Commit graph

5872 commits

Author SHA1 Message Date
Jouni Malinen
0aca5d1361 tests: Verify NAI Realm list with multiple realms in one entry
In addition, use TTLS/PAP to increase testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
e209eb989c tests: Verify Interworking network selection based on roaming consortium
In addition, use PEAP as the EAP method to increase testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
459e96cd3b tests: Interworking network select with simulated SIM/USIM
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
84262feffd tests: Verify behavior on malformed GAS responses
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
fe871e48b8 tests: Verify failure status code processing in GAS/ANQP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
d9474958d7 tests: Clean up GAS/ANQP message processing
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
18dd2af04b tests: Use helper functions for GAS test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
bfe375ec77 tests: Verify behavior on incorrect GAS response type
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
2cace98ee1 tests: Add a GAS query timeout test case
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
6ffa1687ee Add GAS-QUERY-START and GAS-QUERY-DONE event messages
External programs can use these new control interface events to better
track progress of GAS operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
93827f456a hostapd: Allow external management frame processing or testing
This enables more convenient protocol testing of station side
functionality in various error cases and unexpected sequences without
having to implement each test scenario within hostapd.
ext_mgmt_frame_handle parameter can be set to 1 to move all management
frame processing into an external program through control interface
events (MGMT-RX and MGMT-TX-STATUS) and command (MGMT_TX).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
e4a44b3c09 tests: Add a GAS comeback delay test case
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
8426a1474a tests: Verify Wi-Fi Display operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
3a64d523fa tests: Increase test coverage on BSS command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
2cdd91d8b1 tests: Verify sharing and unsharing of ANQP results
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
8175854e6e tests: Use shorter Interworking element for larger coverage
Since the venue information in the Interworking element is optional,
include both the cases of it included and not included in the test
cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
0589f40146 tests: Use a single channel scan to avoid unnecessary full scans
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
fee5234284 Allow channel list to be specified for SCAN command
The new freq=<frequency ranges> parameter to the SCAN command can be
used to request a scan to be performed on the specified set of channels
instead of on all channels. For example, "wpa_cli scan
freq=2400-2500,5180" would scan channels 1-14 and 36. Only the channels
that the driver indicates as enabled and that are within the specified
ranges are included in the request.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
98eda9c26d Move int_array helpfer functions to utils/common.c
These can be useful outside scan.c, so make them available.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
715bf904ff tests: Verify Interworking Probe Request filtering
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
ae98e1f5b2 wlantest: Add a BSS probe_response counter
This can be used to verify whether an AP replies to a Probe Request
frame.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
f4bfa2d27f tests: Allow gcov to be used when running test cases within vm
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
a4cfb48694 Add make lcov-html to generate code coverage report
In addition, update build rules to compile object files in the same
directory as the source code file if CONFIG_CODE_COVERAGE=y is set to
make lcov find the source code files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
0eff1ab3cb tests: Add test cases for various ciphers
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 11:17:32 +02:00
Jouni Malinen
bee25cc932 nl80211: Fetch cipher capabilities from the driver
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 11:07:58 +02:00
Jouni Malinen
4daa011be4 Clean up cipher capability prints
Use an array of ciphers and a loop instead of copy-pasted copies of the
same printing functionality for each cipher.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 10:44:06 +02:00
Jouni Malinen
35c200624e Convert wpa_hexdump functions to use void pointer instead of u8 *
This removes need for ugly typecasts for some debug prints.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 23:12:37 +02:00
Jouni Malinen
5f9c134ab4 Remove obsolete license notifications
These files have been distributed only under the BSD license option
since February 2012. Clarify the license statements in the files to
match that to avoid confusion.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:59:52 +02:00
Jouni Malinen
bd1e328047 Android: Remove old WEXT extensions
Android has moved to nl80211, so no need to maintain these old WEXT
extensions in wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:52:18 +02:00
Jouni Malinen
bad5cdf491 Verify that beacon setup succeeds before proceeding
There is no point in starting the AP operations unless
the driver can be successfully configured to beacon.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:46:20 +02:00
Jouni Malinen
7d7f7be2e5 Verify group key configuration for WPA group
If configuration of the group key to the driver fails, move the WPA
group into failed state and indication group setup error to avoid cases
where AP could look like it is working even through the keys are not set
correctly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:38:16 +02:00
Jouni Malinen
30675c3416 Add definitions for new cipher suites from IEEE Std 802.11ac-2013
This adds initial parts for supporting the new GCMP-256, CCMP-256,
BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:21:04 +02:00
Jouni Malinen
13b24a766f VHT: Use status code 104 to indicate VHT required
IEEE Std 802.11ac-2013 defines a status code for this, so use that
instead of the unspecified reason.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 21:19:45 +02:00
Jouni Malinen
65249f6c4a tests: Verify QoS Mapping results in Data frames
This verifies that IP packets with various DSCP values are mapped to the
correct TID both with default mapping and with custom QoS mappings.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 20:21:58 +02:00
Jouni Malinen
99d7c1dedf wlantest: Add per-TID RX/TX counters
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 20:21:27 +02:00
Jouni Malinen
24dbd2813c hwsim_test: Allow TOS/DSCP field to be set from command line
This makes it easier to test how Data frames are mapped to different
ACs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 14:31:52 +02:00
Jouni Malinen
991e31cd66 hwsim_test: Use a valid IPv4 header in the test frame
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 14:18:14 +02:00
Jouni Malinen
eaca46532f hwsim_test: Use unsigned bit variables
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 13:42:26 +02:00
Moshe Benji
ab41595f35 wpa_supplicant: Fix crash when terminating all interfaces
In wpa_supplicant_terminate_proc(), while iterating and
terminating interfaces, after an interface is terminated,
we can no longer access its memory as it is no longer valid
and causes a crash.

Fix this by saving the pointer to the next interface before freeing
the current one to avoid accessing an invalid memory location.

Signed-hostap: Moshe Benji <moshe.benji@intel.com>
2013-12-24 08:29:28 +02:00
Andrei Otcheretianski
76aab0305c Add secondary channel IE for CSA
If secondary channel is provided for CSA, advertise it in the Secondary
Channel Offset element in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:27:28 +02:00
Andrei Otcheretianski
8f4713c5c9 Store entire CS freq_params and not only freq
When CSA flow starts, store the entire struct hostapd_freq_params and
not only CS frequency as it was before. The additional freq_params are
required to advertise CS supplementary IEs such as secondary channel,
wide bandwidth CS, etc.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:23:40 +02:00
Andrei Otcheretianski
13daed58c7 Include driver.h in hostapd.h
This allows use of structs (and not only pointers) defined in drivers.h.
Remove also some not needed forward declarations and redundant includes.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:22:37 +02:00
Johannes Berg
a12d34546a wpa_supplicant: Use monotonic time for last_scan check
This just serves to check if there was a scan within
the last 5 seconds, hence it should use monotonic time.
While at it, also use os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:21:18 +02:00
Johannes Berg
51bffab117 WPS: Use monotonic time for AP connection attempt
This is only used for a debug message, but that message prints
the time since the last attempt, so it should use monotonic
time instead of wall clock.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:19:47 +02:00
Johannes Berg
6473e5c842 wpa_supplicant: Use relative time for TKIP Michael MIC failures
The MMIC failure code should use monotonic time to check
whether 60 seconds have elapsed or not. For type-safety,
use struct os_reltime for the timestamp variable, and
also convert to using os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:18:47 +02:00
Johannes Berg
4e1eae1dff wpa_supplicant: Use monotonic time for temp-disabled networks
Temporarily disabled networks are disabled for a certain
duration, so the code should use monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:01:59 +02:00
Johannes Berg
151ab808fa P2P: Use monotonic time for GO client waiting
GO activation can fail if the first client doesn't connect
within a certain time, but this should not be dependent on
wall time -- use monotonic time instead.

While at it, use os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 08:00:03 +02:00
Johannes Berg
3326f19355 IBSS RSN: Use monotonic time for reinit detection
The reinit detection skips reinit when the time since the own
authentication frame TX is less than half a second, so it shouldn't
be affected by wall time and use monotonic time instead.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:58:21 +02:00
Johannes Berg
196a217403 WPS_UPNP: Use monotonic time for event debouncing
The event debouncing isn't very accurate (since it doesn't
take sub-second resolution into account), but it should use
monotonic time anyway since it doesn't care about the wall
clock.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:57:10 +02:00
Johannes Berg
864c9afa6d wps_registrar: Use monotonic time for PBC workaround
The PBC ignore-start workaround just needs to check whether
the time is within 5 seconds, so should use monotonic time.

While at it, add a few more ifdefs to clearly separate the
code and variables needed.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:54:40 +02:00