Commit graph

49 commits

Author SHA1 Message Date
Jouni Malinen
6abde54555 tests: DISABLE_NETWORK during connection and blacklist behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-29 18:00:26 +03:00
Jouni Malinen
62a766f3b1 tests: Country code string and the third octet
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:11:31 +02:00
Jouni Malinen
47e148592d tests: AP with open mode and use for SELECT_NETWORK freq parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Jouni Malinen
95497a5fc1 tests: BSS Load update failing to get survey data
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-05 16:52:38 +02:00
Jouni Malinen
f38de833e1 tests: AP dropping duplicate management frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-14 01:10:32 +02:00
Jouni Malinen
d1ea80361b tests: AP with open mode and external association
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 12:16:12 +02:00
Michael Braun
80fe420ab2 tests: Verify multicast_to_unicast operation
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:42:46 +02:00
Jouni Malinen
674af173fe tests: AP with open mode and driver operations failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 23:49:44 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
12129dda8e tests: Use cmd_execute() for iw connect command
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "iw connect ..." commands so that this would also work on
remote setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
10e09d8316 tests: Use cmd_execute() for ip link set up/down commands
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "ip link set up/down" commands so that this would also work on
remote setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jouni Malinen
9524e7e5a4 tests: Open network connection with pmf=2
This verifies that pmf=2 is ignored for a non-RSN network while a
network profile specific ieee80211w=2 is enforced.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-06 00:35:08 +03:00
Jouni Malinen
cb285151a9 tests: AP with open mode and STA poll
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Jouni Malinen
6545398aaa tests: AP with open mode and STA statistics
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Janusz Dziedzic
afc26df29c tests: Pass full apdev to add_ap() function (4)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (4) converts the cases that call hostapd.add_ap() from a
helper function that got apdev[i] as an argument.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:12 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
9f052d805d tests: Prepare ap_open_out_of_memory for modified rfkill init path
The rfkill initialization will be moved out from
wpa_driver_nl80211_drv_init() which would break one step in this OOM
test case due to the memory allocation not existing anymore. Fix this by
skipping that OOM step to avoid causing false failures with the
following commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 22:26:18 +02:00
Jouni Malinen
9b35afd6ac tests: Fix OOM eloop_register_sock() test cases with new gcc
gcc 4.8 vs 5.2 seem to compile eloop_register_sock() differently. With
5.2, that function name does not show up in the backtrace since
eloop_sock_table_add_sock() is used without a separate function call.
This broke the memory allocation failure checking in this test case. Fix
this by matching against the eloop_sock_table_add_sock() function which
shows up in the backtrace for both gcc versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:48:16 +02:00
Jouni Malinen
6f2252614c tests: Fix error message for ap_open_out_of_memory
If hostapd AP started unexpectedly, this test case would fail with
NameError due to incorrect variable name being used to construct the
exception text.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:23:35 +02:00
Johannes Berg
10a15590f8 tests: Add a simple wmediumd test
If wmediumd is available on the path, test that it can forward
packets between two virtual nodes and that stopping it makes
the regular in-kernel datapath do the needed work again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Jouni Malinen
bcf4e38c5f tests: AP with open mode and REASSOCIATE not finding a match
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 12:23:19 +02:00
Jouni Malinen
e1246a6e2c tests: Make ap_open_select_twice less likely to fail
It looks like a previous P2P test case can cause the initial single
channel scan in ap_open_select_twice take more than five seconds in some
cases. While that is not really expected behavior, this test case should
not fail. Increase the timeout to avoid reporting false failures here.

This could be triggered with the following test case sequence:
p2p_msg_unexpected_go_neg_resp ap_open_select_twice

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 20:14:06 +02:00
Jouni Malinen
6fb8b4bf84 tests: AP with open mode and select network twice
This verifies that the second SELECT_NETWORK for the same network starts
a new scan immediately if the previous connection attempt is waiting for
the next scan iteration to start.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 00:48:25 +02:00
Jouni Malinen
f59b946e39 tests: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK
ap_open_sta_enable_disable verifies that DISABLE_NETWORK that is issued
while connect/sme-connect radio work is pending is effective, i.e.,
prevents connection to disabled network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:49 +03:00
Jouni Malinen
a3704b2aae tests: Use the new CTRL-EVENT-NETWORK-NOT-FOUND in ap_open_select_any
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 11:09:22 +03:00
Jouni Malinen
6838452db8 tests: Invalid WMM Action frame
This is a regression test case for a AP mode WMM Action frame parsing
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
a14a5f244a tests: Disable and re-enable hostapd interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 12:57:37 +02:00
Jouni Malinen
7041c16d5a tests: Open mode connection and SELECT_NETWORK to change network
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 15:56:11 +02:00
Johannes Berg
d0007ac9d7 tests: Add test to check disconnect in powersave
The kernel had two bugs (one in hwsim and one more important one in
mac80211) in this area, add a test to make sure we can disconnect
without any kernel issues while in powersave.

Also make sure that the TIM bit gets set and cleared again (by checking
with tshark.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-21 16:07:52 +02:00
Jouni Malinen
f245b45075 tests: Fix ap_{open,wpa2_psk}_wpas_in_bridge cleanup
Due to a copy-paste error, these test cases left 4addr mode enabled on
wlan5. This resulted in number of connect_cmd_* test cases failing if
executed after the wpas_in_bridge tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:50:06 +02:00
Jouni Malinen
eb88a5ba74 tests: hostapd and external ifconfig down + up
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 10:31:12 +02:00
Jouni Malinen
c5b535ed1d tests: hostapd and start_disabled=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 19:57:46 +02:00
Jouni Malinen
a1512a0cc7 tests: wpa_supplicant and station interface in a bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 17:28:08 +02:00
Jouni Malinen
c2096d9981 tests: bssid_blacklist and bssid_whitelist
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
fff95bb614 tests: hostapd interface setup and memory allocation failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:48 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
5a631ad2c2 tests: Optimize ap_open_unexpected_assoc_event
Replace fixed sleep with waiting for a disconnection event. In addition,
remove unnecessary use of sudo.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
4181c3964d tests: BSS Load updates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:11 +03:00
Jouni Malinen
ce9c8c4097 tests: Use internal DATA_TEST_* functionality instead of hwsim_test
This replaces use of the external hwsim_test tool for most data
connectivity test cases. Only the cases where a special interface
(bridge/VLAN) is used are still executed through hwsim_test.

The internal DATA_TEST_* functionality makes it easier to extend the
connectivity test cases through an external device with real WLAN
hardware instead of the hwsim test setup. In addition, the error reports
from this code can be made more informative.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Jouni Malinen
9a921f9a84 tests: Verify behavior on unexpected association event
This verifies association event processing in case the association was
not requested by wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 13:35:03 +03:00
Jouni Malinen
4bf1413ea9 tests: SELECT_NETWORK any
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
26cf800d11 tests: id_str in network configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
f0b7218f7a tests: Association timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
c8503088ea tests: Reconnect to the same BSS on inactivity disconnection
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
81699e2e6e tests: Unknown Action frame category
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 17:07:22 +02:00
Jouni Malinen
eebad21495 tests: Connection during large packet loss
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 16:48:00 +02:00
Jouni Malinen
5a92bda635 tests: Verify open mode AP functionality
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 22:59:38 +02:00