.
2010-12-30 16:13:19 +02:00
Yi Zhu
9f2951d2fd Fix driver_bsd.c compile error
I got an error for WPA_KEY_RSC_LEN is not defined when compiling the
driver_bsd.c on NetBSD 4.0. Below patch fixed it.
2010-12-30 16:12:32 +02:00
Jouni Malinen
3ac17eba31 P2P: Add initial support for driver-based P2P management
This adds partial callbacks and events to allow P2P management to be
implemented in a driver/firmware. This is not yet complete and is
very much subject to change in the future.
2010-12-30 12:48:55 +02:00
Jouni Malinen
f981eabcf0 WPS: Add option to disable open networks by default
CONFIG_WPS_REG_DISABLE_OPEN=y can be used to configure wpa_supplicant
to disable open networks by default when wps_reg command is used to
learn the current AP settings. When this is enabled, there will be a
WPS-OPEN-NETWORK ctrl_iface event and the user will need to explicitly
enable the network (e.g., with "select_network <id>") to connect to
the open network.
2010-12-30 12:28:13 +02:00
Johannes Berg
5dfca53fc0 nl80211: Use driver-based off-channel TX if available
If the underlying driver supports off-channel TX, it will now be used by
the nl80211 driver wrapper, setting WPA_DRIVER_FLAGS_OFFCHANNEL_TX
accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-29 14:05:34 +02:00
Johannes Berg
190b9062b2 P2P: Add option for offloading off-channel TX to the driver
With the new kernel functionality coming to Linux to allow off-channel
TX, we can take advantage of that in the P2P code that currently uses
remain-on-channel. If a driver advertises support for it, it will be
asked to handle off-channel TX by itself.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-29 13:59:17 +02:00
Johannes Berg
0d7e5a3a29 Allow AP mode to disconnect STAs based on low ACK condition
The nl80211 driver can report low ACK condition (in fact it reports
complete loss right now only). Use that, along with a config option, to
disconnect stations when the data connection is not working properly,
e.g., due to the STA having went outside the range of the AP. This is
disabled by default and can be enabled with disassoc_low_ack=1 in
hostapd or wpa_supplicant configuration file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-28 17:15:01 +02:00
Jouni Malinen
d3e01b9d71 Re-initialize EAP ClientTimeout on for each session
ClientTimeout changes from EAP peer methods were not supposed to
change behavior for other EAP peer methods or even other sessions
of the same method. Re-initialize ClientTimeout whenever an EAP
peer method is initialized to avoid this. This addresses problems
where WPS (EAP-WSC) reduces the timeout and consecutive EAP runs
may fail due to too small timeout.
2010-12-28 12:09:14 +02:00
Fabien Marotte
9dac8c3eaf P2P: Limit the retransmission of GO Negotiation request to 120
If the peer you want to connect to is no longer available (does not
acknowledge frames) when wpa_supplicant sends GO Negotition Request
frames, retransmission of this frame is done until the associated
p2p_device  structure is removed on timeout. In that case, no signal
is emitted to  inform the GO Negotiation has failed.

When sending an Invitation Request frame, the same retransmission
mechanism is in place but limit the transmission to 100 and hitting
the limit generates an event.

This patch adds the same mechanism as the one in place for Invitation
Request, but with limit of 120 to match the existing wait_count for
for GO Negotiation.
2010-12-28 11:48:58 +02:00
Jouni Malinen
cc5e390d28 WPS: Require PBC match with wps_pbc that specifies BSSID
The WPS mode was already verified when the AP was configured for
WPA/WPA2, but this was not done with AP that was in open mode.
Fix this by allowing wpa_supplicant_ssid_bss_match() to be called
in non-WPA configuration, too. With this change, wps_pbc BSSID
command will wait until the specified target AP is in active PBC
mode before trying to connect to it.
2010-12-28 08:56:23 +02:00
Jouni Malinen
a8401116e1 wlantest: Add more debug output for frame injection failures 2010-12-21 12:48:53 +02:00
Jouni Malinen
880a97dc5d wlantest: Fix management frame injection
The TDLS special case was supposed to apply to only Data frames.
2010-12-21 12:48:03 +02:00
Jouni Malinen
d19f5fc881 WPS: Include all Config Methods in Probe Request
Do not use active PBC state to figure out which ConfigMethods are
included in Probe Request; instead, include all supported ones.
2010-12-20 12:54:10 +02:00
Jouni Malinen
5e8b237864 Fix CONFIG_SME build without CONFIG_IEEE80211W 2010-12-19 12:44:58 +02:00
Jouni Malinen
79c3124ce5 nl80211: Remove extra \n from debug messages 2010-12-19 12:00:24 +02:00
Jouni Malinen
7d878ca769 Use SA Query procedure to recovery from AP/STA state mismatch
If a station received unprotected Deauthentication or Disassociation
frame with reason code 6 or 7 from the current AP, there may be a
mismatch in association state between the AP and STA. Verify whether
this is the case by using SA Query procedure. If not response is
received from the AP, deauthenticate.

This implementation is only for user space SME with
driver_nl80211.c.
2010-12-19 11:58:00 +02:00
Johannes Berg
5efa9e2a4b P2P: Allow access to group members
Some new code will require access to P2P group members, so add API to
retrieve the number of members and iterate the members themselves.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-17 18:34:16 +02:00
Johannes Berg
0423d090ce P2P: Fix some int size warnings
When u64 != unsigned long, the compiler will give
some warnings. Fix these.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-17 17:09:50 +02:00
Dan Williams
1e6288df6b dbus: Emit property changed events when adding/removing BSSes
The supplicant was not emitting property changed events when the BSSs
property changed.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2010-12-17 15:56:01 +02:00
Johannes Berg
860fddbb41 Allow setting scan_res_handler from the callback function
Some new code I'm working on will need the scan_res_handler assigned all
the time in certain circumstances, so the easiest way is to reset it
within the handler. This is currently prevented by the way the code in
the event handler works -- change that to permit such usage.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-17 15:31:05 +02:00
Johannes Berg
a2810199ec dbus: Fix type in wpa_dbus_dict_begin_string_array
The array's type should be given as the proper
DBUS_TYPE_STRING_AS_STRING, but evidently it
doesn't matter since it's all packed into a
variant type.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-17 15:20:32 +02:00
Sudhakar Swaminathan
45fee6f090 P2P: Cancel group formation timeout on p2p_cancel 2010-12-17 15:06:48 +02:00
Sudhakar Swaminathan
231bbd0375 P2P: Unauthorize pending P2P GO Neg peer on p2p_cancel
If there is a pending GO Negotiation when p2p_cancel is used,
unauthorize the peer to avoid immediate reconnection from being
accepted without a new p2p_connect command.
2010-12-17 15:05:35 +02:00
Sudhakar Swaminathan
0a14e3ec8b P2P: Cancel group formation on PBC overlap
We should cancel group formation completely on PBC overlap instead
of just partially notifying that operations were stopped. There is
no point in waiting for the group formation timeout in this case.
2010-12-17 15:04:14 +02:00
Masashi Honma
4d2ea6a6a9 P2P: Fix wpa_cli help typo 2010-12-17 15:01:28 +02:00
Masashi Honma
2136f48020 nl80211: Stop driver init sooner if the interface does not exist 2010-12-17 13:55:13 +02:00
Jouni Malinen
2397086869 nl80211: Add forgotten deinit code on failure path 2010-12-17 13:49:38 +02:00
Jouni Malinen
278ef89f3f nl80211: Sync definitions with wireless-testing.git 2010-12-17 13:07:32 +02:00
Jouni Malinen
71a7e936e1 wlantest: Fix buffer read overflow on CCMP encryption
The encryption code may write a full AES block to the end of the
buffer, so make sure the temporary buffer is long enough to fit that
data.
2010-12-17 11:02:56 +02:00
Jouni Malinen
4d00fe48e3 wlantest: Fix error path in TDLS-not-found case 2010-12-17 08:26:39 +02:00
Jouni Malinen
30e09b0d75 wlantest: Avoid aliasing a function parameter by renaming local variable 2010-12-17 08:22:07 +02:00
Jouni Malinen
cb384549e2 wlantest: Remove unnecessary validation code
This condition is already checked above when figuring out whether a key
is known and as such, there is no point in keeping this check here.
2010-12-17 08:16:12 +02:00
Jouni Malinen
ef00c78097 wlantest: Replace pcap header directory
The use of the pcap subdirectory seems to be limited to some of the
newer Linux distros only, so use the older paths to pcap.h and
pcap-bpf.h to make wlantest bit more easier to compile on older
systems.
2010-12-17 08:06:52 +02:00
Jouni Malinen
0e42fff3de wlantest: Add counters and AP/direct path validation for TDLS
These can be used to write automated test scripts for verifying
that TDLS STAs are using correct data path.
2010-12-16 19:08:49 +02:00
Jouni Malinen
29ec745719 wlantest: Check FTIE MIC in TDLS Teardown messages 2010-12-16 17:08:00 +02:00
Jouni Malinen
b3a6d9d400 wlantest: Add send command for injecting raw frames
This can be used by external programs (e.g., wlantest_cli) to inject
raw frames (hex dump of the frame header and body). The data can be
requested to be sent as-is or protected with the current key.
2010-12-16 16:11:54 +02:00
Jouni Malinen
b993e77b5b Removed unused variable from non-Linux builds 2010-12-14 17:10:39 +02:00
Jouni Malinen
aca0160548 nl80211: Set cipher suites when using user space SME
Previously, pairwise and group cipher suites were configured only
when kernel SME (nl80211 connect API) was used. However, mac80211
needs this information even in the user space SME case for one
thing: to disable HT when TKIP/WEP is used. Add
NL80211_ATTR_CIPHER_SUITES_PAIRWISE to fix this special case with
user space SME. This allows mac80211 to disable HT properly when
the AP is configured with configuration that is not allowed.
2010-12-13 21:08:53 +02:00
Jouni Malinen
b39f58347d wlantest: Add support for decrypting TDLS frames
Derive TPK based on TDLS TPK Handshake and decrypt frames on the
direct link with TPK-TK.
2010-12-13 11:20:55 +02:00
Jouni Malinen
89c38e32c7 RSN IBSS: RX GTK configuration with nl80211
This add preliminary code for setting the per-STA RX GTK for
RSN IBSS when nl80211 drivers. For some reason, this does not
seem to fully work, but at least driver_nl80211.c is now aware of
what kind of key is being set and the whatever is missing from
making this key configuration go through should be specific to
nl80211/cfg80211.
2010-12-04 20:31:22 -08:00
Jouni Malinen
18d2ba083b nl80211: Generate EVENT_IBSS_RSN_START events
This is needed to trigger start of 4-way handshake when a new STA is
detected in an RSN IBSS.
2010-12-04 18:17:58 -08:00