Commit graph

1399 commits

Author SHA1 Message Date
Jouni Malinen
dd025790e5 tests: IBSS on 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 19:35:19 +03:00
Jouni Malinen
8cc9bc0775 tests: WNM BSS Transition Management in different countries
This increases testing coverage for ieee802_chan_to_freq*() functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 18:11:14 +03:00
Jouni Malinen
6d01255e57 tests: GAS/ANQP query and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:17:33 +03:00
Michael Braun
54cf411f4c tests: Verify correct VLAN operation in multi-BSS multi-VLAN case
This adds hwsim test ap_vlan_iface_cleanup_multibss. It connects two
stations in different BSS but the same hostapd process. First both
stations are in VLAN 1, then they get reauthenticated into VLAN 2. Due
to the ordering of the stations moving around, this test checks that
bridge and tagged interface referencing counting is done globally, such
that the tagged interface is not removed too early and no bridge is
left over.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-06-14 13:40:50 +03:00
Jouni Malinen
13b3497245 tests: D-Bus Reconnect command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 11:38:14 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Jouni Malinen
ee19ba74cd tests: P2P GO and 5 GHz channels 165 (allowed) and 169 (disallowed) in US
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 20:54:01 +03:00
Jouni Malinen
c518fecc82 tests: Pending GAS query interrupted with deinit
These are regression test cases for a segmentation fault issue (use of
freed memory) where interface removal happened while a gas-query item
was pending.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 02:57:34 +03:00
Jouni Malinen
1a5041791e tests: Create a P2P persistent group with ADD_NETWORK
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 00:02:05 +03:00
Jouni Malinen
3a59cda1d0 tests: D-Bus WPS/PBC operation and signal for PBC overlap
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 20:51:30 +03:00
Jouni Malinen
ee120ff381 Remove [MU-BEAMFORMEE] option from hostapd vht_capab parameter
The standard hardcodes the MU Beamformee Capable subfield is hardcoded
to 0 when transmitting by an AP, so there is no need to provide a
configuration parameter for setting this to one.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 13:41:54 +03:00
Jouni Malinen
f5d5161db1 tests: Allow D-Bus GONegotiationRequest signal to include extra argument
This is needed to allow the GO Intent argument to be added without
breaking these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-06 18:16:19 +03:00
Jouni Malinen
d4518fe8ed tests: More WPA2-EAP + PMF test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-06 17:13:21 +03:00
Jouni Malinen
98c71cf6b5 tests: Control interface behavior on scan SSID parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-05 15:55:26 +03:00
Jouni Malinen
d6f6a86a04 tests: wps_priority in configuration and WPS behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-04 14:04:16 +03:00
Jouni Malinen
f572ae809a tests: D-Bus P2P Cancel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 21:13:31 +03:00
Jouni Malinen
2a8e3f35ef tests: D-Bus WPS Cancel operation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 21:00:02 +03:00
Jouni Malinen
be43588a3c tests: P2P group re-invocation with invitation response getting lost
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 13:34:22 +03:00
Jouni Malinen
571a1af270 tests: D-Bus FindStopped signal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-25 18:31:09 +03:00
Jouni Malinen
efe353d1aa tests: UPDATE_BEACON to change vendor_elements at runtime
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 13:43:30 +03:00
Jouni Malinen
5e0bedc63c tests: EAP-EKE with server OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 13:36:16 +03:00
Jouni Malinen
f7e3c17b68 tests: WPA2-Enterprise connection using EAP-EKE with serverid NAI
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 12:48:52 +03:00
Jouni Malinen
b4b2f300db tests: ERP with EAP-EKE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 12:01:25 +03:00
Jouni Malinen
5748d1e5f8 tests: EAP-TTLS with server certificate valid beyond UNIX time 2^31
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 11:24:35 +03:00
Jouni Malinen
768ea0bc32 tests: DH params with 2048-bit key
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 11:03:42 +03:00
Jouni Malinen
75e41ab78a tests: Automatic channel selection with chanlist set
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 10:43:44 +03:00
Jouni Malinen
38ad1ea317 tests: Fix persistent_group_per_sta_psk for P2P Device case
The dev[1] <--> dev[2] data connectivity test was using incorrect
function. dev[2] is also using a P2P group and as such, can have a
different group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:20 +03:00
Jouni Malinen
36e6633415 tests: Fix go_neg_with_bss_connected with P2P Device
Group interface name was fetched from the results of an incorrect group
formation and because of this, group removal failed in case P2P Device
is used and dev[1] ends up getting different group ifname for the
groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:16 +03:00
Jouni Malinen
f033200e94 tests: Add P2P Device support for persistent_group
The network operations need to use the global control interface to be
performed on the interface that stores the network profiles for
persistent groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:11 +03:00
Ben Rosenfeld
622ef15b77 tests: Update group_ifname after group start
After P2P-GROUP-STARTED event, use group_form_result in order to update
the group_ifname for the device. This is needed when using P2P Device
for managing P2P operations which results in a separate group interface
being used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:32:34 +03:00
Ben Rosenfeld
6f27f79084 tests: Use list_networks with p2p=true in test_p2p_channel
In case that there is a need to list the persistent P2P networks,
the global control interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:31:05 +03:00
Ben Rosenfeld
9766d403a6 tests: Change persistent_go_client_list to use global interface
Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:30:45 +03:00
Ben Rosenfeld
85ef1f4345 tests: Use global interface in persistent_group_invite_removed_client
When removing a persistent P2P group, global interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:29 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
d7e2d79b1a tests: Change persistent_group_per_sta_psk to use global interface
This is required for cases that a dedicated P2P Device interface
is used and then the event will happen on the global interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:25 +03:00
Ben Rosenfeld
cbeab59c9f tests: Change test_p2p_persistent to use the global control interface
Send request to set persistent_reconnect on the global control
interface so it would also work when using a dedicated P2P Device
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:04 +03:00
Ben Rosenfeld
cf5d768b33 tests: Change p2p_device_nfc_invite to use global interface
When testing P2P invitation flow, setting the NFC selector
should be done using the global control interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:35:29 +03:00
Ben Rosenfeld
cc259e2650 tests: Change p2p_device_misuses() to use group interface
Calling "DISASSOCIATE" should be done on the group interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:30:40 +03:00
Ilan Peer
6420643d45 tests: Skip some tests in P2PS when a dedicated P2P Device is used
Some tests in test_p2ps.py test a scenario where a separate P2P
group interface is not used. However, this is not a valid case
when a dedicated P2P Device interface is used, as in such a case
a separate group interface must be used.

Handle this by skipping such tests in case a dedicated P2P Device is
used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-07 21:19:38 +03:00
Ilan Peer
5cef80647e tests: Fix test_p2ps.py to save group results
Call group_form_result() whenever a new group is started, so that
group_ifname gets updated and later, the group can be removed when
needed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-07 21:17:31 +03:00
Ben Rosenfeld
09f60224a5 tests: Remove all P2P networks in call to reset
When resetting a device, remove all the P2P networks to prevent
unexpected behavior in following tests. This is needed for the case
where P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:14:31 +03:00
Ben Rosenfeld
6f96fdaefb tests: Change test_p2p_messages to use global interface
This is required for cases where P2P Device is used and the event
happens on the global interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:11:03 +03:00
Ben Rosenfeld
eb1d68eff0 tests: Change set_country() to use the global interface to get event
This is required for cases that multiple interfaces are used and the
event can happen on any of them, for example when a dedicated P2P Device
interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:09:29 +03:00
Ben Rosenfeld
91d3483273 tests: Change p2p_set_ssid_postfix to use the group interface for SSID
This is required for cases where thea P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:07:20 +03:00
Ben Rosenfeld
3d5b1a6452 tests: Fix test_ap_pmf to use own_addr
The tests used p2p_dev_addr that can be different from own_addr,
if a dedicated P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:02:37 +03:00
Jouni Malinen
6838452db8 tests: Invalid WMM Action frame
This is a regression test case for a AP mode WMM Action frame parsing
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
b204753115 tests: WPS HTTP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00
Jouni Malinen
c53a3f29cd tests: IBSS RSN regression test for IBSS_RSN prior IBSS setup
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 17:15:45 +03:00
Jouni Malinen
f0174bff85 tests: Fix EAP-SIM/AKA protocol tests to use full header
Couple of the EAP-SIM/AKA protocol test cases were leaving out the
Reserved field. This was not intentional since these test cases were
targeting a specific Subtype processing instead of verifying truncated
header case (which is covered separately). Add the Reserved field to
allow the implementation to add an explicit, earlier check for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 16:32:59 +03:00