Commit graph

219 commits

Author SHA1 Message Date
Jouni Malinen
8b138d2826 OWE: PTK derivation workaround in STA mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround=1 network parameter can be used
to enable older behavior mainly for testing purposes. There is no impact
to group 19 behavior, but if enabled, this will make group 20 and 21
cases use SHA256-based PTK derivation which will not work with the
updated OWE implementation on the AP side.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Ahmad Masri
996662250d P2P: Add support for EDMG channels
This allows a P2P connection over P802.11ay EDMG channels to achieve the
highest link speed that the standard allows for channel bonding (CB) up
to CB4.

Let each P2P peer add its EDMG channels to the Supported Channels IE
advertised in P2P GO negotiation. Give EDMG channels priority when peers
negotiate for operating channel.

User may add 'edmg' parameter to p2p_connect, p2p_add_group, and
p2p_invite commands to prefer an EDMG channel for the P2P link. User may
also set p2p_go_edmg=1 in wpa_supplicant configuration file to prefer
EDMG.

When EDMG is used, P2P will try to find the highest channel bonding
supported channel that matches the frequency parameter, if the devices
do not support EDMG, the P2P connection will use a legacy (1-6) 60 GHz
channel.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:13:08 +02:00
Jouni Malinen
8e5e36a184 Clean up base64_{encode,decode} pointer types
Allow any pointer to be used as source for encoding and use char * as
the return value from encoding and input value for decoding to reduce
number of type casts needed in the callers.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-28 16:39:09 +02:00
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Alexei Avshalom Lazar
e8ff22f471 wpa_supplicant: Add EDMG channel configuration parameters
Add two new configuration parameters for wpa_supplicant:
enable_edmg: Enable EDMG capability for STA/AP mode
edmg_channel: Configure channel bonding. In AP mode it defines the EDMG
channel to start the AP on. In STA mode it defines the EDMG channel to
use for connection.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:50:06 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
6816182461 EAP-TEAP peer: Add support for machine credentials using certificates
This allows EAP-TLS to be used within an EAP-TEAP tunnel when there is
an explicit request for machine credentials. The network profile
parameters are otherwise same as the Phase 1 parameters, but each one
uses a "machine_" prefix for the parameter name.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
043de65f1c EAP peer config: Move ocsp param to phase1/phase2
OCSP configuration is applicable to each instance of TLS-based
authentication and as such, the configuration might need to be different
for Phase 1 and Phase 2. Move ocsp into struct eap_peer_cert_config and
add a separate ocsp2 network profile parameter to set this for Phase 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
b99c4cadb7 EAP peer: Move certificate configuration params into shared struct
These parameters for certificate authentication are identical for the
Phase 1 (EAP-TLS alone) and Phase 2 (EAP-TLS inside a TLS tunnel).
Furthermore, yet another copy would be needed to support separate
machine credential in Phase 2. Clean this up by moving the shared
parameters into a separate data struct that can then be used for each
need without having to define separate struct members for each use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:31 +03:00
Jouni Malinen
c724a0a16c EAP peer: Add a concept of a separate machine credential
This is an initial step in adding support for configuring separate user
and machine credentials. The new wpa_supplicant network profile
parameters machine_identity and machine_password are similar to the
existing identity and password, but explicitly assigned for the purpose
of machine authentication.

This commit alone does not change actual EAP peer method behavior as
separate commits are needed to determine when there is an explicit
request for machine authentication. Furthermore, this is only addressing
the username/password credential type, i.e., additional changes
following this design approach will be needed for certificate
credentials.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
d2b2083843 SAE: Allow PMKID to be added into Association Request frame following SAE
IEEE Std 802.11-2016 does not require this behavior from a SAE STA, but
it is not disallowed either, so it is useful to have an option to
identify the derived PMKSA in the immediately following Association
Request frames. This is disabled by default (i.e., no change to previous
behavior) and can be enabled with a global wpa_supplicant configuration
parameter sae_pmkid_in_assoc=1.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-14 17:49:23 +03:00
Ankita Bajaj
ef59f98729 WNM: Provide option to disable/enable BTM support in STA
Add support to disable/enable BTM support using configuration and
wpa_cli command. This is useful mainly for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-14 23:10:51 +03:00
Jouni Malinen
9083ef1355 FT: Allow PMKSA caching to be enabled with FT-EAP
The new wpa_supplicant network profile configuration parameter
ft_eap_pmksa_caching=1 can be used to enable use of PMKSA caching with
FT-EAP for FT initial mobility domain association. This is still
disabled by default (i.e., maintaining previous behavior) to avoid
likely interoperability issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:01:45 +03:00
Jared Bents
841205a1ce OpenSSL: Add 'check_cert_subject' support for TLS server
This patch added 'check_cert_subject' support to match the value of
every field against the DN of the subject in the client certificate. If
the values do not match, the certificate verification will fail and will
reject the user.

This option allows hostapd to match every individual field in the right
order, also allow '*' character as a wildcard (e.g OU=Development*).

Note: hostapd will match string up to 'wildcard' against the DN of the
subject in the client certificate for every individual field.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-11 14:09:45 +02:00
Jouni Malinen
339dc8bd6b WPS: Allow SAE configuration to be added automatically for PSK
The new wpa_supplicant configuration parameter wps_cred_add_sae=1 can be
used to request wpa_supplicant to add SAE configuration whenever WPS is
used to provision WPA2-PSK credentials and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and also with PMF enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:49 +02:00
Jouni Malinen
8f99a3c26a Clear config item writing buffer before freeing it
This buffer may be used to store items like passwords, so better clean
it explicitly to avoid possibility of leaving such items in heap memory
unnecessarily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-05 20:26:22 +02:00
Daniel Golle
0dab477335 Write multi_ap_backhaul_sta to wpa_supplicant config
The network configration option multi_ap_backhaul_sta was added without
adding it to wpa_config_write_network(). Hence the value of this option
was not included when writing the configuration file. Fix this by
including it in wpa_config_write_network().

Fixes: 5abc7823b ("wpa_supplicant: Add Multi-AP backhaul STA support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-01-24 00:27:12 +02:00
Jimmy Chen
a95906f938 P2P: support random interface address
To enhance privacy, generate a random interface for each group.

There are two configurations are introduced:
* p2p_interface_random_mac_addr
  enable interface random MAC address feature, default disable.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:58:30 +02:00
Jimmy Chen
9359cc8483 P2P: Support random device address
To enhance privacy, generate a random device address for P2P interface.
If there is no saved persistent group, it generate a new random MAC
address on bringing up p2p0. If there is saved persistent group, it will
use last MAC address to avoid breaking group reinvoke behavior.

There are two configurations are introduced:
* p2p_device_random_mac_addr
  enable device random MAC address feature, default disable.
* p2p_device_persistent_mac_addr
  store last used random MAC address.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:55:42 +02:00
Peng Xu
5a3319ab1b P2P: Add 802.11ax support for P2P GO
An optional parameter "he" is added to p2p_connect, p2p_group_add, and
p2p_invite to enable 11ax HE support. The new p2p_go_he=1 configuration
parameter can be used to request this to be enabled by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-12 13:09:39 +02:00
Peter Oh
806db174fd mesh: Add VHT_CHANWIDTH_USE_HT to max_oper_chwidth
Channel width in VHT mode refers HT capability when the width goes down
to below 80 MHz, hence add checking HT channel width to its max
operation channel width. So that mesh has capability to select bandwidth
below 80 MHz.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:43:40 +02:00
Andrey Kartashev
e49b78c0d5 mka: Allow configuration of MACsec replay protection
Add new configuration parameters macsec_replay_protect and
macsec_replay_window to allow user to set up MACsec replay protection
feature. Note that according to IEEE Std 802.1X-2010 replay protection
and delay protection are different features: replay protection is
related only to SecY and does not appear on MKA level while delay
protection is something that KaY can use to manage SecY state.

Signed-off-by: Andrey Kartashev <andrey.kartashev@afconsult.com>
2018-12-26 16:42:25 +02:00
Sergey Matyukevich
cdeea70f59 wpa_supplicant: Allow overriding HT STBC capabilities
Allow user to override STBC configuration for Rx and Tx spatial streams.
Add new configuration options to test for HT capability overrides.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2018-12-23 17:25:11 +02:00
Mathy Vanhoef
ce6829c284 OCV: Add wpa_supplicant config parameter
Add wpa_supplicant network profile parameter ocv to disable or enable
Operating Channel Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Jouni Malinen
9be19d0b9c SAE: Add support for using the optional Password Identifier
This extends the SAE implementation in both infrastructure and mesh BSS
cases to allow an optional Password Identifier to be used. This uses the
mechanism added in P802.11REVmd/D1.0. The Password Identifier is
configured in a wpa_supplicant network profile as a new string parameter
sae_password_id. In hostapd configuration, the existing sae_password
parameter has been extended to allow the password identifier (and also a
peer MAC address) to be set. In addition, multiple sae_password entries
can now be provided to hostapd to allow multiple per-peer and
per-identifier passwords to be set.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Jouni Malinen
72b6e5d1e2 Do not remove CCMP group cipher if any CCMP/GCMP cipher is enabled
CCMP group cipher was removed if CCMP was not allowed as a pairwise
cipher when loading a configuration file (but not actually when changing
configuration during runtime). This is needed to avoid issues with
configurations that use the default group cipher (TKIP CCMP) while
modifying pairwise cipher from the default CCMP TKIP) to TKIP. However,
there is not really a need to remove the CCMP group cipher if any GCMP
or CCMP cipher is enabled as a pairwise cipher.

Change the network profile validation routine to not remove CCMP as
group cipher if CCMP-256, GCMP, or GCMP-256 is enabled as a pairwise
cipher even if CCMP is not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:43 +03:00
Jouni Malinen
6311547e7b HS 2.0: Add Roaming Consortium Selection network profile parameter
This adds new roaming_consortium_selection network profile parameter
into wpa_supplicant. This is used to store the OI that was used for
network selection (INTERWORKING_SELECT) based on matching against the
Roaming Consortium OIs advertised by the AP. This can also be used when
using an external component to perform selection.

This commit adds the network profile parameter, but does not yet include
it in (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:56 +03:00
Jouni Malinen
909a948b0f HS 2.0: Add a new cred block parameter roaming_consortiums
This new string parameter contains a comma delimited list of OIs
(hexdump) in a string. This is used to store Hotspot 2.0
PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI. This commit
includes the configuration changes to parse and write the parameter. The
actual values are not yet used in Interworking network selection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:47 +03:00
Danilo Ravotto
19e20c14fb Add ap_isolate configuration option for wpa_supplicant AP mode
Allow client isolation to be configured with ap_isolate inside
wpa_supplicant configuration file.

Signed-off-by: Danilo Ravotto <danilo.ravotto@zirak.it>
2018-02-17 17:48:31 +02:00
Jouni Malinen
3bd35b6816 wpa_supplicant: Fix parsing errors on additional config file
If the -I<config> argument is used and the referenced configuration file
cannot be parsed, wpa_config_read() ended up freeing the main
configuration data structure and that resulted in use of freed memory in
such an error case. Fix this by not freeing the main config data and
handling the error case in the caller.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 12:20:13 +02:00
Dmitry Shmidt
9c5fe742a2 wpa_supplicant: Free config only if it was allocated in same call
If option -I:config points to a non-existing file, the the previously
allocated config must not be freed. Avoid use of freed memory in such an
error case by skipping the incorrect freeing operation.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2018-02-04 12:13:12 +02:00
Jouni Malinen
9e834fc648 EAP-SIM/AKA: Separate identity for MK derivation
This allows a separate configuration parameter (imsi_identity) to be
used in EAP-SIM/AKA/AKA' profiles to override the identity used in MK
derivation for the case where the identity is expected to be from the
last AT_IDENTITY attribute (or EAP-Response/Identity if AT_IDENTITY was
not used). This may be needed to avoid sending out an unprotected
permanent identity information over-the-air and if the EAP-SIM/AKA
server ends up using a value based on the real IMSI during the internal
key derivation operation (that does not expose the data to others).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2018-01-21 11:28:53 +02:00
Jouni Malinen
c1790a5ff8 OWE: Allow station in transition mode to connect to an open BSS
If the OWE network profile matches an open network which does not
advertise OWE BSS, allow open connection. The new owe_only=1 network
profile parameter can be used to disable this transition mode and
enforce connection only with OWE networks.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-21 11:13:01 +02:00
Jouni Malinen
a0bf1b68c0 Remove all PeerKey functionality
This was originally added to allow the IEEE 802.11 protocol to be
tested, but there are no known fully functional implementations based on
this nor any known deployments of PeerKey functionality. Furthermore,
PeerKey design in the IEEE Std 802.11-2016 standard has already been
marked as obsolete for DLS and it is being considered for complete
removal in REVmd.

This implementation did not really work, so it could not have been used
in practice. For example, key configuration was using incorrect
algorithm values (WPA_CIPHER_* instead of WPA_ALG_*) which resulted in
mapping to an invalid WPA_ALG_* value for the actual driver operation.
As such, the derived key could not have been successfully set for the
link.

Since there are bugs in this implementation and there does not seem to
be any future for the PeerKey design with DLS (TDLS being the future for
DLS), the best approach is to simply delete all this code to simplify
the EAPOL-Key handling design and to get rid of any potential issues if
these code paths were accidentially reachable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
Jouni Malinen
a34ca59e4d SAE: Allow SAE password to be configured separately (STA)
The new sae_password network profile parameter can now be used to set
the SAE password instead of the previously used psk parameter. This
allows shorter than 8 characters and longer than 63 characters long
passwords to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-11 23:24:19 +03:00
Jouni Malinen
c77e2ff096 DPP: Remove C-sign-key expiry
This was removed in DPP tech spec v0.2.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 01:17:33 +03:00
Jouni Malinen
ec9f483774 OWE: Support DH groups 20 (NIST P-384) and 21 (NIST P-521) in station
This extends OWE support in wpa_supplicant to allow DH groups 20 and 21
to be used in addition to the mandatory group 19 (NIST P-256). The group
is configured using the new network profile parameter owe_group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-08 17:12:35 +03:00
Sunil Dutt
63bc0ab0ed P2P: Allow GO to advertise Interworking element
This adds new wpa_supplicant configuration parameters (go_interworking,
go_access_network_type, go_internet, go_venue_group, go_venue_type) to
add a possibility of configuring the P2P GO to advertise Interworking
element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-05 14:42:16 +03:00
Jouni Malinen
61a56c1480 Add group_mgmt network parameter for PMF cipher selection
The new wpa_supplicant network parameter group_mgmt can be used to
specify which group management ciphers (AES-128-CMAC, BIP-GMAC-128,
BIP-GMAC-256, BIP-CMAC-256) are allowed for the network. If not
specified, the current behavior is maintained (i.e., follow what the AP
advertises). The parameter can list multiple space separate ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 17:40:02 +03:00
Lior David
3031133983 mesh: Move writing of mesh_rssi_threshold inside CONFIG_MESH
Previously, the code that writes mesh_rssi_threshold to a network block
always executes, but the code that reads it from network block and the
code that initializes it to a default value in a new network block are
inside #ifdef CONFIG_MESH. As a result when writing a config file it
will write mesh_rssi_threshold (since it has a non-default value) and
later fail to read the network block.

Fix this by moving the write code under #ifdef CONFIG_MESH as well.
Note, network blocks which already have mesh_rssi_threshold because of
the bug will still fail to read after the fix.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2017-09-12 17:17:21 +03:00
Ashwini Patil
332aadb8a2 STA: Add OCE capability indication attribute
Add OCE capability indication attribute in Probe Request and
(Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:19:53 +03:00
Jouni Malinen
44d6b272cf DPP: Fix configuration item list
This was supposed to use semicolons, not commas..

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Jouni Malinen
8528994e21 DPP: Automatic network profile creation
wpa_supplicant can now be configured to generate a network profile
automatically based on DPP configuration. The following
dpp_config_processing values can be used to specify the behavior:
0 = report received configuration to an external program for
    processing; do not generate any network profile internally (default)
1 = report received configuration to an external program and generate
    a network profile internally, but do not automatically connect
    to the created (disabled) profile; the network profile id is
    reported to external programs
2 = report received configuration to an external program, generate
    a network profile internally, try to connect to the created
    profile automatically

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-21 18:03:34 +03:00
Jouni Malinen
3c0daa13d5 Make wpa_config_read_blob() easier for static analyzers
While encoded == NULL could happen in the case of an empty blob, that
will result in encoded_len == 0 and base64_decode() not derefencing the
src argument. That seems to be too difficult for some static analyzers,
so to avoid false warnings, explicitly reject the encoded == NULL case
without even trying to base64 decode it. (CID 164709)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:30:45 +03:00
Jouni Malinen
b979caae57 DPP: Network profile parameters for DPP AKM
Extend wpa_supplicant network profile to include parameters needed for
the DPP AKM: dpp_connector, dpp_netaccesskey, dpp_netaccesskey_expiry,
dpp_csign, dpp_csign_expiry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:17 +03:00
Purushottam Kushwaha
43a356b268 Provide option to configure BSSID hint for a network
This exposes user configurable option to set bssid_hint for a network.
bssid_hint indicates which BSS has been found a suitable candidate for
initial association for drivers that use driver/firmware-based BSS
selection. Unlike the bssid parameter, bssid_hint does not limit the
driver from selecting other BSSs in the ESS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-12 00:20:59 +03:00
Masashi Honma
31a856a127 mesh: Make NL80211_MESHCONF_RSSI_THRESHOLD configurable
In some practical cases, it is useful to suppress joining to node in the
distance. The new field mesh_rssi_threshold could be used as RSSI
threshold for joining.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-05-08 16:23:02 +03:00
Jouni Malinen
183d3924cf WPS: Add option for using random UUID
If the uuid configuration parameter is not set, wpa_supplicant generates
an UUID automatically to allow WPS operations to proceed. This was
previously always using an UUID generated from the MAC address. This
commit adds an option to use a random UUID instead. The type of the
automatically generated UUID is set with the auto_uuid parameter: 0 =
based on MAC address (default; old behavior), 1 = random UUID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-13 17:38:55 +03:00
Jouni Malinen
76e20f4fa7 FILS: Add FILS SK auth PFS support in STA mode
This adds an option to configure wpa_supplicant to use the perfect
forward secrecy option in FILS shared key authentication. A new build
option CONFIG_FILS_SK_PFS=y can be used to include this functionality. A
new runtime network profile parameter fils_dh_group is used to enable
this by specifying which DH group to use. For example, fils_dh_group=19
would use FILS SK PFS with a 256-bit random ECP group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 23:20:32 +02:00